| Scalar Object |
| sfpsInPortConfigEntry | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1 |
Each entry specifies the SFPS configuration for the SFPS
inbound switch port for which the entry exists. |
| sfpsOutPortConfigEntry | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1 |
Each entry specifies the SFPS configuration for the SFPS
outbound switch port for which the entry exists. |
| sfpsInPortStatsEntry | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1 |
Specifies the SFPS packet and byte counters for the
inbound SFPS switch port for which this entry exists. |
| sfpsOutPortStatsEntry | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1 |
Specifies the SFPS packet and byte counters for the
outbound SFPS switch port for which this entry exists. |
| sfpsPortAttributePort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.1 |
| sfpsPortAttributeAttributes | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.2 |
| sfpsPortAttributeLearnSelfArp | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.1.3 |
| sfpsPortAttributeAPIVerb | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.1 |
| sfpsPortAttributeAPIPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.2 |
| sfpsPortAttributeAPIAttribute | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.9.2.3 |
| Tabular Object |
| sfpsInPortConfigPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.1 |
The primary index to the SFPS in port table. This identifies
the inbound SFPS switch port for which the entry exists. |
| sfpsInPortConfigAdminStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.2 |
Sets the administrative state of the SFPS inbound switch port
for which the entry exists. |
| sfpsInPortConfigOperStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.3 |
Indicates the current operating condition of the SFPS
on the inbound switch port for which this entry exists. |
| sfpsInPortConfigOperTime | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.4 |
Indicates the elapsed time, in hundredths of a second,
that sfpsInPortOperStatus has been in its current
operational state on the SFPS inbound switch port for which
this entry exists. |
| sfpsInPortConfigType | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.5 |
Sets the type of port access attribute for the inbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk ports with no access
control; host management port indicates the (virtual) port
to which the (internal) management agent is attached; host
control port indicates the port to redirect non-management
packets. |
| sfpsInPortConfigReservedBW | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.6 |
Sets the amount of Bandwidth that is reserved for the inbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused. |
| sfpsInPortConfigAllocBW | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.7 |
Sets the amount of Bandwidth that is allocated for
the inbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth. |
| sfpsInPortConfigQoS | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.8 |
Sets the desired QoS service class for the inbound
SFPS port for which this entry exists. |
| sfpsInPortConfigQSize | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.9 |
Indicates the maximum inbound queue size for this port.
Size is indicated in packets (packet descriptors). |
| sfpsInPortConfigQLen | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.10 |
Indicates the actual inbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue. |
| sfpsInPortConfigSwitchId | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.11 |
This entry is the id of the port. |
| sfpsInPortConfigMediaType | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.12 |
| sfpsInPortConfigFrontPanelPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.13 |
This represents the front panel physical port number |
| sfpsInPortConfigLinkStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.14 |
The link status of this port. |
| sfpsInPortConfigLinkStateAge | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.15 |
Number of time ticks that link has been in this state. |
| sfpsInPortConfigRouterPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.16 |
Specifies whether this port is a router port. |
| sfpsInPortConfigSlotNumber | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.17 |
Slot number in the chassis. |
| sfpsInPortConfigMib2PortId | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.18 |
Mib2 Port id |
| sfpsInPortConfigTopoAgent | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.19 |
Topology Agent |
| sfpsInPortConfigLayer3Learning | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1.1.22 |
Topology Agent |
| sfpsOutPortConfigPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.1 |
The primary index to the SFPS in port table. This identifies
the outbound SFPS switch port for which the entry exists. |
| sfpsOutPortConfigAdminStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.2 |
Sets the administrative state of the SFPS outbound switch port
for which the entry exists. |
| sfpsOutPortConfigOperStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.3 |
Indicates the current operating condition of the SFPS
on the outbound switch port for which this entry exists. |
| sfpsOutPortConfigOperTime | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.4 |
Indicates the elapsed time, in hundredths of a second,
that sfpsOutPortOperStatus has been in its current
operational state on the SFPS outbound switch port for which
this entry exists. |
| sfpsOutPortConfigType | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.5 |
Sets the type of port access attribute for the outbound SFPS
port for which the entry exists. Access ports allow single
user or shared access and perform statisics and control;
network ports are equivalent to trunk ports with no access
control; host management port indicates the (virtual) port
to which the (internal) management agent is attached; host
control port indicates the port to redirect non-management
packets. |
| sfpsOutPortConfigReservedBW | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.6 |
Sets the amount of Bandwidth that is reserved for the outbound
SFPS port for which this entry exists. This bandwidth is
set aside for this port and may be given to another port if
unused. |
| sfpsOutPortConfigAllocBW | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.7 |
Sets the amount of Bandwidth that is allocated for
the outbound SFPS port for which this entry exists.
This bandwidth may be less than the reserved
bandwidth. |
| sfpsOutPortConfigQoS | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.8 |
Sets the desired QoS service class for the outbound
SFPS port for which this entry exists. |
| sfpsOutPortConfigQSize | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.9 |
Indicates the maximum outbound queue size for this port.
Size is indicated in packets (packet descriptors). |
| sfpsOutPortConfigQLen | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.10 |
Indicates the actual outbound queue size for this port.
Size is indicated in packets (packet descriptors). This
is a transient value that reflects the current depth of
queue. |
| sfpsOutPortConfigSwitchId | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.11 |
This entry is id of the port. |
| sfpsOutPortConfigMediaType | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.12 |
| sfpsOutPortConfigFrontPanelPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.13 |
| sfpsOutPortConfigLinkStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.14 |
The link status of this port. |
| sfpsOutPortConfigLinkStateAge | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.15 |
Number of time ticks that link has been in this state. |
| sfpsOutPortConfigRouterPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.16 |
Specifies whether this port is a router port. |
| sfpsOutPortConfigSlotNumber | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.17 |
Slot number in the chassis. |
| sfpsOutPortConfigMib2PortId | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2.1.18 |
Mib2 Port id |
| sfpsInPortStatsPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.1 |
The primary index to the SFPS port table. This identifies
the SFPS inbound switch port for which the entry exists. |
| sfpsInPortStatsAdminStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.2 |
Sets the administrative state of the SFPS packet and byte
counters on the inbound SFPS switch port for which this entry
exists. |
| sfpsInPortStatsReset | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.3 |
Resets the SFPS packet and byte counters on the inbound SFPS
switch port for which this entry exists. |
| sfpsInPortStatsOperTime | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.4 |
Indicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the inbound SFPS switch port for which this entry
exists. |
| sfpsInPortStatsPkts | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.5 |
Indicates the total number of SFPS packets that have been
received, during sfpsInPortStatsOpertime, on the inbound
SFPS switch port for which this entry exists. |
| sfpsInPortStatsDiscardPkts | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.6 |
Indicates the total number of SFPS packets that have been
discarded (dropped), during sfpsInPortStatsOpertime, on the
inbound SFPS switch port for which this entry exists |
| sfpsInPortStatsBytes | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.7 |
Indicates the total number of SFPS bytes that have been
received, during sfpsInPortStatsOperTime, on the inbound
SFPS switch port for which the entry exists. |
| sfpsInPortStatsDiscardBytes | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.8 |
Indicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsInPortStatsOperTime, on the inbound SFPS switch port for
which the entry exists. |
| sfpsInPortStatsQOverflows | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.9 |
Indicates the total number of queue overflow conditions
have been experienced for the inbound SFPS switch port
for which the entry exists. |
| sfpsInPortStatsLinkUps | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.10 |
The number of link ups that this port has seen. |
| sfpsInPortStatsLinkDowns | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1.1.11 |
The number of link downs that this port has seen. |
| sfpsOutPortStatsPort | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.1 |
The primary index to the SFPS port table. This identifies
the SFPS outbound switch port for which the entry exists. |
| sfpsOutPortStatsAdminStatus | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.2 |
Sets the administrative state of the SFPS packet and byte
counters on the outbound SFPS switch port for which this entry
exists. |
| sfpsOutPortStatsReset | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.3 |
Resets the SFPS packet and byte counters on the outbound SFPS
switch port for which this entry exists. |
| sfpsOutPortStatsOperTime | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.4 |
Indicates the amount of time (# of time ticks) that the
port-specific SFPS packet and byte counters have been
active on the outbound SFPS switch port for which this entry
exists. |
| sfpsOutPortStatsPkts | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.5 |
Indicates the total number of SFPS packets that have been
received, during sfpsOutPortStatsOpertime, on the outbound
SFPS switch port for which this entry exists. |
| sfpsOutPortStatsDiscardPkts | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.6 |
Indicates the total number of SFPS packets that have been
discarded (dropped), during sfpsOutPortStatsOpertime, on the
outbound SFPS switch port for which this entry exists |
| sfpsOutPortStatsBytes | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.7 |
Indicates the total number of SFPS bytes that have been
received, during sfpsOutPortStatsOperTime, on the outbound
SFPS switch port for which the entry exists. |
| sfpsOutPortStatsDiscardBytes | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.8 |
Indicates the total number of bytes in the SFPS packets
that have been discarded (dropped), during
sfpsOutPortStatsOperTime, on the outbound SFPS switch port for
which the entry exists. |
| sfpsOutPortStatsQOverflows | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.9 |
Indicates the total number of queue overflow conditions
have been experienced for the outbound SFPS switch port
for which the entry exists. |
| sfpsOutPortStatsLinkUps | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.10 |
The number of link ups that this port has seen. |
| sfpsOutPortStatsLinkDowns | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2.1.11 |
The number of link downs that this port has seen. |
| Table |
| sfpsInPortConfigTable | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.1 |
This table contains the configuration information of each
configured inbound SFPS switch port. If SFPS is not
configured on a port, than an entry will not exist. |
| sfpsOutPortConfigTable | .1.3.6.1.4.1.52.4.2.4.2.1.2.1.2 |
This table contains the configuration information of each
configured outbound SFPS switch port. If SFPS is not
configured on a port, than an entry will not exist. |
| sfpsInPortStatsTable | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.1 |
This table contains the packet and byte counters for each
inbound SFPS switch port. |
| sfpsOutPortStatsTable | .1.3.6.1.4.1.52.4.2.4.2.1.2.2.2 |
This table contains the packet and byte counters for each
outbound SFPS switch port. |