Nortel-Magellan-Passport-VnetMcdnSigMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
DisplayString,
StorageType,
RowStatus,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
NonReplicated,
Link
FROM Nortel-Magellan-Passport-TextualConventionsMIB
sigChanIndex,
sigChan
FROM Nortel-Magellan-Passport-VoiceNetworkingMIB;
vnetMcdnSigMIB OBJECT IDENTIFIER ::= { passportMIBs 142 }
sigChanMcdn OBJECT IDENTIFIER ::= { sigChan 17 }
sigChanMcdnRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
sigChanMcdn components."
::= { sigChanMcdn 1 }
sigChanMcdnRowStatusEntry OBJECT-TYPE
SYNTAX SigChanMcdnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
sigChanMcdn component."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnRowStatusTable 1 }
SigChanMcdnRowStatusEntry ::= SEQUENCE {
sigChanMcdnRowStatus
RowStatus,
sigChanMcdnComponentName
DisplayString,
sigChanMcdnStorageType
StorageType,
sigChanMcdnIndex
NonReplicated }
sigChanMcdnRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
sigChanMcdn components.
These components can be added and deleted."
::= { sigChanMcdnRowStatusEntry 1 }
sigChanMcdnComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { sigChanMcdnRowStatusEntry 2 }
sigChanMcdnStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
sigChanMcdn tables."
::= { sigChanMcdnRowStatusEntry 4 }
sigChanMcdnIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the sigChanMcdn tables."
::= { sigChanMcdnRowStatusEntry 10 }
sigChanMcdnL2Table OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnL2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group specifies the provisionable layer 2 attributes of the
Q.931 ITU-T protocol."
::= { sigChanMcdn 11 }
sigChanMcdnL2Entry OBJECT-TYPE
SYNTAX SigChanMcdnL2Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnL2Table."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnL2Table 1 }
SigChanMcdnL2Entry ::= SEQUENCE {
sigChanMcdnT23
Unsigned32,
sigChanMcdnT200
Unsigned32,
sigChanMcdnN200
Unsigned32,
sigChanMcdnT203
Unsigned32,
sigChanMcdnCircuitSwitchedK
Unsigned32 }
sigChanMcdnT23 OBJECT-TYPE
SYNTAX Unsigned32 (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the layer 2 enable request timer."
DEFVAL { 10 }
::= { sigChanMcdnL2Entry 1 }
sigChanMcdnT200 OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum time between a layer 2 frame
and its acknowledgment."
DEFVAL { 1 }
::= { sigChanMcdnL2Entry 2 }
sigChanMcdnN200 OBJECT-TYPE
SYNTAX Unsigned32 (1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of re-transmissions of
a layer 2 frame."
DEFVAL { 3 }
::= { sigChanMcdnL2Entry 3 }
sigChanMcdnT203 OBJECT-TYPE
SYNTAX Unsigned32 (2..40)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum time for which layer 2 frames
may be absent. Expiry triggers a check on whether the far end is
alive."
DEFVAL { 10 }
::= { sigChanMcdnL2Entry 4 }
sigChanMcdnCircuitSwitchedK OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of sequentially
numbered I frames (that is, window size (k)) that may be
unacknowledged at any given time for a SAP supporting primary
rate (64kbit/sec) signalling."
DEFVAL { 7 }
::= { sigChanMcdnL2Entry 6 }
sigChanMcdnL3Table OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnL3Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group represents the provisionable Layer 3 timer attributes of
the MCDN signalling protocol."
::= { sigChanMcdn 12 }
sigChanMcdnL3Entry OBJECT-TYPE
SYNTAX SigChanMcdnL3Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnL3Table."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnL3Table 1 }
SigChanMcdnL3Entry ::= SEQUENCE {
sigChanMcdnT302
Unsigned32,
sigChanMcdnT304
Unsigned32,
sigChanMcdnT309
Unsigned32,
sigChanMcdnT310
Unsigned32,
sigChanMcdnT316
Unsigned32,
sigChanMcdnT317
Unsigned32 }
sigChanMcdnT302 OBJECT-TYPE
SYNTAX Unsigned32 (10..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the overlap receiving timer; in a UNI, this is
network to user, but for Peer to Peer it is all incoming calls. This
attribute is ignored if overlap signalling is disabled."
DEFVAL { 15 }
::= { sigChanMcdnL3Entry 1 }
sigChanMcdnT304 OBJECT-TYPE
SYNTAX Unsigned32 (10..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the overlap sending timer; in a UNI, this is
user to network, but for Peer to Peer it is all outgoing calls. This
attribute is ignored if overlap signalling is disabled."
DEFVAL { 10 }
::= { sigChanMcdnL3Entry 2 }
sigChanMcdnT309 OBJECT-TYPE
SYNTAX Unsigned32 (15..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the data link disconnect timer; used to ride
out temporary failures."
DEFVAL { 90 }
::= { sigChanMcdnL3Entry 3 }
sigChanMcdnT310 OBJECT-TYPE
SYNTAX Unsigned32 (10..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the call proceeding state timer."
DEFVAL { 10 }
::= { sigChanMcdnL3Entry 4 }
sigChanMcdnT316 OBJECT-TYPE
SYNTAX Unsigned32 (31..180)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the restart request response timer.
It must be set greater than t317."
DEFVAL { 120 }
::= { sigChanMcdnL3Entry 5 }
sigChanMcdnT317 OBJECT-TYPE
SYNTAX Unsigned32 (30..179)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the restart operation timer, used when a
RESTART was received."
DEFVAL { 30 }
::= { sigChanMcdnL3Entry 6 }
sigChanMcdnProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines the general options of the D-channel signalling
link."
::= { sigChanMcdn 13 }
sigChanMcdnProvEntry OBJECT-TYPE
SYNTAX SigChanMcdnProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnProvTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnProvTable 1 }
SigChanMcdnProvEntry ::= SEQUENCE {
sigChanMcdnSide
INTEGER,
sigChanMcdnMaxNonCallConcurrent
Unsigned32,
sigChanMcdnOverlapSending
INTEGER,
sigChanMcdnOverlapReceiving
INTEGER,
sigChanMcdnChanMaintenanceHandling
INTEGER }
sigChanMcdnSide OBJECT-TYPE
SYNTAX INTEGER {
network(1),
user(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether the interface provides layer 2 and 3
services equivalent to the ITU-T network or user side of the
connection. If this attribute is set to network, then the interface is
master during channel negotiation, and uses network side layer 2
command/response bits. If this attribute is set to user, then the
interface is slave during channel negotiation, and uses user side
layer 2 command/response bits.
Note that although a peer to peer protocol has no true network or
user side, for channel negotiation and layer 2 handling the peer to
peer and UNI protocols have identical function. A true UNI may
also have uni-directional messages and/or message elements; the
peer to peer has all elements bidirectional."
DEFVAL { network }
::= { sigChanMcdnProvEntry 1 }
sigChanMcdnMaxNonCallConcurrent OBJECT-TYPE
SYNTAX Unsigned32 (1..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of simultaneous active
non-call transactions that are allowed."
DEFVAL { 30 }
::= { sigChanMcdnProvEntry 2 }
sigChanMcdnOverlapSending OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether overlap sending to the PBX is
enabled."
DEFVAL { enabled }
::= { sigChanMcdnProvEntry 3 }
sigChanMcdnOverlapReceiving OBJECT-TYPE
SYNTAX INTEGER {
enabled(0),
disabled(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether overlap receiving from the PBX is
enabled."
DEFVAL { enabled }
::= { sigChanMcdnProvEntry 4 }
sigChanMcdnChanMaintenanceHandling OBJECT-TYPE
SYNTAX INTEGER {
globalOnStartup(0),
serviceMessage(1),
restartMessage(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies handling of channel maintenance events
such as locking and unlocking a channel or channel registration on
start-up. The decision here is whether to send individual channel
RESTART messages, SERVICE messages, or nothing. Note that
channel registration only occurs after the global interface restart at
startup.
The attribute controls start-up handling absolutely, and channel lock
and unlock conditionally. That is, setting this to enable SERVICE
messages ensures SERVICE messages at start-up and whenever a
channel goes into or out of service. However, if this is not set to
enable SERVICE messaging, a RESTART is always sent on
unlocking a channel.
globalOnStartup provides the minimum required function at start-
up, without any individual channel confirmation. Note that when
this is set, channel RESTART is still used for channel unlock.
globalOnStartup applies to SigChan start-up only.
serviceMessage enables sending and receiving SERVICE messages.
If enabled, SERVICE messages are always used for channel
maintenance on channel lock, channel unlock and start-up.
restartMessage provides individual channel RESTARTs when a
SigChan starts up. If enabled, the RESTART is used at start-up and
channel unlock. However, if both SERVICE and RESTART
messages are disabled, the RESTART will still be used when a
channel unlocks."
DEFVAL { restartMessage }
::= { sigChanMcdnProvEntry 5 }
sigChanMcdnStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { sigChanMcdn 14 }
sigChanMcdnStateEntry OBJECT-TYPE
SYNTAX SigChanMcdnStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnStateTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnStateTable 1 }
SigChanMcdnStateEntry ::= SEQUENCE {
sigChanMcdnAdminState
INTEGER,
sigChanMcdnOperationalState
INTEGER,
sigChanMcdnUsageState
INTEGER }
sigChanMcdnAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { sigChanMcdnStateEntry 1 }
sigChanMcdnOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { sigChanMcdnStateEntry 2 }
sigChanMcdnUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { sigChanMcdnStateEntry 3 }
sigChanMcdnStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the operational components for the McdnSig
component."
::= { sigChanMcdn 15 }
sigChanMcdnStatsEntry OBJECT-TYPE
SYNTAX SigChanMcdnStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnStatsTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnStatsTable 1 }
SigChanMcdnStatsEntry ::= SEQUENCE {
sigChanMcdnTotalCallsToIf
Counter32,
sigChanMcdnTotalCallsFromIf
Counter32,
sigChanMcdnNonCallAssocSessionsToIf
Counter32,
sigChanMcdnNonCallAssocSessionsFromIf
Counter32 }
sigChanMcdnTotalCallsToIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of calls that have been made
to the interface. The value wraps when it reaches its maximum."
::= { sigChanMcdnStatsEntry 2 }
sigChanMcdnTotalCallsFromIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of calls from the interface.
The value wraps when it reaches its maximum."
::= { sigChanMcdnStatsEntry 3 }
sigChanMcdnNonCallAssocSessionsToIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of non-call associated
sessions to the interface. The value wraps when it reaches its
maximum."
::= { sigChanMcdnStatsEntry 4 }
sigChanMcdnNonCallAssocSessionsFromIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of non-call associated
sessions from the interface. The value wraps when it reaches its
maximum."
::= { sigChanMcdnStatsEntry 5 }
sigChanMcdnOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the operational attributes for the MCDN
signalling."
::= { sigChanMcdn 16 }
sigChanMcdnOperEntry OBJECT-TYPE
SYNTAX SigChanMcdnOperEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnOperTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnOperTable 1 }
SigChanMcdnOperEntry ::= SEQUENCE {
sigChanMcdnActiveChannels
Unsigned32,
sigChanMcdnActiveVoiceChannels
Unsigned32,
sigChanMcdnActiveDataChannels
Unsigned32,
sigChanMcdnPeakActiveChannels
Unsigned32,
sigChanMcdnPeakActiveVoiceChannels
Unsigned32,
sigChanMcdnPeakActiveDataChannels
Unsigned32,
sigChanMcdnDChanStatus
INTEGER }
sigChanMcdnActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of currently active channels.
This includes data and voice channels."
DEFVAL { 0 }
::= { sigChanMcdnOperEntry 1 }
sigChanMcdnActiveVoiceChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of channels that are currently
carrying voice."
DEFVAL { 0 }
::= { sigChanMcdnOperEntry 2 }
sigChanMcdnActiveDataChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of channels that are currently
carrying data. This does not include modem data."
DEFVAL { 0 }
::= { sigChanMcdnOperEntry 3 }
sigChanMcdnPeakActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum number of channels that have
been active on this signalling channel during the last polling period."
DEFVAL { 0 }
::= { sigChanMcdnOperEntry 4 }
sigChanMcdnPeakActiveVoiceChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum number of voice channels that
have been active on this signalling channel during the last polling
period."
DEFVAL { 0 }
::= { sigChanMcdnOperEntry 5 }
sigChanMcdnPeakActiveDataChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..128)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum number of data channels that
have been active on this signalling channel during the last polling
period."
DEFVAL { 0 }
::= { sigChanMcdnOperEntry 6 }
sigChanMcdnDChanStatus OBJECT-TYPE
SYNTAX INTEGER {
outOfService(0),
establishing(1),
established(2),
enabling(3),
inService(4),
restarting(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the state of the D-channel.
outOfService means that there is no layer 2 or layer 3 connectivity
to the PBX.
establishing means that the signalling channel is attempting to stage
the layer 2.
established means that the layer 2 is enabled. If the signalling
channel stays in the established state, then it is waiting for a restart
from the PBX.
enabling means that the resources for processing calls are being
initialized. If the signalling channel stays in the enabling state then
it is waiting for a restart acknowledgement from the PBX.
inService means that the resources for processing calls are
available.
restarting means that the resources for call processing are being rei-
initialized."
::= { sigChanMcdnOperEntry 7 }
sigChanMcdnToolsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnToolsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This contains a series of operational attributes which turn on and off
several kinds of tracing."
::= { sigChanMcdn 17 }
sigChanMcdnToolsEntry OBJECT-TYPE
SYNTAX SigChanMcdnToolsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnToolsTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnToolsTable 1 }
SigChanMcdnToolsEntry ::= SEQUENCE {
sigChanMcdnTracing
OCTET STRING,
sigChanMcdnMessageTraced
OCTET STRING,
sigChanMcdnDirectionTraced
OCTET STRING }
sigChanMcdnTracing OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines which types of tracing are active for this
signalling channel. The tracing messages are sent to the debug
stream. To see the messages the agentQueue attribute in Col/debug
must be greater than 0 and a Telnet NMIS session must list the
debug stream in in its data streams (ex. set nmis telnet session/1
dataStreams debug). Different types of tracing can be enabled
simultaneously.
Note that tracing consumes additional CPU resources and will slow
down call processing on a heavily loaded card. If there is message
block exhaustion tracing will be suspended for a period and then
automatically reenabled. An alarm is generated on tracing
suspension and resumption. This mechanism protects the function
processor against excessive numbers of tracing messages.
Types of tracing include:
protocolErrors - get details of any protocol errors which are
occuring. Protocol errors are also reported in summary form as
alarms.
q931Summary - Summary of the Q.931 messages on the signalling
link, including certain call details (calling number, called number,
release codes).
q931Hex - Q.931 messages displayed in hex format. Useful to
determine protocol compliance in case of errors reported on local or
remote ends.
q931Symbolic - Q.931 messages parsed to give maximum detail.
Useful for understanding content of messages flowing on the link.
portHex - Messages in hex format being sent and received on the
link.
Description of bits:
protocolErrors(0)
q931Summary(1)
q931Hex(2)
q931Symbolic(3)
portHex(4)"
::= { sigChanMcdnToolsEntry 1 }
sigChanMcdnMessageTraced OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of ISDN messages that are to be
traced.
Description of bits:
alerting(0)
callProceeding(1)
connectionlessFacility(2)
congestionControl(3)
connect(4)
connectAcknowledge(5)
disconnect(6)
facility(7)
facilityAcknowledge(8)
facilityReject(9)
information(10)
notify(11)
progress(12)
register(13)
releaseComp(14)
release(15)
restart(16)
restartAcknowledge(17)
service(18)
serviceAcknowledge(19)
setup(20)
setupAcknowledge(21)
status(22)
statusEnquiry(23)
userInformation(24)
all(25)"
DEFVAL { 'ffffff80'H }
::= { sigChanMcdnToolsEntry 2 }
sigChanMcdnDirectionTraced OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the incoming (from PBX), outgoing
(to PBX), or both incoming and outgoing messages are traced.
Description of bits:
incoming(0)
outgoing(1)"
DEFVAL { 'c0'H }
::= { sigChanMcdnToolsEntry 3 }
sigChanMcdnClsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnClsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group enables and disables the support of the MCDN
proprietary signalling for connectionless features on the local
signalling channel."
::= { sigChanMcdn 18 }
sigChanMcdnClsEntry OBJECT-TYPE
SYNTAX SigChanMcdnClsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnClsTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnClsTable 1 }
SigChanMcdnClsEntry ::= SEQUENCE {
sigChanMcdnClsFeaturesSupported
OCTET STRING }
sigChanMcdnClsFeaturesSupported OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the features to be supported by MCDN
'TCAP' connectionless messaging. Note that some features such as
Network ACD combine connectionless and connection oriented. In
the NACD case, the connectionless messaging enables the source
and target PBXs to establish the networked relationship, and calls
sent across the network (connection oriented) will contain basic
information relating the call to the feature.
Feature Definitions:
networkAcd: transfer of a call from a pool of agents to a second
pool of agents across the network.
networkMessageService: message waiting capability (for example,
lamps on sets). Also includes signalling for voice mail, but is not
limited to voice mail.
networkVoiceMail: a specific subset of Network Message Service,
separated functionally as it always terminates on an interactive
voice response mailbox application.
networkRingAgain: ring again to remote sets.
electronicLock: change of set capabilities by a remote user dialling
the applicable code and password.
remoteCallForward: call forwarding a phone via applicable code
and password.
callPickupNetworkWide (call pickup world wide): scan for a
ringing call on another node, to enable the scanning set to pick up
the call.
networkPackage1: a collection of other features including but not
limited to network clock synchronization. Note that on the Meridian
1, this is a general purpose group used for very small features not
requiring a new ISDN Facility feature type.
isdnApplicationInterface: network wide support of a number of
Meridian 1 Application Module Link features.
mobilityMultisiteNetworking: the capability to use a wireless phone
in multiple sites, by having the phone register on arrival at the new
site, and having the PBX at the new site negotiate the set
'relocation' with the base PBX.
miscellaneous: Any feature that is not listed above.
Description of bits:
networkAcd(0)
networkMessageService(1)
networkRingAgain(2)
networkVoiceMail(3)
electronicLock(4)
remoteCallForward(5)
callPickupWorldWide(6)
networkPackage1(7)
isdnApplicationInterface(8)
mobilityMultisiteNetworking(9)
notused10(10)
notused11(11)
notused12(12)
notused13(13)
notused14(14)
miscellaneous(15)"
DEFVAL { 'ffc1'H }
::= { sigChanMcdnClsEntry 2 }
sigChanMcdnCoTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnCoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group enables and disables the support of the MCDN
proprietary signalling for the listed features on the local signalling
channel."
::= { sigChanMcdn 19 }
sigChanMcdnCoEntry OBJECT-TYPE
SYNTAX SigChanMcdnCoEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnCoTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex }
::= { sigChanMcdnCoTable 1 }
SigChanMcdnCoEntry ::= SEQUENCE {
sigChanMcdnDropBackCongestion
INTEGER,
sigChanMcdnNetworkNameDisplay
OCTET STRING,
sigChanMcdnMultisiteBusinessGroup
INTEGER,
sigChanMcdnConOrFeaturesSupported
OCTET STRING }
sigChanMcdnDropBackCongestion OBJECT-TYPE
SYNTAX INTEGER {
noDropBackAllowed(0),
dropBackToOriginator(1),
dropBackToPriorNode(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies if the Meridian 1 Drop Back Congestion
Handling for trunks is enabled, and what type is being supported."
DEFVAL { noDropBackAllowed }
::= { sigChanMcdnCoEntry 1 }
sigChanMcdnNetworkNameDisplay OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies what Name Display is supported.
nd1 corresponds to the Meridian 1 RCAP (Remote CAPability)
nd1. This translates as caller provides name info in SETUP, ringing
party name in ALERTING, redirection name in NOTIFY, and
answering party name in CONNECT (as applicable, and if the name
changes).
nd2 corresponds to the Meridian 1 RCAP (Remote CAPability)
nd2. This translates as caller provides name info in SETUP,
answering party provides name in NOTIFY on answer.
nd3 corresponds to the Meridian 1 RCAP (Remote CAPability)
nd3, which is nd1 plus name information in call clearing messages
(busy user, etc.) where a specific user was found but either could not
answer or cleared the call. This corresponds to the QSIG name
display.
Description of bits:
nameDisplay1(0)
nameDisplay2(1)
nameDisplay3(2)"
::= { sigChanMcdnCoEntry 4 }
sigChanMcdnMultisiteBusinessGroup OBJECT-TYPE
SYNTAX INTEGER {
transport(0),
discard(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether to enable transport for the
Meridian 1 Multisite Business Group IE. The Meridian 1 allows
multiple 'Tenants' to exist on a single PBX. These Tenants have
limited access to each other and to system resources. That is, users
associated with 'Tenant group one' cannot use trunks, attendants,
and features from another group, and so forth. The Multi-Site
Business Group is a single Tenant existing on more than one PBX.
As an example, 'tenant one' on a PBX may 'own' resources
belonging to 'tenant one' on another PBX. The Multi-Site
Business Group IE as used in the Meridian 1 Network Tenant
Services feature enables linking the two tenants together."
DEFVAL { transport }
::= { sigChanMcdnCoEntry 7 }
sigChanMcdnConOrFeaturesSupported OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the features to be supported by MCDN
'ROSE' connection oriented messaging.
Feature Definitions:
networkAttendantService: network wide support of Attendant
('operator') services.
classOfServiceTransport: this is not a ROSE feature. Class of
Service transport takes place in the called party number when
provisioned on the Meridian 1 to use an ESN signalling type.
trunkRouteOptimization: dropping of redundant links in a call,
when a set call forwards a call prior to answer.
remoteVirtualQueuing: queuing at a remote node without requiring
a B channel to be kept up.
offHookQueuing: Queuing by maintaining the speech path to the
queuing node.
networkCallTrace: call progress tracing across a network (that is,
call reached node a, node b, terminated at c,...).
networkIntercom: network wide access to an intercom system onm
a Meridian 1.
callPickupNetworkWide: connection oriented messages associated
with the TCAP call pickup scan operation. The messages that
actually pick up the ringing call.
radioPaging: access to a radio paging system network wide,
allowing single radio paging facilities in a relatively dense local
PBX network.
networkAccess: information to enable access to PBX features from
outside the network. Additional data is provided to identify access
capabilities for a spoecific call. (Similar to transmittiong
authorization code capabilities network wide.)
antiTromboning: actually includes two capabilities - NAS
(Network Attendant Setvice) and Trunk Anti-Tromboning. Calls
that exit the subnet to a PBX and are transferred back to a network
number via the same D channel can be optimized. If PBX A
(Passport A) calls across the subnet to Passport B, D channel Z, to
PBX B, and PBX B transfers across D channel Z to Passport B and
therefore to PBX C/Passport C, this allows tha call to simplify to
PBX/Passport A to PBX/Passport C.
miscellaneous: Any feature that is not listed above.
Description of bits:
networkAttendantService(0)
classOfServiceTransport(1)
trunkRouteOptimization(2)
remoteVirtualQueuing(3)
networkCallId(4)
offHookQueuing(5)
networkCallTrace(6)
networkIntercom(7)
callPickupNetworkWide(8)
radioPaging(9)
networkAccess(10)
antiTromboning(11)
miscellaneous(12)"
DEFVAL { 'fff8'H }
::= { sigChanMcdnCoEntry 8 }
sigChanMcdnFramer OBJECT IDENTIFIER ::= { sigChanMcdn 2 }
sigChanMcdnFramerRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnFramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
sigChanMcdnFramer components."
::= { sigChanMcdnFramer 1 }
sigChanMcdnFramerRowStatusEntry OBJECT-TYPE
SYNTAX SigChanMcdnFramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
sigChanMcdnFramer component."
INDEX {
sigChanIndex,
sigChanMcdnIndex,
sigChanMcdnFramerIndex }
::= { sigChanMcdnFramerRowStatusTable 1 }
SigChanMcdnFramerRowStatusEntry ::= SEQUENCE {
sigChanMcdnFramerRowStatus
RowStatus,
sigChanMcdnFramerComponentName
DisplayString,
sigChanMcdnFramerStorageType
StorageType,
sigChanMcdnFramerIndex
NonReplicated }
sigChanMcdnFramerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
sigChanMcdnFramer components.
These components cannot be added nor deleted."
::= { sigChanMcdnFramerRowStatusEntry 1 }
sigChanMcdnFramerComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { sigChanMcdnFramerRowStatusEntry 2 }
sigChanMcdnFramerStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
sigChanMcdnFramer tables."
::= { sigChanMcdnFramerRowStatusEntry 4 }
sigChanMcdnFramerIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the sigChanMcdnFramer tables."
::= { sigChanMcdnFramerRowStatusEntry 10 }
sigChanMcdnFramerProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnFramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups."
::= { sigChanMcdnFramer 10 }
sigChanMcdnFramerProvEntry OBJECT-TYPE
SYNTAX SigChanMcdnFramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnFramerProvTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex,
sigChanMcdnFramerIndex }
::= { sigChanMcdnFramerProvTable 1 }
SigChanMcdnFramerProvEntry ::= SEQUENCE {
sigChanMcdnFramerInterfaceName
Link }
sigChanMcdnFramerInterfaceName OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run."
::= { sigChanMcdnFramerProvEntry 1 }
sigChanMcdnFramerStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnFramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { sigChanMcdnFramer 12 }
sigChanMcdnFramerStateEntry OBJECT-TYPE
SYNTAX SigChanMcdnFramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnFramerStateTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex,
sigChanMcdnFramerIndex }
::= { sigChanMcdnFramerStateTable 1 }
SigChanMcdnFramerStateEntry ::= SEQUENCE {
sigChanMcdnFramerAdminState
INTEGER,
sigChanMcdnFramerOperationalState
INTEGER,
sigChanMcdnFramerUsageState
INTEGER }
sigChanMcdnFramerAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { sigChanMcdnFramerStateEntry 1 }
sigChanMcdnFramerOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { sigChanMcdnFramerStateEntry 2 }
sigChanMcdnFramerUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { sigChanMcdnFramerStateEntry 3 }
sigChanMcdnFramerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SigChanMcdnFramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational statistics data for a Framer
component."
::= { sigChanMcdnFramer 13 }
sigChanMcdnFramerStatsEntry OBJECT-TYPE
SYNTAX SigChanMcdnFramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the sigChanMcdnFramerStatsTable."
INDEX {
sigChanIndex,
sigChanMcdnIndex,
sigChanMcdnFramerIndex }
::= { sigChanMcdnFramerStatsTable 1 }
SigChanMcdnFramerStatsEntry ::= SEQUENCE {
sigChanMcdnFramerFrmToIf
Counter32,
sigChanMcdnFramerFrmFromIf
Counter32,
sigChanMcdnFramerOctetFromIf
Counter32,
sigChanMcdnFramerAborts
Counter32,
sigChanMcdnFramerCrcErrors
Counter32,
sigChanMcdnFramerLrcErrors
Counter32,
sigChanMcdnFramerNonOctetErrors
Counter32,
sigChanMcdnFramerOverruns
Counter32,
sigChanMcdnFramerUnderruns
Counter32,
sigChanMcdnFramerLargeFrmErrors
Counter32 }
sigChanMcdnFramerFrmToIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames transmitted to the link
interface by Framer.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 1 }
sigChanMcdnFramerFrmFromIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames received from the link
interface by Framer.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 2 }
sigChanMcdnFramerOctetFromIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of bytes received from the link
interface by Framer. This count wraps to zero when it exceeds its
maximum value."
::= { sigChanMcdnFramerStatsEntry 3 }
sigChanMcdnFramerAborts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of aborts received.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 4 }
sigChanMcdnFramerCrcErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames with CRC errors.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 5 }
sigChanMcdnFramerLrcErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames with LRC errors.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 6 }
sigChanMcdnFramerNonOctetErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames that were non octet
aligned.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 7 }
sigChanMcdnFramerOverruns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames received from the
link for which overruns occurred.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 8 }
sigChanMcdnFramerUnderruns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames transmitted to the
link for which underruns occurred.
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 9 }
sigChanMcdnFramerLargeFrmErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the total number of frames received which
were too large (longer than 500 bytes).
This count wraps to zero after reaching its maximum value."
::= { sigChanMcdnFramerStatsEntry 10 }
vnetMcdnSigGroup OBJECT IDENTIFIER ::= { vnetMcdnSigMIB 1 }
vnetMcdnSigGroupBE OBJECT IDENTIFIER ::= { vnetMcdnSigGroup 5 }
vnetMcdnSigGroupBE01 OBJECT IDENTIFIER ::= { vnetMcdnSigGroupBE 2 }
vnetMcdnSigGroupBE01A OBJECT IDENTIFIER ::= { vnetMcdnSigGroupBE01 2 }
vnetMcdnSigCapabilities OBJECT IDENTIFIER ::= { vnetMcdnSigMIB 3 }
vnetMcdnSigCapabilitiesBE OBJECT IDENTIFIER ::= { vnetMcdnSigCapabilities 5 }
vnetMcdnSigCapabilitiesBE01 OBJECT IDENTIFIER ::= { vnetMcdnSigCapabilitiesBE 2 }
vnetMcdnSigCapabilitiesBE01A OBJECT IDENTIFIER ::= { vnetMcdnSigCapabilitiesBE01 2 }
END