Nortel-Magellan-Passport-Frf5EpMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
RowPointer,
DisplayString,
StorageType,
RowStatus,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
NonReplicated,
HexString,
IntegerSequence
FROM Nortel-Magellan-Passport-TextualConventionsMIB
mcsMgrIndex,
mcsMgr
FROM Nortel-Magellan-Passport-McsMgrMIB;
frf5EpMIB OBJECT IDENTIFIER ::= { passportMIBs 121 }
mcsMgrFrf5EpG OBJECT IDENTIFIER ::= { mcsMgr 14 }
mcsMgrFrf5EpGRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
mcsMgrFrf5EpG components."
::= { mcsMgrFrf5EpG 1 }
mcsMgrFrf5EpGRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpG component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex }
::= { mcsMgrFrf5EpGRowStatusTable 1 }
McsMgrFrf5EpGRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGRowStatus
RowStatus,
mcsMgrFrf5EpGComponentName
DisplayString,
mcsMgrFrf5EpGStorageType
StorageType,
mcsMgrFrf5EpGIndex
Integer32 }
mcsMgrFrf5EpGRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpG components.
These components can be added and deleted."
::= { mcsMgrFrf5EpGRowStatusEntry 1 }
mcsMgrFrf5EpGComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGRowStatusEntry 2 }
mcsMgrFrf5EpGStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpG tables."
::= { mcsMgrFrf5EpGRowStatusEntry 4 }
mcsMgrFrf5EpGIndex OBJECT-TYPE
SYNTAX Integer32 (1..8191)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpG tables."
::= { mcsMgrFrf5EpGRowStatusEntry 10 }
mcsMgrFrf5EpGAddr OBJECT IDENTIFIER ::= { mcsMgrFrf5EpG 2 }
mcsMgrFrf5EpGAddrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
mcsMgrFrf5EpGAddr components."
::= { mcsMgrFrf5EpGAddr 1 }
mcsMgrFrf5EpGAddrRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGAddrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpGAddr component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGAddrIndex }
::= { mcsMgrFrf5EpGAddrRowStatusTable 1 }
McsMgrFrf5EpGAddrRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGAddrRowStatus
RowStatus,
mcsMgrFrf5EpGAddrComponentName
DisplayString,
mcsMgrFrf5EpGAddrStorageType
StorageType,
mcsMgrFrf5EpGAddrIndex
NonReplicated }
mcsMgrFrf5EpGAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpGAddr components.
These components cannot be added nor deleted."
::= { mcsMgrFrf5EpGAddrRowStatusEntry 1 }
mcsMgrFrf5EpGAddrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGAddrRowStatusEntry 2 }
mcsMgrFrf5EpGAddrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpGAddr tables."
::= { mcsMgrFrf5EpGAddrRowStatusEntry 4 }
mcsMgrFrf5EpGAddrIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpGAddr tables."
::= { mcsMgrFrf5EpGAddrRowStatusEntry 10 }
mcsMgrFrf5EpGAddrProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGAddrProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of the Address
component."
::= { mcsMgrFrf5EpGAddr 10 }
mcsMgrFrf5EpGAddrProvEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGAddrProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGAddrProvTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGAddrIndex }
::= { mcsMgrFrf5EpGAddrProvTable 1 }
McsMgrFrf5EpGAddrProvEntry ::= SEQUENCE {
mcsMgrFrf5EpGAddrRemoteAddress
AsciiString,
mcsMgrFrf5EpGAddrCommentText
AsciiString }
mcsMgrFrf5EpGAddrRemoteAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..44))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the ATM End System Address (AESA) in
the ISO NSAP format that is used by each EndPoint under this
Frf5EpG to establish a VCC. For example, NSAP ATM address
'45000006138292323F000000000020480D002900'."
::= { mcsMgrFrf5EpGAddrProvEntry 1 }
mcsMgrFrf5EpGAddrCommentText OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..750))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This optional attribute contains additional textual information to be
added by the network operator."
DEFVAL { ''H }
::= { mcsMgrFrf5EpGAddrProvEntry 2 }
mcsMgrFrf5EpGAddrAddrPreTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGAddrAddrPreEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute specifies the list of prefixes directed to the EndPoints
under this Frf5EndPointGroup. The individual end point is selected
for each subconnection on the basis of its
supportedTransferPriorities.
For example, E.164 prefix 'e.613722', X.121 prefix 'x.302'."
::= { mcsMgrFrf5EpGAddr 362 }
mcsMgrFrf5EpGAddrAddrPreEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGAddrAddrPreEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGAddrAddrPreTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGAddrIndex,
mcsMgrFrf5EpGAddrAddrPreValue }
::= { mcsMgrFrf5EpGAddrAddrPreTable 1 }
McsMgrFrf5EpGAddrAddrPreEntry ::= SEQUENCE {
mcsMgrFrf5EpGAddrAddrPreValue
AsciiString,
mcsMgrFrf5EpGAddrAddrPreRowStatus
RowStatus }
mcsMgrFrf5EpGAddrAddrPreValue OBJECT-TYPE
SYNTAX AsciiString (SIZE (3..17))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
mcsMgrFrf5EpGAddrAddrPreTable."
::= { mcsMgrFrf5EpGAddrAddrPreEntry 1 }
mcsMgrFrf5EpGAddrAddrPreRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the mcsMgrFrf5EpGAddrAddrPreTable."
::= { mcsMgrFrf5EpGAddrAddrPreEntry 2 }
mcsMgrFrf5EpGEp OBJECT IDENTIFIER ::= { mcsMgrFrf5EpG 3 }
mcsMgrFrf5EpGEpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
mcsMgrFrf5EpGEp components."
::= { mcsMgrFrf5EpGEp 1 }
mcsMgrFrf5EpGEpRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpGEp component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex }
::= { mcsMgrFrf5EpGEpRowStatusTable 1 }
McsMgrFrf5EpGEpRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpRowStatus
RowStatus,
mcsMgrFrf5EpGEpComponentName
DisplayString,
mcsMgrFrf5EpGEpStorageType
StorageType,
mcsMgrFrf5EpGEpIndex
Integer32 }
mcsMgrFrf5EpGEpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpGEp components.
These components can be added and deleted."
::= { mcsMgrFrf5EpGEpRowStatusEntry 1 }
mcsMgrFrf5EpGEpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGEpRowStatusEntry 2 }
mcsMgrFrf5EpGEpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpGEp tables."
::= { mcsMgrFrf5EpGEpRowStatusEntry 4 }
mcsMgrFrf5EpGEpIndex OBJECT-TYPE
SYNTAX Integer32 (0..15)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpGEp tables."
::= { mcsMgrFrf5EpGEpRowStatusEntry 10 }
mcsMgrFrf5EpGEpStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide."
::= { mcsMgrFrf5EpGEp 10 }
mcsMgrFrf5EpGEpStateEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpStateTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex }
::= { mcsMgrFrf5EpGEpStateTable 1 }
McsMgrFrf5EpGEpStateEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpAdminState
INTEGER,
mcsMgrFrf5EpGEpOperationalState
INTEGER,
mcsMgrFrf5EpGEpUsageState
INTEGER,
mcsMgrFrf5EpGEpAvailabilityStatus
OCTET STRING,
mcsMgrFrf5EpGEpProceduralStatus
OCTET STRING,
mcsMgrFrf5EpGEpControlStatus
OCTET STRING,
mcsMgrFrf5EpGEpAlarmStatus
OCTET STRING,
mcsMgrFrf5EpGEpStandbyStatus
INTEGER,
mcsMgrFrf5EpGEpUnknownStatus
INTEGER }
mcsMgrFrf5EpGEpAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { unlocked }
::= { mcsMgrFrf5EpGEpStateEntry 1 }
mcsMgrFrf5EpGEpOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { disabled }
::= { mcsMgrFrf5EpGEpStateEntry 2 }
mcsMgrFrf5EpGEpUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { idle }
::= { mcsMgrFrf5EpGEpStateEntry 3 }
mcsMgrFrf5EpGEpAvailabilityStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)"
::= { mcsMgrFrf5EpGEpStateEntry 4 }
mcsMgrFrf5EpGEpProceduralStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)"
::= { mcsMgrFrf5EpGEpStateEntry 5 }
mcsMgrFrf5EpGEpControlStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)"
::= { mcsMgrFrf5EpGEpStateEntry 6 }
mcsMgrFrf5EpGEpAlarmStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)"
::= { mcsMgrFrf5EpGEpStateEntry 7 }
mcsMgrFrf5EpGEpStandbyStatus OBJECT-TYPE
SYNTAX INTEGER {
hotStandby(0),
coldStandby(1),
providingService(2),
notSet(15) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource."
DEFVAL { notSet }
::= { mcsMgrFrf5EpGEpStateEntry 8 }
mcsMgrFrf5EpGEpUnknownStatus OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure."
DEFVAL { false }
::= { mcsMgrFrf5EpGEpStateEntry 9 }
mcsMgrFrf5EpGEpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational attributes for the FRF.5 ATM
connection."
::= { mcsMgrFrf5EpGEp 11 }
mcsMgrFrf5EpGEpOperEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpOperTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex }
::= { mcsMgrFrf5EpGEpOperTable 1 }
McsMgrFrf5EpGEpOperEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLastVccClearCause
Unsigned32,
mcsMgrFrf5EpGEpConnectionTransferPriority
Unsigned32,
mcsMgrFrf5EpGEpServiceCategory
INTEGER,
mcsMgrFrf5EpGEpPeakCellRate01
Unsigned32,
mcsMgrFrf5EpGEpSustainedCellRate0
Unsigned32,
mcsMgrFrf5EpGEpSustainedCellRate01
Unsigned32,
mcsMgrFrf5EpGEpMaximumBurstSize0
Unsigned32,
mcsMgrFrf5EpGEpMaximumBurstSize01
Unsigned32,
mcsMgrFrf5EpGEpAvgFrameSize
Unsigned32,
mcsMgrFrf5EpGEpTrafficParmConversionPolicy
INTEGER,
mcsMgrFrf5EpGEpType
INTEGER,
mcsMgrFrf5EpGEpLastVccCauseDiag
HexString }
mcsMgrFrf5EpGEpLastVccClearCause OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the clear cause value of the last SPVC
release message received on the FRF.5 end point Vcc pipe."
::= { mcsMgrFrf5EpGEpOperEntry 4 }
mcsMgrFrf5EpGEpConnectionTransferPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the transfer priority used to establish the
ATM connection and to multiplex the Frame Relay DLCIs."
::= { mcsMgrFrf5EpGEpOperEntry 5 }
mcsMgrFrf5EpGEpServiceCategory OBJECT-TYPE
SYNTAX INTEGER {
ubr(0),
cbr(1),
rtVbr(2),
nrtVbr(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the ATM service category that is used for
this connection."
::= { mcsMgrFrf5EpGEpOperEntry 6 }
mcsMgrFrf5EpGEpPeakCellRate01 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Peak Cell Rate (PCR) of the FRF.5 ATM
VCC for all cells (with CLP=0 and CLP=1).
The pcr01 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
::= { mcsMgrFrf5EpGEpOperEntry 8 }
mcsMgrFrf5EpGEpSustainedCellRate0 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5
ATM VCC for high priority cells (with CLP=0).
The scr0 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
::= { mcsMgrFrf5EpGEpOperEntry 9 }
mcsMgrFrf5EpGEpSustainedCellRate01 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Sustained Cell Rate (SCR) of the FRF.5
ATM VCC for all cells (with CLP=0 and CLP=1).
The scr01 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
::= { mcsMgrFrf5EpGEpOperEntry 10 }
mcsMgrFrf5EpGEpMaximumBurstSize0 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Maximum Burst Size (MBS) of the
FRF.5 ATM VCC for high priority cells (with CLP=0).
The mbs0 is derived from the End Point traffic parameters using the
conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
::= { mcsMgrFrf5EpGEpOperEntry 11 }
mcsMgrFrf5EpGEpMaximumBurstSize01 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Maximum Burst Size (MBS) of the
FRF.5 ATM VCC for all cells (with CLP=0 and CLP=1).
The mbs01 is derived from the End Point traffic parameters using
the conversion policy of the connectionTransferPriority. The
conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
::= { mcsMgrFrf5EpGEpOperEntry 12 }
mcsMgrFrf5EpGEpAvgFrameSize OBJECT-TYPE
SYNTAX Unsigned32 (1..8187)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the average frame size that is used in the
traffic parameter conversion policy calculations for this end point."
DEFVAL { 128 }
::= { mcsMgrFrf5EpGEpOperEntry 13 }
mcsMgrFrf5EpGEpTrafficParmConversionPolicy OBJECT-TYPE
SYNTAX INTEGER {
n3(3),
n4(4),
n5(5),
n6(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the traffic parameter conversion policy used
to specify the equivalent ATM bandwidth rate at this end point.
Policy 3 characterizes the traffic in the following way:
- ATM traffic descriptor type 6 is selected
- PCR0+1 is based on the AR
- SCR0+1 is based on the CIR and EIR
- MBS0+1 is based on Bc,Be,CIR,EIR and AR
- Takes into account that the instananeous rate of the frame relay
stream can burst above CIR and up tp the AR.
Policy 4 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected. Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer.
- PCR0+1 is based on the AR
- SCR0 is based on the CIR
- MBS0 is based on Bc,CIR and AR
- There is no direct characterization of EIR. The allowed EIR can be
derived using the difference between the AR and CIR.
Policy 5 characterizes the traffic in the following way:
- ATM traffic descriptor type 7 or 8 is selected . Type 7 is chosen
when non-conforming cells are to be discarded and type 8 when
non-conforming cells are tagged by UPC traffic policer
- PCR0+1 is based on CIR and EIR
- SCR0 is based on the CIR
- MBS0 is based on the Bc,CIR and AR
- The maximum PCR is no longer based on AR but based on the
CIR and EIR.
Policy 6 characterizes the traffic in the following way:
- ATM traffic descriptor type 3 is selected
- PCR0+1 is based only on CIR."
::= { mcsMgrFrf5EpGEpOperEntry 14 }
mcsMgrFrf5EpGEpType OBJECT-TYPE
SYNTAX INTEGER {
master(0),
slave(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the FRF.5 End Point type. If the value is
master, this End Point is responsible for initiating the call to set up
the FRF.5 ATM VCC. If the value is slave, this End Point receives
call setup requests from the remote end."
::= { mcsMgrFrf5EpGEpOperEntry 15 }
mcsMgrFrf5EpGEpLastVccCauseDiag OBJECT-TYPE
SYNTAX HexString (SIZE (1..8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the diagnostic value of the last SPVC release
message received on the FRF.5 end point Vcc pipe."
::= { mcsMgrFrf5EpGEpOperEntry 20 }
mcsMgrFrf5EpGEpLmi OBJECT IDENTIFIER ::= { mcsMgrFrf5EpGEp 2 }
mcsMgrFrf5EpGEpLmiRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpLmiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
mcsMgrFrf5EpGEpLmi components."
::= { mcsMgrFrf5EpGEpLmi 1 }
mcsMgrFrf5EpGEpLmiRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpLmiRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpGEpLmi component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpLmiIndex }
::= { mcsMgrFrf5EpGEpLmiRowStatusTable 1 }
McsMgrFrf5EpGEpLmiRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLmiRowStatus
RowStatus,
mcsMgrFrf5EpGEpLmiComponentName
DisplayString,
mcsMgrFrf5EpGEpLmiStorageType
StorageType,
mcsMgrFrf5EpGEpLmiIndex
NonReplicated }
mcsMgrFrf5EpGEpLmiRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpGEpLmi components.
These components can be added and deleted."
::= { mcsMgrFrf5EpGEpLmiRowStatusEntry 1 }
mcsMgrFrf5EpGEpLmiComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGEpLmiRowStatusEntry 2 }
mcsMgrFrf5EpGEpLmiStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpGEpLmi tables."
::= { mcsMgrFrf5EpGEpLmiRowStatusEntry 4 }
mcsMgrFrf5EpGEpLmiIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpGEpLmi tables."
::= { mcsMgrFrf5EpGEpLmiRowStatusEntry 10 }
mcsMgrFrf5EpGEpLmiParmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpLmiParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of the Local
Management Interface component."
::= { mcsMgrFrf5EpGEpLmi 10 }
mcsMgrFrf5EpGEpLmiParmsEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpLmiParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpLmiParmsTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpLmiIndex }
::= { mcsMgrFrf5EpGEpLmiParmsTable 1 }
McsMgrFrf5EpGEpLmiParmsEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLmiProcedures
INTEGER,
mcsMgrFrf5EpGEpLmiAsyncStatusReport
INTEGER,
mcsMgrFrf5EpGEpLmiErrorEventThreshold
Unsigned32,
mcsMgrFrf5EpGEpLmiEventCount
Unsigned32,
mcsMgrFrf5EpGEpLmiCheckPointTimer
Unsigned32,
mcsMgrFrf5EpGEpLmiSide
INTEGER }
mcsMgrFrf5EpGEpLmiProcedures OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ansi(2),
ccitt(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute selects the procedures to be used for the Local
Management Interface. The following are the supported procedures:
none: no Local Management Interface procedures are running on
the ATM VCC. This accomodates remote interworking functions
which do not implement LMI procedures. In this case, the
remaining attributes of this group will be ignored.
ccitt: Local Management Interface procedures from the CCITT
specification are supported. Dlci/0 is used for the LMI protocol, to
comply with FRF.5.
ansi: Local Management Interface procedures from the ANSI
specification are supported. DLCI 0 is used for the LMI protocol."
DEFVAL { ccitt }
::= { mcsMgrFrf5EpGEpLmiParmsEntry 1 }
mcsMgrFrf5EpGEpLmiAsyncStatusReport OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute selects the use of asynchronous PVC status report
procedures as specified in the CCITT specification (ITU-T Q.933,
Annex A), and the ANSI specification Annex D."
DEFVAL { on }
::= { mcsMgrFrf5EpGEpLmiParmsEntry 2 }
mcsMgrFrf5EpGEpLmiErrorEventThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"For the network side procedure, an event is defined as follows: (1)
receipt of a STATUS ENQUIRY message, or (2) expiration of timer
T392. An error event is (1) nonreceipt of STATUS ENQUIRY in
T392 seconds; (2) invalid format of an LMI message; (3) invalid
receive sequence number.
For the user side procedure, an event is defined as a polling cycle or
a status enquiry and status report exchange. An error event is (1)
non-receipt of a STATUS within the polling cycle, or (2) invalid
format of an LMI message, or (3) invalid sequence number.
This attribute specifies the number of error events which, if they
occur within eventCount events, will cause a protocol error
condition. The condition is cleared after eventCount sequential
correct events occur.
It must be less than or equal to eventCount (n393)."
DEFVAL { 3 }
::= { mcsMgrFrf5EpGEpLmiParmsEntry 3 }
mcsMgrFrf5EpGEpLmiEventCount OBJECT-TYPE
SYNTAX Unsigned32 (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the number of contiguous events within
which no more than eventErrorThreshold error events are allowed.
It must be greater than or equal to errorEventThreshold (n392)."
DEFVAL { 4 }
::= { mcsMgrFrf5EpGEpLmiParmsEntry 4 }
mcsMgrFrf5EpGEpLmiCheckPointTimer OBJECT-TYPE
SYNTAX Unsigned32 (5..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute selects the time (in seconds) within which a STATUS
ENQUIRY message is expected. It must be greater than
linkVerificationTimer (t391)."
DEFVAL { 200 }
::= { mcsMgrFrf5EpGEpLmiParmsEntry 5 }
mcsMgrFrf5EpGEpLmiSide OBJECT-TYPE
SYNTAX INTEGER {
network(0),
user(1),
both(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute selects the user side procedure (DTE), or the network
side procedure (DCE), or both the user side and the network side
procedures of the LMI.
This attribute can be set to user, network or both."
DEFVAL { both }
::= { mcsMgrFrf5EpGEpLmiParmsEntry 8 }
mcsMgrFrf5EpGEpLmiNniParmsTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpLmiNniParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of the FRF.5 LMI
procedures which are unique to NNI."
::= { mcsMgrFrf5EpGEpLmi 11 }
mcsMgrFrf5EpGEpLmiNniParmsEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpLmiNniParmsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpLmiNniParmsTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpLmiIndex }
::= { mcsMgrFrf5EpGEpLmiNniParmsTable 1 }
McsMgrFrf5EpGEpLmiNniParmsEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLmiFullStatusPollingCycles
Unsigned32,
mcsMgrFrf5EpGEpLmiLinkVerificationTimer
Unsigned32 }
mcsMgrFrf5EpGEpLmiFullStatusPollingCycles OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how frequently the FRF.5 LMI initiates a
Status Enquiry for a full PVC status report. A polling cycle is a
Status Enquiry and Status Report exchange."
DEFVAL { 1 }
::= { mcsMgrFrf5EpGEpLmiNniParmsEntry 1 }
mcsMgrFrf5EpGEpLmiLinkVerificationTimer OBJECT-TYPE
SYNTAX Unsigned32 (5..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how frequently the FRF.5 LMI initiates a
Status Enquiry for link integrity verification. It must be less than
checkPointTimer (t392)."
DEFVAL { 180 }
::= { mcsMgrFrf5EpGEpLmiNniParmsEntry 2 }
mcsMgrFrf5EpGEpLmiStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpLmiStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { mcsMgrFrf5EpGEpLmi 12 }
mcsMgrFrf5EpGEpLmiStateEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpLmiStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpLmiStateTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpLmiIndex }
::= { mcsMgrFrf5EpGEpLmiStateTable 1 }
McsMgrFrf5EpGEpLmiStateEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLmiAdminState
INTEGER,
mcsMgrFrf5EpGEpLmiOperationalState
INTEGER,
mcsMgrFrf5EpGEpLmiUsageState
INTEGER }
mcsMgrFrf5EpGEpLmiAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { mcsMgrFrf5EpGEpLmiStateEntry 1 }
mcsMgrFrf5EpGEpLmiOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { mcsMgrFrf5EpGEpLmiStateEntry 2 }
mcsMgrFrf5EpGEpLmiUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { mcsMgrFrf5EpGEpLmiStateEntry 3 }
mcsMgrFrf5EpGEpLmiPsiTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpLmiPsiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the protocol status of the Local Management
Interface."
::= { mcsMgrFrf5EpGEpLmi 13 }
mcsMgrFrf5EpGEpLmiPsiEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpLmiPsiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpLmiPsiTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpLmiIndex }
::= { mcsMgrFrf5EpGEpLmiPsiTable 1 }
McsMgrFrf5EpGEpLmiPsiEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLmiProtocolStatus
INTEGER }
mcsMgrFrf5EpGEpLmiProtocolStatus OBJECT-TYPE
SYNTAX INTEGER {
errorCondition(0),
normalCondition(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the LMI is in an error condition or
whether the protocol is behaving normally. This attribute will be set
to errorCondition after enough LMI errors have been detected to
warrant a change in condition. This occurs when n392 of the last
n393 events are in error.
The error condition is lifted when a sufficient number of
consecutive events has occurred without error. This occurs when
n393 consecutive good events take place.
The consequence of an error condition is that all DLCIs on this
interface will become inactive in both directions."
DEFVAL { normalCondition }
::= { mcsMgrFrf5EpGEpLmiPsiEntry 1 }
mcsMgrFrf5EpGEpLmiStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpLmiStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational statistics for the FRF.5 NNI
Local Management Interface."
::= { mcsMgrFrf5EpGEpLmi 14 }
mcsMgrFrf5EpGEpLmiStatsEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpLmiStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpLmiStatsTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpLmiIndex }
::= { mcsMgrFrf5EpGEpLmiStatsTable 1 }
McsMgrFrf5EpGEpLmiStatsEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpLmiKeepAliveStatusToInterface
Counter32,
mcsMgrFrf5EpGEpLmiFullStatusToInterface
Counter32,
mcsMgrFrf5EpGEpLmiKeepAliveStatusEnqFromInterface
Counter32,
mcsMgrFrf5EpGEpLmiFullStatusEnqFromInterface
Counter32,
mcsMgrFrf5EpGEpLmiNetworkSideEventHistory
AsciiString,
mcsMgrFrf5EpGEpLmiUserSideEventHistory
AsciiString,
mcsMgrFrf5EpGEpLmiProtocolErrors
Counter32,
mcsMgrFrf5EpGEpLmiUnexpectedIes
Counter32,
mcsMgrFrf5EpGEpLmiSequenceErrors
Counter32,
mcsMgrFrf5EpGEpLmiStatusSequenceErrors
Counter32,
mcsMgrFrf5EpGEpLmiUnexpectedReports
Counter32,
mcsMgrFrf5EpGEpLmiPollingVerifTimeouts
Counter32,
mcsMgrFrf5EpGEpLmiNoStatusReportCount
Counter32,
mcsMgrFrf5EpGEpLmiKeepAliveEnqToIf
Counter32,
mcsMgrFrf5EpGEpLmiFullStatusEnqToIf
Counter32 }
mcsMgrFrf5EpGEpLmiKeepAliveStatusToInterface OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Local Management Interface keep alive
status messages sent to the ATM VCC in response to a status
enquiry for keep alive status. When the maximum count is reached
it wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 1 }
mcsMgrFrf5EpGEpLmiFullStatusToInterface OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Local Management Interface full status
messages sent to the ATM VCC in response to a status enquiry for
keep alive or full status. When the maximum count is reached it
wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 2 }
mcsMgrFrf5EpGEpLmiKeepAliveStatusEnqFromInterface OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Local Management Interface valid keep
alive status enquiry messages received from the ATM VCC. When
the maximum count is reached it wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 3 }
mcsMgrFrf5EpGEpLmiFullStatusEnqFromInterface OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the Local Management Interface valid full
status enquiry messages received from the ATM VCC. When the
maximum count is reached it wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 4 }
mcsMgrFrf5EpGEpLmiNetworkSideEventHistory OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..10))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Local Management Interface network
side procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The left most
event is the most recent to occur. The provisioned eventCount
dictates the maximum number of events displayed. A good event is
triggered by receipt of a valid status enquiry message. An error
event is either a T392 timer expiry or receipt of a status enquiry
with an incorrect sequence number."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 5 }
mcsMgrFrf5EpGEpLmiUserSideEventHistory OBJECT-TYPE
SYNTAX AsciiString (SIZE (1..10))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Local Management Interface user side
procedure event history in order of occurrence. An event is
represented by a single symbol. A '+' symbol indicates a good
event. An 'X' symbol indicates a protocol error event. The left most
event is the most recent to occur. The provisioned eventCount
dictates the maximum number of events displayed. A good event is
triggered by receipt of a valid status message. An error event is
either a T391 timer expiry or receipt of a status message with an
incorrect sequence number."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 6 }
mcsMgrFrf5EpGEpLmiProtocolErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Management Interface
protocol errors. It is the sum of the sequence (sequenceErrors and
statusSequenceErrors) and timeout (pollingVerifTimeouts and
noStatusReportCount) errors. When the maximum count is reached
it wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 7 }
mcsMgrFrf5EpGEpLmiUnexpectedIes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Managament Interface
frames received with an Information Element identifier that is
unknown or unexpected. An unexpected Information Element is not
a protocol error. When the maximum count is reached, this counter
wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 8 }
mcsMgrFrf5EpGEpLmiSequenceErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Management Interface
Status Enquiry message sequence errors. A sequence error is receipt
of a Status Enquiry message with a receive sequence number not
equal to the last send sequence number. When the maximum count
is reached the counter wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 9 }
mcsMgrFrf5EpGEpLmiStatusSequenceErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Management Interface
Status message sequence errors. A sequence error is receipt of a
Status message with a receive sequence number not equal to the last
send sequence number. When the maximum count is reached the
counter wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 10 }
mcsMgrFrf5EpGEpLmiUnexpectedReports OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Management Interface
frames received with an unknown or unexpected report type. An
unexpected report type is not a protocol error. When the maximum
count is reached the counter wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 11 }
mcsMgrFrf5EpGEpLmiPollingVerifTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the checkPointTimer (T392) expiries occurring
on the Local Management Interface. When the maximum count is
reached the counter wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 12 }
mcsMgrFrf5EpGEpLmiNoStatusReportCount OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times when no status report or
an invalid status report comes from the external network. This
attribute is incremented:
i) after a status enquiry is sent out and the T391 timer expires
without having a status report received.
ii) if an invalid status report is received.
When the maximum count is reached it wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 13 }
mcsMgrFrf5EpGEpLmiKeepAliveEnqToIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Management Interface
keep alive enquiry status messages sent to the external user device
for keep alive status. When the maximum count is reached it wraps
to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 14 }
mcsMgrFrf5EpGEpLmiFullStatusEnqToIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of Local Management Interface
full status messages sent to the external user device in response to a
status enquiry for keep alive or full status. When the maximum
count is reached it wraps to zero."
::= { mcsMgrFrf5EpGEpLmiStatsEntry 15 }
mcsMgrFrf5EpGEpEpd OBJECT IDENTIFIER ::= { mcsMgrFrf5EpGEp 3 }
mcsMgrFrf5EpGEpEpdRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpEpdRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
mcsMgrFrf5EpGEpEpd components."
::= { mcsMgrFrf5EpGEpEpd 1 }
mcsMgrFrf5EpGEpEpdRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpEpdRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpGEpEpd component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpEpdIndex }
::= { mcsMgrFrf5EpGEpEpdRowStatusTable 1 }
McsMgrFrf5EpGEpEpdRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpEpdRowStatus
RowStatus,
mcsMgrFrf5EpGEpEpdComponentName
DisplayString,
mcsMgrFrf5EpGEpEpdStorageType
StorageType,
mcsMgrFrf5EpGEpEpdIndex
NonReplicated }
mcsMgrFrf5EpGEpEpdRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpGEpEpd components.
These components cannot be added nor deleted."
::= { mcsMgrFrf5EpGEpEpdRowStatusEntry 1 }
mcsMgrFrf5EpGEpEpdComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGEpEpdRowStatusEntry 2 }
mcsMgrFrf5EpGEpEpdStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpGEpEpd tables."
::= { mcsMgrFrf5EpGEpEpdRowStatusEntry 4 }
mcsMgrFrf5EpGEpEpdIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpGEpEpd tables."
::= { mcsMgrFrf5EpGEpEpdRowStatusEntry 10 }
mcsMgrFrf5EpGEpEpdProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpEpdProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of the FRF.5 End
Point."
::= { mcsMgrFrf5EpGEpEpd 10 }
mcsMgrFrf5EpGEpEpdProvEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpEpdProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpEpdProvTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpEpdIndex }
::= { mcsMgrFrf5EpGEpEpdProvTable 1 }
McsMgrFrf5EpGEpEpdProvEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpEpdRemoteConnectionIdentifier
IntegerSequence,
mcsMgrFrf5EpGEpEpdConnectionTransferPriority
Unsigned32,
mcsMgrFrf5EpGEpEpdCommittedInformationRate
Unsigned32,
mcsMgrFrf5EpGEpEpdExcessInformationRate
Unsigned32,
mcsMgrFrf5EpGEpEpdCommittedBurstSize
Unsigned32,
mcsMgrFrf5EpGEpEpdType
INTEGER,
mcsMgrFrf5EpGEpEpdAccessRate
Unsigned32,
mcsMgrFrf5EpGEpEpdExcessBurstSize
Unsigned32 }
mcsMgrFrf5EpGEpEpdRemoteConnectionIdentifier OBJECT-TYPE
SYNTAX IntegerSequence (SIZE (3..9))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the remote connection identifier. It either
represents the VPI.VCI logical channel number assignment of a
remote ATM interface, or the Endpoint.Frf5EndPointGroup
instances of a remote Passport FRF.5 EndPoint."
::= { mcsMgrFrf5EpGEpEpdProvEntry 3 }
mcsMgrFrf5EpGEpEpdConnectionTransferPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the transfer priority used to establish the
ATM connection. The EndPoint references the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component
to determine the ATM service category to be used by the
connection.
This attribute is also used to determine which EndPoint within an
Frf5EndPointGroup is to multiplex a particular FrAtm Dlci.
DESCRIPTION"
::= { mcsMgrFrf5EpGEpEpdProvEntry 4 }
mcsMgrFrf5EpGEpEpdCommittedInformationRate OBJECT-TYPE
SYNTAX Unsigned32 (0..50000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the committed information rate (CIR), and
represents the rate at which the network FRF.5 ATM VCC agrees to
transfer information under normal conditions. A conservative CIR
value would be the sum of the CIRs of all the individual FrAtm
Dlcis multiplexed by the VCC.
The cir is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
DEFVAL { 64000 }
::= { mcsMgrFrf5EpGEpEpdProvEntry 5 }
mcsMgrFrf5EpGEpEpdExcessInformationRate OBJECT-TYPE
SYNTAX Unsigned32 (0..50000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the excess information rate (EIR), and
represents the rate at which the network FRF.5 ATM VCC attempts
to transfer information. A conservative EIR value would be the sum
of the EIRs of all the individual FrAtm Dlcis multiplexed by the
VCC.
The eir is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
DEFVAL { 0 }
::= { mcsMgrFrf5EpGEpEpdProvEntry 6 }
mcsMgrFrf5EpGEpEpdCommittedBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (0..50000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the committed burst size (Bc), and represents
the amount of data that the network FRF.5 ATM VCC agrees to
transfer under normal conditions. A conservative Bc value would be
the sum of the Bcs of all the individual FrAtm Dlcis multiplexed by
the VCC.
The bc is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
DEFVAL { 16000 }
::= { mcsMgrFrf5EpGEpEpdProvEntry 7 }
mcsMgrFrf5EpGEpEpdType OBJECT-TYPE
SYNTAX INTEGER {
master(0),
slave(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the FRF.5 End Point type. If the value is
provisioned as master, this End Point is responsible for initiating
the SPVC call to set up the FRF.5 ATM VCC. If the value is
provisioned as slave, this End Point receives call setup requests
from a master remote end."
DEFVAL { master }
::= { mcsMgrFrf5EpGEpEpdProvEntry 8 }
mcsMgrFrf5EpGEpEpdAccessRate OBJECT-TYPE
SYNTAX Unsigned32 (0..50000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute represents the access rate of the FRF.5 EndPoint. A
conservative value would be the sum of the access rates of all the
FrAtms' that have DLCIs multiplexed by the VCC. The access rate
is converted into ATM service parameters when conversion policies
3, 4 and 5 are used. For policy 6, this attribute is ignored."
DEFVAL { 1536000 }
::= { mcsMgrFrf5EpGEpEpdProvEntry 9 }
mcsMgrFrf5EpGEpEpdExcessBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (0..50000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the excess burst size (Be), and represents the
amount of uncommitted data that the network FRF.5 ATM VCC
agrees to transfer under normal conditions. A conservative Be value
would be the sum of the Bes of all the individual FrAtm Dlcis
multiplexed by the VCC.
The be is converted into ATM service parameters according to the
conversion policy specified by the connectionTransferPriority
attribute. The conversion policy is defined under the ModuleData
FrameRelayService AtmNetworking TransferPriority/n component."
DEFVAL { 0 }
::= { mcsMgrFrf5EpGEpEpdProvEntry 10 }
mcsMgrFrf5EpGEpEpdCidDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpEpdCidDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs."
::= { mcsMgrFrf5EpGEpEpd 11 }
mcsMgrFrf5EpGEpEpdCidDataEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpEpdCidDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpEpdCidDataTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpEpdIndex }
::= { mcsMgrFrf5EpGEpEpdCidDataTable 1 }
McsMgrFrf5EpGEpEpdCidDataEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpEpdCustomerIdentifier
Unsigned32 }
mcsMgrFrf5EpGEpEpdCustomerIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..8191)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers."
DEFVAL { 0 }
::= { mcsMgrFrf5EpGEpEpdCidDataEntry 1 }
mcsMgrFrf5EpGEpDlci OBJECT IDENTIFIER ::= { mcsMgrFrf5EpGEp 4 }
mcsMgrFrf5EpGEpDlciRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpDlciRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
mcsMgrFrf5EpGEpDlci components."
::= { mcsMgrFrf5EpGEpDlci 1 }
mcsMgrFrf5EpGEpDlciRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpDlciRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpGEpDlci component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpDlciIndex }
::= { mcsMgrFrf5EpGEpDlciRowStatusTable 1 }
McsMgrFrf5EpGEpDlciRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpDlciRowStatus
RowStatus,
mcsMgrFrf5EpGEpDlciComponentName
DisplayString,
mcsMgrFrf5EpGEpDlciStorageType
StorageType,
mcsMgrFrf5EpGEpDlciIndex
Integer32 }
mcsMgrFrf5EpGEpDlciRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpGEpDlci components.
These components cannot be added nor deleted."
::= { mcsMgrFrf5EpGEpDlciRowStatusEntry 1 }
mcsMgrFrf5EpGEpDlciComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGEpDlciRowStatusEntry 2 }
mcsMgrFrf5EpGEpDlciStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpGEpDlci tables."
::= { mcsMgrFrf5EpGEpDlciRowStatusEntry 4 }
mcsMgrFrf5EpGEpDlciIndex OBJECT-TYPE
SYNTAX Integer32 (16..1007 | 1022)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpGEpDlci tables."
::= { mcsMgrFrf5EpGEpDlciRowStatusEntry 10 }
mcsMgrFrf5EpGEpDlciOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpDlciOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational attributes for the FRF.5 DLCI."
::= { mcsMgrFrf5EpGEpDlci 10 }
mcsMgrFrf5EpGEpDlciOperEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpDlciOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpDlciOperTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpDlciIndex }
::= { mcsMgrFrf5EpGEpDlciOperTable 1 }
McsMgrFrf5EpGEpDlciOperEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpDlciABitStatusToIf
INTEGER,
mcsMgrFrf5EpGEpDlciABitReasonToIf
INTEGER,
mcsMgrFrf5EpGEpDlciABitStatusFromIf
INTEGER,
mcsMgrFrf5EpGEpDlciABitReasonFromIf
INTEGER,
mcsMgrFrf5EpGEpDlciAccessConnectionComponent
AsciiString }
mcsMgrFrf5EpGEpDlciABitStatusToIf OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the most recent A-bit status sent to the ATM
VCC. If the value is inactive, the reason for the LMI failure is given
by the aBitReasonToNetwork."
DEFVAL { inactive }
::= { mcsMgrFrf5EpGEpDlciOperEntry 1 }
mcsMgrFrf5EpGEpDlciABitReasonToIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
remoteUserSignaled(1),
localLmiError(2),
remoteLmiError(3),
localLinkDown(4),
remoteLinkDown(5),
pvcDown(6) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the reason for the latest inactive A-bit status
sent to the ATM VCC.
The value is notApplicable when the aBitStatusToNetwork is active.
The value is remoteUserSignaled if the FrAtm originating the A-Bit
status has detected that the virtual circuit is down at the remote
network through the LMI protocol. The FrAtm must be running
network site LMI protocol for this A-Bit status reason to be sent.
The value is localLmiError if the LMI protocol is down at this Ep.
The value is remoteLmiError if the LMI protocol is down at the
FrAtm originating this A-Bit status reason.
The value is localLinkDown if the physical interface is disabled at
this Ep.
The value is pvcDown if no A-Bit status has been sent to this Ep
(i.e., no A-Bit status has been relayed from the FrAtm).
The value is remoteLinkDown if the physical interface is disabled
at the FrAtm originating this A-Bit status reason."
DEFVAL { notApplicable }
::= { mcsMgrFrf5EpGEpDlciOperEntry 2 }
mcsMgrFrf5EpGEpDlciABitStatusFromIf OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the most recent A-bit status received from
the ATM VCC. If the value is inactive, the reason for the LMI
failure is given by the aBitReasonFromNetwork."
DEFVAL { inactive }
::= { mcsMgrFrf5EpGEpDlciOperEntry 3 }
mcsMgrFrf5EpGEpDlciABitReasonFromIf OBJECT-TYPE
SYNTAX INTEGER {
notApplicable(0),
remoteUserSignalled(1),
localLmiError(2),
localLinkDown(4),
missingFromLmiReport(7) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attributes indicates the reason for the latest inactive A-bit
status received from the ATM VCC.
The value is notApplicable when the aBitStatusFromNetwork is
active.
The value is remoteUserSignaled if the remote FRF.5 End Point
originating the A-Bit status has detected that the virtual circuit is
down at the remote network through the LMI protocol. The remote
FRF.5 End Point must be running network site LMI protocol for this
A-Bit status reason to be sent.
The value is localLmiError if the LMI protocol is down at this Ep.
The value is localLinkDown if the physical interface is disabled at
this Ep.
The value is missingFromLmiReport if the remote FRF.5 End Point
did not provide a reason along with the inactive A-Bit status."
DEFVAL { notApplicable }
::= { mcsMgrFrf5EpGEpDlciOperEntry 4 }
mcsMgrFrf5EpGEpDlciAccessConnectionComponent OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..23))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute identifies the FrAtm Dlci to which this Dlci
component is bound."
::= { mcsMgrFrf5EpGEpDlciOperEntry 5 }
mcsMgrFrf5EpGEpAtmCon OBJECT IDENTIFIER ::= { mcsMgrFrf5EpGEp 5 }
mcsMgrFrf5EpGEpAtmConRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpAtmConRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
mcsMgrFrf5EpGEpAtmCon components."
::= { mcsMgrFrf5EpGEpAtmCon 1 }
mcsMgrFrf5EpGEpAtmConRowStatusEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpAtmConRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
mcsMgrFrf5EpGEpAtmCon component."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpAtmConIndex }
::= { mcsMgrFrf5EpGEpAtmConRowStatusTable 1 }
McsMgrFrf5EpGEpAtmConRowStatusEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpAtmConRowStatus
RowStatus,
mcsMgrFrf5EpGEpAtmConComponentName
DisplayString,
mcsMgrFrf5EpGEpAtmConStorageType
StorageType,
mcsMgrFrf5EpGEpAtmConIndex
NonReplicated }
mcsMgrFrf5EpGEpAtmConRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
mcsMgrFrf5EpGEpAtmCon components.
These components cannot be added nor deleted."
::= { mcsMgrFrf5EpGEpAtmConRowStatusEntry 1 }
mcsMgrFrf5EpGEpAtmConComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { mcsMgrFrf5EpGEpAtmConRowStatusEntry 2 }
mcsMgrFrf5EpGEpAtmConStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
mcsMgrFrf5EpGEpAtmCon tables."
::= { mcsMgrFrf5EpGEpAtmConRowStatusEntry 4 }
mcsMgrFrf5EpGEpAtmConIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the mcsMgrFrf5EpGEpAtmCon tables."
::= { mcsMgrFrf5EpGEpAtmConRowStatusEntry 10 }
mcsMgrFrf5EpGEpAtmConOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF McsMgrFrf5EpGEpAtmConOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute group contains the operational attributes for the
NapAtmConnection component."
::= { mcsMgrFrf5EpGEpAtmCon 10 }
mcsMgrFrf5EpGEpAtmConOperEntry OBJECT-TYPE
SYNTAX McsMgrFrf5EpGEpAtmConOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the mcsMgrFrf5EpGEpAtmConOperTable."
INDEX {
mcsMgrIndex,
mcsMgrFrf5EpGIndex,
mcsMgrFrf5EpGEpIndex,
mcsMgrFrf5EpGEpAtmConIndex }
::= { mcsMgrFrf5EpGEpAtmConOperTable 1 }
McsMgrFrf5EpGEpAtmConOperEntry ::= SEQUENCE {
mcsMgrFrf5EpGEpAtmConNextHop
RowPointer }
mcsMgrFrf5EpGEpAtmConNextHop OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute shows the component name of the AtmIf Vcc Ep or
AtmCon component to which this switched connection is
established."
::= { mcsMgrFrf5EpGEpAtmConOperEntry 1 }
frf5EpGroup OBJECT IDENTIFIER ::= { frf5EpMIB 1 }
frf5EpGroupBD OBJECT IDENTIFIER ::= { frf5EpGroup 4 }
frf5EpGroupBD02 OBJECT IDENTIFIER ::= { frf5EpGroupBD 3 }
frf5EpGroupBD02A OBJECT IDENTIFIER ::= { frf5EpGroupBD02 2 }
frf5EpCapabilities OBJECT IDENTIFIER ::= { frf5EpMIB 3 }
frf5EpCapabilitiesBD OBJECT IDENTIFIER ::= { frf5EpCapabilities 4 }
frf5EpCapabilitiesBD02 OBJECT IDENTIFIER ::= { frf5EpCapabilitiesBD 3 }
frf5EpCapabilitiesBD02A OBJECT IDENTIFIER ::= { frf5EpCapabilitiesBD02 2 }
END