XYPLEX-LAT-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, Gauge, TimeTicks
FROM RFC1155-SMI
DisplayString
FROM RFC1158-MIB
OBJECT-TYPE
FROM RFC1212-CONCISE-MIB;
xyplex OBJECT IDENTIFIER ::= { enterprises 33 }
lat OBJECT IDENTIFIER ::= { xyplex 3 }
latAnnounceServices OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for automatic, periodic announcement of
local services to the network. Corresponds directly
to SERVER ANNOUNCEMENTS and the presence of the
label 'Announcements' following the label 'Enabled
Characteristics:' in the SERVER CHARACTERISTICS
display."
::= { lat 1 }
latCircuitTimer OBJECT-TYPE
SYNTAX INTEGER (30..200)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of milleseconds to collect port input data
before sending it to the host. Corresponds directly
to SERVER CIRCUIT TIMER and the value labeled
'Circuit Timer:' in the SERVER CHARACTERISTICS
display."
::= { lat 2 }
latIdentificationLengthLimit OBJECT-TYPE
SYNTAX INTEGER (0..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of characters to store in the
instances of latVisibleServiceIdentification.
Corresponds directly to SERVER IDENTIFICATION SIZE
and the value labeled 'Identification Size:' in the
SERVER CHARACTERISTICS display."
::= { lat 3 }
latKeepaliveTimer OBJECT-TYPE
SYNTAX INTEGER (10..180)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds of inactivity before sending a
null message to the host. Corresponds directly to
SERVER KEEPALIVE TIMER and the value labeled
'Keepalive Timer:' in the SERVER CHARACTERISTICS
display."
::= { lat 4 }
latMulticastTimer OBJECT-TYPE
SYNTAX INTEGER (10..180)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Number of seconds between transmission of local
service announcements. Corresponds directly to
SERVER MULTICAST TIMER and the value labeled
'Multicast Timer:' in the SERVER CHARACTERISTICS
display."
::= { lat 5 }
latNodeLimit OBJECT-TYPE
SYNTAX INTEGER (0..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of service nodes to keep in the node
table. Corresponds directly to SERVER NODE LIMIT
and the value labeled 'Node Limit:' in the SERVER
CHARACTERISTICS display."
::= { lat 6 }
latNumber OBJECT-TYPE
SYNTAX INTEGER (0..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An arbitrary number assigned and used for
administrative purposes. Corresponds directly to
SERVER NUMBER and the value labeled 'Number:' in the
SERVER CHARACTERISTICS display."
::= { lat 7 }
latRetransmitLimit OBJECT-TYPE
SYNTAX INTEGER (4..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Maximum number of times to retransmit an
unacknowledged message. Corresponds directly to
SERVER RETRANSMIT LIMIT and the value labeled
'Retransmit Limit:' in the SERVER CHARACTERISTICS
display."
::= { lat 8 }
latLocalServiceGroups OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The list of group numbers allowed to use local
services, where a group number is in the range
0-255. The OCTET STRING contains a bitmap, with one
bit for each group. Corresponding bit numbers start
with 0 as the high-order bit of the first octet.
Corresponds directly to SERVER SERVICE GROUPS and
the value labeled 'Service Groups:' in the SERVER
CHARACTERISTICS display."
::= { lat 9 }
latGroupPurge OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for automatic deletion of all node table
entries when latServiceGroups or
latPortCurrentGroups is changed. Corresponds
directly to SERVER PURGE GROUP and the presence of
the label 'Purge Group' following the label 'Enabled
Characteristics:' in the SERVER CHARACTERISTICS
display."
::= { lat 10 }
latNodePurge OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for automatic deletion of all node table
entries with status 'reachable' when the number of
entries exceeds latNodeLimit. Corresponds directly
to SERVER PURGE NODE and the presence of the label
'Purge Node' following the label 'Enabled
Characteristics:' in the SERVER CHARACTERISTICS
display."
::= { lat 11 }
latNodesRejected OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of nodes not added to the node table because
there was no room. Corresponds directly to the
value labeled 'Discarded Nodes:' in the SERVER
STATUS display."
::= { lat 12 }
latInMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LAT messages received. Corresponds
directly to the value labeled 'Messages Received:'
in the SERVER COUNTERS display."
::= { lat 13 }
latOutMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LAT messages sent. Corresponds directly
to the value labeled 'Messages Transmitted:' in the
SERVER COUNTERS display."
::= { lat 14 }
latInSessionsAccepted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of incoming LAT session connection attempts
accepted. Corresponds directly to the value labeled
'Solicitations Accepted:' in the SERVER COUNTERS
display."
::= { lat 15 }
latInSessionsRejected OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of incoming LAT session connection attempts
rejected. Corresponds directly to the value labeled
'Solicitations Rejected:' in the SERVER COUNTERS
display."
::= { lat 16 }
latAddressChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times a service announcement contained a
node name already in the visible service table but
with a different address. Corresponds directly to
the value labeled 'Multiple Node Addresses:' in the
SERVER COUNTERS display."
::= { lat 17 }
latInDuplicates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of duplicate LAT messages received.
Corresponds directly to the value labeled
'Duplicates Received:' in the SERVER COUNTERS
display."
::= { lat 18 }
latOutRetransmits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LAT messages retransmitted due to no
acknowledgement. Corresponds directly to the value
labeled 'Messages Re-transmitted:' in the SERVER
COUNTERS display."
::= { lat 19 }
latInBadMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LAT messages received with invalid
format. Corresponds directly to the value labeled
'Illegal Messages Rcv'd:' in the SERVER COUNTERS
display."
::= { lat 20 }
latInBadSlots OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LAT messages received with invalid slot
format. Corresponds directly to the value labeled
'Illegal Slots Rcv'd:' in the SERVER COUNTERS
display."
::= { lat 21 }
latInBadMulticasts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of multicast LAT messages received with
invalid format. Corresponds directly to the value
labeled 'Illegal Multicasts Rcv'd:' in the SERVER
COUNTERS display."
::= { lat 22 }
latPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF LatPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of LAT character port entries."
::= { lat 23 }
latPortEntry OBJECT-TYPE
SYNTAX LatPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"LAT parameter values for a port."
INDEX { latPortIndex }
::= { latPortTable 1 }
LatPortEntry ::=
SEQUENCE {
latPortIndex
INTEGER,
latPortAuthorizedGroups
OCTET STRING,
latPortAutoPrompt
INTEGER,
latPortCurrentGroups
OCTET STRING,
latPortRemoteModification
INTEGER
}
latPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An index value that uniquely identifies a port.
The port identified by a particular value of this
index is the same port as identified by
charPortIndex in the Character MIB [11]."
::= { latPortEntry 1 }
latPortAuthorizedGroups OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The list of group numbers to which the port is
allowed to set access, where a group number is in
the range 0-255. The OCTET STRING contains a
bitmap, with one bit for each group. Corresponding
bit numbers start with 0 as the high-order bit of
the first octet. Corresponds directly to PORT
AUTHORIZED GROUPS and the value labeled 'Authorized
Groups:' in the PORT CHARACTERISTICS display."
::= { latPortEntry 2 }
latPortAutoPrompt OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for automatic stimulation of a host prompt
upon forming a new session. Corresponds directly to
PORT AUTOPROMPT and the presence of the label
'Autoprompt' following the label 'Enabled
Characteristics:' in the PORT CHARACTERISTICS
display."
::= { latPortEntry 3 }
latPortCurrentGroups OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The list of group numbers to which the port
currently has set access, where a group number is in
the range 0-255. The OCTET STRING contains a
bitmap, with one bit for each group. Corresponding
bit numbers start with 0 as the high-order bit of
the first octet. Corresponds directly to PORT
GROUPS and the value labeled 'Groups:' in the PORT
CHARACTERISTICS display."
::= { latPortEntry 4 }
latPortRemoteModification OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to allow the remote system to modify
certain physical port characteristics. Corresponds
directly to PORT REMOTE MODIFICATION and the
presence of the label 'Remote Modification'
following the label 'Enabled Characteristics:' in
the PORT CHARACTERISTICS display."
::= { latPortEntry 5 }
latOfferedServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF LatOfferedServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of offered service entries."
::= { lat 24 }
latOfferedServiceEntry OBJECT-TYPE
SYNTAX LatOfferedServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for an offered service entry."
INDEX { latOfferedServiceName }
::= { latOfferedServiceTable 1 }
LatOfferedServiceEntry ::=
SEQUENCE {
latOfferedServiceName
DisplayString,
latOfferedServiceStatus
INTEGER,
latOfferedServiceAllowConnections
INTEGER,
latOfferedServiceIdentification
DisplayString,
latOfferedServicePassword
DisplayString,
latOfferedServicePortMap
OCTET STRING,
latOfferedServiceQueuing
INTEGER
}
latOfferedServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of an offered service. Corresponds
directly to the name in a SERVICE command and the
value labeled 'Service:' in the SERVICE
CHARACTERISTICS display."
::= { latOfferedServiceEntry 1 }
latOfferedServiceStatus OBJECT-TYPE
SYNTAX INTEGER { invalid(1), valid(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the entry. Set to 'invalid' to
remove the entry, which corresponds directly to the
CLEAR SERVICE command. Actual removal of the entry
is implementation specific."
DEFVAL { valid }
::= { latOfferedServiceEntry 2 }
latOfferedServiceAllowConnections OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing incoming connections to the
service. Corresponds directly to SERVICE
CONNECTIONS and the presence of the label
'Connections' following the label 'Enabled
Characteristics:' in the SERVICE CHARACTERISTICS
display."
::= { latOfferedServiceEntry 3 }
latOfferedServiceIdentification OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Text to identify a service. Corresponds directly
to SERVICE IDENTIFICATION and the value labeled
'Identification:' in the SERVICE CHARACTERISTICS
display."
::= { latOfferedServiceEntry 4 }
latOfferedServicePassword OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The password a user must supply to use the service.
Corresponds directly to SERVICE PASSWORD and the
presence of the label 'Password' following the label
'Enabled Characteristics:' in the SERVICE
CHARACTERISTICS display.
When setting this value, the management system must
supply eight octets, filling with zeros from the
first octet. That is, the value '1ab42' would be
expressed as '0.0.0.0.0.1.ab.42'. Setting the value
to zero disables the password check.
When returning this value, the agent always returns
a zero length OCTET STRING."
::= { latOfferedServiceEntry 5 }
latOfferedServicePortMap OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The list of character ports offer the service. The
OCTET STRING contains a bitmap, with one bit for
each port, and enough octets for all the ports on
the system. Port numbers are as defined for
charPortIndex in the Character MIB [11].
Corresponding bit numbers start with 1 as the
high-order bit of the first octet. Corresponds
directly to port-list portion of SERVICE PORTS and
the value labeled 'Ports:' in the SERVICE
CHARACTERISTICS display."
::= { latOfferedServiceEntry 6 }
latOfferedServiceQueuing OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for allowing queuing of incoming
connections to the service when the service is busy.
Corresponds directly to SERVICE QUEUE and the
presence of the label 'Queuing' following the label
'Enabled Characteristics:' in the SERVICE
CHARACTERISTICS display."
::= { latOfferedServiceEntry 7 }
latVisibleServiceTable OBJECT-TYPE
SYNTAX SEQUENCE OF LatVisibleServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of visible service entries."
::= { lat 25 }
latVisibleServiceEntry OBJECT-TYPE
SYNTAX LatVisibleServiceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a visible service entry."
INDEX { latVisibleServiceName }
::= { latVisibleServiceTable 1 }
LatVisibleServiceEntry ::=
SEQUENCE {
latVisibleServiceName
DisplayString,
latVisibleServiceStatus
INTEGER,
latVisibleServiceNode
DisplayString,
latVisibleServiceConnectedSessions
Gauge,
latVisibleServiceIdentification
DisplayString,
latVisibleServiceRating
Gauge
}
latVisibleServiceName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of a visible service. Corresponds
directly to the name in a SERVICE command and the
value labeled 'Service Name' in the SERVICE SUMMARY
display."
::= { latVisibleServiceEntry 1 }
latVisibleServiceStatus OBJECT-TYPE
SYNTAX INTEGER { available(1), unavailable(2),
unknown(3), unreachable(4),
reachable(5), connected(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of communication with the service.
Corresponds directly to the value labeled 'Status'
in the SERVICE SUMMARY display."
::= { latVisibleServiceEntry 2 }
latVisibleServiceNode OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Name of a node offering the service. Corresponds
directly to the value labeled Node Name in the
SERVICE STATUS display."
::= { latVisibleServiceEntry 3 }
latVisibleServiceConnectedSessions OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of connected sessions to the service.
Corresponds directly to the number with the value
'Connected', labeled 'Status' in the SERVICE SUMMARY
display."
::= { latVisibleServiceEntry 4 }
latVisibleServiceIdentification OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Text to identify a service. The length is subject
to limitation by latIdentificationLengthLimit.
Corresponds directly to the value labeled
'Identification:' in the SERVICE SUMMARY display."
::= { latVisibleServiceEntry 5 }
latVisibleServiceRating OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Relative capacity of the service to accept
additional sessions. Corresponds directly to value
labeled Rating in the SERVICE STATUS display."
::= { latVisibleServiceEntry 6 }
latNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF LatNodeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of node entries."
::= { lat 26 }
latNodeEntry OBJECT-TYPE
SYNTAX LatNodeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Parameter values for a node entry."
INDEX { latNodeName }
::= { latNodeTable 1 }
LatNodeEntry ::=
SEQUENCE {
latNodeName
DisplayString,
latNodeStatus
INTEGER,
latNodeConnectedSessions
Gauge,
latNodeAddress
OCTET STRING,
latNodeDataLinkFrame
INTEGER,
latNodeIdentification
DisplayString,
latNodeGroups
OCTET STRING,
latNodeServiceNumber
Gauge,
latNodeZero
INTEGER,
latNodeZeroTime
TimeTicks,
latNodeInMessages
Counter,
latNodeOutMessages
Counter,
latNodeInSlots
Counter,
latNodeOutSlots
Counter,
latNodeInBytes
Counter,
latNodeOutBytes
Counter,
latNodeAddressChange
Counter,
latNodeInDuplicates
Counter,
latNodeOutRetransmits
Counter,
latNodeInBadMessages
Counter,
latNodeInBadSlots
Counter,
latNodeInSessionsAccepted
Counter,
latNodeInSessionsRejected
Counter
}
latNodeName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..16))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of a node. Corresponds directly to the
value labeled 'Node:' in the NODE STATUS display."
::= { latNodeEntry 1 }
latNodeStatus OBJECT-TYPE
SYNTAX INTEGER { available(1), unavailable(2),
unknown(3), unreachable(4),
reachable(5), connected(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of communication with the node. Corresponds
directly to the value labeled 'Status' in the NODE
STATUS display."
::= { latNodeEntry 2 }
latNodeConnectedSessions OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of connected sessions to the node.
Corresponds directly to the number with the value
'Connected', labeled 'Status' in the NODE STATUS
display."
::= { latNodeEntry 3 }
latNodeAddress OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Ethernet address of the node. Corresponds directly
to the value labeled 'Address:' in the NODE STATUS
display."
::= { latNodeEntry 4 }
latNodeDataLinkFrame OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum Ethernet frame used by the node.
Corresponds directly to the value labeled 'Data Link
Frame Size:' in the NODE STATUS display."
::= { latNodeEntry 5 }
latNodeIdentification OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..63))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Text that identifies the node. The size is subject
to limitation by latIdentificationLengtLimit.
Corresponds directly to the value labeled
'Identification' in the NODE STATUS display."
::= { latNodeEntry 6 }
latNodeGroups OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The list of group numbers to which the node
belongs, where a group number is in the range 0-255.
The OCTET STRING contains a bitmap, with one bit for
each group. Corresponding bit numbers start with 0
as the high-order bit of the first octet.
Corresponds directly to the value labeled 'Node
Groups:' in the NODE STATUS display."
::= { latNodeEntry 7 }
latNodeServiceNumber OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of entries for the node in the node service
table. Corresponds indirectly to the list of
services in the NODE STATUS display."
::= { latNodeEntry 8 }
latNodeZero OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to zero counters kept for the node. In
response to a get-request or get-next-request, the
agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'execute' causes all the system's counters to
be zeroed. Corresponds to the ZERO NODE command."
::= { latNodeEntry 9 }
latNodeZeroTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of hundredths of a second since the most
recent zeroing of the counters kept for the node,
such as through execution of sysZeroAll or
latNodeZero. Corresponds directly to the value
labeled 'Seconds Since Zeroed:' in the NODE COUNTERS
display."
::= { latNodeEntry 10 }
latNodeInMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT messages received from the node.
Corresponds directly to the value labeled 'Messages
Received:' in the NODE COUNTERS display."
::= { latNodeEntry 11 }
latNodeOutMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT messages sent to the node.
Corresponds directly to the value labeled 'Messages
Transmitted:' in the NODE COUNTERS display."
::= { latNodeEntry 12 }
latNodeInSlots OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT slots received from the node.
Corresponds directly to the value labeled 'Slots
Received:' in the NODE COUNTERS display."
::= { latNodeEntry 13 }
latNodeOutSlots OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT slots sent to the node.
Corresponds directly to the value labeled 'Slots
Transmitted:' in the NODE COUNTERS display."
::= { latNodeEntry 14 }
latNodeInBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of bytes received from the node,
including Ethernet overhead. Corresponds directly
to the value labeled 'Bytes Received:' in the NODE
COUNTERS display."
::= { latNodeEntry 15 }
latNodeOutBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of bytes sent to the node,
including Ethernet overhead. Corresponds directly
to the value labeled 'Bytes Transmitted:' in the
NODE COUNTERS display."
::= { latNodeEntry 16 }
latNodeAddressChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times a LAT message multicast by the
node had a different Ethernet address from the
previous time. Corresponds directly to the value
labeled 'Multiple Node Addresses:' in the NODE
COUNTERS display."
::= { latNodeEntry 17 }
latNodeInDuplicates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of duplicate LAT message received from
the node. Corresponds directly to the value labeled
'Duplicates Received:' in the NODE COUNTERS
display."
::= { latNodeEntry 18 }
latNodeOutRetransmits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT message retransmitted to the node
due to lack of acknowledgement. Corresponds
directly to the value labeled 'Messages
Re-transmitted:' in the NODE COUNTERS display."
::= { latNodeEntry 19 }
latNodeInBadMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT message received from the node
with invalid format. Corresponds directly to the
value labeled 'Illegal Messages Received:' in the
NODE COUNTERS display."
::= { latNodeEntry 20 }
latNodeInBadSlots OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT slots received from the node with
invalid format. Corresponds directly to the value
labeled 'Illegal Slots Received:' in the NODE
COUNTERS display."
::= { latNodeEntry 21 }
latNodeInSessionsAccepted OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT session connection attempts
received from the node and accepted. Corresponds
directly to the value labeled 'Solicitations
Accepted:' in the NODE COUNTERS display."
::= { latNodeEntry 22 }
latNodeInSessionsRejected OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of LAT session connection attempts
received from the node and rejected. Corresponds
directly to the value labeled 'Solicitations
Rejected:' in the NODE COUNTERS display."
::= { latNodeEntry 23 }
END