Nortel-Magellan-Passport-BaseSnmpMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
IpAddress
FROM RFC1155-SMI
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
TruthValue,
DisplayString,
StorageType,
RowStatus,
Status,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
NonReplicated,
HexString
FROM Nortel-Magellan-Passport-TextualConventionsMIB
vrIndex,
vr
FROM Nortel-Magellan-Passport-VirtualRouterMIB;
baseSnmpMIB OBJECT IDENTIFIER ::= { passportMIBs 36 }
vrSnmp OBJECT IDENTIFIER ::= { vr 8 }
vrSnmpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmp components."
::= { vrSnmp 1 }
vrSnmpRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmp component."
INDEX {
vrIndex,
vrSnmpIndex }
::= { vrSnmpRowStatusTable 1 }
VrSnmpRowStatusEntry ::= SEQUENCE {
vrSnmpRowStatus
RowStatus,
vrSnmpComponentName
DisplayString,
vrSnmpStorageType
StorageType,
vrSnmpIndex
NonReplicated }
vrSnmpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmp components.
These components can be added and deleted."
::= { vrSnmpRowStatusEntry 1 }
vrSnmpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpRowStatusEntry 2 }
vrSnmpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmp tables."
::= { vrSnmpRowStatusEntry 4 }
vrSnmpIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmp tables."
::= { vrSnmpRowStatusEntry 10 }
vrSnmpProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains provisionable attributes defining the SNMP
management entity's capabilities, particularly in regards to
standardV1 and V2 traps."
::= { vrSnmp 20 }
vrSnmpProvEntry OBJECT-TYPE
SYNTAX VrSnmpProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpProvTable."
INDEX {
vrIndex,
vrSnmpIndex }
::= { vrSnmpProvTable 1 }
VrSnmpProvEntry ::= SEQUENCE {
vrSnmpV1EnableAuthenTraps
Status,
vrSnmpV2EnableAuthenTraps
Status,
vrSnmpAlarmsAsTraps
Status,
vrSnmpIpStack
INTEGER,
vrSnmpCidInEntTraps
Status }
vrSnmpV1EnableAuthenTraps OBJECT-TYPE
SYNTAX Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute controls whether the Snmp component will generate
V1 authentication failure traps or not. The attribute is derived from
rfc1213."
::= { vrSnmpProvEntry 1 }
vrSnmpV2EnableAuthenTraps OBJECT-TYPE
SYNTAX Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute controls whether the Snmp component will generate
V2 authentication failure traps or not. The attribute is derived from
rfc1450."
::= { vrSnmpProvEntry 2 }
vrSnmpAlarmsAsTraps OBJECT-TYPE
SYNTAX Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute controls whether the Snmp component will send
Alarms as SNMPv1 and SNMPv2 Traps. If enabled, Alarms will be
sent as SNMPv2 Traps to target Parties identified in
AccessPrivileges components where v2Trap privileges are allowed,
and as SNMPv1 Traps to Managers with v1Trap privileges
allowed."
::= { vrSnmpProvEntry 3 }
vrSnmpIpStack OBJECT-TYPE
SYNTAX INTEGER {
vrIp(1),
ipiFrIpiVc(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute controls which IP stack the Snmp component will use
to send and receive Snmp traffic for Communites and Parties whose
tdomain attribute specifies snmpUdpDomain as the transport
protocol.
If the value of this attribute is vrIp then Snmp Udp traffic will be
sent and received using Ip as provisioned under the VirtualRouter.
This requires provisioning of the ip feature.
If the value of this attribute is ipiFrIpiVc then Snmp Udp traffic
will be sent and received using IpiFr (Ip over Frame Relay) or IpiVc
(Ip over Vc), whichever is provisioned. This requires provisioning
of one of the ipiVc or ipiFr features."
DEFVAL { vrIp }
::= { vrSnmpProvEntry 4 }
vrSnmpCidInEntTraps OBJECT-TYPE
SYNTAX Status
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute controls whether the Customer Identifier (CID) will
be included in the SNMP Enterprise Traps. If enabled, the CID will
be included in the SNMP Enterprise traps."
::= { vrSnmpProvEntry 5 }
vrSnmpStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide."
::= { vrSnmp 21 }
vrSnmpStateEntry OBJECT-TYPE
SYNTAX VrSnmpStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpStateTable."
INDEX {
vrIndex,
vrSnmpIndex }
::= { vrSnmpStateTable 1 }
VrSnmpStateEntry ::= SEQUENCE {
vrSnmpAdminState
INTEGER,
vrSnmpOperationalState
INTEGER,
vrSnmpUsageState
INTEGER,
vrSnmpAvailabilityStatus
OCTET STRING,
vrSnmpProceduralStatus
OCTET STRING,
vrSnmpControlStatus
OCTET STRING,
vrSnmpAlarmStatus
OCTET STRING,
vrSnmpStandbyStatus
INTEGER,
vrSnmpUnknownStatus
INTEGER }
vrSnmpAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { unlocked }
::= { vrSnmpStateEntry 1 }
vrSnmpOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { disabled }
::= { vrSnmpStateEntry 2 }
vrSnmpUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { idle }
::= { vrSnmpStateEntry 3 }
vrSnmpAvailabilityStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)"
::= { vrSnmpStateEntry 4 }
vrSnmpProceduralStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)"
::= { vrSnmpStateEntry 5 }
vrSnmpControlStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)"
::= { vrSnmpStateEntry 6 }
vrSnmpAlarmStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)"
::= { vrSnmpStateEntry 7 }
vrSnmpStandbyStatus OBJECT-TYPE
SYNTAX INTEGER {
hotStandby(0),
coldStandby(1),
providingService(2),
notSet(15) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource."
DEFVAL { notSet }
::= { vrSnmpStateEntry 8 }
vrSnmpUnknownStatus OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure."
DEFVAL { false }
::= { vrSnmpStateEntry 9 }
vrSnmpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains miscellaneous SNMP management
entity operational attributes. Statistics in the group are derived from
rfc 1450 and rfc 1213. Also included in the group are statistics due
to non-SNMP authorization errors, and non-SNMP statistics."
::= { vrSnmp 22 }
vrSnmpStatsEntry OBJECT-TYPE
SYNTAX VrSnmpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpStatsTable."
INDEX {
vrIndex,
vrSnmpIndex }
::= { vrSnmpStatsTable 1 }
VrSnmpStatsEntry ::= SEQUENCE {
vrSnmpLastOrChange
Unsigned32,
vrSnmpTrapsProcessed
Unsigned32,
vrSnmpTrapsDiscarded
Unsigned32,
vrSnmpLastAuthFailure
Unsigned32,
vrSnmpMgrOfLastAuthFailure
IpAddress }
vrSnmpLastOrChange OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the value of sysUpTime (in 1/100's of a
second) at the time of the most recent change to a SNMPv2 Object
Resource entry. The attribute forms part of the SNMPv2 MIB Base
Object Resource Group found in rfc1450."
::= { vrSnmpStatsEntry 1 }
vrSnmpTrapsProcessed OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter contains the cumulative number of Trap Indications
and Alarm Indications received from the DCS Collectors since the
processor last restarted. These Traps and Alarms are sent to
SNMPv1 Managers and SNMPv2 Parties which are configured to
receive Traps. This total includes the number discarded by the Snmp
component when it was locked or disabled."
DEFVAL { 0 }
::= { vrSnmpStatsEntry 2 }
vrSnmpTrapsDiscarded OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This counter contains the cumulative number of Trap Indications
and Alarm Indications discarded since the processor last restarted.
They are discarded when the Snmp component is locked or
disabled."
DEFVAL { 0 }
::= { vrSnmpStatsEntry 3 }
vrSnmpLastAuthFailure OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the value of sysUpTime (in 1/100's of a
second) at the time the last authentication failure. This
attribute is a non-SNMP statistic."
DEFVAL { 0 }
::= { vrSnmpStatsEntry 4 }
vrSnmpMgrOfLastAuthFailure OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the IP address of the manager station that
caused the last authentication failure. This attribute is a non-SNMP
statistic."
DEFVAL { '00000000'H }
::= { vrSnmpStatsEntry 5 }
vrSnmpSys OBJECT IDENTIFIER ::= { vrSnmp 2 }
vrSnmpSysRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpSysRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpSys components."
::= { vrSnmpSys 1 }
vrSnmpSysRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpSysRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpSys component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpSysIndex }
::= { vrSnmpSysRowStatusTable 1 }
VrSnmpSysRowStatusEntry ::= SEQUENCE {
vrSnmpSysRowStatus
RowStatus,
vrSnmpSysComponentName
DisplayString,
vrSnmpSysStorageType
StorageType,
vrSnmpSysIndex
NonReplicated }
vrSnmpSysRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpSys components.
These components cannot be added nor deleted."
::= { vrSnmpSysRowStatusEntry 1 }
vrSnmpSysComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpSysRowStatusEntry 2 }
vrSnmpSysStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpSys tables."
::= { vrSnmpSysRowStatusEntry 4 }
vrSnmpSysIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmpSys tables."
::= { vrSnmpSysRowStatusEntry 10 }
vrSnmpSysProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpSysProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group contains provisionable attributes relating to the SNMP
System Group. The attributes are derived from rfc1213."
::= { vrSnmpSys 10 }
vrSnmpSysProvEntry OBJECT-TYPE
SYNTAX VrSnmpSysProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpSysProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpSysIndex }
::= { vrSnmpSysProvTable 1 }
VrSnmpSysProvEntry ::= SEQUENCE {
vrSnmpSysContact
AsciiString,
vrSnmpSysName
AsciiString,
vrSnmpSysLocation
AsciiString }
vrSnmpSysContact OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute identifies the contact person for this managed node,
together with information on how to contact this person."
::= { vrSnmpSysProvEntry 1 }
vrSnmpSysName OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute identifies the administratively assigned name for this
managed node. By convention, it is the node's fully qualified
domain name."
::= { vrSnmpSysProvEntry 2 }
vrSnmpSysLocation OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute identifies the physical location of this node. For
example, 'telephone closet, third floor'."
::= { vrSnmpSysProvEntry 3 }
vrSnmpSysOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpSysOpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group contains operational attributes relating to the SNMP
System Group. The attributes are derived from rfc1213."
::= { vrSnmpSys 11 }
vrSnmpSysOpEntry OBJECT-TYPE
SYNTAX VrSnmpSysOpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpSysOpTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpSysIndex }
::= { vrSnmpSysOpTable 1 }
VrSnmpSysOpEntry ::= SEQUENCE {
vrSnmpSysDescription
AsciiString,
vrSnmpSysObjectId
OBJECT IDENTIFIER,
vrSnmpSysUpTime
Unsigned32,
vrSnmpSysServices
Unsigned32 }
vrSnmpSysDescription OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute presents a textual description of the entity. This value
should include the full name and version identification of the
system's hardware type, software operating-system, and networking
software."
::= { vrSnmpSysOpEntry 1 }
vrSnmpSysObjectId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute identifies the vendor's authoritative identification of
the network management subsystem contained in the entity. This
value is allocated within the Structure of Management Information
(SMI) enterprises subtree (1.3.6.1.4.1) and provides an easy and
unambiguous means for determining 'what kind of box' is being
managed."
::= { vrSnmpSysOpEntry 2 }
vrSnmpSysUpTime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the time (in hundredths of a second) since
the network management portion of the system was last re-
initialized."
::= { vrSnmpSysOpEntry 3 }
vrSnmpSysServices OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the set of services that this entity primarily
offers.
The value is a sum. This sum initially takes the value zero, then, for
each layer, L, in the range 1 through 7, that this node performs
transactions for, 2 raised to (L-1) is added to the sum. For example,
a node which performs primarily routing functions would have a
value of 4 (2^(3-1)). In contrast, a node which is a host offering
application services would have a value of 72 ((2^4-1) + 2^(7-1)).
Note that in the context of the Internet suite of protocols, values
should be calculated accordingly:
layer 1 - physical (for example, repeaters)
layer 2 - datalink/subnetwork (for example, bridges)
layer 3 - internet (for example, IP gateways)
layer 4 - end-to-end (for example, IP hosts)
layer 7 - applications (for example, mail relays)
For systems including OSI protocols, layers 5 and 6 may also be
counted."
DEFVAL { 6 }
::= { vrSnmpSysOpEntry 4 }
vrSnmpCom OBJECT IDENTIFIER ::= { vrSnmp 3 }
vrSnmpComRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpComRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpCom components."
::= { vrSnmpCom 1 }
vrSnmpComRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpComRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpCom component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpComIndex }
::= { vrSnmpComRowStatusTable 1 }
VrSnmpComRowStatusEntry ::= SEQUENCE {
vrSnmpComRowStatus
RowStatus,
vrSnmpComComponentName
DisplayString,
vrSnmpComStorageType
StorageType,
vrSnmpComIndex
Integer32 }
vrSnmpComRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpCom components.
These components can be added and deleted."
::= { vrSnmpComRowStatusEntry 1 }
vrSnmpComComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpComRowStatusEntry 2 }
vrSnmpComStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpCom tables."
::= { vrSnmpComRowStatusEntry 4 }
vrSnmpComIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmpCom tables."
::= { vrSnmpComRowStatusEntry 10 }
vrSnmpComProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpComProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group contains provisionable attributes relating to SNMPv1
Communities."
::= { vrSnmpCom 10 }
vrSnmpComProvEntry OBJECT-TYPE
SYNTAX VrSnmpComProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpComProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpComIndex }
::= { vrSnmpComProvTable 1 }
VrSnmpComProvEntry ::= SEQUENCE {
vrSnmpComCommunityString
AsciiString,
vrSnmpComAccessMode
INTEGER,
vrSnmpComViewIndex
Unsigned32,
vrSnmpComTDomain
INTEGER }
vrSnmpComCommunityString OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is the SNMPv1 Community name. The value of this
attribute is used to authenticate SNMP messages received from
SNMPv1 management entities, and is placed in SNMP messages
sent out by the SNMPv1 network management entity. The string
'public' is commonly used.
When an SNMPv1 message is received, the community name in the
message is checked to ensure that it matches a Community string. If
there are no Manager subcomponents for that Community then the
level of access is determined by the accessMode attribute. If there
are Manager subcomponents for the Community then the
originating transport address in the message must match the
transportAddress of one of the Manager subcomponents, and the
level of access of the sending entity is determined by the privileges
attribute for that Manager.
The combination of communityString and tDomain attributes must
be unique across all Communies."
DEFVAL { '7075626c6963'H }
::= { vrSnmpComProvEntry 1 }
vrSnmpComAccessMode OBJECT-TYPE
SYNTAX INTEGER {
readOnly(1),
readWrite(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Once the sending SNMP entity is authenticated as a member of a
community, the community access mode determines what level of
access it has for each object in its view."
DEFVAL { readOnly }
::= { vrSnmpComProvEntry 3 }
vrSnmpComViewIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The community view index selects an entry in the SnmpViewTable
that this community will use. This index must correspond to the first
index of one of the SnmpView entries. Note that SNMPv2 Views are
used for SNMPv1 communities, as the SNMPv2 View model is
sufficiently general to handle the SNMPv1 case."
::= { vrSnmpComProvEntry 4 }
vrSnmpComTDomain OBJECT-TYPE
SYNTAX INTEGER {
snmpUdpDomain(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the kind of transport service by which the
community receives and sends network management traffic.
The combination of communityString and tDomain attributes must
be unique across all Communies"
DEFVAL { snmpUdpDomain }
::= { vrSnmpComProvEntry 5 }
vrSnmpComMan OBJECT IDENTIFIER ::= { vrSnmpCom 2 }
vrSnmpComManRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpComManRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpComMan components."
::= { vrSnmpComMan 1 }
vrSnmpComManRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpComManRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpComMan component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpComIndex,
vrSnmpComManIndex }
::= { vrSnmpComManRowStatusTable 1 }
VrSnmpComManRowStatusEntry ::= SEQUENCE {
vrSnmpComManRowStatus
RowStatus,
vrSnmpComManComponentName
DisplayString,
vrSnmpComManStorageType
StorageType,
vrSnmpComManIndex
Integer32 }
vrSnmpComManRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpComMan components.
These components can be added and deleted."
::= { vrSnmpComManRowStatusEntry 1 }
vrSnmpComManComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpComManRowStatusEntry 2 }
vrSnmpComManStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpComMan tables."
::= { vrSnmpComManRowStatusEntry 4 }
vrSnmpComManIndex OBJECT-TYPE
SYNTAX Integer32 (0..100)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmpComMan tables."
::= { vrSnmpComManRowStatusEntry 10 }
vrSnmpComManProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpComManProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group contains provisionable attributes relating to an SNMPv1
Community Manager."
::= { vrSnmpComMan 10 }
vrSnmpComManProvEntry OBJECT-TYPE
SYNTAX VrSnmpComManProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpComManProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpComIndex,
vrSnmpComManIndex }
::= { vrSnmpComManProvTable 1 }
VrSnmpComManProvEntry ::= SEQUENCE {
vrSnmpComManTransportAddress
AsciiString,
vrSnmpComManPrivileges
OCTET STRING }
vrSnmpComManTransportAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..100))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is the transport service address of SNMPv1 Manager,
formatted according to the value of SnmpV1Community tDomain.
The only currently supported format is that of a UDP Transport
Address. It must be of the form 'IpAddress-UDP Port', where UDP
Port = 162. For example, 23.45.67.89-162 is a suitable UDP
Transport Address.
The value of transportAddress must be unique for all Manager
components under the same Community."
::= { vrSnmpComManProvEntry 1 }
vrSnmpComManPrivileges OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute identifies the access privileges which govern what
management operations the SNMPv1 Manager may perform.
v1trap operations are only allowed if the Community accessMode is
readOnly or readWrite.
set operations are only allowed if the Community accessMode is
readWrite.
get operations are only allowed if the Community accessMode is
readOnly or readWrite.
Description of bits:
sets(0)
gets(1)
v1trap(2)"
DEFVAL { '40'H }
::= { vrSnmpComManProvEntry 2 }
vrSnmpAcl OBJECT IDENTIFIER ::= { vrSnmp 4 }
vrSnmpAclRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpAclRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpAcl components."
::= { vrSnmpAcl 1 }
vrSnmpAclRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpAclRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A single entry in the table represents a single
vrSnmpAcl component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpAclTargetIndex,
vrSnmpAclSubjectIndex,
vrSnmpAclResourcesIndex }
::= { vrSnmpAclRowStatusTable 1 }
VrSnmpAclRowStatusEntry ::= SEQUENCE {
vrSnmpAclRowStatus
RowStatus,
vrSnmpAclComponentName
DisplayString,
vrSnmpAclStorageType
StorageType,
vrSnmpAclTargetIndex
Integer32,
vrSnmpAclSubjectIndex
Integer32,
vrSnmpAclResourcesIndex
Integer32 }
vrSnmpAclRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpAcl components.
These components can be added and deleted."
::= { vrSnmpAclRowStatusEntry 1 }
vrSnmpAclComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpAclRowStatusEntry 2 }
vrSnmpAclStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpAcl tables."
::= { vrSnmpAclRowStatusEntry 4 }
vrSnmpAclTargetIndex OBJECT-TYPE
SYNTAX Integer32 (1..2048)
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents an index for the vrSnmpAcl tables."
::= { vrSnmpAclRowStatusEntry 10 }
vrSnmpAclSubjectIndex OBJECT-TYPE
SYNTAX Integer32 (1..2048)
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents an index for the vrSnmpAcl tables."
::= { vrSnmpAclRowStatusEntry 11 }
vrSnmpAclResourcesIndex OBJECT-TYPE
SYNTAX Integer32 (1..2048)
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents an index for the vrSnmpAcl tables."
::= { vrSnmpAclRowStatusEntry 12 }
vrSnmpAclProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpAclProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This group contains provisionable attributes relating to SNMPv2
Access Privilege Table Entries. The provisionable attributes are
derived from rfc1445, and rfc1447."
::= { vrSnmpAcl 10 }
vrSnmpAclProvEntry OBJECT-TYPE
SYNTAX VrSnmpAclProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vrSnmpAclProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpAclTargetIndex,
vrSnmpAclSubjectIndex,
vrSnmpAclResourcesIndex }
::= { vrSnmpAclProvTable 1 }
VrSnmpAclProvEntry ::= SEQUENCE {
vrSnmpAclPrivileges
OCTET STRING,
vrSnmpAclRowStorageType
INTEGER,
vrSnmpAclStdRowStatus
INTEGER }
vrSnmpAclPrivileges OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute identifies the access privileges which govern what
management operations a particular target part may perform with
respect to a particular SNMPv2 context when requested by a
particular subject party. Gets and set operations are only permitted
if the target Party is local (SnmpV2PartyEntryProv local = true).
Response and v2trap operations are only permitted if the target
Party is non-local (SnmpV2PartyEntryProv local = false).
Description of bits:
response(0)
set(1)
gets(2)
v2trap(3)"
DEFVAL { '60'H }
::= { vrSnmpAclProvEntry 1 }
vrSnmpAclRowStorageType OBJECT-TYPE
SYNTAX INTEGER {
nonVolatile(3) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates the storage type for this conceptual row in
the SNMPv2 aclTable. This is a constant - nonVolatile."
DEFVAL { nonVolatile }
::= { vrSnmpAclProvEntry 2 }
vrSnmpAclStdRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates the status of this conceptual row in the
SNMPv2 aclTable. This is a constant - active."
DEFVAL { active }
::= { vrSnmpAclProvEntry 3 }
vrSnmpParty OBJECT IDENTIFIER ::= { vrSnmp 5 }
vrSnmpPartyRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpPartyRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpParty components."
::= { vrSnmpParty 1 }
vrSnmpPartyRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpPartyRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A single entry in the table represents a single
vrSnmpParty component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpPartyIdentityIndex }
::= { vrSnmpPartyRowStatusTable 1 }
VrSnmpPartyRowStatusEntry ::= SEQUENCE {
vrSnmpPartyRowStatus
RowStatus,
vrSnmpPartyComponentName
DisplayString,
vrSnmpPartyStorageType
StorageType,
vrSnmpPartyIdentityIndex
OBJECT IDENTIFIER }
vrSnmpPartyRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpParty components.
These components can be added and deleted."
::= { vrSnmpPartyRowStatusEntry 1 }
vrSnmpPartyComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpPartyRowStatusEntry 2 }
vrSnmpPartyStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpParty tables."
::= { vrSnmpPartyRowStatusEntry 4 }
vrSnmpPartyIdentityIndex OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents the index for the vrSnmpParty tables."
::= { vrSnmpPartyRowStatusEntry 10 }
vrSnmpPartyProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpPartyProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This group contains provisionable attributes relating to SNMPv2
Party Table Entries.The attributes are derived from rfc1321,
rfc1445, rfc1446, rfc1447, and rfc1450."
::= { vrSnmpParty 10 }
vrSnmpPartyProvEntry OBJECT-TYPE
SYNTAX VrSnmpPartyProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vrSnmpPartyProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpPartyIdentityIndex }
::= { vrSnmpPartyProvTable 1 }
VrSnmpPartyProvEntry ::= SEQUENCE {
vrSnmpPartyStdIndex
Unsigned32,
vrSnmpPartyTDomain
INTEGER,
vrSnmpPartyTransportAddress
AsciiString,
vrSnmpPartyMaxMessageSize
Unsigned32,
vrSnmpPartyLocal
TruthValue,
vrSnmpPartyAuthProtocol
INTEGER,
vrSnmpPartyAuthPrivate
HexString,
vrSnmpPartyAuthPublic
HexString,
vrSnmpPartyAuthLifetime
Unsigned32,
vrSnmpPartyPrivProtocol
INTEGER,
vrSnmpPartyRowStorageType
INTEGER,
vrSnmpPartyStdRowStatus
INTEGER }
vrSnmpPartyStdIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2048)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the SNMPv2 Party table partyIndex. This
index is unique and its value is automatically selected for you."
::= { vrSnmpPartyProvEntry 1 }
vrSnmpPartyTDomain OBJECT-TYPE
SYNTAX INTEGER {
snmpUdpDomain(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates the kind of transport service by which the
party receives and sends network management traffic."
DEFVAL { snmpUdpDomain }
::= { vrSnmpPartyProvEntry 2 }
vrSnmpPartyTransportAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..100))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute is the transport service address by which the party
receives network management traffic, formatted according to the
corresponding value of tDomain.
For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this
is the address of the Virtual Router.
For non-local (Manager) Parties (SnmpV2PartyEntryProv local =
false) this is the address of the SNMP Manager.
The only currently supported format is that of a UDP Transport
Address. It must be of the form 'IpAddress-UDP Port', where UDP
Port = 161 for a local Party and UDP Port = 162 for a non-local
Party. For example, 23.45.67.89-161 or 23.45.67.89-162 are suitable
UDP Transport Addresses."
::= { vrSnmpPartyProvEntry 3 }
vrSnmpPartyMaxMessageSize OBJECT-TYPE
SYNTAX Unsigned32 (484..65507)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute is the maximum length in octets of a SNMPv2
message that this party will accept. For local (Agent) Parties
(SnmpV2PartyEntryProv local = true) this cannot be set to greater
than the fixed Agent maximum of 1400. For non-local (Manager)
Parties (SnmpV2PartyEntryProv local = false) the maximum is
65507."
DEFVAL { 1400 }
::= { vrSnmpPartyProvEntry 4 }
vrSnmpPartyLocal OBJECT-TYPE
SYNTAX TruthValue
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates whether this party executes at this SNMPv2
entity. If this attribute has a value of true, then the SNMPv2 entity
is an Agent, and will listen for SNMPv2 messages on the ipAddress
associated with this party. If this attribute has the value false, then
the SNMPv2 entity is a Manager."
::= { vrSnmpPartyProvEntry 5 }
vrSnmpPartyAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
noAuth(1),
v2Md5AuthProtocol(4) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates the authentication protocol by which all
messages generated by the party are authenticated as to origin and
integrity. The value noAuth signifies that messages generated by the
party are not authenticated."
DEFVAL { noAuth }
::= { vrSnmpPartyProvEntry 6 }
vrSnmpPartyAuthPrivate OBJECT-TYPE
SYNTAX HexString (SIZE (0..16))
ACCESS write-only
STATUS obsolete
DESCRIPTION
"This attribute is the Party's private authentication key. As with
passwords this attribute cannot be displayed by the display
command and is stored in encoded form. For Parties with an
authentication protocol, this key must be provisioned."
DEFVAL { ''H }
::= { vrSnmpPartyProvEntry 7 }
vrSnmpPartyAuthPublic OBJECT-TYPE
SYNTAX HexString (SIZE (0..16))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute is the Party's public authentication key. It is the
'public information' used by the Party's authentication protocol."
DEFVAL { ''H }
::= { vrSnmpPartyProvEntry 8 }
vrSnmpPartyAuthLifetime OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute represents the maximum acceptable delivery delay
(lifetime) in seconds for messages from this Party."
DEFVAL { 300 }
::= { vrSnmpPartyProvEntry 9 }
vrSnmpPartyPrivProtocol OBJECT-TYPE
SYNTAX INTEGER {
noPriv(2) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute identifies the privacy protocol by which all protocol
messages received by the party are protected from disclosure. The
value noPriv signifies that messages received by the party are not
protected. As DES is not supported, this is a constant noPriv."
DEFVAL { noPriv }
::= { vrSnmpPartyProvEntry 10 }
vrSnmpPartyRowStorageType OBJECT-TYPE
SYNTAX INTEGER {
nonVolatile(3) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"The attribute indicates the storage type for this conceptual row in
the SNMPv2 aclTable. This is a constant - nonVolatile."
DEFVAL { nonVolatile }
::= { vrSnmpPartyProvEntry 11 }
vrSnmpPartyStdRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates the status of this conceptual row in the
SNMPv2 partyTable. This is a constant - active."
DEFVAL { active }
::= { vrSnmpPartyProvEntry 12 }
vrSnmpPartyOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpPartyOpEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This group contains Operational Attributes relating SNMPv2
parties. based upon rfc1321, rfc1445, rfc1446, rfc1447, and
rfc1450."
::= { vrSnmpParty 11 }
vrSnmpPartyOpEntry OBJECT-TYPE
SYNTAX VrSnmpPartyOpEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vrSnmpPartyOpTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpPartyIdentityIndex }
::= { vrSnmpPartyOpTable 1 }
VrSnmpPartyOpEntry ::= SEQUENCE {
vrSnmpPartyTrapNumbers
Unsigned32,
vrSnmpPartyAuthClock
Unsigned32 }
vrSnmpPartyTrapNumbers OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute is a count of the total number of SNMPv2 traps sent
to a SNMPv2 non-Local (Manager) party (SnmpV2PartyEntryProv
local = false). This counter is never incremented for Local (Agent)
parties (SnmpV2PartyEntryProv local = true)."
DEFVAL { 0 }
::= { vrSnmpPartyOpEntry 1 }
vrSnmpPartyAuthClock OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute is the authentication clock which represents the notion
of current time specific to a Party. This value is not permitted to
'roll-over'. In other words once it reaches the maximum it stays
there, unless explicitly decremented."
DEFVAL { 0 }
::= { vrSnmpPartyOpEntry 2 }
vrSnmpCon OBJECT IDENTIFIER ::= { vrSnmp 6 }
vrSnmpConRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpConRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpCon components."
::= { vrSnmpCon 1 }
vrSnmpConRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpConRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A single entry in the table represents a single
vrSnmpCon component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpConIdentityIndex }
::= { vrSnmpConRowStatusTable 1 }
VrSnmpConRowStatusEntry ::= SEQUENCE {
vrSnmpConRowStatus
RowStatus,
vrSnmpConComponentName
DisplayString,
vrSnmpConStorageType
StorageType,
vrSnmpConIdentityIndex
OBJECT IDENTIFIER }
vrSnmpConRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpCon components.
These components can be added and deleted."
::= { vrSnmpConRowStatusEntry 1 }
vrSnmpConComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpConRowStatusEntry 2 }
vrSnmpConStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpCon tables."
::= { vrSnmpConRowStatusEntry 4 }
vrSnmpConIdentityIndex OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents the index for the vrSnmpCon tables."
::= { vrSnmpConRowStatusEntry 10 }
vrSnmpConProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpConProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This group contains provisionable attributes relating to SNMPv2
Contexts Table Entries. The attributes are derived from rfc1445, and
rfc1447."
::= { vrSnmpCon 10 }
vrSnmpConProvEntry OBJECT-TYPE
SYNTAX VrSnmpConProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vrSnmpConProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpConIdentityIndex }
::= { vrSnmpConProvTable 1 }
VrSnmpConProvEntry ::= SEQUENCE {
vrSnmpConStdIndex
Unsigned32,
vrSnmpConLocal
INTEGER,
vrSnmpConViewIndex
Unsigned32,
vrSnmpConLocalTime
INTEGER,
vrSnmpConRowStorageType
INTEGER,
vrSnmpConStdRowStatus
INTEGER }
vrSnmpConStdIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the SNMPv2 Contexts table contextIndex.
This index is unique and its value is automatically selected for you."
::= { vrSnmpConProvEntry 1 }
vrSnmpConLocal OBJECT-TYPE
SYNTAX INTEGER {
true(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates whether this context is realized by this
SNMPv2 entity. This is a constant - true."
DEFVAL { true }
::= { vrSnmpConProvEntry 2 }
vrSnmpConViewIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"The SNMPv2 Contexts view index selects a particular MIB view
entry in the SNMPv2 viewTable. This index must correspond to the
first replication index (index) of one of the entries in the SnmpView.
The value of the localTime attribute provides further information on
the temporal domain of the MIB view."
::= { vrSnmpConProvEntry 3 }
vrSnmpConLocalTime OBJECT-TYPE
SYNTAX INTEGER {
currentTime(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute identifies the temporal context of the management
information in the MIB view identified by the viewIndex attribute.
This is a constant - currentTime. The SNMPv2 alternatives
restartTime and cacheTime are not currently supported."
DEFVAL { currentTime }
::= { vrSnmpConProvEntry 4 }
vrSnmpConRowStorageType OBJECT-TYPE
SYNTAX INTEGER {
nonVolatile(3) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"The attribute indicates the storage type for this conceptual row in
the SNMPv2 contextTable. This is a constant - nonVolatile."
DEFVAL { nonVolatile }
::= { vrSnmpConProvEntry 5 }
vrSnmpConStdRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute indicates the status of this conceptual row in the
SNMPv2 aclTable. This is a constant - active."
DEFVAL { active }
::= { vrSnmpConProvEntry 6 }
vrSnmpView OBJECT IDENTIFIER ::= { vrSnmp 7 }
vrSnmpViewRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpViewRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpView components."
::= { vrSnmpView 1 }
vrSnmpViewRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpViewRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpView component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpViewIndex,
vrSnmpViewSubtreeIndex }
::= { vrSnmpViewRowStatusTable 1 }
VrSnmpViewRowStatusEntry ::= SEQUENCE {
vrSnmpViewRowStatus
RowStatus,
vrSnmpViewComponentName
DisplayString,
vrSnmpViewStorageType
StorageType,
vrSnmpViewIndex
Integer32,
vrSnmpViewSubtreeIndex
OBJECT IDENTIFIER }
vrSnmpViewRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpView components.
These components can be added and deleted."
::= { vrSnmpViewRowStatusEntry 1 }
vrSnmpViewComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpViewRowStatusEntry 2 }
vrSnmpViewStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpView tables."
::= { vrSnmpViewRowStatusEntry 4 }
vrSnmpViewIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the vrSnmpView tables."
::= { vrSnmpViewRowStatusEntry 10 }
vrSnmpViewSubtreeIndex OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents an index for the vrSnmpView tables."
::= { vrSnmpViewRowStatusEntry 11 }
vrSnmpViewProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpViewProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains provisionable attributes relating to SNMPv2
View Table SubTrees. The attributes are derived from rfc1445, and
rfc1447."
::= { vrSnmpView 10 }
vrSnmpViewProvEntry OBJECT-TYPE
SYNTAX VrSnmpViewProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpViewProvTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpViewIndex,
vrSnmpViewSubtreeIndex }
::= { vrSnmpViewProvTable 1 }
VrSnmpViewProvEntry ::= SEQUENCE {
vrSnmpViewMask
HexString,
vrSnmpViewType
INTEGER,
vrSnmpViewRowStorageType
INTEGER,
vrSnmpViewStdRowStatus
INTEGER }
vrSnmpViewMask OBJECT-TYPE
SYNTAX HexString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is the View mask which, in combination with the
corresponding instance of SnmpView subTree, defines a family of
view subtrees.
Each bit of this bit mask corresponds to a subindentifier of
SnmpView subTree, with the most significant bit of the i-th octet of
this octet string value (extended if necessary, see below)
corresponding to the (8*i - 7)-th sub-identifier, and the least
significant bit of the i-th octet of this octet string corresponding to
the (8*i)-th sub-identifier, where i is in the range 1 through 16.
Each bit of this bit mask specifies whether or not the corresponding
sub-identifiers must match when determining if an OBJECT
IDENTIFIER is in this family of view subtrees; a '1' indicates that
an exact match must occur; a '0' indicates 'wild card', meaning that
any sub-identifier value matches.
Thus, the OBJECT IDENTIFIER X of an object instance is
contained in a family of view subtrees if the following criteria are
met:
For each sub-identifier of the value of SnmpView subTree, either the
i-th bit of mask is 0, or the i-th sub-identifier of X is equal to the i-th
sub-identifier of the value of SnmpView subTree.
If the value of this bit mask is M bits long and there are more than
M sub-identifiers in the corresponding instance of SnmpView
subTree, then the bit mask is extended with 1's to be the required
length.
Note that when the value of this object is the zero-length string, this
extension rule results in a mask of all 1's being used (no wild card)
and the family of SnmpView subTrees is the one snmpView subTree
uniquely identified by the corresponding instance of subTree."
DEFVAL { ''H }
::= { vrSnmpViewProvEntry 1 }
vrSnmpViewType OBJECT-TYPE
SYNTAX INTEGER {
includedSubtree(1),
excludedSubtree(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the particular family of view
subtrees is included or excluded in the SNMPv2 context's (or
SNMPv1 community's) MIB view.
The value 'includedSubtree' indicates that the corresponding
instances of subTree and mask define a family of view subtrees
included in the MIB view.
The value 'excludedSubtree' indicates that the corresponding
instances of subTree and mask define a family of view subtrees
excluded in the MIB view."
DEFVAL { includedSubtree }
::= { vrSnmpViewProvEntry 2 }
vrSnmpViewRowStorageType OBJECT-TYPE
SYNTAX INTEGER {
nonVolatile(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The attribute indicates the storage type for this conceptual row in
the SNMPv2 viewTable. This is a constant - nonVolatile."
DEFVAL { nonVolatile }
::= { vrSnmpViewProvEntry 3 }
vrSnmpViewStdRowStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the status of this conceptual row in the
SNMPv2 snmpViewTable. This is a constant - active."
DEFVAL { active }
::= { vrSnmpViewProvEntry 4 }
vrSnmpOr OBJECT IDENTIFIER ::= { vrSnmp 8 }
vrSnmpOrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpOrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpOr components."
::= { vrSnmpOr 1 }
vrSnmpOrRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpOrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpOr component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpOrIndex }
::= { vrSnmpOrRowStatusTable 1 }
VrSnmpOrRowStatusEntry ::= SEQUENCE {
vrSnmpOrRowStatus
RowStatus,
vrSnmpOrComponentName
DisplayString,
vrSnmpOrStorageType
StorageType,
vrSnmpOrIndex
Integer32 }
vrSnmpOrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpOr components.
These components cannot be added nor deleted."
::= { vrSnmpOrRowStatusEntry 1 }
vrSnmpOrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpOrRowStatusEntry 2 }
vrSnmpOrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpOr tables."
::= { vrSnmpOrRowStatusEntry 4 }
vrSnmpOrIndex OBJECT-TYPE
SYNTAX Integer32 (1..1024)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmpOr tables."
::= { vrSnmpOrRowStatusEntry 10 }
vrSnmpOrOrTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpOrOrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The attributes of this group describe a MIB currently supported by
the SNMP agent. SNMP managers make use of these entries to
determine what is supported. The group is derived from rfc 1450."
::= { vrSnmpOr 10 }
vrSnmpOrOrEntry OBJECT-TYPE
SYNTAX VrSnmpOrOrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpOrOrTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpOrIndex }
::= { vrSnmpOrOrTable 1 }
VrSnmpOrOrEntry ::= SEQUENCE {
vrSnmpOrId
OBJECT IDENTIFIER,
vrSnmpOrDescr
AsciiString }
vrSnmpOrId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the authoritative identification of a
dynamically-configurable management entity object resource. This
is a MIB Object Identifier."
::= { vrSnmpOrOrEntry 2 }
vrSnmpOrDescr OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the textual description of a dynamically-
configurable management entity object resource. This is an ASCII
description of a supported MIB."
::= { vrSnmpOrOrEntry 3 }
vrSnmpV2Stats OBJECT IDENTIFIER ::= { vrSnmp 9 }
vrSnmpV2StatsRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpV2StatsRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpV2Stats components."
::= { vrSnmpV2Stats 1 }
vrSnmpV2StatsRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpV2StatsRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A single entry in the table represents a single
vrSnmpV2Stats component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpV2StatsIndex }
::= { vrSnmpV2StatsRowStatusTable 1 }
VrSnmpV2StatsRowStatusEntry ::= SEQUENCE {
vrSnmpV2StatsRowStatus
RowStatus,
vrSnmpV2StatsComponentName
DisplayString,
vrSnmpV2StatsStorageType
StorageType,
vrSnmpV2StatsIndex
NonReplicated }
vrSnmpV2StatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpV2Stats components.
These components cannot be added nor deleted."
::= { vrSnmpV2StatsRowStatusEntry 1 }
vrSnmpV2StatsComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpV2StatsRowStatusEntry 2 }
vrSnmpV2StatsStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpV2Stats tables."
::= { vrSnmpV2StatsRowStatusEntry 4 }
vrSnmpV2StatsIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents the index for the vrSnmpV2Stats tables."
::= { vrSnmpV2StatsRowStatusEntry 10 }
vrSnmpV2StatsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpV2StatsStatsEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This attribute group contains the collection of statistics as defined
by SNMPv2 providing basic instrumentation of a SNMPv2 Agent.
The group is derived from rfc 1450. As the implementation is fully
bilingual in regards to Snmp V2/V1, statistics which apply only to
unilingual V2 Agents do not appear as attributes. Similarly as
privacy protocols are not supported, the relevant statistics have no
corresponding attributes."
::= { vrSnmpV2Stats 10 }
vrSnmpV2StatsStatsEntry OBJECT-TYPE
SYNTAX VrSnmpV2StatsStatsEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vrSnmpV2StatsStatsTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpV2StatsIndex }
::= { vrSnmpV2StatsStatsTable 1 }
VrSnmpV2StatsStatsEntry ::= SEQUENCE {
vrSnmpV2StatsPackets
Unsigned32,
vrSnmpV2StatsEncodingErrors
Unsigned32,
vrSnmpV2StatsUnknownSrcParties
Unsigned32,
vrSnmpV2StatsBadAuths
Unsigned32,
vrSnmpV2StatsNotInLifetime
Unsigned32,
vrSnmpV2StatsWrongDigestValues
Unsigned32,
vrSnmpV2StatsUnknownContexts
Unsigned32,
vrSnmpV2StatsBadOperations
Unsigned32,
vrSnmpV2StatsSilentDrops
Unsigned32 }
vrSnmpV2StatsPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMP messages
received by the SNMP management entity from the transport
service. This has the same value as inPackets in the
SnmpMibIIStatsOp group."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 1 }
vrSnmpV2StatsEncodingErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMP messages
received by the SNMP management entity which were improperly
BER encoded or had an invalid ASN.1 syntax. This has the same
value as inAsnParseErrs in the SnmpMibIIStatsOp group."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 2 }
vrSnmpV2StatsUnknownSrcParties OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity for which the message
source Party was not locally recognized."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 3 }
vrSnmpV2StatsBadAuths OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity for which the message
authentication protocol did not match that of the local source Party."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 4 }
vrSnmpV2StatsNotInLifetime OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity for which the message
source TimeStamp was less than the combination of the local source
Party's clock and lifetime."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 5 }
vrSnmpV2StatsWrongDigestValues OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity for which the message
authentication Digest Value was invalid."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 6 }
vrSnmpV2StatsUnknownContexts OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity for which the message
Context was not locally known."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 7 }
vrSnmpV2StatsBadOperations OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity for which the PDU type
was not allowed in the local Access Privileges Entry."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 8 }
vrSnmpV2StatsSilentDrops OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute represents the total number of SNMPv2 messages
received by the SNMP management entity which were silently
ignored because an alternate response message was greater than a
local constraint or greater than the maximum message size allowed
for the source Party. In other words, this attribute counts the number
of error responses pdu's which could not be generated due to size
constraints."
DEFVAL { 0 }
::= { vrSnmpV2StatsStatsEntry 9 }
vrSnmpV1Stats OBJECT IDENTIFIER ::= { vrSnmp 10 }
vrSnmpV1StatsRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpV1StatsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpV1Stats components."
::= { vrSnmpV1Stats 1 }
vrSnmpV1StatsRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpV1StatsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpV1Stats component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpV1StatsIndex }
::= { vrSnmpV1StatsRowStatusTable 1 }
VrSnmpV1StatsRowStatusEntry ::= SEQUENCE {
vrSnmpV1StatsRowStatus
RowStatus,
vrSnmpV1StatsComponentName
DisplayString,
vrSnmpV1StatsStorageType
StorageType,
vrSnmpV1StatsIndex
NonReplicated }
vrSnmpV1StatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpV1Stats components.
These components cannot be added nor deleted."
::= { vrSnmpV1StatsRowStatusEntry 1 }
vrSnmpV1StatsComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpV1StatsRowStatusEntry 2 }
vrSnmpV1StatsStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpV1Stats tables."
::= { vrSnmpV1StatsRowStatusEntry 4 }
vrSnmpV1StatsIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmpV1Stats tables."
::= { vrSnmpV1StatsRowStatusEntry 10 }
vrSnmpV1StatsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpV1StatsStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the collection of statistics as defined
by SNMPv2 providing basic instrumentation of a SNMPv2 Agent
which also implements SNMPv1. The group is derived from rfc
1450."
::= { vrSnmpV1Stats 10 }
vrSnmpV1StatsStatsEntry OBJECT-TYPE
SYNTAX VrSnmpV1StatsStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpV1StatsStatsTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpV1StatsIndex }
::= { vrSnmpV1StatsStatsTable 1 }
VrSnmpV1StatsStatsEntry ::= SEQUENCE {
vrSnmpV1StatsBadCommunityNames
Unsigned32,
vrSnmpV1StatsBadCommunityUses
Unsigned32 }
vrSnmpV1StatsBadCommunityNames OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 messages received by the SNMP
management entity which had an unknown SNMPv1 Community
string. This has the same value as the attribute
inBadCommunityNames under the SnmpMibIIStats component."
DEFVAL { 0 }
::= { vrSnmpV1StatsStatsEntry 1 }
vrSnmpV1StatsBadCommunityUses OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 messages received by the SNMP
management entity which attempted to perform an operation not
allowed for the indicated SNMPv1 Community. This has the same
value as the attribute inBadCommunityUses under the
SnmpMibIIStats component."
DEFVAL { 0 }
::= { vrSnmpV1StatsStatsEntry 2 }
vrSnmpMibIIStats OBJECT IDENTIFIER ::= { vrSnmp 11 }
vrSnmpMibIIStatsRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpMibIIStatsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrSnmpMibIIStats components."
::= { vrSnmpMibIIStats 1 }
vrSnmpMibIIStatsRowStatusEntry OBJECT-TYPE
SYNTAX VrSnmpMibIIStatsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrSnmpMibIIStats component."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpMibIIStatsIndex }
::= { vrSnmpMibIIStatsRowStatusTable 1 }
VrSnmpMibIIStatsRowStatusEntry ::= SEQUENCE {
vrSnmpMibIIStatsRowStatus
RowStatus,
vrSnmpMibIIStatsComponentName
DisplayString,
vrSnmpMibIIStatsStorageType
StorageType,
vrSnmpMibIIStatsIndex
NonReplicated }
vrSnmpMibIIStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrSnmpMibIIStats components.
These components cannot be added nor deleted."
::= { vrSnmpMibIIStatsRowStatusEntry 1 }
vrSnmpMibIIStatsComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrSnmpMibIIStatsRowStatusEntry 2 }
vrSnmpMibIIStatsStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrSnmpMibIIStats tables."
::= { vrSnmpMibIIStatsRowStatusEntry 4 }
vrSnmpMibIIStatsIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrSnmpMibIIStats tables."
::= { vrSnmpMibIIStatsRowStatusEntry 10 }
vrSnmpMibIIStatsStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrSnmpMibIIStatsStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the collection of statistics as defined
by MIB II providing basic instrumentation of a SNMP Agent. The
group is derived from rfc 1213. Statistics which are only relevant
for SNMP Managers do not appear."
::= { vrSnmpMibIIStats 10 }
vrSnmpMibIIStatsStatsEntry OBJECT-TYPE
SYNTAX VrSnmpMibIIStatsStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrSnmpMibIIStatsStatsTable."
INDEX {
vrIndex,
vrSnmpIndex,
vrSnmpMibIIStatsIndex }
::= { vrSnmpMibIIStatsStatsTable 1 }
VrSnmpMibIIStatsStatsEntry ::= SEQUENCE {
vrSnmpMibIIStatsInPackets
Unsigned32,
vrSnmpMibIIStatsInBadCommunityNames
Unsigned32,
vrSnmpMibIIStatsInBadCommunityUses
Unsigned32,
vrSnmpMibIIStatsInAsnParseErrs
Unsigned32,
vrSnmpMibIIStatsOutPackets
Unsigned32,
vrSnmpMibIIStatsInBadVersions
Unsigned32,
vrSnmpMibIIStatsInTotalReqVars
Unsigned32,
vrSnmpMibIIStatsInTotalSetVars
Unsigned32,
vrSnmpMibIIStatsInGetRequests
Unsigned32,
vrSnmpMibIIStatsInGetNexts
Unsigned32,
vrSnmpMibIIStatsInSetRequests
Unsigned32,
vrSnmpMibIIStatsOutTooBigs
Unsigned32,
vrSnmpMibIIStatsOutNoSuchNames
Unsigned32,
vrSnmpMibIIStatsOutBadValues
Unsigned32,
vrSnmpMibIIStatsOutGenErrs
Unsigned32,
vrSnmpMibIIStatsOutGetResponses
Unsigned32,
vrSnmpMibIIStatsOutTraps
Unsigned32 }
vrSnmpMibIIStatsInPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute represents the total number of SNMP messages
received by the SNMP management entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 1 }
vrSnmpMibIIStatsInBadCommunityNames OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 messages received by the SNMP
management entity which had an unknown SNMPv1 Community
string. This has the same value as the attribute
badCommunityNames under the SnmpV1Stats component."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 2 }
vrSnmpMibIIStatsInBadCommunityUses OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 messages received by the SNMP
management entity which attempted to perform an operation not
allowed for the indicated SNMPv1 Community. This has the same
value as the attribute badCommunityUses under the SnmpV1Stats
component."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 3 }
vrSnmpMibIIStatsInAsnParseErrs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMP messages received by the SNMP
management entity which were improperly BER encoded or had an
invalid ASN.1 syntax."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 4 }
vrSnmpMibIIStatsOutPackets OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMP messages transmitted by the SNMP
management entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 5 }
vrSnmpMibIIStatsInBadVersions OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 messages received by the SNMP
management entity with an invalid SNMP version number."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 6 }
vrSnmpMibIIStatsInTotalReqVars OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the MIB objects successfully retrieved by Get,
and Get-Next requests."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 7 }
vrSnmpMibIIStatsInTotalSetVars OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the MIB objects successfully Set by SNMP
requests."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 8 }
vrSnmpMibIIStatsInGetRequests OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Get requests accepted and processed by the
SNMP management entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 9 }
vrSnmpMibIIStatsInGetNexts OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Get-Next requests accepted and processed
by the SNMP management entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 10 }
vrSnmpMibIIStatsInSetRequests OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Set requests accepted and processed by the
SNMP management entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 11 }
vrSnmpMibIIStatsOutTooBigs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the responses generated by the SNMP
management entity with an error-status field of tooBig."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 12 }
vrSnmpMibIIStatsOutNoSuchNames OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 responses generated by the
SNMP management entity with an error status field of
noSuchName."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 13 }
vrSnmpMibIIStatsOutBadValues OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMPv1 responses generated by the
SNMP management entity with an error status field of badValue."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 14 }
vrSnmpMibIIStatsOutGenErrs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the SNMP responses generated by the SNMP
management entity with an error-status field of genErr."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 15 }
vrSnmpMibIIStatsOutGetResponses OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Get responses generated by the SNMP
management entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 16 }
vrSnmpMibIIStatsOutTraps OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Traps generated by the SNMP management
entity."
DEFVAL { 0 }
::= { vrSnmpMibIIStatsStatsEntry 17 }
vrInitSnmpConfig OBJECT IDENTIFIER ::= { vr 9 }
vrInitSnmpConfigRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrInitSnmpConfigRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This entry controls the addition and deletion of
vrInitSnmpConfig components."
::= { vrInitSnmpConfig 1 }
vrInitSnmpConfigRowStatusEntry OBJECT-TYPE
SYNTAX VrInitSnmpConfigRowStatusEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A single entry in the table represents a single
vrInitSnmpConfig component."
INDEX {
vrIndex,
vrInitSnmpConfigIndex }
::= { vrInitSnmpConfigRowStatusTable 1 }
VrInitSnmpConfigRowStatusEntry ::= SEQUENCE {
vrInitSnmpConfigRowStatus
RowStatus,
vrInitSnmpConfigComponentName
DisplayString,
vrInitSnmpConfigStorageType
StorageType,
vrInitSnmpConfigIndex
NonReplicated }
vrInitSnmpConfigRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrInitSnmpConfig components.
These components can be added and deleted."
::= { vrInitSnmpConfigRowStatusEntry 1 }
vrInitSnmpConfigComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrInitSnmpConfigRowStatusEntry 2 }
vrInitSnmpConfigStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This variable represents the storage type value for the
vrInitSnmpConfig tables."
::= { vrInitSnmpConfigRowStatusEntry 4 }
vrInitSnmpConfigIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This variable represents the index for the vrInitSnmpConfig tables."
::= { vrInitSnmpConfigRowStatusEntry 10 }
vrInitSnmpConfigProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrInitSnmpConfigProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This group contains provisionable attributes required for the
definition of initial SNMPv2 parties, contexts, views, and access
control policies, as defined in rfc1447."
::= { vrInitSnmpConfig 10 }
vrInitSnmpConfigProvEntry OBJECT-TYPE
SYNTAX VrInitSnmpConfigProvEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the vrInitSnmpConfigProvTable."
INDEX {
vrIndex,
vrInitSnmpConfigIndex }
::= { vrInitSnmpConfigProvTable 1 }
VrInitSnmpConfigProvEntry ::= SEQUENCE {
vrInitSnmpConfigAgentAddress
AsciiString,
vrInitSnmpConfigManagerAddress
AsciiString }
vrInitSnmpConfigAgentAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..80))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute is the address of the Virtual Router where the initial
Agent parties will receive network management traffic. It is used to
initialize the transport address of the initial local parties and also is
used to define initial party and context identifiers.
The format of the agentAddress is an IpAddress."
::= { vrInitSnmpConfigProvEntry 1 }
vrInitSnmpConfigManagerAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..80))
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute is the address of the SNMPv2 manager. It is used to
initialize the transport address of the initial non-local parties.
The format of the managerAddress is an IpAddress."
::= { vrInitSnmpConfigProvEntry 2 }
baseSnmpGroup OBJECT IDENTIFIER ::= { baseSnmpMIB 1 }
baseSnmpGroupBD OBJECT IDENTIFIER ::= { baseSnmpGroup 4 }
baseSnmpGroupBD01 OBJECT IDENTIFIER ::= { baseSnmpGroupBD 2 }
baseSnmpGroupBD01A OBJECT IDENTIFIER ::= { baseSnmpGroupBD01 2 }
baseSnmpCapabilities OBJECT IDENTIFIER ::= { baseSnmpMIB 3 }
baseSnmpCapabilitiesBD OBJECT IDENTIFIER ::= { baseSnmpCapabilities 4 }
baseSnmpCapabilitiesBD01 OBJECT IDENTIFIER ::= { baseSnmpCapabilitiesBD 2 }
baseSnmpCapabilitiesBD01A OBJECT IDENTIFIER ::= { baseSnmpCapabilitiesBD01 2 }
END