XYPLEX-SYSTEM-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, Gauge, TimeTicks
FROM RFC1155-SMI
DisplayString
FROM RFC1158-MIB
OBJECT-TYPE
FROM RFC1212-CONCISE-MIB
TRAP-TYPE
FROM RFC1215-DEFINING-TRAPS;
xyplex OBJECT IDENTIFIER ::= { enterprises 33 }
xSystem OBJECT IDENTIFIER ::= { xyplex 1 }
DateTime ::=
OCTET STRING (SIZE (8))
AddressType ::=
INTEGER { unknown(1), other(2), local(3),
ip(4), ethernet(5) }
sysIdent OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..50))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An identification string for local and remote
displays. Corresponds directly to SERVER
IDENTIFICATION and the value labeled
'Identification:' on the SERVER CHARACTERISTICS
display."
::= { xSystem 1 }
sysDefineMode OBJECT-TYPE
SYNTAX INTEGER { permOnly(1), operAndPerm(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The system's operation with regard to DEFINE
commands. 'permOnly' indicates that DEFINE commands
modify only the permanent data base. 'operAndPerm'
indicates that DEFINE commands modify both
operational and permanent data bases, unless
specifically documented to the contrary.
Corresponds to SERVER CHANGE and the presence of the
label CHANGE in the SERVER CHARACTERISTICS
display."
::= { xSystem 2 }
sysDateTime OBJECT-TYPE
SYNTAX DateTime
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The system's current local date and time.
Corresponds directly to SERVER DATE and SERVER TIME
and the value in various displays."
::= { xSystem 3 }
sysTimeZone OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The adjustment to apply to a universal (Greenwich)
time received when down-line loaded, comprising two
octets. The first octet is the number of hours west
of universal, the second is the number of minutes.
Corresponds directly to SERVER TIMEZONE and the
value labeled 'Timezone:' in the SERVER
CHARACTERISTICS display."
::= { xSystem 4 }
sysLoadSoftware OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The software file name to request for down-line
load of the server. Corresponds directly to SERVER
SOFTWARE, and the value labeled 'Software:' in the
SERVER CHARACTERISTICS display."
::= { xSystem 5 }
sysDump OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for dumping the system's memory when the
system crashes. Corresponds directly to SERVER DUMP
and the presence of 'Dump' under the label 'Enabled
Characteristics' in the SERVER CHARACTERISTICS
display."
::= { xSystem 6 }
sysMaintenancePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The password a management system must supply to
force the system to reboot or use the system's
remote console via the Maintenance Operation
Protocol (MOP). Corresponds directly to SERVER
MAINTENANCE PASSWORD.
When setting this value, the management system must
supply eight octets, filling with zeros from the
first octet. That is, the value '1ab42' would be
expressed as '0.0.0.0.0.1.ab.42'. Setting the value
to zero disables the password check.
When returning this value, the agent always returns
a zero length OCTET STRING."
::= { xSystem 7 }
sysLocalName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The system's local name. Corresponds directly to
SERVER NAME and the value labeled 'Name:' in the
SERVER CHARACTERISTICS display."
::= { xSystem 8 }
sysSoftwareVersionType OBJECT-TYPE
SYNTAX INTEGER { alpha(1), beta(2),
production(3), special(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The software version variant running in the system.
Corresponds to the letter in the software version in
the SERVER CHARACTERISTICS display.
alpha 'A': alpha test
beta 'B': beta test
production null: normal, production software
special 'S': special, custom software
"
::= { xSystem 9 }
sysSoftwareVersion OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The software version running in the system. In
order, the octets contain major version, minor
version, ECO, and pre-release number. Corresponds
to the numbers in the software version in the SERVER
CHARACTERISTICS display.
For example, the version display for
sysSoftwareVersionType 'production' and
sysSoftwareVersion '2.2.0.0' is 'V2.2'.
The version display for sysSoftwareVersionType
'beta' and sysSoftwareVersion '3.1.0.4' is
'V3.1B4'."
::= { xSystem 10 }
sysRomVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The firmware version of the bootstrap ROM installed
in the system. Corresponds directly to the value
labeled 'Rom' in the SERVER CHARACTERISTICS
display."
::= { xSystem 11 }
sysHardwareType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of hardware on which the system is
running, with values as defined in Xyplex Assigned
Numbers, Xyplex document number 420-0497.
Corresponds directly to the value labeled 'Hardware
Type:' in the UNIT display."
::= { xSystem 12 }
sysHardwareVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This version of hardware on which the system is
running. Corresponds directly to part of the value
labeled 'HW' in the SERVER CHARACTERISTICS
display."
::= { xSystem 13 }
sysChassisType OBJECT-TYPE
SYNTAX INTEGER { mx45xx(1), other(2), lanbusII(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of chassis in which the system is running.
Corresponds directly to part of the value labeled
'HW' in the SERVER CHARACTERISTICS display."
::= { xSystem 14 }
sysChassisVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This version of chassis in which the system is
running. Corresponds directly to part of the value
labeled 'HW' in the SERVER CHARACTERISTICS
display."
::= { xSystem 15 }
sysCrash OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to cause this system to crash. In response
to a get-request or get-next-request, the agent
always returns 'ready' for this value. Setting the
value to 'ready' has no effect. Setting it to
'execute' causes an immediate crash. Corresponds to
the CRASH command."
::= { xSystem 16 }
sysInitialize OBJECT-TYPE
SYNTAX INTEGER { ready(1), conditionalExecute(2),
unconditionalExecute(3), cancel(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to cause this system to reset its software
to initial load values, typically by reloading.
When executing an initialize command, the system
observes the value of sysInitializeDelay as supplied
anywhere in the same set request with sysInitialize.
If this value is not included in the set request,
the system uses its default value.
In response to a get-request or get-next-request,
the agent always returns 'ready' for this value.
Setting the value to 'ready' has no effect. Setting
it to 'conditionalExecute' causes initialization if
the overall system state is acceptible (such as not
needing to store permanent parameters). Setting it
to 'unconditionalExecute' causes initialization
regardless of the overall system state. Setting it
to 'cancel' aborts an initialization that has not
yet started. According to standard SNMP operation,
if the system is not in a proper state to accept a
given set request for this value, it returns the
standard SNMP error 'badValue'.
Corresponds to the INITIALIZE command."
::= { xSystem 17 }
sysInitializeDelay OBJECT-TYPE
SYNTAX INTEGER (0..32768)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of minutes to delay before beginning the
system initialization process as executed with
sysInitialize.
This value cannot be set outside a set-request that
contains the value 'execute' for sysInitialize. If
not included in such a set, the default value is 1.
Corresponds to the INITIALIZE command's DELAY
parameter and to the value labeled 'Minutes to
shutdown:' in the SYSTEM STATUS display."
::= { xSystem 18 }
sysZeroAll OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to zero all counters. In response to a
get-request or get-next-request, the agent always
returns 'ready' for this value. Setting the value
to 'ready' has no effect. Setting it to 'execute'
causes all the system's counters to be zeroed.
Corresponds to the ZERO ALL command."
::= { xSystem 19 }
sysZeroBase OBJECT-TYPE
SYNTAX INTEGER { ready(1), execute(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control to zero all base counters. In response to
a get-request or get-next-request, the agent always
returns 'ready' for this value. Setting the value
to 'ready' has no effect. Setting it to 'execute'
causes all the system's base counters to be zeroed.
Examples of counters that are zeroed are the SNMP
counters or the counters from the SYSTEM COUNTERS
display. Examples of counters that are not zeroed
are Ethernet interface counters or port counters.
Corresponds to the ZERO SYSTEM command."
::= { xSystem 20 }
sysZeroBaseTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number hundredths of a second since the most
recent zeroing of the base counters, such as through
execution of sysZeroAll or sysZeroBase. Corresponds
directly to the value labeled 'Seconds Since
Zeroed:' in the SERVER COUNTERS display."
::= { xSystem 21 }
sysLoaderName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the system that provided this system's
running software. Corresponds directly to the value
labeled 'Primary Host:' in the SERVER STATUS
display."
::= { xSystem 22 }
sysLoaderAddressType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of network address contained in
sysLoaderAddress. 'unknown' means no address has
been defined. 'other' means no other type value
applies. 'local' means there is no address and this
system's software was loaded from local storage.
'ip' is an Internet IP address. 'ethernet' is an
802.3 MAC address. Corresponds indirectly to the
value labeled 'Load Address:' in the SERVER STATUS
display."
::= { xSystem 23 }
sysLoaderAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network address of the system that provided
this system's running software. Corresponds
directly to the value labeled 'Load Address:' in the
SERVER STATUS display."
::= { xSystem 24 }
sysDumperAddressType OBJECT-TYPE
SYNTAX AddressType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of network address contained in
sysDumperAddress. 'unknown' means no address has
been defined. 'other' means no other type value
applies. 'local' means there is no address and this
system's was dumped to local storage. 'ip' is an
Internet IP address. 'ethernet' is an 802.3 MAC
address. Corresponds indirectly to the value
labeled 'Dump Address:' in the SERVER STATUS
display."
::= { xSystem 25 }
sysDumperAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network address of the system that most
recently accepted a crash dump from this system.
Corresponds directly to the value labeled 'Dump
Address:' in the SERVER STATUS display."
::= { xSystem 26 }
sysResourceLacks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times a local resource allocation
failed, for example due to lack of dynamic memory.
Corresponds directly to the value labeled 'Resource
Errors:' in the SERVER STATUS display."
::= { xSystem 27 }
sysChassisState OBJECT-TYPE
SYNTAX INTEGER { notApplicable(1), noFault(2), fault(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"For chassis-based systems, the state of the overall
chassis. 'notApplicable' indicates the system is
not chassis based. 'noFault' indicates no current
chassis problem. 'fault' indicates a current
chassis problem such as a card or power supply
failure. Corresponds directly to the value labeled
'Crate Current State: in the SERVER ALTERNATE STATUS
display."
::= { xSystem 28 }
sysChassisFaultTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this system has seen
sysChassisState switch from 'noFault' to 'fault' or
from 'fault' to 'noFault'. Corresponds directly to
the value labeled 'Crate Transition Count: in the
SERVER ALTERNATE STATUS display."
::= { xSystem 29 }
sysResourceNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of resource entries in the Resource
table."
::= { xSystem 30 }
sysFeatureNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of feature entries in the Feature
table."
::= { xSystem 31 }
resTable OBJECT-TYPE
SYNTAX SEQUENCE OF ResEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of resource entries. The number of entries
is given by the value of sysResourceNumber."
::= { xSystem 32 }
resEntry OBJECT-TYPE
SYNTAX ResEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status values for a system resource."
INDEX { resType }
::= { resTable 1 }
ResEntry ::=
SEQUENCE {
resType
INTEGER,
resCurrent
Gauge,
resWorst
Gauge,
resAdminMaximum
INTEGER,
resLacks
INTEGER,
resLackTime
DateTime,
resOperMaximum
INTEGER
}
resType OBJECT-TYPE
SYNTAX INTEGER { cpuPercent(1), memoryPercent(2),
process(3), timer(4), packetBuffer(5),
ipcMessage(6), textPool(7),
freeMemory(8), globalMemoryPercent(9),
phivDecnetRouteCache(10),
ipFilterCache(11), ipRouteCache(12),
ipxRouteCache(13), ipPolicyTable(14),
ipFilterTable(15) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of a resource type. Typically
corresponds directly to a label such as 'Processes:'
in the SERVER ALTERNATE STATUS display."
::= { resEntry 1 }
resCurrent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of resources currently in use on the
system. Typically corresponds directly to a value
labeled 'Cur' in the SERVER ALTERNATE STATUS
display."
::= { resEntry 2 }
resWorst OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The highest or lowest value of resCurrent since
system initialization. Typically corresponds
directly to a value labeled 'High' or 'Low' in the
SERVER ALTERNATE STATUS display."
::= { resEntry 3 }
resAdminMaximum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired maximum possible number of resources in
the system. In many cases, ACCESS to this object
for a particular resType is read-only. Typically
corresponds directly to a value labeled 'Max' in the
SERVER ALTERNATE STATUS display for desired,
administrative values. When the desired change
takes effect is implementation specific, ranging
from immediately to the next system
initialization."
::= { resEntry 4 }
resLacks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times since system initialization
that the system could not obtain the resource
because none were available. Typically corresponds
directly to a value labeled 'Failure' in the SERVER
ALTERNATE STATUS display.
If such failures do not apply to the particular
resource, such as 'cpuPercent', the agent returns
zero for this object."
::= { resEntry 5 }
resLackTime OBJECT-TYPE
SYNTAX DateTime
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The local system date and time when resLack last
increased. Typically corresponds directly to a
value labeled 'Last Occurred' in the SERVER
ALTERNATE STATUS display.
If such failures do not apply to the particular
resource, such as 'cpuPercent', the agent returns
all zeroes (unknown) for this object."
::= { resEntry 6 }
resOperMaximum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current maximum possible number of resources in
the system. Typically corresponds directly to a
value labeled 'Max' in the SERVER ALTERNATE STATUS
display for current operational values. This value
is based on current or previous value of
resAdminMaximum."
::= { resEntry 7 }
featTable OBJECT-TYPE
SYNTAX SEQUENCE OF FeatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of feature entries. The number of entries
is given by the value of sysFeatureNumber."
::= { xSystem 33 }
featEntry OBJECT-TYPE
SYNTAX FeatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status values for a system feature."
INDEX { featType }
::= { featTable 1 }
FeatEntry ::=
SEQUENCE {
featType
INTEGER,
featStatus
INTEGER
}
featType OBJECT-TYPE
SYNTAX INTEGER { help(1), snmp(2), xremote(3),
tn3270(4), menu(5), multisessions(6),
lat(7), eventLog(8),
internetSecurity(9), slip(10),
scriptServer(11), kerberos(12),
telnet(13), rlogin(14) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of a feature type. Corresponds to a
SERVER feature keyword."
::= { featEntry 1 }
featStatus OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The status of the feature as of the next system
initialization. Corresponds to the presence of the
feature's lable following the label 'Enabled
Feature(s): in the UNIT display."
::= { featEntry 2 }
bootControl OBJECT IDENTIFIER ::= { xSystem 34 }
bootControlLoadInternetFile OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The filename to request when loading an image via
TFTP. Corresponds directly to SERVER INTERNET LOAD
FILE and the value labeled 'Internet Load File:' in
the SERVER BOOT CHARACTERISTICS display."
::= { bootControl 1 }
bootControlLoadInternetServer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The internet address of the server to use when
loading an image via TFTP. Corresponds directly to
SERVER INTERNET LOAD HOST and the value labeled
'Internet Load Host:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 2 }
bootControlLoadInternetGateway OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The internet address of the gateway to use when
loading an image via TFTP. Corresponds directly to
SERVER INTERNET LOAD GATEWAY and the value labeled
'Internet Load Gateway:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 3 }
bootControlLoadBootpTftp OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading via the combination of BOOTP
and TFTP. Corresponds to SERVER LOAD PROTOCOL
BOOTPTFTP and the presence of 'BOOTP/TFTP/'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display."
::= { bootControl 4 }
bootControlLoadTftpDirect OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading via directed TFTP. Corresponds
to SERVER LOAD PROTOCOL TFTPDIRECT and the presence
of 'TFTPDIRECT' following the label 'Load Protocols
Enabled:' in the SERVER BOOT CHARACTERISTICS
display."
::= { bootControl 5 }
bootControlLoadLocal OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading from a local medium.
Corresponds to SERVER LOAD PROTOCOL LOCAL and the
presence of 'LOCAL' following the label 'Load
Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 6 }
bootControlLoadMop OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading via DEC MOP. Corresponds to
SERVER LOAD PROTOCOL MOP and the presence of 'MOP'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display."
::= { bootControl 7 }
bootControlLoadProprietary OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading via Xyplex-proprietary extended
MOP. Corresponds to SERVER LOAD PROTOCOL
PROPRIETARY and the presence of 'Proprietary'
following the label 'Load Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display."
::= { bootControl 8 }
bootControlLoadRarpTftp OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading via the combination of RARP and
TFTP. Corresponds to SERVER LOAD PROTOCOL RARPTFTP
and the presence of 'RARP/TFTP' following the label
'Load Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 9 }
bootControlDumpBootpTftp OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for dumping via the combination of BOOTP
and TFTP. Corresponds to SERVER DUMP PROTOCOL
BOOTPTFTP and the presence of 'BOOTP/TFTP' following
the label 'Dump Protocols Enabled:' in the SERVER
BOOT CHARACTERISTICS display."
::= { bootControl 10 }
bootControlDumpLocal OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for dumping to a local medium. Corresponds
to SERVER DUMP PROTOCOL LOCAL and the presence of
'Local' following the label 'Dump Protocols
Enabled:' in the SERVER BOOT CHARACTERISTICS
display."
::= { bootControl 11 }
bootControlDumpMop OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for dumping via DEC MOP. Corresponds to
SERVER DUMP PROTOCOL MOP and the presence of 'MOP'
following the label 'Dump Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display."
::= { bootControl 12 }
bootControlDumpProprietary OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for dumping via Xyplex-proprietary extended
MOP. Corresponds to SERVER DUMP PROTOCOL
PROPRIETARY and the presence of 'Proprietary'
following the label 'Dump Protocols Enabled:' in the
SERVER BOOT CHARACTERISTICS display."
::= { bootControl 13 }
bootControlDumpRarpTftp OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for dumping via the combination of RARP and
TFTP. Corresponds to SERVER DUMP PROTOCOL RARPTFTP
and the presence of 'RARP/TFTP' following the label
'Dump Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 14 }
bootControlParamBootpTftp OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading parameters via the combination
of BOOTP and TFTP. Corresponds to SERVER PARAMETER
PROTOCOL MOP and the presence of 'BOOTP/TFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display."
::= { bootControl 15 }
bootControlParamLocal OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading parameters from a local medium.
Corresponds to SERVER PARAMETER PROTOCOL LOCAL and
the presence of 'LOCAL' following the label
'Parameter Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 16 }
bootControlParamMop OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading parameters via DEC MOP.
Corresponds to SERVER PARAMETER PROTOCOL MOP and the
presence of 'MOP' following the label 'Parameter
Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 17 }
bootControlParamProprietary OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading parameters via
Xyplex-proprietary extended MOP. Corresponds to
SERVER PARAMETER PROTOCOL PROPRIETARY and the
presence of 'Proprietary' following the label
'Parameter Protocols Enabled:' in the SERVER BOOT
CHARACTERISTICS display."
::= { bootControl 18 }
bootControlParamRarpTftp OBJECT-TYPE
SYNTAX INTEGER { disabled(1), enabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Control for loading parameters via the combination
of RARP and TFTP. Corresponds to SERVER PARAMETER
PROTOCOL RARPTFTP and the presence of 'RARP/TFTP'
following the label 'Parameter Protocols Enabled:'
in the SERVER BOOT CHARACTERISTICS display."
::= { bootControl 19 }
sysInstalledMemory OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of bytes of main memory installed
in the system. Corresponds directly to the value
labeled 'Installed' on the SERVER ALTERNATE STATUS
display."
::= { xSystem 35 }
resourceLack TRAP-TYPE
ENTERPRISE xSystem
VARIABLES {
resType
}
DESCRIPTION
"Indication that the system incremented the
corresponding value of resLacks."
::= 1
END