Nortel-Magellan-Passport-BaseRoutingMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
components,
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
RowPointer,
DisplayString,
StorageType,
RowStatus,
Gauge32,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
NonReplicated,
FixedPoint1,
AsciiStringIndex,
DigitString
FROM Nortel-Magellan-Passport-TextualConventionsMIB;
baseRoutingMIB OBJECT IDENTIFIER ::= { passportMIBs 18 }
rtg OBJECT IDENTIFIER ::= { components 40 }
rtgRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rtg components."
::= { rtg 1 }
rtgRowStatusEntry OBJECT-TYPE
SYNTAX RtgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtg component."
INDEX {
rtgIndex }
::= { rtgRowStatusTable 1 }
RtgRowStatusEntry ::= SEQUENCE {
rtgRowStatus
RowStatus,
rtgComponentName
DisplayString,
rtgStorageType
StorageType,
rtgIndex
NonReplicated }
rtgRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtg components.
These components can be added."
::= { rtgRowStatusEntry 1 }
rtgComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgRowStatusEntry 2 }
rtgStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtg tables."
::= { rtgRowStatusEntry 4 }
rtgIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtg tables."
::= { rtgRowStatusEntry 10 }
rtgProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisioning data for the routing system."
::= { rtg 12 }
rtgProvEntry OBJECT-TYPE
SYNTAX RtgProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgProvTable."
INDEX {
rtgIndex }
::= { rtgProvTable 1 }
RtgProvEntry ::= SEQUENCE {
rtgTandemTraffic
INTEGER }
rtgTandemTraffic OBJECT-TYPE
SYNTAX INTEGER {
allowed(0),
denied(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether tandem traffic is permitted through
the node.
Tandem traffic is traffic which arrives at the node on a trunk and
leaves the node on a trunk. Traffic to or from a gateway (internal or
external) is not affected by the setting of this attribute.
The default value of this attribute is allowed, which permits tandem
traffic to be routed through the node. When this attribute is set to
denied, DPN, VNS, and PORS traffic are not permitted to tandem
through the node.
Changing this attribute has no effect on PORS calls which were set
up before the change. These calls can be manually forced to reroute
using the new setting by clearing the calls or locking the trunks on
which they are routed."
DEFVAL { allowed }
::= { rtgProvEntry 1 }
rtgSplittingRegionIdsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgSplittingRegionIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is used only when splitting or merging existing
topology regions. It specifies which topology regions are in a
migration status. A node will only exchange topological
information with a connected node under the following conditions:
(i) the nodes belong to the same topology region, (ii) one of the
nodes is provisioned with the default regionId of 0, (iii) the
connected node's splittingRegionIds attribute is provisioned to
contain the local node's regionId value and the local node's
splittingRegionIds is also provisioned to contain the connected
node's regionId value when both two nodes' regionIds are different
and non-zero.
When this attribute is used during migration of regions, values for
the attribute are normally the old and new regionIds for the node.
Use of this attribute makes it possible to migrate existing topology
regions in the following cases: (i) splitting a topology region into
two without isolating a node, (ii) merging two different topology
regions into one without introducing an extra topological barrier.
The attribute should be cleaned when all migration activities are
complete. At this point, the region boundary will take effect."
::= { rtg 407 }
rtgSplittingRegionIdsEntry OBJECT-TYPE
SYNTAX RtgSplittingRegionIdsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgSplittingRegionIdsTable."
INDEX {
rtgIndex,
rtgSplittingRegionIdsValue }
::= { rtgSplittingRegionIdsTable 1 }
RtgSplittingRegionIdsEntry ::= SEQUENCE {
rtgSplittingRegionIdsValue
Integer32,
rtgSplittingRegionIdsRowStatus
RowStatus }
rtgSplittingRegionIdsValue OBJECT-TYPE
SYNTAX Integer32 (1..126)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rtgSplittingRegionIdsTable."
::= { rtgSplittingRegionIdsEntry 1 }
rtgSplittingRegionIdsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the rtgSplittingRegionIdsTable."
::= { rtgSplittingRegionIdsEntry 2 }
rtgTop OBJECT IDENTIFIER ::= { rtg 5 }
rtgTopRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rtgTop components."
::= { rtgTop 1 }
rtgTopRowStatusEntry OBJECT-TYPE
SYNTAX RtgTopRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgTop component."
INDEX {
rtgIndex,
rtgTopIndex }
::= { rtgTopRowStatusTable 1 }
RtgTopRowStatusEntry ::= SEQUENCE {
rtgTopRowStatus
RowStatus,
rtgTopComponentName
DisplayString,
rtgTopStorageType
StorageType,
rtgTopIndex
NonReplicated }
rtgTopRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgTop components.
These components cannot be added nor deleted."
::= { rtgTopRowStatusEntry 1 }
rtgTopComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgTopRowStatusEntry 2 }
rtgTopStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgTop tables."
::= { rtgTopRowStatusEntry 4 }
rtgTopIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgTop tables."
::= { rtgTopRowStatusEntry 10 }
rtgTopStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Rtg Top Statistics
This group contains operational data stored and maintained by this
component for recording statistics of Passport routing control
packets which have been sent or received by Topology."
::= { rtgTop 11 }
rtgTopStatsEntry OBJECT-TYPE
SYNTAX RtgTopStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgTopStatsTable."
INDEX {
rtgIndex,
rtgTopIndex }
::= { rtgTopStatsTable 1 }
RtgTopStatsEntry ::= SEQUENCE {
rtgTopControlPktRx
Counter32,
rtgTopControlBytesRx
Counter32,
rtgTopControlPktTx
Counter32,
rtgTopControlBytesTx
Counter32 }
rtgTopControlPktRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute shows the total number of topology routing control
packets which have been received by this node from other Passport
nodes in the network."
::= { rtgTopStatsEntry 1 }
rtgTopControlBytesRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute shows the total number of topology routing control
packet bytes received by this node from other Passport nodes in the
network."
::= { rtgTopStatsEntry 2 }
rtgTopControlPktTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute shows the total number of topology routing control
packets which have been sent by this node to other Passport nodes
in the network."
::= { rtgTopStatsEntry 3 }
rtgTopControlBytesTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute shows the total number of topology routing control
packet bytes sent by this node to other Passport nodes in the
network."
::= { rtgTopStatsEntry 4 }
rtgTopNode OBJECT IDENTIFIER ::= { rtgTop 2 }
rtgTopNodeRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgTopNode components."
::= { rtgTopNode 1 }
rtgTopNodeRowStatusEntry OBJECT-TYPE
SYNTAX RtgTopNodeRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgTopNode component."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex }
::= { rtgTopNodeRowStatusTable 1 }
RtgTopNodeRowStatusEntry ::= SEQUENCE {
rtgTopNodeRowStatus
RowStatus,
rtgTopNodeComponentName
DisplayString,
rtgTopNodeStorageType
StorageType,
rtgTopNodeIndex
AsciiStringIndex }
rtgTopNodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgTopNode components.
These components cannot be added nor deleted."
::= { rtgTopNodeRowStatusEntry 1 }
rtgTopNodeComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgTopNodeRowStatusEntry 2 }
rtgTopNodeStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgTopNode tables."
::= { rtgTopNodeRowStatusEntry 4 }
rtgTopNodeIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..12))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgTopNode tables."
::= { rtgTopNodeRowStatusEntry 10 }
rtgTopNodeOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Rtg Top Node/<neighborNodeName> Operational
This group contains operational data about each node in the
Passport network and its connectivity to its neighbours."
::= { rtgTopNode 10 }
rtgTopNodeOperEntry OBJECT-TYPE
SYNTAX RtgTopNodeOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgTopNodeOperTable."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex }
::= { rtgTopNodeOperTable 1 }
RtgTopNodeOperEntry ::= SEQUENCE {
rtgTopNodeNodeId
Unsigned32 }
rtgTopNodeNodeId OBJECT-TYPE
SYNTAX Unsigned32 (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The nodeId is a number that uniquely identifies the Node
component instance in the Passport network. It is the identifier used
in the routing control packets sent by this node to other Passport
nodes in the network.
The nodeId, for each node in the network, is learned from the
Passport routing protocol packets."
::= { rtgTopNodeOperEntry 1 }
rtgTopNodeLg OBJECT IDENTIFIER ::= { rtgTopNode 2 }
rtgTopNodeLgRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeLgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgTopNodeLg components."
::= { rtgTopNodeLg 1 }
rtgTopNodeLgRowStatusEntry OBJECT-TYPE
SYNTAX RtgTopNodeLgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgTopNodeLg component."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex,
rtgTopNodeLgIndex }
::= { rtgTopNodeLgRowStatusTable 1 }
RtgTopNodeLgRowStatusEntry ::= SEQUENCE {
rtgTopNodeLgRowStatus
RowStatus,
rtgTopNodeLgComponentName
DisplayString,
rtgTopNodeLgStorageType
StorageType,
rtgTopNodeLgIndex
AsciiStringIndex }
rtgTopNodeLgRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgTopNodeLg components.
These components cannot be added nor deleted."
::= { rtgTopNodeLgRowStatusEntry 1 }
rtgTopNodeLgComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgTopNodeLgRowStatusEntry 2 }
rtgTopNodeLgStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgTopNodeLg tables."
::= { rtgTopNodeLgRowStatusEntry 4 }
rtgTopNodeLgIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..12))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgTopNodeLg tables."
::= { rtgTopNodeLgRowStatusEntry 10 }
rtgTopNodeLgOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeLgOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Rtg Top Node/<neighborNodeName> LinkGroup/
<neighborNodeName> Operational
This group contains the operational data stored and maintained by
TrunkGroup component for each trunk group attached to a node in
the Passport network."
::= { rtgTopNodeLg 10 }
rtgTopNodeLgOperEntry OBJECT-TYPE
SYNTAX RtgTopNodeLgOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgTopNodeLgOperTable."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex,
rtgTopNodeLgIndex }
::= { rtgTopNodeLgOperTable 1 }
RtgTopNodeLgOperEntry ::= SEQUENCE {
rtgTopNodeLgDelayMetric
Unsigned32,
rtgTopNodeLgTputMetric
Unsigned32 }
rtgTopNodeLgDelayMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the outbound cost to forward packets across
the trunk group for a delay class of service. It represents the trunk in
the trunk group with the lowest round trip delay. A low outbound
cost is preferable to a higher value as it is associated with higher
speed facilities.
A metric value of 2147483647 means that the trunk group is
unusable for the delay class of service."
::= { rtgTopNodeLgOperEntry 1 }
rtgTopNodeLgTputMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the outbound cost to forward packets across
the trunk group for a throughput class of service. It is computed
from the combined speed of each link in the trunk group. A low
outbound cost is preferable to a higher value as it is associated with
higher speed facilities.
A metric value of 2147483647 means that the trunk group is
unusable for the throughput class of service."
::= { rtgTopNodeLgOperEntry 2 }
rtgTopNodeLgLnnTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeLgLnnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute is a list of integers which specify the logical network
numbers supported by the trunk group.
Each of these numbers corresponds with a particular instance of
network protocol supported on this switch. LNN 0 is present on all
trunks by default to allow Passport control traffic on the trunk."
::= { rtgTopNodeLg 235 }
rtgTopNodeLgLnnEntry OBJECT-TYPE
SYNTAX RtgTopNodeLgLnnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgTopNodeLgLnnTable."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex,
rtgTopNodeLgIndex,
rtgTopNodeLgLnnValue }
::= { rtgTopNodeLgLnnTable 1 }
RtgTopNodeLgLnnEntry ::= SEQUENCE {
rtgTopNodeLgLnnValue
Integer32 }
rtgTopNodeLgLnnValue OBJECT-TYPE
SYNTAX Integer32 (0..2047)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rtgTopNodeLgLnnTable."
::= { rtgTopNodeLgLnnEntry 1 }
rtgTopNodeLgTrkObj OBJECT IDENTIFIER ::= { rtgTopNodeLg 2 }
rtgTopNodeLgTrkObjRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeLgTrkObjRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgTopNodeLgTrkObj components."
::= { rtgTopNodeLgTrkObj 1 }
rtgTopNodeLgTrkObjRowStatusEntry OBJECT-TYPE
SYNTAX RtgTopNodeLgTrkObjRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgTopNodeLgTrkObj component."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex,
rtgTopNodeLgIndex,
rtgTopNodeLgTrkObjIndex }
::= { rtgTopNodeLgTrkObjRowStatusTable 1 }
RtgTopNodeLgTrkObjRowStatusEntry ::= SEQUENCE {
rtgTopNodeLgTrkObjRowStatus
RowStatus,
rtgTopNodeLgTrkObjComponentName
DisplayString,
rtgTopNodeLgTrkObjStorageType
StorageType,
rtgTopNodeLgTrkObjIndex
Integer32 }
rtgTopNodeLgTrkObjRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgTopNodeLgTrkObj components.
These components cannot be added nor deleted."
::= { rtgTopNodeLgTrkObjRowStatusEntry 1 }
rtgTopNodeLgTrkObjComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgTopNodeLgTrkObjRowStatusEntry 2 }
rtgTopNodeLgTrkObjStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgTopNodeLgTrkObj tables."
::= { rtgTopNodeLgTrkObjRowStatusEntry 4 }
rtgTopNodeLgTrkObjIndex OBJECT-TYPE
SYNTAX Integer32 (1..1023)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgTopNodeLgTrkObj tables."
::= { rtgTopNodeLgTrkObjRowStatusEntry 10 }
rtgTopNodeLgTrkObjOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeLgTrkObjOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Rtg Top Node/<neighborNodeName> LinkGroup/
<neighborNodeName> Trunk/<Trm Lk Id> Operational
This group contains the operational data stored and maintained by
TplPorTrunk component."
::= { rtgTopNodeLgTrkObj 10 }
rtgTopNodeLgTrkObjOperEntry OBJECT-TYPE
SYNTAX RtgTopNodeLgTrkObjOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgTopNodeLgTrkObjOperTable."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex,
rtgTopNodeLgIndex,
rtgTopNodeLgTrkObjIndex }
::= { rtgTopNodeLgTrkObjOperTable 1 }
RtgTopNodeLgTrkObjOperEntry ::= SEQUENCE {
rtgTopNodeLgTrkObjMaxReservableBwOut
Gauge32,
rtgTopNodeLgTrkObjTrunkCost
Unsigned32,
rtgTopNodeLgTrkObjTrunkDelay
Unsigned32,
rtgTopNodeLgTrkObjTrunkSecurity
Unsigned32,
rtgTopNodeLgTrkObjSupportedTrafficTypes
OCTET STRING,
rtgTopNodeLgTrkObjTrunkType
INTEGER,
rtgTopNodeLgTrkObjCustomerParameter
Unsigned32,
rtgTopNodeLgTrkObjFarEndTrmLkInstance
Unsigned32 }
rtgTopNodeLgTrkObjMaxReservableBwOut OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays trunk bandwidth which can be used for
reservations on behalf of connections requiring path oriented
routing. This bandwidth is displayed in bit/s and has been calculated
by concerned trunk path administrator from the trunk bandwidth
and from the percentage of trunk bandwidth provisioned for
reservations by PORS."
::= { rtgTopNodeLgTrkObjOperEntry 1 }
rtgTopNodeLgTrkObjTrunkCost OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays trunk cost metric provisioned as trunkCost
attribute of a concerned trunk path administrator."
::= { rtgTopNodeLgTrkObjOperEntry 2 }
rtgTopNodeLgTrkObjTrunkDelay OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays one-directional trunk delay measured by
trunk during staging. This is half (rounded down to an integer) of
delay displayable by attribute of ID aTrmLinkDelay_c."
::= { rtgTopNodeLgTrkObjOperEntry 3 }
rtgTopNodeLgTrkObjTrunkSecurity OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays trunk security metric provisioned as
trunkSecurity attribute of a concerned trunk path administrator."
::= { rtgTopNodeLgTrkObjOperEntry 4 }
rtgTopNodeLgTrkObjSupportedTrafficTypes OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the type of traffic that can be transmitted on
the trunk. There are eight(8) possible traffic types, and the trunk can
transmit all of them if desired. The voice, data and video traffic
types are defined, and five(5) other traffic types can be defined in
concerned trunk path administrator. This attribute is used in the
route selection process to limit the route to trunks that support the
traffic to be carried by the path.
Description of bits:
voice(0)
data(1)
video(2)
trafficType1(3)
trafficType2(4)
trafficType3(5)
trafficType4(6)
trafficType5(7)"
::= { rtgTopNodeLgTrkObjOperEntry 5 }
rtgTopNodeLgTrkObjTrunkType OBJECT-TYPE
SYNTAX INTEGER {
terrestrial(0),
satellite(1),
trunkType1(2),
trunkType2(3),
trunkType3(4),
trunkType4(5),
trunkType5(6),
trunkType6(7) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute lists the type of the trunk. There can be up to eight(8)
types of trunks. The terrestrial and satellite trunk types have been
defined, leaving six(6) remaining types that can be defined by the
network administration. The set of allowed trunk types for a path is
indicated in the permittedTrunkType attribute of the PLC. When
selecting a route, PORS only chooses trunks whose PA trunkType
are in the permittedTrunkTypes set of the path."
::= { rtgTopNodeLgTrkObjOperEntry 6 }
rtgTopNodeLgTrkObjCustomerParameter OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the customer defined parameter for the
trunk. Its value, a number from zero(0) to seven(7), is chosen by a
network administration to have a meaning specific to their network,
thus allowing them to customize the use of their trunks. A
complementary PLC attribute, requiredCustomerParameter, also has
a value from zero(0) to seven(7). The Route Selector does not
consider trunks whose PA customerParameter is greater than the
requiredCustomParameter of the path."
::= { rtgTopNodeLgTrkObjOperEntry 7 }
rtgTopNodeLgTrkObjFarEndTrmLkInstance OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates identification of the corresponding trunk
providing the reverse direction of transmission."
::= { rtgTopNodeLgTrkObjOperEntry 8 }
rtgTopNodeLgTrkObjUnresTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgTopNodeLgTrkObjUnresEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute displays a table. In the first row there are setup
priorities. In the second row there are numerators of parts of
unreserved bandwidth corresponding to setup priority 0 (first
column) through 4 (fifth column). The denominator is 255."
::= { rtgTopNodeLgTrkObj 234 }
rtgTopNodeLgTrkObjUnresEntry OBJECT-TYPE
SYNTAX RtgTopNodeLgTrkObjUnresEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgTopNodeLgTrkObjUnresTable."
INDEX {
rtgIndex,
rtgTopIndex,
rtgTopNodeIndex,
rtgTopNodeLgIndex,
rtgTopNodeLgTrkObjIndex,
rtgTopNodeLgTrkObjUnresSetupPriorityIndex,
rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex }
::= { rtgTopNodeLgTrkObjUnresTable 1 }
RtgTopNodeLgTrkObjUnresEntry ::= SEQUENCE {
rtgTopNodeLgTrkObjUnresSetupPriorityIndex
INTEGER,
rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex
Integer32,
rtgTopNodeLgTrkObjUnresValue
Unsigned32 }
rtgTopNodeLgTrkObjUnresSetupPriorityIndex OBJECT-TYPE
SYNTAX INTEGER {
bwPartOver255(0) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the next to last index for the
rtgTopNodeLgTrkObjUnresTable."
::= { rtgTopNodeLgTrkObjUnresEntry 1 }
rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex OBJECT-TYPE
SYNTAX Integer32 (0..4)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the final index for the
rtgTopNodeLgTrkObjUnresTable."
::= { rtgTopNodeLgTrkObjUnresEntry 2 }
rtgTopNodeLgTrkObjUnresValue OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgTopNodeLgTrkObjUnresTable."
::= { rtgTopNodeLgTrkObjUnresEntry 3 }
trm OBJECT IDENTIFIER ::= { components 41 }
trmRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
trm components."
::= { trm 1 }
trmRowStatusEntry OBJECT-TYPE
SYNTAX TrmRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
trm component."
INDEX {
trmIndex }
::= { trmRowStatusTable 1 }
TrmRowStatusEntry ::= SEQUENCE {
trmRowStatus
RowStatus,
trmComponentName
DisplayString,
trmStorageType
StorageType,
trmIndex
NonReplicated }
trmRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
trm components.
These components cannot be added nor deleted."
::= { trmRowStatusEntry 1 }
trmComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { trmRowStatusEntry 2 }
trmStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
trm tables."
::= { trmRowStatusEntry 4 }
trmIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the trm tables."
::= { trmRowStatusEntry 10 }
trmLk OBJECT IDENTIFIER ::= { trm 2 }
trmLkRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLkRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLk components."
::= { trmLk 1 }
trmLkRowStatusEntry OBJECT-TYPE
SYNTAX TrmLkRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
trmLk component."
INDEX {
trmIndex,
trmLkIndex }
::= { trmLkRowStatusTable 1 }
TrmLkRowStatusEntry ::= SEQUENCE {
trmLkRowStatus
RowStatus,
trmLkComponentName
DisplayString,
trmLkStorageType
StorageType,
trmLkIndex
Integer32 }
trmLkRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
trmLk components.
These components cannot be added nor deleted."
::= { trmLkRowStatusEntry 1 }
trmLkComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { trmLkRowStatusEntry 2 }
trmLkStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
trmLk tables."
::= { trmLkRowStatusEntry 4 }
trmLkIndex OBJECT-TYPE
SYNTAX Integer32 (1..1023)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the trmLk tables."
::= { trmLkRowStatusEntry 10 }
trmLkOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLkOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Trm Lk/<n> Operational
This group of attributes is used to list links. These links are all
registered with Transport Resource Manager. They have a status
which reflects the current view of the link."
::= { trmLk 10 }
trmLkOperEntry OBJECT-TYPE
SYNTAX TrmLkOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLkOperTable."
INDEX {
trmIndex,
trmLkIndex }
::= { trmLkOperTable 1 }
TrmLkOperEntry ::= SEQUENCE {
trmLkStatus
INTEGER,
trmLkThroughput
Gauge32,
trmLkDelay
Gauge32,
trmLkMaxTxUnit
Unsigned32,
trmLkLinkComponentName
RowPointer,
trmLkDelayUsec
FixedPoint1 }
trmLkStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
joining(2),
online(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if the inactive link is disabled, joining,
waiting to join, or in standby mode.
inactive - The link is known to TRM but is not active. This can
mean that it is disabled, or has not yet started to join.
joining - The link has requested to join the routing systems.
online- The link is active and has joined one or more routing
systems."
::= { trmLkOperEntry 1 }
trmLkThroughput OBJECT-TYPE
SYNTAX Gauge32 (1..640000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the throughput of the link in kbit/s. This
value represents a nominal bandwidth available for connectionless
traffic, after the maximum reserved for path-oriented traffic has
been subtracted from trunk bandwidth. If a trunk speed override is
specified, it is used instead. The 'throughput' value can be
exceeded by connectionless traffic whenever path-oriented traffic is
not using it's reserved bandwidth."
::= { trmLkOperEntry 2 }
trmLkDelay OBJECT-TYPE
SYNTAX Gauge32 (1..1500)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This is the round trip delay of the link in milliseconds. This value
represents a nominal delay for connectionless traffic.
Connectionless traffic is biased away from trunks carrying path-
oriented traffic by increasing this value. The value of this attribute is
a function of the percentage of reserved path-oriented bandwidth
and takes a maximum value of 1500 msec for 100% path-oriented
trunks. If an override delay is specified, it will be used instead."
::= { trmLkOperEntry 3 }
trmLkMaxTxUnit OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum data unit in bytes of this link.
It represents the maximum frame length (including user data and
routing headers) that can be sent on the link."
::= { trmLkOperEntry 4 }
trmLkLinkComponentName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the link's component name. A link is either
a trunk or a gateway to another module. The component name may
be used to obtain additional information from the link system."
::= { trmLkOperEntry 5 }
trmLkDelayUsec OBJECT-TYPE
SYNTAX FixedPoint1 (10..15000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the round trip delay of the link in
milliseconds. This value represents a nominal delay for
connectionless traffic. Connectionless traffic is biased away from
trunks carrying path-oriented traffic by increasing this value. The
value of this attribute is a function of the percentage of reserved
path-oriented bandwidth and takes a maximum value of 1500 msec
for 100% path-oriented trunks. If a delay override is specified, it
will be used instead."
::= { trmLkOperEntry 6 }
trmLkFwdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLkFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is used to display egress statistics collected
by packet forwarding on this link. The statistics can be used to
monitor congestion conditions and packet discards on a link."
::= { trmLk 11 }
trmLkFwdStatsEntry OBJECT-TYPE
SYNTAX TrmLkFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLkFwdStatsTable."
INDEX {
trmIndex,
trmLkIndex }
::= { trmLkFwdStatsTable 1 }
TrmLkFwdStatsEntry ::= SEQUENCE {
trmLkFciSet
Counter32,
trmLkOverflowAttempts
Counter32,
trmLkPathOverflowAttempts
Counter32 }
trmLkFciSet OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the packets whose FCI bits are set by packet
forwarding due to congestion on this link, and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread. This counter wraps around to zero when
the maximum value is reached."
::= { trmLkFwdStatsEntry 1 }
trmLkOverflowAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link in a link group due to
congestion on this link. It is used only when the attribute
forwardingPolicy in component rtg dpn is set to the value
loadspreading. This counter wraps around to zero when the
maximum value is reached."
::= { trmLkFwdStatsEntry 2 }
trmLkPathOverflowAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link group due to
congestion on the link group of this link. This counter wraps around
to zero when the maximum value is reached."
::= { trmLkFwdStatsEntry 3 }
trmLkDiscardCongestedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLkDiscardCongestedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute counts the packets that have been discarded by packet
forwarding due to congestion on this link and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread.
This attribute is a vector with three entries. Each entry corresponds
to a discard priority of the packet. The first entry represents the
discard count of packets with discard priority 1, the second entry
discard priority 2, and the third entry discard priority 3. Each entry
(counter) wraps around to zero when the maximum value is
reached."
::= { trmLk 280 }
trmLkDiscardCongestedEntry OBJECT-TYPE
SYNTAX TrmLkDiscardCongestedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLkDiscardCongestedTable."
INDEX {
trmIndex,
trmLkIndex,
trmLkDiscardCongestedIndex }
::= { trmLkDiscardCongestedTable 1 }
TrmLkDiscardCongestedEntry ::= SEQUENCE {
trmLkDiscardCongestedIndex
INTEGER,
trmLkDiscardCongestedValue
Counter32 }
trmLkDiscardCongestedIndex OBJECT-TYPE
SYNTAX INTEGER {
discardPriority1(0),
discardPriority2(1),
discardPriority3(2) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the trmLkDiscardCongestedTable
specific index for the trmLkDiscardCongestedTable."
::= { trmLkDiscardCongestedEntry 1 }
trmLkDiscardCongestedValue OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
trmLkDiscardCongestedTable."
::= { trmLkDiscardCongestedEntry 2 }
trmLg OBJECT IDENTIFIER ::= { trm 3 }
trmLgRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLg components."
::= { trmLg 1 }
trmLgRowStatusEntry OBJECT-TYPE
SYNTAX TrmLgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
trmLg component."
INDEX {
trmIndex,
trmLgIndex }
::= { trmLgRowStatusTable 1 }
TrmLgRowStatusEntry ::= SEQUENCE {
trmLgRowStatus
RowStatus,
trmLgComponentName
DisplayString,
trmLgStorageType
StorageType,
trmLgIndex
AsciiStringIndex }
trmLgRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
trmLg components.
These components cannot be added nor deleted."
::= { trmLgRowStatusEntry 1 }
trmLgComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { trmLgRowStatusEntry 2 }
trmLgStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
trmLg tables."
::= { trmLgRowStatusEntry 4 }
trmLgIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..12))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the trmLg tables."
::= { trmLgRowStatusEntry 10 }
trmLgLk OBJECT IDENTIFIER ::= { trmLg 2 }
trmLgLkRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgLkRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLgLk components."
::= { trmLgLk 1 }
trmLgLkRowStatusEntry OBJECT-TYPE
SYNTAX TrmLgLkRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
trmLgLk component."
INDEX {
trmIndex,
trmLgIndex,
trmLgLkIndex }
::= { trmLgLkRowStatusTable 1 }
TrmLgLkRowStatusEntry ::= SEQUENCE {
trmLgLkRowStatus
RowStatus,
trmLgLkComponentName
DisplayString,
trmLgLkStorageType
StorageType,
trmLgLkIndex
Integer32 }
trmLgLkRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
trmLgLk components.
These components cannot be added nor deleted."
::= { trmLgLkRowStatusEntry 1 }
trmLgLkComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { trmLgLkRowStatusEntry 2 }
trmLgLkStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
trmLgLk tables."
::= { trmLgLkRowStatusEntry 4 }
trmLgLkIndex OBJECT-TYPE
SYNTAX Integer32 (1..1023)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the trmLgLk tables."
::= { trmLgLkRowStatusEntry 10 }
trmLgLkOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgLkOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Trm Lk/<n> Operational
This group of attributes is used to list links. These links are all
registered with Transport Resource Manager. They have a status
which reflects the current view of the link."
::= { trmLgLk 10 }
trmLgLkOperEntry OBJECT-TYPE
SYNTAX TrmLgLkOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLgLkOperTable."
INDEX {
trmIndex,
trmLgIndex,
trmLgLkIndex }
::= { trmLgLkOperTable 1 }
TrmLgLkOperEntry ::= SEQUENCE {
trmLgLkStatus
INTEGER,
trmLgLkThroughput
Gauge32,
trmLgLkDelay
Gauge32,
trmLgLkMaxTxUnit
Unsigned32,
trmLgLkLinkComponentName
RowPointer,
trmLgLkDelayUsec
FixedPoint1 }
trmLgLkStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
joining(2),
online(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if the inactive link is disabled, joining,
waiting to join, or in standby mode.
inactive - The link is known to TRM but is not active. This can
mean that it is disabled, or has not yet started to join.
joining - The link has requested to join the routing systems.
online- The link is active and has joined one or more routing
systems."
::= { trmLgLkOperEntry 1 }
trmLgLkThroughput OBJECT-TYPE
SYNTAX Gauge32 (1..640000000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the throughput of the link in kbit/s. This
value represents a nominal bandwidth available for connectionless
traffic, after the maximum reserved for path-oriented traffic has
been subtracted from trunk bandwidth. If a trunk speed override is
specified, it is used instead. The 'throughput' value can be
exceeded by connectionless traffic whenever path-oriented traffic is
not using it's reserved bandwidth."
::= { trmLgLkOperEntry 2 }
trmLgLkDelay OBJECT-TYPE
SYNTAX Gauge32 (1..1500)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This is the round trip delay of the link in milliseconds. This value
represents a nominal delay for connectionless traffic.
Connectionless traffic is biased away from trunks carrying path-
oriented traffic by increasing this value. The value of this attribute is
a function of the percentage of reserved path-oriented bandwidth
and takes a maximum value of 1500 msec for 100% path-oriented
trunks. If an override delay is specified, it will be used instead."
::= { trmLgLkOperEntry 3 }
trmLgLkMaxTxUnit OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum data unit in bytes of this link.
It represents the maximum frame length (including user data and
routing headers) that can be sent on the link."
::= { trmLgLkOperEntry 4 }
trmLgLkLinkComponentName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the link's component name. A link is either
a trunk or a gateway to another module. The component name may
be used to obtain additional information from the link system."
::= { trmLgLkOperEntry 5 }
trmLgLkDelayUsec OBJECT-TYPE
SYNTAX FixedPoint1 (10..15000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the round trip delay of the link in
milliseconds. This value represents a nominal delay for
connectionless traffic. Connectionless traffic is biased away from
trunks carrying path-oriented traffic by increasing this value. The
value of this attribute is a function of the percentage of reserved
path-oriented bandwidth and takes a maximum value of 1500 msec
for 100% path-oriented trunks. If a delay override is specified, it
will be used instead."
::= { trmLgLkOperEntry 6 }
trmLgLkFwdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgLkFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is used to display egress statistics collected
by packet forwarding on this link. The statistics can be used to
monitor congestion conditions and packet discards on a link."
::= { trmLgLk 11 }
trmLgLkFwdStatsEntry OBJECT-TYPE
SYNTAX TrmLgLkFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLgLkFwdStatsTable."
INDEX {
trmIndex,
trmLgIndex,
trmLgLkIndex }
::= { trmLgLkFwdStatsTable 1 }
TrmLgLkFwdStatsEntry ::= SEQUENCE {
trmLgLkFciSet
Counter32,
trmLgLkOverflowAttempts
Counter32,
trmLgLkPathOverflowAttempts
Counter32 }
trmLgLkFciSet OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the packets whose FCI bits are set by packet
forwarding due to congestion on this link, and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread. This counter wraps around to zero when
the maximum value is reached."
::= { trmLgLkFwdStatsEntry 1 }
trmLgLkOverflowAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link in a link group due to
congestion on this link. It is used only when the attribute
forwardingPolicy in component rtg dpn is set to the value
loadspreading. This counter wraps around to zero when the
maximum value is reached."
::= { trmLgLkFwdStatsEntry 2 }
trmLgLkPathOverflowAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times DPRS packet forwarding
attempts to overflow packets to another link group due to
congestion on the link group of this link. This counter wraps around
to zero when the maximum value is reached."
::= { trmLgLkFwdStatsEntry 3 }
trmLgLkDiscardCongestedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgLkDiscardCongestedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute counts the packets that have been discarded by packet
forwarding due to congestion on this link and when the
forwardingPolicy attribute of Routing DpnAddressPlan is set to
loadshare or loadspread.
This attribute is a vector with three entries. Each entry corresponds
to a discard priority of the packet. The first entry represents the
discard count of packets with discard priority 1, the second entry
discard priority 2, and the third entry discard priority 3. Each entry
(counter) wraps around to zero when the maximum value is
reached."
::= { trmLgLk 280 }
trmLgLkDiscardCongestedEntry OBJECT-TYPE
SYNTAX TrmLgLkDiscardCongestedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLgLkDiscardCongestedTable."
INDEX {
trmIndex,
trmLgIndex,
trmLgLkIndex,
trmLgLkDiscardCongestedIndex }
::= { trmLgLkDiscardCongestedTable 1 }
TrmLgLkDiscardCongestedEntry ::= SEQUENCE {
trmLgLkDiscardCongestedIndex
INTEGER,
trmLgLkDiscardCongestedValue
Counter32 }
trmLgLkDiscardCongestedIndex OBJECT-TYPE
SYNTAX INTEGER {
discardPriority1(0),
discardPriority2(1),
discardPriority3(2) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the trmLgLkDiscardCongestedTable
specific index for the trmLgLkDiscardCongestedTable."
::= { trmLgLkDiscardCongestedEntry 1 }
trmLgLkDiscardCongestedValue OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
trmLgLkDiscardCongestedTable."
::= { trmLgLkDiscardCongestedEntry 2 }
trmLgLNN OBJECT IDENTIFIER ::= { trmLg 3 }
trmLgLNNRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgLNNRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
trmLgLNN components."
::= { trmLgLNN 1 }
trmLgLNNRowStatusEntry OBJECT-TYPE
SYNTAX TrmLgLNNRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
trmLgLNN component."
INDEX {
trmIndex,
trmLgIndex,
trmLgLNNIndex }
::= { trmLgLNNRowStatusTable 1 }
TrmLgLNNRowStatusEntry ::= SEQUENCE {
trmLgLNNRowStatus
RowStatus,
trmLgLNNComponentName
DisplayString,
trmLgLNNStorageType
StorageType,
trmLgLNNIndex
Integer32 }
trmLgLNNRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
trmLgLNN components.
These components cannot be added nor deleted."
::= { trmLgLNNRowStatusEntry 1 }
trmLgLNNComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { trmLgLNNRowStatusEntry 2 }
trmLgLNNStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
trmLgLNN tables."
::= { trmLgLNNRowStatusEntry 4 }
trmLgLNNIndex OBJECT-TYPE
SYNTAX Integer32 (0..2047)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the trmLgLNN tables."
::= { trmLgLNNRowStatusEntry 10 }
trmLgLNNOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF TrmLgLNNOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Trm Lg/<neighborNodeName> LNN/<logical network number>
Operational
This group of attributes is the information associated with an
address plan."
::= { trmLgLNN 10 }
trmLgLNNOperEntry OBJECT-TYPE
SYNTAX TrmLgLNNOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the trmLgLNNOperTable."
INDEX {
trmIndex,
trmLgIndex,
trmLgLNNIndex }
::= { trmLgLNNOperTable 1 }
TrmLgLNNOperEntry ::= SEQUENCE {
trmLgLNNLinkType
INTEGER,
trmLgLNNAddressPlanComponentName
RowPointer }
trmLgLNNLinkType OBJECT-TYPE
SYNTAX INTEGER {
trunk(0),
internalGateway(1),
externalGateway(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates how the LNN is transported over the link
group. It can be one of three types:
trunk - the LNN is supported by Topology over a Passport to
Passport link
internal gateway - the LNN is supported by an address plan (but not
Topology) over a Passport to Passport link
external gateway - the LNN is supported by an address plan (but not
Topology) over a Passport to non-Passport link"
::= { trmLgLNNOperEntry 1 }
trmLgLNNAddressPlanComponentName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the component name of the address plan
which owns the logical network number of this component."
::= { trmLgLNNOperEntry 2 }
npi OBJECT IDENTIFIER ::= { components 43 }
npiRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
npi components."
::= { npi 1 }
npiRowStatusEntry OBJECT-TYPE
SYNTAX NpiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
npi component."
INDEX {
npiIndex }
::= { npiRowStatusTable 1 }
NpiRowStatusEntry ::= SEQUENCE {
npiRowStatus
RowStatus,
npiComponentName
DisplayString,
npiStorageType
StorageType,
npiIndex
INTEGER }
npiRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
npi components.
These components cannot be added nor deleted."
::= { npiRowStatusEntry 1 }
npiComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { npiRowStatusEntry 2 }
npiStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
npi tables."
::= { npiRowStatusEntry 4 }
npiIndex OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the npi tables."
::= { npiRowStatusEntry 10 }
npiStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpiStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Npi/<x121,e164> Statistics
This group of attributes contains the statistics kept for a particular
numbering plan indicator. The only statistic present is the total
number of DNAs provisioned for the numbering plan."
::= { npi 10 }
npiStatsEntry OBJECT-TYPE
SYNTAX NpiStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the npiStatsTable."
INDEX {
npiIndex }
::= { npiStatsTable 1 }
NpiStatsEntry ::= SEQUENCE {
npiTotalDnas
Unsigned32 }
npiTotalDnas OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute holds the total number of Dnas that are in the
numbering plan. If this attribute is displayed in provisioning mode,
the number includes the Dnas that have been added/deleted in that
provisioning session, otherwise the number only includes the Dnas
that have been activated."
DEFVAL { 0 }
::= { npiStatsEntry 1 }
npiDna OBJECT IDENTIFIER ::= { npi 2 }
npiDnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpiDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
npiDna components."
::= { npiDna 1 }
npiDnaRowStatusEntry OBJECT-TYPE
SYNTAX NpiDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
npiDna component."
INDEX {
npiIndex,
npiDnaIndex }
::= { npiDnaRowStatusTable 1 }
NpiDnaRowStatusEntry ::= SEQUENCE {
npiDnaRowStatus
RowStatus,
npiDnaComponentName
DisplayString,
npiDnaStorageType
StorageType,
npiDnaIndex
DigitString }
npiDnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
npiDna components.
These components cannot be added nor deleted."
::= { npiDnaRowStatusEntry 1 }
npiDnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { npiDnaRowStatusEntry 2 }
npiDnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
npiDna tables."
::= { npiDnaRowStatusEntry 4 }
npiDnaIndex OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the npiDna tables."
::= { npiDnaRowStatusEntry 10 }
npiDnaInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF NpiDnaInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
Npi/<x121,e164> Dna/<BCD(1..15)> Information
This group of attributes contains the attributes for a DNA in the
numbering plan."
::= { npiDna 10 }
npiDnaInfoEntry OBJECT-TYPE
SYNTAX NpiDnaInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the npiDnaInfoTable."
INDEX {
npiIndex,
npiDnaIndex }
::= { npiDnaInfoTable 1 }
NpiDnaInfoEntry ::= SEQUENCE {
npiDnaDestinationName
RowPointer }
npiDnaDestinationName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute holds the Component Name of the application to
which the DNA belongs."
::= { npiDnaInfoEntry 1 }
baseRoutingGroup OBJECT IDENTIFIER ::= { baseRoutingMIB 1 }
baseRoutingGroupBE OBJECT IDENTIFIER ::= { baseRoutingGroup 5 }
baseRoutingGroupBE00 OBJECT IDENTIFIER ::= { baseRoutingGroupBE 1 }
baseRoutingGroupBE00A OBJECT IDENTIFIER ::= { baseRoutingGroupBE00 2 }
baseRoutingCapabilities OBJECT IDENTIFIER ::= { baseRoutingMIB 3 }
baseRoutingCapabilitiesBE OBJECT IDENTIFIER ::= { baseRoutingCapabilities 5 }
baseRoutingCapabilitiesBE00 OBJECT IDENTIFIER ::= { baseRoutingCapabilitiesBE 1 }
baseRoutingCapabilitiesBE00A OBJECT IDENTIFIER ::= { baseRoutingCapabilitiesBE00 2 }
END