| Scalar Object |
| attCNMefrConfigEntry | .1.3.6.1.4.1.74.2.15.8.1.1 |
An entry containing configuration information
for a particular Frame Relay interface. |
| attCNMefrMeasEntry | .1.3.6.1.4.1.74.2.15.8.2.1 |
An entry containing measurement counts, maintained
during the specified measurement interval, for a
particular Frame Relay interface. |
| attCNMefrPVCConfigEntry | .1.3.6.1.4.1.74.2.15.8.3.1 |
An entry containing configuration information
for a particular Frame Relay interface. |
| attCNMefrPVCMeasEntry | .1.3.6.1.4.1.74.2.15.8.4.1 |
An entry containing measurement counts, maintained
during the specified measurement interval, for a
particular PVC on a specific Frame Relay interface. |
| attCNMefrPVCStatusEntry | .1.3.6.1.4.1.74.2.15.8.5.1 |
An entry containing status information about
a particular Data Link Connection on a specific
Frame Relay interface. |
| Tabular Object |
| attCNMefrConfigIndex | .1.3.6.1.4.1.74.2.15.8.1.1.1 |
A unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance. |
| attCNMefrMgmtType | .1.3.6.1.4.1.74.2.15.8.1.1.2 |
This variable identifies the PVC management scheme
being used to manage this Frame Relay interface.
A value of auto-set(1) indicates that the interface
automatically adopts the scheme being used by the
access device. A value none(5) indicates that PVC
management procedures are disabled on this interface. |
| attCNMefrPollDirection | .1.3.6.1.4.1.74.2.15.8.1.1.3 |
This variable specifies the role the Frame Relay
interface performs in a bi-directional PVC
management scheme. A value of receive(1) means that
this interface simply responds to Status Enquiries
and a value of send(2) means that this interface
initiates Status Enquiries. A value of both(3) means
that this interface performs both functions.
This variable applies only if the type of PVC
management scheme being used is not auto-set (see
the attCNMefrMgmtType object). |
| attCNMefrFullStatusPoll | .1.3.6.1.4.1.74.2.15.8.1.1.4 |
This variable identifies the maximum number
of Status Enquiry intervals that pass before
issuance of a Full Status Enquiry message.
This counter is referred to as N391 in the ANSI
standard.
This variable applies only if the PVC management
procedures are enabled. See attCNMefrMgmtType object
for more details. |
| attCNMefrErrorThreshold | .1.3.6.1.4.1.74.2.15.8.1.1.5 |
This variable identifies the maximum number
of errored events that can occur before declaring
the Frame Relay interface down. An errored event
is the non-receipt of a Status Enquiry, or the
receipt of a Status Enquiry with an invalid sequence
number.
This counter is referred to as N392 in the ANSI
standard.
The value for this counter cannot exceed the
value of the monitored events counter (see the
attCNMefrMonitoredEvents object). |
| attCNMefrMonitoredEvents | .1.3.6.1.4.1.74.2.15.8.1.1.6 |
This variable specifies a value 'm', that is used
with the Error Threshold (attCNMefrErrorThreshold)
to determine link problems. A link problem is
declared when the number of errors in the last
'm' monitored events exceeds the Error Threshold.
This counter is referred to as N393 in the ANSI
standard. |
| attCNMefrIntegrityTimer | .1.3.6.1.4.1.74.2.15.8.1.1.7 |
This variable identifies the number of seconds
between successive Status Enquiry messages.
This timer is referred to as T391 in the ANSI
standard.
This variable is applicable only if this interface
is configured to be the sender of PVC management
polls (see the attCNMefrPollDirection object). |
| attCNMefrPollVerifyTimer | .1.3.6.1.4.1.74.2.15.8.1.1.8 |
This variable specifies the maximum number of
seconds the Frame Relay interface allows between
the receipt of Status Enquiries. The expiration
of this timer is considered to be an errored event.
This timer is referred to as T392 in the ANSI
standard.
This variable is applicable only if this interface is
configured to be the receiver of PVC management polls.
Refer to the attCNMefrPollDirection object to verify
this. |
| attCNMefrLMIFlowControl | .1.3.6.1.4.1.74.2.15.8.1.1.9 |
If the PVC management scheme being used is LMI,
then this variable indicates whether this Frame
Relay interface uses XON/XOFF as a means of
congestion avoidance.
This technique is defined in Revision 1.0 of the
LMI Specification 'Frame Relay Specification with
Extensions'. |
| attCNMefrSupportedPVCs | .1.3.6.1.4.1.74.2.15.8.1.1.10 |
This variable specifies the number of DLCIs
currently supported on this Frame Relay interface. |
| attCNMefrMeasMaxIntervals | .1.3.6.1.4.1.74.2.15.8.1.1.11 |
This variable identifies the maximum number
of measurement intervals supported for the
measurements maintained by this Frame Relay
interface in the attCNMefrMeasTable. |
| attCNMefrMeasIntervalLen | .1.3.6.1.4.1.74.2.15.8.1.1.12 |
This variable identifies the number of seconds
that make up one complete measurement interval for
for the measurements maintained by this Frame Relay
interface in the attCNMefrMeasTable. |
| attCNMefrMeasIndex | .1.3.6.1.4.1.74.2.15.8.2.1.1 |
A unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance. |
| attCNMefrMeasInterval | .1.3.6.1.4.1.74.2.15.8.2.1.2 |
This variable identifies the measurement interval
number for which measurement is provided. It is a
number between 1 and XX, where 1 identifies the most
recently completed measurement interval and XX is
the least recently completed measurement interval.
The value of XX is specified by the
attCNMefrMeasMaxIntervals object given in the
attCNMefrConfigTable.
The maximum length of each measurement interval is
specified by the attCNMefrMeasIntervalLen object given
in the attCNMefrConfigTable. |
| attCNMefrMeasTimeStamp | .1.3.6.1.4.1.74.2.15.8.2.1.3 |
The time stamp corresponding to the end of the
specified measurement interval, as measured in
seconds from 00:00:00 UTC (Coordinated Universal
Time) January 1, 1970. Any fraction is rounded up. |
| attCNMefrMeasLocalTime | .1.3.6.1.4.1.74.2.15.8.2.1.4 |
The time stamp corresponding to the end of the
specified measurement interval. Any fraction is
rounded up. It is given as a printable ASCII string
showing the local time at the end of the interval. |
| attCNMefrReceivedOctets | .1.3.6.1.4.1.74.2.15.8.2.1.5 |
The counter associated with the number of bytes
received by this Frame Relay interface during the
specified measurement interval. |
| attCNMefrSentOctets | .1.3.6.1.4.1.74.2.15.8.2.1.6 |
The counter associated with the number of bytes
sent by this Frame Relay interface during the
specified measurement interval. |
| attCNMefrReceivedFrames | .1.3.6.1.4.1.74.2.15.8.2.1.7 |
The counter associated with the number of frames
received by this Frame Relay interface during the
specified measurement interval. |
| attCNMefrSentFrames | .1.3.6.1.4.1.74.2.15.8.2.1.8 |
The counter associated with the number of frames
sent by this Frame Relay interface during the
specified measurement interval. |
| attCNMefrBadFrames | .1.3.6.1.4.1.74.2.15.8.2.1.9 |
The counter associated with the number of frames
received by this Frame Relay interface that are
faulty. The interface discards bad frames received.
A bad frame could be a frame with a non-integral
number of octets, or an aborted frame, or a frame
with a bad Frame Check Sequence (FCS), or a frame
that exceeds the maximum frame size. |
| attCNMefrReceiverOverruns | .1.3.6.1.4.1.74.2.15.8.2.1.10 |
The counter associated with the number of receiver
overruns occurred at this Frame Relay interface
during the specified measurement interval.
A receiver overrun occurs when frames are received
faster than they can be stored and forwarded. |
| attCNMefrIngressUtil | .1.3.6.1.4.1.74.2.15.8.2.1.11 |
The counter associated with the utilization level
of the Frame Relay interface, derived as the total
bytes received (in the ingress direction) divided by
the line speed of the interface, over the measurement
interval. |
| attCNMefrEgressUtil | .1.3.6.1.4.1.74.2.15.8.2.1.12 |
The counter associated with the utilization level
of the Frame Relay interface, derived as the total
bytes sent (in the egress direction) divided by the
line speed of the interface, over the measurement
interval. |
| attCNMefrPVCConfigIfIndex | .1.3.6.1.4.1.74.2.15.8.3.1.1 |
A unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance. |
| attCNMefrPVCConfigIndex | .1.3.6.1.4.1.74.2.15.8.3.1.2 |
The DLCI number on a Frame Relay interface that
identifies a unique Data Link Connection. |
| attCNMefrPVCServiceType | .1.3.6.1.4.1.74.2.15.8.3.1.3 |
This variable specifies whether the DLCI is a
multicast or PVC (unicast) DLCI. A PVC DLCI is
used to connect a specific endpoint to another
endpoint, whereas a multicast DLCI allows an
endpoint to transmit single frames to this Frame
Relay interface and have them delivered to multiple
destinations. |
| attCNMefrLocalCIR | .1.3.6.1.4.1.74.2.15.8.3.1.4 |
This variable specifies the Committed Information
Rate (CIR) for data transmitted on this PVC from
the local device through the network via this Frame
Relay interface. The maximum value for the CIR is
limited to the line speed of this interface. |
| attCNMefrLocalCommittedBurst | .1.3.6.1.4.1.74.2.15.8.3.1.5 |
This variable specifies the Committed Burst (Bc)
for data transmitted on this PVC from the local
device through the network via this Frame Relay
interface. |
| attCNMefrLocalExcessBurst | .1.3.6.1.4.1.74.2.15.8.3.1.6 |
This variable specifies the Excess Burst (Be)
for data transmitted on this PVC from the local
device through the network via this Frame Relay
interface. |
| attCNMefrRemoteCIR | .1.3.6.1.4.1.74.2.15.8.3.1.7 |
This variable specifies the Committed Information
Rate (CIR) for data transmitted on this PVC from
the remote device, through the network, to the local
device via this Frame Relay interface. The maximum
value for the CIR is limited to the line speed of
this interface. |
| attCNMefrRemoteCommittedBurst | .1.3.6.1.4.1.74.2.15.8.3.1.8 |
This variable specifies the Committed Burst (Bc)
for data transmitted on this PVC from the remote
device, through the network, to the local device
via this Frame Relay interface. |
| attCNMefrRemoteExcessBurst | .1.3.6.1.4.1.74.2.15.8.3.1.9 |
This variable specifies the Excess Burst (Be)
for data transmitted on this PVC from the remote
device, through the network, to the local device
via this Frame Relay interface. |
| attCNMefrMulticastGroup1 | .1.3.6.1.4.1.74.2.15.8.3.1.10 |
A multicast (group) DLCI that includes this
DLCI as one of its members. Any messages
addressed to this multicast DLCI will
be sent to this PVC and to other PVCs that
belong in this group.
A unicast DLCI can be a member of at most 4 groups.
This variable identifies the first multicast DLCI
that includes this DLCI as its member. |
| attCNMefrMulticastGroup2 | .1.3.6.1.4.1.74.2.15.8.3.1.11 |
A multicast (group) DLCI that includes this
DLCI as one of its members. Any messages
addressed to this multicast DLCI will
be sent to this PVC and to other PVCs that
belong in this group.
A unicast DLCI can be a member of at most 4 groups.
This variable identifies the second multicast DLCI
that includes this DLCI as its member. |
| attCNMefrMulticastGroup3 | .1.3.6.1.4.1.74.2.15.8.3.1.12 |
A multicast (group) DLCI that includes this
DLCI as one of its members. Any messages
addressed to this multicast DLCI will
be sent to this PVC and to other PVCs that
belong in this group.
A unicast DLCI can be a member of at most 4 groups.
This variable identifies the third multicast DLCI
that includes this DLCI as its member. |
| attCNMefrMulticastGroup4 | .1.3.6.1.4.1.74.2.15.8.3.1.13 |
A multicast (group) DLCI that includes this
DLCI as one of its members. Any messages
addressed to this multicast DLCI will
be sent to this PVC and to other PVCs that
belong in this group.
A unicast DLCI can be a member of at most 4 groups.
This variable identifies the fourth multicast DLCI
that includes this DLCI as its member. |
| attCNMefrPVCMeasMaxIntervals | .1.3.6.1.4.1.74.2.15.8.3.1.14 |
This variable identifies the maximum number
of measurement intervals supported for the
measurements maintained by this Frame Relay
interface in the attCNMefrPVCMeasTable. |
| attCNMefrPVCMeasIntervalLen | .1.3.6.1.4.1.74.2.15.8.3.1.15 |
This variable identifies the number of seconds
that make up one complete measurement interval for
for the measurements maintained by this Frame Relay
interface in the attCNMefrPVCMeasTable. |
| attCNMefrPVCMeasIfIndex | .1.3.6.1.4.1.74.2.15.8.4.1.1 |
A unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance. |
| attCNMefrPVCMeasIndex | .1.3.6.1.4.1.74.2.15.8.4.1.2 |
The DLCI number on a Frame Relay interface that
identifies a unique Data Link Connection. |
| attCNMefrPVCMeasInterval | .1.3.6.1.4.1.74.2.15.8.4.1.3 |
This variable identifies the measurement interval
number for which measurement is provided. It is a
number between 1 and XX, where 1 identifies the most
recently completed measurement interval and XX is
the least recently completed measurement interval. |
| attCNMefrPVCMeasTimeStamp | .1.3.6.1.4.1.74.2.15.8.4.1.4 |
The time stamp corresponding to the end of the
specified measurement interval, as measured in
seconds from 00:00:00 UTC (Coordinated Universal
Time) January 1, 1970. Any fraction is rounded up. |
| attCNMefrPVCMeasLocalTime | .1.3.6.1.4.1.74.2.15.8.4.1.5 |
The time stamp corresponding to the end of the
specified measurement interval. Any fraction is
rounded up. It is given as a printable ASCII string
showing the local time at the end of the interval. |
| attCNMefrPVCReceivedFrames | .1.3.6.1.4.1.74.2.15.8.4.1.6 |
The counter associated with the number of
frames received by this Frame Relay PVC during
the specified measurement interval. |
| attCNMefrPVCSentFrames | .1.3.6.1.4.1.74.2.15.8.4.1.7 |
The counter associated with the number of
frames sent by this Frame Relay PVC during
the specified measurement interval. |
| attCNMefrDiscardEligibilityFrames | .1.3.6.1.4.1.74.2.15.8.4.1.8 |
The counter associated with the number of
ingress frames received by this PVC that exceed
the Committed Burst Size but don't exceed the
maximum throughput configured for the PVC (the
Committed Burst Size plus the Excess Burst Size).
In addition, all ingress frames with the Discard
Eligible (DE) Indicator bit set are included
in this count. |
| attCNMefrBurstSizeExceeded | .1.3.6.1.4.1.74.2.15.8.4.1.9 |
The counter associated with the number of
frames that were discarded due to exceeding the
maximum throughput configured for the PVC (the
Committed Burst Size plus the Excess Burst Size).
If the Committed Information Rate (CIR) has not
been configured for the PVC, then this field is
not applicable. |
| attCNMefrCongestionAtIngress | .1.3.6.1.4.1.74.2.15.8.4.1.10 |
The counter associated with the number of times
frames received by this PVC had to be discarded
because buffers were unavailable or congestion
control was being enforced during the specified
measurement interval. |
| attCNMefrCongestionAtEgress | .1.3.6.1.4.1.74.2.15.8.4.1.11 |
The counter associated with the number of times
frames sent by this PVC had to be discarded
because buffers were unavailable or congestion
control was being enforced during the specified
measurement interval. |
| attCNMefrPVCStatusIfIndex | .1.3.6.1.4.1.74.2.15.8.5.1.1 |
A unique value for each Frame Relay interface.
The interface identified by a particular value of
this index is the same interface as identified by
the same value of an attCNMifConfigIndex object
instance. |
| attCNMefrPVCStatusIndex | .1.3.6.1.4.1.74.2.15.8.5.1.2 |
The DLCI number on a Frame Relay interface that
identifies a unique Data Link Connection. |
| attCNMefrPVCAdminStatus | .1.3.6.1.4.1.74.2.15.8.5.1.3 |
The desired state of this Data Link Connection. |
| attCNMefrPVCOperStatus | .1.3.6.1.4.1.74.2.15.8.5.1.4 |
The current operational state of this Data Link
Connection. |
| Table |
| attCNMefrConfigTable | .1.3.6.1.4.1.74.2.15.8.1 |
A list of entries containing configuration
information for all Frame Relay interfaces managed by
this system. |
| attCNMefrMeasTable | .1.3.6.1.4.1.74.2.15.8.2 |
A list of entries containing measurement counts,
maintained during the specified measurement interval,
for all Frame Relay interfaces managed by this
system. |
| attCNMefrPVCConfigTable | .1.3.6.1.4.1.74.2.15.8.3 |
A list of entries containing configuration
information for all Frame Relay interfaces managed by
this system. |
| attCNMefrPVCMeasTable | .1.3.6.1.4.1.74.2.15.8.4 |
A list of entries containing PVC-level measurement
counts, maintained during the specified measurement
interval, for all the Frame Relay interfaces managed
by this system. |
| attCNMefrPVCStatusTable | .1.3.6.1.4.1.74.2.15.8.5 |
A list of entries containing status information
about Data Link Connections on Frame Relay interfaces
managed by this system. |
| Object Identifier |
| att-2 | .1.3.6.1.4.1.74 |
| att-products | .1.3.6.1.4.1.74.1 |
| att-mgmt | .1.3.6.1.4.1.74.2 |
| att-cnmAgent | .1.3.6.1.4.1.74.1.9 |
| att-cnm | .1.3.6.1.4.1.74.2.15 |
| att-cnm-efr | .1.3.6.1.4.1.74.2.15.8 |