| Scalar Object |
| wanNumConnections | .1.3.6.1.4.1.52.4.1.2.7.1.1.1 |
This objects describes the number of wan connections on the
platform. A wan connection may have one or two physical ports
of which only one can be active at any time. |
| wanConnEntry | .1.3.6.1.4.1.52.4.1.2.7.1.1.2.1 |
A wan connection entry containing objects relating to
the particular wan connection. |
| wanPhysPortEntry | .1.3.6.1.4.1.52.4.1.2.7.1.1.3.1 |
A physical port entry. It contains objects relating to a
given physical port |
| wanInterfaceEntry | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1 |
A wan connection physical port interface entry. It
contains objects relating to an interface that is defined
for this physical port and this wan connection. |
| wanDs1ExtensionsEntry | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1 |
A ds1 extensions entry containing objects relating to
the particular ds1 physical port |
| wanRs232ExtensionsEntry | .1.3.6.1.4.1.52.4.1.2.7.1.3.1.1 |
A rs232-like extensions entry containing objects relating to
the particular rs232-like physical port. |
| frDcpCircuitEntry | .1.3.6.1.4.1.52.4.1.2.7.1.4.1.1 |
The data compression information regarding a single Data
Link Connection Identifier. |
| ddsConfigEntry | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1 |
An Entry in the DDS Configuration Table |
| ds1AlarmGlobalAdmin | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.1 |
Used to enable and disable the DS1 Alarm
Monitoring Application for all DS1 circuits on the
device. |
| ds1AlarmGlobalAutoRecovery | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.2 |
Used to enable and disable the DS1 Alarm
Automatic Recovery feature for all DS1 circuits on
the device. For those devices that support ds1
alarm monitoring, but do not support the automatic
recovery feature, this object always returns disabled,
and performs no action when written. |
| ds1AlarmGlobalTrapEnable | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.3 |
Used to enable and disable the DS1 Alarm
SNMP Trap generation feature for all DS1 circuits on
the device. This object operates in conjunction with
configuration of objects in the ctron-trap-mib.txt |
| ds1AlarmGlobalESCount | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.4 |
Used in conjuction with ctDs1AlarmESInterval to set
the threshold for alarm generation when the number of
Errored Seconds for a specified time interval,
measured in minutes, is exceeded. The default
Errored Seconds alarm condition is 100 errored seconds
over a 6 minute time interval. |
| ds1AlarmGlobalESInterval | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.5 |
Used in conjuction with ds1AlarmGlobalESCount to
set the threshold for alarm generation when the number
of Errored Seconds for a specified time interval,
measured in minutes, is exceeded. The default
Errored Seconds alarm condition is 100 errored seconds
over a 6 minute time interval. |
| ds1AlarmGlobalBPVErrorRate | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.6 |
Used to specify the negative exponent of 10, used in
monitoring Bipolar Violations (Code Violations for E1)
over intervals defined by ds1AlarmGlobalBPVInterval.
For example, for a ds1AlarmGlobalBPVErrorRate value
of 6 used with a ds1AlarmGlobalBPVInterval of 15,
an alarm is generated when a 15 minute period has an
average error rate which exceeds 1 Bipolar Violation
(Code Violation for E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written. |
| ds1AlarmGlobalBPVInterval | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.7 |
Used to specify the interval, used in monitoring
Bipolar Violations (Code Violations for E1)
with thresholds defined by ds1AlarmGlobalBPVErrorRate.
For example, for a ds1AlarmGlobalBPVErrorRate value
of 6 used with a ds1AlarmGlobalBPVInterval of 15, an
alarm is generated when a 15 minute period has an
average error rate which exceeds 1 Bipolar Violation
(Code Violation for E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not detect bipolar
violations, this object always returns the default,
and performs no action when written. |
| ds1AlarmGlobalManualRecovery | .1.3.6.1.4.1.52.4.1.2.7.1.6.1.8 |
To cause a manual recovery to occur on all Ds1 circuits, this
object is set to a 1. It is always read as a 1. The recovery
will occur only when automatic recovery is disabled. |
| ds1AlarmConfigEntry | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1 |
A description of a single entry. |
| ipPQAdmin | .1.3.6.1.4.1.52.4.1.2.7.1.7.1.1 |
Used to enable and disable the IP Priority Queue
Forwarding Application. |
| iPPQMaxEntries | .1.3.6.1.4.1.52.4.1.2.7.1.7.1.2 |
Returns the maximum number of IP address entries
supported by the IP Priority Queue application on
this device. |
| iPPQNumEntries | .1.3.6.1.4.1.52.4.1.2.7.1.7.1.3 |
Get the number of IP address entries currently
programmed in the ipPQAddressTable. |
| iPPQAddAddress | .1.3.6.1.4.1.52.4.1.2.7.1.7.1.4 |
Add an IP address to the ipPQAddressTable. Always
read as a 0.0.0.0. |
| iPPQDelAddress | .1.3.6.1.4.1.52.4.1.2.7.1.7.1.5 |
Delete an IP address from the ipPQAddressTable.
Always read as a 0.0.0.0. |
| ipPQAddressEntry | .1.3.6.1.4.1.52.4.1.2.7.1.7.2.1 |
A description of a single entry. |
| ctWanHDSLPerformance15mEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1 |
Entries in the 15 minute performance table |
| ctWanHDSLPerformance24hEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1 |
Entries in the 24-hour ctWanHDSLPerformance table |
| ctWanHDSLStatisticsEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1 |
Entries of the HDSL statistics table |
| ctWanHDSLTestEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.4.1 |
Entries of the HDSL test results table. |
| ctWanHDSLAlarmsEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.5.1 |
Entries for the ctWanHDSL alarms information |
| ctWanHDSLAlarmHistoryEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1 |
Entries in the Alarm History table |
| ctWanHDSLLoopbacksEntry | .1.3.6.1.4.1.52.4.1.2.7.1.8.7.1 |
Entries in the HDSL Loopback table. |
| Tabular Object |
| wanConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.1 |
A unique value for each wan connection. Its value ranges
between 1 and the value wanNumConnections. |
| wanConnNumPhysPorts | .1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.2 |
The number of physical ports that exist on this wan
connection. |
| wanConnDefaultPhysPort | .1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.3 |
The default physical port for this connection. This
indicates the physical port that should be used on this wan
connection. If redundancy is not enabled, this physical port
will always be used. If redundancy is enabled, the physical
port given here will be considered the primary physical port.
The value of this object must be set to the index of a
valid physical port (wanPhysPortIndex) for this wan connection. |
| wanConnActivePhysPort | .1.3.6.1.4.1.52.4.1.2.7.1.1.2.1.4 |
The physical port that is currently active for this wan
connection. The value of this object indicates the
wanPhysPortIndex for the active port. |
| wanPhysPortConnectionIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.1 |
A value indicating the wan connection this physical port
is located on. |
| wanPhysPortIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.2 |
A unique value for each physical port on a wan connection.
Its value ranges between 1 and the value wanConnNumPhysPorts. |
| wanPhysPortType | .1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.3 |
The type of physical port that this entry describes. None
indicates that the physical port has no connector. |
| wanPhysPortSpecificMib | .1.3.6.1.4.1.52.4.1.2.7.1.1.3.1.4 |
This object identifies an instance of the index object in
the first group of objects in the MIB specific to the
physical port. |
| wanInterfaceConnectionIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.1 |
This value is the wan connection that this interface
exists on. |
| wanInterfacePhysPortIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.2 |
This value is the physical port of the wan connection
that this interface exists on. |
| wanInterfaceEntryIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.3 |
A unique value for each interface of this physical port.
It is a value between 1 and the number of interfaces that
exist for the current port. The number of interfaces for
each type of port is: 24 for a port type (wanPhysPortType)
of 't1', 30 for a port type of 'e1', and 1 for a port type
of 'synchronous'. There will be no entries if the port type
is 'none'. |
| wanInterfaceEntryIfIndex | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.4 |
The ifIndex of the interface. This is the index of this entry
in the ifTable. |
| wanInterfaceEntryProtocol | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.5 |
The protocol that should be run on this interface. Values
are equivalent to those defined for ifType in Mib-II.
Accepted values are product dependent. |
| wanInterfaceEntryCompression | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.6 |
Indicates whether data compression should take
place on this interface. |
| wanInterfaceEntryMTU | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.7 |
The MTU to be negotiated for this interface. This will not
be updated with the actual MTU, which can be found in the
ifTable. |
| wanInterfaceEntryLineCoding | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.8 |
This object describes the variety of Zero Code suppression
on this interface. For an interface on a Ds1 Port, the valid
values depend on the value of the Ds1ConfigLineCode object.
If that object is set to ds1xB8ZS, then this object can be
set to none, JBZS, or InvHDLC. If the value of
Ds1ConfigLineCode is set to ds1xAMI, then this object can
only be set to JBZS, or InvHDLC. For an interface on a
Synchronous Port, the valid values are none or InvHDLC.
JBZS refers to Jammed Bit Zero suppression, which forces a
1 bit every 8 bit periods. InvHDLC refers to inverting
the HDLC data for the interface. None refers to a mode
in which some other means, such as with the Ds1ConfigLineCode
object set to dsx1B8ZS, is used to insure pulse density
requirements. |
| wanInterfaceEntryCrcLength | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.9 |
The Length of the CRC for this interface. Not all platforms
will allow all options. |
| wanInterfaceEntryLexProtocolEnable | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.10 |
This switch acts in concert with the wanInterfaceEntryProtocol
object. To activate LEX, this object should first be set to
enable (1), then set the wanInterfaceEntryProtocol to PPP. The
enable will have no effect if PPP is not selected. If the
wanInterfaceEntryProtocol is selected first, the default NCP of
BNCP will be selected. To De-select LEX, you must set this
object to disable (2), and wanInterfaceEntryProtocol to NONE or
reset the device. Just selecting disable (2) will not tear down
the connection. |
| wanInterfaceEntryLexProtocolStatus | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.11 |
This object reflects the current state of the link. The device
is said to be bound to the router when the physical link is OK,
the LEX negotiation is successful, and the router has been
configured correctly to communicate with this particular LAN
Extender. |
| wanInterfaceEntryCompRatio | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.12 |
The ratio of uncompressed to compressed transmitted data.
If the data compression status is off, 1:1 will be displayed |
| wanInterfaceEntryCompStatus | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.13 |
On indicates that the compression has been successfully
negotiated and is operating. Off indicates that the
compression negotiation has failed and compression is not
operating at this time, or compression has been terminated
by either peer. |
| wanInterfaceEntryBackUpIfEnable | .1.3.6.1.4.1.52.4.1.2.7.1.1.4.1.14 |
This object is used to select the Call-backup option.
A value of 1 is used to enable the option and a value of
2 to disable it. |
| wanDs1ExtensionsEntryIndex | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.1 |
A unique value for each ds1 physical port on the platform. |
| wanDs1ExtensionsNumInterfaces | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.2 |
The number of interfaces on this physical port. This
number indicates the number of entries this physical port
uses in the ifTable. |
| wanDs1ExtensionsToggleFracTable | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.3 |
Setting this object to 1 will cause the Ds1 Fractional Table
to be updated with the new values, as entered.
Setting this object to 2, will cause the Ds1 Fractional Table
to view as the table being entered.
Setting this object to 3, will cause the Ds1 Fractional Table
to be the table that is currently in use, regardless of
any changes being entered.
Setting this object to 4, will cause any changes that have
been made to the Ds1 Fractional Table since the last
update-table to be deleted.
For physical ports of type synchronous, this object will
have no affect, and will always return a 1. |
| wanDs1ExtensionsLineBuildOut | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.4 |
The line build out setting for this ds1 physical port.
Unknown indicates that the setting is neither readable or
writable. |
| wanDs1ExtensionsCFADuration | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.5 |
The length of time (in seconds), that the ds1 port will
remain in the Carrier Failure Alarm state after the
alarm condition has cleared. |
| wanDs1ExtensionsDIEnable | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.6 |
Enables or disables Drop and Insert functionality on a
D/I WPIM. If enabled, all zero assigned timeslots will
designate D/I interface channels, if disabled all zero
channels will designate dummy channels as on a T1 or E1.
If this object is set to diDataEnabled the zero channels
will designate D/I interface channels and data to and
from the device will be transmitted or received on the
D/I port instead of the N/I port. |
| wanDs1ExtensionsTotalValidIntervals | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.7 |
The number of previous intervals for which
valid data was collected for the DS1 mib, which
is currently RFC1406. This counter is similar to
RFC1406 dsx1ValidIntervals except that the count
represents the total number of complete 15 minute
intervals since the ds1 interface has been online,
and does not stop at the 24 hour period. |
| wanDs1ExtensionsBertTestMode | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.8 |
This object is used to request that a type of
process be in control of the testing function.
This is used to differentiate between automated test
procedures and those manually controlled by a user.
When read, this object reflects which type of process
is actually in control of the testing function. The
implementation is free to prioritize or deny requests
in a proprietary manner. |
| wanDs1ExtensionsBertRun | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.9 |
Controls the sending of test data over this physical
port. The data is a pattern described by
wanDs1ExtensionsBertTestPattern. |
| wanDs1ExtensionsBertCurrentResults | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.10 |
Indicates the results of the testing for the
last completed sampling period. A non-negative
number is the error rate in bits per million bits. |
| wanDs1ExtensionsBertCumulativeResults | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.11 |
Indicates the total number of errors since the
testing was enabled. It is not a rate. |
| wanDs1ExtensionsBertPeakResults | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.12 |
Indicates the highest value of
wanDs1ExtensionsBertCurrentResults since the testing
was enabled. A non-negative number is the error rate
in bits per million bits. |
| wanDs1ExtensionsBertAverageResult | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.13 |
Indicates the average value of
wanDs1ExtensionsBertCurrentResults since the testing
was enabled. A non-negative number is the error rate
in bits per million bits. |
| wanDs1ExtensionsBertTestPattern | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.14 |
This object is used to specify the pattern of the
test data. |
| wanDs1ExtensionsBertSamplePeriod | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.15 |
This object is the duration of time in seconds at
which the current test results will be periodically
written to wanDs1ExtensionsBertCurrentResults. The
range is 1 to 3600, with a default value of 10. |
| wanDs1ExtensionsBertNumPeriods | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.16 |
The number of sampling periods that have elapsed
during the current test run. |
| wanDs1ExtensionsBertTestTraps | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.17 |
This object is used to enable or disable the sending
of a trap at the conclusion of the measurement period.
The trap will contain the information described by
ctDs1BertCurrentResults. The default value is disabled. |
| wanDs1ExtensionsBertDataStatus | .1.3.6.1.4.1.52.4.1.2.7.1.2.1.1.18 |
This object provides the operating status of the
transmission of test data packets. |
| wanRs232ExtensionsEntryIndex | .1.3.6.1.4.1.52.4.1.2.7.1.3.1.1.1 |
A unique value for each rs232-like physical port on
the platform. |
| wanRs232ExtensionsCTSEnable | .1.3.6.1.4.1.52.4.1.2.7.1.3.1.1.2 |
This object indicates whether the platform should generate
CTS. When disabled the platform will not generate CTS, when
enabled, the platform will generate CTS. The actual state
of the CTS line is available in the rs-232 like mib. |
| wanRs232ExtensionsDSREnable | .1.3.6.1.4.1.52.4.1.2.7.1.3.1.1.3 |
This object indicates whether the platform should generate
DSR. When disabled the platform will not generate DSR, when
enabled, the platform will generate DSR. The actual state
of the DSR line is available in the rs-232 like mib. |
| frDcpCircuitIfIndex | .1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.1 |
The ifIndex value of ifEntry that this DCP virtual circuit
object is layered onto. |
| frDcpCircuitDlci | .1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.2 |
The Data Link Connection Identifier for this DCP virtual
circuit object. |
| frDcpCircuitEnable | .1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.3 |
Indicates whether data compression should take place on
this particular end side virtual circuit. |
| frDcpCircuitStatus | .1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.4 |
On indicates that the compression has been successfully
negotiated and is operating. Off indicates that the
compression negotiation has failed and compression is not
operating at this time, or compression has been terminated
by either peer. |
| frDcpCircuitRatio | .1.3.6.1.4.1.52.4.1.2.7.1.4.1.1.5 |
The ratio of uncompressed to compressed transmitted data.
If the data compression status is off, 1:1 will be displayed |
| ddsLineIndex | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.1 |
A unique value for each dds physical port on the
platform |
| ddsIfIndex | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.2 |
Index associated with this dds physical port |
| ddsLineMode | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.3 |
DDS-PRI is full duplex 56k link, No framing in loop
data so loop speed is also 56k. Data stream:
--d1 d2 d3 d4 d5 d6 d7--
DDS-CC is full duplex 64k link. Does not require framing
bit but uses a same format as SC, ninth bit position is
lumped with primary channel and not used for control.
Loop speed is 72k, Primary channel rate is 64k.
--d1 d2 d3 d4 d5 d6 d7 F d8-- |
| ddsLineCoding | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.4 |
This object describes the variety of Zero Code
suppression on this interface. JBZS refers to Jammed
Bit Zero suppression, which forces a 1 bit every 8 bit
periods. None refers to a mode in which some other
means is used to insure pulse density requirements. |
| ddsLoopbackConfig | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.5 |
This variable represents the loop-back configuration
of the DDS interface. ddsNoLoop means the interface is
not in loop-back state, and LineLoop means the the
received data is looped back out. |
| ddsLineStatus | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.6 |
This describes the current operational
status of DDS line. |
| ddsTxClockSource | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.7 |
The source of Transmit clock.
ddsLoopTiming - indicates that the recovered receive
clock is used as transmit clock.
ddsLocalTiming - indicates that a local clock source is
used. |
| ddsPortInSpeed | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.8 |
This variable describes the current operational
receive speed of DDS line. It is a read only value
based entirely on DDS type (CC or PRI). |
| ddsPortOutSpeed | .1.3.6.1.4.1.52.4.1.2.7.1.5.1.1.9 |
This variable describes the current operational
transmit speed of DDS line. It is a read only value
based entirely on DDS type CC or PRI |
| ds1PhysNum | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.1 |
The value for this object is equal to the value
of a unique physical connection identifier associated
with this DS1 which is clearly labeled on the device.
For those products that do not have a DS1 identifier
labeled on the device, the value for this object is
the same as rfc1406 dsx1LineIndex. |
| ds1AlarmAdmin | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.2 |
Used to enable and disable the DS1 Alarm
Monitoring Application for this DS1 circuit. |
| ds1AlarmAutoRecovery | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.3 |
Used to enable and disable the DS1 Alarm
Automatic Recovery feature for this DS1 circuit.
For those devices that support ds1
alarm monitoring, but do not support the automatic
recovery feature, this object always returns disabled,
and performs no action when written. |
| ds1AlarmTrapEnable | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.4 |
Used to enable and disable the DS1 Alarm
SNMP Trap generation feature for this DS1 circuit.
This object operates in conjunction with configuration
of objects in the ctron-trap-mib.txt |
| ds1AlarmESCount | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.5 |
Used in conjuction with ctDs1AlarmESInterval to set
the threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is exceeded. The default Errored Seconds
alarm condition is 100 errored seconds over a 6 minute
time interval. |
| ds1AlarmESInterval | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.6 |
Used in conjuction with ctDs1AlarmESCount to set the
threshold for alarm generation when the number of
Errored Seconds for a specified time interval, measured
in minutes, is exceeded. The default Errored Seconds
alarm condition is 100 errored seconds over a 6 minute
time interval. |
| ds1AlarmBPVErrorRate | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.7 |
Used to specify the negative exponent of 10, used in
monitoring Bipolar Violations (Code Violations for E1)
over intervals defined by ds1AlarmBPVInterval. For
example, for a ds1AlarmBPVErrorRate value of 6 used
with a ds1AlarmBPVInterval of 15, an alarm is generated
when a 15 minute period has an average error rate which
exceeds 1 Bipolar Violation (Code Violation for E1) per
million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written. |
| ds1AlarmBPVInterval | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.8 |
Used to specify the interval, used in
monitoring Bipolar Violations (Code Violations for E1)
with thresholds defined by ds1AlarmBPVErrorRate. For
example, for a ds1AlarmBPVErrorRate value of 6 used
with a ds1AlarmBPVInterval of 15, an alarm is generated
when a 15 minute period has an average error rate
which exceeds 1 Bipolar Violation (Code Violation for
E1) per million bits.
For those devices that support ds1 alarm monitoring
but who's hardware does not support detect bipolar
violations, this object always returns the default,
and performs no action when written. |
| ds1AlarmManualRecovery | .1.3.6.1.4.1.52.4.1.2.7.1.6.2.1.9 |
To cause a manual recovery to occur, this object is set
to a 1. It is always read as a 1. The recovery will
occur only when automatic recovery is disabled. |
| ipPQAddressId | .1.3.6.1.4.1.52.4.1.2.7.1.7.2.1.1 |
A unique value identifying an element in a sequence
of IP PQ address entries. |
| ipPQIPAddress | .1.3.6.1.4.1.52.4.1.2.7.1.7.2.1.2 |
Returns an IP address associated with a specific
entry in this table. |
| ctWanHDSLPerformance15mConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.1 |
Identify the HDSL connection within the device, indexing from
1 to the maximum allowed number of HDSL connections in the
device. |
| ctWanHDSLPerformance15mSlotIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.2 |
Define which 15-minute slot history of the HDSL within the
24 hour period. Indexing from 1 - 97 with the first index
representing the current 15-minute history |
| ctWanHDSLHLULoop1UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.3 |
Unavailable seconds (UAS) on LOOP 1 of the local line unit during
the 15-minute period. |
| ctWanHDSLHLULoop1ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.4 |
Errored seconds (ES) on LOOP 1 of the local line unit during
the 15-minute period. |
| ctWanHDSLHLULoop2UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.5 |
Unavailable seconds (UAS) on LOOP 2 of the local line unit during
the 15-minute period. |
| ctWanHDSLHLULoop2ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.6 |
Errored seconds (ES) on LOOP 2 of the local line unit during
the 15-minute period. |
| ctWanHDSLHRULoop1UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.7 |
Unavailable seconds (UAS) on LOOP 1 of the remote line unit during
the 15-minute period. |
| ctWanHDSLHRULoop1ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.8 |
Errored seconds (ES) on LOOP 1 of the remote line unit during
the 15-minute period. |
| ctWanHDSLHRULoop2UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.9 |
Unavailable seconds (UAS) on LOOP 2 of the remote line unit during
the 15-minute period. |
| ctWanHDSLHRULoop2ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.10 |
Errored seconds (ES) on LOOP 2 of the remote line unit during
the 15-minute period. |
| ctWanHDSLDb1NetworkLoop1UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.11 |
Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb1NetworkLoop1ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.12 |
Errored seconds (ES) on LOOP 1 of the first doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb1NetworkLoop2UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.13 |
Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb1NetworkLoop2ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.14 |
Errored seconds (ES) on LOOP 2 of the first doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb1CustomerLoop1UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.15 |
Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb1CustomerLoop1ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.16 |
Errored seconds (ES) on LOOP 1 of the first doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb1CustomerLoop2UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.17 |
Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb1CustomerLoop2ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.18 |
Errored seconds (ES) on LOOP 2 of the first doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb2NetworkLoop1UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.19 |
Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb2NetworkLoop1ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.20 |
Errored seconds (ES) on LOOP 2 of the second doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb2NetworkLoop2UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.21 |
Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb2NetworkLoop2ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.22 |
Errored seconds (ES) on LOOP 2 of the second doubler unit's
network side during the 15-minute period. |
| ctWanHDSLDb2CustomerLoop1UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.23 |
Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb2CustomerLoop1ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.24 |
Errored seconds (ES) on LOOP 1 of the second doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb2CustomerLoop2UAS15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.25 |
Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLDb2CustomerLoop2ES15m | .1.3.6.1.4.1.52.4.1.2.7.1.8.1.1.26 |
Errored seconds (ES) on LOOP 2 of the second doubler unit's
customer side during the 15-minute period. |
| ctWanHDSLPerformance24hConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.1 |
Identify the HDSL connection within the device, indexing from
1 to the maximum allowed number of HDSL connections in the
device. |
| ctWanHDSLPerformance24hSlotIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.2 |
Define which 24-hour slot history of the HDSL within the
last 7 days period. Indexing from 1 - 8 with the first index
representing the current 24 hour history |
| ctWanHDSLHLULoop1UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.3 |
Unavailable seconds (UAS) on LOOP 1 of the local line unit during
the 24-hour period. |
| ctWanHDSLHLULoop1ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.4 |
Errored seconds (ES) on LOOP 1 of the local line unit during
the 24-hour period. |
| ctWanHDSLHLULoop2UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.5 |
Unavailable seconds (UAS) on LOOP 2 of the local line unit during
the 24-hour period. |
| ctWanHDSLHLULoop2ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.6 |
Errored seconds (ES) on LOOP 2 of the local line unit during
the 24-hour period. |
| ctWanHDSLHRULoop1UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.7 |
Unavailable seconds (UAS) on LOOP 1 of the remote line unit during
the 24-hour period. |
| ctWanHDSLHRULoop1ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.8 |
Errored seconds (ES) on LOOP 1 of the remote line unit during
the 24-hour period. |
| ctWanHDSLHRULoop2UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.9 |
Unavailable seconds (UAS) on LOOP 2 of the remote line unit during
the 24-hour period. |
| ctWanHDSLHRULoop2ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.10 |
Errored seconds (ES) on LOOP 2 of the remote line unit during
the 24-hour period. |
| ctWanHDSLDb1NetworkLoop1UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.11 |
Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb1NetworkLoop1ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.12 |
Errored seconds (ES) on LOOP 1 of the first doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb1NetworkLoop2UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.13 |
Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb1NetworkLoop2ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.14 |
Errored seconds (ES) on LOOP 2 of the first doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb1CustomerLoop1UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.15 |
Unavailable seconds (UAS) on LOOP 1 of the first doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb1CustomerLoop1ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.16 |
Errored seconds (ES) on LOOP 1 of the first doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb1CustomerLoop2UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.17 |
Unavailable seconds (UAS) on LOOP 2 of the first doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb1CustomerLoop2ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.18 |
Errored seconds (ES) on LOOP 2 of the first doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb2NetworkLoop1UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.19 |
Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb2NetworkLoop1ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.20 |
Errored seconds (ES) on LOOP 1 of the second doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb2NetworkLoop2UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.21 |
Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb2NetworkLoop2ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.22 |
Errored seconds (ES) on LOOP 2 of the second doubler unit's
network side during the 24-hour period. |
| ctWanHDSLDb2CustomerLoop1UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.23 |
Unavailable seconds (UAS) on LOOP 1 of the second doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb2CustomerLoop1ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.24 |
Errored seconds (ES) on LOOP 1 of the second doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb2CustomerLoop2UAS24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.25 |
Unavailable seconds (UAS) on LOOP 2 of the second doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLDb2CustomerLoop2ES24h | .1.3.6.1.4.1.52.4.1.2.7.1.8.2.1.26 |
Errored seconds (ES) on LOOP 2 of the second doubler unit's
customer side during the 24-hour period. |
| ctWanHDSLStatisticsHLUConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.1 |
Identify the HDSL connection occupied in the device,
indexing from 1 to the maximum allowed connections in
the device. |
| ctWanHDSLSNRHLULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.2 |
Current SNR on LOOP 1 of the local line unit. |
| ctWanHDSLSNRLowHLULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.3 |
Lowest SNR on LOOP 1 of the local line unit. |
| ctWanHDSLSNRHighHLULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.4 |
Highest SNR on LOOP 1 of the local line unit. |
| ctWanHDSLSNRHLULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.5 |
Current SNR on LOOP 2 of the local line unit. |
| ctWanHDSLSNRLowHLULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.6 |
Lowest SNR on LOOP 2 of the local line unit. |
| ctWanHDSLSNRHighHLULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.7 |
Highest SNR on LOOP 2 of the local line unit. |
| ctWanHDSLPulseAttenuationHLULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.8 |
pulse Attenuation on LOOP 1 of the local line unit. |
| ctWanHDSLPulseAttenuationHLULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.9 |
pulse Attenuation on LOOP 2 of the local line unit. |
| ctWanHDSLBitStat1HLU | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.10 |
A byte value which contains product specific information:
bit 0 - System in AIS on the local line unit.
1 - System in AIS on the remote line unit.
2 - Channels are reversed on the remote line unit.
3 - Channels are reversed on the doubler 1.
4 - Channels are reversed on the doubler 2.
5 - Power is fed to the next unit on the local line unit.
6 - Power is fed to the next unit on the remote line unit.
7 - Smartloop is active on remote line unit. (HiGain only) |
| ctWanHDSLSNRHRULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.11 |
Current SNR on LOOP 1 of the remote line unit. |
| ctWanHDSLSNRLowHRULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.12 |
Lowest SNR on LOOP 1 of the remote line unit. |
| ctWanHDSLSNRHighHRULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.13 |
Highest SNR on LOOP 1 of the remote line unit. |
| ctWanHDSLSNRHRULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.14 |
Current SNR on LOOP 2 of the remote line unit. |
| ctWanHDSLSNRLowHRULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.15 |
Lowest SNR on LOOP 2 of the remote line unit. |
| ctWanHDSLSNRHighHRULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.16 |
Highest SNR on LOOP 2 of the remote line unit. |
| ctWanHDSLPulseAttenuationHRULoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.17 |
pulse Attenuation on LOOP 1 of the remote line unit. |
| ctWanHDSLPulseAttenuationHRULoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.18 |
pulse Attenuation on LOOP 2 of the remote line unit. |
| ctWanHDSLDs1FrameHRU | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.19 |
Byte value shows DS1 frame and code information for the remote
line unit (HiGain only):
bit 0:1 -
0 - frame format is SF.
1 - frame format is ESF.
2 - Frame format is unframed.
3 - no activity.
bit 2:3 -
reserved.
bit 4 -
0 - line code is AMI
1 - line code is B8ZS.
bit 5:7 -
reserved. |
| ctWanHDSLSNRDb1NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.20 |
Current SNR on LOOP 1 of doubler 1's network side |
| ctWanHDSLSNRLowDb1NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.21 |
Lowest SNR on LOOP 1 of doubler 1's network side |
| ctWanHDSLSNRHighDb1NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.22 |
Highest SNR on LOOP 1 of doubler 1's network side |
| ctWanHDSLSNRDb1NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.23 |
Current SNR on LOOP 2 of doubler 1's network side. |
| ctWanHDSLSNRLowDb1NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.24 |
Lowest SNR on LOOP 2 of doubler 1's network side. |
| ctWanHDSLSNRHighDb1NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.25 |
Highest SNR on LOOP 2 of doubler 1's network side. |
| ctWanHDSLSNRDb1CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.26 |
Current SNR on LOOP 1 of doubler 1's customer side. |
| ctWanHDSLSNRLowDb1CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.27 |
Lowest SNR on LOOP 1 of doubler 1's customer side. |
| ctWanHDSLSNRHighDb1CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.28 |
Highest SNR on LOOP 1 of doubler 1's customer side. |
| ctWanHDSLSNRDb1CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.29 |
Current SNR on LOOP 2 of doubler 1's customer side. |
| ctWanHDSLSNRLowDb1CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.30 |
Lowest SNR on LOOP 2 of doubler 1's customer side. |
| ctWanHDSLSNRHighDb1CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.31 |
Highest SNR on LOOP 2 of doubler 1's customer side. |
| ctWanHDSLPulseAttenuationDb1NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.32 |
Pulse Attenuation on LOOP 1 of doubler 1's network side. |
| ctWanHDSLPulseAttenuationDb1NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.33 |
Pulse Attenuation on LOOP 2 of doubler 1's network side. |
| ctWanHDSLPulseAttenuationDb1CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.34 |
Pulse Attenuation on LOOP 1 of doubler 1's customer side. |
| ctWanHDSLPulseAttenuationDb1CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.35 |
pulse Attenuation on LOOP 2 of doubler 1's customer side. |
| ctWanHDSLSNRDb2NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.36 |
Current SNR on LOOP 1 of doubler 2's network side. |
| ctWanHDSLSNRLowDb2NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.37 |
Lowest SNR on LOOP 1 of doubler 2's network side. |
| ctWanHDSLSNRHighDb2NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.38 |
Highest SNR on LOOP 1 of doubler 2's network side. |
| ctWanHDSLSNRDb2NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.39 |
Current SNR on LOOP 2 of doubler 2's network side. |
| ctWanHDSLSNRLowDb2NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.40 |
Lowest SNR on LOOP 2 of doubler 2's network side. |
| ctWanHDSLSNRHighDb2NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.41 |
Highest SNR on LOOP 2 of doubler 2's network side. |
| ctWanHDSLSNRDb2CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.42 |
Current SNR on LOOP 1 of doubler 2's customer side. |
| ctWanHDSLSNRLowDb2CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.43 |
Lowest SNR on LOOP 1 of doubler 2's customer side. |
| ctWanHDSLSNRHighDb2CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.44 |
Highest SNR on LOOP 1 of doubler 2's customer side. |
| ctWanHDSLSNRDb2CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.45 |
Current SNR on LOOP 2 of doubler 2's customer side. |
| ctWanHDSLSNRLowDb2CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.46 |
Lowest SNR on LOOP 2 of doubler 2's customer side. |
| ctWanHDSLSNRHighDb2CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.47 |
Highest SNR on LOOP 2 of doubler 2's customer side. |
| ctWanHDSLPulseAttenuationDb2NetworkLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.48 |
Pulse Attenuation on LOOP 1 of doubler 2's network side |
| ctWanHDSLPulseAttenuationDb2NetworkLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.49 |
Pulse Attenuation on LOOP 2 of doubler 2's network side. |
| ctWanHDSLPulseAttenuationDb2CustomerLoop1 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.50 |
pulse Attenuation on LOOP 1 of doubler 2's customer side. |
| ctWanHDSLPulseAttenuationDb2CustomerLoop2 | .1.3.6.1.4.1.52.4.1.2.7.1.8.3.1.51 |
Pulse Attenuation on LOOP 2 of doubler 2's customer side. |
| ctWanHDSLTestHLUConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.1 |
Identify the slot of the HDSL within the device that the user
wants to conduct the line unit test. Slot number start from
1 to maximum slots available in the device. |
| ctWanHDSLTestMode | .1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.2 |
This object may only be successfully set on a master device.
When this object is set, the local unit's test mode is
defined by these values when set:
1 - Normal operation
3 - Self test mode
4 - PROM check test
5 - External RAM test
6 - DS1 loop test
7 - MUX-DMUX test
9 - Analog loopback mode
13 - Transceiver mode
When getting this object, the value returned represents
the last value this object had been set to. |
| ctWanHDSLHLUTestResult | .1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.3 |
Test result for the local line unit (1 - test failed, 0 - success):
bit 0 - 2180 DS1 frame sync test (HiGain only)
1 - 2180 DS1 data test (HiGain only)
2 - LIU DS1 frame sync test (HiGain only)
3 - LIU DS1 data test (HiGain only)
4 - External DS1 frame sync test (HiGain only)
5 - External DS1 data test.
6 - Mux sync test on HDSL LOOP 1
7 - Mux sync test on HDSL LOOP 2
8 - Reserved.
9 - Mux frame error test on HDSL LOOP 1
10 - Mux frame error test on HDSL LOOP 2
11 - Mux CRC test on HDSL LOOP 1
12 - Mux CRC test on HDSL LOOP 2
13 - Mux DL test on HDSL LOOP 1
14 - Mux DL test on HDSL LOOP 2
15 - Analog loopback test.
16 - Digital loop test.
17 - HGF HDSL loop test (HiGain only)
18 - HGF write/readback test (HiGain only)
19 - HGF poll lock test (HiGain only).
20 - HGF activity monitor test (HiGain only).
21 - HGF zeroes TX and detect test (HiGain only).
22 - HGF ones TX and detect test (HiGain only).
23 - Transceiver poll test on HDSL LOOP 1
24 - Transceiver poll test on HDSL LOOP 2
25 - PROM check test.
26 - External RAM test.
27 - Non-Volatile RAM test.
|
| ctWanHDSLHRUTestResult | .1.3.6.1.4.1.52.4.1.2.7.1.8.4.1.4 |
Test results for the remote line unit,
Bit definitions correspond to those defined for
ctWanHDSLHLUTestResult. |
| ctWanHDSLAlarmsHLUConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.5.1.1 |
Identify which HDSL connection within the device that
the user wants to retrieve the alarm information. |
| ctWanHDSLAlarmsBackplane | .1.3.6.1.4.1.52.4.1.2.7.1.8.5.1.2 |
Specific information that's related to the HDSL alarms, each bit
in the two bytes value has the following meaning if set:
Bit 0 : Local Loss of Signal on DS1 line (HiGain only).
1 : Remote Loss of Signal on DS1 list (HiGain only).
2 - 7 : reserved.
8 : Loss of Sync word on LOOP 1 of the local line unit.
9 : Loss of Sync word on LOOP 2 of the local line unit.
10 : Loss of Sync word on LOOP 1 of the first doubler.
11 : Loss of sync word on LOOP 2 of the first doubler.
12 : Loss of Sync word on LOOP 1 of the second doubler.
13 : Loss of sync word on LOOP 2 of the second doubler. |
| ctWanHDSLAlarmsES | .1.3.6.1.4.1.52.4.1.2.7.1.8.5.1.3 |
A two bytes value for the Errored Second indication of the HDSL
line unit, including local, remote line units and the doublers.
each bit in the two bytes value has the following meaning if set:
Bit 0 : Errored Second on LOOP 1 of local line unit.
1 : Errored Second on LOOP 2 of local line unit.
2 : Errored Second on LOOP 1 of remote line unit.
3 : Errored Second on LOOP 2 of remote line unit.
4 : Errored Second on LOOP 1 of local line unit's network side.
5 : Errored Second on LOOP 2 of local line unit's network side.
6 : Errored Second on LOOP 1 of local line unit's customer side.
7 : Errored Second on LOOP 2 of local line unit's customer side. |
| ctWanHDSLAlarmHistoryConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.1 |
Defines which HDSL connection's alarm history within the
device. |
| ctWanHDSLAlHistLLOSFirst | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.2 |
Time stamp of the first time the DS1 Loss Of Signal (LOS)
occurred on the local side of the HDSL. |
| ctWanHDSLAlHistLLOSLast | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.3 |
Time stamp of the last time the DS1 Loss Of Signal (LOS)
occurred on the local side of the HDSL. |
| ctWanHDSLAlHistLLOSCurrent | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.4 |
Set if the DS1 Loss Of Signal (LOS) still occurred on the
local side of the HDSL. |
| ctWanHDSLAlHistLLOSCount | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.5 |
Number of times the DS1 Loss Of Signal (LOS) occurred since
we last cleared the alarm history on the local side of the HDSL.
(HiGain only) |
| ctWanHDSLAlHistRLOSFirst | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.6 |
Time stamp of the first time the DS1 Loss Of Signal (LOS)
occurred on the remote side of the HDSL. (HiGain only) |
| ctWanHDSLAlHistRLOSLast | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.7 |
Time stamp of the last time the DS1 Loss Of Signal (LOS) occurred
on the remote side of the HDSL. (HiGain only) |
| ctWanHDSLAlHistRLOSCurrent | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.8 |
Set if the DS1 Loss Of Signal (LOS) still occurred on the remote
site of the HDSL. (HiGain only) |
| ctWanHDSLAlHistRLOSCount | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.9 |
Number of times the DS1 Loss Of Signal (LOS) occurred since we
last cleared the alarm history on the remote site of the HDSL.
(HiGain only) |
| ctWanHDSLAlHistLOSW1First | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.10 |
Time stamp of the first time the Loss Of Sync Word (LOSW) occurred
on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistLOSW1Last | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.11 |
Time stamp of the last time the Loss Of Sync Word (LOSW) occurred
on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistLOSW1Current | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.12 |
Set if the Loss Of Sync Word (LOSW) still occurred on the LOOP 1
of the HDSL link. |
| ctWanHDSLAlHistLOSW1Count | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.13 |
Number of times the Loss Of Sync Word (LOSW) occurred since we
last cleared the history on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistLOSW2First | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.14 |
Time stamp of the first time the Loss Of Sync Word (LOSW) occurred
on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistLOSW2Last | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.15 |
Time stamp of the last time the Loss Of Sync Word (LOSW) occurred
on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistLOSW2Current | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.16 |
Set if the Loss Of Sync Word (LOSW) still occurred on the LOOP 2
of the HDSL link. |
| ctWanHDSLAlHistLOSW2Count | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.17 |
Number of times the Loss Of Sync Word (LOSW) occurred since we
last cleared the history on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistES1First | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.18 |
Time stamp of the first time the Errored Seconds (ES) occurred
on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistES1Last | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.19 |
Time stamp of the last time the Errored Seconds (ES) occurred
on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistES1Current | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.20 |
Set if the Errored Seconds (ES) still occurred on the LOOP 1 of
the HDSL link. |
| ctWanHDSLAlHistES1Count | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.21 |
Number of times the Errored Seconds (ES) occurred since we last
cleared the alarm history on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistES2First | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.22 |
Time stamp of the first time the Errored Seconds (ES) occurred
on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistES2Last | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.23 |
Time stamp of the last time the Errored Seconds (ES) occurred
on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistES2Current | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.24 |
Set if the Errored Seconds (ES) still occurred on the LOOP 2 of
the HDSL link. |
| ctWanHDSLAlHistES2Count | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.25 |
Number of times the Errored Seconds (ES) occurred since we last
cleared the history on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistMargin1First | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.26 |
Time stamp of the first time the alarms exceeded the
Margin Threshold on LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistMargin1Last | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.27 |
Time stamp of the last time the alarms exceeded the Margin
Threshold on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistMargin1Current | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.28 |
Set if the alarms still exceeded the Margin Threshold
on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistMargin1Count | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.29 |
Number of times the alarm exceeded the Margin Threshold since
we last cleared the alarm history on the LOOP 1 of the HDSL link. |
| ctWanHDSLAlHistMargin2First | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.30 |
Time stamp of the first time the alarms exceeded the Margin
Threshold on LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistMargin2Last | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.31 |
Time stamp of the last time the alarms exceeded the Margin
Threshold on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistMargin2Current | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.32 |
Set if the alarms still exceeded the Margin Threshold
on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistMargin2Count | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.33 |
Number of times the alarm exceeded the Margin Threshold since
we last cleared the alarm history on the LOOP 2 of the HDSL link. |
| ctWanHDSLAlHistCleared | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.34 |
Time stamp of the time user requested to clear the alarm history. |
| ctWanHDSLAlHistClearit | .1.3.6.1.4.1.52.4.1.2.7.1.8.6.1.35 |
set to a 1 to clear the alarm history.
A read of this value always returns a 1.
NOTE: the setting of this object also causes the SNR low
value, SNR high value, and the performance history to be
reset. |
| ctWanHDSLLoopbacksHLUConnIndex | .1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.1 |
Identify the HDSL connection within the device |
| ctWanHDSLLoopbacksAdminType | .1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.2 |
This is the requested loopback type for the HDSL.
loopbacks setting:
1 : Smartjack - loopback to network at remote line unit.
2 : Loopback to network at local line unit.
3 : Loopback to network at remote line unit.
4 : Loopback to customer at local line unit.
5 : Loopback to customer at remote line unit.
6 : Loopback to customer at first doubler.
7 : Loopback to customer at second doubler.
8 : Loopback to network at first doubler.
9 : Loopback to network at second doubler.
10: No loopback (turn loopback off). |
| ctWanHDSLLoopbacksOperType | .1.3.6.1.4.1.52.4.1.2.7.1.8.7.1.3 |
This is the operational loopback type for the HDSL.
loopbacks setting:
1 : Smartjack - loopback to network at remote line unit.
2 : Loopback to network at local line unit.
3 : Loopback to network at remote line unit.
4 : Loopback to customer at local line unit.
5 : Loopback to customer at remote line unit.
6 : Loopback to customer at first doubler.
7 : Loopback to customer at second doubler.
8 : Loopback to network at first doubler.
9 : Loopback to network at second doubler.
10: No loopback (turn loopback off). |
| Table |
| wanConnTable | .1.3.6.1.4.1.52.4.1.2.7.1.1.2 |
A list of wan connection entries. The number of wan
connection entries is given by the value of wanNumConnections. |
| wanPhysPortTable | .1.3.6.1.4.1.52.4.1.2.7.1.1.3 |
A list of the descriptions of the physical ports of this
platform. The number of entries is given by the value
of wanConnNumPhysPort for each Wan Connection. |
| wanInterfaceTable | .1.3.6.1.4.1.52.4.1.2.7.1.1.4 |
The interface table for a physical port on a wan connection.
It is a list of items that are pertinent to the interfaces
that are part of this physical port. The number of entries
is dependent on the wanPhysPortType for the interface.
If the wanPhysPortType is none, there will be no entries
in the table for the port. If the wanPhysPortType is t1,
there will be 24 entries in this table for the port.
If the wanPhysPortType is e1, there will be 30 entries
in this table for the port. If the wanPhysPortType is
synchronous, there will be one entry in this table for the
port. |
| wanDs1ExtensionsTable | .1.3.6.1.4.1.52.4.1.2.7.1.2.1 |
This table is an extension to the standard ds1 configuration
table. It is a list of items that are pertinent to ds1 ports
on a platform. There is one entry per ds1 physical port on
the platform |
| wanRs232ExtensionsTable | .1.3.6.1.4.1.52.4.1.2.7.1.3.1 |
This table is an extension to the standard rs232-like mib.
It is a list of items that are pertinent to rs232-like ports
on a platform. There is one entry per synchronous physical
port on the platform. |
| frDcpCircuitTable | .1.3.6.1.4.1.52.4.1.2.7.1.4.1 |
A table containing data compression information about
specific Data Link Connection Identifiers and corresponding
virtual circuit. This information is used to support the
frCircuitTable following RFC-1315. |
| ddsConfigTable | .1.3.6.1.4.1.52.4.1.2.7.1.5.1 |
The DDS Configuration Table |
| ds1AlarmConfigTable | .1.3.6.1.4.1.52.4.1.2.7.1.6.2 |
Table containing objects used to configure DS1 alarm
functionality on a per DS1 basis. |
| ipPQAddressTable | .1.3.6.1.4.1.52.4.1.2.7.1.7.2 |
Table containing IP addresses, used in an
IP Priority Queue Forwarding function. |
| ctWanHDSLPerformance15mTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.1 |
HDSL 15 minute performance table. This table provides the
accumulated counts of errored seconds (ES) and unavailable
seconds (UAS) for the HDSL line including the local, remote
units and any doublers in between during a 15 minutes period
for the last 24 hours.
The table is indexed by the non-empty slot in the device and
the 15-minute history slot within the last 24 hours period. |
| ctWanHDSLPerformance24hTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.2 |
HDSL 24-hour performance table. This table provides the
accumulated counts of errored seconds (ES) and unavailable
seconds (UAS) for the HDSL line including the local, remote
units and any doublers in between during a 24-hour period
for the last 7 days.
The table is indexed by the non-empty slot in the device and
the 24-hour history slot within the last 7 days period. |
| ctWanHDSLStatisticsTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.3 |
This table collects the statistics for the Signal noise ratio
(SNR), and the pulse attenuation of the HDSL line, including
the local, remote units and the doublers in between. |
| ctWanHDSLTestTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.4 |
Test result for the HDSL line, the current test results only
apply to the local line unit. |
| ctWanHDSLAlarmsTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.5 |
This table collects the existing alarms information for the HDSL
line, including the local, remote line units and the doublers. |
| ctWanHDSLAlarmHistoryTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.6 |
HDSL Alarm History table. This table provides the accumulated
counts of Errored Seconds (ES) and Loss of Sync words (LOS)
as well as the time stamp of the above events occurred for both
of the HDSL loops.
The time stamps show the date in MMDDYYYYHHMM format. |
| ctWanHDSLLoopbacksTable | .1.3.6.1.4.1.52.4.1.2.7.1.8.7 |
HDSL Loopback table. This table provides the certain loopback
settings for the HDSL link. |
| Object Identifier |
| ctWanConnection | .1.3.6.1.4.1.52.4.1.2.7.1.1 |
| ctWanDs1 | .1.3.6.1.4.1.52.4.1.2.7.1.2 |
| ctWanRs232 | .1.3.6.1.4.1.52.4.1.2.7.1.3 |
| ctFrDcp | .1.3.6.1.4.1.52.4.1.2.7.1.4 |
| ctDDS | .1.3.6.1.4.1.52.4.1.2.7.1.5 |
| ctDs1Alarms | .1.3.6.1.4.1.52.4.1.2.7.1.6 |
| ctIPPQFilters | .1.3.6.1.4.1.52.4.1.2.7.1.7 |
| ctWanHDSLExt | .1.3.6.1.4.1.52.4.1.2.7.1.8 |
| ds1AlarmsGlobalConfigGroup | .1.3.6.1.4.1.52.4.1.2.7.1.6.1 |
| ipPQConfigGroup | .1.3.6.1.4.1.52.4.1.2.7.1.7.1 |