Nortel-Magellan-Passport-VirtualRouterMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
components,
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
RowPointer,
DisplayString,
StorageType,
RowStatus,
InterfaceIndex,
Gauge32,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
NonReplicated,
HexString,
Link,
AsciiStringIndex,
IntegerSequence
FROM Nortel-Magellan-Passport-TextualConventionsMIB;
virtualRouterMIB OBJECT IDENTIFIER ::= { passportMIBs 26 }
vr OBJECT IDENTIFIER ::= { components 100 }
vrRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vr components."
::= { vr 1 }
vrRowStatusEntry OBJECT-TYPE
SYNTAX VrRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vr component."
INDEX {
vrIndex }
::= { vrRowStatusTable 1 }
VrRowStatusEntry ::= SEQUENCE {
vrRowStatus
RowStatus,
vrComponentName
DisplayString,
vrStorageType
StorageType,
vrIndex
AsciiStringIndex }
vrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vr components.
These components can be added and deleted."
::= { vrRowStatusEntry 1 }
vrComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrRowStatusEntry 2 }
vrStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vr tables."
::= { vrRowStatusEntry 4 }
vrIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..8))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vr tables."
::= { vrRowStatusEntry 10 }
vrAdminContorlTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrAdminContorlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes the Administrative Control attribute. This
attribute defines the current administrative state of this component."
::= { vr 100 }
vrAdminContorlEntry OBJECT-TYPE
SYNTAX VrAdminContorlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrAdminContorlTable."
INDEX {
vrIndex }
::= { vrAdminContorlTable 1 }
VrAdminContorlEntry ::= SEQUENCE {
vrSnmpAdminStatus
INTEGER,
vrManagementAccess
INTEGER,
vrVirtualPrivateIntranetIdentifier
INTEGER }
vrSnmpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This sets the desired state of this VirtualRouter. The up state
indicates the Vr is operational. The down state indicates the Vr is
not operational.
The down state is only valid when the managementAccess attribute
is disabled. Testing is an invalid state for the Vr."
DEFVAL { up }
::= { vrAdminContorlEntry 1 }
vrManagementAccess OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attributes defines the routing capabilities of this Virtual Router
and controls the tcp access into that Vr.
External access is only permitted through the Vr that has this
attribute enabled.
The attribute allows the following subcomponents to be
provisioned: Ipx, Bridging, Sna, Sres, NetSentry, and Snmp.
Exactly one Vr must have this attribute enabled.
The first provisioned Vr will have the attribute enabled by default.
Subsequent Vrs will have the attribute disabled."
::= { vrAdminContorlEntry 2 }
vrVirtualPrivateIntranetIdentifier OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the Virtual Private Intranet (VPI) associated with this
Virtual Router. The vpiId must be unique for each VR on a
Passport and ach interconnected VR must have the same vpiId."
::= { vrAdminContorlEntry 3 }
vrCidDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrCidDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs."
::= { vr 101 }
vrCidDataEntry OBJECT-TYPE
SYNTAX VrCidDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrCidDataTable."
INDEX {
vrIndex }
::= { vrCidDataTable 1 }
VrCidDataEntry ::= SEQUENCE {
vrCustomerIdentifier
Unsigned32 }
vrCustomerIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..8191)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers."
DEFVAL { 0 }
::= { vrCidDataEntry 1 }
vrOperStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes the Operational Status attribute. This attribute
defines the current operational state of this component."
::= { vr 103 }
vrOperStatusEntry OBJECT-TYPE
SYNTAX VrOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrOperStatusTable."
INDEX {
vrIndex }
::= { vrOperStatusTable 1 }
VrOperStatusEntry ::= SEQUENCE {
vrSnmpOperStatus
INTEGER }
vrSnmpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed."
DEFVAL { up }
::= { vrOperStatusEntry 1 }
vrStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { vr 104 }
vrStateEntry OBJECT-TYPE
SYNTAX VrStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrStateTable."
INDEX {
vrIndex }
::= { vrStateTable 1 }
VrStateEntry ::= SEQUENCE {
vrAdminState
INTEGER,
vrOperationalState
INTEGER,
vrUsageState
INTEGER }
vrAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { vrStateEntry 1 }
vrOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { vrStateEntry 2 }
vrUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { vrStateEntry 3 }
vrIfNumberOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrIfNumberOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the ifNumber attribute."
::= { vr 105 }
vrIfNumberOperEntry OBJECT-TYPE
SYNTAX VrIfNumberOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrIfNumberOperTable."
INDEX {
vrIndex }
::= { vrIfNumberOperTable 1 }
VrIfNumberOperEntry ::= SEQUENCE {
vrIfNumber
Unsigned32 }
vrIfNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute defines the number of IfEntries in the IfTable."
::= { vrIfNumberOperEntry 1 }
vrMm OBJECT IDENTIFIER ::= { vr 2 }
vrMmRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrMmRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrMm components."
::= { vrMm 1 }
vrMmRowStatusEntry OBJECT-TYPE
SYNTAX VrMmRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrMm component."
INDEX {
vrIndex,
vrMmIndex }
::= { vrMmRowStatusTable 1 }
VrMmRowStatusEntry ::= SEQUENCE {
vrMmRowStatus
RowStatus,
vrMmComponentName
DisplayString,
vrMmStorageType
StorageType,
vrMmIndex
NonReplicated }
vrMmRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrMm components.
These components cannot be added nor deleted."
::= { vrMmRowStatusEntry 1 }
vrMmComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrMmRowStatusEntry 2 }
vrMmStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrMm tables."
::= { vrMmRowStatusEntry 4 }
vrMmIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrMm tables."
::= { vrMmRowStatusEntry 10 }
vrMmProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrMmProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group includes all provisioned attributes for the
MemoryManagement component."
::= { vrMm 10 }
vrMmProvEntry OBJECT-TYPE
SYNTAX VrMmProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrMmProvTable."
INDEX {
vrIndex,
vrMmIndex }
::= { vrMmProvTable 1 }
VrMmProvEntry ::= SEQUENCE {
vrMmVrMaxHeapSpace
Unsigned32,
vrMmIpMaxHeapSpace
Unsigned32,
vrMmIpxMaxHeapSpace
Unsigned32,
vrMmBridgingMaxHeapSpace
Unsigned32,
vrMmNetSentryMaxHeapSpace
Unsigned32,
vrMmSresMaxHeapSpace
Unsigned32,
vrMmSnaMaxHeapSpace
Unsigned32 }
vrMmVrMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of the total system heap space that is
allowed for use by this Virtual Router. Memory allocation for this
VR which attempts to exceed this limit will fail causing a shut down
of the requesting process."
DEFVAL { 100 }
::= { vrMmProvEntry 1 }
vrMmIpMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of this VR's dynamic memory which can be
allocated to this VR's IP. An attempt to allocate memory in excess of
this limit forces IP to shut down."
DEFVAL { 100 }
::= { vrMmProvEntry 2 }
vrMmIpxMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of this VR's dynamic memory which can be
allocated to this VR's IPX. An attempt to allocate memory in excess of
this limit forces IPX to shut down."
DEFVAL { 100 }
::= { vrMmProvEntry 3 }
vrMmBridgingMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of this VR's dynamic memory which can be
allocated to this VR's Bridging. An attempt to allocate memory in
excess of this limit forces Bridging to shut down."
DEFVAL { 100 }
::= { vrMmProvEntry 6 }
vrMmNetSentryMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of this VR's dynamic memory which can be
allocated to this VR's NetSentry. An attempt to allocate memory in
excess of this limit forces NetSentry to shut down."
DEFVAL { 100 }
::= { vrMmProvEntry 7 }
vrMmSresMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of this VR's dynamic memory which can
be allocated to this VR's SourceRouteEndStation. An attempt to
allocate memory in excess of this limit forces
SourceRouteEndStation to shut down."
DEFVAL { 100 }
::= { vrMmProvEntry 8 }
vrMmSnaMaxHeapSpace OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum percentage of this VR's dynamic memory which can
be allocated to this VR's SNA. An attempt to allocate memory in
excess of this limit forces SNA to shut down."
DEFVAL { 100 }
::= { vrMmProvEntry 9 }
vrMmOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrMmOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The group includes all operational attributes for the
MemoryManagement component."
::= { vrMm 11 }
vrMmOperEntry OBJECT-TYPE
SYNTAX VrMmOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrMmOperTable."
INDEX {
vrIndex,
vrMmIndex }
::= { vrMmOperTable 1 }
VrMmOperEntry ::= SEQUENCE {
vrMmVrHeapSpaceBytesAllocated
Unsigned32,
vrMmVrHeapSpaceAllocated
Unsigned32,
vrMmIpHeapSpaceAllocated
Unsigned32,
vrMmIpxHeapSpaceAllocated
Unsigned32,
vrMmBridgingHeapSpaceAllocated
Unsigned32,
vrMmNetSentryHeapSpaceAllocated
Unsigned32,
vrMmSresHeapSpaceAllocated
Unsigned32,
vrMmSnaHeapSpaceAllocated
Unsigned32 }
vrMmVrHeapSpaceBytesAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes of system dynamic memory which has been
allocated by this Virtual Router."
::= { vrMmOperEntry 1 }
vrMmVrHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of system dynamic memory which is currently allocated
to this Virtual Router."
::= { vrMmOperEntry 2 }
vrMmIpHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's IP."
::= { vrMmOperEntry 3 }
vrMmIpxHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's IPX."
DEFVAL { 100 }
::= { vrMmOperEntry 4 }
vrMmBridgingHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's Bridging."
::= { vrMmOperEntry 7 }
vrMmNetSentryHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's NetSentry."
::= { vrMmOperEntry 8 }
vrMmSresHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's Source Route End Station."
::= { vrMmOperEntry 9 }
vrMmSnaHeapSpaceAllocated OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The percentage of this Virtual Router's dynamic memory which is
currently allocated to this Virtual Router's SNA."
::= { vrMmOperEntry 10 }
vrPp OBJECT IDENTIFIER ::= { vr 3 }
vrPpRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrPp components."
::= { vrPp 1 }
vrPpRowStatusEntry OBJECT-TYPE
SYNTAX VrPpRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrPp component."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpRowStatusTable 1 }
VrPpRowStatusEntry ::= SEQUENCE {
vrPpRowStatus
RowStatus,
vrPpComponentName
DisplayString,
vrPpStorageType
StorageType,
vrPpIndex
AsciiStringIndex }
vrPpRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrPp components.
These components can be added and deleted."
::= { vrPpRowStatusEntry 1 }
vrPpComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrPpRowStatusEntry 2 }
vrPpStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrPp tables."
::= { vrPpRowStatusEntry 4 }
vrPpIndex OBJECT-TYPE
SYNTAX AsciiStringIndex (SIZE (1..20))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrPp tables."
::= { vrPpRowStatusEntry 10 }
vrPpAdminControlTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpAdminControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes the Administrative Control attribute. This
attribute defines the current administrative state of this component."
::= { vrPp 100 }
vrPpAdminControlEntry OBJECT-TYPE
SYNTAX VrPpAdminControlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrPpAdminControlTable."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpAdminControlTable 1 }
VrPpAdminControlEntry ::= SEQUENCE {
vrPpSnmpAdminStatus
INTEGER }
vrPpSnmpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of the interface. The up state indicates the
interface is operational and packet forwarding is allowed. The down
state indicates the interface is not operational and packet forwarding
is unavailable. The testing state indicates that no operational
packets can be passed."
DEFVAL { up }
::= { vrPpAdminControlEntry 1 }
vrPpProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes provisioned attributes specific to the ProtocolPort
component."
::= { vrPp 101 }
vrPpProvEntry OBJECT-TYPE
SYNTAX VrPpProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrPpProvTable."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpProvTable 1 }
VrPpProvEntry ::= SEQUENCE {
vrPpLinkToMedia
Link }
vrPpLinkToMedia OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines the Media Application which this Protocol Port is
using as an interface to the network."
::= { vrPpProvEntry 1 }
vrPpOperStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes the Operational Status attribute. This attribute
defines the current operational state of this component."
::= { vrPp 102 }
vrPpOperStatusEntry OBJECT-TYPE
SYNTAX VrPpOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrPpOperStatusTable."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpOperStatusTable 1 }
VrPpOperStatusEntry ::= SEQUENCE {
vrPpSnmpOperStatus
INTEGER }
vrPpSnmpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed."
DEFVAL { up }
::= { vrPpOperStatusEntry 1 }
vrPpStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { vrPp 103 }
vrPpStateEntry OBJECT-TYPE
SYNTAX VrPpStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrPpStateTable."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpStateTable 1 }
VrPpStateEntry ::= SEQUENCE {
vrPpAdminState
INTEGER,
vrPpOperationalState
INTEGER,
vrPpUsageState
INTEGER }
vrPpAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { vrPpStateEntry 1 }
vrPpOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { vrPpStateEntry 2 }
vrPpUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { vrPpStateEntry 3 }
vrPpOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes operational attributes specific to the ProtocolPort
component."
::= { vrPp 104 }
vrPpOperEntry OBJECT-TYPE
SYNTAX VrPpOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrPpOperTable."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpOperTable 1 }
VrPpOperEntry ::= SEQUENCE {
vrPpIfIndex
InterfaceIndex }
vrPpIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This represents the SNMP ifIndex which is associated with this PP. This
ifIndex can be used to extract detailed information about the PP from
the ifTable."
::= { vrPpOperEntry 1 }
vrPpNbmaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrPpNbmaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational attributes of the ProtocolPort
component specific to NHRP."
::= { vrPp 105 }
vrPpNbmaAddressEntry OBJECT-TYPE
SYNTAX VrPpNbmaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrPpNbmaAddressTable."
INDEX {
vrIndex,
vrPpIndex }
::= { vrPpNbmaAddressTable 1 }
VrPpNbmaAddressEntry ::= SEQUENCE {
vrPpAtmAddress
HexString }
vrPpAtmAddress OBJECT-TYPE
SYNTAX HexString (SIZE (0..20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the ATM address which is associated with
this protocol port. NHRP uses this address to establish shortcut
connections. This attribute is not displayed if NHRP is not
provisioned on this protocol port."
::= { vrPpNbmaAddressEntry 1 }
vrIfTableEntry OBJECT IDENTIFIER ::= { vr 10 }
vrIfTableEntryRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrIfTableEntryRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
vrIfTableEntry components."
::= { vrIfTableEntry 1 }
vrIfTableEntryRowStatusEntry OBJECT-TYPE
SYNTAX VrIfTableEntryRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrIfTableEntry component."
INDEX {
vrIndex,
vrIfTableEntryIndex }
::= { vrIfTableEntryRowStatusTable 1 }
VrIfTableEntryRowStatusEntry ::= SEQUENCE {
vrIfTableEntryRowStatus
RowStatus,
vrIfTableEntryComponentName
DisplayString,
vrIfTableEntryStorageType
StorageType,
vrIfTableEntryIndex
Integer32 }
vrIfTableEntryRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrIfTableEntry components.
These components cannot be added nor deleted."
::= { vrIfTableEntryRowStatusEntry 1 }
vrIfTableEntryComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrIfTableEntryRowStatusEntry 2 }
vrIfTableEntryStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrIfTableEntry tables."
::= { vrIfTableEntryRowStatusEntry 4 }
vrIfTableEntryIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrIfTableEntry tables."
::= { vrIfTableEntryRowStatusEntry 10 }
vrIfTableEntryIftTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrIfTableEntryIftEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group represents the SNMP interface table entry."
::= { vrIfTableEntry 10 }
vrIfTableEntryIftEntry OBJECT-TYPE
SYNTAX VrIfTableEntryIftEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrIfTableEntryIftTable."
INDEX {
vrIndex,
vrIfTableEntryIndex }
::= { vrIfTableEntryIftTable 1 }
VrIfTableEntryIftEntry ::= SEQUENCE {
vrIfTableEntryIfAdminStatus
INTEGER,
vrIfTableEntryIfOperStatus
INTEGER,
vrIfTableEntryIfLastChange
Unsigned32,
vrIfTableEntryIfInOctets
Counter32,
vrIfTableEntryIfOutOctets
Counter32,
vrIfTableEntryIfInDiscards
Counter32,
vrIfTableEntryIfOutDiscards
Counter32,
vrIfTableEntryIfInErrors
Counter32,
vrIfTableEntryIfOutErrors
Counter32,
vrIfTableEntryIfInUcastPkts
Counter32,
vrIfTableEntryIfOutUcastPkts
Counter32,
vrIfTableEntryIfInNuCastPkts
Counter32,
vrIfTableEntryIfOutNuCastPkts
Counter32,
vrIfTableEntryIfInUnknownProtos
Counter32,
vrIfTableEntryIfOutQlength
Gauge32,
vrIfTableEntryIfDescription
AsciiString,
vrIfTableEntryIfType
INTEGER,
vrIfTableEntryIfMtu
Unsigned32,
vrIfTableEntryIfSpeed
Unsigned32,
vrIfTableEntryIfPhysicalAddress
AsciiString,
vrIfTableEntryIfSpecific
IntegerSequence }
vrIfTableEntryIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The down state indicates the interface is not operational. The testing
state indicates that no operational packets can be passed."
DEFVAL { up }
::= { vrIfTableEntryIftEntry 2 }
vrIfTableEntryIfOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute provides the current operational status of the
interface. The testing state indicates that no operational packets can
be passed."
DEFVAL { down }
::= { vrIfTableEntryIftEntry 3 }
vrIfTableEntryIfLastChange OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last re-
initialization of the local network management subsystem, then this
object contains a zero value."
::= { vrIfTableEntryIftEntry 4 }
vrIfTableEntryIfInOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets received on the interface, including
framing characters."
::= { vrIfTableEntryIftEntry 5 }
vrIfTableEntryIfOutOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of octets transmitted out the interface, including
framing characters"
::= { vrIfTableEntryIftEntry 6 }
vrIfTableEntryIfInDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
deliverable to a higher layer protocol. One possible reason for
discarding such a packet could be to free up buffer space."
::= { vrIfTableEntryIftEntry 7 }
vrIfTableEntryIfOutDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their
being transmitted. One possible reason for discarding such a packet
could be to free up buffer space."
::= { vrIfTableEntryIftEntry 8 }
vrIfTableEntryIfInErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of inbound packet that contained errors preventing
them from being deliverable to a higher layer protocol."
::= { vrIfTableEntryIftEntry 9 }
vrIfTableEntryIfOutErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of outbound packets that could not be transmitted because
of errors."
::= { vrIfTableEntryIftEntry 10 }
vrIfTableEntryIfInUcastPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of subnetwork-unicast packets delivered to a higher-layer
protocol."
::= { vrIfTableEntryIftEntry 11 }
vrIfTableEntryIfOutUcastPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets that higher level protocols requested be
transmitted to a subnetwork-unicast address, including those that
were discarded or not sent."
::= { vrIfTableEntryIftEntry 12 }
vrIfTableEntryIfInNuCastPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of non-unicast (i.e., subnetwork- broadcast or
subnetwork-multicast) packets delivered to a higher-layer protocol."
::= { vrIfTableEntryIftEntry 13 }
vrIfTableEntryIfOutNuCastPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of packets that higher level protocols request be
transmitted to a non-unicast address, including those that were
discarded or not sent."
::= { vrIfTableEntryIftEntry 14 }
vrIfTableEntryIfInUnknownProtos OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets received via the interface which were
discarded because of an unknown or unsupported protocol."
::= { vrIfTableEntryIftEntry 15 }
vrIfTableEntryIfOutQlength OBJECT-TYPE
SYNTAX Gauge32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The length of the output packet queue (in packets)"
::= { vrIfTableEntryIftEntry 16 }
vrIfTableEntryIfDescription OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual string containing information about the interface. This
string includes the name of the manufacturer, the product name and
the version of the hardware interface."
::= { vrIfTableEntryIftEntry 17 }
vrIfTableEntryIfType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
ddnX25(4),
rfc877x25(5),
ethernetCsmacd(6),
ethernet8023(7),
tokenBus8024(8),
tokenring8025(9),
man802(10),
starLan(11),
hyperChannel(14),
fddi(15),
lapb(16),
sdlc(17),
ds1(18),
e1(19),
basicIsdn(20),
primaryIsdn(21),
propPointToPointSerial(22),
ppp(23),
ds3(30),
smds(31),
frameRelay(32),
frameRelayService(44),
v35(45),
hssi(46),
aflane8023(59),
aflane8025(60),
v11(64),
atmMpeVcEncap(1039),
atmMpeLlcEncap(1040),
ilsForwarder(1041),
ipTunnel(1042),
virtualMedia(1043) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of interface, distinguished according to the physical/link
protocol(s) immediately below the network layer in the protocol
stack"
::= { vrIfTableEntryIftEntry 18 }
vrIfTableEntryIfMtu OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The size of the largest datagram which can be sent/received on the
interface, specified in octets. For interfaces that are used for
transmitting network datagrams, this is the size of the largest
network datagram that can be sent on the interface."
::= { vrIfTableEntryIftEntry 19 }
vrIfTableEntryIfSpeed OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An estimate of the interface's current bandwidth in bits per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain the
nominal bandwidth."
::= { vrIfTableEntryIftEntry 20 }
vrIfTableEntryIfPhysicalAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..17))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface's address at the protocol layer immediately `below' the
network layer in the protocol stack. For interfaces which do not
have such an address (e.g., a serial line), this object should be an
octet string of zero length."
::= { vrIfTableEntryIftEntry 21 }
vrIfTableEntryIfSpecific OBJECT-TYPE
SYNTAX IntegerSequence
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A reference to MIB definitions specific to the particular media
being used to realize the interface. For example, if the interface is
realized by an ethernet, then the value of this object refers to a
document defining objects specific to ethernet. If this information is
not present, its value should be set to the OBJECT IDENTIFIER
0.0, which is a syntactically valid object identifier, and any
conformant implementation of ASN.1 and BER must be able to
generate and recognize this value."
::= { vrIfTableEntryIftEntry 22 }
vrIfTableEntryAdditionalInfoTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrIfTableEntryAdditionalInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains additional information associated with this
ifEntry."
::= { vrIfTableEntry 11 }
vrIfTableEntryAdditionalInfoEntry OBJECT-TYPE
SYNTAX VrIfTableEntryAdditionalInfoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrIfTableEntryAdditionalInfoTable."
INDEX {
vrIndex,
vrIfTableEntryIndex }
::= { vrIfTableEntryAdditionalInfoTable 1 }
VrIfTableEntryAdditionalInfoEntry ::= SEQUENCE {
vrIfTableEntryStdComponentName
RowPointer }
vrIfTableEntryStdComponentName OBJECT-TYPE
SYNTAX RowPointer
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute provides a component name associated with this
ifEntry. This component is the source of the data stored in this
entry. More data may be determined about this entry by looking at
the component associated with this component name."
::= { vrIfTableEntryAdditionalInfoEntry 1 }
vrQosP OBJECT IDENTIFIER ::= { vr 15 }
vrQosPRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrQosPRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
vrQosP components."
::= { vrQosP 1 }
vrQosPRowStatusEntry OBJECT-TYPE
SYNTAX VrQosPRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
vrQosP component."
INDEX {
vrIndex,
vrQosPIndex }
::= { vrQosPRowStatusTable 1 }
VrQosPRowStatusEntry ::= SEQUENCE {
vrQosPRowStatus
RowStatus,
vrQosPComponentName
DisplayString,
vrQosPStorageType
StorageType,
vrQosPIndex
Integer32 }
vrQosPRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
vrQosP components.
These components can be added and deleted."
::= { vrQosPRowStatusEntry 1 }
vrQosPComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { vrQosPRowStatusEntry 2 }
vrQosPStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
vrQosP tables."
::= { vrQosPRowStatusEntry 4 }
vrQosPIndex OBJECT-TYPE
SYNTAX Integer32 (0..3)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the vrQosP tables."
::= { vrQosPRowStatusEntry 10 }
vrQosPProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF VrQosPProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes all attributes that can be provisioned to define an
InwQualityofServiceProfile instance."
::= { vrQosP 10 }
vrQosPProvEntry OBJECT-TYPE
SYNTAX VrQosPProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the vrQosPProvTable."
INDEX {
vrIndex,
vrQosPIndex }
::= { vrQosPProvTable 1 }
VrQosPProvEntry ::= SEQUENCE {
vrQosPVnsDiscardPriority
Unsigned32,
vrQosPVnsEmissionPriority
Unsigned32,
vrQosPWanEmissionPriority
Unsigned32 }
vrQosPVnsDiscardPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the throughput importance of the packets when
forwarded over VNS connections. In times of congestion the discard
priority of a packet is used to determine whether the packet should be
discarded to reduce the heavy traffic load. Packets with lower discard
priority (numerically higher vdp) are more likely to be discarded than
packets with higher discard priority (numerically lower vdp). Discard
priority one (vdp 1) should be used for the most important traffic,
whereas discard priority three (vdp 3) should be used for the least
important traffic."
DEFVAL { 2 }
::= { vrQosPProvEntry 1 }
vrQosPVnsEmissionPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the delay importance of the packets when
forwarded over VNS connections. Packets with higher emission
priority (vep 1) are transmitted before packets with lower emission
priority (vep 2). Delay sensitive packets should be sent with
emission priority one (vep 1)."
DEFVAL { 2 }
::= { vrQosPProvEntry 2 }
vrQosPWanEmissionPriority OBJECT-TYPE
SYNTAX Unsigned32 (1..2)
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This attribute specifies the delay importance of the packets when
forwarded over WAN connections. Packets with higher emission
priority (wep 1) are transmitted before packets with lower emission
priority (wep 2). Delay sensitive packets should be sent with
emission priority one (wep 1). This attribute has been obsoleted and
is replaced by emissionPriority attribute under Vr/n Ip Pg/n
CosTreatment/n component."
DEFVAL { 2 }
::= { vrQosPProvEntry 3 }
virtualRouterGroup OBJECT IDENTIFIER ::= { virtualRouterMIB 1 }
virtualRouterGroupBE OBJECT IDENTIFIER ::= { virtualRouterGroup 5 }
virtualRouterGroupBE01 OBJECT IDENTIFIER ::= { virtualRouterGroupBE 2 }
virtualRouterGroupBE01A OBJECT IDENTIFIER ::= { virtualRouterGroupBE01 2 }
virtualRouterCapabilities OBJECT IDENTIFIER ::= { virtualRouterMIB 3 }
virtualRouterCapabilitiesBE OBJECT IDENTIFIER ::= { virtualRouterCapabilities 5 }
virtualRouterCapabilitiesBE01 OBJECT IDENTIFIER ::= { virtualRouterCapabilitiesBE 2 }
virtualRouterCapabilitiesBE01A OBJECT IDENTIFIER ::= { virtualRouterCapabilitiesBE01 2 }
END