Nortel-Magellan-Passport-FrTraceRcvrMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
RowPointer,
DisplayString,
StorageType,
RowStatus,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
Hex,
NonReplicated,
HexString,
EnterpriseDateAndTime,
DigitString
FROM Nortel-Magellan-Passport-TextualConventionsMIB
traceSessionIndex,
traceRcvrIndex,
traceSession,
traceIndex,
traceRcvr
FROM Nortel-Magellan-Passport-TraceBaseMIB;
frTraceRcvrMIB OBJECT IDENTIFIER ::= { passportMIBs 139 }
traceRcvrFr OBJECT IDENTIFIER ::= { traceRcvr 3 }
traceRcvrFrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrFr components."
::= { traceRcvrFr 1 }
traceRcvrFrRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrFrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrFr component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex }
::= { traceRcvrFrRowStatusTable 1 }
TraceRcvrFrRowStatusEntry ::= SEQUENCE {
traceRcvrFrRowStatus
RowStatus,
traceRcvrFrComponentName
DisplayString,
traceRcvrFrStorageType
StorageType,
traceRcvrFrIndex
NonReplicated }
traceRcvrFrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrFr components.
These components can be added and deleted."
::= { traceRcvrFrRowStatusEntry 1 }
traceRcvrFrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrFrRowStatusEntry 2 }
traceRcvrFrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrFr tables."
::= { traceRcvrFrRowStatusEntry 4 }
traceRcvrFrIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrFr tables."
::= { traceRcvrFrRowStatusEntry 10 }
traceRcvrFrDna OBJECT IDENTIFIER ::= { traceRcvrFr 2 }
traceRcvrFrDnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrFrDna components."
::= { traceRcvrFrDna 1 }
traceRcvrFrDnaRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrFrDna component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex }
::= { traceRcvrFrDnaRowStatusTable 1 }
TraceRcvrFrDnaRowStatusEntry ::= SEQUENCE {
traceRcvrFrDnaRowStatus
RowStatus,
traceRcvrFrDnaComponentName
DisplayString,
traceRcvrFrDnaStorageType
StorageType,
traceRcvrFrDnaIndex
NonReplicated }
traceRcvrFrDnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrFrDna components.
These components cannot be added nor deleted."
::= { traceRcvrFrDnaRowStatusEntry 1 }
traceRcvrFrDnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrFrDnaRowStatusEntry 2 }
traceRcvrFrDnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrFrDna tables."
::= { traceRcvrFrDnaRowStatusEntry 4 }
traceRcvrFrDnaIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrFrDna tables."
::= { traceRcvrFrDnaRowStatusEntry 10 }
traceRcvrFrDnaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains attributes common to all Dnas. This group is
composed of two attributes which define a Dna. These attributes are
used to interpret the format of the address digits."
::= { traceRcvrFrDna 10 }
traceRcvrFrDnaAddressEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrFrDnaAddressTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex }
::= { traceRcvrFrDnaAddressTable 1 }
TraceRcvrFrDnaAddressEntry ::= SEQUENCE {
traceRcvrFrDnaNumberingPlanIndicator
INTEGER,
traceRcvrFrDnaDataNetworkAddress
DigitString }
traceRcvrFrDnaNumberingPlanIndicator OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Numbering Plan Indicator (NPI) of the
Dna that is entered. The address may belong to an E.164 or X.121
plan."
DEFVAL { x121 }
::= { traceRcvrFrDnaAddressEntry 1 }
traceRcvrFrDnaDataNetworkAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Dna attribute contains digits which form a unique identifier for
the calling end of the trace connection. Dna digits are selected and
assigned by network operators. The maximum Dna length is 15
digits."
::= { traceRcvrFrDnaAddressEntry 2 }
traceRcvrFrDnaOutgoingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines the call options for outgoing calls."
::= { traceRcvrFrDna 11 }
traceRcvrFrDnaOutgoingOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrFrDnaOutgoingOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex }
::= { traceRcvrFrDnaOutgoingOptionsTable 1 }
TraceRcvrFrDnaOutgoingOptionsEntry ::= SEQUENCE {
traceRcvrFrDnaOutCalls
INTEGER,
traceRcvrFrDnaOutDefaultPriority
INTEGER,
traceRcvrFrDnaOutIntl
INTEGER,
traceRcvrFrDnaOutDefaultPathReliability
INTEGER,
traceRcvrFrDnaOutPathReliabilityOverRide
INTEGER,
traceRcvrFrDnaOutPathReliabilitySignal
INTEGER,
traceRcvrFrDnaOutAccess
INTEGER }
traceRcvrFrDnaOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that outgoing calls (from the DTE to the
network) can be made using this particular Dna component."
DEFVAL { allowed }
::= { traceRcvrFrDnaOutgoingOptionsEntry 1 }
traceRcvrFrDnaOutDefaultPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this attribute is set to normal, then the default priority for
outgoing calls (from the DTE to the network) using this particular
Dna is normal priority when the priority is not specified in the call.
If this attribute is set to high then the default priority for outgoing
calls using this particular Dna is high priority."
DEFVAL { high }
::= { traceRcvrFrDnaOutgoingOptionsEntry 7 }
traceRcvrFrDnaOutIntl OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that outgoing international calls (from the
DTE to the network) can be made using this particular Dna.
This attribute also controls access to another numbering plan, and
specifies that cross-numbering plan calls are allowed."
DEFVAL { allowed }
::= { traceRcvrFrDnaOutgoingOptionsEntry 8 }
traceRcvrFrDnaOutDefaultPathReliability OBJECT-TYPE
SYNTAX INTEGER {
high(0),
normal(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default reliability class of routing for all
calls (from the DTE to the network) using this particular Dna. The
chosen default reliability class of routing normally applies to all
packets (including the call packets) travelling into the network.
A value of high specifies that packets are to be overflowed or
retransmitted at various routing levels. Typically high reliability
results in duplication and disordering of packets in the network,
when errors are detected or during link congestion. The VC handles
the duplication and disordering to ensure that packets are delivered
to the interface in the proper sequence and without duplication."
DEFVAL { high }
::= { traceRcvrFrDnaOutgoingOptionsEntry 14 }
traceRcvrFrDnaOutPathReliabilityOverRide OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that the called end of the connection will not
use the calling end provisioning data for reliability class of routing
to override the provisioning data at the called end."
DEFVAL { no }
::= { traceRcvrFrDnaOutgoingOptionsEntry 15 }
traceRcvrFrDnaOutPathReliabilitySignal OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that reliability routing signaling is not used."
DEFVAL { disallowed }
::= { traceRcvrFrDnaOutgoingOptionsEntry 16 }
traceRcvrFrDnaOutAccess OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is an extension of the Closed User Group (CUG)
facility. If this attribute is set to a value of allowed, it specifies that
outgoing calls (from the DTE to the network) to the open (non-
CUG) part of the network are permitted. It also permits outgoing
calls to interfaces that have Incoming Access capabilities. If set to a
value of disallowed, then such calls cannot be made using this Dna
(the calls will be cleared by the local DCE).
This attribute corresponds to the ITU-T 'Closed User Group with
Outgoing Access' feature."
DEFVAL { disallowed }
::= { traceRcvrFrDnaOutgoingOptionsEntry 17 }
traceRcvrFrDnaIncomingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines the call options for incoming calls."
::= { traceRcvrFrDna 12 }
traceRcvrFrDnaIncomingOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrFrDnaIncomingOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex }
::= { traceRcvrFrDnaIncomingOptionsTable 1 }
TraceRcvrFrDnaIncomingOptionsEntry ::= SEQUENCE {
traceRcvrFrDnaIncCalls
INTEGER }
traceRcvrFrDnaIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that incoming calls (from the network to the
DTE) cannot be made to this Dna."
DEFVAL { disallowed }
::= { traceRcvrFrDnaIncomingOptionsEntry 1 }
traceRcvrFrDnaCallOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaCallOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CallOptions group defines additional options for calls which
are not specific to the direction of the call."
::= { traceRcvrFrDna 13 }
traceRcvrFrDnaCallOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaCallOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrFrDnaCallOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex }
::= { traceRcvrFrDnaCallOptionsTable 1 }
TraceRcvrFrDnaCallOptionsEntry ::= SEQUENCE {
traceRcvrFrDnaPacketSizes
OCTET STRING,
traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize
INTEGER,
traceRcvrFrDnaDefaultSendToNetworkPacketSize
INTEGER,
traceRcvrFrDnaCugFormat
INTEGER }
traceRcvrFrDnaPacketSizes OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the allowable packet sizes supported for calls
using this Dna.
Description of bits:
n16(0)
n32(1)
n64(2)
n128(3)
n256(4)
n512(5)
n1024(6)
n2048(7)
n4096(8)"
DEFVAL { '0100'H }
::= { traceRcvrFrDnaCallOptionsEntry 2 }
traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE
SYNTAX INTEGER {
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default local receive packet size from
network to DTE for calls using this particular Dna."
DEFVAL { n2048 }
::= { traceRcvrFrDnaCallOptionsEntry 3 }
traceRcvrFrDnaDefaultSendToNetworkPacketSize OBJECT-TYPE
SYNTAX INTEGER {
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default local send packet size from DTE
to network for all calls using this particular Dna."
DEFVAL { n2048 }
::= { traceRcvrFrDnaCallOptionsEntry 4 }
traceRcvrFrDnaCugFormat OBJECT-TYPE
SYNTAX INTEGER {
basic(0),
extended(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the format to signal CUG indices as basic or
extended. A basic CUG index format is two digits long. An
extended CUG index format is four digits long."
DEFVAL { basic }
::= { traceRcvrFrDnaCallOptionsEntry 10 }
traceRcvrFrDnaCug OBJECT IDENTIFIER ::= { traceRcvrFrDna 2 }
traceRcvrFrDnaCugRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrFrDnaCug components."
::= { traceRcvrFrDnaCug 1 }
traceRcvrFrDnaCugRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrFrDnaCug component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex,
traceRcvrFrDnaCugIndex }
::= { traceRcvrFrDnaCugRowStatusTable 1 }
TraceRcvrFrDnaCugRowStatusEntry ::= SEQUENCE {
traceRcvrFrDnaCugRowStatus
RowStatus,
traceRcvrFrDnaCugComponentName
DisplayString,
traceRcvrFrDnaCugStorageType
StorageType,
traceRcvrFrDnaCugIndex
Integer32 }
traceRcvrFrDnaCugRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrFrDnaCug components.
These components can be added and deleted."
::= { traceRcvrFrDnaCugRowStatusEntry 1 }
traceRcvrFrDnaCugComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrFrDnaCugRowStatusEntry 2 }
traceRcvrFrDnaCugStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrFrDnaCug tables."
::= { traceRcvrFrDnaCugRowStatusEntry 4 }
traceRcvrFrDnaCugIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrFrDnaCug tables."
::= { traceRcvrFrDnaCugRowStatusEntry 10 }
traceRcvrFrDnaCugCugOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Attributes in this group define ClosedUserGroup options associated
with interlockCode. Dnas with the same CUG (interlockCode) can
make calls within this group. Various combinations of attributes are
defined under this option which permit or prevent calls in the same
CUG group."
::= { traceRcvrFrDnaCug 10 }
traceRcvrFrDnaCugCugOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrFrDnaCugCugOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDnaIndex,
traceRcvrFrDnaCugIndex }
::= { traceRcvrFrDnaCugCugOptionsTable 1 }
TraceRcvrFrDnaCugCugOptionsEntry ::= SEQUENCE {
traceRcvrFrDnaCugType
INTEGER,
traceRcvrFrDnaCugDnic
DigitString,
traceRcvrFrDnaCugInterlockCode
Unsigned32,
traceRcvrFrDnaCugPreferential
INTEGER,
traceRcvrFrDnaCugOutCalls
INTEGER,
traceRcvrFrDnaCugIncCalls
INTEGER,
traceRcvrFrDnaCugPrivileged
INTEGER }
traceRcvrFrDnaCugType OBJECT-TYPE
SYNTAX INTEGER {
national(0),
international(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the CUG type as either national or
international. A national CUG has significance within the local
network only. An international CUG has significance across
network boundaries."
DEFVAL { national }
::= { traceRcvrFrDnaCugCugOptionsEntry 1 }
traceRcvrFrDnaCugDnic OBJECT-TYPE
SYNTAX DigitString (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Data Network ID Code of the network
that is administering the international CUG. This attribute is not
used for a national CUG and should be left at its default value.
The dnic value is not an arbitrary number. It is assigned by
international agreement and controlled by ITU-T."
DEFVAL { '30303030'H }
::= { traceRcvrFrDnaCugCugOptionsEntry 2 }
traceRcvrFrDnaCugInterlockCode OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies a numeric identifier of a national or
international closed user group. It is an arbitrary number. This
attribute may also be called CUG in some descriptions. Dnas
defined with this number can only make calls to Dnas defined with
the same interlockCode."
DEFVAL { 0 }
::= { traceRcvrFrDnaCugCugOptionsEntry 3 }
traceRcvrFrDnaCugPreferential OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that this Cug is to be used on all outgoing
calls to the Frame Relay trace receiver."
DEFVAL { yes }
::= { traceRcvrFrDnaCugCugOptionsEntry 4 }
traceRcvrFrDnaCugOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that outgoing calls (from the DTE into the
network) can be made using this particular Cug."
DEFVAL { allowed }
::= { traceRcvrFrDnaCugCugOptionsEntry 5 }
traceRcvrFrDnaCugIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that incoming calls (from the network to the
DTE) cannot be accepted using this Cug."
DEFVAL { disallowed }
::= { traceRcvrFrDnaCugCugOptionsEntry 6 }
traceRcvrFrDnaCugPrivileged OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that this Cug is privileged. For a call
between two closed user group Dnas to connect, at least one Dna
must have a privileged Cug."
DEFVAL { yes }
::= { traceRcvrFrDnaCugCugOptionsEntry 7 }
traceRcvrFrDc OBJECT IDENTIFIER ::= { traceRcvrFr 3 }
traceRcvrFrDcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrFrDc components."
::= { traceRcvrFrDc 1 }
traceRcvrFrDcRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrFrDc component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDcIndex }
::= { traceRcvrFrDcRowStatusTable 1 }
TraceRcvrFrDcRowStatusEntry ::= SEQUENCE {
traceRcvrFrDcRowStatus
RowStatus,
traceRcvrFrDcComponentName
DisplayString,
traceRcvrFrDcStorageType
StorageType,
traceRcvrFrDcIndex
NonReplicated }
traceRcvrFrDcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrFrDc components.
These components cannot be added nor deleted."
::= { traceRcvrFrDcRowStatusEntry 1 }
traceRcvrFrDcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrFrDcRowStatusEntry 2 }
traceRcvrFrDcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrFrDc tables."
::= { traceRcvrFrDcRowStatusEntry 4 }
traceRcvrFrDcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrFrDc tables."
::= { traceRcvrFrDcRowStatusEntry 10 }
traceRcvrFrDcOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrFrDcOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Options group defines attributes associated with the SVC direct
call."
::= { traceRcvrFrDc 10 }
traceRcvrFrDcOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrFrDcOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrFrDcOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrFrIndex,
traceRcvrFrDcIndex }
::= { traceRcvrFrDcOptionsTable 1 }
TraceRcvrFrDcOptionsEntry ::= SEQUENCE {
traceRcvrFrDcRemoteNpi
INTEGER,
traceRcvrFrDcRemoteDna
DigitString,
traceRcvrFrDcType
INTEGER,
traceRcvrFrDcUserData
HexString }
traceRcvrFrDcRemoteNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the numbering plan used for the remoteDna."
DEFVAL { x121 }
::= { traceRcvrFrDcOptionsEntry 3 }
traceRcvrFrDcRemoteDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Data Network Address of the remote end
of the connection. This is the DNA of the Frame Relay trace
receiver which will receive the trace data."
::= { traceRcvrFrDcOptionsEntry 4 }
traceRcvrFrDcType OBJECT-TYPE
SYNTAX INTEGER {
switched(0),
permanentMaster(1),
permanentSlave(2),
permanentBackupSlave(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of call as switched. For a switched
call, no information is defined at the remote end about the local end
of the connection."
DEFVAL { switched }
::= { traceRcvrFrDcOptionsEntry 6 }
traceRcvrFrDcUserData OBJECT-TYPE
SYNTAX HexString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains the user data. It is a 0 to 16 byte length string
which is appended to the call request packet that is presented to the
called (destination) DTE."
DEFVAL { ''H }
::= { traceRcvrFrDcOptionsEntry 8 }
traceSessionFr OBJECT IDENTIFIER ::= { traceSession 3 }
traceSessionFrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionFrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
traceSessionFr components."
::= { traceSessionFr 1 }
traceSessionFrRowStatusEntry OBJECT-TYPE
SYNTAX TraceSessionFrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceSessionFr component."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionFrIndex }
::= { traceSessionFrRowStatusTable 1 }
TraceSessionFrRowStatusEntry ::= SEQUENCE {
traceSessionFrRowStatus
RowStatus,
traceSessionFrComponentName
DisplayString,
traceSessionFrStorageType
StorageType,
traceSessionFrIndex
NonReplicated }
traceSessionFrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceSessionFr components.
These components cannot be added nor deleted."
::= { traceSessionFrRowStatusEntry 1 }
traceSessionFrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceSessionFrRowStatusEntry 2 }
traceSessionFrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceSessionFr tables."
::= { traceSessionFrRowStatusEntry 4 }
traceSessionFrIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceSessionFr tables."
::= { traceSessionFrRowStatusEntry 10 }
traceSessionFrVc OBJECT IDENTIFIER ::= { traceSessionFr 2 }
traceSessionFrVcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionFrVcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
traceSessionFrVc components."
::= { traceSessionFrVc 1 }
traceSessionFrVcRowStatusEntry OBJECT-TYPE
SYNTAX TraceSessionFrVcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceSessionFrVc component."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionFrIndex,
traceSessionFrVcIndex }
::= { traceSessionFrVcRowStatusTable 1 }
TraceSessionFrVcRowStatusEntry ::= SEQUENCE {
traceSessionFrVcRowStatus
RowStatus,
traceSessionFrVcComponentName
DisplayString,
traceSessionFrVcStorageType
StorageType,
traceSessionFrVcIndex
NonReplicated }
traceSessionFrVcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceSessionFrVc components.
These components cannot be added nor deleted."
::= { traceSessionFrVcRowStatusEntry 1 }
traceSessionFrVcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceSessionFrVcRowStatusEntry 2 }
traceSessionFrVcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceSessionFrVc tables."
::= { traceSessionFrVcRowStatusEntry 4 }
traceSessionFrVcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceSessionFrVc tables."
::= { traceSessionFrVcRowStatusEntry 10 }
traceSessionFrVcCadTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionFrVcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group represents operational call data related to Frame Relay
Vc. It can be displayed only for Frame Relay Vc which is created by
application."
::= { traceSessionFrVc 10 }
traceSessionFrVcCadEntry OBJECT-TYPE
SYNTAX TraceSessionFrVcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionFrVcCadTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionFrIndex,
traceSessionFrVcIndex }
::= { traceSessionFrVcCadTable 1 }
TraceSessionFrVcCadEntry ::= SEQUENCE {
traceSessionFrVcType
INTEGER,
traceSessionFrVcState
INTEGER,
traceSessionFrVcPreviousState
INTEGER,
traceSessionFrVcDiagnosticCode
Unsigned32,
traceSessionFrVcPreviousDiagnosticCode
Unsigned32,
traceSessionFrVcCalledNpi
INTEGER,
traceSessionFrVcCalledDna
DigitString,
traceSessionFrVcCalledLcn
Unsigned32,
traceSessionFrVcCallingNpi
INTEGER,
traceSessionFrVcCallingDna
DigitString,
traceSessionFrVcCallingLcn
Unsigned32,
traceSessionFrVcAccountingEnabled
INTEGER,
traceSessionFrVcFastSelectCall
INTEGER,
traceSessionFrVcPathReliability
INTEGER,
traceSessionFrVcAccountingEnd
INTEGER,
traceSessionFrVcPriority
INTEGER,
traceSessionFrVcSegmentSize
Unsigned32,
traceSessionFrVcMaxSubnetPktSize
Unsigned32,
traceSessionFrVcRcosToNetwork
INTEGER,
traceSessionFrVcRcosFromNetwork
INTEGER,
traceSessionFrVcEmissionPriorityToNetwork
INTEGER,
traceSessionFrVcEmissionPriorityFromNetwork
INTEGER,
traceSessionFrVcDataPath
AsciiString }
traceSessionFrVcType OBJECT-TYPE
SYNTAX INTEGER {
svc(0),
pvc(1),
spvc(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the type of call, pvc,svc or spvc."
::= { traceSessionFrVcCadEntry 1 }
traceSessionFrVcState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the state of call control. P5 state is not
supported but is listed for completness. Transitions from one state to
another take very short time. state most often displayed is
dataTransferP4."
::= { traceSessionFrVcCadEntry 2 }
traceSessionFrVcPreviousState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the previous state of call control. This is a
valuable field to determine how the processing is progressing."
::= { traceSessionFrVcCadEntry 3 }
traceSessionFrVcDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { traceSessionFrVcCadEntry 4 }
traceSessionFrVcPreviousDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { traceSessionFrVcCadEntry 5 }
traceSessionFrVcCalledNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
called end."
::= { traceSessionFrVcCadEntry 6 }
traceSessionFrVcCalledDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
called (destination) DTE to which this call is sent. This address if
defined at recieving end will complete Vc connection."
::= { traceSessionFrVcCadEntry 7 }
traceSessionFrVcCalledLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the called
end. It is valid only after both ends of Vc exchanged relevant
information."
::= { traceSessionFrVcCadEntry 8 }
traceSessionFrVcCallingNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
calling end."
::= { traceSessionFrVcCadEntry 9 }
traceSessionFrVcCallingDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
calling end."
::= { traceSessionFrVcCadEntry 10 }
traceSessionFrVcCallingLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the calling
end."
::= { traceSessionFrVcCadEntry 11 }
traceSessionFrVcAccountingEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes(0),
no(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates that this optional section of accounting
record is suppressed or permitted. If accountingEnabled is yes,
conditions for generation of accounting record were met. These
conditions include billing options, vc recovery conditions and
Module wide accounting data options."
::= { traceSessionFrVcCadEntry 12 }
traceSessionFrVcFastSelectCall OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays that this is a fast select call."
::= { traceSessionFrVcCadEntry 13 }
traceSessionFrVcPathReliability OBJECT-TYPE
SYNTAX INTEGER {
high(0),
normal(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the path reliability."
::= { traceSessionFrVcCadEntry 19 }
traceSessionFrVcAccountingEnd OBJECT-TYPE
SYNTAX INTEGER {
callingEnd(0),
calledEnd(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if this end should generate an accounting
record. Normally, callingEnd is the end to generate an accounting
record."
::= { traceSessionFrVcCadEntry 20 }
traceSessionFrVcPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays whether the call is a normal or a high
priority call."
::= { traceSessionFrVcCadEntry 21 }
traceSessionFrVcSegmentSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the segment size (in bytes) used on the call.
It is used to calculate the number of segments transmitted and
received."
::= { traceSessionFrVcCadEntry 22 }
traceSessionFrVcMaxSubnetPktSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum packet size allowed on the Vc."
::= { traceSessionFrVcCadEntry 27 }
traceSessionFrVcRcosToNetwork OBJECT-TYPE
SYNTAX INTEGER {
throughput(0),
delay(1),
multimedia(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the routing metric routing class of service to
the network."
::= { traceSessionFrVcCadEntry 28 }
traceSessionFrVcRcosFromNetwork OBJECT-TYPE
SYNTAX INTEGER {
throughput(0),
delay(1),
multimedia(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the routing metric Routing Class of Service
from the Network."
::= { traceSessionFrVcCadEntry 29 }
traceSessionFrVcEmissionPriorityToNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1),
interrupting(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the network internal emission priotity to the
network."
::= { traceSessionFrVcCadEntry 30 }
traceSessionFrVcEmissionPriorityFromNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1),
interrupting(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the network internal emission priotity from
the network."
::= { traceSessionFrVcCadEntry 31 }
traceSessionFrVcDataPath OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the data path used by the connection. The
data path is provisioned in Dna and DirectCall components. The
displayed value of this attribute can be different from the
provisioned value.
If the connection is using dprsOnly data path, the string
dprsOnly is displayed. (dynamic packet routing system)
If the connection is using dprsMcsOnly data path, the string
dprsMcsOnly is displayed.
If the connection is using dprsMcsFirst data path, the string
dprsMcsFirst is displayed."
::= { traceSessionFrVcCadEntry 32 }
traceSessionFrVcIntdTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionFrVcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group defines display of interval data collected by Vc. Data in
this group is variable and may depend on time when this display
command is issued."
::= { traceSessionFrVc 11 }
traceSessionFrVcIntdEntry OBJECT-TYPE
SYNTAX TraceSessionFrVcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionFrVcIntdTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionFrIndex,
traceSessionFrVcIndex }
::= { traceSessionFrVcIntdTable 1 }
TraceSessionFrVcIntdEntry ::= SEQUENCE {
traceSessionFrVcCallReferenceNumber
Hex,
traceSessionFrVcElapsedTimeTillNow
Unsigned32,
traceSessionFrVcSegmentsRx
Unsigned32,
traceSessionFrVcSegmentsSent
Unsigned32,
traceSessionFrVcStartTime
EnterpriseDateAndTime }
traceSessionFrVcCallReferenceNumber OBJECT-TYPE
SYNTAX Hex (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call."
::= { traceSessionFrVcIntdEntry 1 }
traceSessionFrVcElapsedTimeTillNow OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
Vc started."
::= { traceSessionFrVcIntdEntry 2 }
traceSessionFrVcSegmentsRx OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments received at the time
command was issued. This is the segment received count
maintained by accounting at each end of the Vc. This counter is
updated only when the packet cannot be successfully delivered out
of the sink Vc and to the sink AP Conditions in which packets may
be discarded by the sink Vc include: missing packets due to subnet
discards, segmentation protocol violations due to subnet discard,
duplicated and out-of-ranged packets and packets that arrive while
Vc is in path recovery state."
::= { traceSessionFrVcIntdEntry 3 }
traceSessionFrVcSegmentsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments sent at the time
command was issued. This is the segment sent count maintained by
accounting at the source Vc. Vc only counts packets that Vc thinks
can be delivered successfully into the subnet. In reality, these
packets may be dropped by trunking, for instance. This counter is
not updated when splitting fails, when Vc is in a path recovery state,
when packet forwarding fails to forward this packet and when
subsequent packets have to be discarded as we want to minimize the
chance of out-of-sequence and do not intentionally send out-of-
sequenced packets into the subnet."
::= { traceSessionFrVcIntdEntry 4 }
traceSessionFrVcStartTime OBJECT-TYPE
SYNTAX EnterpriseDateAndTime (SIZE (0 | 19))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes."
::= { traceSessionFrVcIntdEntry 5 }
traceSessionFrVcFrdTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionFrVcFrdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group defines Frame Relay attributes collected by Frame Relay
Vc.
The purpose of Vc attributes is to aid end users and verification
people to understand the Vc internal behavior. This is particularly
useful when the network has experienced abnormality and we want
to isolate problems and pinpoint trouble spots.
Attributes are collected on a per Vc basis. Until a need is identified,
statistics are not collected at a processor level. Each attribute is
stored in a 32 bit field and is initialized to zero when a Vc enters
into the data transfer state. When a PVC is disconnected and then
connected again, the attributes will be reset. Attributes cannot be
reset through other methods.
Frame Relay Vc uses a best effort data packet delivery protocol and
a different packet segmentation and combination methods from the
General Vc. The Frame Relay Vc uses the same call setup and
control mechanism (e.g. the support of non-flow control data
packets) as in a General Vc. Most General Vc statistics and internal
variables are used in a Frame Relay Vc and are displayed by
software developers"
::= { traceSessionFrVc 12 }
traceSessionFrVcFrdEntry OBJECT-TYPE
SYNTAX TraceSessionFrVcFrdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionFrVcFrdTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionFrIndex,
traceSessionFrVcIndex }
::= { traceSessionFrVcFrdTable 1 }
TraceSessionFrVcFrdEntry ::= SEQUENCE {
traceSessionFrVcFrmCongestedToSubnet
Unsigned32,
traceSessionFrVcCannotForwardToSubnet
Unsigned32,
traceSessionFrVcNotDataXferToSubnet
Unsigned32,
traceSessionFrVcOutOfRangeFrmFromSubnet
Unsigned32,
traceSessionFrVcCombErrorsFromSubnet
Unsigned32,
traceSessionFrVcDuplicatesFromSubnet
Unsigned32,
traceSessionFrVcNotDataXferFromSubnet
Unsigned32,
traceSessionFrVcFrmLossTimeouts
Unsigned32,
traceSessionFrVcOoSeqByteCntExceeded
Unsigned32,
traceSessionFrVcPeakOoSeqPktCount
Unsigned32,
traceSessionFrVcPeakOoSeqFrmForwarded
Unsigned32,
traceSessionFrVcSendSequenceNumber
Unsigned32,
traceSessionFrVcPktRetryTimeouts
Unsigned32,
traceSessionFrVcPeakRetryQueueSize
Unsigned32,
traceSessionFrVcSubnetRecoveries
Unsigned32,
traceSessionFrVcOoSeqPktCntExceeded
Unsigned32,
traceSessionFrVcPeakOoSeqByteCount
Unsigned32 }
traceSessionFrVcFrmCongestedToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of frames from link discarded
due to lack of resources. It keeps track of the number of frames
from link that have to be discarded. The discard reasons include
insufficient memory for splitting the frame into smaller subnet
packet size."
::= { traceSessionFrVcFrdEntry 2 }
traceSessionFrVcCannotForwardToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of discarded packets that can not
be forwarded into the subnet because of subnet congestion.
Number of frames from link discarded due to failure in forwarding
a packet from Vc into the subnet.- This attribute is increased when
packet forwarding fails to forward a packet into the subnet. If a
frame is split into multiple subnet packets and a partial packet has
to be discarded, all subsequent partial packets that have not yet been
delivered to the subnet will be discarded as well."
::= { traceSessionFrVcFrdEntry 3 }
traceSessionFrVcNotDataXferToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute records the number of frames from link discarded
when the Vc tries to recover from internal path failure."
::= { traceSessionFrVcFrdEntry 4 }
traceSessionFrVcOutOfRangeFrmFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of frames from subnet discarded
due to out of sequence range for arriving too late."
::= { traceSessionFrVcFrdEntry 5 }
traceSessionFrVcCombErrorsFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute records the number of subnet packets discarded at the
sink Vc due to the Vc segmentation and combination protocol error.
Usually, this occurs when the subnet discards packets and thus this
statistics can be used to guest the number of subnet packets that are
not delivered to the Vc. It cannot be used as an actual measure
because some subnet packets may have been delivered to Vc but
have to be discarded because these are partial packets to a frame in
which some other partial packets have not been properly delivered
to Vc"
::= { traceSessionFrVcFrdEntry 6 }
traceSessionFrVcDuplicatesFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of subnet packets discarded due
to duplication. Although packets are not retransmitted by the Frame
Relay Vc, it is possible for the subnet to retransmit packets. When
packets are out-of-sequenced and copies of the same packets arrive,
then this attribute is increased."
::= { traceSessionFrVcFrdEntry 7 }
traceSessionFrVcNotDataXferFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of subnet packets discarded when
data transfer is suspended in Vc recovery."
::= { traceSessionFrVcFrdEntry 8 }
traceSessionFrVcFrmLossTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of lost frame timer expiries.
When this count is excessive, the network is very congested and
packets have been discarded in the subnet."
::= { traceSessionFrVcFrdEntry 9 }
traceSessionFrVcOoSeqByteCntExceeded OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number times that the out of sequence
byte threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count."
::= { traceSessionFrVcFrdEntry 10 }
traceSessionFrVcPeakOoSeqPktCount OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the frame relay peak packet count of the out
of sequence queue. This attribute records the maximum queue
length of the out-of-sequenced queue. The counter can be used to
deduce the message buffer requirement on a Vc."
::= { traceSessionFrVcFrdEntry 11 }
traceSessionFrVcPeakOoSeqFrmForwarded OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the frame relay peak size of the
sequence packet queue. The subnet may deliver packets out-of-
sequenced. These packets are then queued in an out-of-sequenced
queue, waiting for a packet with the expected sequence number to
come. When that packet arrives, this attribute records the maximum
number of packets that were out-of-sequenced, but now have
become in-sequenced. The statistics is used to measure expected
queue size due to normal subnet packet disorder (not due to subnet
packet discard). Current implementation also uses this statistics to
set a maximum size for the out-of-sequenced queue."
::= { traceSessionFrVcFrdEntry 12 }
traceSessionFrVcSendSequenceNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Vc internal packet's send sequence
number. Note that a 'packet' in this context, may be either a user
data packet, or an OAM frame."
::= { traceSessionFrVcFrdEntry 13 }
traceSessionFrVcPktRetryTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of packets which have
retransmission time-outs. When this count is excessive, the network
is very congested and packets have been discarded in the subnet."
::= { traceSessionFrVcFrdEntry 15 }
traceSessionFrVcPeakRetryQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the peak size of retransmission queue.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. Records the largest body of
unacknowledged packets."
::= { traceSessionFrVcFrdEntry 16 }
traceSessionFrVcSubnetRecoveries OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of successful Vc recovery
attempts."
::= { traceSessionFrVcFrdEntry 17 }
traceSessionFrVcOoSeqPktCntExceeded OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number times that the out of sequence
packet threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count."
::= { traceSessionFrVcFrdEntry 19 }
traceSessionFrVcPeakOoSeqByteCount OBJECT-TYPE
SYNTAX Unsigned32 (0..50000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the frame relay peak byte count of the out of
sequence queue. This attribute records the maximum queue length
of the out-of-sequenced queue. The counter can be used to deduce
the message buffer requirement on a Vc."
::= { traceSessionFrVcFrdEntry 20 }
traceSessionFrVcDmepTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionFrVcDmepEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute displays the data path used by the connection. Data
path is provisioned in Dna and DirectCall components.
If the connection is using dprsOnly data path, this attribute is
empty.
If the connection is using dprsMcsOnly or dprsMcsFirst data path,
this attribute displays component name of the dprsMcsEndPoint."
::= { traceSessionFrVc 417 }
traceSessionFrVcDmepEntry OBJECT-TYPE
SYNTAX TraceSessionFrVcDmepEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionFrVcDmepTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionFrIndex,
traceSessionFrVcIndex,
traceSessionFrVcDmepValue }
::= { traceSessionFrVcDmepTable 1 }
TraceSessionFrVcDmepEntry ::= SEQUENCE {
traceSessionFrVcDmepValue
RowPointer }
traceSessionFrVcDmepValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
traceSessionFrVcDmepTable."
::= { traceSessionFrVcDmepEntry 1 }
frTraceRcvrGroup OBJECT IDENTIFIER ::= { frTraceRcvrMIB 1 }
frTraceRcvrGroupBE OBJECT IDENTIFIER ::= { frTraceRcvrGroup 5 }
frTraceRcvrGroupBE01 OBJECT IDENTIFIER ::= { frTraceRcvrGroupBE 2 }
frTraceRcvrGroupBE01A OBJECT IDENTIFIER ::= { frTraceRcvrGroupBE01 2 }
frTraceRcvrCapabilities OBJECT IDENTIFIER ::= { frTraceRcvrMIB 3 }
frTraceRcvrCapabilitiesBE OBJECT IDENTIFIER ::= { frTraceRcvrCapabilities 5 }
frTraceRcvrCapabilitiesBE01 OBJECT IDENTIFIER ::= { frTraceRcvrCapabilitiesBE 2 }
frTraceRcvrCapabilitiesBE01A OBJECT IDENTIFIER ::= { frTraceRcvrCapabilitiesBE01 2 }
END