Nortel-Magellan-Passport-DpnRoutingMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
RowPointer,
DisplayString,
StorageType,
RowStatus,
PassportCounter64,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
NonReplicated,
AsciiStringIndex
FROM Nortel-Magellan-Passport-TextualConventionsMIB
rtgIndex,
rtg
FROM Nortel-Magellan-Passport-BaseRoutingMIB;
dpnRoutingMIB OBJECT IDENTIFIER ::= { passportMIBs 21 }
rtgDpn OBJECT IDENTIFIER ::= { rtg 4 }
rtgDpnRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rtgDpn components."
::= { rtgDpn 1 }
rtgDpnRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpn component."
INDEX {
rtgIndex,
rtgDpnIndex }
::= { rtgDpnRowStatusTable 1 }
RtgDpnRowStatusEntry ::= SEQUENCE {
rtgDpnRowStatus
RowStatus,
rtgDpnComponentName
DisplayString,
rtgDpnStorageType
StorageType,
rtgDpnIndex
NonReplicated }
rtgDpnRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpn components.
These components cannot be added nor deleted."
::= { rtgDpnRowStatusEntry 1 }
rtgDpnComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnRowStatusEntry 2 }
rtgDpnStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpn tables."
::= { rtgDpnRowStatusEntry 4 }
rtgDpnIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpn tables."
::= { rtgDpnRowStatusEntry 10 }
rtgDpnProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisioning data for the DpnAddressPlan.
Attributes in this group must be set to allow the DpnAddressPlan
component to function properly."
::= { rtgDpn 11 }
rtgDpnProvEntry OBJECT-TYPE
SYNTAX RtgDpnProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnProvTable."
INDEX {
rtgIndex,
rtgDpnIndex }
::= { rtgDpnProvTable 1 }
RtgDpnProvEntry ::= SEQUENCE {
rtgDpnLogicalNetworkNumber
Unsigned32,
rtgDpnRoutingId
Unsigned32,
rtgDpnModuleId
Unsigned32,
rtgDpnDelayMetricCutOff
Unsigned32,
rtgDpnThroughputMetricCutOff
Unsigned32,
rtgDpnForwardingPolicy
INTEGER,
rtgDpnDelayMetricRangeBoundary
Unsigned32,
rtgDpnTputMetricRangeBoundary
Unsigned32 }
rtgDpnLogicalNetworkNumber OBJECT-TYPE
SYNTAX Unsigned32 (1..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the Logical Network Number for the
DpnAddressPlan. Since only one instance of this component can
exist, this value is always set to one. It is provided here to be
consistent with other address plans and so that it can be queried."
DEFVAL { 1 }
::= { rtgDpnProvEntry 1 }
rtgDpnRoutingId OBJECT-TYPE
SYNTAX Unsigned32 (1..126)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Routing Identifier (RID) associated with
the Passport node.
The RID is used to identify a group of one or more interconnected
Passport nodes (called a subnet) supporting the transport of DPN
traffic. Its value must be the same as that of the other Passport nodes
in this subnet and different from that of all RMs and other Passport
subnets in the network.
The routingId must be set when a DpnAddressPlan component is
configured on an Passport node.
Changing the value of the routingId will cause the node to restart."
::= { rtgDpnProvEntry 2 }
rtgDpnModuleId OBJECT-TYPE
SYNTAX Unsigned32 (1..1909)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Module Identifier (MID) associated with
the Passport node.
The MID is used to identify an Passport node supporting the
transport of DPN traffic. Its value must be different from that of all
MIDs assigned to Passport nodes in this RID subnet (interconnected
Passport nodes sharing a RID) and AMs in clusters supported by
this subnet. If routing zones are used, it must also be unique from
all other MIDs in this zone.
The moduleId must be set when a DpnAddressPlan component is
configured on an Passport node.
Changing the value of the moduleId will cause the node to restart."
::= { rtgDpnProvEntry 3 }
rtgDpnDelayMetricCutOff OBJECT-TYPE
SYNTAX Unsigned32 (64..250)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the delay metric value beyond which a
destination RID should be considered unreachable. That is, if a
delay metric to a RID is equal to or greater than this value then the
RID is considered to be unreachable in the delay class of service.
Lowering this value has the effect of speeding up the detection of
the loss of reachability to a RID. It also reduces the amount of
Routing Table Update (RTU) traffic generated in this scenario. Care
must be taken to ensure that the value chosen is big enough for the
longest delay path in the network.
This attribute is optional; a default of 128 is used when it is not set.
It is recommended that all nodes in the network be provisioned with
the same cut off value."
DEFVAL { 128 }
::= { rtgDpnProvEntry 4 }
rtgDpnThroughputMetricCutOff OBJECT-TYPE
SYNTAX Unsigned32 (128..245)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the throughput metric value beyond which a
destination RID should be considered unreachable. That is, if a
throughput metric to a RID is equal to or greater than this value
then the RID will be considered to be unreachable in the throughput
class of service.
Lowering this value has the effect of speeding up the detection of
the loss of reachability to a RID. It also reduces the amount of
Routing Table Update (RTU) traffic generated in this scenario.Care
must be taken to ensure that the value chosen is big enough for the
longest throughput path in the network.
This attribute is optional; a default of 245 is used when it is not set.
It is recommended that all nodes in the network be provisioned with
the same cut off value."
DEFVAL { 245 }
::= { rtgDpnProvEntry 5 }
rtgDpnForwardingPolicy OBJECT-TYPE
SYNTAX INTEGER {
loadspread(0),
loadshare(1),
loadspreadFast(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the forwarding policy used by packet
forwarding to handle DPN traffic on a Passport module.
When this attribute is set to loadshare, DPN traffic is shared among
preferred links in a link group in proportion to the available
bandwidth on each link; the traffic is not forwarded in an order-
preserved manner and needs resequencing at the destination, but the
available bandwidth in a link group is utilized efficiently.
When this attribute is set to loadspread, DPN traffic is forwarded in
an order-preserved manner along a randomly selected route; the
traffic sticks to a particular link in a link group, and will not spill
over to other links in the link group unless there is congestion on
the selected link.
When this attribute is set to loadspreadFast, DPN traffic is
forwarded in an order-preserved manner along a randomly selected
route; the traffic sticks to a particular link in a link group, and will
not spill over to other links in the link group. Choosing this value
may improve throughput but traffic may be discarded in the
presence of congestion.
It is recommended that all nodes in the network be provisioned with
the same forwarding policy."
DEFVAL { loadspread }
::= { rtgDpnProvEntry 6 }
rtgDpnDelayMetricRangeBoundary OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the total path delay metric below which the
variance value specified for delay COS and a low metric range is
used, and at or above which the variance value specified for delay
COS and a high metric range is used.
This attribute defaults to 0, so that the variance value specified for
delay COS and a high metric range is used for all delay paths. If this
attribute is set to 2147483647, the variance value specified for
delay COS and a low metric range is used for all delay paths."
DEFVAL { 0 }
::= { rtgDpnProvEntry 7 }
rtgDpnTputMetricRangeBoundary OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the total path throughput metric below which
the variance value specified for throughput COS and a low metric
range is used, and at or above which the variance value specified for
throughput COS and a high metric range is used.
This attribute defaults to 0, so that the variance value specified for
throughput COS and a high metric range is used for all delay paths.
If this attribute is set to 2147483647, the variance value specified
for throughput COS and a low metric range is used for all
throughput paths."
DEFVAL { 0 }
::= { rtgDpnProvEntry 8 }
rtgDpnConStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnConStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group of attributes provides statistics about the behavior of the
DpnAddressPlan component. The statistics concern the distribution
of routing information, required to support the routing of DPN
traffic, to all Passport nodes in the RID subnet."
::= { rtgDpn 13 }
rtgDpnConStatsEntry OBJECT-TYPE
SYNTAX RtgDpnConStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnConStatsTable."
INDEX {
rtgIndex,
rtgDpnIndex }
::= { rtgDpnConStatsTable 1 }
RtgDpnConStatsEntry ::= SEQUENCE {
rtgDpnControlPktTx
Unsigned32,
rtgDpnControlPktRx
Unsigned32,
rtgDpnControlBytesTx
Unsigned32,
rtgDpnControlBytesRx
Unsigned32,
rtgDpnOutOfSequencePkt
Unsigned32 }
rtgDpnControlPktTx OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of internal Passport DPN
control packets, originating from this node, sent to other Passport
nodes in the RID subnet. The packets contain DPN routing
information required by the DpnAddressPlan component to support
the transport of DPN traffic. The Packets received from a neighbor
node and forwarded to other neighbors are not counted. The counter
wraps around to zero when the maximum value is reached."
::= { rtgDpnConStatsEntry 1 }
rtgDpnControlPktRx OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of internal Passport DPN
control packets received from other Passport nodes in the RID
subnet. The packets contain DPN routing information required by
the DpnAddressPlan component to support the transport of DPN
traffic. The counter wraps around to zero when the maximum value
is reached."
::= { rtgDpnConStatsEntry 2 }
rtgDpnControlBytesTx OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of internal Passport DPN
control packet bytes, originating from the node, sent to other
Passport nodes in the RID subnet. The packets contain DPN routing
information required by the DpnAddressPlan component to support
the transport of DPN traffic. Packet bytes received from a neighbor
node and forwarded to other neighbors are not counted. The counter
wraps around to zero when the maximum value is reached."
::= { rtgDpnConStatsEntry 3 }
rtgDpnControlBytesRx OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of internal Passport DPN
control packet bytes received from other Passport nodes in the RID
subnet. The packets contain DPN routing information required by
the DpnAddressPlan component to support the transport of DPN
traffic. The counter wraps around to zero when the maximum value
is reached."
::= { rtgDpnConStatsEntry 4 }
rtgDpnOutOfSequencePkt OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of internal Passport DPN
control packets received and rejected. These packets contained old
sequence numbers. The packets contain DPN routing information
required by the DpnAddressPlan component to support the
transport of DPN traffic. The counter wraps around to zero when the
maximum value is reached."
::= { rtgDpnConStatsEntry 5 }
rtgDpnFwdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group of attributes provides statistics for the traffic handled by
DPN packet forwarding on this module. The statistics can be used
to monitor the connectionless traffic profile on this module."
::= { rtgDpn 14 }
rtgDpnFwdStatsEntry OBJECT-TYPE
SYNTAX RtgDpnFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnFwdStatsTable."
INDEX {
rtgIndex,
rtgDpnIndex }
::= { rtgDpnFwdStatsTable 1 }
RtgDpnFwdStatsEntry ::= SEQUENCE {
rtgDpnTotalPackets
PassportCounter64,
rtgDpnThroughputPackets
PassportCounter64,
rtgDpnDelayPackets
PassportCounter64,
rtgDpnNormalReliabilityPackets
PassportCounter64,
rtgDpnHighReliabilityPackets
PassportCounter64,
rtgDpnDiscardNoRoute
PassportCounter64,
rtgDpnInterruptingPackets
PassportCounter64,
rtgDpnDiscardLpCongested
PassportCounter64 }
rtgDpnTotalPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of delay and throughput
packets handled by DPN packet forwarding on this module. Note
that DPRS packets leaving the network at this module are not
counted. The counter wraps to zero when the maximum value is
exceeded."
::= { rtgDpnFwdStatsEntry 1 }
rtgDpnThroughputPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the throughput packets handled by DPN packet
forwarding on this module. Note that DPRS packets leaving the
network at this module are not counted. The counter wraps to zero
when the maximum value is exceeded."
::= { rtgDpnFwdStatsEntry 2 }
rtgDpnDelayPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the delay packets handled by DPN packet
forwarding on this module. Note that DPRS packets leaving the
network at this module are not counted. The counter wraps to zero
when the maximum value is exceeded."
::= { rtgDpnFwdStatsEntry 3 }
rtgDpnNormalReliabilityPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the normal reliability packets handled by DPN
packet forwarding on this module when the forwardingPolicy
attribute of Routing DpnAddressPlan is set to loadshare or
loadspread. Note that DPRS packets leaving the network at this
module are not counted. The counter wraps to zero when the
maximum value is exceeded."
::= { rtgDpnFwdStatsEntry 4 }
rtgDpnHighReliabilityPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the high reliability packets handled by DPN
packet forwarding on this module when the forwardingPolicy
attribute of Routing DpnAddressPlan is set to loadshare or
loadspread. Note that DPRS packets leaving the network at this
module are not counted. The counter wraps to zero when the
maximum value is exceeded."
::= { rtgDpnFwdStatsEntry 5 }
rtgDpnDiscardNoRoute OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the packets discarded when DPN packet
forwarding has failed to find a route to forward the packets on this
module. Note that DPRS packets leaving the network at this module
are not counted. The counter wraps to zero when the maximum
value is exceeded."
::= { rtgDpnFwdStatsEntry 6 }
rtgDpnInterruptingPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of multimedia packets
handled by DPN packet forwarding on this module. Note that DPRS
packets leaving the network at this module are not counted. The
counter wraps to zero when the maximum value is exceeded."
::= { rtgDpnFwdStatsEntry 7 }
rtgDpnDiscardLpCongested OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the packets that have been discarded by
packet forwarding due to LP congestion on this module. A packet
encounters LP congestion when there is insufficient shared
memory. Note that DPRS packets leaving the network at this
module are not counted. The counter wraps to zero when the
maximum value is exceeded."
::= { rtgDpnFwdStatsEntry 8 }
rtgDpnCallServerModuleRidsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCallServerModuleRidsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute indicates the RIDs of the Call Server Resource
Modules (CSRMs) currently in use to support Call Server functions,
such as SCR and DCR, for the Passport subnet. Up to two CSRMs
can be in use to support such Call Server functions.
Note that packets destined to Call Server functions are routed to the
closest CSRM supporting the required server functionality."
::= { rtgDpn 232 }
rtgDpnCallServerModuleRidsEntry OBJECT-TYPE
SYNTAX RtgDpnCallServerModuleRidsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCallServerModuleRidsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCallServerModuleRidsValue }
::= { rtgDpnCallServerModuleRidsTable 1 }
RtgDpnCallServerModuleRidsEntry ::= SEQUENCE {
rtgDpnCallServerModuleRidsValue
Integer32 }
rtgDpnCallServerModuleRidsValue OBJECT-TYPE
SYNTAX Integer32 (1..126)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rtgDpnCallServerModuleRidsTable."
::= { rtgDpnCallServerModuleRidsEntry 1 }
rtgDpnSubnetMidsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnSubnetMidsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute indicates which of the ReachableMidInfo (Mid)
components refer to MIDs which are members of the Passport
subnet. This list does not include AMs connected to the subnet."
::= { rtgDpn 233 }
rtgDpnSubnetMidsEntry OBJECT-TYPE
SYNTAX RtgDpnSubnetMidsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnSubnetMidsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnSubnetMidsValue }
::= { rtgDpnSubnetMidsTable 1 }
RtgDpnSubnetMidsEntry ::= SEQUENCE {
rtgDpnSubnetMidsValue
RowPointer }
rtgDpnSubnetMidsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rtgDpnSubnetMidsTable."
::= { rtgDpnSubnetMidsEntry 1 }
rtgDpnVarianceTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnVarianceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute specifies the variance values for high and low metric
ranges, for each class of service (COS). A variance value is the
maximum allowed difference in metric between the best path and
the second path, as a percentage of the best path metric. High and
low metric ranges are defined for each COS by the
delayMetricRangeBoundary and tputMetricRangeBoundary
attributes, and refer to total path metrics.
When a variance value for a certain COS and metric range is set to
the default value of 0, only equal metric paths can be used under
that COS when the best path metric is in that range. When it is set
to a value greater than 0, an alternate path which is safe (that is,
non-looping) and which has a metric within this percentage of the
best path metric can be used as a multipath.
The special value of 9999 signifies an infinite variance, so that any
safe alternate path may be used in addition to the single best path,
regardless of its metric."
::= { rtgDpn 343 }
rtgDpnVarianceEntry OBJECT-TYPE
SYNTAX RtgDpnVarianceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnVarianceTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnVarianceCosIndex,
rtgDpnVarianceMetricRangeIndex }
::= { rtgDpnVarianceTable 1 }
RtgDpnVarianceEntry ::= SEQUENCE {
rtgDpnVarianceCosIndex
INTEGER,
rtgDpnVarianceMetricRangeIndex
INTEGER,
rtgDpnVarianceValue
Unsigned32 }
rtgDpnVarianceCosIndex OBJECT-TYPE
SYNTAX INTEGER {
delay(0),
throughput(1) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the next to last index for the
rtgDpnVarianceTable."
::= { rtgDpnVarianceEntry 1 }
rtgDpnVarianceMetricRangeIndex OBJECT-TYPE
SYNTAX INTEGER {
low(0),
high(1) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the final index for the
rtgDpnVarianceTable."
::= { rtgDpnVarianceEntry 2 }
rtgDpnVarianceValue OBJECT-TYPE
SYNTAX Unsigned32 (0..500 | 9999)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnVarianceTable."
::= { rtgDpnVarianceEntry 3 }
rtgDpnRid OBJECT IDENTIFIER ::= { rtgDpn 2 }
rtgDpnRidRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnRid components."
::= { rtgDpnRid 1 }
rtgDpnRidRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnRidRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnRid component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex }
::= { rtgDpnRidRowStatusTable 1 }
RtgDpnRidRowStatusEntry ::= SEQUENCE {
rtgDpnRidRowStatus
RowStatus,
rtgDpnRidComponentName
DisplayString,
rtgDpnRidStorageType
StorageType,
rtgDpnRidIndex
Integer32 }
rtgDpnRidRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnRid components.
These components cannot be added nor deleted."
::= { rtgDpnRidRowStatusEntry 1 }
rtgDpnRidComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnRidRowStatusEntry 2 }
rtgDpnRidStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnRid tables."
::= { rtgDpnRidRowStatusEntry 4 }
rtgDpnRidIndex OBJECT-TYPE
SYNTAX Integer32 (0..127)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRid tables."
::= { rtgDpnRidRowStatusEntry 10 }
rtgDpnRidOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is maintained by the DpnAddressPlan
component to provide information about the RIDs reachable in the
network."
::= { rtgDpnRid 10 }
rtgDpnRidOperEntry OBJECT-TYPE
SYNTAX RtgDpnRidOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidOperTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex }
::= { rtgDpnRidOperTable 1 }
RtgDpnRidOperEntry ::= SEQUENCE {
rtgDpnRidDpnDelayMetric
Unsigned32,
rtgDpnRidDpnTputMetric
Unsigned32 }
rtgDpnRidDpnDelayMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the minimum DPN delay metric to the
destination RID. The delay metric associated with a path is
computed by the routing system by translating the smallest
delayMetric calculated for the destination. A path with a lower
metric value is preferable to one with a higher value as it is
associated with lower delay facilities. The metric displayed is that
of the best path to the destination. This metric is advertised to
neighbor RMs and Passports in a different RID subnet.
A metric value of 255 means the RID is unreachable in the delay
class of service. A value of 0 indicates that no cost is associated
with the path to the destination. This would be the case for the local
node's RID. A metric value of 252 indicates that the destination
RID is that of a Network Module (NM)."
::= { rtgDpnRidOperEntry 1 }
rtgDpnRidDpnTputMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the minimum DPN throughput metric to the
destination RID. The throughput metric associated with a path is
computed by the routing system by translating the smallest
tputMetric calculated for the destination. A path with a lower metric
value is preferable to one with a higher value as it is associated with
higher bandwidth facilities. The metric displayed is that of the best
path to the destination. This metric is advertised to neighbor RMs
and Passports in a different RID subnet.
A metric value of 255 means the RID is unreachable in the
throughput class of service. A value of 0 indicates that no cost is
associated with the path to the destination. This would be the case
for the local node's RID."
::= { rtgDpnRidOperEntry 2 }
rtgDpnRidDelayNextHopLinkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidDelayNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay link group, or groups, that are
being used to reach a neighbor which is the next hop in the path to
the destination RID. DPN traffic will be spread across the links, in
up to two link groups, when available. The link groups selected are
those associated with the two loop-free paths with the lowest delay
metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an RM.
If no link groups are listed then the destination is not reachable in
the delay class of service (except in the case of the local node's
RID).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it."
::= { rtgDpnRid 226 }
rtgDpnRidDelayNextHopLinkGroupsEntry OBJECT-TYPE
SYNTAX RtgDpnRidDelayNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidDelayNextHopLinkGroupsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidDelayNextHopLinkGroupsIndex }
::= { rtgDpnRidDelayNextHopLinkGroupsTable 1 }
RtgDpnRidDelayNextHopLinkGroupsEntry ::= SEQUENCE {
rtgDpnRidDelayNextHopLinkGroupsIndex
Integer32,
rtgDpnRidDelayNextHopLinkGroupsValue
RowPointer }
rtgDpnRidDelayNextHopLinkGroupsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidDelayNextHopLinkGroupsTable."
::= { rtgDpnRidDelayNextHopLinkGroupsEntry 1 }
rtgDpnRidDelayNextHopLinkGroupsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnRidDelayNextHopLinkGroupsTable."
::= { rtgDpnRidDelayNextHopLinkGroupsEntry 2 }
rtgDpnRidTputNextHopLinkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidTputNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput link group, or groups, that
are being used to reach a neighbor which is the next hop in the path
to the destination RID. DPN traffic will be spread across the links,
in up to two link groups, when available. The link groups selected
are those associated with the two loop-free paths with the lowest
throughput metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an RM.
If no link groups are listed then the destination is not reachable in
the throughput class of service (except in the case of the local
node's RID).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it."
::= { rtgDpnRid 227 }
rtgDpnRidTputNextHopLinkGroupsEntry OBJECT-TYPE
SYNTAX RtgDpnRidTputNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidTputNextHopLinkGroupsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidTputNextHopLinkGroupsIndex }
::= { rtgDpnRidTputNextHopLinkGroupsTable 1 }
RtgDpnRidTputNextHopLinkGroupsEntry ::= SEQUENCE {
rtgDpnRidTputNextHopLinkGroupsIndex
Integer32,
rtgDpnRidTputNextHopLinkGroupsValue
RowPointer }
rtgDpnRidTputNextHopLinkGroupsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidTputNextHopLinkGroupsTable."
::= { rtgDpnRidTputNextHopLinkGroupsEntry 1 }
rtgDpnRidTputNextHopLinkGroupsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnRidTputNextHopLinkGroupsTable."
::= { rtgDpnRidTputNextHopLinkGroupsEntry 2 }
rtgDpnRidDelayPathTrafficProportionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidDelayPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total delay
traffic flows to the destination which are sent over each delay path.
These percentages are achieved when there is a large number of
virtual circuits (VCs)."
::= { rtgDpnRid 328 }
rtgDpnRidDelayPathTrafficProportionsEntry OBJECT-TYPE
SYNTAX RtgDpnRidDelayPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidDelayPathTrafficProportionsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidDelayPathTrafficProportionsIndex }
::= { rtgDpnRidDelayPathTrafficProportionsTable 1 }
RtgDpnRidDelayPathTrafficProportionsEntry ::= SEQUENCE {
rtgDpnRidDelayPathTrafficProportionsIndex
Integer32,
rtgDpnRidDelayPathTrafficProportionsValue
Unsigned32 }
rtgDpnRidDelayPathTrafficProportionsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidDelayPathTrafficProportionsTable."
::= { rtgDpnRidDelayPathTrafficProportionsEntry 1 }
rtgDpnRidDelayPathTrafficProportionsValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnRidDelayPathTrafficProportionsTable."
::= { rtgDpnRidDelayPathTrafficProportionsEntry 2 }
rtgDpnRidTputPathTrafficProportionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidTputPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total throughput
traffic flows to the destination which are sent over each throughput
path. These percentages are achieved when there is a large number
of virtual circuits (VCs)."
::= { rtgDpnRid 329 }
rtgDpnRidTputPathTrafficProportionsEntry OBJECT-TYPE
SYNTAX RtgDpnRidTputPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidTputPathTrafficProportionsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidTputPathTrafficProportionsIndex }
::= { rtgDpnRidTputPathTrafficProportionsTable 1 }
RtgDpnRidTputPathTrafficProportionsEntry ::= SEQUENCE {
rtgDpnRidTputPathTrafficProportionsIndex
Integer32,
rtgDpnRidTputPathTrafficProportionsValue
Unsigned32 }
rtgDpnRidTputPathTrafficProportionsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidTputPathTrafficProportionsTable."
::= { rtgDpnRidTputPathTrafficProportionsEntry 1 }
rtgDpnRidTputPathTrafficProportionsValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnRidTputPathTrafficProportionsTable."
::= { rtgDpnRidTputPathTrafficProportionsEntry 2 }
rtgDpnRidDelayMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidDelayMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay metrics of up to two paths to the
destination RID. The delay metric associated with a path is
computed by the routing system based on the sum of the delays
associated with the links in the path to the destination. A path with a
lower metric value is preferable to one with a higher value as it is
associated with lower delay facilities. The metrics displayed are
those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the RID is
unreachable in the delay class of service. A metric value of
2147483647 for the second path only means that there is only one
viable delay path to the destination. A value of 0 indicates that no
cost is associated with the path to the destination. This would be the
case for the local node's RID. Metric values of 2147483646 indicate
that the destination RID is that of a Network Module (NM)."
::= { rtgDpnRid 339 }
rtgDpnRidDelayMetricEntry OBJECT-TYPE
SYNTAX RtgDpnRidDelayMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidDelayMetricTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidDelayMetricIndex }
::= { rtgDpnRidDelayMetricTable 1 }
RtgDpnRidDelayMetricEntry ::= SEQUENCE {
rtgDpnRidDelayMetricIndex
Integer32,
rtgDpnRidDelayMetricValue
Unsigned32 }
rtgDpnRidDelayMetricIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidDelayMetricTable."
::= { rtgDpnRidDelayMetricEntry 1 }
rtgDpnRidDelayMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnRidDelayMetricTable."
::= { rtgDpnRidDelayMetricEntry 2 }
rtgDpnRidTputMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidTputMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput metrics of up to two paths to
the destination RID. The throughput metric associated with a path is
computed by the routing system based on the sum of the bandwidth
associated with the links in the path to the destination. A path with a
lower metric value is preferable to one with a higher value as it is
associated with higher bandwidth facilities. The metrics displayed
are those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the RID is
unreachable in the throughput class of service. A metric value of
2147483647 for the second path only means that there is only one
viable throughput path to the destination. A value of 0 indicates that
no cost is associated with the path to the destination. This would be
the case for the local node's RID."
::= { rtgDpnRid 340 }
rtgDpnRidTputMetricEntry OBJECT-TYPE
SYNTAX RtgDpnRidTputMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidTputMetricTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidTputMetricIndex }
::= { rtgDpnRidTputMetricTable 1 }
RtgDpnRidTputMetricEntry ::= SEQUENCE {
rtgDpnRidTputMetricIndex
Integer32,
rtgDpnRidTputMetricValue
Unsigned32 }
rtgDpnRidTputMetricIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidTputMetricTable."
::= { rtgDpnRidTputMetricEntry 1 }
rtgDpnRidTputMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnRidTputMetricTable."
::= { rtgDpnRidTputMetricEntry 2 }
rtgDpnRidMid OBJECT IDENTIFIER ::= { rtgDpnRid 2 }
rtgDpnRidMidRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidMidRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnRidMid components."
::= { rtgDpnRidMid 1 }
rtgDpnRidMidRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnRidMidRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnRidMid component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidIndex,
rtgDpnRidMidIndex }
::= { rtgDpnRidMidRowStatusTable 1 }
RtgDpnRidMidRowStatusEntry ::= SEQUENCE {
rtgDpnRidMidRowStatus
RowStatus,
rtgDpnRidMidComponentName
DisplayString,
rtgDpnRidMidStorageType
StorageType,
rtgDpnRidMidIndex
Integer32 }
rtgDpnRidMidRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnRidMid components.
These components cannot be added nor deleted."
::= { rtgDpnRidMidRowStatusEntry 1 }
rtgDpnRidMidComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnRidMidRowStatusEntry 2 }
rtgDpnRidMidStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnRidMid tables."
::= { rtgDpnRidMidRowStatusEntry 4 }
rtgDpnRidMidIndex OBJECT-TYPE
SYNTAX Integer32 (0..2046)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidMid tables."
::= { rtgDpnRidMidRowStatusEntry 10 }
rtgDpnMid OBJECT IDENTIFIER ::= { rtgDpn 3 }
rtgDpnMidRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnMid components."
::= { rtgDpnMid 1 }
rtgDpnMidRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnMidRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnMid component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex }
::= { rtgDpnMidRowStatusTable 1 }
RtgDpnMidRowStatusEntry ::= SEQUENCE {
rtgDpnMidRowStatus
RowStatus,
rtgDpnMidComponentName
DisplayString,
rtgDpnMidStorageType
StorageType,
rtgDpnMidIndex
Integer32 }
rtgDpnMidRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnMid components.
These components cannot be added nor deleted."
::= { rtgDpnMidRowStatusEntry 1 }
rtgDpnMidComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnMidRowStatusEntry 2 }
rtgDpnMidStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnMid tables."
::= { rtgDpnMidRowStatusEntry 4 }
rtgDpnMidIndex OBJECT-TYPE
SYNTAX Integer32 (0..2046)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMid tables."
::= { rtgDpnMidRowStatusEntry 10 }
rtgDpnMidOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes is maintained by DpnAddressPlan
component to provide information about the MIDs reachable, or
once reachable, through the local RID subnet."
::= { rtgDpnMid 10 }
rtgDpnMidOperEntry OBJECT-TYPE
SYNTAX RtgDpnMidOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidOperTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex }
::= { rtgDpnMidOperTable 1 }
RtgDpnMidOperEntry ::= SEQUENCE {
rtgDpnMidSubstituteRid
Unsigned32 }
rtgDpnMidSubstituteRid OBJECT-TYPE
SYNTAX Unsigned32 (1..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the substitute RID in use for the MID. This
RID will be substituted for the RID in DPN packets destined to the
local node's RID and the MID in question when the MID is
unreachable (when, for example, all links to an AM from the
Passport subnet are down). It will also be used in the case where the
path through the substitute RID is better than that available through
the subnet's connection to the cluster containing the AM MID.
Substitute RIDs are learned from AM clusters that are supported by
two RIDs (the Passport subnet's RID and another one). The
operator can check this value to determine if a possible back up
route to an AM exists. When there are no delayNextHopLinkGroups
or tputNextHopLinkGroups shown to reach the MID, the substitute
RID will be used.
A value of 128 indicates that no substitute RID is known."
DEFVAL { 128 }
::= { rtgDpnMidOperEntry 3 }
rtgDpnMidDelayNextHopLinkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidDelayNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay link group, or groups, that are
being used to reach a neighbor which is the next hop in the path to
the destination MID. DPN traffic will be spread across the links, in
up to two link groups, when available. The link groups selected are
those associated with the two loop-free paths with the lowest delay
metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an AM.
If no link groups are listed then the destination is not reachable in
the delay class of service (except in the case of the local node's
MID, or when a substitute RID path is available).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it."
::= { rtgDpnMid 228 }
rtgDpnMidDelayNextHopLinkGroupsEntry OBJECT-TYPE
SYNTAX RtgDpnMidDelayNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidDelayNextHopLinkGroupsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex,
rtgDpnMidDelayNextHopLinkGroupsIndex }
::= { rtgDpnMidDelayNextHopLinkGroupsTable 1 }
RtgDpnMidDelayNextHopLinkGroupsEntry ::= SEQUENCE {
rtgDpnMidDelayNextHopLinkGroupsIndex
Integer32,
rtgDpnMidDelayNextHopLinkGroupsValue
RowPointer }
rtgDpnMidDelayNextHopLinkGroupsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMidDelayNextHopLinkGroupsTable."
::= { rtgDpnMidDelayNextHopLinkGroupsEntry 1 }
rtgDpnMidDelayNextHopLinkGroupsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnMidDelayNextHopLinkGroupsTable."
::= { rtgDpnMidDelayNextHopLinkGroupsEntry 2 }
rtgDpnMidTputNextHopLinkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidTputNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput link group, or groups, that
are being used to reach a neighbor which is the next hop in the path
to the destination MID. DPN traffic will be spread across the links,
in up to two link groups, when available. The link groups selected
are those associated with the two loop-free paths with the lowest
throughput metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to an AM.
If no link groups are listed then the destination is not reachable in
the throughput class of service (except in the case of the local
node's MID, or when a substitute RID path is available).
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it."
::= { rtgDpnMid 229 }
rtgDpnMidTputNextHopLinkGroupsEntry OBJECT-TYPE
SYNTAX RtgDpnMidTputNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidTputNextHopLinkGroupsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex,
rtgDpnMidTputNextHopLinkGroupsIndex }
::= { rtgDpnMidTputNextHopLinkGroupsTable 1 }
RtgDpnMidTputNextHopLinkGroupsEntry ::= SEQUENCE {
rtgDpnMidTputNextHopLinkGroupsIndex
Integer32,
rtgDpnMidTputNextHopLinkGroupsValue
RowPointer }
rtgDpnMidTputNextHopLinkGroupsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMidTputNextHopLinkGroupsTable."
::= { rtgDpnMidTputNextHopLinkGroupsEntry 1 }
rtgDpnMidTputNextHopLinkGroupsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnMidTputNextHopLinkGroupsTable."
::= { rtgDpnMidTputNextHopLinkGroupsEntry 2 }
rtgDpnMidDelayMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidDelayMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay metrics of up to two paths to the
destination MID. The delay metric associated with a path is
computed by the routing system based on the sum of the delays
associated with the links (or estimated delays for links to AMs) in
the path to the destination. It is computed for every possible path to
the destination and is used by the DpnAddressPlan component for
path comparison purposes. A path with a lower metric value is
preferable to one with a higher value as it is associated with lower
delay facilities. The metrics displayed are those of the paths being
used to reach the destination.
Metric values of 2147483647 for both paths means the MID is
unreachable in the delay class of service (though it might still be
reachable via its substitute RID). A metric value of 2147483647 for
the second path only means that there is only one viable delay path
to the destination.A value of 0 indicates that no cost is associated
with the path to the destination. This would be the case for the local
node's MID."
::= { rtgDpnMid 330 }
rtgDpnMidDelayMetricEntry OBJECT-TYPE
SYNTAX RtgDpnMidDelayMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidDelayMetricTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex,
rtgDpnMidDelayMetricIndex }
::= { rtgDpnMidDelayMetricTable 1 }
RtgDpnMidDelayMetricEntry ::= SEQUENCE {
rtgDpnMidDelayMetricIndex
Integer32,
rtgDpnMidDelayMetricValue
Unsigned32 }
rtgDpnMidDelayMetricIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMidDelayMetricTable."
::= { rtgDpnMidDelayMetricEntry 1 }
rtgDpnMidDelayMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnMidDelayMetricTable."
::= { rtgDpnMidDelayMetricEntry 2 }
rtgDpnMidTputMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidTputMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput metrics to the destination
MID. The throughput metric associated with a path is computed by
the routing system based on the sum of the bandwidth associated
with the links (or estimated bandwidth for links to AMs) in the path
to the destination. It is computed for every possible path to the
destination and is used by the DpnAddressPlan component for path
comparison purposes. A path with a lower metric value is preferable
to one with a higher value as it is associated with higher bandwidth
facilities. The metrics displayed are those of the paths being used to
reach the destination.
Metric values of 2147483647 for both paths means the MID is
unreachable in the throughput class of service (though it might still
be reachable via its substitute RID). A metric value of 2147483647
for the second path only means that there is only one viable
throughput path to the destination. A value of 0 indicates that no
cost is associated with the path to the destination. This would be the
case for the local node's RID."
::= { rtgDpnMid 331 }
rtgDpnMidTputMetricEntry OBJECT-TYPE
SYNTAX RtgDpnMidTputMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidTputMetricTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex,
rtgDpnMidTputMetricIndex }
::= { rtgDpnMidTputMetricTable 1 }
RtgDpnMidTputMetricEntry ::= SEQUENCE {
rtgDpnMidTputMetricIndex
Integer32,
rtgDpnMidTputMetricValue
Unsigned32 }
rtgDpnMidTputMetricIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMidTputMetricTable."
::= { rtgDpnMidTputMetricEntry 1 }
rtgDpnMidTputMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnMidTputMetricTable."
::= { rtgDpnMidTputMetricEntry 2 }
rtgDpnMidDelayPathTrafficProportionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidDelayPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total delay
traffic flows to the destination which are sent over each delay path.
These percentages are achieved when there is a large number of
virtual circuits (VCs)."
::= { rtgDpnMid 332 }
rtgDpnMidDelayPathTrafficProportionsEntry OBJECT-TYPE
SYNTAX RtgDpnMidDelayPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidDelayPathTrafficProportionsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex,
rtgDpnMidDelayPathTrafficProportionsIndex }
::= { rtgDpnMidDelayPathTrafficProportionsTable 1 }
RtgDpnMidDelayPathTrafficProportionsEntry ::= SEQUENCE {
rtgDpnMidDelayPathTrafficProportionsIndex
Integer32,
rtgDpnMidDelayPathTrafficProportionsValue
Unsigned32 }
rtgDpnMidDelayPathTrafficProportionsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMidDelayPathTrafficProportionsTable."
::= { rtgDpnMidDelayPathTrafficProportionsEntry 1 }
rtgDpnMidDelayPathTrafficProportionsValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnMidDelayPathTrafficProportionsTable."
::= { rtgDpnMidDelayPathTrafficProportionsEntry 2 }
rtgDpnMidTputPathTrafficProportionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnMidTputPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total throughput
traffic flows to the destination which are sent over each throughput
path. These percentages are achieved when there is a large number
of virtual circuits (VCs)."
::= { rtgDpnMid 333 }
rtgDpnMidTputPathTrafficProportionsEntry OBJECT-TYPE
SYNTAX RtgDpnMidTputPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnMidTputPathTrafficProportionsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnMidIndex,
rtgDpnMidTputPathTrafficProportionsIndex }
::= { rtgDpnMidTputPathTrafficProportionsTable 1 }
RtgDpnMidTputPathTrafficProportionsEntry ::= SEQUENCE {
rtgDpnMidTputPathTrafficProportionsIndex
Integer32,
rtgDpnMidTputPathTrafficProportionsValue
Unsigned32 }
rtgDpnMidTputPathTrafficProportionsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnMidTputPathTrafficProportionsTable."
::= { rtgDpnMidTputPathTrafficProportionsEntry 1 }
rtgDpnMidTputPathTrafficProportionsValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnMidTputPathTrafficProportionsTable."
::= { rtgDpnMidTputPathTrafficProportionsEntry 2 }
rtgDpnCs OBJECT IDENTIFIER ::= { rtgDpn 4 }
rtgDpnCsRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnCs components."
::= { rtgDpnCs 1 }
rtgDpnCsRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnCsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnCs component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex }
::= { rtgDpnCsRowStatusTable 1 }
RtgDpnCsRowStatusEntry ::= SEQUENCE {
rtgDpnCsRowStatus
RowStatus,
rtgDpnCsComponentName
DisplayString,
rtgDpnCsStorageType
StorageType,
rtgDpnCsIndex
INTEGER }
rtgDpnCsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnCs components.
These components cannot be added nor deleted."
::= { rtgDpnCsRowStatusEntry 1 }
rtgDpnCsComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnCsRowStatusEntry 2 }
rtgDpnCsStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnCs tables."
::= { rtgDpnCsRowStatusEntry 4 }
rtgDpnCsIndex OBJECT-TYPE
SYNTAX INTEGER {
dcr(1),
nui(4),
crd(5),
lnui(6),
scr(7),
npm(8),
grman(10),
gscr(11),
gdcr(12),
lcr(14) }
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCs tables."
::= { rtgDpnCsRowStatusEntry 10 }
rtgDpnCsDelayNextHopLinkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsDelayNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay link group, or groups, that are
being used to reach a neighbor which is the next hop in the path to
the Call Server Resource Module (CSRM) supporting the server.
DPN server traffic will be load shared across the links, in up to two
link groups, when available. The link groups selected are those
associated with the two loop-free paths with the lowest delay
metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to a CSRM.
If no link groups are listed then the server is not reachable in the
delay class of service.
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it."
::= { rtgDpnCs 230 }
rtgDpnCsDelayNextHopLinkGroupsEntry OBJECT-TYPE
SYNTAX RtgDpnCsDelayNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCsDelayNextHopLinkGroupsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex,
rtgDpnCsDelayNextHopLinkGroupsIndex }
::= { rtgDpnCsDelayNextHopLinkGroupsTable 1 }
RtgDpnCsDelayNextHopLinkGroupsEntry ::= SEQUENCE {
rtgDpnCsDelayNextHopLinkGroupsIndex
Integer32,
rtgDpnCsDelayNextHopLinkGroupsValue
RowPointer }
rtgDpnCsDelayNextHopLinkGroupsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCsDelayNextHopLinkGroupsTable."
::= { rtgDpnCsDelayNextHopLinkGroupsEntry 1 }
rtgDpnCsDelayNextHopLinkGroupsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnCsDelayNextHopLinkGroupsTable."
::= { rtgDpnCsDelayNextHopLinkGroupsEntry 2 }
rtgDpnCsTputNextHopLinkGroupsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsTputNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput link group, or groups, that
are being used to reach a neighbor which is either the next hop in
the path to the Call Server Resource Module (CSRM) supporting
the server. DPN server traffic will be load shared across the links, in
up to two link groups, when available. The link groups selected are
those associated with the two loop-free paths with the lowest
throughput metrics to the destination.
The link group can be that of either a Passport node interconnection
or a gateway to the CSRM.
If no link groups are listed then the server is not reachable in the
throughput class of service.
Link group instances are managed by the TransportResource
component. Further information about the links in the group can be
obtained from it."
::= { rtgDpnCs 231 }
rtgDpnCsTputNextHopLinkGroupsEntry OBJECT-TYPE
SYNTAX RtgDpnCsTputNextHopLinkGroupsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCsTputNextHopLinkGroupsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex,
rtgDpnCsTputNextHopLinkGroupsIndex }
::= { rtgDpnCsTputNextHopLinkGroupsTable 1 }
RtgDpnCsTputNextHopLinkGroupsEntry ::= SEQUENCE {
rtgDpnCsTputNextHopLinkGroupsIndex
Integer32,
rtgDpnCsTputNextHopLinkGroupsValue
RowPointer }
rtgDpnCsTputNextHopLinkGroupsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCsTputNextHopLinkGroupsTable."
::= { rtgDpnCsTputNextHopLinkGroupsEntry 1 }
rtgDpnCsTputNextHopLinkGroupsValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnCsTputNextHopLinkGroupsTable."
::= { rtgDpnCsTputNextHopLinkGroupsEntry 2 }
rtgDpnCsDelayMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsDelayMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the delay metrics of up to two paths to the
server supported on a Call Server Resource Module (CSRM). The
delay metric associated with a path is computed by the routing
system based on the sum of the delays associated with the links in
the path to the CSRM supporting the server. It is computed for
every possible path to the server and is used by the DpnAddressPlan
component for path comparison purposes. A path with a lower
metric value is preferable to one with a higher value as it is
associated with lower delay facilities. The metrics displayed are
those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the server is
unreachable in the delay class of service. A metric value of
2147483647 for the second path only means that there is only one
viable delay path to the destination. A value of 0 indicates that no
cost is associated with the path to the destination."
::= { rtgDpnCs 334 }
rtgDpnCsDelayMetricEntry OBJECT-TYPE
SYNTAX RtgDpnCsDelayMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCsDelayMetricTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex,
rtgDpnCsDelayMetricIndex }
::= { rtgDpnCsDelayMetricTable 1 }
RtgDpnCsDelayMetricEntry ::= SEQUENCE {
rtgDpnCsDelayMetricIndex
Integer32,
rtgDpnCsDelayMetricValue
Unsigned32 }
rtgDpnCsDelayMetricIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCsDelayMetricTable."
::= { rtgDpnCsDelayMetricEntry 1 }
rtgDpnCsDelayMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnCsDelayMetricTable."
::= { rtgDpnCsDelayMetricEntry 2 }
rtgDpnCsTputMetricTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsTputMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the throughput metrics of up to two paths to
reach the server supported on a Call Server Resource Module
(CSRM). The throughput metric associated with a path is computed
by the routing system based on the sum of the bandwidth associated
with the links in the path to the CSRM supporting the server. It is
computed for every possible path to the server and is used by the
DpnAddressPlan component for path comparison purposes. A path
with a lower metric value is preferable to one with a higher value as
it is associated with higher bandwidth facilities. The metrics
displayed are those of the paths being used to reach the destination.
Metric values of 2147483647 for both paths means the server is
unreachable in the throughput class of service. A metric value of
2147483647 for the second path only means that there is only one
viable throughput path to the destination. A value of 0 indicates that
no cost is associated with the path to the destination."
::= { rtgDpnCs 335 }
rtgDpnCsTputMetricEntry OBJECT-TYPE
SYNTAX RtgDpnCsTputMetricEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCsTputMetricTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex,
rtgDpnCsTputMetricIndex }
::= { rtgDpnCsTputMetricTable 1 }
RtgDpnCsTputMetricEntry ::= SEQUENCE {
rtgDpnCsTputMetricIndex
Integer32,
rtgDpnCsTputMetricValue
Unsigned32 }
rtgDpnCsTputMetricIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCsTputMetricTable."
::= { rtgDpnCsTputMetricEntry 1 }
rtgDpnCsTputMetricValue OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnCsTputMetricTable."
::= { rtgDpnCsTputMetricEntry 2 }
rtgDpnCsDelayPathTrafficProportionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsDelayPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total delay
traffic flows to the destination which are sent over each delay path.
These percentages are achieved when there is a large number of
virtual circuits (VCs)."
::= { rtgDpnCs 336 }
rtgDpnCsDelayPathTrafficProportionsEntry OBJECT-TYPE
SYNTAX RtgDpnCsDelayPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCsDelayPathTrafficProportionsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex,
rtgDpnCsDelayPathTrafficProportionsIndex }
::= { rtgDpnCsDelayPathTrafficProportionsTable 1 }
RtgDpnCsDelayPathTrafficProportionsEntry ::= SEQUENCE {
rtgDpnCsDelayPathTrafficProportionsIndex
Integer32,
rtgDpnCsDelayPathTrafficProportionsValue
Unsigned32 }
rtgDpnCsDelayPathTrafficProportionsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCsDelayPathTrafficProportionsTable."
::= { rtgDpnCsDelayPathTrafficProportionsEntry 1 }
rtgDpnCsDelayPathTrafficProportionsValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnCsDelayPathTrafficProportionsTable."
::= { rtgDpnCsDelayPathTrafficProportionsEntry 2 }
rtgDpnCsTputPathTrafficProportionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnCsTputPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute indicates the target percentages of the total throughput
traffic flows to the destination which are sent over each throughput
path. These percentages are achieved when there is a large number
of virtual circuits (VCs)."
::= { rtgDpnCs 337 }
rtgDpnCsTputPathTrafficProportionsEntry OBJECT-TYPE
SYNTAX RtgDpnCsTputPathTrafficProportionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnCsTputPathTrafficProportionsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnCsIndex,
rtgDpnCsTputPathTrafficProportionsIndex }
::= { rtgDpnCsTputPathTrafficProportionsTable 1 }
RtgDpnCsTputPathTrafficProportionsEntry ::= SEQUENCE {
rtgDpnCsTputPathTrafficProportionsIndex
Integer32,
rtgDpnCsTputPathTrafficProportionsValue
Unsigned32 }
rtgDpnCsTputPathTrafficProportionsIndex OBJECT-TYPE
SYNTAX Integer32 (0..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnCsTputPathTrafficProportionsTable."
::= { rtgDpnCsTputPathTrafficProportionsEntry 1 }
rtgDpnCsTputPathTrafficProportionsValue OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
rtgDpnCsTputPathTrafficProportionsTable."
::= { rtgDpnCsTputPathTrafficProportionsEntry 2 }
rtgDpnLg OBJECT IDENTIFIER ::= { rtgDpn 5 }
rtgDpnLgRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnLgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnLg components."
::= { rtgDpnLg 1 }
rtgDpnLgRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnLgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnLg component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnLgIndex }
::= { rtgDpnLgRowStatusTable 1 }
RtgDpnLgRowStatusEntry ::= SEQUENCE {
rtgDpnLgRowStatus
RowStatus,
rtgDpnLgComponentName
DisplayString,
rtgDpnLgStorageType
StorageType,
rtgDpnLgIndex
AsciiStringIndex }
rtgDpnLgRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnLg components.
These components cannot be added nor deleted."
::= { rtgDpnLgRowStatusEntry 1 }
rtgDpnLgComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnLgRowStatusEntry 2 }
rtgDpnLgStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnLg tables."
::= { rtgDpnLgRowStatusEntry 4 }
rtgDpnLgIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..12))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnLg tables."
::= { rtgDpnLgRowStatusEntry 10 }
rtgDpnLgOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnLgOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes provides information about the gateways in
use to reach Passports, RMs and AMs connected to this Passport
node."
::= { rtgDpnLg 3 }
rtgDpnLgOperEntry OBJECT-TYPE
SYNTAX RtgDpnLgOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnLgOperTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnLgIndex }
::= { rtgDpnLgOperTable 1 }
RtgDpnLgOperEntry ::= SEQUENCE {
rtgDpnLgFarEndType
INTEGER,
rtgDpnLgFarEndRid
Unsigned32,
rtgDpnLgFarEndMid
Unsigned32,
rtgDpnLgDelayMetric
Unsigned32,
rtgDpnLgTputMetric
Unsigned32 }
rtgDpnLgFarEndType OBJECT-TYPE
SYNTAX INTEGER {
em(0),
rm(1),
am(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the type of the far end module (EM, AM or
RM)."
::= { rtgDpnLgOperEntry 1 }
rtgDpnLgFarEndRid OBJECT-TYPE
SYNTAX Unsigned32 (1..126)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the far end neighbor RID. If the neighbor is
an AM then the RID is that of the Passport node."
::= { rtgDpnLgOperEntry 2 }
rtgDpnLgFarEndMid OBJECT-TYPE
SYNTAX Unsigned32 (1..1910)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the far end neighbor MID."
::= { rtgDpnLgOperEntry 3 }
rtgDpnLgDelayMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the delay metric calculated for the link
group.
If the type of the far end switch is AM, the delay metric is
calculated for MID routing, ranging from 1 to 2147483647.
If the type of the far end switch is EM or RM, the delay metric,
ranging from 1 to 255, is based on the measured round trip delay of
the delay preferred links in the group. A link group with a low
metric value is preferable to one with a higher value as it is
associated with lower delay facilities."
::= { rtgDpnLgOperEntry 4 }
rtgDpnLgTputMetric OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the throughput metric calculated for the link
group.
If the type of the far end switch is AM, the throughput metric is
calculated for MID routing, ranging from 1 to 2147483647.
If the type of the far end switch is EM or RM, the throughput
metric, ranging from 1 to 255, is based on the sum of the bandwidth
available for all links in the group. A link group with a low metric
value is preferable to one with a higher value as it is associated with
higher bandwidth facilities."
::= { rtgDpnLgOperEntry 5 }
rtgDpnLpStats OBJECT IDENTIFIER ::= { rtgDpn 6 }
rtgDpnLpStatsRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnLpStatsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rtgDpnLpStats components."
::= { rtgDpnLpStats 1 }
rtgDpnLpStatsRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnLpStatsRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnLpStats component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnLpStatsIndex }
::= { rtgDpnLpStatsRowStatusTable 1 }
RtgDpnLpStatsRowStatusEntry ::= SEQUENCE {
rtgDpnLpStatsRowStatus
RowStatus,
rtgDpnLpStatsComponentName
DisplayString,
rtgDpnLpStatsStorageType
StorageType,
rtgDpnLpStatsIndex
Integer32 }
rtgDpnLpStatsRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnLpStats components.
These components cannot be added nor deleted."
::= { rtgDpnLpStatsRowStatusEntry 1 }
rtgDpnLpStatsComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnLpStatsRowStatusEntry 2 }
rtgDpnLpStatsStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnLpStats tables."
::= { rtgDpnLpStatsRowStatusEntry 4 }
rtgDpnLpStatsIndex OBJECT-TYPE
SYNTAX Integer32 (0..15)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnLpStats tables."
::= { rtgDpnLpStatsRowStatusEntry 10 }
rtgDpnLpStatsFwdStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnLpStatsFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group of attributes provides DPN packet forwarding statistics
for this LP. The statistics can be used to monitor the connectionless
traffic profile on this LP."
::= { rtgDpnLpStats 10 }
rtgDpnLpStatsFwdStatsEntry OBJECT-TYPE
SYNTAX RtgDpnLpStatsFwdStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnLpStatsFwdStatsTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnLpStatsIndex }
::= { rtgDpnLpStatsFwdStatsTable 1 }
RtgDpnLpStatsFwdStatsEntry ::= SEQUENCE {
rtgDpnLpStatsTotalPackets
PassportCounter64,
rtgDpnLpStatsThroughputPackets
PassportCounter64,
rtgDpnLpStatsDelayPackets
PassportCounter64,
rtgDpnLpStatsNormalReliabilityPackets
PassportCounter64,
rtgDpnLpStatsHighReliabilityPackets
PassportCounter64,
rtgDpnLpStatsDiscardNoRoute
PassportCounter64,
rtgDpnLpStatsInterruptingPackets
PassportCounter64,
rtgDpnLpStatsDiscardLpCongested
PassportCounter64 }
rtgDpnLpStatsTotalPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of delay and throughput
packets handled by DPN packet forwarding on this LP. Note that
DPRS packets leaving the network at this module are not counted.
The counter wraps to zero when the maximum value is exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 1 }
rtgDpnLpStatsThroughputPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the throughput packets handled by DPN packet
forwarding on this LP. Note that DPRS packets leaving the network
at this module are not counted. The counter wraps to zero when the
maximum value is exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 2 }
rtgDpnLpStatsDelayPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the delay packets handled by DPN packet
forwarding on this LP. Note that DPRS packets leaving the network
at this module are not counted. The counter wraps to zero when the
maximum value is exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 3 }
rtgDpnLpStatsNormalReliabilityPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the normal reliability packets handled by DPN
packet forwarding on this LP when the forwardingPolicy attribute
of Routing DpnAddressPlan is set to loadshare or loadspread. Note
that DPRS packets leaving the network at this module are not
counted. The counter wraps to zero when the maximum value is
exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 4 }
rtgDpnLpStatsHighReliabilityPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the high reliability packets handled by DPN
packet forwarding on this LP when the forwardingPolicy attribute
of Routing DpnAddressPlan is set to loadshare or loadspread. Note
that DPRS packets leaving the network at this module are not
counted. The counter wraps to zero when the maximum value is
exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 5 }
rtgDpnLpStatsDiscardNoRoute OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the packets discarded when DPN packet
forwarding has failed to find a route to forward the packets on this
LP. Note that DPRS packets leaving the network at this module are
not counted. The counter wraps to zero when the maximum value is
exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 6 }
rtgDpnLpStatsInterruptingPackets OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of multimedia packets
handled by DPN packet forwarding on this LP. Note that DPRS
packets leaving the network at this module are not counted. The
counter wraps to zero when the maximum value is exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 7 }
rtgDpnLpStatsDiscardLpCongested OBJECT-TYPE
SYNTAX PassportCounter64
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the packets that have been discarded by DPN
packet forwarding, on the entire module, due to congestion on this
LP. This value is the sum of the packets discarded by all LPs due to
insufficient shared memory on this one. Note that DPRS packets
leaving the network at this module are not counted. The counter
wraps to zero when the maximum value is exceeded."
::= { rtgDpnLpStatsFwdStatsEntry 8 }
rtgDpnRidFilter OBJECT IDENTIFIER ::= { rtgDpn 7 }
rtgDpnRidFilterRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidFilterRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rtgDpnRidFilter components."
::= { rtgDpnRidFilter 1 }
rtgDpnRidFilterRowStatusEntry OBJECT-TYPE
SYNTAX RtgDpnRidFilterRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rtgDpnRidFilter component."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidFilterIndex }
::= { rtgDpnRidFilterRowStatusTable 1 }
RtgDpnRidFilterRowStatusEntry ::= SEQUENCE {
rtgDpnRidFilterRowStatus
RowStatus,
rtgDpnRidFilterComponentName
DisplayString,
rtgDpnRidFilterStorageType
StorageType,
rtgDpnRidFilterIndex
Integer32 }
rtgDpnRidFilterRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rtgDpnRidFilter components.
These components can be added and deleted."
::= { rtgDpnRidFilterRowStatusEntry 1 }
rtgDpnRidFilterComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rtgDpnRidFilterRowStatusEntry 2 }
rtgDpnRidFilterStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rtgDpnRidFilter tables."
::= { rtgDpnRidFilterRowStatusEntry 4 }
rtgDpnRidFilterIndex OBJECT-TYPE
SYNTAX Integer32 (1..126)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rtgDpnRidFilter tables."
::= { rtgDpnRidFilterRowStatusEntry 10 }
rtgDpnRidFilterImportRidListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidFilterImportRidListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute specifies the list of RIDs whose reachability
information will be accepted from the instance RID. Information
about RIDs which do not appear in this list will be ignored and this
node considers those RIDs to be unreachable from the instance
RID. Note that this also applies to the instance RID itself, that is, if
the instance RID does not appear in the import list, this node
considers the instance RID to be unreachable from the instance
RID.
By default this list contains all valid RIDs, meaning that
information about all RIDs will be accepted from the instance RID.
When this list is empty, no RID information is accepted from the
instance RID, therefore, no RID traffic will be routed to it. A
warning is generated when an empty import list is detected.
RID 127 is the Network Services Sharing (NSS) RID, used to
identify DPN-100 nodes running call servers which can be used for
remote call processing. This RID can be filtered like any other using
the import RID list."
::= { rtgDpnRidFilter 303 }
rtgDpnRidFilterImportRidListEntry OBJECT-TYPE
SYNTAX RtgDpnRidFilterImportRidListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidFilterImportRidListTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidFilterIndex,
rtgDpnRidFilterImportRidListValue }
::= { rtgDpnRidFilterImportRidListTable 1 }
RtgDpnRidFilterImportRidListEntry ::= SEQUENCE {
rtgDpnRidFilterImportRidListValue
Integer32,
rtgDpnRidFilterImportRidListRowStatus
RowStatus }
rtgDpnRidFilterImportRidListValue OBJECT-TYPE
SYNTAX Integer32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rtgDpnRidFilterImportRidListTable."
::= { rtgDpnRidFilterImportRidListEntry 1 }
rtgDpnRidFilterImportRidListRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the rtgDpnRidFilterImportRidListTable."
::= { rtgDpnRidFilterImportRidListEntry 2 }
rtgDpnRidFilterExportRidListTable OBJECT-TYPE
SYNTAX SEQUENCE OF RtgDpnRidFilterExportRidListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute specifies the list of RIDs whose true reachability is
advertised to the instance RID. RIDs which do not appear in this list
are advertised to the instance RID as being unreachable from this
node.
By default, this list contains all valid RIDs, meaning that true
reachability information for all RIDs is advertised to the instance
RID.
When this list is empty, all RIDs will be advertised to the instance
RID as unreachable, including this node's own RID, therefore the
instance RID will not route any RID traffic to this RID. A warning
is generated when an empty export list is detected.
RID 127 is the Network Services Sharing (NSS) RID, used to
identify DPN-100 nodes running call servers which can be used for
remote call processing. This RID can be filtered like any other using
the import RID list."
::= { rtgDpnRidFilter 304 }
rtgDpnRidFilterExportRidListEntry OBJECT-TYPE
SYNTAX RtgDpnRidFilterExportRidListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rtgDpnRidFilterExportRidListTable."
INDEX {
rtgIndex,
rtgDpnIndex,
rtgDpnRidFilterIndex,
rtgDpnRidFilterExportRidListValue }
::= { rtgDpnRidFilterExportRidListTable 1 }
RtgDpnRidFilterExportRidListEntry ::= SEQUENCE {
rtgDpnRidFilterExportRidListValue
Integer32,
rtgDpnRidFilterExportRidListRowStatus
RowStatus }
rtgDpnRidFilterExportRidListValue OBJECT-TYPE
SYNTAX Integer32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rtgDpnRidFilterExportRidListTable."
::= { rtgDpnRidFilterExportRidListEntry 1 }
rtgDpnRidFilterExportRidListRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the rtgDpnRidFilterExportRidListTable."
::= { rtgDpnRidFilterExportRidListEntry 2 }
dpnRoutingGroup OBJECT IDENTIFIER ::= { dpnRoutingMIB 1 }
dpnRoutingGroupBE OBJECT IDENTIFIER ::= { dpnRoutingGroup 5 }
dpnRoutingGroupBE01 OBJECT IDENTIFIER ::= { dpnRoutingGroupBE 2 }
dpnRoutingGroupBE01A OBJECT IDENTIFIER ::= { dpnRoutingGroupBE01 2 }
dpnRoutingCapabilities OBJECT IDENTIFIER ::= { dpnRoutingMIB 3 }
dpnRoutingCapabilitiesBE OBJECT IDENTIFIER ::= { dpnRoutingCapabilities 5 }
dpnRoutingCapabilitiesBE01 OBJECT IDENTIFIER ::= { dpnRoutingCapabilitiesBE 2 }
dpnRoutingCapabilitiesBE01A OBJECT IDENTIFIER ::= { dpnRoutingCapabilitiesBE01 2 }
END