Nortel-Magellan-Passport-DisdnNI2MIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
DisplayString,
StorageType,
RowStatus,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
NonReplicated,
Link
FROM Nortel-Magellan-Passport-TextualConventionsMIB
dataSigChanIndex,
dataSigChan
FROM Nortel-Magellan-Passport-DataIsdnMIB;
disdnNI2MIB OBJECT IDENTIFIER ::= { passportMIBs 126 }
dataSigChanNi2 OBJECT IDENTIFIER ::= { dataSigChan 12 }
dataSigChanNi2RowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2RowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
dataSigChanNi2 components."
::= { dataSigChanNi2 1 }
dataSigChanNi2RowStatusEntry OBJECT-TYPE
SYNTAX DataSigChanNi2RowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
dataSigChanNi2 component."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index }
::= { dataSigChanNi2RowStatusTable 1 }
DataSigChanNi2RowStatusEntry ::= SEQUENCE {
dataSigChanNi2RowStatus
RowStatus,
dataSigChanNi2ComponentName
DisplayString,
dataSigChanNi2StorageType
StorageType,
dataSigChanNi2Index
NonReplicated }
dataSigChanNi2RowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
dataSigChanNi2 components.
These components can be added and deleted."
::= { dataSigChanNi2RowStatusEntry 1 }
dataSigChanNi2ComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { dataSigChanNi2RowStatusEntry 2 }
dataSigChanNi2StorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
dataSigChanNi2 tables."
::= { dataSigChanNi2RowStatusEntry 4 }
dataSigChanNi2Index OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the dataSigChanNi2 tables."
::= { dataSigChanNi2RowStatusEntry 10 }
dataSigChanNi2L2Table OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2L2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group represents the provisionable Layer 2 attributes of the
Q931 CCITT protocol."
::= { dataSigChanNi2 11 }
dataSigChanNi2L2Entry OBJECT-TYPE
SYNTAX DataSigChanNi2L2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2L2Table."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index }
::= { dataSigChanNi2L2Table 1 }
DataSigChanNi2L2Entry ::= SEQUENCE {
dataSigChanNi2T23
Unsigned32,
dataSigChanNi2T200
Unsigned32,
dataSigChanNi2N200
Unsigned32,
dataSigChanNi2T203
Unsigned32,
dataSigChanNi2N201
Unsigned32,
dataSigChanNi2CircuitSwitchedK
Unsigned32 }
dataSigChanNi2T23 OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the layer2 enable request timer."
DEFVAL { 10 }
::= { dataSigChanNi2L2Entry 1 }
dataSigChanNi2T200 OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum time between a layer 2 frame
and its acknowledgement"
DEFVAL { 2 }
::= { dataSigChanNi2L2Entry 2 }
dataSigChanNi2N200 OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of re-transmissions of
a layer2 frame."
DEFVAL { 3 }
::= { dataSigChanNi2L2Entry 3 }
dataSigChanNi2T203 OBJECT-TYPE
SYNTAX Unsigned32 (2..40)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum time that a no layer 2 traffic
situation can last. Expiry triggers a check on whether the far end is
a live."
DEFVAL { 10 }
::= { dataSigChanNi2L2Entry 4 }
dataSigChanNi2N201 OBJECT-TYPE
SYNTAX Unsigned32 (4..260)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of octets in an
information field."
DEFVAL { 260 }
::= { dataSigChanNi2L2Entry 5 }
dataSigChanNi2CircuitSwitchedK OBJECT-TYPE
SYNTAX Unsigned32 (1..632)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of frames for B
channel use."
DEFVAL { 7 }
::= { dataSigChanNi2L2Entry 6 }
dataSigChanNi2ProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2ProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines the general options of the d-channel signalling
link."
::= { dataSigChanNi2 13 }
dataSigChanNi2ProvEntry OBJECT-TYPE
SYNTAX DataSigChanNi2ProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2ProvTable."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index }
::= { dataSigChanNi2ProvTable 1 }
DataSigChanNi2ProvEntry ::= SEQUENCE {
dataSigChanNi2Side
INTEGER }
dataSigChanNi2Side OBJECT-TYPE
SYNTAX INTEGER {
network(1),
user(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether the layer 2 HDLC interface is the
network or user side of the connection."
DEFVAL { user }
::= { dataSigChanNi2ProvEntry 1 }
dataSigChanNi2OperTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2OperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the operational attributes for the signalling
protocol."
::= { dataSigChanNi2 15 }
dataSigChanNi2OperEntry OBJECT-TYPE
SYNTAX DataSigChanNi2OperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2OperTable."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index }
::= { dataSigChanNi2OperTable 1 }
DataSigChanNi2OperEntry ::= SEQUENCE {
dataSigChanNi2ActiveChannels
Unsigned32,
dataSigChanNi2PeakActiveChannels
Unsigned32,
dataSigChanNi2DChanStatus
INTEGER }
dataSigChanNi2ActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of currently active channels.
This includes data and voice channels."
DEFVAL { 0 }
::= { dataSigChanNi2OperEntry 1 }
dataSigChanNi2PeakActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum number of channels that have
been active on this signalling channel during the last polling period."
DEFVAL { 0 }
::= { dataSigChanNi2OperEntry 4 }
dataSigChanNi2DChanStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService(0),
establishing(1),
established(2),
enabling(3),
inService(4),
restarting(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgement from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being rei-
initialized."
::= { dataSigChanNi2OperEntry 7 }
dataSigChanNi2ToolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2ToolsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains a series of operational attributes which turn on
and off several kinds of tracing."
::= { dataSigChanNi2 16 }
dataSigChanNi2ToolsEntry OBJECT-TYPE
SYNTAX DataSigChanNi2ToolsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2ToolsTable."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index }
::= { dataSigChanNi2ToolsTable 1 }
DataSigChanNi2ToolsEntry ::= SEQUENCE {
dataSigChanNi2Tracing
OCTET STRING }
dataSigChanNi2Tracing OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines which types of tracing are active for this
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueue attribute in Col/debug
must be greater than 0 and a Telnet NMIS session must list the
debug stream in in its data streams (ex. set nmis telnet session/1
dataStreams debug). Different types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and will slow
down call processing on a heavily loaded card. If there is message
block exhaustion tracing will be suspended for a period and then
automatically reenabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occuring. Protocol errors are also reported in summary form as
alarms.
q931Summary - Summary of the Q.931 messages on the signalling
link, including certain call details (calling number, called number,
release codes).
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Messages in hex format being sent and received on the
link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4)"
::= { dataSigChanNi2ToolsEntry 1 }
dataSigChanNi2Framer OBJECT IDENTIFIER ::= { dataSigChanNi2 2 }
dataSigChanNi2FramerRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2FramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
dataSigChanNi2Framer components."
::= { dataSigChanNi2Framer 1 }
dataSigChanNi2FramerRowStatusEntry OBJECT-TYPE
SYNTAX DataSigChanNi2FramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
dataSigChanNi2Framer component."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index,
dataSigChanNi2FramerIndex }
::= { dataSigChanNi2FramerRowStatusTable 1 }
DataSigChanNi2FramerRowStatusEntry ::= SEQUENCE {
dataSigChanNi2FramerRowStatus
RowStatus,
dataSigChanNi2FramerComponentName
DisplayString,
dataSigChanNi2FramerStorageType
StorageType,
dataSigChanNi2FramerIndex
NonReplicated }
dataSigChanNi2FramerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
dataSigChanNi2Framer components.
These components cannot be added nor deleted."
::= { dataSigChanNi2FramerRowStatusEntry 1 }
dataSigChanNi2FramerComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { dataSigChanNi2FramerRowStatusEntry 2 }
dataSigChanNi2FramerStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
dataSigChanNi2Framer tables."
::= { dataSigChanNi2FramerRowStatusEntry 4 }
dataSigChanNi2FramerIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the dataSigChanNi2Framer tables."
::= { dataSigChanNi2FramerRowStatusEntry 10 }
dataSigChanNi2FramerProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2FramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups."
::= { dataSigChanNi2Framer 10 }
dataSigChanNi2FramerProvEntry OBJECT-TYPE
SYNTAX DataSigChanNi2FramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2FramerProvTable."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index,
dataSigChanNi2FramerIndex }
::= { dataSigChanNi2FramerProvTable 1 }
DataSigChanNi2FramerProvEntry ::= SEQUENCE {
dataSigChanNi2FramerInterfaceName
Link }
dataSigChanNi2FramerInterfaceName OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run."
::= { dataSigChanNi2FramerProvEntry 1 }
dataSigChanNi2FramerStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2FramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { dataSigChanNi2Framer 12 }
dataSigChanNi2FramerStateEntry OBJECT-TYPE
SYNTAX DataSigChanNi2FramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2FramerStateTable."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index,
dataSigChanNi2FramerIndex }
::= { dataSigChanNi2FramerStateTable 1 }
DataSigChanNi2FramerStateEntry ::= SEQUENCE {
dataSigChanNi2FramerAdminState
INTEGER,
dataSigChanNi2FramerOperationalState
INTEGER,
dataSigChanNi2FramerUsageState
INTEGER }
dataSigChanNi2FramerAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { dataSigChanNi2FramerStateEntry 1 }
dataSigChanNi2FramerOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { dataSigChanNi2FramerStateEntry 2 }
dataSigChanNi2FramerUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { dataSigChanNi2FramerStateEntry 3 }
dataSigChanNi2FramerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DataSigChanNi2FramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational statistics data for a Framer
component."
::= { dataSigChanNi2Framer 13 }
dataSigChanNi2FramerStatsEntry OBJECT-TYPE
SYNTAX DataSigChanNi2FramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the dataSigChanNi2FramerStatsTable."
INDEX {
dataSigChanIndex,
dataSigChanNi2Index,
dataSigChanNi2FramerIndex }
::= { dataSigChanNi2FramerStatsTable 1 }
DataSigChanNi2FramerStatsEntry ::= SEQUENCE {
dataSigChanNi2FramerFrmToIf
Unsigned32,
dataSigChanNi2FramerFrmFromIf
Unsigned32,
dataSigChanNi2FramerOctetFromIf
Unsigned32,
dataSigChanNi2FramerAborts
Unsigned32,
dataSigChanNi2FramerCrcErrors
Unsigned32,
dataSigChanNi2FramerLrcErrors
Unsigned32,
dataSigChanNi2FramerNonOctetErrors
Unsigned32,
dataSigChanNi2FramerOverruns
Unsigned32,
dataSigChanNi2FramerUnderruns
Unsigned32,
dataSigChanNi2FramerLargeFrmErrors
Unsigned32 }
dataSigChanNi2FramerFrmToIf OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames transmitted to the link
interface by Framer.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 1 }
dataSigChanNi2FramerFrmFromIf OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames received from the link
interface by Framer.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 2 }
dataSigChanNi2FramerOctetFromIf OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes received from the link interface by Framer."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 3 }
dataSigChanNi2FramerAborts OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of aborts received.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 4 }
dataSigChanNi2FramerCrcErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames with CRC errors.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 5 }
dataSigChanNi2FramerLrcErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames with LRC errors.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 6 }
dataSigChanNi2FramerNonOctetErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 7 }
dataSigChanNi2FramerOverruns OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 8 }
dataSigChanNi2FramerUnderruns OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 9 }
dataSigChanNi2FramerLargeFrmErrors OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames received which
were too large. The frame was longer than 500 bytes.
This count wraps to zero after reaching its maximum value."
DEFVAL { 0 }
::= { dataSigChanNi2FramerStatsEntry 10 }
disdnNI2Group OBJECT IDENTIFIER ::= { disdnNI2MIB 1 }
disdnNI2GroupBE OBJECT IDENTIFIER ::= { disdnNI2Group 5 }
disdnNI2GroupBE00 OBJECT IDENTIFIER ::= { disdnNI2GroupBE 1 }
disdnNI2GroupBE00A OBJECT IDENTIFIER ::= { disdnNI2GroupBE00 2 }
disdnNI2Capabilities OBJECT IDENTIFIER ::= { disdnNI2MIB 3 }
disdnNI2CapabilitiesBE OBJECT IDENTIFIER ::= { disdnNI2Capabilities 5 }
disdnNI2CapabilitiesBE00 OBJECT IDENTIFIER ::= { disdnNI2CapabilitiesBE 1 }
disdnNI2CapabilitiesBE00A OBJECT IDENTIFIER ::= { disdnNI2CapabilitiesBE00 2 }
END