Nortel-Magellan-Passport-ServerAccessRsaMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
components,
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
RowPointer,
DisplayString,
StorageType,
RowStatus,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
Hex,
NonReplicated,
EnterpriseDateAndTime,
Link,
AsciiStringIndex,
DigitString
FROM Nortel-Magellan-Passport-TextualConventionsMIB;
serverAccessRsaMIB OBJECT IDENTIFIER ::= { passportMIBs 116 }
rsa OBJECT IDENTIFIER ::= { components 108 }
rsaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rsa components."
::= { rsa 1 }
rsaRowStatusEntry OBJECT-TYPE
SYNTAX RsaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rsa component."
INDEX {
rsaIndex }
::= { rsaRowStatusTable 1 }
RsaRowStatusEntry ::= SEQUENCE {
rsaRowStatus
RowStatus,
rsaComponentName
DisplayString,
rsaStorageType
StorageType,
rsaIndex
AsciiStringIndex }
rsaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rsa components.
These components can be added and deleted."
::= { rsaRowStatusEntry 1 }
rsaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rsaRowStatusEntry 2 }
rsaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rsa tables."
::= { rsaRowStatusEntry 4 }
rsaIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..8))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rsa tables."
::= { rsaRowStatusEntry 10 }
rsaOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Options group defines provisionable attributes associated with
the Rsa component."
::= { rsa 10 }
rsaOptionsEntry OBJECT-TYPE
SYNTAX RsaOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaOptionsTable."
INDEX {
rsaIndex }
::= { rsaOptionsTable 1 }
RsaOptionsEntry ::= SEQUENCE {
rsaLogicalProcessor
Link }
rsaLogicalProcessor OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the logical processor on which the RSA
process will execute."
::= { rsaOptionsEntry 2 }
rsaStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { rsa 11 }
rsaStateEntry OBJECT-TYPE
SYNTAX RsaStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaStateTable."
INDEX {
rsaIndex }
::= { rsaStateTable 1 }
RsaStateEntry ::= SEQUENCE {
rsaAdminState
INTEGER,
rsaOperationalState
INTEGER,
rsaUsageState
INTEGER }
rsaAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { rsaStateEntry 1 }
rsaOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { rsaStateEntry 2 }
rsaUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { rsaStateEntry 3 }
rsaOperationalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaOperationalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Operational group defines operational attributes associated
with the Rsa component."
::= { rsa 12 }
rsaOperationalEntry OBJECT-TYPE
SYNTAX RsaOperationalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaOperationalTable."
INDEX {
rsaIndex }
::= { rsaOperationalTable 1 }
RsaOperationalEntry ::= SEQUENCE {
rsaMaxRsiConnections
INTEGER,
rsaRsiConnections
INTEGER }
rsaMaxRsiConnections OBJECT-TYPE
SYNTAX INTEGER (1000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of RSI connections
which can be supported by this Rsa."
::= { rsaOperationalEntry 2 }
rsaRsiConnections OBJECT-TYPE
SYNTAX INTEGER (0..1000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the number of active RSI connections
currently supported by the Rsa component."
::= { rsaOperationalEntry 3 }
rsaDna OBJECT IDENTIFIER ::= { rsa 2 }
rsaDnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rsaDna components."
::= { rsaDna 1 }
rsaDnaRowStatusEntry OBJECT-TYPE
SYNTAX RsaDnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rsaDna component."
INDEX {
rsaIndex,
rsaDnaIndex }
::= { rsaDnaRowStatusTable 1 }
RsaDnaRowStatusEntry ::= SEQUENCE {
rsaDnaRowStatus
RowStatus,
rsaDnaComponentName
DisplayString,
rsaDnaStorageType
StorageType,
rsaDnaIndex
NonReplicated }
rsaDnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rsaDna components.
These components cannot be added nor deleted."
::= { rsaDnaRowStatusEntry 1 }
rsaDnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rsaDnaRowStatusEntry 2 }
rsaDnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rsaDna tables."
::= { rsaDnaRowStatusEntry 4 }
rsaDnaIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rsaDna tables."
::= { rsaDnaRowStatusEntry 10 }
rsaDnaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaDnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Address group contains attributes common to all Dna's. Every
Dna used in the network is defined with this group of 2 attributes.
The string of address digits is complemented by the type of address
or Npi. These attributes are used to interpret the format of the
address digits."
::= { rsaDna 10 }
rsaDnaAddressEntry OBJECT-TYPE
SYNTAX RsaDnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaDnaAddressTable."
INDEX {
rsaIndex,
rsaDnaIndex }
::= { rsaDnaAddressTable 1 }
RsaDnaAddressEntry ::= SEQUENCE {
rsaDnaNumberingPlanIndicator
INTEGER,
rsaDnaDataNetworkAddress
DigitString }
rsaDnaNumberingPlanIndicator OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the Numbering Plan Indicator (NPI) of the
Dna that is entered. An address may belong to the X.121 or E.164
numbering plans. X.121 is used in packet switched data networks."
DEFVAL { x121 }
::= { rsaDnaAddressEntry 1 }
rsaDnaDataNetworkAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Dna attribute contains digits which form a unique identifier of
the customer interface. It can be compared (approximation only) to
a telephone number where each phone number identifies a unique
telephone set. Dna digits are selected and assigned by network
operators."
::= { rsaDnaAddressEntry 2 }
rsaDnaOutgoingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaDnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The OutgoingOptions group defines call options of a Dna for calls
which are made out of the interface represented by the Dna. These
options are not used for calls arriving to the interface represented by
the Dna."
::= { rsaDna 11 }
rsaDnaOutgoingOptionsEntry OBJECT-TYPE
SYNTAX RsaDnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaDnaOutgoingOptionsTable."
INDEX {
rsaIndex,
rsaDnaIndex }
::= { rsaDnaOutgoingOptionsTable 1 }
RsaDnaOutgoingOptionsEntry ::= SEQUENCE {
rsaDnaOutCalls
INTEGER }
rsaDnaOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that outgoing
calls (from the DTE to the network) can be made using this
particular Dna. If set to a value of disallowed, then outgoing calls
cannot be made using this Dna - such calls will be cleared by the
local DCE. This attribute corresponds to the ITU-T 'Outgoing Calls
Barred' feature for Dnas in that outgoing calls are barred if this
attribute is set to a value of disallowed. Either outCalls, or incCalls
(or both) must be set to a value of allowed for this Dna to be usable."
DEFVAL { disallowed }
::= { rsaDnaOutgoingOptionsEntry 1 }
rsaDnaIncomingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaDnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IncomingOptions defines the set of options for incoming calls.
These options are used for calls arriving to the interface represented
by the Dna. For calls originated from the interface,
IncomingOptions attributes are not used."
::= { rsaDna 12 }
rsaDnaIncomingOptionsEntry OBJECT-TYPE
SYNTAX RsaDnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaDnaIncomingOptionsTable."
INDEX {
rsaIndex,
rsaDnaIndex }
::= { rsaDnaIncomingOptionsTable 1 }
RsaDnaIncomingOptionsEntry ::= SEQUENCE {
rsaDnaIncCalls
INTEGER,
rsaDnaIncAccess
INTEGER }
rsaDnaIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) can be made to this Dna. If set
to a value of disallowed, then incoming calls cannot be made to this
Dna - such calls will be cleared by the local DCE. This attribute
corresponds to the ITU-T 'Incoming Calls Barred' feature for Dna's
in that incoming calls are barred if this attribute is set to a value of
disallowed.
Either outCalls, or incCalls (or both) must be set to a value of
allowed for this Dna to be usable."
DEFVAL { allowed }
::= { rsaDnaIncomingOptionsEntry 1 }
rsaDnaIncAccess OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is an extension of the Closed User Group (CUG)
facility, as follows:
This attribute, if set to a value of allowed indicates that incoming
calls (from the network to the DTE) from the open (non-CUG) part
of the network are permitted. It also permits incoming calls from
DTEs that have Outgoing Access capabilities. If set to a value of
disallowed, then such calls cannot be made to this Dna - such calls
will be cleared by the local DCE.
This attribute corresponds to the ITU-T 'Closed User Group with
Incoming Access' feature for Dnas in that incoming access is
granted if this attribute is set to a value of allowed."
DEFVAL { disallowed }
::= { rsaDnaIncomingOptionsEntry 9 }
rsaDnaCug OBJECT IDENTIFIER ::= { rsaDna 2 }
rsaDnaCugRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaDnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rsaDnaCug components."
::= { rsaDnaCug 1 }
rsaDnaCugRowStatusEntry OBJECT-TYPE
SYNTAX RsaDnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rsaDnaCug component."
INDEX {
rsaIndex,
rsaDnaIndex,
rsaDnaCugIndex }
::= { rsaDnaCugRowStatusTable 1 }
RsaDnaCugRowStatusEntry ::= SEQUENCE {
rsaDnaCugRowStatus
RowStatus,
rsaDnaCugComponentName
DisplayString,
rsaDnaCugStorageType
StorageType,
rsaDnaCugIndex
Integer32 }
rsaDnaCugRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rsaDnaCug components.
These components can be added and deleted."
::= { rsaDnaCugRowStatusEntry 1 }
rsaDnaCugComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rsaDnaCugRowStatusEntry 2 }
rsaDnaCugStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rsaDnaCug tables."
::= { rsaDnaCugRowStatusEntry 4 }
rsaDnaCugIndex OBJECT-TYPE
SYNTAX Integer32 (0..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rsaDnaCug tables."
::= { rsaDnaCugRowStatusEntry 10 }
rsaDnaCugCugOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaDnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Attributes in this group define ClosedUserGroup options associated
with this particular interlockCode. Dna's with the same Cug
(interlockCode) can make calls within this group. Various
combinations which permit or prevent calls in the same Cug group
are defined here."
::= { rsaDnaCug 10 }
rsaDnaCugCugOptionsEntry OBJECT-TYPE
SYNTAX RsaDnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaDnaCugCugOptionsTable."
INDEX {
rsaIndex,
rsaDnaIndex,
rsaDnaCugIndex }
::= { rsaDnaCugCugOptionsTable 1 }
RsaDnaCugCugOptionsEntry ::= SEQUENCE {
rsaDnaCugType
INTEGER,
rsaDnaCugDnic
DigitString,
rsaDnaCugInterlockCode
Unsigned32,
rsaDnaCugPreferential
INTEGER,
rsaDnaCugOutCalls
INTEGER,
rsaDnaCugIncCalls
INTEGER,
rsaDnaCugPrivileged
INTEGER }
rsaDnaCugType OBJECT-TYPE
SYNTAX INTEGER {
national(0),
international(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Cug type - the Cug is either a national
Cug, or an international Cug. International closed user groups are
usually established between DTEs for which there is an X.75
Gateway between; whereas national closed user groups are usually
established between DTEs for which there is no X.75 Gateway
between. (National Cugs cannot normally traverse an X.75
Gateway).
If this attribute is set to national, then the Cug is a national Cug, in
which case, the dnic should be left at its default value since it is not
part of a national Cug. If this attribute is set to international, then
the Cug is an international Cug, in which case, the dnic should be
set appropriately as part of the Cug interlockCode."
DEFVAL { national }
::= { rsaDnaCugCugOptionsEntry 1 }
rsaDnaCugDnic OBJECT-TYPE
SYNTAX DigitString (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the dnic (Data Network ID Code) of the Cug
by which packet networks are identified. This attribute is not
applicable if the Cug is a national Cug, as specified by the Cug type
attribute. There are usually 1 or 2 dnics assigned per country, for
public networks. The U.S. is an exception where each BOC has a
dnic. Also, a group of private networks can have its own dnic.
dnic value is not an arbitrary number. It is assigned by international
agreement and controlled by ITU-T."
DEFVAL { '30303030'H }
::= { rsaDnaCugCugOptionsEntry 2 }
rsaDnaCugInterlockCode OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Cug identifier of a national or
international Cug call. It is an arbitrary number and it also can be
called Cug in some descriptions. Interfaces (Dna's) defined with
this number can make calls to Dna's with the same interlockCode."
DEFVAL { 0 }
::= { rsaDnaCugCugOptionsEntry 3 }
rsaDnaCugPreferential OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to yes indicates that this Cug is the preferential
Cug, in which case it will be used during the call establishment
phase if the DTE has not explicitly specified a Cug index in the call
request packet. If set to no, then this Cug is not the preferential
Cug.
Only one of the Cugs associated with a particular Dna can be the
preferential Cug - only one Cug can have this attribute set to yes."
DEFVAL { no }
::= { rsaDnaCugCugOptionsEntry 4 }
rsaDnaCugOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to allowed indicates that outgoing calls (from
the DTE into the network) can be made using this particular Cug. If
set to a value of disallowed, then outgoing calls cannot be made
using this Cug - such calls will be cleared by the local DCE.
This attribute corresponds to the ITU-T 'Outgoing Calls Barred'
feature for Cugs in that outgoing calls are barred if this attribute is
set to a value of disallowed."
DEFVAL { disallowed }
::= { rsaDnaCugCugOptionsEntry 5 }
rsaDnaCugIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to allowed indicates that incoming calls (from
the network to the DTE) can be made using this particular Cug. If
set to disallowed, then incoming calls cannot be made using this
Cug - such calls will be cleared by the local DCE.
This attribute corresponds to the ITU-T 'Incoming Calls Barred'
feature for Cugs in that incoming calls are barred if this attribute is
set to a value of disallowed."
DEFVAL { allowed }
::= { rsaDnaCugCugOptionsEntry 6 }
rsaDnaCugPrivileged OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to yes indicates that this Cug is a privileged
Cug. In DPN, at least one side of a call setup within a Cug must
have the Cug as a privileged Cug. If set to no, then the Cug is not
privileged.
If both the local DTE and the remote DTE subscribe to the Cug, but
it is not privileged, then the call will be cleared. This attribute is
typically used for a host DTE which must accept calls from many
other DTEs in which case the other DTEs cannot call one another,
but can call the host. In this example, the host would have the
privileged Cug, and the other DTEs would belong to the same Cug,
but it would not be privileged."
DEFVAL { yes }
::= { rsaDnaCugCugOptionsEntry 7 }
rsaVncsAccess OBJECT IDENTIFIER ::= { rsa 3 }
rsaVncsAccessRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaVncsAccessRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
rsaVncsAccess components."
::= { rsaVncsAccess 1 }
rsaVncsAccessRowStatusEntry OBJECT-TYPE
SYNTAX RsaVncsAccessRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rsaVncsAccess component."
INDEX {
rsaIndex,
rsaVncsAccessIndex }
::= { rsaVncsAccessRowStatusTable 1 }
RsaVncsAccessRowStatusEntry ::= SEQUENCE {
rsaVncsAccessRowStatus
RowStatus,
rsaVncsAccessComponentName
DisplayString,
rsaVncsAccessStorageType
StorageType,
rsaVncsAccessIndex
NonReplicated }
rsaVncsAccessRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rsaVncsAccess components.
These components can be added and deleted."
::= { rsaVncsAccessRowStatusEntry 1 }
rsaVncsAccessComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rsaVncsAccessRowStatusEntry 2 }
rsaVncsAccessStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rsaVncsAccess tables."
::= { rsaVncsAccessRowStatusEntry 4 }
rsaVncsAccessIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rsaVncsAccess tables."
::= { rsaVncsAccessRowStatusEntry 10 }
rsaVncsAccessProvisionedTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaVncsAccessProvisionedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Provisioned group defines provisioned attributes associated
with the VncsAccess component."
::= { rsaVncsAccess 10 }
rsaVncsAccessProvisionedEntry OBJECT-TYPE
SYNTAX RsaVncsAccessProvisionedEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaVncsAccessProvisionedTable."
INDEX {
rsaIndex,
rsaVncsAccessIndex }
::= { rsaVncsAccessProvisionedTable 1 }
RsaVncsAccessProvisionedEntry ::= SEQUENCE {
rsaVncsAccessTimeToLive
INTEGER }
rsaVncsAccessTimeToLive OBJECT-TYPE
SYNTAX INTEGER (1..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the length of time VNCS requests are
allowed to remain queued for transmission before they are
considered too old and are discarded. This attribute should be set in
considereation with the voice application timeout interval."
DEFVAL { 2 }
::= { rsaVncsAccessProvisionedEntry 1 }
rsaVncsAccessStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaVncsAccessStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { rsaVncsAccess 11 }
rsaVncsAccessStateEntry OBJECT-TYPE
SYNTAX RsaVncsAccessStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaVncsAccessStateTable."
INDEX {
rsaIndex,
rsaVncsAccessIndex }
::= { rsaVncsAccessStateTable 1 }
RsaVncsAccessStateEntry ::= SEQUENCE {
rsaVncsAccessAdminState
INTEGER,
rsaVncsAccessOperationalState
INTEGER,
rsaVncsAccessUsageState
INTEGER }
rsaVncsAccessAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { rsaVncsAccessStateEntry 1 }
rsaVncsAccessOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { rsaVncsAccessStateEntry 2 }
rsaVncsAccessUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { rsaVncsAccessStateEntry 3 }
rsaVncsAccessOperationalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaVncsAccessOperationalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Operational group defines operational attributes associated
with the VncsAccess component."
::= { rsaVncsAccess 12 }
rsaVncsAccessOperationalEntry OBJECT-TYPE
SYNTAX RsaVncsAccessOperationalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaVncsAccessOperationalTable."
INDEX {
rsaIndex,
rsaVncsAccessIndex }
::= { rsaVncsAccessOperationalTable 1 }
RsaVncsAccessOperationalEntry ::= SEQUENCE {
rsaVncsAccessRequestsSent
Counter32,
rsaVncsAccessRepliesReceived
Counter32,
rsaVncsAccessRequestsQueued
INTEGER,
rsaVncsAccessRequestsDiscarded
Counter32 }
rsaVncsAccessRequestsSent OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of translation requests sent to
VNCS. This counter wraps to zero when it reaches its maximum
value."
::= { rsaVncsAccessOperationalEntry 1 }
rsaVncsAccessRepliesReceived OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of translation replies received from
VNCS. This counter wraps to zero when it reaches its maximum
value."
::= { rsaVncsAccessOperationalEntry 2 }
rsaVncsAccessRequestsQueued OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of translation requests queued
for transmission to VNCS."
DEFVAL { 0 }
::= { rsaVncsAccessOperationalEntry 3 }
rsaVncsAccessRequestsDiscarded OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of translation requests discarded
before being sent to VNCS. Requests are discarded if the queue
becomes too large or the VNCS server is unavailable. This counter
wraps to zero when it reaches its maximum value."
::= { rsaVncsAccessOperationalEntry 4 }
rsaConnection OBJECT IDENTIFIER ::= { rsa 4 }
rsaConnectionRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rsaConnection components."
::= { rsaConnection 1 }
rsaConnectionRowStatusEntry OBJECT-TYPE
SYNTAX RsaConnectionRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rsaConnection component."
INDEX {
rsaIndex,
rsaConnectionIndex }
::= { rsaConnectionRowStatusTable 1 }
RsaConnectionRowStatusEntry ::= SEQUENCE {
rsaConnectionRowStatus
RowStatus,
rsaConnectionComponentName
DisplayString,
rsaConnectionStorageType
StorageType,
rsaConnectionIndex
Integer32 }
rsaConnectionRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rsaConnection components.
These components cannot be added nor deleted."
::= { rsaConnectionRowStatusEntry 1 }
rsaConnectionComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rsaConnectionRowStatusEntry 2 }
rsaConnectionStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rsaConnection tables."
::= { rsaConnectionRowStatusEntry 4 }
rsaConnectionIndex OBJECT-TYPE
SYNTAX Integer32 (1..1000)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rsaConnection tables."
::= { rsaConnectionRowStatusEntry 10 }
rsaConnectionOperationalTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionOperationalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
The Operational group defines operational attributes associated
with the Connection component."
::= { rsaConnection 10 }
rsaConnectionOperationalEntry OBJECT-TYPE
SYNTAX RsaConnectionOperationalEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionOperationalTable."
INDEX {
rsaIndex,
rsaConnectionIndex }
::= { rsaConnectionOperationalTable 1 }
RsaConnectionOperationalEntry ::= SEQUENCE {
rsaConnectionRemoteName
AsciiString,
rsaConnectionCallState
INTEGER }
rsaConnectionRemoteName OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies an ASCII string identifier for the remote
module which is retrieved from the call request as user data."
::= { rsaConnectionOperationalEntry 1 }
rsaConnectionCallState OBJECT-TYPE
SYNTAX INTEGER {
initializing(0),
creatingVc(1),
calling(2),
acceptingCall(3),
registeringFmo(4),
establishingLapf(5),
dataTransfer(6),
clearingCall(7),
terminating(8),
terminatingVc(9),
terminated(10) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the connection. The normal state
for the connection is dataTransfer. The other states are transient
states used to setup or clear the connection."
::= { rsaConnectionOperationalEntry 2 }
rsaConnectionServerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionServerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
The ServerStatistics group provides individual server usage
statistics for the connection."
::= { rsaConnection 11 }
rsaConnectionServerStatsEntry OBJECT-TYPE
SYNTAX RsaConnectionServerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionServerStatsTable."
INDEX {
rsaIndex,
rsaConnectionIndex }
::= { rsaConnectionServerStatsTable 1 }
RsaConnectionServerStatsEntry ::= SEQUENCE {
rsaConnectionVncsRequests
Counter32,
rsaConnectionVncsReplies
Counter32 }
rsaConnectionVncsRequests OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of VNCS translation requests sent
or received on this connection."
::= { rsaConnectionServerStatsEntry 1 }
rsaConnectionVncsReplies OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of VNCS translation replies sent or
received on this connection."
::= { rsaConnectionServerStatsEntry 2 }
rsaConnectionLapfStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionLapfStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the LAPF status."
::= { rsaConnection 12 }
rsaConnectionLapfStatusEntry OBJECT-TYPE
SYNTAX RsaConnectionLapfStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionLapfStatusTable."
INDEX {
rsaIndex,
rsaConnectionIndex }
::= { rsaConnectionLapfStatusTable 1 }
RsaConnectionLapfStatusEntry ::= SEQUENCE {
rsaConnectionLapfState
INTEGER,
rsaConnectionLapfQueueSize
Counter32 }
rsaConnectionLapfState OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
linkSetup(2),
disconnectRequest(4),
informationTransfer(5),
waitingAck(7) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute shows the current state of the LAPF interface. The
normal states are informationTransfer and waitingAck. Since the
LAPF interface is not over a physical link the other states are
transitional."
::= { rsaConnectionLapfStatusEntry 1 }
rsaConnectionLapfQueueSize OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of frames in the LAPF transmit
queue."
::= { rsaConnectionLapfStatusEntry 4 }
rsaConnectionLapfStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionLapfStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the LAPF statistics."
::= { rsaConnection 13 }
rsaConnectionLapfStatsEntry OBJECT-TYPE
SYNTAX RsaConnectionLapfStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionLapfStatsTable."
INDEX {
rsaIndex,
rsaConnectionIndex }
::= { rsaConnectionLapfStatsTable 1 }
RsaConnectionLapfStatsEntry ::= SEQUENCE {
rsaConnectionLapfStateChanges
Counter32,
rsaConnectionLapfRemoteBusy
Counter32,
rsaConnectionLapfAckTimeouts
Counter32,
rsaConnectionLapfRejectFramesRx
Counter32,
rsaConnectionLapfIFramesTx
Counter32,
rsaConnectionLapfIFramesTxDiscarded
Counter32,
rsaConnectionLapfIFramesRx
Counter32,
rsaConnectionLapfIFramesRxDiscarded
Counter32 }
rsaConnectionLapfStateChanges OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the LAPF interface has
changed state. While the LAPF interface is in informationTransfer
state, this counter will increment on each expiry of idleProbeTimer
as its state goes from informationTransfer to waitingAck and back.
When this count reaches maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 1 }
rsaConnectionLapfRemoteBusy OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times transmission of an I-frame
was unsuccessful due to a perceived remote busy condition
(window closed or remote busy). When this count reaches
maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 2 }
rsaConnectionLapfAckTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the ackTimer has expired.
Frequent increments of this counter indicate improper values have
been chosen for ackTimer and ackDelayTimer between the local
and remote ends. When this count reaches maximum, it wraps to
zero."
::= { rsaConnectionLapfStatsEntry 3 }
rsaConnectionLapfRejectFramesRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of REJ frames received. When this
count reaches maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 4 }
rsaConnectionLapfIFramesTx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of I-frames transmitted. An I-
frame may be counted more than once if there are retransmissions.
When this count reaches maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 5 }
rsaConnectionLapfIFramesTxDiscarded OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of transmit I-frames that have been
discarded. Discard reasons may be one of the following:
1. The frame length is beyond allowed limit.
2. The LAPF interface is in disconnected state.
3. The transmit queue has been purged because the queue length
has reached the reset threshold.
When this count reaches maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 6 }
rsaConnectionLapfIFramesRx OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of I-frames received. When this
count reaches maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 7 }
rsaConnectionLapfIFramesRxDiscarded OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of received I-frames that have been
discarded. The discard reasons are:
1. Incorrect frame size.
2. Frame is out of sequence.
3. Frame received while not in informationTransfer or waitingAck
state.
When this count reaches maximum, it wraps to zero."
::= { rsaConnectionLapfStatsEntry 8 }
rsaConnectionVc OBJECT IDENTIFIER ::= { rsaConnection 2 }
rsaConnectionVcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionVcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
rsaConnectionVc components."
::= { rsaConnectionVc 1 }
rsaConnectionVcRowStatusEntry OBJECT-TYPE
SYNTAX RsaConnectionVcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
rsaConnectionVc component."
INDEX {
rsaIndex,
rsaConnectionIndex,
rsaConnectionVcIndex }
::= { rsaConnectionVcRowStatusTable 1 }
RsaConnectionVcRowStatusEntry ::= SEQUENCE {
rsaConnectionVcRowStatus
RowStatus,
rsaConnectionVcComponentName
DisplayString,
rsaConnectionVcStorageType
StorageType,
rsaConnectionVcIndex
NonReplicated }
rsaConnectionVcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
rsaConnectionVc components.
These components cannot be added nor deleted."
::= { rsaConnectionVcRowStatusEntry 1 }
rsaConnectionVcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { rsaConnectionVcRowStatusEntry 2 }
rsaConnectionVcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
rsaConnectionVc tables."
::= { rsaConnectionVcRowStatusEntry 4 }
rsaConnectionVcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the rsaConnectionVc tables."
::= { rsaConnectionVcRowStatusEntry 10 }
rsaConnectionVcCadTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionVcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group represents operational call data related to Frame Relay
Vc. It can be displayed only for Frame Relay Vc which is created by
application."
::= { rsaConnectionVc 10 }
rsaConnectionVcCadEntry OBJECT-TYPE
SYNTAX RsaConnectionVcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionVcCadTable."
INDEX {
rsaIndex,
rsaConnectionIndex,
rsaConnectionVcIndex }
::= { rsaConnectionVcCadTable 1 }
RsaConnectionVcCadEntry ::= SEQUENCE {
rsaConnectionVcType
INTEGER,
rsaConnectionVcState
INTEGER,
rsaConnectionVcPreviousState
INTEGER,
rsaConnectionVcDiagnosticCode
Unsigned32,
rsaConnectionVcPreviousDiagnosticCode
Unsigned32,
rsaConnectionVcCalledNpi
INTEGER,
rsaConnectionVcCalledDna
DigitString,
rsaConnectionVcCalledLcn
Unsigned32,
rsaConnectionVcCallingNpi
INTEGER,
rsaConnectionVcCallingDna
DigitString,
rsaConnectionVcCallingLcn
Unsigned32,
rsaConnectionVcAccountingEnabled
INTEGER,
rsaConnectionVcFastSelectCall
INTEGER,
rsaConnectionVcPathReliability
INTEGER,
rsaConnectionVcAccountingEnd
INTEGER,
rsaConnectionVcPriority
INTEGER,
rsaConnectionVcSegmentSize
Unsigned32,
rsaConnectionVcMaxSubnetPktSize
Unsigned32,
rsaConnectionVcRcosToNetwork
INTEGER,
rsaConnectionVcRcosFromNetwork
INTEGER,
rsaConnectionVcEmissionPriorityToNetwork
INTEGER,
rsaConnectionVcEmissionPriorityFromNetwork
INTEGER,
rsaConnectionVcDataPath
AsciiString }
rsaConnectionVcType OBJECT-TYPE
SYNTAX INTEGER {
svc(0),
pvc(1),
spvc(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the type of call, pvc,svc or spvc."
::= { rsaConnectionVcCadEntry 1 }
rsaConnectionVcState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the state of call control. P5 state is not
supported but is listed for completness. Transitions from one state to
another take very short time. state most often displayed is
dataTransferP4."
::= { rsaConnectionVcCadEntry 2 }
rsaConnectionVcPreviousState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the previous state of call control. This is a
valuable field to determine how the processing is progressing."
::= { rsaConnectionVcCadEntry 3 }
rsaConnectionVcDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { rsaConnectionVcCadEntry 4 }
rsaConnectionVcPreviousDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { rsaConnectionVcCadEntry 5 }
rsaConnectionVcCalledNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
called end."
::= { rsaConnectionVcCadEntry 6 }
rsaConnectionVcCalledDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
called (destination) DTE to which this call is sent. This address if
defined at recieving end will complete Vc connection."
::= { rsaConnectionVcCadEntry 7 }
rsaConnectionVcCalledLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the called
end. It is valid only after both ends of Vc exchanged relevant
information."
::= { rsaConnectionVcCadEntry 8 }
rsaConnectionVcCallingNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
calling end."
::= { rsaConnectionVcCadEntry 9 }
rsaConnectionVcCallingDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
calling end."
::= { rsaConnectionVcCadEntry 10 }
rsaConnectionVcCallingLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the calling
end."
::= { rsaConnectionVcCadEntry 11 }
rsaConnectionVcAccountingEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes(0),
no(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates that this optional section of accounting
record is suppressed or permitted. If accountingEnabled is yes,
conditions for generation of accounting record were met. These
conditions include billing options, vc recovery conditions and
Module wide accounting data options."
::= { rsaConnectionVcCadEntry 12 }
rsaConnectionVcFastSelectCall OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays that this is a fast select call."
::= { rsaConnectionVcCadEntry 13 }
rsaConnectionVcPathReliability OBJECT-TYPE
SYNTAX INTEGER {
high(0),
normal(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the path reliability."
::= { rsaConnectionVcCadEntry 19 }
rsaConnectionVcAccountingEnd OBJECT-TYPE
SYNTAX INTEGER {
callingEnd(0),
calledEnd(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if this end should generate an accounting
record. Normally, callingEnd is the end to generate an accounting
record."
::= { rsaConnectionVcCadEntry 20 }
rsaConnectionVcPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays whether the call is a normal or a high
priority call."
::= { rsaConnectionVcCadEntry 21 }
rsaConnectionVcSegmentSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the segment size (in bytes) used on the call.
It is used to calculate the number of segments transmitted and
received."
::= { rsaConnectionVcCadEntry 22 }
rsaConnectionVcMaxSubnetPktSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum packet size allowed on the Vc."
::= { rsaConnectionVcCadEntry 27 }
rsaConnectionVcRcosToNetwork OBJECT-TYPE
SYNTAX INTEGER {
throughput(0),
delay(1),
multimedia(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the routing metric routing class of service to
the network."
::= { rsaConnectionVcCadEntry 28 }
rsaConnectionVcRcosFromNetwork OBJECT-TYPE
SYNTAX INTEGER {
throughput(0),
delay(1),
multimedia(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the routing metric Routing Class of Service
from the Network."
::= { rsaConnectionVcCadEntry 29 }
rsaConnectionVcEmissionPriorityToNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1),
interrupting(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the network internal emission priotity to the
network."
::= { rsaConnectionVcCadEntry 30 }
rsaConnectionVcEmissionPriorityFromNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1),
interrupting(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the network internal emission priotity from
the network."
::= { rsaConnectionVcCadEntry 31 }
rsaConnectionVcDataPath OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..32))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the data path used by the connection. The
data path is provisioned in Dna and DirectCall components. The
displayed value of this attribute can be different from the
provisioned value.
If the connection is using dprsOnly data path, the string
dprsOnly is displayed. (dynamic packet routing system)
If the connection is using dprsMcsOnly data path, the string
dprsMcsOnly is displayed.
If the connection is using dprsMcsFirst data path, the string
dprsMcsFirst is displayed."
::= { rsaConnectionVcCadEntry 32 }
rsaConnectionVcIntdTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionVcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group defines display of interval data collected by Vc. Data in
this group is variable and may depend on time when this display
command is issued."
::= { rsaConnectionVc 11 }
rsaConnectionVcIntdEntry OBJECT-TYPE
SYNTAX RsaConnectionVcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionVcIntdTable."
INDEX {
rsaIndex,
rsaConnectionIndex,
rsaConnectionVcIndex }
::= { rsaConnectionVcIntdTable 1 }
RsaConnectionVcIntdEntry ::= SEQUENCE {
rsaConnectionVcCallReferenceNumber
Hex,
rsaConnectionVcElapsedTimeTillNow
Unsigned32,
rsaConnectionVcSegmentsRx
Unsigned32,
rsaConnectionVcSegmentsSent
Unsigned32,
rsaConnectionVcStartTime
EnterpriseDateAndTime }
rsaConnectionVcCallReferenceNumber OBJECT-TYPE
SYNTAX Hex (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call."
::= { rsaConnectionVcIntdEntry 1 }
rsaConnectionVcElapsedTimeTillNow OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
Vc started."
::= { rsaConnectionVcIntdEntry 2 }
rsaConnectionVcSegmentsRx OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments received at the time
command was issued. This is the segment received count
maintained by accounting at each end of the Vc. This counter is
updated only when the packet cannot be successfully delivered out
of the sink Vc and to the sink AP Conditions in which packets may
be discarded by the sink Vc include: missing packets due to subnet
discards, segmentation protocol violations due to subnet discard,
duplicated and out-of-ranged packets and packets that arrive while
Vc is in path recovery state."
::= { rsaConnectionVcIntdEntry 3 }
rsaConnectionVcSegmentsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments sent at the time
command was issued. This is the segment sent count maintained by
accounting at the source Vc. Vc only counts packets that Vc thinks
can be delivered successfully into the subnet. In reality, these
packets may be dropped by trunking, for instance. This counter is
not updated when splitting fails, when Vc is in a path recovery state,
when packet forwarding fails to forward this packet and when
subsequent packets have to be discarded as we want to minimize the
chance of out-of-sequence and do not intentionally send out-of-
sequenced packets into the subnet."
::= { rsaConnectionVcIntdEntry 4 }
rsaConnectionVcStartTime OBJECT-TYPE
SYNTAX EnterpriseDateAndTime (SIZE (0 | 19))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes."
::= { rsaConnectionVcIntdEntry 5 }
rsaConnectionVcFrdTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionVcFrdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group defines Frame Relay attributes collected by Frame Relay
Vc.
The purpose of Vc attributes is to aid end users and verification
people to understand the Vc internal behavior. This is particularly
useful when the network has experienced abnormality and we want
to isolate problems and pinpoint trouble spots.
Attributes are collected on a per Vc basis. Until a need is identified,
statistics are not collected at a processor level. Each attribute is
stored in a 32 bit field and is initialized to zero when a Vc enters
into the data transfer state. When a PVC is disconnected and then
connected again, the attributes will be reset. Attributes cannot be
reset through other methods.
Frame Relay Vc uses a best effort data packet delivery protocol and
a different packet segmentation and combination methods from the
General Vc. The Frame Relay Vc uses the same call setup and
control mechanism (e.g. the support of non-flow control data
packets) as in a General Vc. Most General Vc statistics and internal
variables are used in a Frame Relay Vc and are displayed by
software developers"
::= { rsaConnectionVc 12 }
rsaConnectionVcFrdEntry OBJECT-TYPE
SYNTAX RsaConnectionVcFrdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionVcFrdTable."
INDEX {
rsaIndex,
rsaConnectionIndex,
rsaConnectionVcIndex }
::= { rsaConnectionVcFrdTable 1 }
RsaConnectionVcFrdEntry ::= SEQUENCE {
rsaConnectionVcFrmCongestedToSubnet
Unsigned32,
rsaConnectionVcCannotForwardToSubnet
Unsigned32,
rsaConnectionVcNotDataXferToSubnet
Unsigned32,
rsaConnectionVcOutOfRangeFrmFromSubnet
Unsigned32,
rsaConnectionVcCombErrorsFromSubnet
Unsigned32,
rsaConnectionVcDuplicatesFromSubnet
Unsigned32,
rsaConnectionVcNotDataXferFromSubnet
Unsigned32,
rsaConnectionVcFrmLossTimeouts
Unsigned32,
rsaConnectionVcOoSeqByteCntExceeded
Unsigned32,
rsaConnectionVcPeakOoSeqPktCount
Unsigned32,
rsaConnectionVcPeakOoSeqFrmForwarded
Unsigned32,
rsaConnectionVcSendSequenceNumber
Unsigned32,
rsaConnectionVcPktRetryTimeouts
Unsigned32,
rsaConnectionVcPeakRetryQueueSize
Unsigned32,
rsaConnectionVcSubnetRecoveries
Unsigned32,
rsaConnectionVcOoSeqPktCntExceeded
Unsigned32,
rsaConnectionVcPeakOoSeqByteCount
Unsigned32 }
rsaConnectionVcFrmCongestedToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of frames from link discarded
due to lack of resources. It keeps track of the number of frames
from link that have to be discarded. The discard reasons include
insufficient memory for splitting the frame into smaller subnet
packet size."
::= { rsaConnectionVcFrdEntry 2 }
rsaConnectionVcCannotForwardToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of discarded packets that can not
be forwarded into the subnet because of subnet congestion.
Number of frames from link discarded due to failure in forwarding
a packet from Vc into the subnet.- This attribute is increased when
packet forwarding fails to forward a packet into the subnet. If a
frame is split into multiple subnet packets and a partial packet has
to be discarded, all subsequent partial packets that have not yet been
delivered to the subnet will be discarded as well."
::= { rsaConnectionVcFrdEntry 3 }
rsaConnectionVcNotDataXferToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute records the number of frames from link discarded
when the Vc tries to recover from internal path failure."
::= { rsaConnectionVcFrdEntry 4 }
rsaConnectionVcOutOfRangeFrmFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of frames from subnet discarded
due to out of sequence range for arriving too late."
::= { rsaConnectionVcFrdEntry 5 }
rsaConnectionVcCombErrorsFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute records the number of subnet packets discarded at the
sink Vc due to the Vc segmentation and combination protocol error.
Usually, this occurs when the subnet discards packets and thus this
statistics can be used to guest the number of subnet packets that are
not delivered to the Vc. It cannot be used as an actual measure
because some subnet packets may have been delivered to Vc but
have to be discarded because these are partial packets to a frame in
which some other partial packets have not been properly delivered
to Vc"
::= { rsaConnectionVcFrdEntry 6 }
rsaConnectionVcDuplicatesFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of subnet packets discarded due
to duplication. Although packets are not retransmitted by the Frame
Relay Vc, it is possible for the subnet to retransmit packets. When
packets are out-of-sequenced and copies of the same packets arrive,
then this attribute is increased."
::= { rsaConnectionVcFrdEntry 7 }
rsaConnectionVcNotDataXferFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of subnet packets discarded when
data transfer is suspended in Vc recovery."
::= { rsaConnectionVcFrdEntry 8 }
rsaConnectionVcFrmLossTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of lost frame timer expiries.
When this count is excessive, the network is very congested and
packets have been discarded in the subnet."
::= { rsaConnectionVcFrdEntry 9 }
rsaConnectionVcOoSeqByteCntExceeded OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number times that the out of sequence
byte threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count."
::= { rsaConnectionVcFrdEntry 10 }
rsaConnectionVcPeakOoSeqPktCount OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the frame relay peak packet count of the out
of sequence queue. This attribute records the maximum queue
length of the out-of-sequenced queue. The counter can be used to
deduce the message buffer requirement on a Vc."
::= { rsaConnectionVcFrdEntry 11 }
rsaConnectionVcPeakOoSeqFrmForwarded OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the frame relay peak size of the
sequence packet queue. The subnet may deliver packets out-of-
sequenced. These packets are then queued in an out-of-sequenced
queue, waiting for a packet with the expected sequence number to
come. When that packet arrives, this attribute records the maximum
number of packets that were out-of-sequenced, but now have
become in-sequenced. The statistics is used to measure expected
queue size due to normal subnet packet disorder (not due to subnet
packet discard). Current implementation also uses this statistics to
set a maximum size for the out-of-sequenced queue."
::= { rsaConnectionVcFrdEntry 12 }
rsaConnectionVcSendSequenceNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Vc internal packet's send sequence
number. Note that a 'packet' in this context, may be either a user
data packet, or an OAM frame."
::= { rsaConnectionVcFrdEntry 13 }
rsaConnectionVcPktRetryTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of packets which have
retransmission time-outs. When this count is excessive, the network
is very congested and packets have been discarded in the subnet."
::= { rsaConnectionVcFrdEntry 15 }
rsaConnectionVcPeakRetryQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the peak size of retransmission queue.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. Records the largest body of
unacknowledged packets."
::= { rsaConnectionVcFrdEntry 16 }
rsaConnectionVcSubnetRecoveries OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of successful Vc recovery
attempts."
::= { rsaConnectionVcFrdEntry 17 }
rsaConnectionVcOoSeqPktCntExceeded OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number times that the out of sequence
packet threshold is exceeded. When the threshold is exceeded, this
condition is treated as if the loss frame timer has expired and all
frames queued at the sink Vc are delivered to the AP. We need to
keep this count to examine if the threshold is engineered properly.
This should be used in conjunction with the peak value of out-of-
sequenced queue and the number of times the loss frame timer has
expired. This count should be relatively small when compared with
loss frame timer expiry count."
::= { rsaConnectionVcFrdEntry 19 }
rsaConnectionVcPeakOoSeqByteCount OBJECT-TYPE
SYNTAX Unsigned32 (0..50000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the frame relay peak byte count of the out of
sequence queue. This attribute records the maximum queue length
of the out-of-sequenced queue. The counter can be used to deduce
the message buffer requirement on a Vc."
::= { rsaConnectionVcFrdEntry 20 }
rsaConnectionVcDmepTable OBJECT-TYPE
SYNTAX SEQUENCE OF RsaConnectionVcDmepEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This attribute displays the data path used by the connection. Data
path is provisioned in Dna and DirectCall components.
If the connection is using dprsOnly data path, this attribute is
empty.
If the connection is using dprsMcsOnly or dprsMcsFirst data path,
this attribute displays component name of the dprsMcsEndPoint."
::= { rsaConnectionVc 417 }
rsaConnectionVcDmepEntry OBJECT-TYPE
SYNTAX RsaConnectionVcDmepEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the rsaConnectionVcDmepTable."
INDEX {
rsaIndex,
rsaConnectionIndex,
rsaConnectionVcIndex,
rsaConnectionVcDmepValue }
::= { rsaConnectionVcDmepTable 1 }
RsaConnectionVcDmepEntry ::= SEQUENCE {
rsaConnectionVcDmepValue
RowPointer }
rsaConnectionVcDmepValue OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
rsaConnectionVcDmepTable."
::= { rsaConnectionVcDmepEntry 1 }
serverAccessRsaGroup OBJECT IDENTIFIER ::= { serverAccessRsaMIB 1 }
serverAccessRsaGroupBE OBJECT IDENTIFIER ::= { serverAccessRsaGroup 5 }
serverAccessRsaGroupBE01 OBJECT IDENTIFIER ::= { serverAccessRsaGroupBE 2 }
serverAccessRsaGroupBE01A OBJECT IDENTIFIER ::= { serverAccessRsaGroupBE01 2 }
serverAccessRsaCapabilities OBJECT IDENTIFIER ::= { serverAccessRsaMIB 3 }
serverAccessRsaCapabilitiesBE OBJECT IDENTIFIER ::= { serverAccessRsaCapabilities 5 }
serverAccessRsaCapabilitiesBE01 OBJECT IDENTIFIER ::= { serverAccessRsaCapabilitiesBE 2 }
serverAccessRsaCapabilitiesBE01A OBJECT IDENTIFIER ::= { serverAccessRsaCapabilitiesBE01 2 }
END