Nortel-Magellan-Passport-DisdnETSIMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
DisplayString,
StorageType,
RowStatus,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
NonReplicated,
Link
FROM Nortel-Magellan-Passport-TextualConventionsMIB
dataSigChanIndex,
dataSigChan
FROM Nortel-Magellan-Passport-DataIsdnMIB;
disdnETSIMIB OBJECT IDENTIFIER ::= { passportMIBs 117 }
dataSigChanEtsi OBJECT IDENTIFIER ::= { dataSigChan 10 }
dataSigChanEtsiRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
dataSigChanEtsi components."
::= { dataSigChanEtsi 1 }
dataSigChanEtsiRowStatusEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
dataSigChanEtsi component."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex }
::= { dataSigChanEtsiRowStatusTable 1 }
DataSigChanEtsiRowStatusEntry ::= SEQUENCE {
dataSigChanEtsiRowStatus
RowStatus,
dataSigChanEtsiComponentName
DisplayString,
dataSigChanEtsiStorageType
StorageType,
dataSigChanEtsiIndex
NonReplicated }
dataSigChanEtsiRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
dataSigChanEtsi components.
These components can be added and deleted."
::= { dataSigChanEtsiRowStatusEntry 1 }
dataSigChanEtsiComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { dataSigChanEtsiRowStatusEntry 2 }
dataSigChanEtsiStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
dataSigChanEtsi tables."
::= { dataSigChanEtsiRowStatusEntry 4 }
dataSigChanEtsiIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the dataSigChanEtsi tables."
::= { dataSigChanEtsiRowStatusEntry 10 }
dataSigChanEtsiL2Table OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiL2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group represents the provisionable Layer 2 attributes of the
Q931 CCITT protocol."
::= { dataSigChanEtsi 11 }
dataSigChanEtsiL2Entry OBJECT-TYPE
SYNTAX DataSigChanEtsiL2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiL2Table."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex }
::= { dataSigChanEtsiL2Table 1 }
DataSigChanEtsiL2Entry ::= SEQUENCE {
dataSigChanEtsiT23
Unsigned32,
dataSigChanEtsiT200
Unsigned32,
dataSigChanEtsiN200
Unsigned32,
dataSigChanEtsiT203
Unsigned32,
dataSigChanEtsiN201
Unsigned32,
dataSigChanEtsiCircuitSwitchedK
Unsigned32 }
dataSigChanEtsiT23 OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the layer2 enable request timer."
DEFVAL { 10 }
::= { dataSigChanEtsiL2Entry 1 }
dataSigChanEtsiT200 OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum time between a layer 2 frame
and its acknowledgement"
DEFVAL { 2 }
::= { dataSigChanEtsiL2Entry 2 }
dataSigChanEtsiN200 OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of re-transmissions of
a layer2 frame."
DEFVAL { 3 }
::= { dataSigChanEtsiL2Entry 3 }
dataSigChanEtsiT203 OBJECT-TYPE
SYNTAX Unsigned32 (2..40)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum time that a no layer 2 traffic
situation can last. Expiry triggers a check on whether the far end is
a live."
DEFVAL { 10 }
::= { dataSigChanEtsiL2Entry 4 }
dataSigChanEtsiN201 OBJECT-TYPE
SYNTAX Unsigned32 (4..260)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of octets in an
information field."
DEFVAL { 260 }
::= { dataSigChanEtsiL2Entry 5 }
dataSigChanEtsiCircuitSwitchedK OBJECT-TYPE
SYNTAX Unsigned32 (1..632)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of frames for B
channel use."
DEFVAL { 7 }
::= { dataSigChanEtsiL2Entry 6 }
dataSigChanEtsiProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines the general options of the d-channel signalling
link."
::= { dataSigChanEtsi 13 }
dataSigChanEtsiProvEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiProvTable."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex }
::= { dataSigChanEtsiProvTable 1 }
DataSigChanEtsiProvEntry ::= SEQUENCE {
dataSigChanEtsiSide
INTEGER }
dataSigChanEtsiSide OBJECT-TYPE
SYNTAX INTEGER {
network(1),
user(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether the layer 2 HDLC interface is the
network or user side of the connection."
DEFVAL { user }
::= { dataSigChanEtsiProvEntry 1 }
dataSigChanEtsiOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the operational attributes for the signalling
protocol."
::= { dataSigChanEtsi 15 }
dataSigChanEtsiOperEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiOperTable."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex }
::= { dataSigChanEtsiOperTable 1 }
DataSigChanEtsiOperEntry ::= SEQUENCE {
dataSigChanEtsiActiveChannels
Unsigned32,
dataSigChanEtsiPeakActiveChannels
Unsigned32,
dataSigChanEtsiDChanStatus
INTEGER }
dataSigChanEtsiActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of currently active channels.
This includes data and voice channels."
DEFVAL { 0 }
::= { dataSigChanEtsiOperEntry 1 }
dataSigChanEtsiPeakActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum number of channels that have
been active on this signalling channel during the last polling period."
DEFVAL { 0 }
::= { dataSigChanEtsiOperEntry 4 }
dataSigChanEtsiDChanStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService(0),
establishing(1),
established(2),
enabling(3),
inService(4),
restarting(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgement from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being rei-
initialized."
::= { dataSigChanEtsiOperEntry 7 }
dataSigChanEtsiToolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiToolsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains a series of operational attributes which turn on
and off several kinds of tracing."
::= { dataSigChanEtsi 16 }
dataSigChanEtsiToolsEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiToolsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiToolsTable."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex }
::= { dataSigChanEtsiToolsTable 1 }
DataSigChanEtsiToolsEntry ::= SEQUENCE {
dataSigChanEtsiTracing
OCTET STRING }
dataSigChanEtsiTracing OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines which types of tracing are active for this
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueue attribute in Col/debug
must be greater than 0 and a Telnet NMIS session must list the
debug stream in in its data streams (ex. set nmis telnet session/1
dataStreams debug). Different types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and will slow
down call processing on a heavily loaded card. If there is message
block exhaustion tracing will be suspended for a period and then
automatically reenabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occuring. Protocol errors are also reported in summary form as
alarms.
q931Summary - Summary of the Q.931 messages on the signalling
link, including certain call details (calling number, called number,
release codes).
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Messages in hex format being sent and received on the
link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4)"
::= { dataSigChanEtsiToolsEntry 1 }
dataSigChanEtsiFramer OBJECT IDENTIFIER ::= { dataSigChanEtsi 2 }
dataSigChanEtsiFramerRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiFramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
dataSigChanEtsiFramer components."
::= { dataSigChanEtsiFramer 1 }
dataSigChanEtsiFramerRowStatusEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiFramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
dataSigChanEtsiFramer component."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex,
dataSigChanEtsiFramerIndex }
::= { dataSigChanEtsiFramerRowStatusTable 1 }
DataSigChanEtsiFramerRowStatusEntry ::= SEQUENCE {
dataSigChanEtsiFramerRowStatus
RowStatus,
dataSigChanEtsiFramerComponentName
DisplayString,
dataSigChanEtsiFramerStorageType
StorageType,
dataSigChanEtsiFramerIndex
NonReplicated }
dataSigChanEtsiFramerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
dataSigChanEtsiFramer components.
These components cannot be added nor deleted."
::= { dataSigChanEtsiFramerRowStatusEntry 1 }
dataSigChanEtsiFramerComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { dataSigChanEtsiFramerRowStatusEntry 2 }
dataSigChanEtsiFramerStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
dataSigChanEtsiFramer tables."
::= { dataSigChanEtsiFramerRowStatusEntry 4 }
dataSigChanEtsiFramerIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the dataSigChanEtsiFramer tables."
::= { dataSigChanEtsiFramerRowStatusEntry 10 }
dataSigChanEtsiFramerProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiFramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups."
::= { dataSigChanEtsiFramer 10 }
dataSigChanEtsiFramerProvEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiFramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiFramerProvTable."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex,
dataSigChanEtsiFramerIndex }
::= { dataSigChanEtsiFramerProvTable 1 }
DataSigChanEtsiFramerProvEntry ::= SEQUENCE {
dataSigChanEtsiFramerInterfaceName
Link }
dataSigChanEtsiFramerInterfaceName OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run."
::= { dataSigChanEtsiFramerProvEntry 1 }
dataSigChanEtsiFramerStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiFramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { dataSigChanEtsiFramer 12 }
dataSigChanEtsiFramerStateEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiFramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiFramerStateTable."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex,
dataSigChanEtsiFramerIndex }
::= { dataSigChanEtsiFramerStateTable 1 }
DataSigChanEtsiFramerStateEntry ::= SEQUENCE {
dataSigChanEtsiFramerAdminState
INTEGER,
dataSigChanEtsiFramerOperationalState
INTEGER,
dataSigChanEtsiFramerUsageState
INTEGER }
dataSigChanEtsiFramerAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { dataSigChanEtsiFramerStateEntry 1 }
dataSigChanEtsiFramerOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { dataSigChanEtsiFramerStateEntry 2 }
dataSigChanEtsiFramerUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { dataSigChanEtsiFramerStateEntry 3 }
dataSigChanEtsiFramerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanEtsiFramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational statistics data for a Framer
component."
::= { dataSigChanEtsiFramer 13 }
dataSigChanEtsiFramerStatsEntry OBJECT-TYPE
SYNTAX DataSigChanEtsiFramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanEtsiFramerStatsTable."
INDEX {
dataSigChanIndex,
dataSigChanEtsiIndex,
dataSigChanEtsiFramerIndex }
::= { dataSigChanEtsiFramerStatsTable 1 }
DataSigChanEtsiFramerStatsEntry ::= SEQUENCE {
dataSigChanEtsiFramerFrmToIf
Unsigned32,
dataSigChanEtsiFramerFrmFromIf
Unsigned32,
dataSigChanEtsiFramerOctetFromIf
Unsigned32,
dataSigChanEtsiFramerAborts
Unsigned32,
dataSigChanEtsiFramerCrcErrors
Unsigned32,
dataSigChanEtsiFramerLrcErrors
Unsigned32,
dataSigChanEtsiFramerNonOctetErrors
Unsigned32,
dataSigChanEtsiFramerOverruns
Unsigned32,
dataSigChanEtsiFramerUnderruns
Unsigned32,
dataSigChanEtsiFramerLargeFrmErrors
Unsigned32 }
dataSigChanEtsiFramerFrmToIf OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames transmitted to the link
interface by Framer.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 1 }
dataSigChanEtsiFramerFrmFromIf OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames received from the link
interface by Framer.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 2 }
dataSigChanEtsiFramerOctetFromIf OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes received from the link interface by Framer."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 3 }
dataSigChanEtsiFramerAborts OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of aborts received.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 4 }
dataSigChanEtsiFramerCrcErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames with CRC errors.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 5 }
dataSigChanEtsiFramerLrcErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames with LRC errors.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 6 }
dataSigChanEtsiFramerNonOctetErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 7 }
dataSigChanEtsiFramerOverruns OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 8 }
dataSigChanEtsiFramerUnderruns OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 9 }
dataSigChanEtsiFramerLargeFrmErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames received which
were too large. The frame was longer than 500 bytes.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanEtsiFramerStatsEntry 10 }
disdnETSIGroup OBJECT IDENTIFIER ::= { disdnETSIMIB 1 }
disdnETSIGroupBE OBJECT IDENTIFIER ::= { disdnETSIGroup 5 }
disdnETSIGroupBE00 OBJECT IDENTIFIER ::= { disdnETSIGroupBE 1 }
disdnETSIGroupBE00A OBJECT IDENTIFIER ::= { disdnETSIGroupBE00 2 }
disdnETSICapabilities OBJECT IDENTIFIER ::= { disdnETSIMIB 3 }
disdnETSICapabilitiesBE OBJECT IDENTIFIER ::= { disdnETSICapabilities 5 }
disdnETSICapabilitiesBE00 OBJECT IDENTIFIER ::= { disdnETSICapabilitiesBE 1 }
disdnETSICapabilitiesBE00A OBJECT IDENTIFIER ::= { disdnETSICapabilitiesBE00 2 }
END