Nortel-Magellan-Passport-AtmUniMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
DisplayString,
StorageType,
RowStatus,
Gauge32,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
Hex,
NonReplicated,
AsciiStringIndex
FROM Nortel-Magellan-Passport-TextualConventionsMIB
atmIfVptIndex,
atmIfVpt,
atmIfIndex,
atmIf
FROM Nortel-Magellan-Passport-AtmCoreMIB;
atmUniMIB OBJECT IDENTIFIER ::= { passportMIBs 69 }
atmIfUni OBJECT IDENTIFIER ::= { atmIf 6 }
atmIfUniRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUni components."
::= { atmIfUni 1 }
atmIfUniRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUni component."
INDEX {
atmIfIndex,
atmIfUniIndex }
::= { atmIfUniRowStatusTable 1 }
AtmIfUniRowStatusEntry ::= SEQUENCE {
atmIfUniRowStatus
RowStatus,
atmIfUniComponentName
DisplayString,
atmIfUniStorageType
StorageType,
atmIfUniIndex
NonReplicated }
atmIfUniRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUni components.
These components can be added and deleted."
::= { atmIfUniRowStatusEntry 1 }
atmIfUniComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniRowStatusEntry 2 }
atmIfUniStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUni tables."
::= { atmIfUniRowStatusEntry 4 }
atmIfUniIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfUni tables."
::= { atmIfUniRowStatusEntry 10 }
atmIfUniProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the Uni
component."
::= { atmIfUni 10 }
atmIfUniProvEntry OBJECT-TYPE
SYNTAX AtmIfUniProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniProvTable."
INDEX {
atmIfIndex,
atmIfUniIndex }
::= { atmIfUniProvTable 1 }
AtmIfUniProvEntry ::= SEQUENCE {
atmIfUniVersion
INTEGER,
atmIfUniSide
INTEGER,
atmIfUniSoftPvcRetryPeriod
Unsigned32,
atmIfUniSoftPvpAndPvcRetryPeriod
Unsigned32,
atmIfUniSoftPvpAndPvcHoldOffTime
Unsigned32 }
atmIfUniVersion OBJECT-TYPE
SYNTAX INTEGER {
atmForum30(0),
atmForum31(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies which specification the UNI complies with.
The options are ATM FORUM 3.0 or ATM FORUM 3.1. If this
attribute is changed then all switched Vcc components in this
interface are cleared due to the fact that the two versions are
incompatible."
DEFVAL { atmForum31 }
::= { atmIfUniProvEntry 1 }
atmIfUniSide OBJECT-TYPE
SYNTAX INTEGER {
network(0),
user(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates which side the interface is, user or network."
DEFVAL { network }
::= { atmIfUniProvEntry 2 }
atmIfUniSoftPvcRetryPeriod OBJECT-TYPE
SYNTAX Unsigned32 (20..999999)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the time in seconds to wait between call set
up retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute."
DEFVAL { 60 }
::= { atmIfUniProvEntry 3 }
atmIfUniSoftPvpAndPvcRetryPeriod OBJECT-TYPE
SYNTAX Unsigned32 (20..999999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds."
DEFVAL { 60 }
::= { atmIfUniProvEntry 4 }
atmIfUniSoftPvpAndPvcHoldOffTime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 50..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms."
DEFVAL { 0 }
::= { atmIfUniProvEntry 5 }
atmIfUniOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the Uni
component."
::= { atmIfUni 11 }
atmIfUniOperEntry OBJECT-TYPE
SYNTAX AtmIfUniOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniOperTable."
INDEX {
atmIfIndex,
atmIfUniIndex }
::= { atmIfUniOperTable 1 }
AtmIfUniOperEntry ::= SEQUENCE {
atmIfUniMacAddress
AsciiString }
atmIfUniMacAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (12))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the MAC address of the port, which is used
for address registration of the user side as the default ESI."
::= { atmIfUniOperEntry 1 }
atmIfUniAcctOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniAcctOptEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for accounting."
::= { atmIfUni 12 }
atmIfUniAcctOptEntry OBJECT-TYPE
SYNTAX AtmIfUniAcctOptEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniAcctOptTable."
INDEX {
atmIfIndex,
atmIfUniIndex }
::= { atmIfUniAcctOptTable 1 }
AtmIfUniAcctOptEntry ::= SEQUENCE {
atmIfUniAccountCollection
OCTET STRING,
atmIfUniAccountConnectionType
INTEGER,
atmIfUniAccountClass
Unsigned32,
atmIfUniServiceExchange
Unsigned32 }
atmIfUniAccountCollection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)"
::= { atmIfUniAcctOptEntry 1 }
atmIfUniAccountConnectionType OBJECT-TYPE
SYNTAX INTEGER {
origTerm(0),
intermediate(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate."
DEFVAL { origTerm }
::= { atmIfUniAcctOptEntry 2 }
atmIfUniAccountClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate."
DEFVAL { 0 }
::= { atmIfUniAcctOptEntry 3 }
atmIfUniServiceExchange OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate."
DEFVAL { 0 }
::= { atmIfUniAcctOptEntry 4 }
atmIfUniIlmi OBJECT IDENTIFIER ::= { atmIfUni 2 }
atmIfUniIlmiRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniIlmiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUniIlmi components."
::= { atmIfUniIlmi 1 }
atmIfUniIlmiRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniIlmiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUniIlmi component."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniIlmiIndex }
::= { atmIfUniIlmiRowStatusTable 1 }
AtmIfUniIlmiRowStatusEntry ::= SEQUENCE {
atmIfUniIlmiRowStatus
RowStatus,
atmIfUniIlmiComponentName
DisplayString,
atmIfUniIlmiStorageType
StorageType,
atmIfUniIlmiIndex
NonReplicated }
atmIfUniIlmiRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUniIlmi components.
These components cannot be added nor deleted."
::= { atmIfUniIlmiRowStatusEntry 1 }
atmIfUniIlmiComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniIlmiRowStatusEntry 2 }
atmIfUniIlmiStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUniIlmi tables."
::= { atmIfUniIlmiRowStatusEntry 4 }
atmIfUniIlmiIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfUniIlmi tables."
::= { atmIfUniIlmiRowStatusEntry 10 }
atmIfUniIlmiStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniIlmiStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { atmIfUniIlmi 10 }
atmIfUniIlmiStateEntry OBJECT-TYPE
SYNTAX AtmIfUniIlmiStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniIlmiStateTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniIlmiIndex }
::= { atmIfUniIlmiStateTable 1 }
AtmIfUniIlmiStateEntry ::= SEQUENCE {
atmIfUniIlmiAdminState
INTEGER,
atmIfUniIlmiOperationalState
INTEGER,
atmIfUniIlmiUsageState
INTEGER }
atmIfUniIlmiAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { atmIfUniIlmiStateEntry 1 }
atmIfUniIlmiOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { atmIfUniIlmiStateEntry 2 }
atmIfUniIlmiUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { atmIfUniIlmiStateEntry 3 }
atmIfUniIlmiProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniIlmiProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisionable attributes for the Ilmi
component."
::= { atmIfUniIlmi 11 }
atmIfUniIlmiProvEntry OBJECT-TYPE
SYNTAX AtmIfUniIlmiProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniIlmiProvTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniIlmiIndex }
::= { atmIfUniIlmiProvTable 1 }
AtmIfUniIlmiProvEntry ::= SEQUENCE {
atmIfUniIlmiVci
Unsigned32,
atmIfUniIlmiOperatingMode
INTEGER }
atmIfUniIlmiVci OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute identifies the ILMI channel number."
DEFVAL { 16 }
::= { atmIfUniIlmiProvEntry 1 }
atmIfUniIlmiOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
addressRegEnabled(0),
addressRegDisabled(1),
ilmiDisabled(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to enable/disable the ILMI protocol.
addressRegEnabled indicates that the ILMI address registration
protocol is enabled. addressRegDisabled indicates that the ILMI
address registration protocol is disabled. ilmiDisabled indicates that
all of ILMI is disabled."
DEFVAL { addressRegEnabled }
::= { atmIfUniIlmiProvEntry 2 }
atmIfUniIlmiStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniIlmiStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the statistics for the AtmIlmi
component."
::= { atmIfUniIlmi 12 }
atmIfUniIlmiStatsEntry OBJECT-TYPE
SYNTAX AtmIfUniIlmiStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniIlmiStatsTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniIlmiIndex }
::= { atmIfUniIlmiStatsTable 1 }
AtmIfUniIlmiStatsEntry ::= SEQUENCE {
atmIfUniIlmiTxPdus
Counter32,
atmIfUniIlmiRxPdus
Counter32,
atmIfUniIlmiRxBadPdusDiscarded
Counter32 }
atmIfUniIlmiTxPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of transmitted ILMI PDUs. The
counter wraps to 0 when the maximum value is exceeded."
::= { atmIfUniIlmiStatsEntry 1 }
atmIfUniIlmiRxPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of received ILMI PDUs.The
counter wraps to 0 when the maximum value is exceeded."
::= { atmIfUniIlmiStatsEntry 2 }
atmIfUniIlmiRxBadPdusDiscarded OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of received ILMI PDUs that were
discarded due to invalid SNMP format. The counter wraps to 0
when the maximum value is exceeded."
::= { atmIfUniIlmiStatsEntry 3 }
atmIfUniIlmiPrefixToRegisterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniIlmiPrefixToRegisterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a list of zero or more addresses. If the side attribute
in the Uni component is set to user, then this attribute must be
empty; if the side attribute is set to network, then this attribute is a
list of prefixes.This attribute represents a list of prefix addresses (26
digits) that are sent to the user side. If no prefixes are entered, then
the nodeAddress attribute in the AtmCallRouter component is used
for address registration."
::= { atmIfUniIlmi 287 }
atmIfUniIlmiPrefixToRegisterEntry OBJECT-TYPE
SYNTAX AtmIfUniIlmiPrefixToRegisterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniIlmiPrefixToRegisterTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniIlmiIndex,
atmIfUniIlmiPrefixToRegisterValue }
::= { atmIfUniIlmiPrefixToRegisterTable 1 }
AtmIfUniIlmiPrefixToRegisterEntry ::= SEQUENCE {
atmIfUniIlmiPrefixToRegisterValue
AsciiString,
atmIfUniIlmiPrefixToRegisterRowStatus
RowStatus }
atmIfUniIlmiPrefixToRegisterValue OBJECT-TYPE
SYNTAX AsciiString (SIZE (26))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
atmIfUniIlmiPrefixToRegisterTable."
::= { atmIfUniIlmiPrefixToRegisterEntry 1 }
atmIfUniIlmiPrefixToRegisterRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the atmIfUniIlmiPrefixToRegisterTable."
::= { atmIfUniIlmiPrefixToRegisterEntry 2 }
atmIfUniIlmiEsiToRegisterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniIlmiEsiToRegisterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a list of zero or more addresses. If the side attribute
in the Uni component is set to network, then this attribute must be
an empty list; if the side attribute is set to user, then this attribute is
a list of end system indicators (ESI) addresses (12 hex digits) that
are used to compose addresses to register with the network side."
::= { atmIfUniIlmi 288 }
atmIfUniIlmiEsiToRegisterEntry OBJECT-TYPE
SYNTAX AtmIfUniIlmiEsiToRegisterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniIlmiEsiToRegisterTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniIlmiIndex,
atmIfUniIlmiEsiToRegisterValue }
::= { atmIfUniIlmiEsiToRegisterTable 1 }
AtmIfUniIlmiEsiToRegisterEntry ::= SEQUENCE {
atmIfUniIlmiEsiToRegisterValue
AsciiString,
atmIfUniIlmiEsiToRegisterRowStatus
RowStatus }
atmIfUniIlmiEsiToRegisterValue OBJECT-TYPE
SYNTAX AsciiString (SIZE (12))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
atmIfUniIlmiEsiToRegisterTable."
::= { atmIfUniIlmiEsiToRegisterEntry 1 }
atmIfUniIlmiEsiToRegisterRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the atmIfUniIlmiEsiToRegisterTable."
::= { atmIfUniIlmiEsiToRegisterEntry 2 }
atmIfUniSig OBJECT IDENTIFIER ::= { atmIfUni 3 }
atmIfUniSigRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUniSig components."
::= { atmIfUniSig 1 }
atmIfUniSigRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniSigRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUniSig component."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex }
::= { atmIfUniSigRowStatusTable 1 }
AtmIfUniSigRowStatusEntry ::= SEQUENCE {
atmIfUniSigRowStatus
RowStatus,
atmIfUniSigComponentName
DisplayString,
atmIfUniSigStorageType
StorageType,
atmIfUniSigIndex
NonReplicated }
atmIfUniSigRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUniSig components.
These components cannot be added nor deleted."
::= { atmIfUniSigRowStatusEntry 1 }
atmIfUniSigComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniSigRowStatusEntry 2 }
atmIfUniSigStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUniSig tables."
::= { atmIfUniSigRowStatusEntry 4 }
atmIfUniSigIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfUniSig tables."
::= { atmIfUniSigRowStatusEntry 10 }
atmIfUniSigProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisionable attributes for the
Signalling component."
::= { atmIfUniSig 10 }
atmIfUniSigProvEntry OBJECT-TYPE
SYNTAX AtmIfUniSigProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniSigProvTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex }
::= { atmIfUniSigProvTable 1 }
AtmIfUniSigProvEntry ::= SEQUENCE {
atmIfUniSigVci
Unsigned32,
atmIfUniSigAddressConversion
INTEGER }
atmIfUniSigVci OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the signalling channel number."
DEFVAL { 5 }
::= { atmIfUniSigProvEntry 1 }
atmIfUniSigAddressConversion OBJECT-TYPE
SYNTAX INTEGER {
none(0),
nativeE164(1),
nsap(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed."
DEFVAL { none }
::= { atmIfUniSigProvEntry 2 }
atmIfUniSigStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { atmIfUniSig 11 }
atmIfUniSigStateEntry OBJECT-TYPE
SYNTAX AtmIfUniSigStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniSigStateTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex }
::= { atmIfUniSigStateTable 1 }
AtmIfUniSigStateEntry ::= SEQUENCE {
atmIfUniSigAdminState
INTEGER,
atmIfUniSigOperationalState
INTEGER,
atmIfUniSigUsageState
INTEGER }
atmIfUniSigAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { atmIfUniSigStateEntry 1 }
atmIfUniSigOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { atmIfUniSigStateEntry 2 }
atmIfUniSigUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { atmIfUniSigStateEntry 3 }
atmIfUniSigOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute contains the operational attributes for the
AtmSignalling component."
::= { atmIfUniSig 12 }
atmIfUniSigOperEntry OBJECT-TYPE
SYNTAX AtmIfUniSigOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniSigOperTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex }
::= { atmIfUniSigOperTable 1 }
AtmIfUniSigOperEntry ::= SEQUENCE {
atmIfUniSigLastTxCauseCode
Unsigned32,
atmIfUniSigLastTxDiagCode
Hex,
atmIfUniSigLastRxCauseCode
Unsigned32,
atmIfUniSigLastRxDiagCode
Hex }
atmIfUniSigLastTxCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages."
::= { atmIfUniSigOperEntry 1 }
atmIfUniSigLastTxDiagCode OBJECT-TYPE
SYNTAX Hex (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0."
::= { atmIfUniSigOperEntry 2 }
atmIfUniSigLastRxCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages."
::= { atmIfUniSigOperEntry 3 }
atmIfUniSigLastRxDiagCode OBJECT-TYPE
SYNTAX Hex (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0."
::= { atmIfUniSigOperEntry 4 }
atmIfUniSigStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the statistics associated with the
AtmSignalling component."
::= { atmIfUniSig 13 }
atmIfUniSigStatsEntry OBJECT-TYPE
SYNTAX AtmIfUniSigStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniSigStatsTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex }
::= { atmIfUniSigStatsTable 1 }
AtmIfUniSigStatsEntry ::= SEQUENCE {
atmIfUniSigCurrentConnections
Counter32,
atmIfUniSigPeakConnections
Gauge32,
atmIfUniSigSuccessfulConnections
Counter32,
atmIfUniSigFailedConnections
Counter32,
atmIfUniSigTxPdus
Counter32,
atmIfUniSigRxPdus
Counter32,
atmIfUniSigCurrentPmpConnections
Gauge32,
atmIfUniSigPeakPmpConnections
Gauge32,
atmIfUniSigSuccessfulPmpConnections
Counter32,
atmIfUniSigFailedPmpConnections
Counter32,
atmIfUniSigNewCurrentConnections
Gauge32 }
atmIfUniSigCurrentConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute indicates the total number of currently active
connections."
::= { atmIfUniSigStatsEntry 1 }
atmIfUniSigPeakConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections."
::= { atmIfUniSigStatsEntry 2 }
atmIfUniSigSuccessfulConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded."
::= { atmIfUniSigStatsEntry 3 }
atmIfUniSigFailedConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded."
::= { atmIfUniSigStatsEntry 4 }
atmIfUniSigTxPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded."
::= { atmIfUniSigStatsEntry 5 }
atmIfUniSigRxPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded."
::= { atmIfUniSigStatsEntry 6 }
atmIfUniSigCurrentPmpConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of currently active point-to-
multipoint connections."
::= { atmIfUniSigStatsEntry 7 }
atmIfUniSigPeakPmpConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the high water mark of active point-to-
multipoint connections."
::= { atmIfUniSigStatsEntry 8 }
atmIfUniSigSuccessfulPmpConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded."
::= { atmIfUniSigStatsEntry 9 }
atmIfUniSigFailedPmpConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded."
::= { atmIfUniSigStatsEntry 10 }
atmIfUniSigNewCurrentConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections."
::= { atmIfUniSigStatsEntry 11 }
atmIfUniSigVcd OBJECT IDENTIFIER ::= { atmIfUniSig 2 }
atmIfUniSigVcdRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigVcdRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUniSigVcd components."
::= { atmIfUniSigVcd 1 }
atmIfUniSigVcdRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniSigVcdRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUniSigVcd component."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex,
atmIfUniSigVcdIndex }
::= { atmIfUniSigVcdRowStatusTable 1 }
AtmIfUniSigVcdRowStatusEntry ::= SEQUENCE {
atmIfUniSigVcdRowStatus
RowStatus,
atmIfUniSigVcdComponentName
DisplayString,
atmIfUniSigVcdStorageType
StorageType,
atmIfUniSigVcdIndex
NonReplicated }
atmIfUniSigVcdRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUniSigVcd components.
These components can be added and deleted."
::= { atmIfUniSigVcdRowStatusEntry 1 }
atmIfUniSigVcdComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniSigVcdRowStatusEntry 2 }
atmIfUniSigVcdStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUniSigVcd tables."
::= { atmIfUniSigVcdRowStatusEntry 4 }
atmIfUniSigVcdIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfUniSigVcd tables."
::= { atmIfUniSigVcdRowStatusEntry 10 }
atmIfUniSigVcdProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigVcdProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable traffic attributes for a control
channel."
::= { atmIfUniSigVcd 10 }
atmIfUniSigVcdProvEntry OBJECT-TYPE
SYNTAX AtmIfUniSigVcdProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniSigVcdProvTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex,
atmIfUniSigVcdIndex }
::= { atmIfUniSigVcdProvTable 1 }
AtmIfUniSigVcdProvEntry ::= SEQUENCE {
atmIfUniSigVcdTrafficDescType
INTEGER,
atmIfUniSigVcdAtmServiceCategory
INTEGER,
atmIfUniSigVcdQosClass
INTEGER,
atmIfUniSigVcdTrafficShaping
INTEGER,
atmIfUniSigVcdUnshapedTransmitQueueing
INTEGER,
atmIfUniSigVcdUsageParameterControl
INTEGER }
atmIfUniSigVcdTrafficDescType OBJECT-TYPE
SYNTAX INTEGER {
n3(3),
n6(6),
n7(7),
n8(8) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute."
DEFVAL { n6 }
::= { atmIfUniSigVcdProvEntry 1 }
atmIfUniSigVcdAtmServiceCategory OBJECT-TYPE
SYNTAX INTEGER {
unspecifiedBitRate(0),
constantBitRate(1),
rtVariableBitRate(2),
nrtVariableBitRate(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection."
DEFVAL { rtVariableBitRate }
::= { atmIfUniSigVcdProvEntry 3 }
atmIfUniSigVcdQosClass OBJECT-TYPE
SYNTAX INTEGER {
n0(0),
n1(1),
n2(2),
n3(3),
n4(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters."
DEFVAL { n2 }
::= { atmIfUniSigVcdProvEntry 21 }
atmIfUniSigVcdTrafficShaping OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
sameAsCa(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled."
DEFVAL { disabled }
::= { atmIfUniSigVcdProvEntry 50 }
atmIfUniSigVcdUnshapedTransmitQueueing OBJECT-TYPE
SYNTAX INTEGER {
common(1),
sameAsCa(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be used"
DEFVAL { sameAsCa }
::= { atmIfUniSigVcdProvEntry 60 }
atmIfUniSigVcdUsageParameterControl OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
sameAsCa(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be used"
DEFVAL { disabled }
::= { atmIfUniSigVcdProvEntry 70 }
atmIfUniSigVcdTdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniSigVcdTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR."
::= { atmIfUniSigVcd 387 }
atmIfUniSigVcdTdpEntry OBJECT-TYPE
SYNTAX AtmIfUniSigVcdTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniSigVcdTdpTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniSigIndex,
atmIfUniSigVcdIndex,
atmIfUniSigVcdTdpIndex }
::= { atmIfUniSigVcdTdpTable 1 }
AtmIfUniSigVcdTdpEntry ::= SEQUENCE {
atmIfUniSigVcdTdpIndex
Integer32,
atmIfUniSigVcdTdpValue
Unsigned32 }
atmIfUniSigVcdTdpIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the atmIfUniSigVcdTdpTable
specific index for the atmIfUniSigVcdTdpTable."
::= { atmIfUniSigVcdTdpEntry 1 }
atmIfUniSigVcdTdpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
atmIfUniSigVcdTdpTable."
::= { atmIfUniSigVcdTdpEntry 2 }
atmIfUniAddr OBJECT IDENTIFIER ::= { atmIfUni 4 }
atmIfUniAddrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUniAddr components."
::= { atmIfUniAddr 1 }
atmIfUniAddrRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUniAddr component."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniAddrAddressIndex,
atmIfUniAddrAddressTypeIndex }
::= { atmIfUniAddrRowStatusTable 1 }
AtmIfUniAddrRowStatusEntry ::= SEQUENCE {
atmIfUniAddrRowStatus
RowStatus,
atmIfUniAddrComponentName
DisplayString,
atmIfUniAddrStorageType
StorageType,
atmIfUniAddrAddressIndex
AsciiStringIndex,
atmIfUniAddrAddressTypeIndex
INTEGER }
atmIfUniAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUniAddr components.
These components can be added and deleted."
::= { atmIfUniAddrRowStatusEntry 1 }
atmIfUniAddrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniAddrRowStatusEntry 2 }
atmIfUniAddrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUniAddr tables."
::= { atmIfUniAddrRowStatusEntry 4 }
atmIfUniAddrAddressIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..40))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the atmIfUniAddr tables."
::= { atmIfUniAddrRowStatusEntry 10 }
atmIfUniAddrAddressTypeIndex OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
alternate(1),
registered(2),
default(3) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the atmIfUniAddr tables."
::= { atmIfUniAddrRowStatusEntry 11 }
atmIfUniAddrOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
Address component."
::= { atmIfUniAddr 10 }
atmIfUniAddrOperEntry OBJECT-TYPE
SYNTAX AtmIfUniAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniAddrOperTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniAddrAddressIndex,
atmIfUniAddrAddressTypeIndex }
::= { atmIfUniAddrOperTable 1 }
AtmIfUniAddrOperEntry ::= SEQUENCE {
atmIfUniAddrScope
INTEGER,
atmIfUniAddrReachability
INTEGER }
atmIfUniAddrScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1."
::= { atmIfUniAddrOperEntry 1 }
atmIfUniAddrReachability OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain."
::= { atmIfUniAddrOperEntry 2 }
atmIfUniAddrTermSP OBJECT IDENTIFIER ::= { atmIfUniAddr 2 }
atmIfUniAddrTermSPRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniAddrTermSPRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUniAddrTermSP components."
::= { atmIfUniAddrTermSP 1 }
atmIfUniAddrTermSPRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniAddrTermSPRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUniAddrTermSP component."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniAddrAddressIndex,
atmIfUniAddrAddressTypeIndex,
atmIfUniAddrTermSPIndex }
::= { atmIfUniAddrTermSPRowStatusTable 1 }
AtmIfUniAddrTermSPRowStatusEntry ::= SEQUENCE {
atmIfUniAddrTermSPRowStatus
RowStatus,
atmIfUniAddrTermSPComponentName
DisplayString,
atmIfUniAddrTermSPStorageType
StorageType,
atmIfUniAddrTermSPIndex
NonReplicated }
atmIfUniAddrTermSPRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUniAddrTermSP components.
These components can be added and deleted."
::= { atmIfUniAddrTermSPRowStatusEntry 1 }
atmIfUniAddrTermSPComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniAddrTermSPRowStatusEntry 2 }
atmIfUniAddrTermSPStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUniAddrTermSP tables."
::= { atmIfUniAddrTermSPRowStatusEntry 4 }
atmIfUniAddrTermSPIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfUniAddrTermSP tables."
::= { atmIfUniAddrTermSPRowStatusEntry 10 }
atmIfUniAddrPnniInfo OBJECT IDENTIFIER ::= { atmIfUniAddr 3 }
atmIfUniAddrPnniInfoRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniAddrPnniInfoRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfUniAddrPnniInfo components."
::= { atmIfUniAddrPnniInfo 1 }
atmIfUniAddrPnniInfoRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfUniAddrPnniInfoRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfUniAddrPnniInfo component."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniAddrAddressIndex,
atmIfUniAddrAddressTypeIndex,
atmIfUniAddrPnniInfoIndex }
::= { atmIfUniAddrPnniInfoRowStatusTable 1 }
AtmIfUniAddrPnniInfoRowStatusEntry ::= SEQUENCE {
atmIfUniAddrPnniInfoRowStatus
RowStatus,
atmIfUniAddrPnniInfoComponentName
DisplayString,
atmIfUniAddrPnniInfoStorageType
StorageType,
atmIfUniAddrPnniInfoIndex
NonReplicated }
atmIfUniAddrPnniInfoRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfUniAddrPnniInfo components.
These components can be added and deleted."
::= { atmIfUniAddrPnniInfoRowStatusEntry 1 }
atmIfUniAddrPnniInfoComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfUniAddrPnniInfoRowStatusEntry 2 }
atmIfUniAddrPnniInfoStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfUniAddrPnniInfo tables."
::= { atmIfUniAddrPnniInfoRowStatusEntry 4 }
atmIfUniAddrPnniInfoIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfUniAddrPnniInfo tables."
::= { atmIfUniAddrPnniInfoRowStatusEntry 10 }
atmIfUniAddrPnniInfoProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfUniAddrPnniInfoProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component."
::= { atmIfUniAddrPnniInfo 10 }
atmIfUniAddrPnniInfoProvEntry OBJECT-TYPE
SYNTAX AtmIfUniAddrPnniInfoProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfUniAddrPnniInfoProvTable."
INDEX {
atmIfIndex,
atmIfUniIndex,
atmIfUniAddrAddressIndex,
atmIfUniAddrAddressTypeIndex,
atmIfUniAddrPnniInfoIndex }
::= { atmIfUniAddrPnniInfoProvTable 1 }
AtmIfUniAddrPnniInfoProvEntry ::= SEQUENCE {
atmIfUniAddrPnniInfoScope
INTEGER,
atmIfUniAddrPnniInfoReachability
INTEGER }
atmIfUniAddrPnniInfoScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain."
DEFVAL { -1 }
::= { atmIfUniAddrPnniInfoProvEntry 1 }
atmIfUniAddrPnniInfoReachability OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain."
DEFVAL { internal }
::= { atmIfUniAddrPnniInfoProvEntry 2 }
atmIfVptUni OBJECT IDENTIFIER ::= { atmIfVpt 8 }
atmIfVptUniRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptUni components."
::= { atmIfVptUni 1 }
atmIfVptUniRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptUniRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptUni component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex }
::= { atmIfVptUniRowStatusTable 1 }
AtmIfVptUniRowStatusEntry ::= SEQUENCE {
atmIfVptUniRowStatus
RowStatus,
atmIfVptUniComponentName
DisplayString,
atmIfVptUniStorageType
StorageType,
atmIfVptUniIndex
NonReplicated }
atmIfVptUniRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptUni components.
These components can be added and deleted."
::= { atmIfVptUniRowStatusEntry 1 }
atmIfVptUniComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptUniRowStatusEntry 2 }
atmIfVptUniStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptUni tables."
::= { atmIfVptUniRowStatusEntry 4 }
atmIfVptUniIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptUni tables."
::= { atmIfVptUniRowStatusEntry 10 }
atmIfVptUniProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the Uni
component."
::= { atmIfVptUni 10 }
atmIfVptUniProvEntry OBJECT-TYPE
SYNTAX AtmIfVptUniProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniProvTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex }
::= { atmIfVptUniProvTable 1 }
AtmIfVptUniProvEntry ::= SEQUENCE {
atmIfVptUniVersion
INTEGER,
atmIfVptUniSide
INTEGER,
atmIfVptUniSoftPvcRetryPeriod
Unsigned32,
atmIfVptUniSoftPvpAndPvcRetryPeriod
Unsigned32,
atmIfVptUniSoftPvpAndPvcHoldOffTime
Unsigned32 }
atmIfVptUniVersion OBJECT-TYPE
SYNTAX INTEGER {
atmForum30(0),
atmForum31(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies which specification the UNI complies with.
The options are ATM FORUM 3.0 or ATM FORUM 3.1. If this
attribute is changed then all switched Vcc components in this
interface are cleared due to the fact that the two versions are
incompatible."
DEFVAL { atmForum31 }
::= { atmIfVptUniProvEntry 1 }
atmIfVptUniSide OBJECT-TYPE
SYNTAX INTEGER {
network(0),
user(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates which side the interface is, user or network."
DEFVAL { network }
::= { atmIfVptUniProvEntry 2 }
atmIfVptUniSoftPvcRetryPeriod OBJECT-TYPE
SYNTAX Unsigned32 (20..999999)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the time in seconds to wait between call set
up retries. The resolution is to the nearest 10 seconds.
This attribute has been obsoleted and is replaced by the
softPvpAndPvcRetryPeriod attribute."
DEFVAL { 60 }
::= { atmIfVptUniProvEntry 3 }
atmIfVptUniSoftPvpAndPvcRetryPeriod OBJECT-TYPE
SYNTAX Unsigned32 (20..999999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the time in seconds to wait between soft
PVP or soft PVC call setup retries. The resolution is to the nearest
10 seconds."
DEFVAL { 60 }
::= { atmIfVptUniProvEntry 4 }
atmIfVptUniSoftPvpAndPvcHoldOffTime OBJECT-TYPE
SYNTAX Unsigned32 (0 | 50..20000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how long to hold off retries following a
release or the connection. The resolution is to the nearest 50 ms."
DEFVAL { 0 }
::= { atmIfVptUniProvEntry 5 }
atmIfVptUniAcctOptTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniAcctOptEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for accounting."
::= { atmIfVptUni 11 }
atmIfVptUniAcctOptEntry OBJECT-TYPE
SYNTAX AtmIfVptUniAcctOptEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniAcctOptTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex }
::= { atmIfVptUniAcctOptTable 1 }
AtmIfVptUniAcctOptEntry ::= SEQUENCE {
atmIfVptUniAccountCollection
OCTET STRING,
atmIfVptUniAccountConnectionType
INTEGER,
atmIfVptUniAccountClass
Unsigned32,
atmIfVptUniServiceExchange
Unsigned32 }
atmIfVptUniAccountCollection OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to turn accounting on or off for SVC and
SPVC connections. It also specifies the reason(s) for which
accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be
generated by this interface in the following situations:
- on a TODA changeover if TODA is enabled;
- every 12 hours (per connection) if TODA is disabled;
- on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be
suppressed.
The reason for collection is recorded in the accounting record, in
the attribute callingCollectReason or calledCollectReason as
appropriate.
Description of bits:
bill(0)
test(1)
study(2)
audit(3)
force(4)"
::= { atmIfVptUniAcctOptEntry 1 }
atmIfVptUniAccountConnectionType OBJECT-TYPE
SYNTAX INTEGER {
origTerm(0),
intermediate(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether accounting records generated by
this interface should be marked as originating, terminating or
intermediate. This attribute, in combination with the direction of the
call, determines the value of attribute connPointType of the
accounting record and may be used by downstream accounting
processes to correlate the records.
If the value is origTerm then records generated for incoming calls
will be marked as originating and records generated for outgoing
calls will be marked as terminating.
If the value is intermediate then records generated for all calls will
be marked as intermediate."
DEFVAL { origTerm }
::= { atmIfVptUniAcctOptEntry 2 }
atmIfVptUniAccountClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the accounting class associated with the
interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingServiceType or
calledServiceType as appropriate."
DEFVAL { 0 }
::= { atmIfVptUniAcctOptEntry 3 }
atmIfVptUniServiceExchange OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the data service exchange associated with
this interface. Its meaning is determined by the network operator.
Its value is simply recorded in the accounting records generated by
this interface, in the attribute callingDse or calledDse as
appropriate."
DEFVAL { 0 }
::= { atmIfVptUniAcctOptEntry 4 }
atmIfVptUniVProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniVProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the Uni
component which are specific to virtual UNI interfaces."
::= { atmIfVptUni 12 }
atmIfVptUniVProvEntry OBJECT-TYPE
SYNTAX AtmIfVptUniVProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniVProvTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex }
::= { atmIfVptUniVProvTable 1 }
AtmIfVptUniVProvEntry ::= SEQUENCE {
atmIfVptUniVpci
Unsigned32 }
atmIfVptUniVpci OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Virtual Path Connection Identifier
(VPCI) to be used between this signalling entity and its peer. The
VPCI of the peer virtual UNI must have the same value for
switched connections to be set up across the interface."
DEFVAL { 0 }
::= { atmIfVptUniVProvEntry 1 }
atmIfVptUniSig OBJECT IDENTIFIER ::= { atmIfVptUni 2 }
atmIfVptUniSigRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptUniSig components."
::= { atmIfVptUniSig 1 }
atmIfVptUniSigRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptUniSig component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex }
::= { atmIfVptUniSigRowStatusTable 1 }
AtmIfVptUniSigRowStatusEntry ::= SEQUENCE {
atmIfVptUniSigRowStatus
RowStatus,
atmIfVptUniSigComponentName
DisplayString,
atmIfVptUniSigStorageType
StorageType,
atmIfVptUniSigIndex
NonReplicated }
atmIfVptUniSigRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptUniSig components.
These components cannot be added nor deleted."
::= { atmIfVptUniSigRowStatusEntry 1 }
atmIfVptUniSigComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptUniSigRowStatusEntry 2 }
atmIfVptUniSigStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptUniSig tables."
::= { atmIfVptUniSigRowStatusEntry 4 }
atmIfVptUniSigIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptUniSig tables."
::= { atmIfVptUniSigRowStatusEntry 10 }
atmIfVptUniSigProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisionable attributes for the
Signalling component."
::= { atmIfVptUniSig 10 }
atmIfVptUniSigProvEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniSigProvTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex }
::= { atmIfVptUniSigProvTable 1 }
AtmIfVptUniSigProvEntry ::= SEQUENCE {
atmIfVptUniSigVci
Unsigned32,
atmIfVptUniSigAddressConversion
INTEGER }
atmIfVptUniSigVci OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the signalling channel number."
DEFVAL { 5 }
::= { atmIfVptUniSigProvEntry 1 }
atmIfVptUniSigAddressConversion OBJECT-TYPE
SYNTAX INTEGER {
none(0),
nativeE164(1),
nsap(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the address conversion on the outgoing
signalling PDUs. The options are none, nativeE164, or nsap. The
none option is the default and if this option is chosen then nothing
is done to the address information element (IE) in the outgoing
signalling message. If nativeE164 option is chosen, then only
NSAP encapsulated E.164 addresses with zeros in the ESI are
converted to native E.164 format in the outgoing signalling
message. If the NSAP address is not encapsulated E.164 or the ESI
field is not zeros and the nativeE164 option is chosen, then the call
is cleared. If the nsap option is chosen, then native E.164 addresses
are converted to NSAP E.164 with zeros in the ESI field; otherwise
the address is in NSAP format and is not changed."
DEFVAL { none }
::= { atmIfVptUniSigProvEntry 2 }
atmIfVptUniSigStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { atmIfVptUniSig 11 }
atmIfVptUniSigStateEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniSigStateTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex }
::= { atmIfVptUniSigStateTable 1 }
AtmIfVptUniSigStateEntry ::= SEQUENCE {
atmIfVptUniSigAdminState
INTEGER,
atmIfVptUniSigOperationalState
INTEGER,
atmIfVptUniSigUsageState
INTEGER }
atmIfVptUniSigAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { atmIfVptUniSigStateEntry 1 }
atmIfVptUniSigOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { atmIfVptUniSigStateEntry 2 }
atmIfVptUniSigUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { atmIfVptUniSigStateEntry 3 }
atmIfVptUniSigOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute contains the operational attributes for the
AtmSignalling component."
::= { atmIfVptUniSig 12 }
atmIfVptUniSigOperEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniSigOperTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex }
::= { atmIfVptUniSigOperTable 1 }
AtmIfVptUniSigOperEntry ::= SEQUENCE {
atmIfVptUniSigLastTxCauseCode
Unsigned32,
atmIfVptUniSigLastTxDiagCode
Hex,
atmIfVptUniSigLastRxCauseCode
Unsigned32,
atmIfVptUniSigLastRxDiagCode
Hex }
atmIfVptUniSigLastTxCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the cause code in the last transmitted
signalling message that contains the CAUSE information element.
The cause code is used to describe the reason for generating certain
signalling messages."
::= { atmIfVptUniSigOperEntry 1 }
atmIfVptUniSigLastTxDiagCode OBJECT-TYPE
SYNTAX Hex (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last transmitted
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0."
::= { atmIfVptUniSigOperEntry 2 }
atmIfVptUniSigLastRxCauseCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the cause code in the last received signalling
message that contains the CAUSE information element. The cause
code is used to describe the reason for generating certain signalling
messages."
::= { atmIfVptUniSigOperEntry 3 }
atmIfVptUniSigLastRxDiagCode OBJECT-TYPE
SYNTAX Hex (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the diagnostic code in the last received
signalling message. The diagnostic code is contained in the CAUSE
information element and identifies an information element type or
timer type. The diagnostic code is present only if a procedural error
is detected by the signalling protocol. A diagnostic code is always
accompanied by the cause code. If there is no failure, this attribute
is set to 0."
::= { atmIfVptUniSigOperEntry 4 }
atmIfVptUniSigStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the statistics associated with the
AtmSignalling component."
::= { atmIfVptUniSig 13 }
atmIfVptUniSigStatsEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniSigStatsTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex }
::= { atmIfVptUniSigStatsTable 1 }
AtmIfVptUniSigStatsEntry ::= SEQUENCE {
atmIfVptUniSigCurrentConnections
Counter32,
atmIfVptUniSigPeakConnections
Gauge32,
atmIfVptUniSigSuccessfulConnections
Counter32,
atmIfVptUniSigFailedConnections
Counter32,
atmIfVptUniSigTxPdus
Counter32,
atmIfVptUniSigRxPdus
Counter32,
atmIfVptUniSigCurrentPmpConnections
Gauge32,
atmIfVptUniSigPeakPmpConnections
Gauge32,
atmIfVptUniSigSuccessfulPmpConnections
Counter32,
atmIfVptUniSigFailedPmpConnections
Counter32,
atmIfVptUniSigNewCurrentConnections
Gauge32 }
atmIfVptUniSigCurrentConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute indicates the total number of currently active
connections."
::= { atmIfVptUniSigStatsEntry 1 }
atmIfVptUniSigPeakConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the high water mark of active point-to-
point and point-to-multipoint connections."
::= { atmIfVptUniSigStatsEntry 2 }
atmIfVptUniSigSuccessfulConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of switched point-to-
point and point-to-multipoint connections that were successfully
established. The counter wraps to 0 when the maximum value is
exceeded."
::= { atmIfVptUniSigStatsEntry 3 }
atmIfVptUniSigFailedConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of switched connections that
were not successfully established.The counter wraps to 0 when the
maximum value is exceeded."
::= { atmIfVptUniSigStatsEntry 4 }
atmIfVptUniSigTxPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of transmitted signalling
PDUs.The counter wraps to 0 when the maximum value is
exceeded."
::= { atmIfVptUniSigStatsEntry 5 }
atmIfVptUniSigRxPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of received signalling PDUs.The
counter wraps to 0 when the maximum value is exceeded."
::= { atmIfVptUniSigStatsEntry 6 }
atmIfVptUniSigCurrentPmpConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of currently active point-to-
multipoint connections."
::= { atmIfVptUniSigStatsEntry 7 }
atmIfVptUniSigPeakPmpConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the high water mark of active point-to-
multipoint connections."
::= { atmIfVptUniSigStatsEntry 8 }
atmIfVptUniSigSuccessfulPmpConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of switched point-to-
multipoint connections that were successfully established.
The counter wraps to 0 when the maximum value is
exceeded."
::= { atmIfVptUniSigStatsEntry 9 }
atmIfVptUniSigFailedPmpConnections OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of switched point-to-
multipoint connections that were not successfully
established.The counter wraps to 0 when the maximum value
is exceeded."
::= { atmIfVptUniSigStatsEntry 10 }
atmIfVptUniSigNewCurrentConnections OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the total number of currently active point-to-
point and point-to-multipoint connections."
::= { atmIfVptUniSigStatsEntry 11 }
atmIfVptUniSigVcd OBJECT IDENTIFIER ::= { atmIfVptUniSig 2 }
atmIfVptUniSigVcdRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigVcdRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptUniSigVcd components."
::= { atmIfVptUniSigVcd 1 }
atmIfVptUniSigVcdRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigVcdRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptUniSigVcd component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex,
atmIfVptUniSigVcdIndex }
::= { atmIfVptUniSigVcdRowStatusTable 1 }
AtmIfVptUniSigVcdRowStatusEntry ::= SEQUENCE {
atmIfVptUniSigVcdRowStatus
RowStatus,
atmIfVptUniSigVcdComponentName
DisplayString,
atmIfVptUniSigVcdStorageType
StorageType,
atmIfVptUniSigVcdIndex
NonReplicated }
atmIfVptUniSigVcdRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptUniSigVcd components.
These components can be added and deleted."
::= { atmIfVptUniSigVcdRowStatusEntry 1 }
atmIfVptUniSigVcdComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptUniSigVcdRowStatusEntry 2 }
atmIfVptUniSigVcdStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptUniSigVcd tables."
::= { atmIfVptUniSigVcdRowStatusEntry 4 }
atmIfVptUniSigVcdIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptUniSigVcd tables."
::= { atmIfVptUniSigVcdRowStatusEntry 10 }
atmIfVptUniSigVcdProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigVcdProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable traffic attributes for a control
channel."
::= { atmIfVptUniSigVcd 10 }
atmIfVptUniSigVcdProvEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigVcdProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniSigVcdProvTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex,
atmIfVptUniSigVcdIndex }
::= { atmIfVptUniSigVcdProvTable 1 }
AtmIfVptUniSigVcdProvEntry ::= SEQUENCE {
atmIfVptUniSigVcdTrafficDescType
INTEGER,
atmIfVptUniSigVcdAtmServiceCategory
INTEGER,
atmIfVptUniSigVcdQosClass
INTEGER,
atmIfVptUniSigVcdTrafficShaping
INTEGER,
atmIfVptUniSigVcdUnshapedTransmitQueueing
INTEGER,
atmIfVptUniSigVcdUsageParameterControl
INTEGER }
atmIfVptUniSigVcdTrafficDescType OBJECT-TYPE
SYNTAX INTEGER {
n3(3),
n6(6),
n7(7),
n8(8) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of traffic management which is
applied to both the transmit and receive direction of this connection
as defined in the ATM Forum. The trafficDescType determines the
number and meaning of the parameters in the trafficDescParm
attribute."
DEFVAL { n6 }
::= { atmIfVptUniSigVcdProvEntry 1 }
atmIfVptUniSigVcdAtmServiceCategory OBJECT-TYPE
SYNTAX INTEGER {
unspecifiedBitRate(0),
constantBitRate(1),
rtVariableBitRate(2),
nrtVariableBitRate(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the ATM service category for both directions
of the connection.
The constantBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. The consistent availability of a fixed quantity of
bandwidth is considered appropriate for CBR service. Cells which
are delayed beyond the value specified by CellTransfer Delay are
assumed to be of significantly reduce value to the application.
The rtVariableBitRate service category is intended for real time
applications, that is those requiring tightly constrained delay and
delay variation, as would be appropriate for voice and video
applications. Sources are expected to transmit at a rate which varies
with time. Equivalently, the source can be described as 'bursty'.
Cells which are delayed beyond the value specified by CTD are
assumed to be of significantly reduced value to the application. Real
time VBR service may support statistical multiplexing of real time
sources.
The nrtVariableBitRate service category is intended for non-real
time applications which have bursty traffic characteristics and which
can be characterized in terms of a PCR, SCR, and MBS. For those
cells which are transferred within the traffic contract, the application
expects a low cell loss ratio. For all connections, it expects a bound
on the mean cell transfer delay. Non-real time VBR service may
support statistical multiplexing of connections.
The unspecifiedBitRate service is intended for non-real time
applications; that is, those not requiring tightly constrained delay
and delay variation. UBR sources are expected to be bursty. UBR
service supports a high degree of statistical multiplexing among
sources. UBR service does not specify traffic related service
guarantees. No numerical commitments are made with respect to
the cell loss ratio experienced by a UBR connection, or as to the
cell transfer delay experienced by cells on the connection."
DEFVAL { rtVariableBitRate }
::= { atmIfVptUniSigVcdProvEntry 3 }
atmIfVptUniSigVcdQosClass OBJECT-TYPE
SYNTAX INTEGER {
n0(0),
n1(1),
n2(2),
n3(3),
n4(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the quality of service for both the forward
and backward direction for this connection.
Class 1 supports a QOS that meets Service Class A performance
requirements (Circuit emulation, constant bit rate video).
Class 2 supports a QOS that meets Service Class B performance
requirements (Variable bit rate audio and video).
Class 3 supports a QOS that meets Service Class C performance
requirements (Connection-Oriented Data Transfer).
Class 4 supports a QOS that meets Service Class D performance
requirements (Connectionless Data Transfer).
Class 0 is the unspecified bit rate QOS class; no objective is
specified for the performance parameters."
DEFVAL { n2 }
::= { atmIfVptUniSigVcdProvEntry 21 }
atmIfVptUniSigVcdTrafficShaping OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
sameAsCa(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether this connection uses traffic shaping
when transmitting traffic to the ATM interface.
When sameAsCa is selected, traffic shaping for this connection is
based on the trafficShaping attribute of the connection's service
category component under the AtmIf CA. If the service category has
traffic shaping enabled, then traffic shaping is enabled for the
connection. Note that enabling traffic shaping may have no effect
under certain cases. These cases are listed in the description of the
trafficShaping operational attribute, which is under the Vcc Tm and
Vpc Tm components.
When disabled is selected, traffic shaping for this connection is
disabled."
DEFVAL { disabled }
::= { atmIfVptUniSigVcdProvEntry 50 }
atmIfVptUniSigVcdUnshapedTransmitQueueing OBJECT-TYPE
SYNTAX INTEGER {
common(1),
sameAsCa(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute only applies when this connection is unshaped. This
attribute specifies the transmit queueing method for this connection
if it is unshaped. Refer to the unshapedTransmitQueueing attribute
under the AtmIf CA service category subcomponent for more details
on the meaning of this attribute.
When this attribute is set to sameAsCa, the transmit queueing
method for the connection is based on the
unshapedTransmitQueueing attribute of the connection's service
category component under the ConnectionAdministrator.
When this attribute is set to common, transmit traffic on this
unshaped connection is destined for the common queue.
The value sameAsInterface is for migration from previous software
releases, but should no longer be used"
DEFVAL { sameAsCa }
::= { atmIfVptUniSigVcdProvEntry 60 }
atmIfVptUniSigVcdUsageParameterControl OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
sameAsCa(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether this connection enforces usage
parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on
the usageParameterControl attribute of the connection's service
category component under the ConnectionAdministrator. If the
service category has UPC enabled, then UPC is enabled for the
connection. Note that enabling UPC may have no effect under
certain cases. These cases are listed in the description of the
usageParameterControl operational attribute, which is under the
Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software
releases, but should no longer be used"
DEFVAL { disabled }
::= { atmIfVptUniSigVcdProvEntry 70 }
atmIfVptUniSigVcdTdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniSigVcdTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a vector of five traffic parameters whose meanings
are defined by the trafficDescType attribute. The values of peak cell
rate (PCR), sustained cell rate (SCR) and requested shaping rate are
expressed in cell/s. Maximum burst size (MBS) is expressed in
cells. CDVT is expressed in microseconds. The values of PCR,
SCR, MBS and CDVT are used for connection admission control
(CAC). The value of CDVT is only used for connections where the
atmServiceCategory is constantBitRate. For all other values of
atmServiceCategory, CDVT is ignored. The values of PCR, SCR
and requested shaping rate are used to determine the actual shaping
rate where traffic shaping is enabled.
When trafficDescType is 3, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3
must be zero.
When trafficDescType is 6, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP
equal to 0 and 1 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 7, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 with cell discard; parameter 3 represents the MBS for
CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
When trafficDescType is 8, parameter 1 represents the PCR for CLP
equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP
equal to 0 traffic with cell tagging; parameter 3 represents the MBS
for CLP equal to 0 traffic; parameter 4 represents the CDVT; and
parameter 5 represents the requested shaping rate. A non-zero value
in parameter 5 overrides any value in parameter 1. This result is
used as the PCR. Parameters 1, 2, and 3 must be non-zero.
Parameter 1 must be greater than or equal to parameter 2. Parameter
5 must either be zero (unused) or greater than or equal to parameter
2.
Whenever it is valid for PCR to be specified, parameter 5 may also
be used to specify a requested shaping rate. A non-zero value in
parameter 5 overrides the value in parameter 1 and is used as the
peak cell rate in calculations of CAC and shaping rate.
For trafficDescType 3 the traffic is shaped at the next rate less than
the PCR.
For trafficDescType 6, 7, and 8, the traffic is shaped at the highest
available rate which is between PCR and SCR. However, if there is
no available shaping rate between PCR and SCR, traffic is shaped at
the next rate above the PCR."
::= { atmIfVptUniSigVcd 387 }
atmIfVptUniSigVcdTdpEntry OBJECT-TYPE
SYNTAX AtmIfVptUniSigVcdTdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniSigVcdTdpTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniSigIndex,
atmIfVptUniSigVcdIndex,
atmIfVptUniSigVcdTdpIndex }
::= { atmIfVptUniSigVcdTdpTable 1 }
AtmIfVptUniSigVcdTdpEntry ::= SEQUENCE {
atmIfVptUniSigVcdTdpIndex
Integer32,
atmIfVptUniSigVcdTdpValue
Unsigned32 }
atmIfVptUniSigVcdTdpIndex OBJECT-TYPE
SYNTAX Integer32 (1..5)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the atmIfVptUniSigVcdTdpTable
specific index for the atmIfVptUniSigVcdTdpTable."
::= { atmIfVptUniSigVcdTdpEntry 1 }
atmIfVptUniSigVcdTdpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
atmIfVptUniSigVcdTdpTable."
::= { atmIfVptUniSigVcdTdpEntry 2 }
atmIfVptUniAddr OBJECT IDENTIFIER ::= { atmIfVptUni 3 }
atmIfVptUniAddrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptUniAddr components."
::= { atmIfVptUniAddr 1 }
atmIfVptUniAddrRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptUniAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptUniAddr component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniAddrAddressIndex,
atmIfVptUniAddrAddressTypeIndex }
::= { atmIfVptUniAddrRowStatusTable 1 }
AtmIfVptUniAddrRowStatusEntry ::= SEQUENCE {
atmIfVptUniAddrRowStatus
RowStatus,
atmIfVptUniAddrComponentName
DisplayString,
atmIfVptUniAddrStorageType
StorageType,
atmIfVptUniAddrAddressIndex
AsciiStringIndex,
atmIfVptUniAddrAddressTypeIndex
INTEGER }
atmIfVptUniAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptUniAddr components.
These components can be added and deleted."
::= { atmIfVptUniAddrRowStatusEntry 1 }
atmIfVptUniAddrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptUniAddrRowStatusEntry 2 }
atmIfVptUniAddrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptUniAddr tables."
::= { atmIfVptUniAddrRowStatusEntry 4 }
atmIfVptUniAddrAddressIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..40))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the atmIfVptUniAddr tables."
::= { atmIfVptUniAddrRowStatusEntry 10 }
atmIfVptUniAddrAddressTypeIndex OBJECT-TYPE
SYNTAX INTEGER {
primary(0),
alternate(1),
registered(2),
default(3) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the atmIfVptUniAddr tables."
::= { atmIfVptUniAddrRowStatusEntry 11 }
atmIfVptUniAddrOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
Address component."
::= { atmIfVptUniAddr 10 }
atmIfVptUniAddrOperEntry OBJECT-TYPE
SYNTAX AtmIfVptUniAddrOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniAddrOperTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniAddrAddressIndex,
atmIfVptUniAddrAddressTypeIndex }
::= { atmIfVptUniAddrOperTable 1 }
AtmIfVptUniAddrOperEntry ::= SEQUENCE {
atmIfVptUniAddrScope
INTEGER,
atmIfVptUniAddrReachability
INTEGER }
atmIfVptUniAddrScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the scope of the ATM address, which is the
highest level to which this address will be advertised in the PNNI
hierarchy. If no PnniInfo subcomponent has been provisioned, then
the scope will default to the level of this node in the PNNI
hierarchy. If this node does not participate in a PNNI hierarchy, then
this attribute will have the value of -1."
::= { atmIfVptUniAddrOperEntry 1 }
atmIfVptUniAddrReachability OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain."
::= { atmIfVptUniAddrOperEntry 2 }
atmIfVptUniAddrTermSP OBJECT IDENTIFIER ::= { atmIfVptUniAddr 2 }
atmIfVptUniAddrTermSPRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniAddrTermSPRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptUniAddrTermSP components."
::= { atmIfVptUniAddrTermSP 1 }
atmIfVptUniAddrTermSPRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptUniAddrTermSPRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptUniAddrTermSP component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniAddrAddressIndex,
atmIfVptUniAddrAddressTypeIndex,
atmIfVptUniAddrTermSPIndex }
::= { atmIfVptUniAddrTermSPRowStatusTable 1 }
AtmIfVptUniAddrTermSPRowStatusEntry ::= SEQUENCE {
atmIfVptUniAddrTermSPRowStatus
RowStatus,
atmIfVptUniAddrTermSPComponentName
DisplayString,
atmIfVptUniAddrTermSPStorageType
StorageType,
atmIfVptUniAddrTermSPIndex
NonReplicated }
atmIfVptUniAddrTermSPRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptUniAddrTermSP components.
These components can be added and deleted."
::= { atmIfVptUniAddrTermSPRowStatusEntry 1 }
atmIfVptUniAddrTermSPComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptUniAddrTermSPRowStatusEntry 2 }
atmIfVptUniAddrTermSPStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptUniAddrTermSP tables."
::= { atmIfVptUniAddrTermSPRowStatusEntry 4 }
atmIfVptUniAddrTermSPIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptUniAddrTermSP tables."
::= { atmIfVptUniAddrTermSPRowStatusEntry 10 }
atmIfVptUniAddrPnniInfo OBJECT IDENTIFIER ::= { atmIfVptUniAddr 3 }
atmIfVptUniAddrPnniInfoRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniAddrPnniInfoRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
atmIfVptUniAddrPnniInfo components."
::= { atmIfVptUniAddrPnniInfo 1 }
atmIfVptUniAddrPnniInfoRowStatusEntry OBJECT-TYPE
SYNTAX AtmIfVptUniAddrPnniInfoRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
atmIfVptUniAddrPnniInfo component."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniAddrAddressIndex,
atmIfVptUniAddrAddressTypeIndex,
atmIfVptUniAddrPnniInfoIndex }
::= { atmIfVptUniAddrPnniInfoRowStatusTable 1 }
AtmIfVptUniAddrPnniInfoRowStatusEntry ::= SEQUENCE {
atmIfVptUniAddrPnniInfoRowStatus
RowStatus,
atmIfVptUniAddrPnniInfoComponentName
DisplayString,
atmIfVptUniAddrPnniInfoStorageType
StorageType,
atmIfVptUniAddrPnniInfoIndex
NonReplicated }
atmIfVptUniAddrPnniInfoRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
atmIfVptUniAddrPnniInfo components.
These components can be added and deleted."
::= { atmIfVptUniAddrPnniInfoRowStatusEntry 1 }
atmIfVptUniAddrPnniInfoComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { atmIfVptUniAddrPnniInfoRowStatusEntry 2 }
atmIfVptUniAddrPnniInfoStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
atmIfVptUniAddrPnniInfo tables."
::= { atmIfVptUniAddrPnniInfoRowStatusEntry 4 }
atmIfVptUniAddrPnniInfoIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the atmIfVptUniAddrPnniInfo tables."
::= { atmIfVptUniAddrPnniInfoRowStatusEntry 10 }
atmIfVptUniAddrPnniInfoProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfVptUniAddrPnniInfoProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the provisioned attributes relating to
PNNI for a PnniInfo component."
::= { atmIfVptUniAddrPnniInfo 10 }
atmIfVptUniAddrPnniInfoProvEntry OBJECT-TYPE
SYNTAX AtmIfVptUniAddrPnniInfoProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the atmIfVptUniAddrPnniInfoProvTable."
INDEX {
atmIfIndex,
atmIfVptIndex,
atmIfVptUniIndex,
atmIfVptUniAddrAddressIndex,
atmIfVptUniAddrAddressTypeIndex,
atmIfVptUniAddrPnniInfoIndex }
::= { atmIfVptUniAddrPnniInfoProvTable 1 }
AtmIfVptUniAddrPnniInfoProvEntry ::= SEQUENCE {
atmIfVptUniAddrPnniInfoScope
INTEGER,
atmIfVptUniAddrPnniInfoReachability
INTEGER }
atmIfVptUniAddrPnniInfoScope OBJECT-TYPE
SYNTAX INTEGER (-1..104)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the scope of the ATM address, which is the
highest level up to which this address will be advertised in the
PNNI hierarchy. The scope must be set to a value numerically less
than or equal to the level of the lowest level peer group containing
this node. Setting the scope to 0 will cause the address to be
advertised globally within this PNNI routing domain."
DEFVAL { -1 }
::= { atmIfVptUniAddrPnniInfoProvEntry 1 }
atmIfVptUniAddrPnniInfoReachability OBJECT-TYPE
SYNTAX INTEGER {
internal(0),
exterior(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the address is internal or exterior.
An internal reachable address is an address of a destination that is
directly attached to the logical node advertising the address. An
exterior reachable address is an address that can be reached
through a PNNI routing domain, but which is not located in that
PNNI routing domain."
DEFVAL { internal }
::= { atmIfVptUniAddrPnniInfoProvEntry 2 }
atmUniGroup OBJECT IDENTIFIER ::= { atmUniMIB 1 }
atmUniGroupBE OBJECT IDENTIFIER ::= { atmUniGroup 5 }
atmUniGroupBE00 OBJECT IDENTIFIER ::= { atmUniGroupBE 1 }
atmUniGroupBE00A OBJECT IDENTIFIER ::= { atmUniGroupBE00 2 }
atmUniCapabilities OBJECT IDENTIFIER ::= { atmUniMIB 3 }
atmUniCapabilitiesBE OBJECT IDENTIFIER ::= { atmUniCapabilities 5 }
atmUniCapabilitiesBE00 OBJECT IDENTIFIER ::= { atmUniCapabilitiesBE 1 }
atmUniCapabilitiesBE00A OBJECT IDENTIFIER ::= { atmUniCapabilitiesBE00 2 }
END