Nortel-Magellan-Passport-AtmNetworkingMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
components,
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
RowPointer,
DisplayString,
StorageType,
RowStatus,
Gauge32,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
NonReplicated,
HexString,
FixedPoint1,
AsciiStringIndex,
IntegerSequence
FROM Nortel-Magellan-Passport-TextualConventionsMIB
atmIfVccIndex,
atmIfVptIndex,
atmIfVcc,
atmIfVpcIndex,
atmIfVpc,
atmIfVptVccIndex,
atmIfIndex,
atmIfVptVcc
FROM Nortel-Magellan-Passport-AtmCoreMIB;
atmNetworkingMIB OBJECT IDENTIFIER ::= { passportMIBs 42 }
aRtg OBJECT IDENTIFIER ::= { components 95 }
aRtgRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
aRtg components."
::= { aRtg 1 }
aRtgRowStatusEntry OBJECT-TYPE
SYNTAX ARtgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtg component."
INDEX {
aRtgIndex }
::= { aRtgRowStatusTable 1 }
ARtgRowStatusEntry ::= SEQUENCE {
aRtgRowStatus
RowStatus,
aRtgComponentName
DisplayString,
aRtgStorageType
StorageType,
aRtgIndex
NonReplicated }
aRtgRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtg components.
These components can be added and deleted."
::= { aRtgRowStatusEntry 1 }
aRtgComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgRowStatusEntry 2 }
aRtgStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtg tables."
::= { aRtgRowStatusEntry 4 }
aRtgIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtg tables."
::= { aRtgRowStatusEntry 10 }
aRtgStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the statistical operational attributes of an ARtg
component."
::= { aRtg 10 }
aRtgStatsEntry OBJECT-TYPE
SYNTAX ARtgStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgStatsTable."
INDEX {
aRtgIndex }
::= { aRtgStatsTable 1 }
ARtgStatsEntry ::= SEQUENCE {
aRtgRoutingAttempts
Counter32,
aRtgFailedRoutingAttempts
Counter32 }
aRtgRoutingAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of calls routed. The counter
wraps when it exceeds the maximum value."
::= { aRtgStatsEntry 1 }
aRtgFailedRoutingAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of calls which were not
successfully routed.The counter wraps when it exceeds the
maximum value."
::= { aRtgStatsEntry 2 }
aRtgDna OBJECT IDENTIFIER ::= { aRtg 2 }
aRtgDnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgDna components."
::= { aRtgDna 1 }
aRtgDnaRowStatusEntry OBJECT-TYPE
SYNTAX ARtgDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgDna component."
INDEX {
aRtgIndex,
aRtgDnaIndex }
::= { aRtgDnaRowStatusTable 1 }
ARtgDnaRowStatusEntry ::= SEQUENCE {
aRtgDnaRowStatus
RowStatus,
aRtgDnaComponentName
DisplayString,
aRtgDnaStorageType
StorageType,
aRtgDnaIndex
AsciiStringIndex }
aRtgDnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgDna components.
These components cannot be added nor deleted."
::= { aRtgDnaRowStatusEntry 1 }
aRtgDnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgDnaRowStatusEntry 2 }
aRtgDnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgDna tables."
::= { aRtgDnaRowStatusEntry 4 }
aRtgDnaIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..40))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgDna tables."
::= { aRtgDnaRowStatusEntry 10 }
aRtgDnaDestInfo OBJECT IDENTIFIER ::= { aRtgDna 2 }
aRtgDnaDestInfoRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgDnaDestInfoRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgDnaDestInfo components."
::= { aRtgDnaDestInfo 1 }
aRtgDnaDestInfoRowStatusEntry OBJECT-TYPE
SYNTAX ARtgDnaDestInfoRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgDnaDestInfo component."
INDEX {
aRtgIndex,
aRtgDnaIndex,
aRtgDnaDestInfoIndex }
::= { aRtgDnaDestInfoRowStatusTable 1 }
ARtgDnaDestInfoRowStatusEntry ::= SEQUENCE {
aRtgDnaDestInfoRowStatus
RowStatus,
aRtgDnaDestInfoComponentName
DisplayString,
aRtgDnaDestInfoStorageType
StorageType,
aRtgDnaDestInfoIndex
Integer32 }
aRtgDnaDestInfoRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgDnaDestInfo components.
These components cannot be added nor deleted."
::= { aRtgDnaDestInfoRowStatusEntry 1 }
aRtgDnaDestInfoComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgDnaDestInfoRowStatusEntry 2 }
aRtgDnaDestInfoStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgDnaDestInfo tables."
::= { aRtgDnaDestInfoRowStatusEntry 4 }
aRtgDnaDestInfoIndex OBJECT-TYPE
SYNTAX Integer32 (0..50)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgDnaDestInfo tables."
::= { aRtgDnaDestInfoRowStatusEntry 10 }
aRtgDnaDestInfoOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgDnaDestInfoOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the DestInfo
component."
::= { aRtgDnaDestInfo 10 }
aRtgDnaDestInfoOperEntry OBJECT-TYPE
SYNTAX ARtgDnaDestInfoOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgDnaDestInfoOperTable."
INDEX {
aRtgIndex,
aRtgDnaIndex,
aRtgDnaDestInfoIndex }
::= { aRtgDnaDestInfoOperTable 1 }
ARtgDnaDestInfoOperEntry ::= SEQUENCE {
aRtgDnaDestInfoType
INTEGER,
aRtgDnaDestInfoScope
INTEGER,
aRtgDnaDestInfoStdComponentName
RowPointer,
aRtgDnaDestInfoReachability
INTEGER }
aRtgDnaDestInfoType OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
alternate(1),
registered(2),
default(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the type of the address at the destination
interface. Provisioned addresses are assigned a type of primary or
alternate; ATM routing will try primary routes and then the
alternate routes if none of the primary routes succeed. The type
registered is used for dynamic addresses registered through ILMI.
The type default is used for Soft PVC addresses."
::= { aRtgDnaDestInfoOperEntry 1 }
aRtgDnaDestInfoScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the highest level (meaning the lowest level
number) in the hierarchy that the address will be advertised to.
A value of -1 indicates that the scope is not applicable since this
node has not been configured as a PNNI node."
::= { aRtgDnaDestInfoOperEntry 2 }
aRtgDnaDestInfoStdComponentName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents a component name of the interface through
which the address can be reached."
::= { aRtgDnaDestInfoOperEntry 3 }
aRtgDnaDestInfoReachability OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the address is internal or exterior."
::= { aRtgDnaDestInfoOperEntry 4 }
aRtgPnni OBJECT IDENTIFIER ::= { aRtg 3 }
aRtgPnniRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
aRtgPnni components."
::= { aRtgPnni 1 }
aRtgPnniRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnni component."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniRowStatusTable 1 }
ARtgPnniRowStatusEntry ::= SEQUENCE {
aRtgPnniRowStatus
RowStatus,
aRtgPnniComponentName
DisplayString,
aRtgPnniStorageType
StorageType,
aRtgPnniIndex
NonReplicated }
aRtgPnniRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnni components.
These components can be added and deleted."
::= { aRtgPnniRowStatusEntry 1 }
aRtgPnniComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniRowStatusEntry 2 }
aRtgPnniStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnni tables."
::= { aRtgPnniRowStatusEntry 4 }
aRtgPnniIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnni tables."
::= { aRtgPnniRowStatusEntry 10 }
aRtgPnniProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the generic provisionable attributes of a Pnni
component."
::= { aRtgPnni 10 }
aRtgPnniProvEntry OBJECT-TYPE
SYNTAX ARtgPnniProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniProvTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniProvTable 1 }
ARtgPnniProvEntry ::= SEQUENCE {
aRtgPnniNodeAddressPrefix
HexString,
aRtgPnniDefaultScope
Unsigned32,
aRtgPnniDomain
AsciiString,
aRtgPnniRestrictTransit
INTEGER,
aRtgPnniMaxReroutesOnCrankback
Unsigned32 }
aRtgPnniNodeAddressPrefix OBJECT-TYPE
SYNTAX HexString (SIZE (0..19))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the ATM address of this node. It allows the
default node address to be overridden. If this attribute is set to the
null string, then the default node address prefix is assumed, and
computed as follows: the value provisioned for the ModuleData
component's nodePrefix attribute, followed by a unique MAC
address (6 octets)."
::= { aRtgPnniProvEntry 1 }
aRtgPnniDefaultScope OBJECT-TYPE
SYNTAX Unsigned32 (0..104)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default PNNI scope for ATM addresses
associated with this node. The PNNI scope determines the level to
which the address will be advertised within the PNNI routing
domain. A provisioned Addr component may override the default
scope in a PnniInfo subcomponent.
A value of 0 means that all addresses which do not have
provisioned scopes will be advertised globally within the PNNI
routing domain.
The value specified must be numerically smaller than or equal to
that of the lowest level at which this node is configured in the PNNI
hierarchy."
DEFVAL { 0 }
::= { aRtgPnniProvEntry 2 }
aRtgPnniDomain OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the routing domain name. This attribute
should be set identically for all nodes in the same routing domain."
DEFVAL { '31'H }
::= { aRtgPnniProvEntry 3 }
aRtgPnniRestrictTransit OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies if the node should restrict tandeming of
SVCs.
If this attribute is set to true, then other lowest level nodes in the
PNNI hierarchy will avoid traversing this node during route
computation."
DEFVAL { false }
::= { aRtgPnniProvEntry 4 }
aRtgPnniMaxReroutesOnCrankback OBJECT-TYPE
SYNTAX Unsigned32 (0..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the number of alternate routing attempts
before a call requiring crank back is rejected."
DEFVAL { 1 }
::= { aRtgPnniProvEntry 5 }
aRtgPnniPglParmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniPglParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the peer group
leader election timer parameters of a Pnni component."
::= { aRtgPnni 11 }
aRtgPnniPglParmsEntry OBJECT-TYPE
SYNTAX ARtgPnniPglParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniPglParmsTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniPglParmsTable 1 }
ARtgPnniPglParmsEntry ::= SEQUENCE {
aRtgPnniPglInitTime
Unsigned32,
aRtgPnniOverrideDelay
Unsigned32,
aRtgPnniReElectionInterval
Unsigned32 }
aRtgPnniPglInitTime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how long this node will delay advertising its
choice of preferred peer group leader after having initialized
operation and reached the full peer state with at least one neighbor
in the peer group."
DEFVAL { 15 }
::= { aRtgPnniPglParmsEntry 1 }
aRtgPnniOverrideDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how long a node will wait for itself to be
declared the preferred peer group leader by unanimous agreement
among its peers."
DEFVAL { 30 }
::= { aRtgPnniPglParmsEntry 2 }
aRtgPnniReElectionInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how long this node will wait after losing
connectivity to the current peer group leader before re-starting the
process of electing a new peer group leader."
DEFVAL { 15 }
::= { aRtgPnniPglParmsEntry 3 }
aRtgPnniHlParmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniHlParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the default provisionable Hello protocol
parameters."
::= { aRtgPnni 12 }
aRtgPnniHlParmsEntry OBJECT-TYPE
SYNTAX ARtgPnniHlParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniHlParmsTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniHlParmsTable 1 }
ARtgPnniHlParmsEntry ::= SEQUENCE {
aRtgPnniHelloHoldDown
FixedPoint1,
aRtgPnniHelloInterval
Unsigned32,
aRtgPnniHelloInactivityFactor
Unsigned32 }
aRtgPnniHelloHoldDown OBJECT-TYPE
SYNTAX FixedPoint1 (1..655350)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to limit the rate at which this node sends out
Hello packets. Specifically, it specifies the default minimum amount
of time between successive Hellos used by routing control channels
on this node."
DEFVAL { 10 }
::= { aRtgPnniHlParmsEntry 1 }
aRtgPnniHelloInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default duration of the Hello Timer in
seconds for routing control channels on this node. Every
helloInterval seconds, this node will send out a Hello packet to the
neighbor node, subject to the helloHoldDown timer having expired
at least once since the last Hello packet was sent."
DEFVAL { 15 }
::= { aRtgPnniHlParmsEntry 2 }
aRtgPnniHelloInactivityFactor OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default number of Hello intervals
allowed to pass without receiving a Hello from the neighbor node,
before an attempt is made to re-stage, for routing control channels
on this node. The hello inactivity timer is enabled in the
oneWayInside, twoWayInside, oneWayOutside, twoWayOutside
and commonOutside (see the helloState attribute on the Rcc
component for a description of these states). Note that the value for
the Hello interval used in the calculation is the one specified in the
Hello packet from the neighbor node."
DEFVAL { 5 }
::= { aRtgPnniHlParmsEntry 3 }
aRtgPnniPtseParmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniPtseParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the PTSE timer
values of a Pnni component."
::= { aRtgPnni 13 }
aRtgPnniPtseParmsEntry OBJECT-TYPE
SYNTAX ARtgPnniPtseParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniPtseParmsTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniPtseParmsTable 1 }
ARtgPnniPtseParmsEntry ::= SEQUENCE {
aRtgPnniPtseHoldDown
FixedPoint1,
aRtgPnniPtseRefreshInterval
Unsigned32,
aRtgPnniPtseLifetimeFactor
Unsigned32,
aRtgPnniRequestRxmtInterval
Unsigned32,
aRtgPnniPeerDelayedAckInterval
FixedPoint1 }
aRtgPnniPtseHoldDown OBJECT-TYPE
SYNTAX FixedPoint1 (1..655350)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to limit the rate at which this node sends out
PTSE packets. Specifically, it specifies the minimum amount of
time in seconds that this node must wait between sending
successive PTSE packets."
DEFVAL { 10 }
::= { aRtgPnniPtseParmsEntry 1 }
aRtgPnniPtseRefreshInterval OBJECT-TYPE
SYNTAX Unsigned32 (300..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the duration of the PTSE Timer. Every
ptseRefreshInterval seconds, this node will send out a self-
originated PTSE packet to the neighbor node, subject to the
ptseHoldDown timer having expired at least once since the last
PTSE packet was sent."
DEFVAL { 1800 }
::= { aRtgPnniPtseParmsEntry 2 }
aRtgPnniPtseLifetimeFactor OBJECT-TYPE
SYNTAX Unsigned32 (101..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the lifetime multiplier. The result of
multiplying the ptseRefreshInterval by this value is used as the
initial lifetime that this node places into PTSEs."
DEFVAL { 200 }
::= { aRtgPnniPtseParmsEntry 3 }
aRtgPnniRequestRxmtInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the period between retransmissions of
unacknowledged Database Summary packets, PTSE Request
packets and PTSPs."
DEFVAL { 5 }
::= { aRtgPnniPtseParmsEntry 4 }
aRtgPnniPeerDelayedAckInterval OBJECT-TYPE
SYNTAX FixedPoint1 (1..655350)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the minimum amount of time between
transmissions of delayed PTSE acknowledgment packets."
DEFVAL { 1 }
::= { aRtgPnniPtseParmsEntry 5 }
aRtgPnniThreshParmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniThreshParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the change
thresholds of a ARtg Pnni component."
::= { aRtgPnni 14 }
aRtgPnniThreshParmsEntry OBJECT-TYPE
SYNTAX ARtgPnniThreshParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniThreshParmsTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniThreshParmsTable 1 }
ARtgPnniThreshParmsEntry ::= SEQUENCE {
aRtgPnniAvcrMt
Unsigned32,
aRtgPnniAvcrPm
Unsigned32 }
aRtgPnniAvcrMt OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute when multiplied by the Maximum Cell Rate specifies
the minimum threshold used in the algorithms that determine
significant change for average cell rate parameters."
DEFVAL { 3 }
::= { aRtgPnniThreshParmsEntry 1 }
aRtgPnniAvcrPm OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute when multiplied by the current Available Cell Rate
specifies the threshold used in the algorithms that determine
significant change for AvCR parameters. If the resulting threshold is
lower than minimum threshold, minimum threshold will be used.
Increasing the value of the attribute increases the range of
insignificance and reduces the amount of PTSP flooding due to
changes in resource availability."
DEFVAL { 50 }
::= { aRtgPnniThreshParmsEntry 2 }
aRtgPnniOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the generic operational attributes of an ARtg
Pnni component."
::= { aRtgPnni 15 }
aRtgPnniOperEntry OBJECT-TYPE
SYNTAX ARtgPnniOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniOperTable 1 }
ARtgPnniOperEntry ::= SEQUENCE {
aRtgPnniTopologyMemoryExhaustion
INTEGER }
aRtgPnniTopologyMemoryExhaustion OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if the topology database is overloaded.
A node goes into a database overload state when it fails to store the
complete topology database due to insufficient memory in the node.
A node in this state performs resynchronization periodically by
restarting all its Neighbor Peer Finite State Machines. The node will
stay in this state until it synchronizes with all of its neighbors
without any overload problems. When this attribute is set an alarm
will be issued."
::= { aRtgPnniOperEntry 2 }
aRtgPnniStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the statistical operational attributes of a ARtg
Pnni component."
::= { aRtgPnni 16 }
aRtgPnniStatsEntry OBJECT-TYPE
SYNTAX ARtgPnniStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniStatsTable."
INDEX {
aRtgIndex,
aRtgPnniIndex }
::= { aRtgPnniStatsTable 1 }
ARtgPnniStatsEntry ::= SEQUENCE {
aRtgPnniRoutingAttempts
Counter32,
aRtgPnniFailedRoutingAttempts
Counter32,
aRtgPnniCallsRerouted
Counter32 }
aRtgPnniRoutingAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts successful PNNI routing attempts. The counter
wraps when it exceeds the maximum value."
::= { aRtgPnniStatsEntry 1 }
aRtgPnniFailedRoutingAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts failed PNNI routing attempts. The counter
wraps when it exceeds the maximum value."
::= { aRtgPnniStatsEntry 2 }
aRtgPnniCallsRerouted OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts successful PNNI alternate routing attempts.
The counter wraps when it exceeds the maximum value."
::= { aRtgPnniStatsEntry 3 }
aRtgPnniOptMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniOptMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector that specifies the optimization metric for
each ATM service category. The optimization metric is used during
Generic Connection Admission Control (GCAC) route
computation.
Setting the value to cdv for a particular service category will cause
GCAC to optimize for cell delay variation on call setups requiring
that service category.
Setting the value to maxCtd for a particular service category will
cause GCAC to optimize for maximum cell transfer delay on call
setups requiring that service category.
Setting the value to aw for a particular service category will cause
GCAC to optimize for administrative weight on call setups
requiring that service category."
::= { aRtgPnni 386 }
aRtgPnniOptMetricEntry OBJECT-TYPE
SYNTAX ARtgPnniOptMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniOptMetricTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniOptMetricIndex }
::= { aRtgPnniOptMetricTable 1 }
ARtgPnniOptMetricEntry ::= SEQUENCE {
aRtgPnniOptMetricIndex
INTEGER,
aRtgPnniOptMetricValue
INTEGER }
aRtgPnniOptMetricIndex OBJECT-TYPE
SYNTAX INTEGER {
cbr(1),
rtVbr(2),
nrtVbr(3),
ubr(4) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the aRtgPnniOptMetricTable
specific index for the aRtgPnniOptMetricTable."
::= { aRtgPnniOptMetricEntry 1 }
aRtgPnniOptMetricValue OBJECT-TYPE
SYNTAX INTEGER {
cdv(0),
maxCtd(1),
aw(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
aRtgPnniOptMetricTable."
::= { aRtgPnniOptMetricEntry 2 }
aRtgPnniRf OBJECT IDENTIFIER ::= { aRtgPnni 2 }
aRtgPnniRfRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRfRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
aRtgPnniRf components."
::= { aRtgPnniRf 1 }
aRtgPnniRfRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniRfRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniRf component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniRfIndex }
::= { aRtgPnniRfRowStatusTable 1 }
ARtgPnniRfRowStatusEntry ::= SEQUENCE {
aRtgPnniRfRowStatus
RowStatus,
aRtgPnniRfComponentName
DisplayString,
aRtgPnniRfStorageType
StorageType,
aRtgPnniRfIndex
NonReplicated }
aRtgPnniRfRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniRf components.
These components cannot be added nor deleted."
::= { aRtgPnniRfRowStatusEntry 1 }
aRtgPnniRfComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniRfRowStatusEntry 2 }
aRtgPnniRfStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniRf tables."
::= { aRtgPnniRfRowStatusEntry 4 }
aRtgPnniRfIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniRf tables."
::= { aRtgPnniRfRowStatusEntry 10 }
aRtgPnniRfCriteriaTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRfCriteriaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the attributes specifying the routing criteria for
the route computation."
::= { aRtgPnniRf 10 }
aRtgPnniRfCriteriaEntry OBJECT-TYPE
SYNTAX ARtgPnniRfCriteriaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniRfCriteriaTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniRfIndex }
::= { aRtgPnniRfCriteriaTable 1 }
ARtgPnniRfCriteriaEntry ::= SEQUENCE {
aRtgPnniRfDestinationAddress
HexString,
aRtgPnniRfMaxRoutes
Unsigned32,
aRtgPnniRfTxTrafficDescType
INTEGER,
aRtgPnniRfRxTrafficDescType
INTEGER,
aRtgPnniRfAtmServiceCategory
INTEGER,
aRtgPnniRfFwdQosClass
INTEGER,
aRtgPnniRfBwdQosClass
INTEGER,
aRtgPnniRfBearerClassBbc
INTEGER,
aRtgPnniRfTransferCapabilityBbc
INTEGER,
aRtgPnniRfClippingBbc
INTEGER,
aRtgPnniRfBestEffort
INTEGER,
aRtgPnniRfOptimizationMetric
INTEGER }
aRtgPnniRfDestinationAddress OBJECT-TYPE
SYNTAX HexString (SIZE (1..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the destination NSAP address to be used for
the computation. If this attribute specifies an invalid address then no
routes will be found."
::= { aRtgPnniRfCriteriaEntry 1 }
aRtgPnniRfMaxRoutes OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies a ceiling on the number of routes to be
computed."
DEFVAL { 1 }
::= { aRtgPnniRfCriteriaEntry 2 }
aRtgPnniRfTxTrafficDescType OBJECT-TYPE
SYNTAX INTEGER {
n1(1),
n2(2),
n3(3),
n4(4),
n5(5),
n6(6),
n7(7),
n8(8) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of traffic management which is
applied to the transmit direction as defined in the ATM Forum. The
txTrafficDescType determines the number and meaning of the
parameters in the txTrafficDescParm attribute."
DEFVAL { n1 }
::= { aRtgPnniRfCriteriaEntry 3 }
aRtgPnniRfRxTrafficDescType OBJECT-TYPE
SYNTAX INTEGER {
n1(1),
n2(2),
n3(3),
n4(4),
n5(5),
n6(6),
n7(7),
n8(8),
sameAsTx(15) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of traffic management which is
applied to the receive direction of this connection as defined in the
ATM Forum. The rxTrafficDescType determines the number and
meaning of the parameters in the rxTrafficDescParm attribute
When sameAsTx is selected, the rxTrafficDescType as well as the
rxTrafficDescParm are taken from the transmit values."
DEFVAL { sameAsTx }
::= { aRtgPnniRfCriteriaEntry 5 }
aRtgPnniRfAtmServiceCategory OBJECT-TYPE
SYNTAX INTEGER {
unspecifiedBitRate(0),
constantBitRate(1),
rtVariableBitRate(2),
nrtVariableBitRate(3),
derivedFromBBC(15) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the ATM service category for both directions
of the connection.
If this attribute is set to derivedFromBBC, the Broadband Bearer
Capability (BBC) and bestEffort attributes are used to determine the
atmServiceCategory of this connection.
If this attribute is set to other than derivedFromBBC, the value of
this attribute is used to override the provisioned BBC IE parameters.
In those cases, the BBC attributes are not used.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application.
VBR real time service may support statistical multiplexing of real
time sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. VBR non-real time service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection."
DEFVAL { unspecifiedBitRate }
::= { aRtgPnniRfCriteriaEntry 6 }
aRtgPnniRfFwdQosClass OBJECT-TYPE
SYNTAX INTEGER {
n0(0),
n1(1),
n2(2),
n3(3),
n4(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the quality of service for the forward
direction for this connection.
Class 1 supports a QOS that will meet Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that will meet Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that will meet Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that will meet Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters."
DEFVAL { n0 }
::= { aRtgPnniRfCriteriaEntry 10 }
aRtgPnniRfBwdQosClass OBJECT-TYPE
SYNTAX INTEGER {
n0(0),
n1(1),
n2(2),
n3(3),
n4(4),
sameAsFwd(15) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the quality of service for the backward
direction for this connection.
Class 1 supports a QOS that will meet Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that will meet Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that will meet Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that will meet Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters.
The sameAsFwd selection sets the backward quality of service to
be the same as the forward quality of service."
DEFVAL { sameAsFwd }
::= { aRtgPnniRfCriteriaEntry 11 }
aRtgPnniRfBearerClassBbc OBJECT-TYPE
SYNTAX INTEGER {
a(1),
c(3),
x(16),
derivedFromServiceCategory(31) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the bearer capability. It is one of the
Broadband Bearer Capability (BBC) attributes. The purpose of the
BBC information element is to indicate a requested broadband
connection-oriented bearer service to be provided by the network.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both.
Class a service is a connection-oriented, constant bit rate ATM
transport service. Class a service has end to end timing
requirements and may require stringent cell loss, cell delay and cell
delay variation performance.When a is set, the user is requesting
more than an ATM only service. The network may look at the AAL
to provide interworking based upon its contents.
Class c service is a connection-oriented, variable bit rate ATM
transport service. Class c service has no end-to-end timing
requirements. When c is set, the user is requesting more than an
ATM only service. The network interworking function may look at
the AAL and provide service based on it.
Class x service is a connection-oriented ATM transport service
where the AAL, trafficType (vbr or cbr) and timing requirements
are user defined (that is, transparent to the network).When x is set
the user is requesting an ATM only service from the network. In this
case, the network shall not process any higher layer protocol."
DEFVAL { derivedFromServiceCategory }
::= { aRtgPnniRfCriteriaEntry 12 }
aRtgPnniRfTransferCapabilityBbc OBJECT-TYPE
SYNTAX INTEGER {
n0(0),
n1(1),
n2(2),
n5(5),
n8(8),
n9(9),
n10(10),
notApplicable(30),
derivedFromServiceCategory(31) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the transfer capability for this connection.
Uni 3.0/3.1 traffic type and end-to-end timing parameters are
mapped into this parameter as follows:
<transferCapability : TrafficType, Timing>
0 : NoIndication, NoIndication
1 : NoIndication, yes
2 : NoIndication, no
5 : CBR, yes
8 : VBR, NoIndication
9 : VBR, yes
10: VBR, no
NotApplicable specifies that the user does not want to specify the
transfer capability.
The CBR traffic type refers to traffic offered on services such as a
constant bit rate video service or a circuit emulation.
The VBR traffic type refers to traffic offered on services such as
packetized audio and video, or data.
The value NoIndication for traffic type is used if the user has not set
the traffic type; this is also the case for end-to-end timing.
The value yes for end-to-end timing indicates that end-to-end
timing is required.
The value no for end-to-end timing indicates that end-to-end timing
is not required.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both."
DEFVAL { derivedFromServiceCategory }
::= { aRtgPnniRfCriteriaEntry 13 }
aRtgPnniRfClippingBbc OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value for the clipping susceptibility
parameter in the BBC IE. This attribute is only used for SPVC
connections. It is one of the Broadband Bearer Capability attributes.
Clipping is an impairment in which the first fraction of a second of
information to be transferred is lost. It occurs after a call is
answered and before an associated connection is switched through."
DEFVAL { no }
::= { aRtgPnniRfCriteriaEntry 14 }
aRtgPnniRfBestEffort OBJECT-TYPE
SYNTAX INTEGER {
indicated(0),
notIndicated(1),
derivedFromServiceCategory(15) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the best effort parameter in the
ATM Traffic Descriptor IE. It is one of the Broadband Bearer
Capability attributes.
The value indicated implies that the quality of service for this
connection is not guaranteed.
The value notIndicated implies that the quality of service for this
connection is guaranteed.
The value derivedFromServiceCategory specifies that the actual
value which is used for this connection is derived from the value of
the atmServiceCategory. Either, this attribute must be set to
derivedFromServiceCategory, or the atmServiceCategory attribute
must be set to derivedFromBBC, but not both.
DESCRIPTION"
DEFVAL { derivedFromServiceCategory }
::= { aRtgPnniRfCriteriaEntry 15 }
aRtgPnniRfOptimizationMetric OBJECT-TYPE
SYNTAX INTEGER {
cdv(0),
maxCtd(1),
aw(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the optimization metric to be used in the
route computation; one of cell delay variation (cdv), maximum cell
transfer delay (maxCtd), or administrative weight (aw)."
DEFVAL { aw }
::= { aRtgPnniRfCriteriaEntry 16 }
aRtgPnniRfRxTdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRfRxTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector of four traffic parameters whose meanings
are defined by the rxTrafficDescType attribute. The values of peak
cell rate (PCR) and sustained cell rate (SCR) are expressed in
cell/s. Maximum burst size (MBS) is expressed in cells. The value
of CDVT is expressed in microseconds. The values of PCR, SCR,
MBS and CDVT are used for usage parameter control (UPC).
When rxTrafficDescType is 1 or 2, all of the parameters must be set
to zero (unused).
When rxTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic. Parameter 1 must be non-zero.
Parameters 2 and 3 must be set to zero (unused).
When rxTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell discard. Parameters 1 and 2 must be
non-zero. Parameter 3 must be set to zero (unused). Parameter 1
must be greater than or equal to parameter 2.
When rxTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the PCR for
CLP equal to 0 traffic with cell tagging. Parameters 1 and 2 must be
non-zero. Parameter 3 must be set to zero (unused). Parameter 1
must be greater than or equal to parameter 2.
When rxTrafficDescType is a 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic. Parameters 1, 2 and 3 must be non-
zero. Parameter 1 must be greater than or equal to Parameter 2.
When rxTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell discard; parameter 3 represents the
MBS for CLP equal to 0 traffic. Parameters 1, 2 and 3 must be non-
zero. Parameter 1 must be greater than or equal to parameter 2.
When rxTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic. Parameter 1, 2 and 3 must be non-
zero. Parameter 1 must be greater than or equal to parameter 2.
When rxTrafficDescType is any value from 3 through 8, parameter
4 represents the CDVT. If this value is zero, the CDVT is taken
from the ConnectionAdministrator defaults for the particular
atmServiceCategory of this connection.
When rxTrafficDescriptorType is 3 through 8, there are certain
extreme combinations of rxTrafficDescParm which are outside the
capabilities of the UPC hardware.
To calculate the limits, use the following formulae:
I1 = 1 000 000 000 / PCR
L1 = CDVT * 1000
I2 = 1 000 000 000 / SCR
L2 = CDVT + (MBS - 1) * (I2 - I1)
I1 and I2 must be less than or equal to 335 523 840. I1 + L1 must
be less than or equal to 1 342 156 800. I2 + L2 must be less than or
equal to 1 342 156 800. Note that I2 and L2 only apply when the
rxTrafficDescriptorType is 6 through 8.
If the values of I1, L1, I2 or L2 are closer to the limits described
above, a further restriction applies. Specifically, if either:
I1 > 41 940 480 or
I2 > 41 940 480 or
I1 + L1 > 167 769 600 or
I2 + L2 > 167 769 600
then both I1 and I2 must be greater than 20 480.
Parameter 5 of the rxTrafficDescParm is always unused.
If the rxTrafficDescType is sameAsTx, the values in this attribute
will be taken from the txTrafficDescParm."
::= { aRtgPnniRf 388 }
aRtgPnniRfRxTdpEntry OBJECT-TYPE
SYNTAX ARtgPnniRfRxTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniRfRxTdpTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniRfIndex,
aRtgPnniRfRxTdpIndex }
::= { aRtgPnniRfRxTdpTable 1 }
ARtgPnniRfRxTdpEntry ::= SEQUENCE {
aRtgPnniRfRxTdpIndex
Integer32,
aRtgPnniRfRxTdpValue
Unsigned32 }
aRtgPnniRfRxTdpIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the aRtgPnniRfRxTdpTable
specific index for the aRtgPnniRfRxTdpTable."
::= { aRtgPnniRfRxTdpEntry 1 }
aRtgPnniRfRxTdpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
aRtgPnniRfRxTdpTable."
::= { aRtgPnniRfRxTdpEntry 2 }
aRtgPnniRfTxTdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRfTxTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector of five traffic parameters whose meanings
are defined by the txTrafficDescType attribute. The values of peak
cell rate (PCR), sustained cell rate (SCR) and requested shaping rate
are expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When txTrafficDescType is 1 or 2, all of the parameters must be set
to zero.
When txTrafficDescType is 3, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When txTrafficDescType is 4, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic with cell discard; parameter 2
represents the PCR for CLP equal to 0 traffic; parameter 4
represents the CDVT; and parameter 5 represents the requested
shaping rate. A non-zero value in parameter 5 overrides any value in
parameter 1. This result is used as the PCR. Parameter 1 must be
greater than or equal to parameter 2. Parameters 1 and 2 must be
non-zero. Parameter 3 must be zero.
When txTrafficDescType is 5, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic with cell tagging; parameter 2
represents the PCR for CLP equal to 0 traffic; parameter 4
represents the CDVT; and parameter 5 represents the requested
shaping rate. A non-zero value in parameter 5 overrides any value in
parameter 1. This result is used as the PCR. Parameter 1 must be
greater than or equal to parameter 2. Parameters 1 and 2 must be
non-zero. Parameter 3 must be zero.
When txTrafficDescType is 6, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for
CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
When txTrafficDescType is 7, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 with cell discard; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
When txTrafficDescType is 8, parameter 1 represents the PCR for
CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for
CLP equal to 0 traffic with cell tagging; parameter 3 represents the
MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT;
and parameter 5 represents the requested shaping rate. A non-zero
value in parameter 5 overrides any value in parameter 1. This result
is used as the PCR. Parameters 1, 2 and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5, must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For txTrafficDescType 3, 4 and 5, the transmit traffic will be shaped
at the next rate less than the PCR.
For txTrafficDescType 6, 7 and 8, the transmit traffic will be shaped
at the highest available rate which is between PCR and SCR.
However, if there is no available shaping rate between PCR and
SCR, traffic will be shaped at the next rate above the PCR."
::= { aRtgPnniRf 389 }
aRtgPnniRfTxTdpEntry OBJECT-TYPE
SYNTAX ARtgPnniRfTxTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniRfTxTdpTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniRfIndex,
aRtgPnniRfTxTdpIndex }
::= { aRtgPnniRfTxTdpTable 1 }
ARtgPnniRfTxTdpEntry ::= SEQUENCE {
aRtgPnniRfTxTdpIndex
Integer32,
aRtgPnniRfTxTdpValue
Unsigned32 }
aRtgPnniRfTxTdpIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the aRtgPnniRfTxTdpTable
specific index for the aRtgPnniRfTxTdpTable."
::= { aRtgPnniRfTxTdpEntry 1 }
aRtgPnniRfTxTdpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
aRtgPnniRfTxTdpTable."
::= { aRtgPnniRfTxTdpEntry 2 }
aRtgPnniRfFqpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRfFqpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector of three elements that specify the quality of
service parameters for the forward direction for this connection.
This attribute is used for SPVC connections.
The cdv element specifies the acceptable peak-to-peak Cell Delay
Variation (CDV) of real-time connections (CBR, and rt-VBR). It is
signalled through the extended QoS information element.
The ctd specifies the acceptable maximum Cell Transfer Delay
(maxCtd) of real-time connections (CBR, and rt-VBR).
It is signalled through the end to end transit delay information
element.
The clr specifies the acceptable Cell Loss Ratio (CLR) of CBR, rt-
VBR, and nrt-VBR connections. It is signalled through the extended
QoS information element."
::= { aRtgPnniRf 390 }
aRtgPnniRfFqpEntry OBJECT-TYPE
SYNTAX ARtgPnniRfFqpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniRfFqpTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniRfIndex,
aRtgPnniRfFqpIndex }
::= { aRtgPnniRfFqpTable 1 }
ARtgPnniRfFqpEntry ::= SEQUENCE {
aRtgPnniRfFqpIndex
INTEGER,
aRtgPnniRfFqpValue
Unsigned32 }
aRtgPnniRfFqpIndex OBJECT-TYPE
SYNTAX INTEGER {
cdv(0),
ctd(1),
clr(2) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the aRtgPnniRfFqpTable
specific index for the aRtgPnniRfFqpTable."
::= { aRtgPnniRfFqpEntry 1 }
aRtgPnniRfFqpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
aRtgPnniRfFqpTable."
::= { aRtgPnniRfFqpEntry 2 }
aRtgPnniRfBqpTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniRfBqpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector of three elements that specify the quality of
service parameters for the backward direction for this connection.
This attribute is used for SPVC connections.
The cdv element specifies the acceptable peak-to-peak Cell Delay
Variation (CDV) of real-time connections (CBR, and rt-VBR).
It is signalled through the extended QoS information element.
The ctd specifies the acceptable maximum Cell Transfer Delay
(maxCtd) of real-time connections (CBR, and rt-VBR). It is
signalled through the end to end transit delay information element.
The clr specifies the acceptable Cell Loss Ratio (CLR) of CBR, rt-
VBR, and nrt-VBR connections. It is signalled through the extended
QoS information element."
::= { aRtgPnniRf 393 }
aRtgPnniRfBqpEntry OBJECT-TYPE
SYNTAX ARtgPnniRfBqpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniRfBqpTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniRfIndex,
aRtgPnniRfBqpIndex }
::= { aRtgPnniRfBqpTable 1 }
ARtgPnniRfBqpEntry ::= SEQUENCE {
aRtgPnniRfBqpIndex
INTEGER,
aRtgPnniRfBqpValue
Unsigned32 }
aRtgPnniRfBqpIndex OBJECT-TYPE
SYNTAX INTEGER {
cdv(0),
ctd(1),
clr(2) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the aRtgPnniRfBqpTable
specific index for the aRtgPnniRfBqpTable."
::= { aRtgPnniRfBqpEntry 1 }
aRtgPnniRfBqpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
aRtgPnniRfBqpTable."
::= { aRtgPnniRfBqpEntry 2 }
aRtgPnniCfgNode OBJECT IDENTIFIER ::= { aRtgPnni 3 }
aRtgPnniCfgNodeRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
aRtgPnniCfgNode components."
::= { aRtgPnniCfgNode 1 }
aRtgPnniCfgNodeRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniCfgNode component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex }
::= { aRtgPnniCfgNodeRowStatusTable 1 }
ARtgPnniCfgNodeRowStatusEntry ::= SEQUENCE {
aRtgPnniCfgNodeRowStatus
RowStatus,
aRtgPnniCfgNodeComponentName
DisplayString,
aRtgPnniCfgNodeStorageType
StorageType,
aRtgPnniCfgNodeIndex
Integer32 }
aRtgPnniCfgNodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniCfgNode components.
These components can be added and deleted."
::= { aRtgPnniCfgNodeRowStatusEntry 1 }
aRtgPnniCfgNodeComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniCfgNodeRowStatusEntry 2 }
aRtgPnniCfgNodeStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniCfgNode tables."
::= { aRtgPnniCfgNodeRowStatusEntry 4 }
aRtgPnniCfgNodeIndex OBJECT-TYPE
SYNTAX Integer32 (0..104)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniCfgNode tables."
::= { aRtgPnniCfgNodeRowStatusEntry 10 }
aRtgPnniCfgNodeProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of a
ConfiguredNode component."
::= { aRtgPnniCfgNode 10 }
aRtgPnniCfgNodeProvEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeProvTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex }
::= { aRtgPnniCfgNodeProvTable 1 }
ARtgPnniCfgNodeProvEntry ::= SEQUENCE {
aRtgPnniCfgNodeNodeId
HexString,
aRtgPnniCfgNodePeerGroupId
HexString }
aRtgPnniCfgNodeNodeId OBJECT-TYPE
SYNTAX HexString (SIZE (0..22))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the node id of the configured node. If this
attribute is set to null, then the node id is computed as follows:
If this is the lowest configured node, then the node id is computed
as the level (one octet), followed by the integer value 160 (one
octet), followed by the node address (20 octets).
If this is not the lowest configured node, then the node id is
computed as the level (one octet), followed by the 14 octet peer
group id of the child peer group which the LGN represents,
followed by the ESI specified in the node address (6 octets),
followed by the integer value 0 (one octet)."
::= { aRtgPnniCfgNodeProvEntry 2 }
aRtgPnniCfgNodePeerGroupId OBJECT-TYPE
SYNTAX HexString (SIZE (0..14))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows the peer group id of the Logical Group Node
(LGN) to be set. The peer group id is specified by 28 hex digits
where the first octet represents the level of the node and the
remaining 13 octets form the End System Address. If this attribute
is set to the null string then the peer group id is computed as
follows:
The peer group id for a lowest level node is computed to be the
node's level (one octet), followed by the first <level> bits of the
node's address, followed by zero or more padding 0 bits.
The peer group id for an LGN is computed to be the LGN's level
(one octet), followed by the first <level> bits of the id of the peer
group which this LGN represents."
::= { aRtgPnniCfgNodeProvEntry 3 }
aRtgPnniCfgNodeOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the generic operational attributes of a
ConfiguredNode component."
::= { aRtgPnniCfgNode 11 }
aRtgPnniCfgNodeOperEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex }
::= { aRtgPnniCfgNodeOperTable 1 }
ARtgPnniCfgNodeOperEntry ::= SEQUENCE {
aRtgPnniCfgNodeNodeAddress
HexString,
aRtgPnniCfgNodeOpNodeId
HexString,
aRtgPnniCfgNodeOpPeerGroupId
HexString,
aRtgPnniCfgNodeNumNeighbors
Unsigned32,
aRtgPnniCfgNodeNumRccs
Unsigned32,
aRtgPnniCfgNodeCurrentLeadershipPriority
Unsigned32,
aRtgPnniCfgNodePglElectionState
INTEGER }
aRtgPnniCfgNodeNodeAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the address of the node at this level.
At the lowest level, the nodeAddress is determined by the value of
the nodeAddressPrefix attribute for the ARtg Pnni component
followed by the level of this CfgNode.
For LGNs, the nodeAddress is the same as the nodeAddress of the
node at the lowest level, with the selector field set to the level of the
peer group containing the LGN."
::= { aRtgPnniCfgNodeOperEntry 1 }
aRtgPnniCfgNodeOpNodeId OBJECT-TYPE
SYNTAX HexString (SIZE (22))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the node id of the node at this level. The
default node id is computed as follows:
If this is the lowest level node, then the default node id is computed
as the level (one octet), followed by the integer value 160 (one
octet), followed by the node address (20 octets).
If this is not the lowest level node, then the default node id is
computed as the level (one octet), followed by the 14 octet peer
group id of the child peer group which the LGN represents,
followed by the ESI specified in the node address (6 octets),
followed by the integer value 0 (one octet)."
::= { aRtgPnniCfgNodeOperEntry 2 }
aRtgPnniCfgNodeOpPeerGroupId OBJECT-TYPE
SYNTAX HexString (SIZE (14))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peer group id of the node at this level.
The value is determined by the provisioned peerGroupId attribute."
::= { aRtgPnniCfgNodeOperEntry 3 }
aRtgPnniCfgNodeNumNeighbors OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of PNNI nodes which are
neighbors of this node at this level."
::= { aRtgPnniCfgNodeOperEntry 4 }
aRtgPnniCfgNodeNumRccs OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of Routing Control Channels to
this node's neighbors at this level."
::= { aRtgPnniCfgNodeOperEntry 5 }
aRtgPnniCfgNodeCurrentLeadershipPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..205)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the leadership priority of the node that this
node believes should be the peer group leader at this point in time."
::= { aRtgPnniCfgNodeOperEntry 6 }
aRtgPnniCfgNodePglElectionState OBJECT-TYPE
SYNTAX INTEGER {
starting(0),
awaiting(1),
awaitingFull(2),
initialDelay(3),
calculating(4),
operNotPgl(5),
operPgl(6),
awaitUnanimity(7),
hungElection(8),
awaitReElection(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the current state of the peer group leader
election process. The following are the possible values for this
attribute:
starting: the initial state of the state machine.
awaiting: the node has started the Hello Finite State Machine on at
least one link, and no peer has been found yet.
awaitingFull: no database synchronization process has been
completed yet but at least one neighboring peer has been found.
initialDelay: Database synchronization has been completed with at
least one neighboring peer. The node must wait pglInitTime second
before it can select and advertise its preferred Peer Group Leader
(PGL).
calculating: the node is in the process of calculating what its new
choice for preferred PGL will be.
operNotPgl: a non PGL node is in the process of determining which
node has the highest priority to be PGL by examining PTSEs sent
by other nodes.
operPgl: a PGL node is in the process of determining if another
node has a higher priority than itself by examining PTSEs sent by
other nodes.
awaitUnanimity: the node has chosen itself as PGL. If the node has
been elected unanimously, it generates a Unanimity event. It waits
for unanimity or expiration of the overrideDelay timer before
declaring itself peer group leader.
hungElection: the node has chosen itself as PGL with less than 2/3
of the other nodes advertising it as their preferred PGL. In this case
either this node should change its choice of preferred PGL, or the
other nodes are going to accept it as PGL.
awaitReElection: the node has lost connectivity to the current PGL.
The connectivity must be reestablished before the
reElectionInterval timer fires, otherwise the election is redone."
::= { aRtgPnniCfgNodeOperEntry 7 }
aRtgPnniCfgNodeSAddr OBJECT IDENTIFIER ::= { aRtgPnniCfgNode 2 }
aRtgPnniCfgNodeSAddrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeSAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
aRtgPnniCfgNodeSAddr components."
::= { aRtgPnniCfgNodeSAddr 1 }
aRtgPnniCfgNodeSAddrRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeSAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniCfgNodeSAddr component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeSAddrAddressIndex,
aRtgPnniCfgNodeSAddrPrefixLengthIndex,
aRtgPnniCfgNodeSAddrReachabilityIndex }
::= { aRtgPnniCfgNodeSAddrRowStatusTable 1 }
ARtgPnniCfgNodeSAddrRowStatusEntry ::= SEQUENCE {
aRtgPnniCfgNodeSAddrRowStatus
RowStatus,
aRtgPnniCfgNodeSAddrComponentName
DisplayString,
aRtgPnniCfgNodeSAddrStorageType
StorageType,
aRtgPnniCfgNodeSAddrAddressIndex
HexString,
aRtgPnniCfgNodeSAddrPrefixLengthIndex
Integer32,
aRtgPnniCfgNodeSAddrReachabilityIndex
INTEGER }
aRtgPnniCfgNodeSAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniCfgNodeSAddr components.
These components can be added and deleted."
::= { aRtgPnniCfgNodeSAddrRowStatusEntry 1 }
aRtgPnniCfgNodeSAddrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniCfgNodeSAddrRowStatusEntry 2 }
aRtgPnniCfgNodeSAddrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniCfgNodeSAddr tables."
::= { aRtgPnniCfgNodeSAddrRowStatusEntry 4 }
aRtgPnniCfgNodeSAddrAddressIndex OBJECT-TYPE
SYNTAX HexString (SIZE (19))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the aRtgPnniCfgNodeSAddr tables."
::= { aRtgPnniCfgNodeSAddrRowStatusEntry 10 }
aRtgPnniCfgNodeSAddrPrefixLengthIndex OBJECT-TYPE
SYNTAX Integer32 (1..152)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the aRtgPnniCfgNodeSAddr tables."
::= { aRtgPnniCfgNodeSAddrRowStatusEntry 11 }
aRtgPnniCfgNodeSAddrReachabilityIndex OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the aRtgPnniCfgNodeSAddr tables."
::= { aRtgPnniCfgNodeSAddrRowStatusEntry 12 }
aRtgPnniCfgNodeSAddrProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeSAddrProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of a
SummaryAddress component.
A summary address is an abbreviation of a set of addresses,
represented by an address prefix that all of the summarized
addresses have in common.
A suppressed summary address is used to suppress the
advertisement of addresses which match this prefix, regardless of
scope."
::= { aRtgPnniCfgNodeSAddr 10 }
aRtgPnniCfgNodeSAddrProvEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeSAddrProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeSAddrProvTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeSAddrAddressIndex,
aRtgPnniCfgNodeSAddrPrefixLengthIndex,
aRtgPnniCfgNodeSAddrReachabilityIndex }
::= { aRtgPnniCfgNodeSAddrProvTable 1 }
ARtgPnniCfgNodeSAddrProvEntry ::= SEQUENCE {
aRtgPnniCfgNodeSAddrSuppress
INTEGER }
aRtgPnniCfgNodeSAddrSuppress OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether or not the address should be
suppressed. If this attribute is set to true, then all addresses
matching that prefix will not be advertised above this level."
DEFVAL { false }
::= { aRtgPnniCfgNodeSAddrProvEntry 2 }
aRtgPnniCfgNodeSAddrOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeSAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational attributes of a SummaryAddress
component."
::= { aRtgPnniCfgNodeSAddr 11 }
aRtgPnniCfgNodeSAddrOperEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeSAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeSAddrOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeSAddrAddressIndex,
aRtgPnniCfgNodeSAddrPrefixLengthIndex,
aRtgPnniCfgNodeSAddrReachabilityIndex }
::= { aRtgPnniCfgNodeSAddrOperTable 1 }
ARtgPnniCfgNodeSAddrOperEntry ::= SEQUENCE {
aRtgPnniCfgNodeSAddrState
INTEGER,
aRtgPnniCfgNodeSAddrScope
INTEGER }
aRtgPnniCfgNodeSAddrState OBJECT-TYPE
SYNTAX INTEGER {
advertising(0),
suppressing(1),
inactive(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the address: one of advertising,
suppressing or inactive.
inactive: the summary address has been configured but is not
suppressing or summarizing any ATM addresses.
suppressing: the summary address has suppressed at least one ATM
address on the node.
advertising: the summary address is summarizing at least one ATM
address on the node."
::= { aRtgPnniCfgNodeSAddrOperEntry 1 }
aRtgPnniCfgNodeSAddrScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the scope of the summary address. The
scope corresponds to the scope of the underlying summarized
address with the highest advertised scope. A value of -1 means the
scope is unknown."
::= { aRtgPnniCfgNodeSAddrOperEntry 2 }
aRtgPnniCfgNodeNbr OBJECT IDENTIFIER ::= { aRtgPnniCfgNode 3 }
aRtgPnniCfgNodeNbrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeNbrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgPnniCfgNodeNbr components."
::= { aRtgPnniCfgNodeNbr 1 }
aRtgPnniCfgNodeNbrRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeNbrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniCfgNodeNbr component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeNbrIndex }
::= { aRtgPnniCfgNodeNbrRowStatusTable 1 }
ARtgPnniCfgNodeNbrRowStatusEntry ::= SEQUENCE {
aRtgPnniCfgNodeNbrRowStatus
RowStatus,
aRtgPnniCfgNodeNbrComponentName
DisplayString,
aRtgPnniCfgNodeNbrStorageType
StorageType,
aRtgPnniCfgNodeNbrIndex
HexString }
aRtgPnniCfgNodeNbrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniCfgNodeNbr components.
These components cannot be added nor deleted."
::= { aRtgPnniCfgNodeNbrRowStatusEntry 1 }
aRtgPnniCfgNodeNbrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniCfgNodeNbrRowStatusEntry 2 }
aRtgPnniCfgNodeNbrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniCfgNodeNbr tables."
::= { aRtgPnniCfgNodeNbrRowStatusEntry 4 }
aRtgPnniCfgNodeNbrIndex OBJECT-TYPE
SYNTAX HexString (SIZE (22))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniCfgNodeNbr tables."
::= { aRtgPnniCfgNodeNbrRowStatusEntry 10 }
aRtgPnniCfgNodeNbrOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeNbrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of a Neighbor
component."
::= { aRtgPnniCfgNodeNbr 10 }
aRtgPnniCfgNodeNbrOperEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeNbrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeNbrOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeNbrIndex }
::= { aRtgPnniCfgNodeNbrOperTable 1 }
ARtgPnniCfgNodeNbrOperEntry ::= SEQUENCE {
aRtgPnniCfgNodeNbrPeerState
INTEGER }
aRtgPnniCfgNodeNbrPeerState OBJECT-TYPE
SYNTAX INTEGER {
npDown(0),
negotiating(1),
exchanging(2),
loading(3),
full(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the routing database exchange
with the peer node.
npDown: there are no active links (i.e. in the twoWayInside Hello
state) to the neighboring peer.
negotiating: the first step in creating an adjacency between the two
neighboring peers; this step determines which node is the master,
and what the initial DS sequence number will be.
exchanging: the node describes its topology database by sending
Database Summary packets to the neighboring peer.
loading: a full sequence of Database Summary packets has been
exchanged with the neighboring peer, and the required PTSEs are
requested and at least one has not yet been received.
full: All PTSEs known to be available have been received from the
neighboring peer. At this point the all ports leading to the neighbor
node will be flooded in PTSEs within the peer group."
::= { aRtgPnniCfgNodeNbrOperEntry 2 }
aRtgPnniCfgNodeNbrStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeNbrStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the statistical operational attributes of a
Neighbor component."
::= { aRtgPnniCfgNodeNbr 11 }
aRtgPnniCfgNodeNbrStatsEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeNbrStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeNbrStatsTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeNbrIndex }
::= { aRtgPnniCfgNodeNbrStatsTable 1 }
ARtgPnniCfgNodeNbrStatsEntry ::= SEQUENCE {
aRtgPnniCfgNodeNbrPtspRx
Counter32,
aRtgPnniCfgNodeNbrPtspTx
Counter32,
aRtgPnniCfgNodeNbrPtseRx
Counter32,
aRtgPnniCfgNodeNbrPtseTx
Counter32,
aRtgPnniCfgNodeNbrPtseReqRx
Counter32,
aRtgPnniCfgNodeNbrPtseReqTx
Counter32,
aRtgPnniCfgNodeNbrPtseAcksRx
Counter32,
aRtgPnniCfgNodeNbrPtseAcksTx
Counter32,
aRtgPnniCfgNodeNbrDbSummariesRx
Counter32,
aRtgPnniCfgNodeNbrDbSummariesTx
Counter32,
aRtgPnniCfgNodeNbrBadPtspRx
Counter32,
aRtgPnniCfgNodeNbrBadPtseRx
Counter32,
aRtgPnniCfgNodeNbrBadPtseReqRx
Counter32,
aRtgPnniCfgNodeNbrBadPtseAckRx
Counter32,
aRtgPnniCfgNodeNbrBadDbSummariesRx
Counter32 }
aRtgPnniCfgNodeNbrPtspRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the PNNI Topology State Packets received
from the neighbor node. The counter wraps when it exceeds the
maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 1 }
aRtgPnniCfgNodeNbrPtspTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSPs send to the
neighbor node.The counter wraps when it exceeds the maximum
value."
::= { aRtgPnniCfgNodeNbrStatsEntry 2 }
aRtgPnniCfgNodeNbrPtseRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSEs received from the
neighbor node. The counter wraps when it exceeds the maximum
value."
::= { aRtgPnniCfgNodeNbrStatsEntry 3 }
aRtgPnniCfgNodeNbrPtseTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSEs sent to the neighbor
node. The counter wraps when it exceeds the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 4 }
aRtgPnniCfgNodeNbrPtseReqRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSE requests received
from the neighbor node. The counter wraps when it exceeds the
maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 5 }
aRtgPnniCfgNodeNbrPtseReqTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSE requests sent to the
neighbor node. The counter wraps when it exceeds the maximum
value."
::= { aRtgPnniCfgNodeNbrStatsEntry 6 }
aRtgPnniCfgNodeNbrPtseAcksRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSE acknowledgments
received from the neighbor node. The counter wraps when it
exceeds the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 7 }
aRtgPnniCfgNodeNbrPtseAcksTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of PTSE acknowledgments
sent to the neighbor node. The counter wraps when it exceeds the
maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 8 }
aRtgPnniCfgNodeNbrDbSummariesRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of database summary packets
received from the neighbor. The counter wraps when it exceeds the
maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 9 }
aRtgPnniCfgNodeNbrDbSummariesTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of database summary packets
transmitted to the neighbor. The counter wraps when it exceeds the
maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 10 }
aRtgPnniCfgNodeNbrBadPtspRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of invalid PTSP packets
received from the neighbor node. The counter wraps when it
exceeds the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 11 }
aRtgPnniCfgNodeNbrBadPtseRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of invalid PTSE packets
received to the neighbor node. The counter wraps when it exceeds
the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 12 }
aRtgPnniCfgNodeNbrBadPtseReqRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of invalid PTSE requests
received from the neighbor node. The counter wraps when it
exceeds the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 13 }
aRtgPnniCfgNodeNbrBadPtseAckRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of invalid PTSE
acknowledgments received from the neighbor node. The counter
wraps when it exceeds the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 14 }
aRtgPnniCfgNodeNbrBadDbSummariesRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of invalid database summary
packets received from the neighbor. The counter wraps when it
exceeds the maximum value."
::= { aRtgPnniCfgNodeNbrStatsEntry 15 }
aRtgPnniCfgNodeNbrRccListTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeNbrRccListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the component names of all Routing Control
Channels to the neighbor PNNI node."
::= { aRtgPnniCfgNodeNbr 385 }
aRtgPnniCfgNodeNbrRccListEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeNbrRccListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeNbrRccListTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeNbrIndex,
aRtgPnniCfgNodeNbrRccListValue }
::= { aRtgPnniCfgNodeNbrRccListTable 1 }
ARtgPnniCfgNodeNbrRccListEntry ::= SEQUENCE {
aRtgPnniCfgNodeNbrRccListValue
RowPointer }
aRtgPnniCfgNodeNbrRccListValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
aRtgPnniCfgNodeNbrRccListTable."
::= { aRtgPnniCfgNodeNbrRccListEntry 1 }
aRtgPnniCfgNodeDefSAddr OBJECT IDENTIFIER ::= { aRtgPnniCfgNode 4 }
aRtgPnniCfgNodeDefSAddrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeDefSAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
aRtgPnniCfgNodeDefSAddr components."
::= { aRtgPnniCfgNodeDefSAddr 1 }
aRtgPnniCfgNodeDefSAddrRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeDefSAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniCfgNodeDefSAddr component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeDefSAddrIndex }
::= { aRtgPnniCfgNodeDefSAddrRowStatusTable 1 }
ARtgPnniCfgNodeDefSAddrRowStatusEntry ::= SEQUENCE {
aRtgPnniCfgNodeDefSAddrRowStatus
RowStatus,
aRtgPnniCfgNodeDefSAddrComponentName
DisplayString,
aRtgPnniCfgNodeDefSAddrStorageType
StorageType,
aRtgPnniCfgNodeDefSAddrIndex
NonReplicated }
aRtgPnniCfgNodeDefSAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniCfgNodeDefSAddr components.
These components cannot be added nor deleted."
::= { aRtgPnniCfgNodeDefSAddrRowStatusEntry 1 }
aRtgPnniCfgNodeDefSAddrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniCfgNodeDefSAddrRowStatusEntry 2 }
aRtgPnniCfgNodeDefSAddrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniCfgNodeDefSAddr tables."
::= { aRtgPnniCfgNodeDefSAddrRowStatusEntry 4 }
aRtgPnniCfgNodeDefSAddrIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniCfgNodeDefSAddr tables."
::= { aRtgPnniCfgNodeDefSAddrRowStatusEntry 10 }
aRtgPnniCfgNodeDefSAddrDefAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeDefSAddrDefAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational attributes of a
DefSummaryAddress component."
::= { aRtgPnniCfgNodeDefSAddr 10 }
aRtgPnniCfgNodeDefSAddrDefAddrEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeDefSAddrDefAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeDefSAddrDefAddrTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeDefSAddrIndex }
::= { aRtgPnniCfgNodeDefSAddrDefAddrTable 1 }
ARtgPnniCfgNodeDefSAddrDefAddrEntry ::= SEQUENCE {
aRtgPnniCfgNodeDefSAddrAddress
HexString }
aRtgPnniCfgNodeDefSAddrAddress OBJECT-TYPE
SYNTAX HexString (SIZE (13))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the default summary address of the node at
this level."
::= { aRtgPnniCfgNodeDefSAddrDefAddrEntry 1 }
aRtgPnniCfgNodeDefSAddrOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniCfgNodeDefSAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational attributes of a SummaryAddress
component."
::= { aRtgPnniCfgNodeDefSAddr 11 }
aRtgPnniCfgNodeDefSAddrOperEntry OBJECT-TYPE
SYNTAX ARtgPnniCfgNodeDefSAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniCfgNodeDefSAddrOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniCfgNodeIndex,
aRtgPnniCfgNodeDefSAddrIndex }
::= { aRtgPnniCfgNodeDefSAddrOperTable 1 }
ARtgPnniCfgNodeDefSAddrOperEntry ::= SEQUENCE {
aRtgPnniCfgNodeDefSAddrState
INTEGER,
aRtgPnniCfgNodeDefSAddrScope
INTEGER }
aRtgPnniCfgNodeDefSAddrState OBJECT-TYPE
SYNTAX INTEGER {
advertising(0),
suppressing(1),
inactive(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the address: one of advertising,
suppressing or inactive.
inactive: the summary address has been configured but is not
suppressing or summarizing any ATM addresses.
suppressing: the summary address has suppressed at least one ATM
address on the node.
advertising: the summary address is summarizing at least one ATM
address on the node."
::= { aRtgPnniCfgNodeDefSAddrOperEntry 1 }
aRtgPnniCfgNodeDefSAddrScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the scope of the summary address. The
scope corresponds to the scope of the underlying summarized
address with the highest advertised scope. A value of -1 means the
scope is unknown."
::= { aRtgPnniCfgNodeDefSAddrOperEntry 2 }
aRtgPnniTop OBJECT IDENTIFIER ::= { aRtgPnni 4 }
aRtgPnniTopRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgPnniTop components."
::= { aRtgPnniTop 1 }
aRtgPnniTopRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniTopRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniTop component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex }
::= { aRtgPnniTopRowStatusTable 1 }
ARtgPnniTopRowStatusEntry ::= SEQUENCE {
aRtgPnniTopRowStatus
RowStatus,
aRtgPnniTopComponentName
DisplayString,
aRtgPnniTopStorageType
StorageType,
aRtgPnniTopIndex
Integer32 }
aRtgPnniTopRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniTop components.
These components cannot be added nor deleted."
::= { aRtgPnniTopRowStatusEntry 1 }
aRtgPnniTopComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniTopRowStatusEntry 2 }
aRtgPnniTopStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniTop tables."
::= { aRtgPnniTopRowStatusEntry 4 }
aRtgPnniTopIndex OBJECT-TYPE
SYNTAX Integer32 (0..104)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniTop tables."
::= { aRtgPnniTopRowStatusEntry 10 }
aRtgPnniTopOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of a Topology
component."
::= { aRtgPnniTop 10 }
aRtgPnniTopOperEntry OBJECT-TYPE
SYNTAX ARtgPnniTopOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniTopOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex }
::= { aRtgPnniTopOperTable 1 }
ARtgPnniTopOperEntry ::= SEQUENCE {
aRtgPnniTopPtsesInDatabase
Gauge32,
aRtgPnniTopPglNodeId
HexString,
aRtgPnniTopActiveParentNodeId
HexString,
aRtgPnniTopPreferredPglNodeId
HexString }
aRtgPnniTopPtsesInDatabase OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of PTSEs in storage in this
node's topology database for this level."
::= { aRtgPnniTopOperEntry 1 }
aRtgPnniTopPglNodeId OBJECT-TYPE
SYNTAX HexString (SIZE (0..22))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the node id of the peer group leader. If this
attribute is empty, it indicates the Peer Group Level node id is
unknown."
::= { aRtgPnniTopOperEntry 2 }
aRtgPnniTopActiveParentNodeId OBJECT-TYPE
SYNTAX HexString (SIZE (0..22))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the node identifier being used by the LGN
representing this peer group at the next higher level peer group."
::= { aRtgPnniTopOperEntry 3 }
aRtgPnniTopPreferredPglNodeId OBJECT-TYPE
SYNTAX HexString (SIZE (0..22))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the node in database with the highest Peer
Group Level (PGL) priority. If this attribute is empty, it indicates
the preferred PGL node id is unknown."
::= { aRtgPnniTopOperEntry 4 }
aRtgPnniTopNode OBJECT IDENTIFIER ::= { aRtgPnniTop 2 }
aRtgPnniTopNodeRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopNodeRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgPnniTopNode components."
::= { aRtgPnniTopNode 1 }
aRtgPnniTopNodeRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniTopNodeRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniTopNode component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex,
aRtgPnniTopNodeIndex }
::= { aRtgPnniTopNodeRowStatusTable 1 }
ARtgPnniTopNodeRowStatusEntry ::= SEQUENCE {
aRtgPnniTopNodeRowStatus
RowStatus,
aRtgPnniTopNodeComponentName
DisplayString,
aRtgPnniTopNodeStorageType
StorageType,
aRtgPnniTopNodeIndex
HexString }
aRtgPnniTopNodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniTopNode components.
These components cannot be added nor deleted."
::= { aRtgPnniTopNodeRowStatusEntry 1 }
aRtgPnniTopNodeComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniTopNodeRowStatusEntry 2 }
aRtgPnniTopNodeStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniTopNode tables."
::= { aRtgPnniTopNodeRowStatusEntry 4 }
aRtgPnniTopNodeIndex OBJECT-TYPE
SYNTAX HexString (SIZE (22))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniTopNode tables."
::= { aRtgPnniTopNodeRowStatusEntry 10 }
aRtgPnniTopNodeAddr OBJECT IDENTIFIER ::= { aRtgPnniTopNode 2 }
aRtgPnniTopNodeAddrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopNodeAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgPnniTopNodeAddr components."
::= { aRtgPnniTopNodeAddr 1 }
aRtgPnniTopNodeAddrRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniTopNodeAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniTopNodeAddr component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex,
aRtgPnniTopNodeIndex,
aRtgPnniTopNodeAddrAddressIndex,
aRtgPnniTopNodeAddrPrefixLengthIndex,
aRtgPnniTopNodeAddrReachabilityIndex }
::= { aRtgPnniTopNodeAddrRowStatusTable 1 }
ARtgPnniTopNodeAddrRowStatusEntry ::= SEQUENCE {
aRtgPnniTopNodeAddrRowStatus
RowStatus,
aRtgPnniTopNodeAddrComponentName
DisplayString,
aRtgPnniTopNodeAddrStorageType
StorageType,
aRtgPnniTopNodeAddrAddressIndex
HexString,
aRtgPnniTopNodeAddrPrefixLengthIndex
Integer32,
aRtgPnniTopNodeAddrReachabilityIndex
INTEGER }
aRtgPnniTopNodeAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniTopNodeAddr components.
These components cannot be added nor deleted."
::= { aRtgPnniTopNodeAddrRowStatusEntry 1 }
aRtgPnniTopNodeAddrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniTopNodeAddrRowStatusEntry 2 }
aRtgPnniTopNodeAddrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniTopNodeAddr tables."
::= { aRtgPnniTopNodeAddrRowStatusEntry 4 }
aRtgPnniTopNodeAddrAddressIndex OBJECT-TYPE
SYNTAX HexString (SIZE (19))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the aRtgPnniTopNodeAddr tables."
::= { aRtgPnniTopNodeAddrRowStatusEntry 10 }
aRtgPnniTopNodeAddrPrefixLengthIndex OBJECT-TYPE
SYNTAX Integer32 (1..152)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the aRtgPnniTopNodeAddr tables."
::= { aRtgPnniTopNodeAddrRowStatusEntry 11 }
aRtgPnniTopNodeAddrReachabilityIndex OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the aRtgPnniTopNodeAddr tables."
::= { aRtgPnniTopNodeAddrRowStatusEntry 12 }
aRtgPnniTopNodeAddrOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopNodeAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute group contains the operational attributes for the
Address component."
::= { aRtgPnniTopNodeAddr 10 }
aRtgPnniTopNodeAddrOperEntry OBJECT-TYPE
SYNTAX ARtgPnniTopNodeAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniTopNodeAddrOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex,
aRtgPnniTopNodeIndex,
aRtgPnniTopNodeAddrAddressIndex,
aRtgPnniTopNodeAddrPrefixLengthIndex,
aRtgPnniTopNodeAddrReachabilityIndex }
::= { aRtgPnniTopNodeAddrOperTable 1 }
ARtgPnniTopNodeAddrOperEntry ::= SEQUENCE {
aRtgPnniTopNodeAddrScope
Unsigned32 }
aRtgPnniTopNodeAddrScope OBJECT-TYPE
SYNTAX Unsigned32 (0..104)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy."
::= { aRtgPnniTopNodeAddrOperEntry 1 }
aRtgPnniTopNodeLink OBJECT IDENTIFIER ::= { aRtgPnniTopNode 3 }
aRtgPnniTopNodeLinkRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopNodeLinkRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgPnniTopNodeLink components."
::= { aRtgPnniTopNodeLink 1 }
aRtgPnniTopNodeLinkRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniTopNodeLinkRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniTopNodeLink component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex,
aRtgPnniTopNodeIndex,
aRtgPnniTopNodeLinkIndex }
::= { aRtgPnniTopNodeLinkRowStatusTable 1 }
ARtgPnniTopNodeLinkRowStatusEntry ::= SEQUENCE {
aRtgPnniTopNodeLinkRowStatus
RowStatus,
aRtgPnniTopNodeLinkComponentName
DisplayString,
aRtgPnniTopNodeLinkStorageType
StorageType,
aRtgPnniTopNodeLinkIndex
Integer32 }
aRtgPnniTopNodeLinkRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniTopNodeLink components.
These components cannot be added nor deleted."
::= { aRtgPnniTopNodeLinkRowStatusEntry 1 }
aRtgPnniTopNodeLinkComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniTopNodeLinkRowStatusEntry 2 }
aRtgPnniTopNodeLinkStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniTopNodeLink tables."
::= { aRtgPnniTopNodeLinkRowStatusEntry 4 }
aRtgPnniTopNodeLinkIndex OBJECT-TYPE
SYNTAX Integer32 (0..268435455)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniTopNodeLink tables."
::= { aRtgPnniTopNodeLinkRowStatusEntry 10 }
aRtgPnniTopNodeLinkOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniTopNodeLinkOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of a Link component."
::= { aRtgPnniTopNodeLink 10 }
aRtgPnniTopNodeLinkOperEntry OBJECT-TYPE
SYNTAX ARtgPnniTopNodeLinkOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniTopNodeLinkOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniTopIndex,
aRtgPnniTopNodeIndex,
aRtgPnniTopNodeLinkIndex }
::= { aRtgPnniTopNodeLinkOperTable 1 }
ARtgPnniTopNodeLinkOperEntry ::= SEQUENCE {
aRtgPnniTopNodeLinkRemoteNodeId
HexString,
aRtgPnniTopNodeLinkRemotePortId
Unsigned32 }
aRtgPnniTopNodeLinkRemoteNodeId OBJECT-TYPE
SYNTAX HexString (SIZE (22))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the id of the node at the far end of this link."
::= { aRtgPnniTopNodeLinkOperEntry 1 }
aRtgPnniTopNodeLinkRemotePortId OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the node's port id at the far end of this link."
::= { aRtgPnniTopNodeLinkOperEntry 2 }
aRtgPnniPort OBJECT IDENTIFIER ::= { aRtgPnni 5 }
aRtgPnniPortRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniPortRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
aRtgPnniPort components."
::= { aRtgPnniPort 1 }
aRtgPnniPortRowStatusEntry OBJECT-TYPE
SYNTAX ARtgPnniPortRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
aRtgPnniPort component."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniPortIndex }
::= { aRtgPnniPortRowStatusTable 1 }
ARtgPnniPortRowStatusEntry ::= SEQUENCE {
aRtgPnniPortRowStatus
RowStatus,
aRtgPnniPortComponentName
DisplayString,
aRtgPnniPortStorageType
StorageType,
aRtgPnniPortIndex
Integer32 }
aRtgPnniPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
aRtgPnniPort components.
These components cannot be added nor deleted."
::= { aRtgPnniPortRowStatusEntry 1 }
aRtgPnniPortComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { aRtgPnniPortRowStatusEntry 2 }
aRtgPnniPortStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
aRtgPnniPort tables."
::= { aRtgPnniPortRowStatusEntry 4 }
aRtgPnniPortIndex OBJECT-TYPE
SYNTAX Integer32 (0..268435455)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the aRtgPnniPort tables."
::= { aRtgPnniPortRowStatusEntry 10 }
aRtgPnniPortOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF ARtgPnniPortOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes of a Port component."
::= { aRtgPnniPort 10 }
aRtgPnniPortOperEntry OBJECT-TYPE
SYNTAX ARtgPnniPortOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the aRtgPnniPortOperTable."
INDEX {
aRtgIndex,
aRtgPnniIndex,
aRtgPnniPortIndex }
::= { aRtgPnniPortOperTable 1 }
ARtgPnniPortOperEntry ::= SEQUENCE {
aRtgPnniPortStdComponentName
RowPointer }
aRtgPnniPortStdComponentName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name of the port."
::= { aRtgPnniPortOperEntry 1 }
atmCR OBJECT IDENTIFIER ::= { components 113 }
atmCRRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCRRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmCR components."
::= { atmCR 1 }
atmCRRowStatusEntry OBJECT-TYPE
SYNTAX AtmCRRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmCR component."
INDEX {
atmCRIndex }
::= { atmCRRowStatusTable 1 }
AtmCRRowStatusEntry ::= SEQUENCE {
atmCRRowStatus
RowStatus,
atmCRComponentName
DisplayString,
atmCRStorageType
StorageType,
atmCRIndex
NonReplicated }
atmCRRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmCR components.
These components can be added and deleted."
::= { atmCRRowStatusEntry 1 }
atmCRComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmCRRowStatusEntry 2 }
atmCRStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmCR tables."
::= { atmCRRowStatusEntry 4 }
atmCRIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmCR tables."
::= { atmCRRowStatusEntry 10 }
atmCRProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCRProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group represents the provisioned attributes for the
AtmCallRouter component."
::= { atmCR 10 }
atmCRProvEntry OBJECT-TYPE
SYNTAX AtmCRProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmCRProvTable."
INDEX {
atmCRIndex }
::= { atmCRProvTable 1 }
AtmCRProvEntry ::= SEQUENCE {
atmCRNodeAddress
AsciiString }
atmCRNodeAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (26))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute specifies the NSAP address prefix used for ILMI
purposes."
::= { atmCRProvEntry 1 }
atmCRStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCRStatsEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This group represents the operational attributes for the
AtmCallRouter component."
::= { atmCR 11 }
atmCRStatsEntry OBJECT-TYPE
SYNTAX AtmCRStatsEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the atmCRStatsTable."
INDEX {
atmCRIndex }
::= { atmCRStatsTable 1 }
AtmCRStatsEntry ::= SEQUENCE {
atmCRCallsRouted
Counter32,
atmCRCallsFailed
Counter32 }
atmCRCallsRouted OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute counts the total number of calls routed."
::= { atmCRStatsEntry 1 }
atmCRCallsFailed OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute specifies the number of calls that failed to route."
::= { atmCRStatsEntry 2 }
atmCRDna OBJECT IDENTIFIER ::= { atmCR 2 }
atmCRDnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCRDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
atmCRDna components."
::= { atmCRDna 1 }
atmCRDnaRowStatusEntry OBJECT-TYPE
SYNTAX AtmCRDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmCRDna component."
INDEX {
atmCRIndex,
atmCRDnaIndex }
::= { atmCRDnaRowStatusTable 1 }
AtmCRDnaRowStatusEntry ::= SEQUENCE {
atmCRDnaRowStatus
RowStatus,
atmCRDnaComponentName
DisplayString,
atmCRDnaStorageType
StorageType,
atmCRDnaIndex
AsciiStringIndex }
atmCRDnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmCRDna components.
These components cannot be added nor deleted."
::= { atmCRDnaRowStatusEntry 1 }
atmCRDnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmCRDnaRowStatusEntry 2 }
atmCRDnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmCRDna tables."
::= { atmCRDnaRowStatusEntry 4 }
atmCRDnaIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..40))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmCRDna tables."
::= { atmCRDnaRowStatusEntry 10 }
atmCRDnaDestinationNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCRDnaDestinationNameEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates which components have this address
provisioned or dynamically registered via ILMI."
::= { atmCRDna 289 }
atmCRDnaDestinationNameEntry OBJECT-TYPE
SYNTAX AtmCRDnaDestinationNameEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the atmCRDnaDestinationNameTable."
INDEX {
atmCRIndex,
atmCRDnaIndex,
atmCRDnaDestinationNameValue }
::= { atmCRDnaDestinationNameTable 1 }
AtmCRDnaDestinationNameEntry ::= SEQUENCE {
atmCRDnaDestinationNameValue
RowPointer }
atmCRDnaDestinationNameValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable represents both the value and the index for the
atmCRDnaDestinationNameTable."
::= { atmCRDnaDestinationNameEntry 1 }
atmIfVpcSrc OBJECT IDENTIFIER ::= { atmIfVpc 6 }
atmIfVpcSrcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcSrcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVpcSrc components."
::= { atmIfVpcSrc 1 }
atmIfVpcSrcRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVpcSrcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVpcSrc component."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcSrcIndex }
::= { atmIfVpcSrcRowStatusTable 1 }
AtmIfVpcSrcRowStatusEntry ::= SEQUENCE {
atmIfVpcSrcRowStatus
RowStatus,
atmIfVpcSrcComponentName
DisplayString,
atmIfVpcSrcStorageType
StorageType,
atmIfVpcSrcIndex
NonReplicated }
atmIfVpcSrcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVpcSrc components.
These components can be added and deleted."
::= { atmIfVpcSrcRowStatusEntry 1 }
atmIfVpcSrcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVpcSrcRowStatusEntry 2 }
atmIfVpcSrcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVpcSrc tables."
::= { atmIfVpcSrcRowStatusEntry 4 }
atmIfVpcSrcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVpcSrc tables."
::= { atmIfVpcSrcRowStatusEntry 10 }
atmIfVpcSrcProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcSrcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisionable attributes of the
AtmIf/n Vpc/vpi SrcPvp component."
::= { atmIfVpcSrc 10 }
atmIfVpcSrcProvEntry OBJECT-TYPE
SYNTAX AtmIfVpcSrcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVpcSrcProvTable."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcSrcIndex }
::= { atmIfVpcSrcProvTable 1 }
AtmIfVpcSrcProvEntry ::= SEQUENCE {
atmIfVpcSrcCallingAddress
HexString,
atmIfVpcSrcCalledAddress
HexString,
atmIfVpcSrcCalledVpi
Unsigned32 }
atmIfVpcSrcCallingAddress OBJECT-TYPE
SYNTAX HexString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the calling address of the soft PVP. If it is a
null string, then the calling address is the address of the current
interface (that is, where the soft PVC originates)."
DEFVAL { ''H }
::= { atmIfVpcSrcProvEntry 1 }
atmIfVpcSrcCalledAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the called (remote) address of the soft PVP."
::= { atmIfVpcSrcProvEntry 2 }
atmIfVpcSrcCalledVpi OBJECT-TYPE
SYNTAX Unsigned32 (1..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the called VPI of the soft PVP."
::= { atmIfVpcSrcProvEntry 3 }
atmIfVpcSrcOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcSrcOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes associated
with the SrcPvp or SrcPvc component."
::= { atmIfVpcSrc 11 }
atmIfVpcSrcOperEntry OBJECT-TYPE
SYNTAX AtmIfVpcSrcOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVpcSrcOperTable."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcSrcIndex }
::= { atmIfVpcSrcOperTable 1 }
AtmIfVpcSrcOperEntry ::= SEQUENCE {
atmIfVpcSrcState
INTEGER,
atmIfVpcSrcRetryCount
Counter32,
atmIfVpcSrcLastFailureCauseCode
Unsigned32,
atmIfVpcSrcLastFailureDiagCode
AsciiString }
atmIfVpcSrcState OBJECT-TYPE
SYNTAX INTEGER {
active(0),
inactive(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the soft PVP or soft PVC."
::= { atmIfVpcSrcOperEntry 1 }
atmIfVpcSrcRetryCount OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of failed attempts to set up the
soft PVP or soft PVC since the last time the connection failed."
::= { atmIfVpcSrcOperEntry 2 }
atmIfVpcSrcLastFailureCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.
The default value for this attribute is set to 0."
::= { atmIfVpcSrcOperEntry 3 }
atmIfVpcSrcLastFailureDiagCode OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to NULL."
::= { atmIfVpcSrcOperEntry 4 }
atmIfVpcRp OBJECT IDENTIFIER ::= { atmIfVpc 7 }
atmIfVpcRpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcRpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVpcRp components."
::= { atmIfVpcRp 1 }
atmIfVpcRpRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVpcRpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVpcRp component."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcRpIndex }
::= { atmIfVpcRpRowStatusTable 1 }
AtmIfVpcRpRowStatusEntry ::= SEQUENCE {
atmIfVpcRpRowStatus
RowStatus,
atmIfVpcRpComponentName
DisplayString,
atmIfVpcRpStorageType
StorageType,
atmIfVpcRpIndex
NonReplicated }
atmIfVpcRpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVpcRp components.
These components cannot be added nor deleted."
::= { atmIfVpcRpRowStatusEntry 1 }
atmIfVpcRpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVpcRpRowStatusEntry 2 }
atmIfVpcRpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVpcRp tables."
::= { atmIfVpcRpRowStatusEntry 4 }
atmIfVpcRpIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVpcRp tables."
::= { atmIfVpcRpRowStatusEntry 10 }
atmIfVpcRpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcRpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
AtmRelayPoint component."
::= { atmIfVpcRp 10 }
atmIfVpcRpOperEntry OBJECT-TYPE
SYNTAX AtmIfVpcRpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVpcRpOperTable."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcRpIndex }
::= { atmIfVpcRpOperTable 1 }
AtmIfVpcRpOperEntry ::= SEQUENCE {
atmIfVpcRpNextHop
RowPointer }
atmIfVpcRpNextHop OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute indicates the component name of the Rp component
with which this Rp component is associated."
::= { atmIfVpcRpOperEntry 1 }
atmIfVpcRpNextHopsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcRpNextHopsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name(s) of the Rp
component(s) with which this Rp component is associated. This
attribute can have more than one component name only when the
Vcc distributionType is pointToMultipoint and the callDirection is
fromLink."
::= { atmIfVpcRp 430 }
atmIfVpcRpNextHopsEntry OBJECT-TYPE
SYNTAX AtmIfVpcRpNextHopsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVpcRpNextHopsTable."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcRpIndex,
atmIfVpcRpNextHopsValue }
::= { atmIfVpcRpNextHopsTable 1 }
AtmIfVpcRpNextHopsEntry ::= SEQUENCE {
atmIfVpcRpNextHopsValue
RowPointer }
atmIfVpcRpNextHopsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
atmIfVpcRpNextHopsTable."
::= { atmIfVpcRpNextHopsEntry 1 }
atmIfVpcDst OBJECT IDENTIFIER ::= { atmIfVpc 8 }
atmIfVpcDstRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcDstRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVpcDst components."
::= { atmIfVpcDst 1 }
atmIfVpcDstRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVpcDstRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVpcDst component."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcDstIndex }
::= { atmIfVpcDstRowStatusTable 1 }
AtmIfVpcDstRowStatusEntry ::= SEQUENCE {
atmIfVpcDstRowStatus
RowStatus,
atmIfVpcDstComponentName
DisplayString,
atmIfVpcDstStorageType
StorageType,
atmIfVpcDstIndex
NonReplicated }
atmIfVpcDstRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVpcDst components.
These components cannot be added nor deleted."
::= { atmIfVpcDstRowStatusEntry 1 }
atmIfVpcDstComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVpcDstRowStatusEntry 2 }
atmIfVpcDstStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVpcDst tables."
::= { atmIfVpcDstRowStatusEntry 4 }
atmIfVpcDstIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVpcDst tables."
::= { atmIfVpcDstRowStatusEntry 10 }
atmIfVpcDstOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVpcDstOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
AtmIf/n Vpc/vpi DstPvp component."
::= { atmIfVpcDst 10 }
atmIfVpcDstOperEntry OBJECT-TYPE
SYNTAX AtmIfVpcDstOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVpcDstOperTable."
INDEX {
atmIfIndex,
atmIfVpcIndex,
atmIfVpcDstIndex }
::= { atmIfVpcDstOperTable 1 }
AtmIfVpcDstOperEntry ::= SEQUENCE {
atmIfVpcDstCalledAddress
HexString,
atmIfVpcDstCallingAddress
AsciiString,
atmIfVpcDstCallingVpi
AsciiString }
atmIfVpcDstCalledAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the called address of the soft PVP."
::= { atmIfVpcDstOperEntry 1 }
atmIfVpcDstCallingAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (7..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the calling (remote) address of the soft PVP.
If the address in not known, then the value of this address is
Unknown."
::= { atmIfVpcDstOperEntry 2 }
atmIfVpcDstCallingVpi OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..7))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the calling (remote) VPI of the soft PVP. If
the VPI value is not known, the attribute value is set to Unknown."
::= { atmIfVpcDstOperEntry 3 }
atmIfVccSrc OBJECT IDENTIFIER ::= { atmIfVcc 8 }
atmIfVccSrcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccSrcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVccSrc components."
::= { atmIfVccSrc 1 }
atmIfVccSrcRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVccSrcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVccSrc component."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccSrcIndex }
::= { atmIfVccSrcRowStatusTable 1 }
AtmIfVccSrcRowStatusEntry ::= SEQUENCE {
atmIfVccSrcRowStatus
RowStatus,
atmIfVccSrcComponentName
DisplayString,
atmIfVccSrcStorageType
StorageType,
atmIfVccSrcIndex
NonReplicated }
atmIfVccSrcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVccSrc components.
These components can be added and deleted."
::= { atmIfVccSrcRowStatusEntry 1 }
atmIfVccSrcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVccSrcRowStatusEntry 2 }
atmIfVccSrcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVccSrc tables."
::= { atmIfVccSrcRowStatusEntry 4 }
atmIfVccSrcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVccSrc tables."
::= { atmIfVccSrcRowStatusEntry 10 }
atmIfVccSrcProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccSrcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisionable attributes of the
SourcePvc component."
::= { atmIfVccSrc 10 }
atmIfVccSrcProvEntry OBJECT-TYPE
SYNTAX AtmIfVccSrcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVccSrcProvTable."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccSrcIndex }
::= { atmIfVccSrcProvTable 1 }
AtmIfVccSrcProvEntry ::= SEQUENCE {
atmIfVccSrcRemoteAddress
HexString,
atmIfVccSrcRemoteVpiVci
IntegerSequence,
atmIfVccSrcCallingAddress
HexString,
atmIfVccSrcCalledAddress
HexString,
atmIfVccSrcCalledVpiVci
IntegerSequence }
atmIfVccSrcRemoteAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the remote address of the soft PVC."
::= { atmIfVccSrcProvEntry 1 }
atmIfVccSrcRemoteVpiVci OBJECT-TYPE
SYNTAX IntegerSequence (SIZE (3..9))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the remote VPI and VCI of the soft PVC."
::= { atmIfVccSrcProvEntry 2 }
atmIfVccSrcCallingAddress OBJECT-TYPE
SYNTAX HexString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the calling address of the soft PVC. If it is
a null string, then the calling address is the address of the current
interface (that is, where the soft PVC originates)."
DEFVAL { ''H }
::= { atmIfVccSrcProvEntry 3 }
atmIfVccSrcCalledAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the called (remote) address of the soft
PVC."
::= { atmIfVccSrcProvEntry 4 }
atmIfVccSrcCalledVpiVci OBJECT-TYPE
SYNTAX IntegerSequence (SIZE (3..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the remote VPI and VCI of the soft PVC."
::= { atmIfVccSrcProvEntry 5 }
atmIfVccSrcOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccSrcOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes associated
with the SrcPvp or SrcPvc component."
::= { atmIfVccSrc 11 }
atmIfVccSrcOperEntry OBJECT-TYPE
SYNTAX AtmIfVccSrcOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVccSrcOperTable."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccSrcIndex }
::= { atmIfVccSrcOperTable 1 }
AtmIfVccSrcOperEntry ::= SEQUENCE {
atmIfVccSrcState
INTEGER,
atmIfVccSrcRetryCount
Counter32,
atmIfVccSrcLastFailureCauseCode
Unsigned32,
atmIfVccSrcLastFailureDiagCode
AsciiString }
atmIfVccSrcState OBJECT-TYPE
SYNTAX INTEGER {
active(0),
inactive(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the soft PVP or soft PVC."
::= { atmIfVccSrcOperEntry 1 }
atmIfVccSrcRetryCount OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of failed attempts to set up the
soft PVP or soft PVC since the last time the connection failed."
::= { atmIfVccSrcOperEntry 2 }
atmIfVccSrcLastFailureCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.
The default value for this attribute is set to 0."
::= { atmIfVccSrcOperEntry 3 }
atmIfVccSrcLastFailureDiagCode OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to NULL."
::= { atmIfVccSrcOperEntry 4 }
atmIfVccEp OBJECT IDENTIFIER ::= { atmIfVcc 9 }
atmIfVccEpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccEpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVccEp components."
::= { atmIfVccEp 1 }
atmIfVccEpRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVccEpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVccEp component."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccEpIndex }
::= { atmIfVccEpRowStatusTable 1 }
AtmIfVccEpRowStatusEntry ::= SEQUENCE {
atmIfVccEpRowStatus
RowStatus,
atmIfVccEpComponentName
DisplayString,
atmIfVccEpStorageType
StorageType,
atmIfVccEpIndex
NonReplicated }
atmIfVccEpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVccEp components.
These components cannot be added nor deleted."
::= { atmIfVccEpRowStatusEntry 1 }
atmIfVccEpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVccEpRowStatusEntry 2 }
atmIfVccEpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVccEp tables."
::= { atmIfVccEpRowStatusEntry 4 }
atmIfVccEpIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVccEp tables."
::= { atmIfVccEpRowStatusEntry 10 }
atmIfVccEpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccEpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
AtmEndPoint component."
::= { atmIfVccEp 10 }
atmIfVccEpOperEntry OBJECT-TYPE
SYNTAX AtmIfVccEpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVccEpOperTable."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccEpIndex }
::= { atmIfVccEpOperTable 1 }
AtmIfVccEpOperEntry ::= SEQUENCE {
atmIfVccEpApplicationName
RowPointer }
atmIfVccEpApplicationName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name associated with the
application associated with the switched VCC."
::= { atmIfVccEpOperEntry 1 }
atmIfVccRp OBJECT IDENTIFIER ::= { atmIfVcc 10 }
atmIfVccRpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccRpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVccRp components."
::= { atmIfVccRp 1 }
atmIfVccRpRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVccRpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVccRp component."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccRpIndex }
::= { atmIfVccRpRowStatusTable 1 }
AtmIfVccRpRowStatusEntry ::= SEQUENCE {
atmIfVccRpRowStatus
RowStatus,
atmIfVccRpComponentName
DisplayString,
atmIfVccRpStorageType
StorageType,
atmIfVccRpIndex
NonReplicated }
atmIfVccRpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVccRp components.
These components cannot be added nor deleted."
::= { atmIfVccRpRowStatusEntry 1 }
atmIfVccRpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVccRpRowStatusEntry 2 }
atmIfVccRpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVccRp tables."
::= { atmIfVccRpRowStatusEntry 4 }
atmIfVccRpIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVccRp tables."
::= { atmIfVccRpRowStatusEntry 10 }
atmIfVccRpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccRpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
AtmRelayPoint component."
::= { atmIfVccRp 10 }
atmIfVccRpOperEntry OBJECT-TYPE
SYNTAX AtmIfVccRpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVccRpOperTable."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccRpIndex }
::= { atmIfVccRpOperTable 1 }
AtmIfVccRpOperEntry ::= SEQUENCE {
atmIfVccRpNextHop
RowPointer }
atmIfVccRpNextHop OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute indicates the component name of the Rp component
with which this Rp component is associated."
::= { atmIfVccRpOperEntry 1 }
atmIfVccRpNextHopsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccRpNextHopsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name(s) of the Rp
component(s) with which this Rp component is associated. This
attribute can have more than one component name only when the
Vcc distributionType is pointToMultipoint and the callDirection is
fromLink."
::= { atmIfVccRp 430 }
atmIfVccRpNextHopsEntry OBJECT-TYPE
SYNTAX AtmIfVccRpNextHopsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVccRpNextHopsTable."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccRpIndex,
atmIfVccRpNextHopsValue }
::= { atmIfVccRpNextHopsTable 1 }
AtmIfVccRpNextHopsEntry ::= SEQUENCE {
atmIfVccRpNextHopsValue
RowPointer }
atmIfVccRpNextHopsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
atmIfVccRpNextHopsTable."
::= { atmIfVccRpNextHopsEntry 1 }
atmIfVccDst OBJECT IDENTIFIER ::= { atmIfVcc 11 }
atmIfVccDstRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccDstRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVccDst components."
::= { atmIfVccDst 1 }
atmIfVccDstRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVccDstRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVccDst component."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccDstIndex }
::= { atmIfVccDstRowStatusTable 1 }
AtmIfVccDstRowStatusEntry ::= SEQUENCE {
atmIfVccDstRowStatus
RowStatus,
atmIfVccDstComponentName
DisplayString,
atmIfVccDstStorageType
StorageType,
atmIfVccDstIndex
NonReplicated }
atmIfVccDstRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVccDst components.
These components cannot be added nor deleted."
::= { atmIfVccDstRowStatusEntry 1 }
atmIfVccDstComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVccDstRowStatusEntry 2 }
atmIfVccDstStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVccDst tables."
::= { atmIfVccDstRowStatusEntry 4 }
atmIfVccDstIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVccDst tables."
::= { atmIfVccDstRowStatusEntry 10 }
atmIfVccDstOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVccDstOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
DestinationPvc component."
::= { atmIfVccDst 10 }
atmIfVccDstOperEntry OBJECT-TYPE
SYNTAX AtmIfVccDstOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVccDstOperTable."
INDEX {
atmIfIndex,
atmIfVccIndex,
atmIfVccDstIndex }
::= { atmIfVccDstOperTable 1 }
AtmIfVccDstOperEntry ::= SEQUENCE {
atmIfVccDstCalledAddress
HexString,
atmIfVccDstCallingAddress
AsciiString,
atmIfVccDstCallingVpiVci
AsciiString }
atmIfVccDstCalledAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the called address of the soft PVC."
::= { atmIfVccDstOperEntry 3 }
atmIfVccDstCallingAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (7..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the remote address of the soft PVC. If the
address in not known, then the value of this address is Unknown."
::= { atmIfVccDstOperEntry 4 }
atmIfVccDstCallingVpiVci OBJECT-TYPE
SYNTAX AsciiString (SIZE (7..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the remote VPI and VCI of the soft PVC. If
the VPI and VCI values are not known, this attribute is set to
Unknown."
::= { atmIfVccDstOperEntry 5 }
atmIfVptVccSrc OBJECT IDENTIFIER ::= { atmIfVptVcc 8 }
atmIfVptVccSrcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccSrcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptVccSrc components."
::= { atmIfVptVccSrc 1 }
atmIfVptVccSrcRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptVccSrcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptVccSrc component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccSrcIndex }
::= { atmIfVptVccSrcRowStatusTable 1 }
AtmIfVptVccSrcRowStatusEntry ::= SEQUENCE {
atmIfVptVccSrcRowStatus
RowStatus,
atmIfVptVccSrcComponentName
DisplayString,
atmIfVptVccSrcStorageType
StorageType,
atmIfVptVccSrcIndex
NonReplicated }
atmIfVptVccSrcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptVccSrc components.
These components can be added and deleted."
::= { atmIfVptVccSrcRowStatusEntry 1 }
atmIfVptVccSrcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptVccSrcRowStatusEntry 2 }
atmIfVptVccSrcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptVccSrc tables."
::= { atmIfVptVccSrcRowStatusEntry 4 }
atmIfVptVccSrcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptVccSrc tables."
::= { atmIfVptVccSrcRowStatusEntry 10 }
atmIfVptVccSrcProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccSrcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisionable attributes of the
SourcePvc component."
::= { atmIfVptVccSrc 10 }
atmIfVptVccSrcProvEntry OBJECT-TYPE
SYNTAX AtmIfVptVccSrcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptVccSrcProvTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccSrcIndex }
::= { atmIfVptVccSrcProvTable 1 }
AtmIfVptVccSrcProvEntry ::= SEQUENCE {
atmIfVptVccSrcRemoteAddress
HexString,
atmIfVptVccSrcRemoteVpiVci
IntegerSequence,
atmIfVptVccSrcCallingAddress
HexString,
atmIfVptVccSrcCalledAddress
HexString,
atmIfVptVccSrcCalledVpiVci
IntegerSequence }
atmIfVptVccSrcRemoteAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the remote address of the soft PVC."
::= { atmIfVptVccSrcProvEntry 1 }
atmIfVptVccSrcRemoteVpiVci OBJECT-TYPE
SYNTAX IntegerSequence (SIZE (3..9))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the remote VPI and VCI of the soft PVC."
::= { atmIfVptVccSrcProvEntry 2 }
atmIfVptVccSrcCallingAddress OBJECT-TYPE
SYNTAX HexString (SIZE (0..20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the calling address of the soft PVC. If it is
a null string, then the calling address is the address of the current
interface (that is, where the soft PVC originates)."
DEFVAL { ''H }
::= { atmIfVptVccSrcProvEntry 3 }
atmIfVptVccSrcCalledAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the called (remote) address of the soft
PVC."
::= { atmIfVptVccSrcProvEntry 4 }
atmIfVptVccSrcCalledVpiVci OBJECT-TYPE
SYNTAX IntegerSequence (SIZE (3..10))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the remote VPI and VCI of the soft PVC."
::= { atmIfVptVccSrcProvEntry 5 }
atmIfVptVccSrcOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccSrcOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes associated
with the SrcPvp or SrcPvc component."
::= { atmIfVptVccSrc 11 }
atmIfVptVccSrcOperEntry OBJECT-TYPE
SYNTAX AtmIfVptVccSrcOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptVccSrcOperTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccSrcIndex }
::= { atmIfVptVccSrcOperTable 1 }
AtmIfVptVccSrcOperEntry ::= SEQUENCE {
atmIfVptVccSrcState
INTEGER,
atmIfVptVccSrcRetryCount
Counter32,
atmIfVptVccSrcLastFailureCauseCode
Unsigned32,
atmIfVptVccSrcLastFailureDiagCode
AsciiString }
atmIfVptVccSrcState OBJECT-TYPE
SYNTAX INTEGER {
active(0),
inactive(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the soft PVP or soft PVC."
::= { atmIfVptVccSrcOperEntry 1 }
atmIfVptVccSrcRetryCount OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of failed attempts to set up the
soft PVP or soft PVC since the last time the connection failed."
::= { atmIfVptVccSrcOperEntry 2 }
atmIfVptVccSrcLastFailureCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages.
The default value for this attribute is set to 0."
::= { atmIfVptVccSrcOperEntry 3 }
atmIfVptVccSrcLastFailureDiagCode OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to NULL."
::= { atmIfVptVccSrcOperEntry 4 }
atmIfVptVccEp OBJECT IDENTIFIER ::= { atmIfVptVcc 9 }
atmIfVptVccEpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccEpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptVccEp components."
::= { atmIfVptVccEp 1 }
atmIfVptVccEpRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptVccEpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptVccEp component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccEpIndex }
::= { atmIfVptVccEpRowStatusTable 1 }
AtmIfVptVccEpRowStatusEntry ::= SEQUENCE {
atmIfVptVccEpRowStatus
RowStatus,
atmIfVptVccEpComponentName
DisplayString,
atmIfVptVccEpStorageType
StorageType,
atmIfVptVccEpIndex
NonReplicated }
atmIfVptVccEpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptVccEp components.
These components cannot be added nor deleted."
::= { atmIfVptVccEpRowStatusEntry 1 }
atmIfVptVccEpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptVccEpRowStatusEntry 2 }
atmIfVptVccEpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptVccEp tables."
::= { atmIfVptVccEpRowStatusEntry 4 }
atmIfVptVccEpIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptVccEp tables."
::= { atmIfVptVccEpRowStatusEntry 10 }
atmIfVptVccEpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccEpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
AtmEndPoint component."
::= { atmIfVptVccEp 10 }
atmIfVptVccEpOperEntry OBJECT-TYPE
SYNTAX AtmIfVptVccEpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptVccEpOperTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccEpIndex }
::= { atmIfVptVccEpOperTable 1 }
AtmIfVptVccEpOperEntry ::= SEQUENCE {
atmIfVptVccEpApplicationName
RowPointer }
atmIfVptVccEpApplicationName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name associated with the
application associated with the switched VCC."
::= { atmIfVptVccEpOperEntry 1 }
atmIfVptVccRp OBJECT IDENTIFIER ::= { atmIfVptVcc 10 }
atmIfVptVccRpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccRpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptVccRp components."
::= { atmIfVptVccRp 1 }
atmIfVptVccRpRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptVccRpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptVccRp component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccRpIndex }
::= { atmIfVptVccRpRowStatusTable 1 }
AtmIfVptVccRpRowStatusEntry ::= SEQUENCE {
atmIfVptVccRpRowStatus
RowStatus,
atmIfVptVccRpComponentName
DisplayString,
atmIfVptVccRpStorageType
StorageType,
atmIfVptVccRpIndex
NonReplicated }
atmIfVptVccRpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptVccRp components.
These components cannot be added nor deleted."
::= { atmIfVptVccRpRowStatusEntry 1 }
atmIfVptVccRpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptVccRpRowStatusEntry 2 }
atmIfVptVccRpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptVccRp tables."
::= { atmIfVptVccRpRowStatusEntry 4 }
atmIfVptVccRpIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptVccRp tables."
::= { atmIfVptVccRpRowStatusEntry 10 }
atmIfVptVccRpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccRpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
AtmRelayPoint component."
::= { atmIfVptVccRp 10 }
atmIfVptVccRpOperEntry OBJECT-TYPE
SYNTAX AtmIfVptVccRpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptVccRpOperTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccRpIndex }
::= { atmIfVptVccRpOperTable 1 }
AtmIfVptVccRpOperEntry ::= SEQUENCE {
atmIfVptVccRpNextHop
RowPointer }
atmIfVptVccRpNextHop OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute indicates the component name of the Rp component
with which this Rp component is associated."
::= { atmIfVptVccRpOperEntry 1 }
atmIfVptVccRpNextHopsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccRpNextHopsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name(s) of the Rp
component(s) with which this Rp component is associated. This
attribute can have more than one component name only when the
Vcc distributionType is pointToMultipoint and the callDirection is
fromLink."
::= { atmIfVptVccRp 430 }
atmIfVptVccRpNextHopsEntry OBJECT-TYPE
SYNTAX AtmIfVptVccRpNextHopsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptVccRpNextHopsTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccRpIndex,
atmIfVptVccRpNextHopsValue }
::= { atmIfVptVccRpNextHopsTable 1 }
AtmIfVptVccRpNextHopsEntry ::= SEQUENCE {
atmIfVptVccRpNextHopsValue
RowPointer }
atmIfVptVccRpNextHopsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
atmIfVptVccRpNextHopsTable."
::= { atmIfVptVccRpNextHopsEntry 1 }
atmIfVptVccDst OBJECT IDENTIFIER ::= { atmIfVptVcc 11 }
atmIfVptVccDstRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccDstRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptVccDst components."
::= { atmIfVptVccDst 1 }
atmIfVptVccDstRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptVccDstRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptVccDst component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccDstIndex }
::= { atmIfVptVccDstRowStatusTable 1 }
AtmIfVptVccDstRowStatusEntry ::= SEQUENCE {
atmIfVptVccDstRowStatus
RowStatus,
atmIfVptVccDstComponentName
DisplayString,
atmIfVptVccDstStorageType
StorageType,
atmIfVptVccDstIndex
NonReplicated }
atmIfVptVccDstRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptVccDst components.
These components cannot be added nor deleted."
::= { atmIfVptVccDstRowStatusEntry 1 }
atmIfVptVccDstComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptVccDstRowStatusEntry 2 }
atmIfVptVccDstStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptVccDst tables."
::= { atmIfVptVccDstRowStatusEntry 4 }
atmIfVptVccDstIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptVccDst tables."
::= { atmIfVptVccDstRowStatusEntry 10 }
atmIfVptVccDstOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptVccDstOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
DestinationPvc component."
::= { atmIfVptVccDst 10 }
atmIfVptVccDstOperEntry OBJECT-TYPE
SYNTAX AtmIfVptVccDstOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptVccDstOperTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptVccIndex,
atmIfVptVccDstIndex }
::= { atmIfVptVccDstOperTable 1 }
AtmIfVptVccDstOperEntry ::= SEQUENCE {
atmIfVptVccDstCalledAddress
HexString,
atmIfVptVccDstCallingAddress
AsciiString,
atmIfVptVccDstCallingVpiVci
AsciiString }
atmIfVptVccDstCalledAddress OBJECT-TYPE
SYNTAX HexString (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the called address of the soft PVC."
::= { atmIfVptVccDstOperEntry 3 }
atmIfVptVccDstCallingAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (7..40))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the remote address of the soft PVC. If the
address in not known, then the value of this address is Unknown."
::= { atmIfVptVccDstOperEntry 4 }
atmIfVptVccDstCallingVpiVci OBJECT-TYPE
SYNTAX AsciiString (SIZE (7..9))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the remote VPI and VCI of the soft PVC. If
the VPI and VCI values are not known, this attribute is set to
Unknown."
::= { atmIfVptVccDstOperEntry 5 }
atmNetworkingGroup OBJECT IDENTIFIER ::= { atmNetworkingMIB 1 }
atmNetworkingGroupBE OBJECT IDENTIFIER ::= { atmNetworkingGroup 5 }
atmNetworkingGroupBE01 OBJECT IDENTIFIER ::= { atmNetworkingGroupBE 2 }
atmNetworkingGroupBE01A OBJECT IDENTIFIER ::= { atmNetworkingGroupBE01 2 }
atmNetworkingCapabilities OBJECT IDENTIFIER ::= { atmNetworkingMIB 3 }
atmNetworkingCapabilitiesBE OBJECT IDENTIFIER ::= { atmNetworkingCapabilities 5 }
atmNetworkingCapabilitiesBE01 OBJECT IDENTIFIER ::= { atmNetworkingCapabilitiesBE 2 }
atmNetworkingCapabilitiesBE01A OBJECT IDENTIFIER ::= { atmNetworkingCapabilitiesBE01 2 }
END