XYPLEX-BOOT-SERVER-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, Gauge
FROM RFC1155-SMI
DisplayString
FROM RFC1158-MIB
OBJECT-TYPE
FROM RFC1212-CONCISE-MIB
DateTime, AddressType
FROM XYPLEX-SYSTEM-MIB;
xyplex OBJECT IDENTIFIER ::= { enterprises 33 }
bootServer OBJECT IDENTIFIER ::= { xyplex 6 }
bsBasic OBJECT IDENTIFIER ::= { bootServer 1 }
dump OBJECT IDENTIFIER ::= { bootServer 2 }
load OBJECT IDENTIFIER ::= { bootServer 3 }
param OBJECT IDENTIFIER ::= { bootServer 4 }
basicLogLimit OBJECT-TYPE
SYNTAX INTEGER (1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum allowed number of kilobytes for recording
events. Corresponds directly to MANAGER LOG FILE
SIZE and the value labeled 'Log File Size:' in the
MANAGER CHARACTERISTICS display."
::= { bsBasic 1 }
basicActiveLimit OBJECT-TYPE
SYNTAX INTEGER (0..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum allowed number of simultaneous service
dialogs. Corresponds directly to MANAGER
SIMULTANEOUS and the value labeled 'Maximum
simultaneous requests:' in the MANAGER
CHARACTERISTICS display."
::= { bsBasic 2 }
basicActiveNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of active service dialogs. Corresponds
indirectly to the list of active clients in the
MANAGER STATUS display."
::= { bsBasic 3 }
basicClientNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of defined clients. Corresponds indirectly
to the list of defined clients in the MANAGER LOCAL,
MANAGER GLOBAL, and MANAGER NODE displays."
::= { bsBasic 4 }
basicOffersSent OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of service offers sent in response to
client requests. Corresponds directly to the value
labeled 'Total service offers sent:' in the MANAGER
STATUS display."
::= { bsBasic 5 }
basicEventTotal OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Total number of events that have been written to
the event log since it was last purged. This may be
less than the number currently in the log.
Corresponds directly to the value labeled 'Total
Messages Logged:' in the MANAGER EVENTS display."
::= { bsBasic 6 }
basicEventPurge OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to cause emptying the event log. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes the event log to immediately
become empty. Corresponds directly to the PURGE
MANAGER LOG FILE command."
::= { bsBasic 7 }
activeTable OBJECT-TYPE
SYNTAX SEQUENCE OF ActiveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of active client dialog entries. The number
of entries is given by basicActiveNumber."
::= { bsBasic 8 }
activeEntry OBJECT-TYPE
SYNTAX ActiveEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for an active client dialog
entry."
INDEX { activeIdentificationType, activeIdentification }
::= { activeTable 1 }
ActiveEntry ::=
SEQUENCE {
activeIdentificationType
AddressType,
activeIdentification
OCTET STRING,
activeFunction
INTEGER,
activeSoftwareVersionType
INTEGER,
activeSoftwareVersion
OCTET STRING,
activeParameterVersion
INTEGER,
activeCurrentSequence
INTEGER,
activeBytesRemaining
INTEGER,
activeFile
DisplayString,
activeStatus
INTEGER,
activeState
INTEGER
}
activeIdentificationType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of identification value in
activeIdentification. Corresponds indirectly to the
value labeled 'EthernetAddress' in the MANAGER
STATUS display."
::= { activeEntry 1 }
activeIdentification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of the active partner. Corresponds
directly to the value labeled 'EthernetAddress' in
the MANAGER STATUS display."
::= { activeEntry 2 }
activeFunction OBJECT-TYPE
SYNTAX INTEGER { parameterStore(1), load(2), dump(3),
imageUpdate(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The function the server is performing with the
partner. Corresponds directly to the value labeled
'Function' in the MANAGER STATUS display."
::= { activeEntry 3 }
activeSoftwareVersionType OBJECT-TYPE
SYNTAX INTEGER { alpha(1), beta(2),
production(3), special(4),
notApplicable(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If activeFunction is 'load', the software version
being sent to the client, otherwise 'notApplicable'.
Corresponds to the letter in the software version
labeled 'Version' in the MANAGER STATUS display.
alpha 'A': alpha test
beta 'B': beta test
production null: normal, production software
special 'S': special, custom software
"
::= { activeEntry 4 }
activeSoftwareVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If activeFunction is 'load', the 4-byte software
version being sent to the client, otherwise zero
length. In order, the octets contain major version,
minor version, ECO, and pre-release number.
Corresponds to the numbers in the software version
labeled 'Version' in the MANAGER STATUS display.
For example, the version display for
activeSoftwareVersionType 'production' and
activeSoftwareVersion '2.2.0.0' is 'V2.2'.
The version display for activeSoftwareVersionType
'beta' and activeSoftwareVersion '3.1.0.4' is
'V3.1B4'."
::= { activeEntry 5 }
activeParameterVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If activeFunction is 'parameterStore', the
parameter version being stored by the client,
otherwise zero. Corresponds directly to the value
labeled 'Version' in the MANAGER STATUS display."
::= { activeEntry 6 }
activeCurrentSequence OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current dialog sequence number. Corresponds
directly to the value labeled 'Seq' in the MANAGER
STATUS display."
::= { activeEntry 7 }
activeBytesRemaining OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes remaining to be transferred in
the dialog. Corresponds directly to the value
labeled 'Left' in the MANAGER STATUS display."
::= { activeEntry 8 }
activeFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the file being used in the dialog.
Corresponds directly to the value labeled 'File' in
the MANAGER STATUS display."
::= { activeEntry 9 }
activeStatus OBJECT-TYPE
SYNTAX INTEGER { none(1),
fileTooLarge(2),
notImageFile(3),
notExecutableFile(4),
badFileData(5),
deviceWriteProtected(6),
operationTimeout(7),
remoteFileNotFound(8),
remoteFileAccessViolation(9),
protocolError(10),
fileSystemError(11),
temporaryResourceConflict(12),
success(13) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The final status of the most recent attempt to get
an image. Corresponds directly to the value labeled
'Get Status:' in the DEVICE STATUS display."
::= { activeEntry 10 }
activeState OBJECT-TYPE
SYNTAX INTEGER { idle(1),
internal1(2),
internal2(3),
openPartner(4),
openFile(5),
receivePartner(6),
writeFile(7),
closePartner(8),
closeFile(9),
cleanup(10),
done(11),
error(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The dynamic state of an active attempt to get an
image. Corresponds directly to the value labeled
'Get State:' in the DEVICE STATUS display."
::= { activeEntry 11 }
clientTable OBJECT-TYPE
SYNTAX SEQUENCE OF ClientEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of client data base entries. The number of
entries is given by basicClientNumber."
::= { bsBasic 9 }
clientEntry OBJECT-TYPE
SYNTAX ClientEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a client data base entry."
INDEX { clientIdentificationType, clientIdentification }
::= { clientTable 1 }
ClientEntry ::=
SEQUENCE {
clientIdentificationType
AddressType,
clientIdentification
OCTET STRING,
clientEntryStatus
INTEGER,
clientName
DisplayString,
clientLoadFile
DisplayString,
clientDiagnosticFile
DisplayString,
clientLoadService
INTEGER,
clientDumpService
INTEGER
}
clientIdentificationType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of identification value in
clientIdentification. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays."
::= { clientEntry 1 }
clientIdentification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identification of the client, either a hardware
type or an Ethernet address, depending on
clientIdentificationType. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays."
::= { clientEntry 2 }
clientEntryStatus OBJECT-TYPE
SYNTAX INTEGER { invalid(1), valid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the entry. Set to 'invalid' to
remove the entry, which corresponds directly to the
PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands.
Actual removal of the entry is implementation
specific."
DEFVAL { valid }
::= { clientEntry 3 }
clientName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A name that may be used to identify the client.
Corresponds directly to the value labeled 'Name' in
the MANAGER NODE display."
DEFVAL { "" }
::= { clientEntry 4 }
clientLoadFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file with the client's load image. Corresponds
directly to the value labeled 'Load File' in the
MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays."
DEFVAL { "" }
::= { clientEntry 5 }
clientDiagnosticFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file with the client's diagnostic test image.
Corresponds directly to the value labeled 'Diag
File' in the MANAGER LOCAL, MANAGER GLOBAL, and
MANAGER NODE displays."
DEFVAL { "" }
::= { clientEntry 6 }
clientLoadService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing load service for the client.
Corresponds directly to the value labeled 'Load' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays."
DEFVAL { enabled }
::= { clientEntry 7 }
clientDumpService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing dump service for the client.
Corresponds directly to the value labeled 'Dump' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays."
DEFVAL { disabled }
::= { clientEntry 8 }
namedTable OBJECT-TYPE
SYNTAX SEQUENCE OF NamedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of named client data base entries. The
number of entries is given by basicClientNumber."
::= { bsBasic 10 }
namedEntry OBJECT-TYPE
SYNTAX NamedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a named client data base
entry."
INDEX { namedName }
::= { namedTable 1 }
NamedEntry ::=
SEQUENCE {
namedIdentificationType
AddressType,
namedIdentification
OCTET STRING,
namedEntryStatus
INTEGER,
namedName
DisplayString,
namedLoadFile
DisplayString,
namedDiagnosticFile
DisplayString,
namedLoadService
INTEGER,
namedDumpService
INTEGER
}
namedIdentificationType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of identification value in
namedIdentification. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays."
::= { namedEntry 1 }
namedIdentification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identification of the client, either a hardware
type or an Ethernet address, depending on
namedIdentificationType. Corresponds directly to
MANAGER NODE, MANAGER GLOBAL, and MANAGER LOCAL, and
the value labeled 'Ethernet Address' in the MANAGER
NODE display or 'Ethernet Address', 'Device', and
'Global Devices' or 'Local Devices' in the MANAGER
GLOBAL and LOCAL displays."
::= { namedEntry 2 }
namedEntryStatus OBJECT-TYPE
SYNTAX INTEGER { invalid(1), valid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the entry. Set to 'invalid' to
remove the entry, which corresponds directly to the
PURGE LOCAL, PURGE GLOBAL, and PURGE NODE commands.
Actual removal of the entry is implementation
specific."
DEFVAL { valid }
::= { namedEntry 3 }
namedName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A name that may be used to identify the client.
Corresponds directly to the value labeled 'Name' in
the MANAGER NODE display."
DEFVAL { "" }
::= { namedEntry 4 }
namedLoadFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file with the client's load image. Corresponds
directly to the value labeled 'Load File' in the
MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays."
DEFVAL { "" }
::= { namedEntry 5 }
namedDiagnosticFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The file with the client's diagnostic test image.
Corresponds directly to the value labeled 'Diag
File' in the MANAGER LOCAL, MANAGER GLOBAL, and
MANAGER NODE displays."
DEFVAL { "" }
::= { namedEntry 6 }
namedLoadService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing load service for the client.
Corresponds directly to the value labeled 'Load' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays."
DEFVAL { enabled }
::= { namedEntry 7 }
namedDumpService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing dump service for the client.
Corresponds directly to the value labeled 'Dump' in
the MANAGER LOCAL, MANAGER GLOBAL, and MANAGER NODE
displays."
DEFVAL { disabled }
::= { namedEntry 8 }
eventTable OBJECT-TYPE
SYNTAX SEQUENCE OF EventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of event entries. The number of entries is
given by basicEventNumber."
::= { bsBasic 11 }
eventEntry OBJECT-TYPE
SYNTAX EventEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a event entry."
INDEX { eventIndex }
::= { eventTable 1 }
EventEntry ::=
SEQUENCE {
eventIndex
INTEGER,
eventText
DisplayString
}
eventIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In identification number for an event. The value 1
indicates the oldest event in the file, with
subsequent numbers indicating sequential events.
The event text for a given number may change as a
circular event log wraps over its beginning.
Corresponds directly to the relative position of an
event in the MANAGER EVENTS display."
::= { eventEntry 1 }
eventText OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The text of the event, including date, time and
other information. Corresponds directly to the
individual event text in the MANAGER EVENTS
display."
::= { eventEntry 2 }
basicDeviceNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The system's number of mass-storage devices."
::= { bsBasic 12 }
deviceTable OBJECT-TYPE
SYNTAX SEQUENCE OF DeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of device entries. The number of entries is
given by basicDeviceNumber."
::= { bsBasic 13 }
deviceEntry OBJECT-TYPE
SYNTAX DeviceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a device entry."
INDEX { deviceIndex }
::= { deviceTable 1 }
DeviceEntry ::=
SEQUENCE {
deviceIndex
INTEGER,
deviceName
DisplayString,
deviceDescr
DisplayString,
deviceOperation
INTEGER,
deviceFormat
INTEGER,
deviceProtection
INTEGER,
deviceFormatMedium
INTEGER,
deviceGetFile
INTEGER,
deviceGetFileHostIdentificationType
AddressType,
deviceGetFileHostIdentification
OCTET STRING,
deviceGetFileName
DisplayString
}
deviceIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"In identification number for a device, in the range
1 to basicDeviceNumber"
::= { deviceEntry 1 }
deviceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A name by which the device is known in other
displays, such as 'C1' or 'D2'."
::= { deviceEntry 2 }
deviceDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..80))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Details of the device type, including, for example,
size, manufacturer, Flash versus RAM, and such.
Corresponds directly to the value labeled 'Device
Type: in the MANAGER DEVICE STATUS display."
::= { deviceEntry 3 }
deviceOperation OBJECT-TYPE
SYNTAX INTEGER { read(1), write(2), format(3), idle(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current operational state of the device.
Corresponds directly the value labeled 'Device
Operation:' in the MANAGER DEVICE STATUS display."
::= { deviceEntry 4 }
deviceFormat OBJECT-TYPE
SYNTAX INTEGER { unformatted(1), formatted(2),
unknown(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Formatting status of the device. Corresponds
directly the presence of one of the value labels
under the label 'Device Status:' in the MANAGER
DEVICE STATUS display."
::= { deviceEntry 5 }
deviceProtection OBJECT-TYPE
SYNTAX INTEGER { write-enabled(1), write-protected(2),
unknown(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Write-protect status of the device. Corresponds
directly the presence of one of the value labels
under the label 'Device Status:' in the MANAGER
DEVICE STATUS display."
::= { deviceEntry 6 }
deviceFormatMedium OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to cause formatting of the medium in the
device. In response to a get-request or
get-next-request, the agent always returns 'ready'
for this value. Setting the value to 'ready' has no
effect. Setting it to 'execute' causes the device
to be formatted. Corresponds directly to the FORMAT
DEVICE command."
::= { deviceEntry 7 }
deviceGetFile OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to cause getting a file to the device from
a remote host system. In response to a get-request
or get-next-request, the agent always returns
'ready' for this value. Setting the value to
'ready' has no effect. Setting it to 'execute'
causes the get to be attempted. Corresponds
directly to the GET DEVICE command.
When set to 'execute', the objects
deviceGetFileHostIdentificationType,
deviceGetFileHostIdentification, and
deviceGetFileName must be somewhere in the same set
request message."
::= { deviceEntry 8 }
deviceGetFileHostIdentificationType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of identification value in
deviceIdentification. Corresponds indirectly to
ADDRESS in the GET DEVICE command.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is 'undefined'."
::= { deviceEntry 9 }
deviceGetFileHostIdentification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identification of the host to get the file from,
with type depending on deviceIdentificationType.
Corresponds directly to ADDRESS in the GET DEVICE
command.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is zero length."
::= { deviceEntry 10 }
deviceGetFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the file to get. Corresponds directly
to LOAD FILE in the GET DEVICE command.
This object may not be set outside the context of
setting deviceGetFile to 'execute'. In response to
a get-request or get-next-request, the value of this
object is zero length."
::= { deviceEntry 11 }
dumpService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing dump service for any client.
Corresponds directly to DUMP and the value labeled
'Dump:' in the MANAGER CHARACTERISTICS display."
::= { dump 1 }
dumpDrive OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identification number of the disk drive where dumps
are stored. Corresponds directly to DUMP DRIVE and
the value labeled 'Dump Drive:' in the MANAGER
CHARACTERISTICS display."
::= { dump 2 }
dumpMerit OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Relative preference for this dump server over
others. Corresponds directly to DUMP MERIT and the
value labeled 'Dump Merit:' in the MANAGER
CHARACTERISTICS display."
::= { dump 3 }
dumpSize OBJECT-TYPE
SYNTAX INTEGER { small(1), full(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of dump file to keep. Corresponds directly to
DUMP SIZE and the value labeled 'Dump Size:' in the
MANAGER CHARACTERISTICS display."
::= { dump 4 }
dumpCompleted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of dumps completed since system
initialization. Corresponds directly to the value
labeled 'Dump Operations Completed:' in the MANAGER
STATUS display."
::= { dump 5 }
dumpActive OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of dumps in progress. Corresponds
directly to the value labeled 'Currently Dumping:'
in the MANAGER STATUS display."
::= { dump 6 }
dumpFileNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of dump files currently stored.
Corresponds directly to the value labeled 'Network
dump files' and 'files' in the MANAGER FILES
display."
::= { dump 7 }
dumpFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF DumpFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of dump file entries. The number of entries
is given by dumpFileNumber."
::= { dump 8 }
dumpFileEntry OBJECT-TYPE
SYNTAX DumpFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a dump file entry."
INDEX { dumpFileIdentificationType,
dumpFileIdentification }
::= { dumpFileTable 1 }
DumpFileEntry ::=
SEQUENCE {
dumpFileIdentificationType
AddressType,
dumpFileIdentification
OCTET STRING,
dumpFileEntryStatus
INTEGER,
dumpFileCreation
DateTime,
dumpFileSize
INTEGER
}
dumpFileIdentificationType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of identification value in
dumpFileIdentification. Corresponds indirectly to a
file name part in the section labeled 'Network dump
files' in the MANAGER FILES display."
::= { dumpFileEntry 1 }
dumpFileIdentification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of the dump file, an Ethernet
address, as indicated by dumpFileIdentificationType.
Corresponds indirectly to a file name part in the
section labeled 'Network dump files' in the MANAGER
FILES display."
::= { dumpFileEntry 2 }
dumpFileEntryStatus OBJECT-TYPE
SYNTAX INTEGER { invalid(1), valid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the entry. Set to 'invalid' to
remove the entry, which corresponds indirectly to
the PURGE MANAGER DUMP FILES command. Actual
removal of the entry is implementation specific."
::= { dumpFileEntry 3 }
dumpFileCreation OBJECT-TYPE
SYNTAX DateTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time the dump file was created. Corresponds
directly to a date and time in the section labeled
'Network dump files' in the MANAGER FILES display."
::= { dumpFileEntry 4 }
dumpFileSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes stored in the dump file.
Corresponds directly to the value labeled 'bytes' in
the section labeled 'Network dump files' in the
MANAGER FILES display."
::= { dumpFileEntry 5 }
loadService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing load service for any client.
Corresponds directly to LOAD and the value labeled
'Load:' in the MANAGER CHARACTERISTICS display."
::= { load 1 }
loadMerit OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Relative preference for this load server over
others. Corresponds directly to LOAD MERIT and the
value labeled 'Load Merit:' in the MANAGER
CHARACTERISTICS display."
::= { load 2 }
loadCompleted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of loads completed since system
initialization. Corresponds directly to the value
labeled 'Load Operations Completed:' in the MANAGER
STATUS display."
::= { load 3 }
loadActive OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of loads in progress. Corresponds
directly to the value labeled 'Currently Loading:'
in the MANAGER STATUS display."
::= { load 4 }
loadFileNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of load files currently stored.
Corresponds directly to the value labeled 'Load
image files' and 'files' in the MANAGER FILES
display."
::= { load 5 }
loadFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF LoadFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of load file entries. The number of entries
is given by loadFileNumber."
::= { load 6 }
loadFileEntry OBJECT-TYPE
SYNTAX LoadFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a load file entry."
INDEX { loadFileName }
::= { loadFileTable 1 }
LoadFileEntry ::=
SEQUENCE {
loadFileName
DisplayString,
loadFileCreation
DateTime,
loadFileSize
INTEGER,
loadFileSoftwareVersionType
INTEGER,
loadFileSoftwareVersion
OCTET STRING
}
loadFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of a load file. Corresponds directly to a
file name part in the section labeled 'Load image
files' in the MANAGER FILES display."
::= { loadFileEntry 1 }
loadFileCreation OBJECT-TYPE
SYNTAX DateTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time the load file was created. Corresponds
directly to a date and time in the section labeled
'Load image files' in the MANAGER FILES display."
::= { loadFileEntry 2 }
loadFileSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes stored in the load file.
Corresponds directly to the value labeled 'bytes' in
the section labeled 'Load image files' in the
MANAGER FILES display."
::= { loadFileEntry 3 }
loadFileSoftwareVersionType OBJECT-TYPE
SYNTAX INTEGER { alpha(1), beta(2),
production(3), special(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The software version type of the image in the load
file. Corresponds directly to a software version in
the section labeled 'Load image files' in the
MANAGER FILES display.
alpha 'A': alpha test
beta 'B': beta test
production null: normal, production software
special 'S': special, custom software
"
::= { loadFileEntry 4 }
loadFileSoftwareVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The software version of the image in the load file.
Corresponds directly to a software version in the
section labeled 'Load image files' in the MANAGER
FILES display.
For example, the version display for
loadFileSoftwareVersionType 'production' and
loadFileSoftwareVersion '2.2.0.0' is 'V2.2'.
The version display for loadFileSoftwareVersionType
'beta' and loadFileSoftwareVersion '3.1.0.4' is
'V3.1B4'."
::= { loadFileEntry 5 }
paramService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing parameter storage service for
any client. Corresponds directly to PARAMETER
SERVICE and the value labeled 'Parameter Service:'
in the MANAGER CHARACTERISTICS display."
::= { param 1 }
paramDefaultService OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing default parameter loading
service for any client. Corresponds directly to
PARAMETER DEFAULT SERVICE and the value labeled
'Parameter Default Service:' in the MANAGER
CHARACTERISTICS display."
::= { param 2 }
paramDrive OBJECT-TYPE
SYNTAX INTEGER (1..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identification number of the disk drive where
parameters are stored. Corresponds directly to
PARAMETER DRIVE and the value labeled 'Parameter
Drive:' in the MANAGER CHARACTERISTICS display."
::= { param 3 }
paramActive OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of params in progress. Corresponds
directly to the value labeled 'Currently Paraming:'
in the MANAGER STATUS display."
::= { param 4 }
paramStorageActive OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of parameter storage operations in
progress. Corresponds directly to the value labeled
'Currently saving parameters:' in the MANAGER STATUS
display."
::= { param 5 }
paramFileNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of parameter files currently stored.
Corresponds directly to the value labeled 'Parameter
files' and 'files' in the MANAGER FILES display."
::= { param 6 }
paramFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParamFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of param file entries. The number of
entries is given by paramFileNumber."
::= { param 7 }
paramFileEntry OBJECT-TYPE
SYNTAX ParamFileEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a param file entry."
INDEX { paramFileIdentificationType,
paramFileIdentification }
::= { paramFileTable 1 }
ParamFileEntry ::=
SEQUENCE {
paramFileIdentificationType
AddressType,
paramFileIdentification
OCTET STRING,
paramFileEntryStatus
INTEGER,
paramFileWrite
DateTime,
paramFileSize
INTEGER,
paramFileParameterVersion
INTEGER
}
paramFileIdentificationType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of identification value in
paramFileIdentification. Corresponds indirectly to
a file name part in the section labeled 'Parameter
files' in the MANAGER FILES display."
::= { paramFileEntry 1 }
paramFileIdentification OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of the param file, an Ethernet
address, as indicated by
paramFileIdentificationType. Corresponds indirectly
to a file name part in the section labeled
'Parameter files' in the MANAGER FILES display."
::= { paramFileEntry 2 }
paramFileEntryStatus OBJECT-TYPE
SYNTAX INTEGER { invalid(1), valid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the entry. Set to 'invalid' to
remove the entry, which corresponds indirectly to
the PURGE MANAGER PARAMETER FILES command. Actual
removal of the entry is implementation specific."
::= { paramFileEntry 3 }
paramFileWrite OBJECT-TYPE
SYNTAX DateTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time the parameter file was last written.
Corresponds directly to a date and time in the
section labeled 'Parameter files' in the MANAGER
FILES display."
::= { paramFileEntry 4 }
paramFileSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes stored in the param file.
Corresponds directly to the value labeled 'bytes' in
the section labeled 'Parameter files' in the MANAGER
FILES display."
::= { paramFileEntry 5 }
paramFileParameterVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version number of the parameter data in the
file. Corresponds directly to the value labeled
'ver' in the section labeled 'Parameter files' in
the MANAGER FILES display."
::= { paramFileEntry 6 }
END