| Scalar Object |
| ctPicNumberEntries | .1.3.6.1.4.1.52.4.1.5.9.1.1 |
Defines the number of PIC modules defined by this MIB. |
| ctPicEntry | .1.3.6.1.4.1.52.4.1.5.9.1.2.1 |
Description of a specific instance of a PIC module. |
| ctPicECOEntry | .1.3.6.1.4.1.52.4.1.5.9.1.3.1 |
Describes a particular PIC ECO entry. |
| ctPicDiagEntry | .1.3.6.1.4.1.52.4.1.5.9.1.5.1 |
Describes a particular PIC Diag entry. |
| ctPicControlEntry | .1.3.6.1.4.1.52.4.1.5.9.1.8.1 |
Describes a particular PIC Control Table entry. |
| Tabular Object |
| ctPicSlot | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.1 |
Specific slot which the module that realizes this PIC
resides. If the PIC is associated with the chassis
and not a specific module then this value will be 0. |
| ctPicIndex | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.2 |
Uniquely identifies the instance of a PIC in a particular
slot. |
| ctPicLocation | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.3 |
Defines location of the PIC chip. This takes on any of
the encoding values defined below for backplane, module,
daughter board, brim. |
| ctPicStatus | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.4 |
Provides the status of the specific PIC chip. the values
are defined as follows:
other(1) - firmware can not determine status
present(2) - PIC seems to be functional
notPresent(3) - PIC not found but expected
checkSum(4) - A check sum error occured
error(5) - An undefined error condition exists.
limited(6) - A limited PIC implementation only
type code information is present. |
| ctPicVersion | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.5 |
Reflects the version of the PIC implementation that this
PIC conforms to. This has the format x.yy . If non-existent,
this object will be set to all blanks(ascii 32). |
| ctPicModuleType | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.6 |
Defines the standard module type value as defined in
ctron-oids. |
| ctPicMfgPN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.7 |
Describes the manufacturing level part number of the module
associated with this PIC. This information is encoded as
follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this object is non-existent, it will be set
to all blanks(ascii 32). |
| ctPicMfgSN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.8 |
Describes the manufacturing level serial number of the module
associated with this PIC. This information is encoded as
follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
3 bytes - Board level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32). |
| ctPicMfgPartNumb | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.9 |
This object presents the part number portion of the
ctPicMfgPN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32). |
| ctPicMfgSerialNumb | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.10 |
This object presents the serial number portion of the
ctPicMfgSN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32). |
| ctPicMfgReworkLocation | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.11 |
The 2 character code that defines the location this
module was last reworked. This object contains the same
information as presented in ctPicMfgPN object however
in a more human readable format. If non-existent, this
object will be set to all blanks(ascii 32). |
| ctPicMfgMfgLocation | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.12 |
The two character code that defines the location
this module was manufactured at. This object contains the same
information as presented in ctPicMfgSN object however
in a more human readable format. If non-existent, this object
will be set to all blanks(ascii 32). |
| ctPicMfgDateCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.13 |
The 3 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicMfgSN
object however in a more human readable format. If
non-existent, this object will be set to all blanks(ascii 32). |
| ctPicMfgRevisionCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.14 |
The 3 character board level revision code field of this
module. This object contains the same information as
presented in ctPicMfgSN object however in a more human
readable format. If non-existent, this object will be set
to all blanks (ascii 32). |
| ctPicTLPN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.15 |
Describes the top level part number of the module associated
with this PIC. This information is encoded as follows:
7 Characters Part Number
2 Characters Rework Location.
If any field of this object is non-existent, it will be set
to all blanks(ascii 32). |
| ctPicTLSN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.16 |
Describes the top level serial number of the module
associated with this PIC. This information is encoded
as follows:
3 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
3 bytes - Top level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32). |
| ctPicTLPartNumb | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.17 |
This object presents the part number portion of the
ctPicTLPN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32). |
| ctPicTLSerialNumb | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.18 |
This object presents the serial number portion of the
ctPicTLSN object. This object contains the same information
however in a more human readable format. If non-existent,
this object will be set to all blanks(ascii 32). |
| ctPicTLReworkLocation | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.19 |
The 2 character code that defines the location this
module was last reworked. This object contains the same
information as presented in ctPicTLPN object however
in a more human readable format. If non-existent, this
object will be set to all blanks(ascii 32). |
| ctPicTLMfgLocation | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.20 |
The two character code that defines the location
this module was manufactured at. This object contains the same
information as presented in ctPicTLSN object however
in a more human readable format. If non-existent, this object
will be set to all blanks(ascii 32). |
| ctPicTLDateCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.21 |
The 3 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicTLSN
object however in a more human readable format. If
non-existent, this object will be set to all blanks(ascii 32). |
| ctPicTLRevisionCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.22 |
The 3 character top level revision code field of this module.
This object contains the same information as presented in
ctPicTLSN object however in a more human readable format.
If non-existent, this object will be set to all blanks
(ascii 32). |
| ctPicPcbRevision | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.23 |
Defines the Cabletron revision of the art work for this
module. If non-existent, this object will be set to all
blanks(ascii 32). |
| ctPicMacAddr | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.24 |
The base MAC address(ethernet format)assigned to the module.
If this field is not used then it should have a value of a
zero length string. If non-existent, this object will be set
to all blanks(ascii 32). |
| ctPicNumbRsvdAddrs | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.25 |
The number of reserved MAC addresses starting at the
address as defined in ctPicMacAddr. If no MAC addresses
are reserved this object should have a value of 0. |
| ctPicBoardRevision | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.26 |
Defines the Cabletron board level revision level code for
this module. If non-existent, this object will be set to
blanks (ascii 32). |
| ctPicModuleTypeString | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.27 |
Describes the module associated with this PIC in a
human readable format. If non-existent, this object
will be set to blanks (ascii 32). |
| ctPicDCDCconverterType | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.28 |
Describes the voltage of the installed DCDC Converter
input and output lines.
If the Module does not contain a DCDC Converter
this object will be set to blanks (ascii 32). |
| ctPicDCDCconvInputPower | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.29 |
Describes the maximum allowed input power
for the DCDC input line.
If the Module does not contain a DCDC Converter
this object will be set to blanks (ascii 32). |
| ctPicSMB1promVersion | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.30 |
Describes the current version of the SMB1 prom.
If the Module does not contain an SMB1 prom
this object will be set to blanks (ascii 32). |
| ctPicAtmMacAddr | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.31 |
The Atm MAC address(atm format)assigned to the chassis.
If this field is not used then it should have a value of a
zero length string. If non-existent, this object will be set
to all blanks(ascii 32). |
| ctPicOEMVendorId | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.32 |
Represents the OEM vendor for a product.
If the Module does not program this value
this object will be set to blanks (ascii 32). |
| ctPicOEMVendorName | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.33 |
ASCII name of the OEM vendor for the product.
If the Module does not program this value
this object will be set to blanks (ascii 32). |
| ctPicMfg97SN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.34 |
Describes the manufacturing level serial number of the module
associated with this PIC. This information is encoded as
follows:
4 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
2 bytes - Board level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32). |
| ctPicMfg97DateCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.35 |
The 4 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicMfg97SN
object however in a more human readable format. If
non-existent, this object will be set to all blanks(ascii 32). |
| ctPicMfg97RevisionCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.36 |
The 2 character board level revision code field of this
module. This object contains the same information as
presented in ctPicMfg97SN object however in a more human
readable format. If non-existent, this object will be set
to all blanks (ascii 32). |
| ctPicTL97SN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.37 |
Describes the top level serial number of the module
associated with this PIC. This information is encoded
as follows:
4 bytes - Date code (year/week)
4 bytes - Serial number
2 bytes - Manufacture location
2 bytes - Top level revision
If any field of this object is non-existent, it will be
set to all blanks(ascii 32). |
| ctPicTL97DateCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.38 |
The 4 byte date code field when this module was last
reworked. This is in year/week format. This object
contains the same information as presented in ctPicTL97SN
object however in a more human readable format. If
non-existent, this object will be set to all blanks(ascii 32). |
| ctPicTL97RevisionCode | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.39 |
The 2 character top level revision code field of this module.
This object contains the same information as presented in
ctPicTL97SN object however in a more human readable format.
If non-existent, this object will be set to all blanks
(ascii 32). |
| ctPicOEMTLSN | .1.3.6.1.4.1.52.4.1.5.9.1.2.1.40 |
Describes the top level serial number of the module as specified
by the OEM for this device. If non-existent, this object will be
set to all blanks (ascii 32). |
| ctPicECOSlot | .1.3.6.1.4.1.52.4.1.5.9.1.3.1.1 |
Specific slot which the module that realizes this PIC
resides. If the PIC is associated with the chassis
and not a specific module then this value will be 0.
This refers to the same slot as identified by ctPicSlot
in ctPicTable. |
| ctPicECOIndex | .1.3.6.1.4.1.52.4.1.5.9.1.3.1.2 |
The specific PIC instance that this ECO entry pertains to.
This refers to the same instance as identified by ctPicIndex
in ctPicTable. |
| ctPicECOID | .1.3.6.1.4.1.52.4.1.5.9.1.3.1.3 |
Uniquely defines the ECO entry that is being described
by this conceptual row. |
| ctPicECONumber | .1.3.6.1.4.1.52.4.1.5.9.1.3.1.4 |
Defines Cabletron's ECO number that describes the revision of
the hardware. This object is organized as follows:
6 Characters ECO Number
2 Characters Rework Location
4 Characters Date Code |
| ctPicDiagSlot | .1.3.6.1.4.1.52.4.1.5.9.1.5.1.1 |
Specific slot which the module that realizes this PIC
resides. If the PIC is associated with the chassis
and not a specific module then this value will be 0.
This refers to the same slot as identified by ctPicSlot
in ctPicTable. |
| ctPicDiagIndex | .1.3.6.1.4.1.52.4.1.5.9.1.5.1.2 |
The specific PIC instance that this Diag entry pertains to.
This refers to the same instance as identified by ctPicIndex
in ctPicTable. |
| ctPicDiagID | .1.3.6.1.4.1.52.4.1.5.9.1.5.1.3 |
Uniquely defines the Diag entry that is being described
by this conceptual row. |
| ctPicDiagResults | .1.3.6.1.4.1.52.4.1.5.9.1.5.1.4 |
Defines Cabletron's Diag results code. |
| ctPicRefresh | .1.3.6.1.4.1.52.4.1.5.9.1.8.1.1 |
Setting this value causes the PIC Driver to clear
cached memory and to reread the PIC chip. This
functionality removes the need for manufacturing
to power cycle a board to ensure proper PIC
programming. Reading this object always returns
a zero (0). |
| Table |
| ctPicTable | .1.3.6.1.4.1.52.4.1.5.9.1.2 |
A table that describes the contents of all PIC modules
accessible by this module. |
| ctPicECOTable | .1.3.6.1.4.1.52.4.1.5.9.1.3 |
Each module that contains a PIC may have several
ECOs performed on it. The ctPicECOTable reflects
a history of the last 5 ECOs that have been performed
on this module. |
| ctPicDiagTable | .1.3.6.1.4.1.52.4.1.5.9.1.5 |
Each module that contains a PIC may have several
Diags performed on it. The ctPicDiagTable reflects
a history of the last 8 Diags that have been performed
on this module.
Important: This table only contains entries diagnostic
entries that are defined. Therefore it is possible for
this table to be empty 'does not respond to a GET or
GET-NEXT' if there are no diagnostic errors present. |
| ctPicControlTable | .1.3.6.1.4.1.52.4.1.5.9.1.8 |
A table allowing management control of PIC
functionality. |
| Object Identifier |
| pic | .1.3.6.1.4.1.52.4.1.5.9.1 |
| ctPicLocationID | .1.3.6.1.4.1.52.4.1.5.9.1.4 |
| ctPicLocationModule | .1.3.6.1.4.1.52.4.1.5.9.1.4.1 |
| ctPicBrim | .1.3.6.1.4.1.52.4.1.5.9.1.4.2 |
| ctPicChassis | .1.3.6.1.4.1.52.4.1.5.9.1.4.3 |
| ctPicDaughter | .1.3.6.1.4.1.52.4.1.5.9.1.4.4 |
| ctPicBackPlane | .1.3.6.1.4.1.52.4.1.5.9.1.4.5 |