Nortel-Magellan-Passport-IpiVcMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
IpAddress
FROM RFC1155-SMI
components,
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
DisplayString,
StorageType,
RowStatus,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
Hex,
NonReplicated,
EnterpriseDateAndTime,
DigitString
FROM Nortel-Magellan-Passport-TextualConventionsMIB;
ipiVcMIB OBJECT IDENTIFIER ::= { passportMIBs 53 }
ipivc OBJECT IDENTIFIER ::= { components 51 }
ipivcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
ipivc components."
::= { ipivc 1 }
ipivcRowStatusEntry OBJECT-TYPE
SYNTAX IpivcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
ipivc component."
INDEX {
ipivcIndex }
::= { ipivcRowStatusTable 1 }
IpivcRowStatusEntry ::= SEQUENCE {
ipivcRowStatus
RowStatus,
ipivcComponentName
DisplayString,
ipivcStorageType
StorageType,
ipivcIndex
NonReplicated }
ipivcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
ipivc components.
These components can be added and deleted."
::= { ipivcRowStatusEntry 1 }
ipivcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { ipivcRowStatusEntry 2 }
ipivcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
ipivc tables."
::= { ipivcRowStatusEntry 4 }
ipivcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the ipivc tables."
::= { ipivcRowStatusEntry 10 }
ipivcProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the IpiVc
component."
::= { ipivc 10 }
ipivcProvEntry OBJECT-TYPE
SYNTAX IpivcProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcProvTable."
INDEX {
ipivcIndex }
::= { ipivcProvTable 1 }
IpivcProvEntry ::= SEQUENCE {
ipivcIpAddress
IpAddress,
ipivcMaximumNumberOfLcn
Unsigned32 }
ipivcIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This IP Address represents the IP address of the IP interface."
DEFVAL { '00000000'H }
::= { ipivcProvEntry 1 }
ipivcMaximumNumberOfLcn OBJECT-TYPE
SYNTAX Unsigned32 (24)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute contains the maximum number of LCNs that can be
setup to the IP Interface over Vc. It defines the maximum number of
calls that the external network management systems can setup to
IpiVc simultaneously."
DEFVAL { 24 }
::= { ipivcProvEntry 2 }
ipivcDna OBJECT IDENTIFIER ::= { ipivc 2 }
ipivcDnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
ipivcDna components."
::= { ipivcDna 1 }
ipivcDnaRowStatusEntry OBJECT-TYPE
SYNTAX IpivcDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
ipivcDna component."
INDEX {
ipivcIndex,
ipivcDnaIndex }
::= { ipivcDnaRowStatusTable 1 }
IpivcDnaRowStatusEntry ::= SEQUENCE {
ipivcDnaRowStatus
RowStatus,
ipivcDnaComponentName
DisplayString,
ipivcDnaStorageType
StorageType,
ipivcDnaIndex
NonReplicated }
ipivcDnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
ipivcDna components.
These components cannot be added nor deleted."
::= { ipivcDnaRowStatusEntry 1 }
ipivcDnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { ipivcDnaRowStatusEntry 2 }
ipivcDnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
ipivcDna tables."
::= { ipivcDnaRowStatusEntry 4 }
ipivcDnaIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the ipivcDna tables."
::= { ipivcDnaRowStatusEntry 10 }
ipivcDnaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"DnaAddress group contains attributes common to all Dna's. Every
Dna used in the network is defined with this group 0f 2 attributes.
String of address digits is complemented by type of address and
Npi. These attributes are used to interpret format of the address
digits."
::= { ipivcDna 10 }
ipivcDnaAddressEntry OBJECT-TYPE
SYNTAX IpivcDnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcDnaAddressTable."
INDEX {
ipivcIndex,
ipivcDnaIndex }
::= { ipivcDnaAddressTable 1 }
IpivcDnaAddressEntry ::= SEQUENCE {
ipivcDnaNumberingPlanIndicator
INTEGER,
ipivcDnaDataNetworkAddress
DigitString }
ipivcDnaNumberingPlanIndicator OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the Numbering Plan Indicator (NPI) of the
Dna that is entered. Address may belong to X.121 or E.164 plans.
X.121 is used in packet svitched data networks."
DEFVAL { x121 }
::= { ipivcDnaAddressEntry 1 }
ipivcDnaDataNetworkAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Dna attribute contains digits which form unique identifier of the
customer. It is the equivalent of the telephone number in the
telephone network. MaximumLenOfDna is 15digits."
::= { ipivcDnaAddressEntry 2 }
ipivcDnaOutgoingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"DnaOutOptionsProv group defines call options of a Dna for calls
which are made out of the interface represented by Dna. All these
options are not used for calls arriving to the interface represented by
Dna."
::= { ipivcDna 11 }
ipivcDnaOutgoingOptionsEntry OBJECT-TYPE
SYNTAX IpivcDnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcDnaOutgoingOptionsTable."
INDEX {
ipivcIndex,
ipivcDnaIndex }
::= { ipivcDnaOutgoingOptionsTable 1 }
IpivcDnaOutgoingOptionsEntry ::= SEQUENCE {
ipivcDnaOutCalls
INTEGER,
ipivcDnaOutDefaultPathSensitivity
INTEGER,
ipivcDnaOutPathSensitivityOverRide
INTEGER,
ipivcDnaDefaultTransferPriority
INTEGER,
ipivcDnaTransferPriorityOverRide
INTEGER }
ipivcDnaOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that outgoing
calls (from the DTE to the network) can be made using this
particular DNA. If set to a value of disallowed, then outgoing calls
cannot be made using this DNA - such calls will be cleared by the
local DCE. This attribute corresponds to the CCITT 'Outgoing Calls
Barred' feature for DNAs in that outgoing calls are barred if this
attribute is set to a value of disallowed. Either outCalls, or incCalls
(or both) must be set to a value of allowed for this DNA to be
useable."
DEFVAL { disallowed }
::= { ipivcDnaOutgoingOptionsEntry 1 }
ipivcDnaOutDefaultPathSensitivity OBJECT-TYPE
SYNTAX INTEGER {
throughput(0),
delay(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute specifies the default class of path sensitivity to
network for all outgoing calls using this particular Dna. The chosen
default class of path sensitivity applies to all outgoing calls
established using this Dna.
This attribute, if set to a value of throughput, indicates that the
default class is throughput sensitive. If set to a value of delay, then
the default class is delay sensitive. The default of
outDefaultPathSensitivity is throughput."
DEFVAL { throughput }
::= { ipivcDnaOutgoingOptionsEntry 11 }
ipivcDnaOutPathSensitivityOverRide OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-write
STATUS obsolete
DESCRIPTION
"If this attribute is set to in the call request, the called end will use
the calling end provisioning data on path sensitivity to override its
own provisioning data.
The default of outPathSensitivityOverRide is no."
DEFVAL { no }
::= { ipivcDnaOutgoingOptionsEntry 12 }
ipivcDnaDefaultTransferPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(9) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default transfer priority to network for
all outgoing calls using this particular Dna. It is overRidden by
the transferPriority provisioned in the DLCI Direct Call sub-
component.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), routing metric (delay or
throughput).
When the transfer priority is set at high, the trunk queue is set to
high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, the routing metric is set to throughput.
The default of defaultTransferPriority is normal."
DEFVAL { normal }
::= { ipivcDnaOutgoingOptionsEntry 18 }
ipivcDnaTransferPriorityOverRide OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"When this attribute is set to yes, the called end will use the calling
end provisioning data on transfer priority to override its own
provisioning data. If it is set no, the called end will use its own
provisioning data on transfer priority.
For more information about transfer priority, please refer to the
previous attribute defaultTransferPriority.
The default of transferPriorityOverRide is no."
DEFVAL { no }
::= { ipivcDnaOutgoingOptionsEntry 19 }
ipivcDnaIncomingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"DnaIncOptions defines set of options for incoming calls. These
options are used for calls arriving to the interface represented by
Dna. For calls originated from the interfasce, IncomingOptions
attributes are not used."
::= { ipivcDna 12 }
ipivcDnaIncomingOptionsEntry OBJECT-TYPE
SYNTAX IpivcDnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcDnaIncomingOptionsTable."
INDEX {
ipivcIndex,
ipivcDnaIndex }
::= { ipivcDnaIncomingOptionsTable 1 }
IpivcDnaIncomingOptionsEntry ::= SEQUENCE {
ipivcDnaIncCalls
INTEGER,
ipivcDnaIncHighPriorityReverseCharge
INTEGER,
ipivcDnaIncNormalPriorityReverseCharge
INTEGER,
ipivcDnaIncIntlNormalCharge
INTEGER,
ipivcDnaIncIntlReverseCharge
INTEGER,
ipivcDnaIncFastSelect
INTEGER,
ipivcDnaIncSameService
INTEGER,
ipivcDnaIncChargeTransfer
INTEGER,
ipivcDnaIncAccess
INTEGER }
ipivcDnaIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) can be made to this DNA. If set
to a value of disallowed, then incoming calls cannot be made to this
DNA - such calls will be cleared by the local DCE. This attribute
corresponds to the CCITT 'Incoming Calls Barred' feature for
DNAs in that incoming calls are barred if this attribute is set to a
value of disallowed.
Either outCalls, or incCalls (or both) must be set to a value of
allowed for this DNA to be useable."
DEFVAL { allowed }
::= { ipivcDnaIncomingOptionsEntry 1 }
ipivcDnaIncHighPriorityReverseCharge OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
high priority, reverse charged calls (from the network to the DTE)
can be made to this DNA. If set to a value of disallowed, then such
calls cannot be made to this DNA - such calls will be cleared by the
local DCE.
This attribute, together with the
incNormalPriorityReverseChargeCalls attribute corresponds to the
CCITT 'Reverse Charging Acceptance' feature for DNAs in that
reverse charged calls are accepted if both attributes are set to a
value of allowed.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { allowed }
::= { ipivcDnaIncomingOptionsEntry 2 }
ipivcDnaIncNormalPriorityReverseCharge OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
normal priority, reverse charged calls (from the network to the
DTE) can be made to this DNA. If set to a value of disallowed, then
such calls cannot be made to this DNA - such calls will be cleared
by the local DCE.
This attribute, together with the
incHighPriorityReverseChargeCalls attribute corresponds to the
CCITT 'Reverse Charging Acceptance' feature for DNAs in that
reverse charged calls are accepted if both attributes are set to a
value of allowed.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { allowed }
::= { ipivcDnaIncomingOptionsEntry 3 }
ipivcDnaIncIntlNormalCharge OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
international normal charged calls (from the network to the DTE)
can be made to this DNA. If set to a value of disallowed, then such
calls cannot be made to this DNA - such calls will be cleared by the
local DCE.
This attribute also currently controls access to/from the E.164
numbering plan, and if set to a value of allowed, then cross-
numbering plan calls (also normal charged) are allowed.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { allowed }
::= { ipivcDnaIncomingOptionsEntry 4 }
ipivcDnaIncIntlReverseCharge OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
international reverse charged calls (from the network to the DTE)
can be made to this DNA. If set to a value of disallowed, then such
calls cannot be made to this DNA - such calls will be cleared by the
local DCE.
This attribute also currently controls access to/from the E.164
numbering plan, and if set to a value of allowed, then cross-
numbering plan calls (also normal charged) are allowed.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { allowed }
::= { ipivcDnaIncomingOptionsEntry 5 }
ipivcDnaIncFastSelect OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies whether fast select calls may be received.
This attribute, if set to a value of allowed indicates that incoming
fast select calls (from the network to the DTE) can be made to this
DNA. If set to a value of disallowed, then such calls cannot be
made to this DNA - such calls will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Fast Select Acceptance'
feature for DNAs in that incoming fast select calls are accepted if
this attribute is set to a value of allowed.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { disallowed }
::= { ipivcDnaIncomingOptionsEntry 6 }
ipivcDnaIncSameService OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
calls from the same service type (eg: X.25, ITI, SNA) (from the
network to the DTE) can be made to this DNA. If set to a value of
disallowed, then such calls cannot be made to this DNA - such calls
will be cleared by the local DCE.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { allowed }
::= { ipivcDnaIncomingOptionsEntry 7 }
ipivcDnaIncChargeTransfer OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of yes indicates that the charges for
incoming normal charged calls from a DTE with the same NIC
(calls from the network to the DTE) will be transferred to the called
DTE. If set to a value of no, then charges will not be transferred.
This attribute is ignored if the corresponding attribute, incCalls is
set to a value of disallowed."
DEFVAL { no }
::= { ipivcDnaIncomingOptionsEntry 8 }
ipivcDnaIncAccess OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is an extension of the Closed User Group (CUG)
facility, as follows:
This attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) from the open (non-CUG) part
of the network are permitted. It also permits incoming calls from
DTEs that have Outgoing Access capabilities. If set to a value of
disallowed, then such calls cannot be made to this DNA - such calls
will be cleared by the local DCE.
This attribute corresponds to the CCITT 'Closed User Group with
Incoming Access' feature for DNAs in that incoming access is
granted if this attribute is set to a value of allowed."
DEFVAL { disallowed }
::= { ipivcDnaIncomingOptionsEntry 9 }
ipivcDnaCallOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaCallOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"DnaCallOptions group defines additional options for calls not
related directly to direction of a call."
::= { ipivcDna 13 }
ipivcDnaCallOptionsEntry OBJECT-TYPE
SYNTAX IpivcDnaCallOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcDnaCallOptionsTable."
INDEX {
ipivcIndex,
ipivcDnaIndex }
::= { ipivcDnaCallOptionsTable 1 }
IpivcDnaCallOptionsEntry ::= SEQUENCE {
ipivcDnaServiceCategory
INTEGER,
ipivcDnaPacketSizes
OCTET STRING,
ipivcDnaDefaultRecvFrmNetworkPacketSize
INTEGER,
ipivcDnaDefaultSendToNetworkPacketSize
INTEGER,
ipivcDnaDefaultRecvFrmNetworkThruputClass
Unsigned32,
ipivcDnaDefaultSendToNetworkThruputClass
Unsigned32,
ipivcDnaDefaultRecvFrmNetworkWindowSize
Unsigned32,
ipivcDnaDefaultSendToNetworkWindowSize
Unsigned32,
ipivcDnaPacketSizeNegotiation
INTEGER,
ipivcDnaAccountClass
Unsigned32,
ipivcDnaServiceExchange
Unsigned32,
ipivcDnaCugFormat
INTEGER,
ipivcDnaCug0AsNonCugCall
INTEGER,
ipivcDnaFastSelectCallsOnly
INTEGER }
ipivcDnaServiceCategory OBJECT-TYPE
SYNTAX INTEGER {
gsp(0),
x25(1),
enhancedIti(2),
ncs(3),
mlti(4),
sm(5),
ici(6),
dsp3270(7),
iam(8),
mlhi(9),
term3270(10),
iti(11),
bsi(13),
hostIti(14),
x75(15),
hdsp3270(16),
api3201(20),
sdlc(21),
snaMultiHost(22),
redirectionServ(23),
trSnaTpad(24),
offnetNui(25),
gasServer(26),
vapServer(28),
vapAgent(29),
frameRelay(30),
ipiVc(31) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is computed based on the type of service within which
this DNA is configured. It is placed into the Service Category
attributes in the accounting record by both ends of the VC."
DEFVAL { ipiVc }
::= { ipivcDnaCallOptionsEntry 1 }
ipivcDnaPacketSizes OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the allowable packet sizes supported for
calls setup using this DNA. To set a given packet size to be allowed
on the DNA, the packet size is entered, and the corresponding bit in
the structure is set to a value of 1. To set a given packet size to be
disallowed on the DNA, the packet size is entered preceeded with
the '~' character, and the corresponding bit in the structure is set to a
value of 0. CCITT recommends that packet size 128 always be
supported.
Description of bits:
n16(0)
n32(1)
n64(2)
n128(3)
n256(4)
n512(5)
n1024(6)
n2048(7)
n4096(8)"
DEFVAL { '0100'H }
::= { ipivcDnaCallOptionsEntry 2 }
ipivcDnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE
SYNTAX INTEGER {
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the default local receive packet size from
network to DTE for all calls using this particular DNA."
DEFVAL { n2048 }
::= { ipivcDnaCallOptionsEntry 3 }
ipivcDnaDefaultSendToNetworkPacketSize OBJECT-TYPE
SYNTAX INTEGER {
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the default local send packet size from DTE
to network for all calls using this particular DNA."
DEFVAL { n2048 }
::= { ipivcDnaCallOptionsEntry 4 }
ipivcDnaDefaultRecvFrmNetworkThruputClass OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the default receive throughput class for all
calls using this particular DNA."
DEFVAL { 10 }
::= { ipivcDnaCallOptionsEntry 5 }
ipivcDnaDefaultSendToNetworkThruputClass OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the default send throughput class for all calls
using this particular DNA."
DEFVAL { 10 }
::= { ipivcDnaCallOptionsEntry 6 }
ipivcDnaDefaultRecvFrmNetworkWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the default number of data packets that can
be received by the DTE from the DCE before more packets can be
received. This view is oriented with respect to the DTE."
DEFVAL { 2 }
::= { ipivcDnaCallOptionsEntry 7 }
ipivcDnaDefaultSendToNetworkWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of data packets that can be
transmitted from the DTE to the DCE and must be acknowledged
before more packets can be transmitted."
DEFVAL { 2 }
::= { ipivcDnaCallOptionsEntry 8 }
ipivcDnaPacketSizeNegotiation OBJECT-TYPE
SYNTAX INTEGER {
endToEnd(0),
local(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of local indicates that packet sizes
can be negotiated locally at the interface irrespective of the remote
interface. If set to a value of endtoEnd, then local negotiation is not
permitted and packet sizes are negotiated between 2 ends of Vc."
DEFVAL { local }
::= { ipivcDnaCallOptionsEntry 9 }
ipivcDnaAccountClass OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the accounting class which is reserved for
network operations usage. Its value is returned in the accounting
record in the local and remote service type attributes. Use of this
attribute is decided by network operator.
This attribute is returned by the local VC in the accounting record
for all calls setup using this particular DNA."
DEFVAL { 0 }
::= { ipivcDnaCallOptionsEntry 10 }
ipivcDnaServiceExchange OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is an arbitrary number, Data Service Exchange, as
entered by the network operator and reported in accounting record.
It is converted into an internal 8-bit integer value for use in the
accounting record as well as in various X.25 and X.75 Tariff
utilities."
DEFVAL { 0 }
::= { ipivcDnaCallOptionsEntry 12 }
ipivcDnaCugFormat OBJECT-TYPE
SYNTAX INTEGER {
basic(0),
extended(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies which cug format is used when DTE signals
CUG indices, basic or extended.
This attribute, if set to a value of extended indicates that the DTE
signals and receives CUG indices in extended CUG format. If set
to a value of basic, then the DTE signals and receives CUG indices
in the basic CUG format."
DEFVAL { basic }
::= { ipivcDnaCallOptionsEntry 13 }
ipivcDnaCug0AsNonCugCall OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that when a
CUG index of 0 is signalled in a call request packet, the call is
treated as a non-CUG call. If this attribute is set to a value of
disallowed, then a CUG index of 0 is treated as an index, and an
attempt is made to find the particular CUG corresponding with the
DNA."
DEFVAL { disallowed }
::= { ipivcDnaCallOptionsEntry 14 }
ipivcDnaFastSelectCallsOnly OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of yes, indicates that the service is
permitted restricted fast select calls only in both the incoming and
the outgoing directions using this DNA. If set to a value of no, then
non fast select calls are permitted as well."
DEFVAL { no }
::= { ipivcDnaCallOptionsEntry 17 }
ipivcDnaCug OBJECT IDENTIFIER ::= { ipivcDna 2 }
ipivcDnaCugRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
ipivcDnaCug components."
::= { ipivcDnaCug 1 }
ipivcDnaCugRowStatusEntry OBJECT-TYPE
SYNTAX IpivcDnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
ipivcDnaCug component."
INDEX {
ipivcIndex,
ipivcDnaIndex,
ipivcDnaCugIndex }
::= { ipivcDnaCugRowStatusTable 1 }
IpivcDnaCugRowStatusEntry ::= SEQUENCE {
ipivcDnaCugRowStatus
RowStatus,
ipivcDnaCugComponentName
DisplayString,
ipivcDnaCugStorageType
StorageType,
ipivcDnaCugIndex
NonReplicated }
ipivcDnaCugRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
ipivcDnaCug components.
These components cannot be added nor deleted."
::= { ipivcDnaCugRowStatusEntry 1 }
ipivcDnaCugComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { ipivcDnaCugRowStatusEntry 2 }
ipivcDnaCugStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
ipivcDnaCug tables."
::= { ipivcDnaCugRowStatusEntry 4 }
ipivcDnaCugIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the ipivcDnaCug tables."
::= { ipivcDnaCugRowStatusEntry 10 }
ipivcDnaCugCugOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines options for Dna closed user group. Attributes in
this group define options associated with interlockCode. Dna's with
the same Cug (interlockCode) can make calls within this group.
Various combinations which permit or prevent calls in the same Cug
group are defined here."
::= { ipivcDnaCug 10 }
ipivcDnaCugCugOptionsEntry OBJECT-TYPE
SYNTAX IpivcDnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcDnaCugCugOptionsTable."
INDEX {
ipivcIndex,
ipivcDnaIndex,
ipivcDnaCugIndex }
::= { ipivcDnaCugCugOptionsTable 1 }
IpivcDnaCugCugOptionsEntry ::= SEQUENCE {
ipivcDnaCugType
INTEGER,
ipivcDnaCugDnic
DigitString,
ipivcDnaCugInterlockCode
Unsigned32,
ipivcDnaCugOutCalls
INTEGER,
ipivcDnaCugIncCalls
INTEGER,
ipivcDnaCugPrivileged
INTEGER }
ipivcDnaCugType OBJECT-TYPE
SYNTAX INTEGER {
national(0),
international(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the CUG type - the CUG is either a national
CUG, or an international CUG. International closed user groups are
usually established between DTEs for which there is an X.75
Gateway between; whereas national closed user groups are usually
established between DTEs for which there is no X.75 Gateway
between. (National CUGs cannot normally traverse an X.75
Gateway).
If this attribute is set to national, then the CUG is a national CUG,
in which case, the DNIC should be left at its default value of
BCD.0000 since it is not part of a national CUG. If this attribute is
set to international, then the CUG is an international CUG, in
which case, the DNIC should be set appropriately as part of the
CUG interlock code."
DEFVAL { national }
::= { ipivcDnaCugCugOptionsEntry 1 }
ipivcDnaCugDnic OBJECT-TYPE
SYNTAX DigitString (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the DNIC (Data Network ID Code) of the
Cug by which packet networks are identified if the Cug is an
International Cug - it is specified as 4 BCD digits. This attribute is
not applicable if the Cug is a National Cug, as specified by the Cug
TYPE attribute. There are usually 1 or 2 DNICs assigned per
country, for public networks. The U.S. is an exception where each
BOC has a DNIC. Also, a group of private networks can have its
own DNIC.
DNIC value is not an arbitrary number. It is assigned by
international aggreement and controlled by CCITT."
DEFVAL { '30303030'H }
::= { ipivcDnaCugCugOptionsEntry 2 }
ipivcDnaCugInterlockCode OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Cug Identifier of a national or
international Cug call. It is an arbitrary number and it also can be
called Cug in some descriptions. Interfaces (Dna's) defined with
this number can make calls to Dna's with the same interlockCode."
DEFVAL { 0 }
::= { ipivcDnaCugCugOptionsEntry 3 }
ipivcDnaCugOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that outgoing
calls (from the DTE into the network) can be made using this
particular CUG. If set to a value of disallowed, then outgoing calls
cannot be made using this CUG - such calls will be cleared by the
local DCE.
This attribute corresponds to the CCITT 'Outgoing Calls Barred'
feature for CUGs in that outgoing calls are barred if this attribute is
set to a value of disallowed."
DEFVAL { disallowed }
::= { ipivcDnaCugCugOptionsEntry 5 }
ipivcDnaCugIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) can be made using this
particular CUG. If set to a value of disallowed, then incoming calls
cannot be made using this CUG - such calls will be cleared by the
local DCE.
This attribute corresponds to the CCITT 'Incoming Calls Barred'
feature for CUGs in that incoming calls are barred if this attribute is
set to a value of disallowed."
DEFVAL { allowed }
::= { ipivcDnaCugCugOptionsEntry 6 }
ipivcDnaCugPrivileged OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of yes indicates that this CUG is a
privileged CUG. In DPN, at least one side of a call setup within a
CUG must have the CUG as a privileged CUG. If set to a value of
no, then the CUG is not privileged.
If both the local DTE and the remote DTE subscribe to the CUG,
but it is not privileged, then the call will be cleared. This attribute is
typically used for a host DTE which must accept calls from many
other DTEs in which case the other DTEs cannot call one another,
but can call the host. In this example, the host would have the
privileged CUG, and the other DTEs would belong to the same
CUG, but it would not be privileged."
DEFVAL { yes }
::= { ipivcDnaCugCugOptionsEntry 7 }
ipivcDr OBJECT IDENTIFIER ::= { ipivc 3 }
ipivcDrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
ipivcDr components."
::= { ipivcDr 1 }
ipivcDrRowStatusEntry OBJECT-TYPE
SYNTAX IpivcDrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
ipivcDr component."
INDEX {
ipivcIndex,
ipivcDrIndex }
::= { ipivcDrRowStatusTable 1 }
IpivcDrRowStatusEntry ::= SEQUENCE {
ipivcDrRowStatus
RowStatus,
ipivcDrComponentName
DisplayString,
ipivcDrStorageType
StorageType,
ipivcDrIndex
NonReplicated }
ipivcDrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
ipivcDr components.
These components can be added and deleted."
::= { ipivcDrRowStatusEntry 1 }
ipivcDrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { ipivcDrRowStatusEntry 2 }
ipivcDrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
ipivcDr tables."
::= { ipivcDrRowStatusEntry 4 }
ipivcDrIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the ipivcDr tables."
::= { ipivcDrRowStatusEntry 10 }
ipivcDrProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcDrProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for setting up a
default route on the IpiVc service."
::= { ipivcDr 10 }
ipivcDrProvEntry OBJECT-TYPE
SYNTAX IpivcDrProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcDrProvTable."
INDEX {
ipivcIndex,
ipivcDrIndex }
::= { ipivcDrProvTable 1 }
IpivcDrProvEntry ::= SEQUENCE {
ipivcDrCallingIpAddress
IpAddress,
ipivcDrCallingNumberingPlanIndicator
INTEGER,
ipivcDrCallingDataNetworkAddress
DigitString }
ipivcDrCallingIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The field specifies the IP Address of the remote end, which issues
the X.25 call."
DEFVAL { '00000000'H }
::= { ipivcDrProvEntry 1 }
ipivcDrCallingNumberingPlanIndicator OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the numbering plan of the address."
DEFVAL { x121 }
::= { ipivcDrProvEntry 2 }
ipivcDrCallingDataNetworkAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This field specifies the address (in Binary Coded Decimal BCD
format) assigned to the remote end."
::= { ipivcDrProvEntry 3 }
ipivcLcn OBJECT IDENTIFIER ::= { ipivc 4 }
ipivcLcnRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
ipivcLcn components."
::= { ipivcLcn 1 }
ipivcLcnRowStatusEntry OBJECT-TYPE
SYNTAX IpivcLcnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
ipivcLcn component."
INDEX {
ipivcIndex,
ipivcLcnIndex }
::= { ipivcLcnRowStatusTable 1 }
IpivcLcnRowStatusEntry ::= SEQUENCE {
ipivcLcnRowStatus
RowStatus,
ipivcLcnComponentName
DisplayString,
ipivcLcnStorageType
StorageType,
ipivcLcnIndex
Integer32 }
ipivcLcnRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
ipivcLcn components.
These components cannot be added nor deleted."
::= { ipivcLcnRowStatusEntry 1 }
ipivcLcnComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { ipivcLcnRowStatusEntry 2 }
ipivcLcnStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
ipivcLcn tables."
::= { ipivcLcnRowStatusEntry 4 }
ipivcLcnIndex OBJECT-TYPE
SYNTAX Integer32 (16..39)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the ipivcLcn tables."
::= { ipivcLcnRowStatusEntry 10 }
ipivcLcnStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes and the six OSI
Status attributes. The descriptions generically indicate what each
attribute implies about the component. Note that not all the values
and state combinations described here are supported by every
component which uses this group. For component-specific
information and the valid state combinations, refer to NTP 241-
7001-150, Passport Operations and Maintenance Guide."
::= { ipivcLcn 10 }
ipivcLcnStateEntry OBJECT-TYPE
SYNTAX IpivcLcnStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcLcnStateTable."
INDEX {
ipivcIndex,
ipivcLcnIndex }
::= { ipivcLcnStateTable 1 }
IpivcLcnStateEntry ::= SEQUENCE {
ipivcLcnAdminState
INTEGER,
ipivcLcnOperationalState
INTEGER,
ipivcLcnUsageState
INTEGER,
ipivcLcnAvailabilityStatus
OCTET STRING,
ipivcLcnProceduralStatus
OCTET STRING,
ipivcLcnControlStatus
OCTET STRING,
ipivcLcnAlarmStatus
OCTET STRING,
ipivcLcnStandbyStatus
INTEGER,
ipivcLcnUnknownStatus
INTEGER }
ipivcLcnAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { unlocked }
::= { ipivcLcnStateEntry 1 }
ipivcLcnOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { disabled }
::= { ipivcLcnStateEntry 2 }
ipivcLcnUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time.
The OSI Status attributes, if supported by the component, may
provide more details, qualifying the state of the component."
DEFVAL { idle }
::= { ipivcLcnStateEntry 3 }
ipivcLcnAvailabilityStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Availability status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value inTest indicates that the resource is undergoing a test
procedure. If adminState is locked or shuttingDown, the normal
users are precluded from using the resource and controlStatus is
reservedForTest. Tests that do not exclude additional users can be
present in any operational or administrative state but the
reservedForTest condition should not be present.
The value failed indicates that the component has an internal fault
that prevents it from operating. The operationalState is disabled.
The value dependency indicates that the component cannot operate
because some other resource on which it depends is unavailable.
The operationalState is disabled.
The value powerOff indicates the resource requires power to be
applied and it is not powered on. The operationalState is disabled.
The value offLine indicates the resource requires a routine
operation (either manual, automatic, or both) to be performed to
place it on-line and make it available for use. The operationalState
is disabled.
The value offDuty indicates the resource is inactive in accordance
with a predetermined time schedule. In the absence of other
disabling conditions, the operationalState is enabled or disabled.
The value degraded indicates the service provided by the
component is degraded in some way, such as in speed or operating
capacity. However, the resource remains available for service. The
operationalState is enabled.
The value notInstalled indicates the resource is not present. The
operationalState is disabled.
The value logFull is not used.
Description of bits:
inTest(0)
failed(1)
powerOff(2)
offLine(3)
offDuty(4)
dependency(5)
degraded(6)
notInstalled(7)
logFull(8)"
::= { ipivcLcnStateEntry 4 }
ipivcLcnProceduralStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Procedural status of the component. Note that, even though it is
defined as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value initializationRequired indicates (for a resource which
doesn't initialize autonomously) that initialization is required before
it can perform its normal functions, and this procedure has not been
initiated. The operationalState is disabled.
The value notInitialized indicates (for a resource which does
initialize autonomously) that initialization is required before it can
perform its normal functions, and this procedure has not been
initiated. The operationalState may be enabled or disabled.
The value initializing indicates that initialization has been initiated
but is not yet complete. The operationalState may be enabled or
disabled.
The value reporting indicates the resource has completed some
processing operation and is notifying the results. The
operationalState is enabled.
The value terminating indicates the component is in a termination
phase. If the resource doesn't reinitialize autonomously,
operationalState is disabled; otherwise it is enabled or disabled.
Description of bits:
initializationRequired(0)
notInitialized(1)
initializing(2)
reporting(3)
terminating(4)"
::= { ipivcLcnStateEntry 5 }
ipivcLcnControlStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Control status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value subjectToTest indicates the resource is available but tests
may be conducted simultaneously at unpredictable times, which
may cause it to exhibit unusual characteristics.
The value partOfServicesLocked indicates that part of the service is
restricted from users of a resource. The adminState is unlocked.
The value reservedForTest indicates that the component is
administratively unavailable because it is undergoing a test
procedure. The adminState is locked.
The value suspended indicates that the service has been
administratively suspended.
Description of bits:
subjectToTest(0)
partOfServicesLocked(1)
reservedForTest(2)
suspended(3)"
::= { ipivcLcnStateEntry 6 }
ipivcLcnAlarmStatus OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Alarm status of the component. Note that, even though it is defined
as a multi-valued set, at most one value is shown to the user.
When no values are in the set, this indicates that either the attribute
is not supported or that none of the status conditions described
below are present.
The value underRepair indicates the component is currently being
repaired. The operationalState is enabled or disabled.
The value critical indicates one or more critical alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value major indicates one or more major alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value minor indicates one or more minor alarms are
outstanding against the component. Other, less severe, alarms may
also be outstanding. The operationalState is enabled or disabled.
The value alarmOutstanding generically indicates that an alarm of
some severity is outstanding against the component.
Description of bits:
underRepair(0)
critical(1)
major(2)
minor(3)
alarmOutstanding(4)"
::= { ipivcLcnStateEntry 7 }
ipivcLcnStandbyStatus OBJECT-TYPE
SYNTAX INTEGER {
hotStandby(0),
coldStandby(1),
providingService(2),
notSet(15) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If supported by the component, this attribute indicates the OSI
Standby status of the component.
The value notSet indicates that either the attribute is not supported
or that none of the status conditions described below are present.
Note that this is a non-standard value, used because the original
specification indicated this attribute was set-valued and thus, did not
provide a value to indicate that none of the other three are
applicable.
The value hotStandby indicates that the resource is not providing
service but will be immediately able to take over the role of the
resource to be backed up, without initialization activity, and
containing the same information as the resource to be backed up.
The value coldStandby indicates the resource is a backup for
another resource but will not be immediately able to take over the
role of the backed up resource and will require some initialization
activity.
The value providingService indicates that this component, as a
backup resource, is currently backing up another resource."
DEFVAL { notSet }
::= { ipivcLcnStateEntry 8 }
ipivcLcnUnknownStatus OBJECT-TYPE
SYNTAX INTEGER {
false(0),
true(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Unknown status of the component.
The value false indicates that all of the other OSI State and Status
attribute values can be considered accurate.
The value true indicates that the actual state of the component is not
known for sure."
DEFVAL { false }
::= { ipivcLcnStateEntry 9 }
ipivcLcnOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains status of the internal IP network interface."
::= { ipivcLcn 11 }
ipivcLcnOperEntry OBJECT-TYPE
SYNTAX IpivcLcnOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcLcnOperTable."
INDEX {
ipivcIndex,
ipivcLcnIndex }
::= { ipivcLcnOperTable 1 }
IpivcLcnOperEntry ::= SEQUENCE {
ipivcLcnIpInterfaceDevice
INTEGER,
ipivcLcnDestinationIpAddress
IpAddress,
ipivcLcnPacketsSent
Counter32,
ipivcLcnPacketsReceived
Counter32,
ipivcLcnDiscardTxPackets
Counter32,
ipivcLcnDiscardRcvPackets
Counter32 }
ipivcLcnIpInterfaceDevice OBJECT-TYPE
SYNTAX INTEGER {
inactive(0),
active(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the internal IP network interface is inactive until an IP
packet is exchanged between a Network Management Station and
the internal IP network interface (via the LCN). At this point, the
status changes to active."
DEFVAL { inactive }
::= { ipivcLcnOperEntry 1 }
ipivcLcnDestinationIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the IP address of the remote network device
connected to this interface. The destinationIpAddress default is
0.0.0.0, until the first data packet is received from the remote end."
DEFVAL { '00000000'H }
::= { ipivcLcnOperEntry 2 }
ipivcLcnPacketsSent OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of IP packets sent from this
interface."
::= { ipivcLcnOperEntry 3 }
ipivcLcnPacketsReceived OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of IP packets received from the
remote network device."
::= { ipivcLcnOperEntry 4 }
ipivcLcnDiscardTxPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of IP packets destined to the
remote end which were discarded by the interface."
::= { ipivcLcnOperEntry 5 }
ipivcLcnDiscardRcvPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts number of IP packets received from the remote
end which were discarded by this interface."
::= { ipivcLcnOperEntry 6 }
ipivcLcnVc OBJECT IDENTIFIER ::= { ipivcLcn 2 }
ipivcLcnVcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnVcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
ipivcLcnVc components."
::= { ipivcLcnVc 1 }
ipivcLcnVcRowStatusEntry OBJECT-TYPE
SYNTAX IpivcLcnVcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
ipivcLcnVc component."
INDEX {
ipivcIndex,
ipivcLcnIndex,
ipivcLcnVcIndex }
::= { ipivcLcnVcRowStatusTable 1 }
IpivcLcnVcRowStatusEntry ::= SEQUENCE {
ipivcLcnVcRowStatus
RowStatus,
ipivcLcnVcComponentName
DisplayString,
ipivcLcnVcStorageType
StorageType,
ipivcLcnVcIndex
NonReplicated }
ipivcLcnVcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
ipivcLcnVc components.
These components cannot be added nor deleted."
::= { ipivcLcnVcRowStatusEntry 1 }
ipivcLcnVcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { ipivcLcnVcRowStatusEntry 2 }
ipivcLcnVcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
ipivcLcnVc tables."
::= { ipivcLcnVcRowStatusEntry 4 }
ipivcLcnVcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the ipivcLcnVc tables."
::= { ipivcLcnVcRowStatusEntry 10 }
ipivcLcnVcCadTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnVcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group represents operational call data related to General Vc. It
can be displayed only for General Vc which is created by
application."
::= { ipivcLcnVc 10 }
ipivcLcnVcCadEntry OBJECT-TYPE
SYNTAX IpivcLcnVcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcLcnVcCadTable."
INDEX {
ipivcIndex,
ipivcLcnIndex,
ipivcLcnVcIndex }
::= { ipivcLcnVcCadTable 1 }
IpivcLcnVcCadEntry ::= SEQUENCE {
ipivcLcnVcType
INTEGER,
ipivcLcnVcState
INTEGER,
ipivcLcnVcPreviousState
INTEGER,
ipivcLcnVcDiagnosticCode
Unsigned32,
ipivcLcnVcPreviousDiagnosticCode
Unsigned32,
ipivcLcnVcCalledNpi
INTEGER,
ipivcLcnVcCalledDna
DigitString,
ipivcLcnVcCalledLcn
Unsigned32,
ipivcLcnVcCallingNpi
INTEGER,
ipivcLcnVcCallingDna
DigitString,
ipivcLcnVcCallingLcn
Unsigned32,
ipivcLcnVcAccountingEnabled
INTEGER,
ipivcLcnVcFastSelectCall
INTEGER,
ipivcLcnVcLocalRxPktSize
INTEGER,
ipivcLcnVcLocalTxPktSize
INTEGER,
ipivcLcnVcLocalTxWindowSize
Unsigned32,
ipivcLcnVcLocalRxWindowSize
Unsigned32,
ipivcLcnVcPathReliability
INTEGER,
ipivcLcnVcAccountingEnd
INTEGER,
ipivcLcnVcPriority
INTEGER,
ipivcLcnVcSegmentSize
Unsigned32,
ipivcLcnVcSubnetTxPktSize
INTEGER,
ipivcLcnVcSubnetTxWindowSize
Unsigned32,
ipivcLcnVcSubnetRxPktSize
INTEGER,
ipivcLcnVcSubnetRxWindowSize
Unsigned32,
ipivcLcnVcMaxSubnetPktSize
Unsigned32,
ipivcLcnVcTransferPriorityToNetwork
INTEGER,
ipivcLcnVcTransferPriorityFromNetwork
INTEGER }
ipivcLcnVcType OBJECT-TYPE
SYNTAX INTEGER {
svc(0),
pvc(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the type of call, pvc or svc. type is provided
at provisioning time."
::= { ipivcLcnVcCadEntry 1 }
ipivcLcnVcState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the state of call control. P5 state is not
supported but is listed for completness. Transitions from one state to
another take very short time. state most often displayed is
dataTransferP4."
::= { ipivcLcnVcCadEntry 2 }
ipivcLcnVcPreviousState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the previous state of call control. This is a
valuable field to determine how the processing is progressing."
::= { ipivcLcnVcCadEntry 3 }
ipivcLcnVcDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { ipivcLcnVcCadEntry 4 }
ipivcLcnVcPreviousDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { ipivcLcnVcCadEntry 5 }
ipivcLcnVcCalledNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
called end."
::= { ipivcLcnVcCadEntry 6 }
ipivcLcnVcCalledDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
called (destination) DTE to which this call is sent. This address if
defined at recieving end will complete Vc connection."
::= { ipivcLcnVcCadEntry 7 }
ipivcLcnVcCalledLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the called
end. It is valid only after both ends of Vc exchanged relevant
information."
::= { ipivcLcnVcCadEntry 8 }
ipivcLcnVcCallingNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
calling end."
::= { ipivcLcnVcCadEntry 9 }
ipivcLcnVcCallingDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
calling end."
::= { ipivcLcnVcCadEntry 10 }
ipivcLcnVcCallingLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the calling
end."
::= { ipivcLcnVcCadEntry 11 }
ipivcLcnVcAccountingEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes(0),
no(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates that this optional section of accounting
record is suppressed or permitted. If accountingEnabled is yes,
conditions for generation of accounting record were met. These
conditions include billing options, vc recovery conditions and
Module wide accounting data options."
::= { ipivcLcnVcCadEntry 12 }
ipivcLcnVcFastSelectCall OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays that this is a fast select call."
::= { ipivcLcnVcCadEntry 13 }
ipivcLcnVcLocalRxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of send packets."
::= { ipivcLcnVcCadEntry 14 }
ipivcLcnVcLocalTxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of send packets."
::= { ipivcLcnVcCadEntry 15 }
ipivcLcnVcLocalTxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the send window size provided on incoming
call packets or the default when a call request packet does not
explicitly provide the window size."
::= { ipivcLcnVcCadEntry 16 }
ipivcLcnVcLocalRxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the receive window size provided on
incoming call packets or the default when a call request does not
explicitly provide the window sizes."
::= { ipivcLcnVcCadEntry 17 }
ipivcLcnVcPathReliability OBJECT-TYPE
SYNTAX INTEGER {
high(0),
normal(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the path reliability."
::= { ipivcLcnVcCadEntry 19 }
ipivcLcnVcAccountingEnd OBJECT-TYPE
SYNTAX INTEGER {
callingEnd(0),
calledEnd(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if this end should generate an accounting
record. Normally, callingEnd is the end to generate an accounting
record."
::= { ipivcLcnVcCadEntry 20 }
ipivcLcnVcPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays whether the call is a normal or a high
priority call."
::= { ipivcLcnVcCadEntry 21 }
ipivcLcnVcSegmentSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the segment size (in bytes) used on the call.
It is used to calculate the number of segments transmitted and
received."
::= { ipivcLcnVcCadEntry 22 }
ipivcLcnVcSubnetTxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of the data packets
on this Vc."
::= { ipivcLcnVcCadEntry 23 }
ipivcLcnVcSubnetTxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the current send window size of Vc."
::= { ipivcLcnVcCadEntry 24 }
ipivcLcnVcSubnetRxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of receive packets."
::= { ipivcLcnVcCadEntry 25 }
ipivcLcnVcSubnetRxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the receive window size provided on
incoming call packets and to the default when a call request does
not explicitly provide the window sizes."
::= { ipivcLcnVcCadEntry 26 }
ipivcLcnVcMaxSubnetPktSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the maximum packet size allowed on Vc."
::= { ipivcLcnVcCadEntry 27 }
ipivcLcnVcTransferPriorityToNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the priority in which data is transferred to the
network.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), and routing metric (delay
or throughput).
When the transfer priority is set at high, the trunk queue is set to
high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, the routing metric is set to throughput."
::= { ipivcLcnVcCadEntry 28 }
ipivcLcnVcTransferPriorityFromNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the priority in which data is transferred from
the network.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), and routing metric (delay
or throughput).
When the transfer priority is set at high, and the trunk queue is set
to high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, and the routing metric is set to throughput."
::= { ipivcLcnVcCadEntry 29 }
ipivcLcnVcIntdTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnVcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group defines display of interval data collected by Vc. Data in
this group is variable and may depend on time when this display
command is issued."
::= { ipivcLcnVc 11 }
ipivcLcnVcIntdEntry OBJECT-TYPE
SYNTAX IpivcLcnVcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcLcnVcIntdTable."
INDEX {
ipivcIndex,
ipivcLcnIndex,
ipivcLcnVcIndex }
::= { ipivcLcnVcIntdTable 1 }
IpivcLcnVcIntdEntry ::= SEQUENCE {
ipivcLcnVcCallReferenceNumber
Hex,
ipivcLcnVcElapsedTimeTillNow
Unsigned32,
ipivcLcnVcSegmentsRx
Unsigned32,
ipivcLcnVcSegmentsSent
Unsigned32,
ipivcLcnVcStartTime
EnterpriseDateAndTime }
ipivcLcnVcCallReferenceNumber OBJECT-TYPE
SYNTAX Hex (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call."
::= { ipivcLcnVcIntdEntry 1 }
ipivcLcnVcElapsedTimeTillNow OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
Vc started."
::= { ipivcLcnVcIntdEntry 2 }
ipivcLcnVcSegmentsRx OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments received at the time
command was issued. This is the segment received count
maintained by accounting at each end of the Vc. This counter is
updated only when the packet cannot be successfully delivered out
of the sink Vc and to the sink AP Conditions in which packets may
be discarded by the sink Vc include: missing packets due to subnet
discards, segmentation protocol violations due to subnet discard,
duplicated and out-of-ranged packets and packets that arrive while
Vc is in path recovery state."
::= { ipivcLcnVcIntdEntry 3 }
ipivcLcnVcSegmentsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments sent at the time
command was issued. This is the segment sent count maintained by
accounting at the source Vc. Vc only counts packets that Vc thinks
can be delivered successfully into the subnet. In reality, these
packets may be dropped by trunking, for instance. This counter is
not updated when splitting fails, when Vc is in a path recovery state,
when packet forwarding fails to forward this packet and when
subsequent packets have to be discarded as we want to minimize the
chance of out-of-sequence and do not intentionally send out-of-
sequenced packets into the subnet."
::= { ipivcLcnVcIntdEntry 4 }
ipivcLcnVcStartTime OBJECT-TYPE
SYNTAX EnterpriseDateAndTime (SIZE (0 | 19))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes."
::= { ipivcLcnVcIntdEntry 5 }
ipivcLcnVcStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpivcLcnVcStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
... Statistics(Stats)
This group defines general attributes collected by general Vc.
The purpose of Vc attributes is to aid end users and verification
people to understand the Vc internal behavior. This is particularly
useful when the network has experienced abnormality and we want
to isolate problems and pinpoint trouble spots.
Attributes are collected on a per Vc basis. Until a need is identified,
statistics are not collected at a processor level. Each attribute is
stored in a 32 bit field and is initialized to zero when a Vc enters
into the data transfer state. When a PVC is disconnected and then
connected again, the attributes will be reset. Attributes cannot be
reset through other methods."
::= { ipivcLcnVc 12 }
ipivcLcnVcStatsEntry OBJECT-TYPE
SYNTAX IpivcLcnVcStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ipivcLcnVcStatsTable."
INDEX {
ipivcIndex,
ipivcLcnIndex,
ipivcLcnVcIndex }
::= { ipivcLcnVcStatsTable 1 }
IpivcLcnVcStatsEntry ::= SEQUENCE {
ipivcLcnVcAckStackingTimeouts
Unsigned32,
ipivcLcnVcOutOfRangeFrmFromSubnet
Unsigned32,
ipivcLcnVcDuplicatesFromSubnet
Unsigned32,
ipivcLcnVcFrmRetryTimeouts
Unsigned32,
ipivcLcnVcPeakRetryQueueSize
Unsigned32,
ipivcLcnVcPeakOoSeqQueueSize
Unsigned32,
ipivcLcnVcPeakOoSeqFrmForwarded
Unsigned32,
ipivcLcnVcPeakStackedAcksRx
Unsigned32,
ipivcLcnVcSubnetRecoveries
Unsigned32,
ipivcLcnVcWindowClosuresToSubnet
Unsigned32,
ipivcLcnVcWindowClosuresFromSubnet
Unsigned32,
ipivcLcnVcWrTriggers
Unsigned32 }
ipivcLcnVcAckStackingTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of ack stacking timer expiries.
It is used as an indicator of the acknowledgment behavior across the
subnet when ack stacking is in effect. If it expires often, usually this
means end users will experience longer delay.
The ack stacking timer specifies how long the Vc will wait before
finally sending the subnet acknowledgment. if this attribute is set to
a value of 0, then the Vc will automatically return acknowledgment
packets without delay. If this attribute is set to a value other than
zero, then the Vc will wait for this amount of time in an attempt to
piggyback the acknowledgment packet on another credit or data
packet. If the Vc cannot piggyback the acknowledgment packet
within this time, then the packet is returned without piggybacking."
::= { ipivcLcnVcStatsEntry 1 }
ipivcLcnVcOutOfRangeFrmFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of subnet frames discarded due to
the sequence number being out of range.
Two Categories apply for the General Vc
1) lost Acks (previous Range)
2) unexpected Packets (next Range)
Vc internally maintains its own sequence number of packet order
and sequencing. Due to packet retransmission, Vc may receive
duplicate packets that have the same Vc internal sequence number.
Only 1 copy is accepted by the Vc and other copies of the same
packets are detected through this count. This attribute can be used to
record the frequency of packet retransmission due to Vc and other
part of the subnet."
::= { ipivcLcnVcStatsEntry 2 }
ipivcLcnVcDuplicatesFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of subnet packets discarded due to
duplication. It is used to detect software error fault or duplication
caused by retransmitting."
::= { ipivcLcnVcStatsEntry 3 }
ipivcLcnVcFrmRetryTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames which have
retransmission time-out.
If packets from Vc into the subnet are discarded by the subnet, the
source Vc will not receive any acknowledgment. The retransmission
timer then expires and packets will be retransmitted again. Note that
the Vc idle probe may be retransmitted and is included in this count.
This statistics does not show the distribution of how many times
packets are retransmitted (e.g. first retransmission results in
successful packet forwarding)."
::= { ipivcLcnVcStatsEntry 4 }
ipivcLcnVcPeakRetryQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of the retransmission queue.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. It records the largest body of
unacknowledged packets."
::= { ipivcLcnVcStatsEntry 5 }
ipivcLcnVcPeakOoSeqQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of the out of sequence queue.
This attribute is used as an indicator of the sequencing behavior
across the subnet. It records the largest body of out of sequence
packets."
::= { ipivcLcnVcStatsEntry 6 }
ipivcLcnVcPeakOoSeqFrmForwarded OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of the sequence packet queue.
This attribute is used as an indicator of the sequencing behavior
across the subnet. It records the largest body of out of sequence
packets, which by the receipt of an expected packet have been
transformed to expected packets. The number of times this peak is
reached is not recorded as it is traffic dependent."
::= { ipivcLcnVcStatsEntry 7 }
ipivcLcnVcPeakStackedAcksRx OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of wait acks.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. It records the largest collective
acknowledgment."
::= { ipivcLcnVcStatsEntry 8 }
ipivcLcnVcSubnetRecoveries OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of successful Vc recovery attempts.
This attribute is used as an indicator of how many times the Vc path
is broken but can be recovered. This attribute is useful to record the
number of network path failures."
::= { ipivcLcnVcStatsEntry 9 }
ipivcLcnVcWindowClosuresToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of window closures to subnet.
A packet may have been sent into the subnet but its
acknowledgment from the remote Vc has not yet been received.
This is a 8 bit sequence number.This number is useful in detecting
whether the Vc is sending any packet into the subnet."
::= { ipivcLcnVcStatsEntry 10 }
ipivcLcnVcWindowClosuresFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of window closures from subnet.
This attribute is useful in detecting whether the Vc is receiving any
packet from the subnet."
::= { ipivcLcnVcStatsEntry 11 }
ipivcLcnVcWrTriggers OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of times the Vc stays within the
W-R region. The W-R region is a value used to determined the
timing of credit transmission. Should the current window size be
beneath this value, the credits will be transmitted immediately.
Otherwise, they will be transmitted later with actual data. The
wrTriggers statistic is therefore used to analyze the flow control and
credit mechanism."
::= { ipivcLcnVcStatsEntry 12 }
ipiVcGroup OBJECT IDENTIFIER ::= { ipiVcMIB 1 }
ipiVcGroupBE OBJECT IDENTIFIER ::= { ipiVcGroup 5 }
ipiVcGroupBE01 OBJECT IDENTIFIER ::= { ipiVcGroupBE 2 }
ipiVcGroupBE01A OBJECT IDENTIFIER ::= { ipiVcGroupBE01 2 }
ipiVcCapabilities OBJECT IDENTIFIER ::= { ipiVcMIB 3 }
ipiVcCapabilitiesBE OBJECT IDENTIFIER ::= { ipiVcCapabilities 5 }
ipiVcCapabilitiesBE01 OBJECT IDENTIFIER ::= { ipiVcCapabilitiesBE 2 }
ipiVcCapabilitiesBE01A OBJECT IDENTIFIER ::= { ipiVcCapabilitiesBE01 2 }
END