Enterasys Networks Inc. - CT-CONTAINER-MIB

CT-CONTAINER-MIB DEFINITIONS ::= BEGIN

        --  ct-container-mib.txt
        --  Revision: 1.02.01
        --  Part Number:  
        --  Date:  March 26, 1998

        --  Cabletron Systems, Inc.
        --  35 Industrial Way, P.O. Box 5005
        --  Rochester, NH 03867-0505
        --  (603) 332-9400
        --  support@ctron.com

        --  This module provides authoritative definitions for Cabletron's
        --  enterprise-specific container MIB..
        --
        --  This module will be extended, as needed.
        --

        --  Cabletron Systems reserves the right to make changes in 
        --  specification and other information contained in this document 
        --  without prior notice.  The reader should consult Cabletron Systems
        --  to determine whether any such changes have been made.
        --
        --  In no event shall Cabletron Systems be liable for any incidental, 
        --  indirect, special, or consequential damages whatsoever (including 
        --  but not limited to lost profits) arising out of or related to this
        --  document or the information contained in it, even if Cabletron
        --  Systems has been advised of, known, or should have known, the 
        --  possibility of such damages.
        --
        --  Cabletron grants vendors, end-users, and other interested parties
        --  a non-exclusive license to use this Specification in connection
        --  with the management of Cabletron products.

        --  Copyright August 95 Cabletron Systems

        IMPORTS
                NetworkAddress, Counter, TimeTicks
                        FROM RFC1155-SMI
                ctChassis2
                        FROM CTRON-MIB-NAMES
                DisplayString
                        FROM RFC1213-MIB
                OBJECT-TYPE
                        FROM RFC-1212;

        --  This MIB module uses the extended OBJECT-TYPE macro as defined
        --  RFC 1212

        --  Textual convention

        --  DisplayString ::= OCTET STRING
        --  This data type is used to model textual information taken from
        --  the NVT ASCII character set.  By convention, objects with this
        --  syntax, unless explicitly stated, are declared as having:
        --
        --  SIZE (0..255)

        --  containerTypeDevice is, in generic terms, similar to sysObjectID in
        --  MIB-II.  It is defined for the sake of completeness, and
        --  in order to negate dependencies on other MIBs.

        --===============   Group Definitions          ===================

        contType                OBJECT IDENTIFIER  ::= { ctChassis2 1 }
        contLogical             OBJECT IDENTIFIER  ::= { ctChassis2 2 }
        contPhysical            OBJECT IDENTIFIER  ::= { ctChassis2 3 }
        contResource            OBJECT IDENTIFIER  ::= { ctChassis2 4 }
        contCommStr             OBJECT IDENTIFIER  ::= { ctChassis2 5 }
        contAddress             OBJECT IDENTIFIER  ::= { ctChassis2 6 }
        contTypeID              OBJECT IDENTIFIER  ::= { ctChassis2 7 }

        --===============    contType group          ===================

        contTypeDevice  OBJECT-TYPE
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Identifies the type of device or container. This
                 could be a chassis, module, a standalone box etc.
                 A vendor's authoritative identification of this
                 device or container.  By convention, this value is
                 allocated within the SMI enterprises subtree(1.3.6.1.4.1),
                 and provides an easy and unambiguous means for
                 determining `what kind of box' is being managed.  If this
                 information is not present or unknown, its value should
                 be set to the contUnknownTypeID, which is defined below."
            ::= { contType 1 }

        contTypePhysicalEntries  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Number of slots in the device.  For bounded, slot-less
                 systems, the value of this object shall be zero(0)."
            ::= { contType 2 }

        contTypePhysicalChanges  OBJECT-TYPE
            SYNTAX   Counter
            ACCESS   read-only
            STATUS   mandatory
            DESCRIPTION
                "Depicts the number of physical changes that have occured
                 to this MIB.  This includes additions and
                 removal of components in the component table."
            ::= { contType 3 }

        contTypeLogicalChanges  OBJECT-TYPE
            SYNTAX   Counter
            ACCESS   read-only
            STATUS   mandatory
            DESCRIPTION
                "Depicts the number of logical changes that have occured
                 to this MIB.  This includes all sets to name strings etc."
            ::= { contType 4 }

        contTypeSerialNumber OBJECT-TYPE
            SYNTAX      DisplayString
            ACCESS      read-only
            STATUS      mandatory
            DESCRIPTION
                "Reflects the revision level of the device.  If no
                serial number is available for the device then this
                object will be the zero length string."
            ::= { contType 5 }

        contTypeContainingDevice  OBJECT-TYPE
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Identifies the type of device or container that 
                 this device or containeris installed or contained.
                 A vendor's authoritative identification of this
                 container or device.  By convention, this value is
                 allocated within the SMI enterprises subtree(1.3.6.1.4.1),
                 and provides an easy and unambiguous means for
                 determining `what kind of box' .  If this
                 information is not present or unknown, its value should
                 be set to the OBJECT IDENTIFIER { 0 0 }, which is a
                 syntactically valid object identifier."
            ::= { contType 6 }

        contTypeContainingPhysicalEntries OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Number of slots in the container in which the device is
                 installed.  For bounded, slot-less
                 systems, the value of this object shall be zero(0)."
            ::= { contType 7 }

        contTypeContainingPhysicalEntryID  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The slot number in a container in which the device is
                 installed. If the slot number is unknown then this value
                 will be zero."
            ::= { contType 8 }

        contTypeContainingSerialNumber          OBJECT-TYPE
            SYNTAX      DisplayString
            ACCESS      read-only
            STATUS      mandatory
            DESCRIPTION
                "Reflects the revision level of the device or container
                 in which this device is installed.  If no
                 serial number is available for the device or container
                 then this object will be the zero length string."
            ::= { contType 9 }

--===============    contLogicalEntry group          ====================

        --  Component Table and Definitions
        --  Components are instances of functional devices.  For
        --  example, if two routers and three bridges were installed
        --  in a container, said container accommodates five components.

        contLogicalEntryTable  OBJECT-TYPE
            SYNTAX  SEQUENCE OF ContLogicalEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A list of components installed in this container."
            ::= { contLogical 1 }

        contLogicalEntry  OBJECT-TYPE
            SYNTAX  ContLogicalEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A component entry containing objects for a particular
                 component."
            INDEX   { contLogicalEntryID }
            ::= { contLogicalEntryTable 1 }

        ContLogicalEntry  ::= 
            SEQUENCE {
                contLogicalEntryID              INTEGER,
                contLogicalEntryType            OBJECT IDENTIFIER,
                contLogicalEntryName            DisplayString,
                contLogicalEntryVersion         DisplayString,
                contLogicalEntryROCommStr       OCTET STRING,
                contLogicalEntryRWCommStr       OCTET STRING,
                contLogicalEntrySUCommStr       OCTET STRING,
                contLogicalEntryAdminStatus     INTEGER,
                contLogicalEntryOperStatus      INTEGER
            }

        contLogicalEntryID  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "An unique value identifying a component, which includes,
                 but is not limited to, routers, bridges, and terminal
                 servers.  Multiple instances of a functional device may
                 exist within the same container."
            ::= { contLogicalEntry 1 }

        contLogicalEntryType  OBJECT-TYPE
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Identifies a component within this container.  A vendor's
                 authoritative identification of this component type.
                 By convention, this value is allocated within the SMI
                 enterprises subtree(1.3.6.1.4.1), and provides an easy
                 and unambiguous means for determining the component
                 type.  If this information is not present or unknown,
                 its value should be set to the OBJECT IDENTIFIER { 0 0 },
                 which is a syntactically valid object identifier."
            ::= { contLogicalEntry 2 }

        contLogicalEntryName  OBJECT-TYPE
            SYNTAX  DisplayString (SIZE (0..32))
            ACCESS  read-only 
            STATUS  mandatory
            DESCRIPTION
                "A textual description of the component."
            ::= { contLogicalEntry 3 }

        contLogicalEntryVersion  OBJECT-TYPE
            SYNTAX  DisplayString (SIZE (0..32))
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "A textual description of the version/revision level for
                 this component's software."
            ::= { contLogicalEntry 4 }

        contLogicalEntryROCommStr  OBJECT-TYPE
            SYNTAX  OCTET STRING
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "This is defined as the read only community string to
                 access MIBs registered to this component."
            ::= { contLogicalEntry 5 }

        contLogicalEntryRWCommStr  OBJECT-TYPE
            SYNTAX  OCTET STRING
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "This is defined as the read write community string to
                 access MIBs registered to this component."
            ::= { contLogicalEntry 6 }

        contLogicalEntrySUCommStr  OBJECT-TYPE
            SYNTAX  OCTET STRING
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "This is defined as the super user community string to
                 access MIBs registered to this component."
            ::= { contLogicalEntry 7 }

        contLogicalEntryAdminStatus     OBJECT-TYPE
            SYNTAX  INTEGER {
                        enable(3),
                        disable(7),
                        reset(9)
                }
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                ""
            ::= { contLogicalEntry 8 }

        contLogicalEntryOperStatus      OBJECT-TYPE
            SYNTAX  INTEGER {
                        unknown(1),             --  none of the following
                        invalid(2),
                        enabled(3),
                        testing(4),
                        operational(5),
                        error(6),
                        disabled(7),
                        delete(8)
                }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                ""
            ::= { contLogicalEntry 9 }

        --===============    contPhysicalEntry group  ====================

        --  Slot Table and definitions
        --  A module is the physical entity that resides in a container slot.
        --  A module may be a board or card or even a chassis.A component may
        --  be realized by one or more modules, or one or more components
        --  may be realized by the same module.
        --  The slot table provides a physical representation of a container
        --  and its components.

        contPhysicalEntryTable  OBJECT-TYPE
            SYNTAX  SEQUENCE OF ContPhysicalEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A list of modules installed in this container.  A component,
                 such as a router, may be incorporated on one or more
                 modules.  More than one component may be incorporated on
                 each module."
            ::= { contPhysical 1 }

        contPhysicalEntry  OBJECT-TYPE
            SYNTAX  ContPhysicalEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A slot entry containing objects for a particular
                 module."
            INDEX  { contPhysicalEntryID }
            ::= { contPhysicalEntryTable 1 }

        ContPhysicalEntry  ::=
            SEQUENCE {
                contPhysicalEntryID             INTEGER,
                contPhysicalEntries             INTEGER,
                contPhysicalEntryClass          OBJECT IDENTIFIER,
                contPhysicalEntryType           OBJECT IDENTIFIER,
                contPhysicalEntryTimeStamp      TimeTicks,
                contPhysicalEntryStatus         INTEGER
            }

        contPhysicalEntryID  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The slot number containing this module."
            ::= { contPhysicalEntry 1 }

        contPhysicalEntries     OBJECT-TYPE
            SYNTAX      INTEGER
            ACCESS      read-only
            STATUS      mandatory
            DESCRIPTION
                "The number of slots that this module occupies.  Some
                modules require more than one physical front panel slot
                while only using a single backpanel slot.  In this case
                this object will reflect the number of slots occupied
                by the physical module.  This object will have a value
                of 1 for all single slot modules."
            ::= { contPhysicalEntry 2 }

        contPhysicalEntryClass  OBJECT-TYPE
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The class (or type) of slot.  For example, in a chassis
                slots that only allow for power supply modules fall into
                a class that is different from slots that allow only 
                interface cards."
            ::= { contPhysicalEntry 3 }

        contPhysicalEntryType  OBJECT-TYPE
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Uniquely defines the module type.  A vendor's
                 authoritative identification for a module.  By
                 convention, this value is allocated within the SMI
                 enterprises subtree(1.3.6.1.4.1), and provides an easy
                 and unambiguous means for determining the type of
                 module."
            ::= { contPhysicalEntry 4 }

        contPhysicalEntryTimeStamp  OBJECT-TYPE
            SYNTAX  TimeTicks
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The value of sysUpTime for this management entity, when
                 this module was last (re-)initialized."
            ::= { contPhysicalEntry 5 }

        contPhysicalEntryStatus  OBJECT-TYPE
            SYNTAX  INTEGER {
                        reset(1),
                        powerOff(2),
                        busy(3),
                        crippled(4),
                        operational(5),
                        error(6),
                        testing(7),
                        booting(11)
                }
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The module status."
            ::= { contPhysicalEntry 6 }

        --  Pysical to Logical Map Table and definitions
        --  This table specifies the logical entries that reside
    --  in a physical entry.                                                          

        contLogicalToPhysicalMapTable OBJECT-TYPE
            SYNTAX  SEQUENCE OF ContLogicalToPhysicalMapEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A list of components that reside in a container slot.  More 
                 than one component may reside in a container slot." 
            ::= { contPhysical 2 }

        contLogicalToPhysicalMapEntry  OBJECT-TYPE
            SYNTAX  ContLogicalToPhysicalMapEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A slot entry containing the objects for a particular
                 module."
            INDEX  { contPhysicalEntryID, contLogicalEntryID }
            ::= { contLogicalToPhysicalMapTable 1 }

        ContLogicalToPhysicalMapEntry  ::=
            SEQUENCE {
                        contPhysicalEntryMapID  INTEGER,
                        contLogicalEntryMapID   INTEGER
            }

        contPhysicalEntryMapID  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The slot number of a container slot.  An unique
                 value, in the range between 0 and and the value of
                 containerNumSlots.  This object is similiar to 
                 contPhysicalEntryID."
            ::= { contLogicalToPhysicalMapEntry 1 }

        contLogicalEntryMapID  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "The ID value for the component incorporated within this
                 module.  This object is similar to contLogicalEntryID."
            ::= { contLogicalToPhysicalMapEntry 2 }

        --===============    contResource group       ====================

        contResourceTable       OBJECT-TYPE
            SYNTAX      SEQUENCE OF ContResourceEntry
            ACCESS      not-accessible
            STATUS      mandatory
            DESCRIPTION
                "This table defines the potential physical resources that may be
                 utilized by a given physical module within the container."
        ::= { contResource 1 }

        contResourceEntry       OBJECT-TYPE
            SYNTAX      ContResourceEntry
            ACCESS      not-accessible
            STATUS      mandatory
            DESCRIPTION
                "Defines a specific physical resource entry"
            INDEX { contResourceID }
        ::= { contResourceTable 1 }

        ContResourceEntry ::= SEQUENCE {
                contResourceID          INTEGER,
                contResourceType        OBJECT IDENTIFIER,
                contResourceMibPointer  OBJECT IDENTIFIER
                }

        contResourceID          OBJECT-TYPE
                SYNTAX  INTEGER
                ACCESS  read-only
                STATUS  mandatory
                DESCRIPTION
                "A unique index that defines a specific physcial resource for
                 which this relationship exists."
        ::= { contResourceEntry 1 }

        contResourceType                OBJECT-TYPE
            SYNTAX      OBJECT IDENTIFIER
            ACCESS      read-only
            STATUS      mandatory
            DESCRIPTION
                "Defines the type of physical resource for which this
                 relationship is defined."
        ::= { contResourceEntry 2 }

        contResourceMibPointer  OBJECT-TYPE
            SYNTAX      OBJECT IDENTIFIER
            ACCESS      read-only
            STATUS      mandatory
            DESCRIPTION
                "The value of this object defines the start of a MIB that can
                 be used to determine more specific information about
                 the given resource.  This may include information about
                 what physcial modules the resource is connected.  It also
                 may provide specific control information about the
                 physcial resource.  For example for a backplane the MIB
                 may refer contain information on insert/bypass status
                 of any given physical module."
            ::= { contResourceEntry 3 }

        --===============    Community String  group  ===============

        --  This group provides the means to globally
        --  modify the community strings associated with Logical Entries
        --  from both the Chassis Manager and from the Module Manager levels.

        contROCommStr  OBJECT-TYPE
            SYNTAX  OCTET STRING
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "This is defined as the base read only community string to
                 access MIBs in this container or on this module. A write to
                 this object will change all instances of
                 contLogicalEntryROCommStr."
            ::= { contCommStr 1 }

        contRWCommStr  OBJECT-TYPE
            SYNTAX  OCTET STRING
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "This is defined as the read write community string to
                 access MIBs in this container or on this module.A write to
                 this object will change all instances of
                 contLogicalEntryRWCommStr."
            ::= { contCommStr 2 }

        contSUCommStr  OBJECT-TYPE
            SYNTAX  OCTET STRING
            ACCESS  read-write
            STATUS  mandatory
            DESCRIPTION
                "This is defined as the super user community string to
                 access MIBs in this container or on this module.A write to
                 this object will change all instances of 
                 contLogicalEntrySUCommStr."
            ::= { contCommStr 3 }

        -- Container Network Address Table
        -- Maintains and controls the network addresses through
        -- which this entity is managed.

        contNetAddressTable  OBJECT-TYPE
            SYNTAX  SEQUENCE OF ContNetAddressEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "A list of Global network addresses with which this device 
         can be managed."
            ::= { contAddress 1 }

        contNetAddressEntry  OBJECT-TYPE
            SYNTAX  ContNetAddressEntry
            ACCESS  not-accessible
            STATUS  mandatory
            DESCRIPTION
                "An entry containing objects for a particular
                 network address."
            INDEX   { contNetAddressIndex }
            ::= { contNetAddressTable 1 }

        ContNetAddressEntry  ::= 
            SEQUENCE {
                contNetAddressIndex
                        INTEGER,
                contNetAddressNetworkType
                        OBJECT IDENTIFIER,
                contNetAddress
                        NetworkAddress,
                contNetAddressMask
                        NetworkAddress
                }

        contNetAddressIndex  OBJECT-TYPE
            SYNTAX  INTEGER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "An unique value identifying a network address."
            ::= { contNetAddressEntry 1 }

        contNetAddressNetworkType  OBJECT-TYPE
            SYNTAX  OBJECT IDENTIFIER
            ACCESS  read-only
            STATUS  mandatory
            DESCRIPTION
                "Identifies the Network type e.g Inband, etc."
            ::= { contNetAddressEntry 2 }

        contNetAddress                  OBJECT-TYPE
        SYNTAX   NetworkAddress
        ACCESS   read-write
        STATUS   mandatory
            DESCRIPTION
                "Indicates the network address of the device for a 
                 particular network."
            ::= { contNetAddressEntry 3 }

        contNetAddressMask              OBJECT-TYPE
            SYNTAX      NetworkAddress
            ACCESS      read-write
            STATUS      mandatory
            DESCRIPTION
                "Indicates the subnet mask for the network address of the
                 device for a particular network"
            ::= { contNetAddressEntry 4 }

        -- Cont Type Identifiers

        contUnknownTypeID       OBJECT IDENTIFIER  ::= { contTypeID 1 }

END
SNMP MIB Search
