Nortel-Magellan-Passport-X25DteMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
components,
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
Counter32,
DisplayString,
StorageType,
RowStatus,
InterfaceIndex,
Gauge32,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
AsciiString,
NonReplicated,
DigitString,
HexString,
Link
FROM Nortel-Magellan-Passport-TextualConventionsMIB;
x25DteMIB OBJECT IDENTIFIER ::= { passportMIBs 48 }
x25Dte OBJECT IDENTIFIER ::= { components 90 }
x25DteRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25Dte components."
::= { x25Dte 1 }
x25DteRowStatusEntry OBJECT-TYPE
SYNTAX X25DteRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25Dte component."
INDEX {
x25DteIndex }
::= { x25DteRowStatusTable 1 }
X25DteRowStatusEntry ::= SEQUENCE {
x25DteRowStatus
RowStatus,
x25DteComponentName
DisplayString,
x25DteStorageType
StorageType,
x25DteIndex
Integer32 }
x25DteRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25Dte components.
These components can be added and deleted."
::= { x25DteRowStatusEntry 1 }
x25DteComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DteRowStatusEntry 2 }
x25DteStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25Dte tables."
::= { x25DteRowStatusEntry 4 }
x25DteIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25Dte tables."
::= { x25DteRowStatusEntry 10 }
x25DteCidDataTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteCidDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the attribute for a component's Customer
Identifier (CID). Refer to the attribute description for a detailed
explanation of CIDs."
::= { x25Dte 20 }
x25DteCidDataEntry OBJECT-TYPE
SYNTAX X25DteCidDataEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteCidDataTable."
INDEX {
x25DteIndex }
::= { x25DteCidDataTable 1 }
X25DteCidDataEntry ::= SEQUENCE {
x25DteCustomerIdentifier
Unsigned32 }
x25DteCustomerIdentifier OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..8191)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute holds the Customer Identifier (CID).
Every component has a CID. If a component has a cid attribute, the
component's CID is the provisioned value of that attribute;
otherwise the component inherits the CID of its parent. The top-
level component has a CID of 0.
Every operator session also has a CID, which is the CID
provisioned for the operator's user ID. An operator will see only the
stream data for components having a matching CID. Also, the
operator will be allowed to issue commands for only those
components which have a matching CID.
An operator CID of 0 is used to identify the Network Manager
(referred to as 'NetMan' in DPN). This CID matches the CID of
any component. Values 1 to 8191 inclusive (equivalent to 'basic
CIDs' in DPN) may be assigned to specific customers."
DEFVAL { 0 }
::= { x25DteCidDataEntry 1 }
x25DteIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the administrative set of parameters for the
X.25 interface."
::= { x25Dte 21 }
x25DteIfEntry OBJECT-TYPE
SYNTAX X25DteIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteIfTable."
INDEX {
x25DteIndex }
::= { x25DteIfTable 1 }
X25DteIfEntry ::= SEQUENCE {
x25DteInterfaceMode
INTEGER,
x25DteMaxActiveChannels
Unsigned32,
x25DteNumberOfPLcn
Unsigned32,
x25DtePacketSequencing
INTEGER,
x25DteT20RestartTimer
Unsigned32,
x25DteT21CallTimer
Unsigned32,
x25DteT22ResetTimer
Unsigned32,
x25DteT23ClearTimer
Unsigned32 }
x25DteInterfaceMode OBJECT-TYPE
SYNTAX INTEGER {
dte(1),
dce(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the packet mode in which the X.25 interface
operates. When this attribute is set to dte, interface on the other side
of the physical link must be configured as a dce."
DEFVAL { dte }
::= { x25DteIfEntry 1 }
x25DteMaxActiveChannels OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of channels that can
be active on this interface including the Permanent Lcns and the
Switched Lcns. In total maxActiveChannel will determine the
maximum number of Lcn components which may exist at a given
time. This should be set to a value greater or equal to the
numberOfPLcn provisioned."
DEFVAL { 10 }
::= { x25DteIfEntry 2 }
x25DteNumberOfPLcn OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the number of Permanent Logical Channels
that are supported on this X.25 interface (that is, the number of
PermLcn components that may be provisioned at this interface).
The PermLcn components use channel numbers starting from 1 and
up to lowestILChannelNumber.
A value of 0 for this attribute indicates that no Permanent Logical
channels are supported on this X.25 interface."
DEFVAL { 0 }
::= { x25DteIfEntry 3 }
x25DtePacketSequencing OBJECT-TYPE
SYNTAX INTEGER {
modulo8(1),
modulo128(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the sequence numbering of packets for the
X.25 interface. The value of this attribute must be the same as the
packet sequencing configured at the X.25 interface on the other side
of the physical link."
DEFVAL { modulo8 }
::= { x25DteIfEntry 4 }
x25DteT20RestartTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..65536000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute provides the period in milliseconds within which a
restart request packet should be confirmed."
DEFVAL { 60000 }
::= { x25DteIfEntry 5 }
x25DteT21CallTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..65536000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute provides the period in milliseconds within which a
call request packet should be confirmed."
DEFVAL { 180000 }
::= { x25DteIfEntry 6 }
x25DteT22ResetTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..65536000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute provides the period in milliseconds within which a
reset request packet should be confirmed."
DEFVAL { 60000 }
::= { x25DteIfEntry 7 }
x25DteT23ClearTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..65536000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute provides the period in milliseconds within which a
clear request packet should be confirmed."
DEFVAL { 60000 }
::= { x25DteIfEntry 8 }
x25DteLcnCTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLcnCEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the Logical
Channel configuration of the X.25 Interface. The logical channel
range table is ordered as follows:
Permanent Logical Channels(PLC),
One-way Incoming Channels (IC),
Two-way Channels(TC) and
One-way Outgoing Channels (OC),
in a consecutive manner."
::= { x25Dte 22 }
x25DteLcnCEntry OBJECT-TYPE
SYNTAX X25DteLcnCEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLcnCTable."
INDEX {
x25DteIndex }
::= { x25DteLcnCTable 1 }
X25DteLcnCEntry ::= SEQUENCE {
x25DteLowestILChannelNumber
Unsigned32,
x25DteHighestILChannelNumber
Unsigned32,
x25DteLowestTLChannelNumber
Unsigned32,
x25DteHighestTLChannelNumber
Unsigned32,
x25DteLowestOLChannelNumber
Unsigned32,
x25DteHighestOLChannelNumber
Unsigned32 }
x25DteLowestILChannelNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the lowest Lcn number of the One-way
Incoming Channel range for this X.25 interface. The value for this
attribute must be greater than the numberOfPLcn attribute."
DEFVAL { 0 }
::= { x25DteLcnCEntry 1 }
x25DteHighestILChannelNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the highest Lcn number of the One-way
Incoming Channel range for this X.25 interface. A value of 0
indicates that there are no channels in this range."
DEFVAL { 0 }
::= { x25DteLcnCEntry 2 }
x25DteLowestTLChannelNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the lowest Lcn number of the Two-way
Channel range for this X.25 interface. The value for this attribute
must be greater than the highestILChannelNumber attribute."
DEFVAL { 1 }
::= { x25DteLcnCEntry 3 }
x25DteHighestTLChannelNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the highest Lcn number of the Two-way
Channel range for this X.25 interface. A value of 0 indicates that
there are no channels in this range."
DEFVAL { 20 }
::= { x25DteLcnCEntry 4 }
x25DteLowestOLChannelNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the lowest Lcn number of the One-way
Outgoing Channel range for this X.25 interface. The value for this
attribute must be greater than the highestTLChannelNumber
attribute."
DEFVAL { 0 }
::= { x25DteLcnCEntry 5 }
x25DteHighestOLChannelNumber OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the highest Lcn number of the One-way
Outgoing Channel range for this X.25 interface. A value of 0
indicates that there are no channels in this range."
DEFVAL { 0 }
::= { x25DteLcnCEntry 6 }
x25DteDcpTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteDcpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes giving the default
call parameters used by all the logical channels during call setup. It
is possible that different default call parameters will be used for a
particular call, based on the Peer component for the given call. The
actual call parameters operational for a given call are found in the
Lcn component."
::= { x25Dte 23 }
x25DteDcpEntry OBJECT-TYPE
SYNTAX X25DteDcpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteDcpTable."
INDEX {
x25DteIndex }
::= { x25DteDcpTable 1 }
X25DteDcpEntry ::= SEQUENCE {
x25DteInPacketSize
Unsigned32,
x25DteOutPacketSize
Unsigned32,
x25DteInWindowSize
Unsigned32,
x25DteOutWindowSize
Unsigned32,
x25DteAcceptReverseCharging
INTEGER,
x25DteProposeReverseCharging
INTEGER,
x25DteOutThroughputClassSize
INTEGER,
x25DteInThroughputClassSize
INTEGER,
x25DteCugIndex
AsciiString,
x25DteCugoaIndex
AsciiString,
x25DteChargingInformation
INTEGER,
x25DteRpoa
AsciiString,
x25DteTrnstDlySlctnAInd
Unsigned32,
x25DteCallingNetworkFax
HexString,
x25DteCalledNetworkFax
HexString,
x25DteCallUserData
HexString }
x25DteInPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum receive packet size in octets
for the X.25 interface."
DEFVAL { 128 }
::= { x25DteDcpEntry 1 }
x25DteOutPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum transmit packet size in octets
for the X.25 interface."
DEFVAL { 128 }
::= { x25DteDcpEntry 2 }
x25DteInWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum receive window size for the
X.25 interface. A window size greater than 7 is only valid when the
packetSequencing attribute is set to modulo128."
DEFVAL { 2 }
::= { x25DteDcpEntry 3 }
x25DteOutWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum transmit window size for the
X.25 interface. A window size greater than 7 is only valid when the
packetSequencing is set to modulo128."
DEFVAL { 2 }
::= { x25DteDcpEntry 4 }
x25DteAcceptReverseCharging OBJECT-TYPE
SYNTAX INTEGER {
accept(2),
refuse(3),
neverAccept(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether local end will accept or refuse
charges for a call. A value of neverAccept is only used at the X.25
interface level and indicates that this interface will never accept
reverse charging (that is no Peer component can override this
parameter, allowing reverse charged calls to be accepted)."
DEFVAL { refuse }
::= { x25DteDcpEntry 5 }
x25DteProposeReverseCharging OBJECT-TYPE
SYNTAX INTEGER {
reverse(2),
local(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether local/reverse charging is signalled
in the call request packet."
DEFVAL { local }
::= { x25DteDcpEntry 6 }
x25DteOutThroughputClassSize OBJECT-TYPE
SYNTAX INTEGER {
n75(3),
n150(4),
n300(5),
n600(6),
n1200(7),
n2400(8),
n4800(9),
n9600(10),
n19200(11),
n48000(12),
n64000(13),
notSpecified(17) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the transmit throughput class to
be negotiated. A value of notSpecified means the facility is not
signalled."
DEFVAL { notSpecified }
::= { x25DteDcpEntry 8 }
x25DteInThroughputClassSize OBJECT-TYPE
SYNTAX INTEGER {
n75(3),
n150(4),
n300(5),
n600(6),
n1200(7),
n2400(8),
n4800(9),
n9600(10),
n19200(11),
n48000(12),
n64000(13),
notSpecified(17) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the receive throughput class to
be negotiated. A value of notSpecified means the facility is not
signalled."
DEFVAL { notSpecified }
::= { x25DteDcpEntry 9 }
x25DteCugIndex OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the index of the Closed User Group facility
to signal. The index consists of two or four octets each representing
a digit in the range of 0 to 9. A value of null (empty string) at the
X.25 interface means no CUG facility is signalled. If a cugIndex is
provisioned to be signalled, the cugoaIndex attribute must be null."
DEFVAL { ''H }
::= { x25DteDcpEntry 10 }
x25DteCugoaIndex OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the index of the Close User Group with
Outgoing Access facility to signal. The index consists of two or four
octets each representing a digit in the range of 0 to 9. A value of
null (empty string) at the X.25 interface means no CUGOA facility
is signalled. If a cugoaIndex is provisioned to be signalled, the
cugIndex attribute must be null."
DEFVAL { ''H }
::= { x25DteDcpEntry 11 }
x25DteChargingInformation OBJECT-TYPE
SYNTAX INTEGER {
notSpecified(2),
notRequested(3),
requested(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether the charging information facility is
to be signalled in a call request packet. A value of notSpecified
means the facility is not signalled. A value of notRequested means
the facility is signalled but charging information is not requested
(that is, the charging info field of the facility is set Off). A value of
requested means the facility is signalled to explicitly request
charging information."
DEFVAL { notSpecified }
::= { x25DteDcpEntry 13 }
x25DteRpoa OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the RPOA facility to signal in a
call request packet. The value of null (empty string) at the X.25
interface means no RPOA facility is signalled."
DEFVAL { ''H }
::= { x25DteDcpEntry 14 }
x25DteTrnstDlySlctnAInd OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the Transit Delay Selection and
Indication facility to signal in a call request packet. A value of
65536 at the X.25 interface level means no TDSAI facility is
signalled."
DEFVAL { 65536 }
::= { x25DteDcpEntry 15 }
x25DteCallingNetworkFax OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Calling Network facilities to be signalled
in a call request packet. A value of null (empty string) at the X.25
interface means no facilities are signalled."
DEFVAL { ''H }
::= { x25DteDcpEntry 24 }
x25DteCalledNetworkFax OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the called network facilities to be signalled
in a call request packet. A value of null (empty string) at the X.25
interface means no facilities are signalled."
DEFVAL { ''H }
::= { x25DteDcpEntry 25 }
x25DteCallUserData OBJECT-TYPE
SYNTAX HexString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the user data to be signalled in the call
request packet. A value of null (empty string) means no user data is
signalled."
DEFVAL { ''H }
::= { x25DteDcpEntry 26 }
x25DteIfEntryTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteIfEntryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the ifEntry."
::= { x25Dte 24 }
x25DteIfEntryEntry OBJECT-TYPE
SYNTAX X25DteIfEntryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteIfEntryTable."
INDEX {
x25DteIndex }
::= { x25DteIfEntryTable 1 }
X25DteIfEntryEntry ::= SEQUENCE {
x25DteIfAdminStatus
INTEGER,
x25DteIfIndex
InterfaceIndex }
x25DteIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed."
DEFVAL { up }
::= { x25DteIfEntryEntry 1 }
x25DteIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process."
::= { x25DteIfEntryEntry 2 }
x25DteStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { x25Dte 25 }
x25DteStateEntry OBJECT-TYPE
SYNTAX X25DteStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteStateTable."
INDEX {
x25DteIndex }
::= { x25DteStateTable 1 }
X25DteStateEntry ::= SEQUENCE {
x25DteAdminState
INTEGER,
x25DteOperationalState
INTEGER,
x25DteUsageState
INTEGER }
x25DteAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { x25DteStateEntry 1 }
x25DteOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { x25DteStateEntry 2 }
x25DteUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { x25DteStateEntry 3 }
x25DteOperStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes the Operational Status attribute. This attribute
defines the current operational state of this component."
::= { x25Dte 26 }
x25DteOperStatusEntry OBJECT-TYPE
SYNTAX X25DteOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteOperStatusTable."
INDEX {
x25DteIndex }
::= { x25DteOperStatusTable 1 }
X25DteOperStatusEntry ::= SEQUENCE {
x25DteSnmpOperStatus
INTEGER }
x25DteSnmpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed."
DEFVAL { up }
::= { x25DteOperStatusEntry 1 }
x25DteOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteOpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational status of the X.25 interface."
::= { x25Dte 27 }
x25DteOpEntry OBJECT-TYPE
SYNTAX X25DteOpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteOpTable."
INDEX {
x25DteIndex }
::= { x25DteOpTable 1 }
X25DteOpEntry ::= SEQUENCE {
x25DteInterfaceState
INTEGER }
x25DteInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
notReady(0),
localRestarting(1),
remoteRestarting(2),
ready(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the state of the interface. The notReady
state, is the initial state of the service, when it is being initialized.
The localRestarting state is entered when a Restart packet is sent to
the link and the interface is waiting for a response. The
remoteRestarting state is entered when a Restart packet is received
from the link, and is being processed. In ready state, the service is
operational and ready to provide service."
::= { x25DteOpEntry 1 }
x25DteStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This component contains the statistics for the X.25 interface."
::= { x25Dte 28 }
x25DteStatsEntry OBJECT-TYPE
SYNTAX X25DteStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteStatsTable."
INDEX {
x25DteIndex }
::= { x25DteStatsTable 1 }
X25DteStatsEntry ::= SEQUENCE {
x25DteInCalls
Counter32,
x25DteInCallRefusals
Counter32,
x25DteInPrvdrInitiatedClrs
Counter32,
x25DteInRmtInitiatedRsts
Counter32,
x25DteInPrvdrInitiatedRsts
Counter32,
x25DteInRestarts
Counter32,
x25DteInDataPackets
Counter32,
x25DteInPktsAcusdOfPrtclErr
Counter32,
x25DteInInterruptPackets
Counter32,
x25DteOutCallAttempts
Counter32,
x25DteOutCallFailures
Counter32,
x25DteOutInterruptPackets
Counter32,
x25DteOutDataPackets
Counter32,
x25DteOutActiveChannels
Counter32,
x25DteInActiveChannels
Counter32,
x25DteTwowayActiveChannels
Counter32,
x25DteT20RestartTimeouts
Counter32,
x25DteT21CallTimeouts
Counter32,
x25DteT22ResetTimeouts
Counter32,
x25DteT23ClearTimeouts
Counter32 }
x25DteInCalls OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of call packets received from link."
::= { x25DteStatsEntry 1 }
x25DteInCallRefusals OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of calls received from the link
which have been cleared. This includes calls cleared by the X.25
interface and calls cleared by the higher level."
::= { x25DteStatsEntry 2 }
x25DteInPrvdrInitiatedClrs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of clear packets received from the
link with a cause code other than DTE initiated."
::= { x25DteStatsEntry 3 }
x25DteInRmtInitiatedRsts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of reset packets received from the
link with the cause code DTE initiated."
::= { x25DteStatsEntry 4 }
x25DteInPrvdrInitiatedRsts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of reset packets received from the
link with the cause code other than DTE initiated."
::= { x25DteStatsEntry 5 }
x25DteInRestarts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of restart packets received from the
link while the service is in ready state."
::= { x25DteStatsEntry 6 }
x25DteInDataPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of data packets received from link."
::= { x25DteStatsEntry 7 }
x25DteInPktsAcusdOfPrtclErr OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of clear, reset, restart and
diagnostic packets received from link containing a procedure error
cause code."
::= { x25DteStatsEntry 8 }
x25DteInInterruptPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attributes counts the number of interrupt packets received from
link."
::= { x25DteStatsEntry 9 }
x25DteOutCallAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of call packets sent from this
interface."
::= { x25DteStatsEntry 10 }
x25DteOutCallFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of call attempts from this interface
that failed. This includes calls that were cleared because of
restrictive fast select."
::= { x25DteStatsEntry 11 }
x25DteOutInterruptPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of interrupt packets sent to the
link."
::= { x25DteStatsEntry 12 }
x25DteOutDataPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of data packets sent to the link."
::= { x25DteStatsEntry 13 }
x25DteOutActiveChannels OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of One-way Outgoing Channels
that are currently in use. This counter includes the call requests that
have not been accepted."
::= { x25DteStatsEntry 14 }
x25DteInActiveChannels OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates number of One-way Incoming Channels that
are currently active."
::= { x25DteStatsEntry 15 }
x25DteTwowayActiveChannels OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of Two-way Channels that are in
use. This includes call requests sent but not yet accepted."
::= { x25DteStatsEntry 16 }
x25DteT20RestartTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the T20 restart timer has
expired."
::= { x25DteStatsEntry 17 }
x25DteT21CallTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the T21 call timer has
expired."
::= { x25DteStatsEntry 18 }
x25DteT22ResetTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the T22 reset timer has
expired."
::= { x25DteStatsEntry 19 }
x25DteT23ClearTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the T23 clear timer has
expired."
::= { x25DteStatsEntry 20 }
x25DtePeer OBJECT IDENTIFIER ::= { x25Dte 2 }
x25DtePeerRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePeerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25DtePeer components."
::= { x25DtePeer 1 }
x25DtePeerRowStatusEntry OBJECT-TYPE
SYNTAX X25DtePeerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DtePeer component."
INDEX {
x25DteIndex,
x25DtePeerIndex }
::= { x25DtePeerRowStatusTable 1 }
X25DtePeerRowStatusEntry ::= SEQUENCE {
x25DtePeerRowStatus
RowStatus,
x25DtePeerComponentName
DisplayString,
x25DtePeerStorageType
StorageType,
x25DtePeerIndex
Integer32 }
x25DtePeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DtePeer components.
These components can be added and deleted."
::= { x25DtePeerRowStatusEntry 1 }
x25DtePeerComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DtePeerRowStatusEntry 2 }
x25DtePeerStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DtePeer tables."
::= { x25DtePeerRowStatusEntry 4 }
x25DtePeerIndex OBJECT-TYPE
SYNTAX Integer32 (1..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DtePeer tables."
::= { x25DtePeerRowStatusEntry 10 }
x25DtePeerIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePeerIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group provides the administrative set of parameters for the
Peer interface."
::= { x25DtePeer 10 }
x25DtePeerIfEntry OBJECT-TYPE
SYNTAX X25DtePeerIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePeerIfTable."
INDEX {
x25DteIndex,
x25DtePeerIndex }
::= { x25DtePeerIfTable 1 }
X25DtePeerIfEntry ::= SEQUENCE {
x25DtePeerEncAddressType
INTEGER,
x25DtePeerEncAddress
AsciiString,
x25DtePeerX25Address
DigitString,
x25DtePeerLinkToRemoteGroup
Link }
x25DtePeerEncAddressType OBJECT-TYPE
SYNTAX INTEGER {
ip(204) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the encapsulation type for the address of the
remote host with which this Peer component allows
communication."
DEFVAL { ip }
::= { x25DtePeerIfEntry 1 }
x25DtePeerEncAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the encapsulation address of the remote host
with which this Peer component allows communication. This
address must correspond with the encapsulation address type. Thus
in the case of IP, it will contain a IP address."
::= { x25DtePeerIfEntry 2 }
x25DtePeerX25Address OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the X.25 address that identifies the remote
host with which this Peer component allows communication. The
remote X.25 interface could be subdivided through the use of
RemoteGroup components; in which case this x25Address is the
X.25 address of the destination's RemoteGroup (not to be confused
with the RemoteGroup indicated by the linkToRemoteGroup
attribute of THIS Peer component)."
::= { x25DtePeerIfEntry 3 }
x25DtePeerLinkToRemoteGroup OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a link to a RemoteGroup component. The RemoteGroup
components logically divide up the X.25 Interface such that a
number of Protocol Ports (and consequently a number of Virtual
Routers) may share the same X.25 Interface into a Wide Area
Network. In particular, the remote host identified by this Peer
component is designated as belonging to the RemoteGroup linked
by this attribute. The set of all Peer components and PermLcn
components which link to a given RemoteGroup determine the
subset of remote hosts which are accessible to a particular Protocol
Port (and ultimately a Virtual Router)."
::= { x25DtePeerIfEntry 4 }
x25DtePeerCpTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePeerCpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the call parameters used to establish a call to/
from the remote host identified by this Peer component"
::= { x25DtePeer 12 }
x25DtePeerCpEntry OBJECT-TYPE
SYNTAX X25DtePeerCpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePeerCpTable."
INDEX {
x25DteIndex,
x25DtePeerIndex }
::= { x25DtePeerCpTable 1 }
X25DtePeerCpEntry ::= SEQUENCE {
x25DtePeerInPacketSize
Unsigned32,
x25DtePeerOutPacketSize
Unsigned32,
x25DtePeerInWindowSize
Unsigned32,
x25DtePeerOutWindowSize
Unsigned32,
x25DtePeerAcceptReverseCharging
INTEGER,
x25DtePeerProposeReverseCharging
INTEGER,
x25DtePeerOutThroughputClassSize
INTEGER,
x25DtePeerInThroughputClassSize
INTEGER,
x25DtePeerCugIndex
AsciiString,
x25DtePeerCugoaIndex
AsciiString,
x25DtePeerNetworkUserIdentifier
HexString,
x25DtePeerChargingInformation
INTEGER,
x25DtePeerRpoa
AsciiString,
x25DtePeerTrnstDlySlctnAInd
Unsigned32,
x25DtePeerCallingNetworkFax
HexString,
x25DtePeerCalledNetworkFax
HexString,
x25DtePeerCallUserData
HexString }
x25DtePeerInPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default maximum receive packet size in
octets. A setting of 0 indicates the inPacketSize setting for the X.25
interface (in X25Dte component) is used during call setup to the
remote host identified by this Peer component."
DEFVAL { 128 }
::= { x25DtePeerCpEntry 1 }
x25DtePeerOutPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default maximum transmit packet size in
octets. A setting of 0 indicates the outPacketSize setting for the
X.25 interface (in the X25Dte component) is used during call setup
to the remote host identified by this Peer component."
DEFVAL { 128 }
::= { x25DtePeerCpEntry 2 }
x25DtePeerInWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default receive window size. A window
size of 0 indicates the inWindowSize setting for the X.25 interface
(in the X25Dte component) is used during call setup to the remote
host identified by this Peer component. A window size greater than
7 is only valid when the packetSequencing attribute of the X25Dte
component is set to modulo128."
DEFVAL { 2 }
::= { x25DtePeerCpEntry 3 }
x25DtePeerOutWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default transmit window size. A window
size of 0 indicates the outWindowSize setting for the X.25 interface
is used during call setup to the Peer identified by this component. A
window size greater than 7 is only valid when the packetSequencing
attribute of the X25Dte component is set to modulo128."
DEFVAL { 2 }
::= { x25DtePeerCpEntry 4 }
x25DtePeerAcceptReverseCharging OBJECT-TYPE
SYNTAX INTEGER {
default(1),
accept(2),
refuse(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether the local end will accept or refuse
charges for a call from the remote host identified by this Peer
component. A value of default indicates the use of the
acceptReverseCharging value from the X25Dte component. If the
value at the X25Dte level is neverAccept, a value of accept in this
Peer component will be ignored because no reverse charge calls are
to be accepted by this X.25 Dte."
DEFVAL { refuse }
::= { x25DtePeerCpEntry 5 }
x25DtePeerProposeReverseCharging OBJECT-TYPE
SYNTAX INTEGER {
default(1),
reverse(2),
local(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether local/reverse charging is signalled
in a call request packet. A value of default indicates the use of the
value from the proposeReverseCharging attribute of the X25Dte
component."
DEFVAL { local }
::= { x25DtePeerCpEntry 6 }
x25DtePeerOutThroughputClassSize OBJECT-TYPE
SYNTAX INTEGER {
n75(3),
n150(4),
n300(5),
n600(6),
n1200(7),
n2400(8),
n4800(9),
n9600(10),
n19200(11),
n48000(12),
n64000(13),
notSpecified(17),
default(18) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the transmit throughput class to
be negotiated. A value of default indicates the use of the value from
the outThroughputClassSize attribute of the X25Dte component. A
value of notSpecified means the facility is not signalled."
DEFVAL { notSpecified }
::= { x25DtePeerCpEntry 8 }
x25DtePeerInThroughputClassSize OBJECT-TYPE
SYNTAX INTEGER {
n75(3),
n150(4),
n300(5),
n600(6),
n1200(7),
n2400(8),
n4800(9),
n9600(10),
n19200(11),
n48000(12),
n64000(13),
notSpecified(17),
default(18) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the receive throughput class to
be negotiated. A value of default indicates the use of the value from
the inThroughputClassSize attribute of the X25Dte component. A
value of notSpecified means the facility is not signalled."
DEFVAL { notSpecified }
::= { x25DtePeerCpEntry 9 }
x25DtePeerCugIndex OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the index of the Closed User Group facility
to signal. A value of 'DEF' indicates the use of the value from the
cugIndex attribute of the X25Dte component. A value of null
(empty string) indicates no CUG facility is to be signalled. If a
cugIndex is provisioned to be signalled, the cugoaIndex attribute
must be null."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 10 }
x25DtePeerCugoaIndex OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the index of the Closed User Group with
Outgoing Access facility to signal. A value of 'DEF' indicates the
use of the value from the cugoaIndex attribute of the X25Dte
component. A value of null (empty string) indicates no CUGOA
facility is to be signalled. If a cugoaIndex is provisioned to be
signalled, the cugIndex attribute must be null."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 11 }
x25DtePeerNetworkUserIdentifier OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Network User Identifier facility to signal.
A value of null (empty string) indicates no NUI facility is to be
signalled."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 12 }
x25DtePeerChargingInformation OBJECT-TYPE
SYNTAX INTEGER {
default(1),
notSpecified(2),
notRequested(3),
requested(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies whether the charging information facility is
signalled in the call request packet. A value of default indicates the
use of the value from the chargingInformation attribute of the
X25Dte component. A value of notSpecified means the facility is
not signalled. A value of notRequested means the facility is
signalled but charging information is not requested (that is, the
charging info field of the facility is set Off). A value of requested
means the facility is signalled to explicitly request charging
information."
DEFVAL { notSpecified }
::= { x25DtePeerCpEntry 13 }
x25DtePeerRpoa OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the RPOA facility to signal in a call request
packet. A value of 'DEF' indicates the use of the value from the
rpoa attribute of the X25Dte component. A value of null (empty
string) indicates no RPOA facility is to be signalled."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 14 }
x25DtePeerTrnstDlySlctnAInd OBJECT-TYPE
SYNTAX Unsigned32 (0..65537)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the value of the Transit Delay Selection and
Indication facility to signal in a call request packet. A value of
65536 indicates no facility is signalled. A value of 65537 indicates
the use of the value from the trnstDlySlctnAInd attribute of the
X25Dte component."
DEFVAL { 65536 }
::= { x25DtePeerCpEntry 15 }
x25DtePeerCallingNetworkFax OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Calling Network facilities to signal in a
call request packet. The facilities are encoded here exactly as they
are encoded in the call packet. These facilities do not include the
marker facility code. A value of null (empty string) indicates the
callingNetworkFax from the X25Dte are to be signalled. If that
value is also null, no Calling Network Facilities are signalled."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 24 }
x25DtePeerCalledNetworkFax OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Called Network facilities to signal in a
call request packet. The facilities are encoded here exactly as they
are encoded in the call packet. These facilities do not include the
marker facility code. A value of null (empty string) indicates the
calledNetworkFax from the X25Dte are to be signalled. If that value
is also null, no Called Network Facilities are signalled."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 25 }
x25DtePeerCallUserData OBJECT-TYPE
SYNTAX HexString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the user data to signal in a call request
packet. A value of null (empty string) indicates that the
callUserData from the X25Dte is to be signalled. If callUserData of
the X25Dte component is also null and protocolEncType of this
Peer has the value IP, H.CC will be signalled as the call user data of
a call request packet. Thus for IP encapsulation according to
RFC1356, both the callUserData from the Peer and X25Dte
components must be null and the protocolEncType set to IP."
DEFVAL { ''H }
::= { x25DtePeerCpEntry 26 }
x25DtePeerPEncTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePeerPEncEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each instance of this replicated attribute describes an encapsulation
method permitted for encapsulating the protocol data units (PDUs)
of an upper layer protocol when communicating with the remote
host identified by this Peer component. The index of a given
replicated instance of this attribute represents the relative priority of
the encapsulation method specified by the given attribute instance.
An attribute with index '1' has the highest priority, so the
encapsulation method described by it will be the first one attempted
when signalling a call to the link. If the protocolEncType is set to
IP to encapsulate IP traffic according to RFC1356, the
callUserData for this Peer component and the X25Dte component
must both be null, so that H.CC will be signalled as the call user
data of the call request. This indicates that the protocol
encapsulation type of IP is to be used for the channel.
A call received from the link will be accepted as long as the
encapsulation method indicated in the call user data of the incoming
call packet is included in one of these replicated attributes. (This
presupposes that the incoming call has been directed to the
RemoteGroup to which this Peer is linked through the
linkToRemoteGroup attribute.)"
::= { x25DtePeer 208 }
x25DtePeerPEncEntry OBJECT-TYPE
SYNTAX X25DtePeerPEncEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePeerPEncTable."
INDEX {
x25DteIndex,
x25DtePeerIndex,
x25DtePeerPEncIndex }
::= { x25DtePeerPEncTable 1 }
X25DtePeerPEncEntry ::= SEQUENCE {
x25DtePeerPEncIndex
Integer32,
x25DtePeerPEncValue
INTEGER,
x25DtePeerPEncRowStatus
RowStatus }
x25DtePeerPEncIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DtePeerPEncTable."
::= { x25DtePeerPEncEntry 1 }
x25DtePeerPEncValue OBJECT-TYPE
SYNTAX INTEGER {
ip(204) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents an individual value for the
x25DtePeerPEncTable."
::= { x25DtePeerPEncEntry 2 }
x25DtePeerPEncRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the x25DtePeerPEncTable."
::= { x25DtePeerPEncEntry 3 }
x25DtePeerLcnTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePeerLcnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute specifies the local logical channel numbers (Lcn) in
use for the X.25 calls to the remote host identified by this Peer
component."
::= { x25DtePeer 209 }
x25DtePeerLcnEntry OBJECT-TYPE
SYNTAX X25DtePeerLcnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePeerLcnTable."
INDEX {
x25DteIndex,
x25DtePeerIndex,
x25DtePeerLcnValue }
::= { x25DtePeerLcnTable 1 }
X25DtePeerLcnEntry ::= SEQUENCE {
x25DtePeerLcnValue
Integer32 }
x25DtePeerLcnValue OBJECT-TYPE
SYNTAX Integer32 (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
x25DtePeerLcnTable."
::= { x25DtePeerLcnEntry 1 }
x25DtePLcn OBJECT IDENTIFIER ::= { x25Dte 3 }
x25DtePLcnRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePLcnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25DtePLcn components."
::= { x25DtePLcn 1 }
x25DtePLcnRowStatusEntry OBJECT-TYPE
SYNTAX X25DtePLcnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DtePLcn component."
INDEX {
x25DteIndex,
x25DtePLcnIndex }
::= { x25DtePLcnRowStatusTable 1 }
X25DtePLcnRowStatusEntry ::= SEQUENCE {
x25DtePLcnRowStatus
RowStatus,
x25DtePLcnComponentName
DisplayString,
x25DtePLcnStorageType
StorageType,
x25DtePLcnIndex
Integer32 }
x25DtePLcnRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DtePLcn components.
These components can be added and deleted."
::= { x25DtePLcnRowStatusEntry 1 }
x25DtePLcnComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DtePLcnRowStatusEntry 2 }
x25DtePLcnStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DtePLcn tables."
::= { x25DtePLcnRowStatusEntry 4 }
x25DtePLcnIndex OBJECT-TYPE
SYNTAX Integer32 (1..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DtePLcn tables."
::= { x25DtePLcnRowStatusEntry 10 }
x25DtePLcnProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePLcnProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable parameters for the permanent
logical channels (PLcns) on the X.25 interface (corresponding to
Permanent Virtual Circuits (PVCs) provisioned on the Wide Area
Network)."
::= { x25DtePLcn 10 }
x25DtePLcnProvEntry OBJECT-TYPE
SYNTAX X25DtePLcnProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePLcnProvTable."
INDEX {
x25DteIndex,
x25DtePLcnIndex }
::= { x25DtePLcnProvTable 1 }
X25DtePLcnProvEntry ::= SEQUENCE {
x25DtePLcnEncAddressType
INTEGER,
x25DtePLcnEncAddress
AsciiString,
x25DtePLcnProtocolEncType
INTEGER,
x25DtePLcnLinkToRemoteGroup
Link,
x25DtePLcnInPacketSize
Unsigned32,
x25DtePLcnOutPacketSize
Unsigned32,
x25DtePLcnInWindowSize
Unsigned32,
x25DtePLcnOutWindowSize
Unsigned32 }
x25DtePLcnEncAddressType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ip(204) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the encapsulation type for the address of the
remote host with which this Peer component allows
communication."
DEFVAL { ip }
::= { x25DtePLcnProvEntry 1 }
x25DtePLcnEncAddress OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..128))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the encapsulation address of the remote host
with which this PermLcn component defines a connection"
::= { x25DtePLcnProvEntry 2 }
x25DtePLcnProtocolEncType OBJECT-TYPE
SYNTAX INTEGER {
null(0),
ip(204),
nscNull(257) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the encapsulation method to use when
exchanging protocol data units (PDUs) over this channel. IP and
Null protocolEncTypes are as defined in RFC1356.
NscNull is an encapsulation method for carrying IP datagrams
which requires removing 3 padding octets of zeroes and the
protocol identifier H.CC from the front of each data packet received
from the link in order to obtain the PDU. PDUs sent to the link are
propounded by a the protocol identifier H.CC. NscNull should only
be set when the remote host is following this same encapsulation
method."
DEFVAL { ip }
::= { x25DtePLcnProvEntry 3 }
x25DtePLcnLinkToRemoteGroup OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the link to the RemoteGroup, indicating the
RemoteGroup component with which this PermLcn component is
associated. The RemoteGroup components logically divide up the
X.25 Interface such that a number of Protocol Ports (and
consequently a number of Virtual Routers) may share the same
X.25 Interface into a Wide Area Network. In particular, the remote
host identified by this PermLcn component is designated as
belonging to the RemoteGroup linked by this attribute. The set of all
PermLcn and Peer components which link to a given RemoteGroup
determine the subset of remote hosts which are accessible to a
particular Protocol Port (and ultimately a Virtual Router)."
::= { x25DtePLcnProvEntry 4 }
x25DtePLcnInPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum receive packet size in octets."
DEFVAL { 128 }
::= { x25DtePLcnProvEntry 5 }
x25DtePLcnOutPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum transmit packet size in octets."
DEFVAL { 128 }
::= { x25DtePLcnProvEntry 6 }
x25DtePLcnInWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum receive window size. A
inWindowSize greater than 7 is only valid when the
packetSequencing attribute of the X25Dte component is set to
modulo128."
DEFVAL { 2 }
::= { x25DtePLcnProvEntry 7 }
x25DtePLcnOutWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum transmit window size. A
outWindowSize greater than 7 is only valid when the
packetSequencing attribute of the X25Dte component is set to
modulo128."
DEFVAL { 2 }
::= { x25DtePLcnProvEntry 8 }
x25DteLcn OBJECT IDENTIFIER ::= { x25Dte 4 }
x25DteLcnRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLcnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
x25DteLcn components."
::= { x25DteLcn 1 }
x25DteLcnRowStatusEntry OBJECT-TYPE
SYNTAX X25DteLcnRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DteLcn component."
INDEX {
x25DteIndex,
x25DteLcnIndex }
::= { x25DteLcnRowStatusTable 1 }
X25DteLcnRowStatusEntry ::= SEQUENCE {
x25DteLcnRowStatus
RowStatus,
x25DteLcnComponentName
DisplayString,
x25DteLcnStorageType
StorageType,
x25DteLcnIndex
Integer32 }
x25DteLcnRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DteLcn components.
These components cannot be added nor deleted."
::= { x25DteLcnRowStatusEntry 1 }
x25DteLcnComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DteLcnRowStatusEntry 2 }
x25DteLcnStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DteLcn tables."
::= { x25DteLcnRowStatusEntry 4 }
x25DteLcnIndex OBJECT-TYPE
SYNTAX Integer32 (1..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DteLcn tables."
::= { x25DteLcnRowStatusEntry 10 }
x25DteLcnStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLcnStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { x25DteLcn 10 }
x25DteLcnStateEntry OBJECT-TYPE
SYNTAX X25DteLcnStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLcnStateTable."
INDEX {
x25DteIndex,
x25DteLcnIndex }
::= { x25DteLcnStateTable 1 }
X25DteLcnStateEntry ::= SEQUENCE {
x25DteLcnAdminState
INTEGER,
x25DteLcnOperationalState
INTEGER,
x25DteLcnUsageState
INTEGER }
x25DteLcnAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { x25DteLcnStateEntry 1 }
x25DteLcnOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { x25DteLcnStateEntry 2 }
x25DteLcnUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { x25DteLcnStateEntry 3 }
x25DteLcnCpTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLcnCpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the call parameters that are in use for this
logical channel. For a PVC only the packet size and the window
size attributes are meaningful."
::= { x25DteLcn 11 }
x25DteLcnCpEntry OBJECT-TYPE
SYNTAX X25DteLcnCpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLcnCpTable."
INDEX {
x25DteIndex,
x25DteLcnIndex }
::= { x25DteLcnCpTable 1 }
X25DteLcnCpEntry ::= SEQUENCE {
x25DteLcnInPacketSize
Unsigned32,
x25DteLcnOutPacketSize
Unsigned32,
x25DteLcnInWindowSize
Unsigned32,
x25DteLcnOutWindowSize
Unsigned32,
x25DteLcnProposeReverseCharging
INTEGER,
x25DteLcnFastSelect
INTEGER,
x25DteLcnOutThroughputClassSize
INTEGER,
x25DteLcnInThroughputClassSize
INTEGER,
x25DteLcnCugIndex
AsciiString,
x25DteLcnCugoaIndex
AsciiString,
x25DteLcnNetworkUserIdentifier
HexString,
x25DteLcnChargingInformation
INTEGER,
x25DteLcnRpoa
AsciiString,
x25DteLcnTrnstDlySlctnAInd
Unsigned32,
x25DteLcnCallingNetworkFax
HexString,
x25DteLcnCalledNetworkFax
HexString,
x25DteLcnCallUserData
HexString }
x25DteLcnInPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum receive packet size in octets."
::= { x25DteLcnCpEntry 1 }
x25DteLcnOutPacketSize OBJECT-TYPE
SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the maximum transmit packet size in octets."
::= { x25DteLcnCpEntry 2 }
x25DteLcnInWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the receive window size."
::= { x25DteLcnCpEntry 3 }
x25DteLcnOutWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the transmit window size."
::= { x25DteLcnCpEntry 4 }
x25DteLcnProposeReverseCharging OBJECT-TYPE
SYNTAX INTEGER {
reverse(2),
local(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies whether local/reverse charging was negotiated for this
logical channel. To determine which end of the channel is paying
for the call, this attribute must be examined in combination with the
callDirection attribute. For example, if this attribute is set to reverse
and the callDirection attribute indicates incoming, it means the
incoming call signalled reverse charging, so the local end of the
channel is being charged. On the other, if the value of this attribute
is reverse and the callDirection is outgoing, it means that the call
request sent to the link signalled reverse charging; so the remote end
is charged. Similarly, a value of local must also be interpreted in
combination with the callDirection to determine which end is being
charged. If the value of the callDirection attribute is plcn, the
proposeReverseCharging attribute is meaningless."
DEFVAL { local }
::= { x25DteLcnCpEntry 5 }
x25DteLcnFastSelect OBJECT-TYPE
SYNTAX INTEGER {
unrestricted(3),
restricted(4),
no(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether the fast select was used in
establishing this logical channel."
DEFVAL { no }
::= { x25DteLcnCpEntry 6 }
x25DteLcnOutThroughputClassSize OBJECT-TYPE
SYNTAX INTEGER {
n75(3),
n150(4),
n300(5),
n600(6),
n1200(7),
n2400(8),
n4800(9),
n9600(10),
n19200(11),
n48000(12),
n64000(13),
notSpecified(17) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the transmit throughput class."
DEFVAL { notSpecified }
::= { x25DteLcnCpEntry 7 }
x25DteLcnInThroughputClassSize OBJECT-TYPE
SYNTAX INTEGER {
n75(3),
n150(4),
n300(5),
n600(6),
n1200(7),
n2400(8),
n4800(9),
n9600(10),
n19200(11),
n48000(12),
n64000(13),
notSpecified(17) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the receive throughput class."
DEFVAL { notSpecified }
::= { x25DteLcnCpEntry 8 }
x25DteLcnCugIndex OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the index of the Closed User Group facility
used in establishing this logical channel."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 9 }
x25DteLcnCugoaIndex OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..4))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the index of the Closed User Group with
Outgoing Access facility used in establishing this logical channel."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 10 }
x25DteLcnNetworkUserIdentifier OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Specifies the Network User Identifier used for this logical channel."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 11 }
x25DteLcnChargingInformation OBJECT-TYPE
SYNTAX INTEGER {
notSpecified(2),
notRequested(3),
requested(4) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates whether or not the charging information
facility was used in establishing this logical channel. A value of
notSpecified means the facility was not signalled. A value of
notRequested means the facility was signalled but charging
information was not requested (that is, the charging info field of the
facility was set Off). A value of requested means the facility was
signalled to explicitly request charging information.
DESCRIPTION"
DEFVAL { notSpecified }
::= { x25DteLcnCpEntry 12 }
x25DteLcnRpoa OBJECT-TYPE
SYNTAX AsciiString (SIZE (0..108))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the RPOA facility which was signalled in
establishing this logical channel."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 13 }
x25DteLcnTrnstDlySlctnAInd OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Transit Delay Selection and Indication
value used for this logical channel. A value of 65536 means no
facility was signalled."
DEFVAL { 65536 }
::= { x25DteLcnCpEntry 14 }
x25DteLcnCallingNetworkFax OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the Calling Network facilities which were
signalled in the call packet. A value of null (empty string) means no
calling network facilities were signalled."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 23 }
x25DteLcnCalledNetworkFax OBJECT-TYPE
SYNTAX HexString (SIZE (0..108))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the called network facilities which were
signalled in the call packet. A value of null (empty string) means no
called network facilities were signalled."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 24 }
x25DteLcnCallUserData OBJECT-TYPE
SYNTAX HexString (SIZE (0..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the user data which was signalled in the call
packet. A value of null (empty string) means no user data was
signalled."
DEFVAL { ''H }
::= { x25DteLcnCpEntry 25 }
x25DteLcnLcnStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLcnLcnStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the status for an X.25 Logical Channel."
::= { x25DteLcn 12 }
x25DteLcnLcnStatusEntry OBJECT-TYPE
SYNTAX X25DteLcnLcnStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLcnLcnStatusTable."
INDEX {
x25DteIndex,
x25DteLcnIndex }
::= { x25DteLcnLcnStatusTable 1 }
X25DteLcnLcnStatusEntry ::= SEQUENCE {
x25DteLcnStatus
INTEGER,
x25DteLcnCallDirection
INTEGER,
x25DteLcnCalledAddress
DigitString,
x25DteLcnCallingAddress
DigitString,
x25DteLcnOriginalCalledAddress
DigitString }
x25DteLcnStatus OBJECT-TYPE
SYNTAX INTEGER {
closed(2),
calling(3),
dataTransfer(4),
clearing(5),
resetting(7) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the current state of the logical channel."
::= { x25DteLcnLcnStatusEntry 1 }
x25DteLcnCallDirection OBJECT-TYPE
SYNTAX INTEGER {
incoming(1),
outgoing(2),
permanentLcn(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the direction of the call that caused the
establishment of this channel."
::= { x25DteLcnLcnStatusEntry 3 }
x25DteLcnCalledAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the called X.25 address to which the call is
established."
::= { x25DteLcnLcnStatusEntry 4 }
x25DteLcnCallingAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the calling X.25 address from which the call
originated"
::= { x25DteLcnLcnStatusEntry 5 }
x25DteLcnOriginalCalledAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the X.25 address of the originally called
DTE to which the call was attempted. This could be different from
the value of the calledAddress attribute in the case where the
original call was redirected."
::= { x25DteLcnLcnStatusEntry 6 }
x25DteLcnStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLcnStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group contains the operational statistics for an X.25 Logical
Channel."
::= { x25DteLcn 13 }
x25DteLcnStatsEntry OBJECT-TYPE
SYNTAX X25DteLcnStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLcnStatsTable."
INDEX {
x25DteIndex,
x25DteLcnIndex }
::= { x25DteLcnStatsTable 1 }
X25DteLcnStatsEntry ::= SEQUENCE {
x25DteLcnInUknownProtocols
Counter32,
x25DteLcnInDataOctets
Counter32,
x25DteLcnInDataPackets
Counter32,
x25DteLcnInRmtInitiatedRsts
Counter32,
x25DteLcnInPrvdrInitiatedRsts
Counter32,
x25DteLcnInInterruptPackets
Counter32,
x25DteLcnOutDataOctets
Counter32,
x25DteLcnOutDataPackets
Counter32,
x25DteLcnOutInterruptPackets
Counter32,
x25DteLcnT22ResetTimeouts
Counter32 }
x25DteLcnInUknownProtocols OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number packets received from link which
were discareded because of an unkown or unsupported protocols."
::= { x25DteLcnStatsEntry 1 }
x25DteLcnInDataOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of octets of user data received from
the link."
::= { x25DteLcnStatsEntry 2 }
x25DteLcnInDataPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of data packets received from the
link."
::= { x25DteLcnStatsEntry 3 }
x25DteLcnInRmtInitiatedRsts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of reset packets, with a cause code
of 'DTE initiated', which were received from the link"
::= { x25DteLcnStatsEntry 4 }
x25DteLcnInPrvdrInitiatedRsts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of reset packets, with a cause code
other than 'DTE initiated', which were received from the link."
::= { x25DteLcnStatsEntry 5 }
x25DteLcnInInterruptPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of interrupt packets received from
the link."
::= { x25DteLcnStatsEntry 6 }
x25DteLcnOutDataOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of octets of user data sent to the
link."
::= { x25DteLcnStatsEntry 7 }
x25DteLcnOutDataPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of data packets sent to link."
::= { x25DteLcnStatsEntry 8 }
x25DteLcnOutInterruptPackets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of interrupt packets sent to link."
::= { x25DteLcnStatsEntry 9 }
x25DteLcnT22ResetTimeouts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the t22 reset timer has
expired."
::= { x25DteLcnStatsEntry 10 }
x25DteLapb OBJECT IDENTIFIER ::= { x25Dte 5 }
x25DteLapbRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25DteLapb components."
::= { x25DteLapb 1 }
x25DteLapbRowStatusEntry OBJECT-TYPE
SYNTAX X25DteLapbRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DteLapb component."
INDEX {
x25DteIndex,
x25DteLapbIndex }
::= { x25DteLapbRowStatusTable 1 }
X25DteLapbRowStatusEntry ::= SEQUENCE {
x25DteLapbRowStatus
RowStatus,
x25DteLapbComponentName
DisplayString,
x25DteLapbStorageType
StorageType,
x25DteLapbIndex
NonReplicated }
x25DteLapbRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DteLapb components.
These components cannot be added nor deleted."
::= { x25DteLapbRowStatusEntry 1 }
x25DteLapbComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DteLapbRowStatusEntry 2 }
x25DteLapbStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DteLapb tables."
::= { x25DteLapbRowStatusEntry 4 }
x25DteLapbIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DteLapb tables."
::= { x25DteLapbRowStatusEntry 10 }
x25DteLapbCpTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbCpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"X25Dte/n Lapb
This group contains the set of configuration parameters for the
LAPB interface."
::= { x25DteLapb 10 }
x25DteLapbCpEntry OBJECT-TYPE
SYNTAX X25DteLapbCpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbCpTable."
INDEX {
x25DteIndex,
x25DteLapbIndex }
::= { x25DteLapbCpTable 1 }
X25DteLapbCpEntry ::= SEQUENCE {
x25DteLapbStationType
INTEGER,
x25DteLapbFrameSequencing
INTEGER,
x25DteLapbN1FrameSize
Unsigned32,
x25DteLapbKWindowSize
Unsigned32,
x25DteLapbN2TransmitLimit
Unsigned32,
x25DteLapbT1AckTimer
Unsigned32,
x25DteLapbT2AckDelayTimer
Unsigned32,
x25DteLapbT4IdleProbeTimer
Unsigned32,
x25DteLapbActionInitiate
INTEGER,
x25DteLapbActionRecvDM
INTEGER,
x25DteLapbTxQDegradeThreshold
Unsigned32,
x25DteLapbTxQResetThreshold
Unsigned32 }
x25DteLapbStationType OBJECT-TYPE
SYNTAX INTEGER {
dte(1),
dce(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the DCE or the DTE role of operation for the
LAPB interface. Changing this attribute will cause the lapb link to
Reset."
DEFVAL { dte }
::= { x25DteLapbCpEntry 1 }
x25DteLapbFrameSequencing OBJECT-TYPE
SYNTAX INTEGER {
modulo8(1),
modulo128(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the modulo of the frame sequence
numbering of the LAPB interface. Changing this attribute will cause
the lapb link to Reset."
DEFVAL { modulo8 }
::= { x25DteLapbCpEntry 2 }
x25DteLapbN1FrameSize OBJECT-TYPE
SYNTAX Unsigned32 (40..32856)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum frame size in bits that can be
transmitted or received. This value must be greater than or equal to
the maximum packet size across the interface(in bits)+ max level 3
header size(in bits)+ max level 2 header size(in bits)+ crc in bits.
(max Pkt size + -------------> 4096*8
max level 3 header size + ---> 4*8
level 2 header size + --------> 5*8
crc -------------------> 2*8)"
DEFVAL { 32856 }
::= { x25DteLapbCpEntry 3 }
x25DteLapbKWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the window size. This is the maximum
number of unacknowledged sequenced frames that may be
outstanding from or to this interface at any one time. A window size
of greater than 7 is only valid when the sequence numbering of
frames is modulo 128."
DEFVAL { 7 }
::= { x25DteLapbCpEntry 4 }
x25DteLapbN2TransmitLimit OBJECT-TYPE
SYNTAX Unsigned32 (1..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum number of times a frame can
be transmitted before appropriate recovery action is taken."
DEFVAL { 10 }
::= { x25DteLapbCpEntry 5 }
x25DteLapbT1AckTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..10000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the period in milliseconds within which an
acknowledgment of a sent frame must be received. The value set for
t1 ack timer must be less than the value set for the t4 idle probe
timer."
DEFVAL { 3000 }
::= { x25DteLapbCpEntry 6 }
x25DteLapbT2AckDelayTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..10000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the maximum period in milliseconds
permissible to wait before sending an acknowledgment for a
received in sequenced I-frame. A value of 0 means there will be no
delay in acknowledgment."
DEFVAL { 0 }
::= { x25DteLapbCpEntry 7 }
x25DteLapbT4IdleProbeTimer OBJECT-TYPE
SYNTAX Unsigned32 (1000..65535000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the time period in milliseconds the link will
be permitted to remain idle (that is, no frames are exchanged on the
data link). Upon expiry of this timer, LAPB will poll its peer for
status. The value set for t4 idle probe timer must be greater than the
value set for the t1 ack timer."
DEFVAL { 60000 }
::= { x25DteLapbCpEntry 8 }
x25DteLapbActionInitiate OBJECT-TYPE
SYNTAX INTEGER {
sendSABM(1),
sendDM(3),
none(4) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the action to be taken by the LAPB interface
to initiate link setup."
DEFVAL { sendSABM }
::= { x25DteLapbCpEntry 9 }
x25DteLapbActionRecvDM OBJECT-TYPE
SYNTAX INTEGER {
sendSABM(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the action to be taken by the LAPB interface
when it receives a DM response."
DEFVAL { sendSABM }
::= { x25DteLapbCpEntry 10 }
x25DteLapbTxQDegradeThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..65536)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the threshold of the number of higher layer
packets queued, beyond which LAPB should initiate a service
degrade alarm. A value of 65536 means no threshold."
DEFVAL { 65536 }
::= { x25DteLapbCpEntry 11 }
x25DteLapbTxQResetThreshold OBJECT-TYPE
SYNTAX Unsigned32 (1..65536)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the threshold of the number of higher layer
packets queued, beyond which LAPB should initiate an overload
alarm and reset the link. A value of 65536 means no threshold."
DEFVAL { 65536 }
::= { x25DteLapbCpEntry 12 }
x25DteLapbStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { x25DteLapb 11 }
x25DteLapbStateEntry OBJECT-TYPE
SYNTAX X25DteLapbStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbStateTable."
INDEX {
x25DteIndex,
x25DteLapbIndex }
::= { x25DteLapbStateTable 1 }
X25DteLapbStateEntry ::= SEQUENCE {
x25DteLapbAdminState
INTEGER,
x25DteLapbOperationalState
INTEGER,
x25DteLapbUsageState
INTEGER }
x25DteLapbAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { x25DteLapbStateEntry 1 }
x25DteLapbOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { x25DteLapbStateEntry 2 }
x25DteLapbUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { x25DteLapbStateEntry 3 }
x25DteLapbStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the status for the LAPB interface."
::= { x25DteLapb 12 }
x25DteLapbStatusEntry OBJECT-TYPE
SYNTAX X25DteLapbStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbStatusTable."
INDEX {
x25DteIndex,
x25DteLapbIndex }
::= { x25DteLapbStatusTable 1 }
X25DteLapbStatusEntry ::= SEQUENCE {
x25DteLapbCurrentState
INTEGER,
x25DteLapbLastStateChangeReason
INTEGER,
x25DteLapbFrmrTransmit
HexString,
x25DteLapbFrmrReceive
HexString,
x25DteLapbCurrentQueueSize
Unsigned32 }
x25DteLapbCurrentState OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
linkSetup(2),
frameReject(3),
disconnectRequest(4),
informationTransfer(5),
waitingAck(7) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the current state of the LAPB interface."
::= { x25DteLapbStatusEntry 1 }
x25DteLapbLastStateChangeReason OBJECT-TYPE
SYNTAX INTEGER {
notStarted(1),
abmEntered(2),
abmeEntered(3),
abmReset(4),
abmeReset(5),
dmReceived(6),
dmSent(7),
discReceived(8),
discSent(9),
frmrReceived(10),
frmrSent(11),
n2TimeOut(12),
other(13) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the reason for the most recent state change."
::= { x25DteLapbStatusEntry 2 }
x25DteLapbFrmrTransmit OBJECT-TYPE
SYNTAX HexString (SIZE (0..7))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the Information field of the FRMR most
recently sent."
DEFVAL { ''H }
::= { x25DteLapbStatusEntry 3 }
x25DteLapbFrmrReceive OBJECT-TYPE
SYNTAX HexString (SIZE (0..7))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the Information field of the FRMR most
recently received."
DEFVAL { ''H }
::= { x25DteLapbStatusEntry 4 }
x25DteLapbCurrentQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the number of packets on the lapb transmit
queue."
::= { x25DteLapbStatusEntry 5 }
x25DteLapbStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the statistics for the LAPB interface."
::= { x25DteLapb 13 }
x25DteLapbStatsEntry OBJECT-TYPE
SYNTAX X25DteLapbStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbStatsTable."
INDEX {
x25DteIndex,
x25DteLapbIndex }
::= { x25DteLapbStatsTable 1 }
X25DteLapbStatsEntry ::= SEQUENCE {
x25DteLapbStateChanges
Counter32,
x25DteLapbRemoteBusy
Counter32,
x25DteLapbTransmitRejectFrames
Counter32,
x25DteLapbReceiveRejectFrames
Counter32,
x25DteLapbT1AckTimeout
Counter32 }
x25DteLapbStateChanges OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times LAPB state has changed.
Refer to the attribute 'linkState' for the set of possible states."
::= { x25DteLapbStatsEntry 1 }
x25DteLapbRemoteBusy OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times transmission of an I-frame
was un-successful due to a perceived remote busy condition
(window closed or remote busy)."
::= { x25DteLapbStatsEntry 2 }
x25DteLapbTransmitRejectFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of REJ frames sent by the
interface."
::= { x25DteLapbStatsEntry 3 }
x25DteLapbReceiveRejectFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of REJ frames received by the
interface."
::= { x25DteLapbStatsEntry 4 }
x25DteLapbT1AckTimeout OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of times the T1 timer has expired."
::= { x25DteLapbStatsEntry 5 }
x25DteLapbFramer OBJECT IDENTIFIER ::= { x25DteLapb 2 }
x25DteLapbFramerRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbFramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25DteLapbFramer components."
::= { x25DteLapbFramer 1 }
x25DteLapbFramerRowStatusEntry OBJECT-TYPE
SYNTAX X25DteLapbFramerRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DteLapbFramer component."
INDEX {
x25DteIndex,
x25DteLapbIndex,
x25DteLapbFramerIndex }
::= { x25DteLapbFramerRowStatusTable 1 }
X25DteLapbFramerRowStatusEntry ::= SEQUENCE {
x25DteLapbFramerRowStatus
RowStatus,
x25DteLapbFramerComponentName
DisplayString,
x25DteLapbFramerStorageType
StorageType,
x25DteLapbFramerIndex
NonReplicated }
x25DteLapbFramerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DteLapbFramer components.
These components cannot be added nor deleted."
::= { x25DteLapbFramerRowStatusEntry 1 }
x25DteLapbFramerComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DteLapbFramerRowStatusEntry 2 }
x25DteLapbFramerStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DteLapbFramer tables."
::= { x25DteLapbFramerRowStatusEntry 4 }
x25DteLapbFramerIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DteLapbFramer tables."
::= { x25DteLapbFramerRowStatusEntry 10 }
x25DteLapbFramerProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbFramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the base provisioning data for the Framer
component. Application or hardware interface specific provisioning
data is contained in other provisionable Framer groups."
::= { x25DteLapbFramer 10 }
x25DteLapbFramerProvEntry OBJECT-TYPE
SYNTAX X25DteLapbFramerProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbFramerProvTable."
INDEX {
x25DteIndex,
x25DteLapbIndex,
x25DteLapbFramerIndex }
::= { x25DteLapbFramerProvTable 1 }
X25DteLapbFramerProvEntry ::= SEQUENCE {
x25DteLapbFramerInterfaceName
Link }
x25DteLapbFramerInterfaceName OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains a hardware component name.
The attribute associates the application with a specific link. This
defines the module processor on which Framer's parent component
(as well as Framer itself) will run."
::= { x25DteLapbFramerProvEntry 1 }
x25DteLapbFramerLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbFramerLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains attributes defining the framing of data on the
link interface."
::= { x25DteLapbFramer 11 }
x25DteLapbFramerLinkEntry OBJECT-TYPE
SYNTAX X25DteLapbFramerLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbFramerLinkTable."
INDEX {
x25DteIndex,
x25DteLapbIndex,
x25DteLapbFramerIndex }
::= { x25DteLapbFramerLinkTable 1 }
X25DteLapbFramerLinkEntry ::= SEQUENCE {
x25DteLapbFramerFlagsBetweenFrames
Unsigned32 }
x25DteLapbFramerFlagsBetweenFrames OBJECT-TYPE
SYNTAX Unsigned32 (1..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute defines the number of flags that are inserted between
frames sent to the link interface."
DEFVAL { 1 }
::= { x25DteLapbFramerLinkEntry 4 }
x25DteLapbFramerStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbFramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { x25DteLapbFramer 12 }
x25DteLapbFramerStateEntry OBJECT-TYPE
SYNTAX X25DteLapbFramerStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbFramerStateTable."
INDEX {
x25DteIndex,
x25DteLapbIndex,
x25DteLapbFramerIndex }
::= { x25DteLapbFramerStateTable 1 }
X25DteLapbFramerStateEntry ::= SEQUENCE {
x25DteLapbFramerAdminState
INTEGER,
x25DteLapbFramerOperationalState
INTEGER,
x25DteLapbFramerUsageState
INTEGER }
x25DteLapbFramerAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { x25DteLapbFramerStateEntry 1 }
x25DteLapbFramerOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { x25DteLapbFramerStateEntry 2 }
x25DteLapbFramerUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { x25DteLapbFramerStateEntry 3 }
x25DteLapbFramerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbFramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the operational statistics data for a Framer
component."
::= { x25DteLapbFramer 13 }
x25DteLapbFramerStatsEntry OBJECT-TYPE
SYNTAX X25DteLapbFramerStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbFramerStatsTable."
INDEX {
x25DteIndex,
x25DteLapbIndex,
x25DteLapbFramerIndex }
::= { x25DteLapbFramerStatsTable 1 }
X25DteLapbFramerStatsEntry ::= SEQUENCE {
x25DteLapbFramerFrmToIf
Counter32,
x25DteLapbFramerFrmFromIf
Counter32,
x25DteLapbFramerOctetFromIf
Counter32,
x25DteLapbFramerAborts
Counter32,
x25DteLapbFramerCrcErrors
Counter32,
x25DteLapbFramerLrcErrors
Counter32,
x25DteLapbFramerNonOctetErrors
Counter32,
x25DteLapbFramerOverruns
Counter32,
x25DteLapbFramerUnderruns
Counter32 }
x25DteLapbFramerFrmToIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames transmitted to the link interface by Framer.
Note: This does not include the number of frames transmitted
directly to the hardware queue, thus bypassing the Framer
component."
::= { x25DteLapbFramerStatsEntry 1 }
x25DteLapbFramerFrmFromIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames received from the link interface by Framer."
::= { x25DteLapbFramerStatsEntry 2 }
x25DteLapbFramerOctetFromIf OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of bytes received from the link interface by Framer."
::= { x25DteLapbFramerStatsEntry 3 }
x25DteLapbFramerAborts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the total number of aborts received."
::= { x25DteLapbFramerStatsEntry 4 }
x25DteLapbFramerCrcErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the total number of frames with CRC errors,
occurring in the receive direction from the link."
::= { x25DteLapbFramerStatsEntry 5 }
x25DteLapbFramerLrcErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the total number of frames with LRC errors,
occurring in the Tx link prior to transmission onto the link."
::= { x25DteLapbFramerStatsEntry 6 }
x25DteLapbFramerNonOctetErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the total number of frames that were non octet
aligned."
::= { x25DteLapbFramerStatsEntry 7 }
x25DteLapbFramerOverruns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the total number of frames received from the link
for which overruns occurred."
::= { x25DteLapbFramerStatsEntry 8 }
x25DteLapbFramerUnderruns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the total number of frames transmitted to the link
for which underruns occurred."
::= { x25DteLapbFramerStatsEntry 9 }
x25DteLapbFramerUtilTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteLapbFramerUtilEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the link utilizaiton operational data for a
Framer component."
::= { x25DteLapbFramer 14 }
x25DteLapbFramerUtilEntry OBJECT-TYPE
SYNTAX X25DteLapbFramerUtilEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteLapbFramerUtilTable."
INDEX {
x25DteIndex,
x25DteLapbIndex,
x25DteLapbFramerIndex }
::= { x25DteLapbFramerUtilTable 1 }
X25DteLapbFramerUtilEntry ::= SEQUENCE {
x25DteLapbFramerNormPrioLinkUtilToIf
Gauge32,
x25DteLapbFramerNormPrioLinkUtilFromIf
Gauge32 }
x25DteLapbFramerNormPrioLinkUtilToIf OBJECT-TYPE
SYNTAX Gauge32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) sent to the link as a percentage of the
available bandwidth on the link. Note that this includes traffic with
Transfer Priorities of 0, 6 and 9 and/or Emission Priority of 2 and 3.
The utilization is the average for the last minute."
DEFVAL { 0 }
::= { x25DteLapbFramerUtilEntry 1 }
x25DteLapbFramerNormPrioLinkUtilFromIf OBJECT-TYPE
SYNTAX Gauge32 (0..100)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the utilization of the normal and high priority data
traffic (interruptable traffic) received from the link as a percentage
of the available bandwidth on the link. Note that this includes traffic
with Transfer Priorities (TP) of 0, 6 or 9 and/or Emission Priority of
2 and 3. The utilization is the average for the last minute."
DEFVAL { 0 }
::= { x25DteLapbFramerUtilEntry 3 }
x25DtePle OBJECT IDENTIFIER ::= { x25Dte 6 }
x25DtePleRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePleRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25DtePle components."
::= { x25DtePle 1 }
x25DtePleRowStatusEntry OBJECT-TYPE
SYNTAX X25DtePleRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DtePle component."
INDEX {
x25DteIndex,
x25DtePleIndex }
::= { x25DtePleRowStatusTable 1 }
X25DtePleRowStatusEntry ::= SEQUENCE {
x25DtePleRowStatus
RowStatus,
x25DtePleComponentName
DisplayString,
x25DtePleStorageType
StorageType,
x25DtePleIndex
NonReplicated }
x25DtePleRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DtePle components.
These components cannot be added nor deleted."
::= { x25DtePleRowStatusEntry 1 }
x25DtePleComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DtePleRowStatusEntry 2 }
x25DtePleStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DtePle tables."
::= { x25DtePleRowStatusEntry 4 }
x25DtePleIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DtePle tables."
::= { x25DtePleRowStatusEntry 10 }
x25DtePleProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePleProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes relevant to an
interface used to carry Multiprotocol Interconnect traffic over X.25."
::= { x25DtePle 10 }
x25DtePleProvEntry OBJECT-TYPE
SYNTAX X25DtePleProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePleProvTable."
INDEX {
x25DteIndex,
x25DtePleIndex }
::= { x25DtePleProvTable 1 }
X25DtePleProvEntry ::= SEQUENCE {
x25DtePleInactivityTimer
Unsigned32 }
x25DtePleInactivityTimer OBJECT-TYPE
SYNTAX Unsigned32 (0..65536000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the period in milliseconds this interface will
keep an idle connection open before closing it."
DEFVAL { 180000 }
::= { x25DtePleProvEntry 1 }
x25DtePleOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DtePleOpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the Operational attributes relevant to an
interface used to carry Multiprotocol Interconnect traffic over X.25."
::= { x25DtePle 11 }
x25DtePleOpEntry OBJECT-TYPE
SYNTAX X25DtePleOpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DtePleOpTable."
INDEX {
x25DteIndex,
x25DtePleIndex }
::= { x25DtePleOpTable 1 }
X25DtePleOpEntry ::= SEQUENCE {
x25DtePleEncAddrToX25LkupFlrs
Unsigned32,
x25DtePleLastFailedEncAddr
HexString,
x25DtePleX25AddrToEncLkupFlrs
Unsigned32,
x25DtePleLastFailedX25Addr
DigitString }
x25DtePleEncAddrToX25LkupFlrs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of times a translation attempt
from an Encapsulation address to an X.25 address failed to find a
corresponding X.25 address. Such a failure could occur when a
Protocol Port, linked to a RemoteGroup via the linkToProtocolPort
attribute of the RemoteGroup, requests through the software that a
X.25 call be established to a particular Encapsulation address. If the
RemoteGroup does not have a Peer component linked in its
linkToPeer attribute list, with the encAddress attribute equal to the
Encapsulation address specified, this counter will be incremented,
because the corresponding Peer component needed to establish an
X.25 connection was not found."
DEFVAL { 0 }
::= { x25DtePleOpEntry 1 }
x25DtePleLastFailedEncAddr OBJECT-TYPE
SYNTAX HexString (SIZE (2..128))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the last Encapsulation address for which no
corresponding X.25 address was found and thus caused
encAddressToX25LkupFlrs to be incremented."
::= { x25DtePleOpEntry 2 }
x25DtePleX25AddrToEncLkupFlrs OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the number of times a translation attempt
from an X.25 address to an Encapsulation address failed to find a
corresponding Encapsulation address. Such a failure could occur
when a incoming call received from the link by the X.25 DTE is
directed to a specific RemoteGroup because the called address
matches the localAddress attribute of the RemoteGroup component.
If the RemoteGroup component does not have a Peer component
linked in its linkToPeer attribute list, with the x25Address attribute
equal to the calling address from the incoming call packet, there is
no appropriate Peer component, so the call is cleared and this
counter is incremented."
DEFVAL { 0 }
::= { x25DtePleOpEntry 4 }
x25DtePleLastFailedX25Addr OBJECT-TYPE
SYNTAX DigitString (SIZE (0..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This field specifies the last X.25 address that caused
x25AddressToEncLkupFlrs to be incremented."
::= { x25DtePleOpEntry 5 }
x25DteRg OBJECT IDENTIFIER ::= { x25Dte 7 }
x25DteRgRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
x25DteRg components."
::= { x25DteRg 1 }
x25DteRgRowStatusEntry OBJECT-TYPE
SYNTAX X25DteRgRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
x25DteRg component."
INDEX {
x25DteIndex,
x25DteRgIndex }
::= { x25DteRgRowStatusTable 1 }
X25DteRgRowStatusEntry ::= SEQUENCE {
x25DteRgRowStatus
RowStatus,
x25DteRgComponentName
DisplayString,
x25DteRgStorageType
StorageType,
x25DteRgIndex
Integer32 }
x25DteRgRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
x25DteRg components.
These components can be added and deleted."
::= { x25DteRgRowStatusEntry 1 }
x25DteRgComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { x25DteRgRowStatusEntry 2 }
x25DteRgStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
x25DteRg tables."
::= { x25DteRgRowStatusEntry 4 }
x25DteRgIndex OBJECT-TYPE
SYNTAX Integer32 (1..1023)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the x25DteRg tables."
::= { x25DteRgRowStatusEntry 10 }
x25DteRgIfEntryTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgIfEntryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes for the ifEntry."
::= { x25DteRg 10 }
x25DteRgIfEntryEntry OBJECT-TYPE
SYNTAX X25DteRgIfEntryEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgIfEntryTable."
INDEX {
x25DteIndex,
x25DteRgIndex }
::= { x25DteRgIfEntryTable 1 }
X25DteRgIfEntryEntry ::= SEQUENCE {
x25DteRgIfAdminStatus
INTEGER,
x25DteRgIfIndex
InterfaceIndex }
x25DteRgIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of the interface. The up state indicates the
interface is operational. The down state indicates the interface is not
operational. The testing state indicates that no operational packets
can be passed."
DEFVAL { up }
::= { x25DteRgIfEntryEntry 1 }
x25DteRgIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the index for the IfEntry. Its value is automatically initialized
during the provisioning process."
::= { x25DteRgIfEntryEntry 2 }
x25DteRgProvTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the provisionable attributes of the
RemoteGroup component."
::= { x25DteRg 11 }
x25DteRgProvEntry OBJECT-TYPE
SYNTAX X25DteRgProvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgProvTable."
INDEX {
x25DteIndex,
x25DteRgIndex }
::= { x25DteRgProvTable 1 }
X25DteRgProvEntry ::= SEQUENCE {
x25DteRgLinkToProtocolPort
Link,
x25DteRgLocalAddress
DigitString,
x25DteRgMtuSize
Unsigned32 }
x25DteRgLinkToProtocolPort OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains a protocol port component name. The
attribute associates the application with a protocol port."
::= { x25DteRgProvEntry 1 }
x25DteRgLocalAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains the unique X.25 address which identifies this
RemoteGroup. It should correspond to the called address in X.25
incoming call packets which are to be directed to this
RemoteGroup. This allows calls received from the link to be
directed to the appropriate RemoteGroup based on the called
address in the X.25 call packet. The RemoteGroup components
allow the X.25 interface to be shared amongst a number of Protocol
Ports (and ultimately Virtual Routers) because each RemoteGroup
is coupled with a specific ProtocolPort through its
linkToProtocolPort attribute."
::= { x25DteRgProvEntry 2 }
x25DteRgMtuSize OBJECT-TYPE
SYNTAX Unsigned32 (576..9188)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Maximum Transmit Unit (MTU); that is,
the size of the largest datagram (in octets) which can be sent/
received on the interface."
DEFVAL { 1600 }
::= { x25DteRgProvEntry 3 }
x25DteRgStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains the three OSI State attributes. The descriptions
generically indicate what each state attribute implies about the
component. Note that not all the values and state combinations
described here are supported by every component which uses this
group. For component-specific information and the valid state
combinations, refer to NTP 241-7001-150, Passport Operations and
Maintenance Guide."
::= { x25DteRg 12 }
x25DteRgStateEntry OBJECT-TYPE
SYNTAX X25DteRgStateEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgStateTable."
INDEX {
x25DteIndex,
x25DteRgIndex }
::= { x25DteRgStateTable 1 }
X25DteRgStateEntry ::= SEQUENCE {
x25DteRgAdminState
INTEGER,
x25DteRgOperationalState
INTEGER,
x25DteRgUsageState
INTEGER }
x25DteRgAdminState OBJECT-TYPE
SYNTAX INTEGER {
locked(0),
unlocked(1),
shuttingDown(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Administrative State of the
component.
The value locked indicates that the component is administratively
prohibited from providing services for its users. A Lock or Lock -
force command has been previously issued for this component.
When the value is locked, the value of usageState must be idle.
The value shuttingDown indicates that the component is
administratively permitted to provide service to its existing users
only. A Lock command was issued against the component and it is
in the process of shutting down.
The value unlocked indicates that the component is administratively
permitted to provide services for its users. To enter this state, issue
an Unlock command to this component."
DEFVAL { unlocked }
::= { x25DteRgStateEntry 1 }
x25DteRgOperationalState OBJECT-TYPE
SYNTAX INTEGER {
disabled(0),
enabled(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Operational State of the component.
The value enabled indicates that the component is available for
operation. Note that if adminState is locked, it would still not be
providing service.
The value disabled indicates that the component is not available for
operation. For example, something is wrong with the component
itself, or with another component on which this one depends. If the
value is disabled, the usageState must be idle."
DEFVAL { disabled }
::= { x25DteRgStateEntry 2 }
x25DteRgUsageState OBJECT-TYPE
SYNTAX INTEGER {
idle(0),
active(1),
busy(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the OSI Usage State of the component.
The value idle indicates that the component is not currently in use.
The value active indicates that the component is in use and has
spare capacity to provide for additional users.
The value busy indicates that the component is in use and has no
spare operating capacity for additional users at this time."
DEFVAL { idle }
::= { x25DteRgStateEntry 3 }
x25DteRgOperStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group includes the Operational Status attribute. This attribute
defines the current operational state of this component."
::= { x25DteRg 13 }
x25DteRgOperStatusEntry OBJECT-TYPE
SYNTAX X25DteRgOperStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgOperStatusTable."
INDEX {
x25DteIndex,
x25DteRgIndex }
::= { x25DteRgOperStatusTable 1 }
X25DteRgOperStatusEntry ::= SEQUENCE {
x25DteRgSnmpOperStatus
INTEGER }
x25DteRgSnmpOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
testing(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the interface. The up state indicates the
interface is operational and capable of forwarding packets. The
down state indicates the interface is not operational, thus unable to
forward packets. testing state indicates that no operational packets
can be passed."
DEFVAL { up }
::= { x25DteRgOperStatusEntry 1 }
x25DteRgLTPlcnTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgLTPlcnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute is a list of links to PermLcn components. The set of
all Peer and PermLcn components which link to a given
RemoteGroup determine the subset of remote hosts which are
accessible to a particular Protocol Port (and ultimately a Virtual
Router)."
::= { x25DteRg 210 }
x25DteRgLTPlcnEntry OBJECT-TYPE
SYNTAX X25DteRgLTPlcnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgLTPlcnTable."
INDEX {
x25DteIndex,
x25DteRgIndex,
x25DteRgLTPlcnValue }
::= { x25DteRgLTPlcnTable 1 }
X25DteRgLTPlcnEntry ::= SEQUENCE {
x25DteRgLTPlcnValue
Link,
x25DteRgLTPlcnRowStatus
RowStatus }
x25DteRgLTPlcnValue OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
x25DteRgLTPlcnTable."
::= { x25DteRgLTPlcnEntry 1 }
x25DteRgLTPlcnRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the x25DteRgLTPlcnTable."
::= { x25DteRgLTPlcnEntry 2 }
x25DteRgLtPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgLtPeerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute gives a list of links to Peer components. The set of all
Peer and PermLcn components which link to a given RemoteGroup
determine the subset of remote hosts which are accessible to a
particular Protocol Port (and ultimately a Virtual Router)."
::= { x25DteRg 211 }
x25DteRgLtPeerEntry OBJECT-TYPE
SYNTAX X25DteRgLtPeerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgLtPeerTable."
INDEX {
x25DteIndex,
x25DteRgIndex,
x25DteRgLtPeerValue }
::= { x25DteRgLtPeerTable 1 }
X25DteRgLtPeerEntry ::= SEQUENCE {
x25DteRgLtPeerValue
Link,
x25DteRgLtPeerRowStatus
RowStatus }
x25DteRgLtPeerValue OBJECT-TYPE
SYNTAX Link
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
x25DteRgLtPeerTable."
::= { x25DteRgLtPeerEntry 1 }
x25DteRgLtPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS write-only
STATUS mandatory
DESCRIPTION
"This variable is used to control the addition and deletion
of individual values of the x25DteRgLtPeerTable."
::= { x25DteRgLtPeerEntry 2 }
x25DteRgLcnTable OBJECT-TYPE
SYNTAX SEQUENCE OF X25DteRgLcnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This attribute lists the Lcn components for the X25Dte, which
belong to this RemoteGroup. There is an Lcn component listed here
for every lcn connection belonging to this RemoteGroup. The lcns
were established using either a Peer component linked to this
RemoteGroup (in response to a switched call) or using a PermLcn
component linked to this RemoteGroup (a permanent connection)."
::= { x25DteRg 212 }
x25DteRgLcnEntry OBJECT-TYPE
SYNTAX X25DteRgLcnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the x25DteRgLcnTable."
INDEX {
x25DteIndex,
x25DteRgIndex,
x25DteRgLcnValue }
::= { x25DteRgLcnTable 1 }
X25DteRgLcnEntry ::= SEQUENCE {
x25DteRgLcnValue
Integer32 }
x25DteRgLcnValue OBJECT-TYPE
SYNTAX Integer32 (1..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents both the value and the index for the
x25DteRgLcnTable."
::= { x25DteRgLcnEntry 1 }
x25DteGroup OBJECT IDENTIFIER ::= { x25DteMIB 1 }
x25DteGroupBE OBJECT IDENTIFIER ::= { x25DteGroup 5 }
x25DteGroupBE00 OBJECT IDENTIFIER ::= { x25DteGroupBE 1 }
x25DteGroupBE00A OBJECT IDENTIFIER ::= { x25DteGroupBE00 2 }
x25DteCapabilities OBJECT IDENTIFIER ::= { x25DteMIB 3 }
x25DteCapabilitiesBE OBJECT IDENTIFIER ::= { x25DteCapabilities 5 }
x25DteCapabilitiesBE00 OBJECT IDENTIFIER ::= { x25DteCapabilitiesBE 1 }
x25DteCapabilitiesBE00A OBJECT IDENTIFIER ::= { x25DteCapabilitiesBE00 2 }
END