Nortel-Magellan-Passport-X25TraceRcvrMIB
DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-TYPE
FROM RFC-1212
passportMIBs
FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB
DisplayString,
StorageType,
RowStatus,
Integer32,
Unsigned32
FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB
Hex,
NonReplicated,
HexString,
EnterpriseDateAndTime,
DigitString
FROM Nortel-Magellan-Passport-TextualConventionsMIB
traceSessionIndex,
traceRcvrIndex,
traceSession,
traceIndex,
traceRcvr
FROM Nortel-Magellan-Passport-TraceBaseMIB;
x25TraceRcvrMIB OBJECT IDENTIFIER ::= { passportMIBs 62 }
traceRcvrX25 OBJECT IDENTIFIER ::= { traceRcvr 2 }
traceRcvrX25RowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25RowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrX25 components."
::= { traceRcvrX25 1 }
traceRcvrX25RowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrX25RowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrX25 component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index }
::= { traceRcvrX25RowStatusTable 1 }
TraceRcvrX25RowStatusEntry ::= SEQUENCE {
traceRcvrX25RowStatus
RowStatus,
traceRcvrX25ComponentName
DisplayString,
traceRcvrX25StorageType
StorageType,
traceRcvrX25Index
NonReplicated }
traceRcvrX25RowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrX25 components.
These components can be added and deleted."
::= { traceRcvrX25RowStatusEntry 1 }
traceRcvrX25ComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrX25RowStatusEntry 2 }
traceRcvrX25StorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrX25 tables."
::= { traceRcvrX25RowStatusEntry 4 }
traceRcvrX25Index OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrX25 tables."
::= { traceRcvrX25RowStatusEntry 10 }
traceRcvrX25Dna OBJECT IDENTIFIER ::= { traceRcvrX25 2 }
traceRcvrX25DnaRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrX25Dna components."
::= { traceRcvrX25Dna 1 }
traceRcvrX25DnaRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrX25Dna component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex }
::= { traceRcvrX25DnaRowStatusTable 1 }
TraceRcvrX25DnaRowStatusEntry ::= SEQUENCE {
traceRcvrX25DnaRowStatus
RowStatus,
traceRcvrX25DnaComponentName
DisplayString,
traceRcvrX25DnaStorageType
StorageType,
traceRcvrX25DnaIndex
NonReplicated }
traceRcvrX25DnaRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrX25Dna components.
These components cannot be added nor deleted."
::= { traceRcvrX25DnaRowStatusEntry 1 }
traceRcvrX25DnaComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrX25DnaRowStatusEntry 2 }
traceRcvrX25DnaStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrX25Dna tables."
::= { traceRcvrX25DnaRowStatusEntry 4 }
traceRcvrX25DnaIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrX25Dna tables."
::= { traceRcvrX25DnaRowStatusEntry 10 }
traceRcvrX25DnaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group contains attributes common to all Dnas. This group is
composed of two attributes which define a Dna. These attributes are
used to interpret the format of the address digits."
::= { traceRcvrX25Dna 10 }
traceRcvrX25DnaAddressEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrX25DnaAddressTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex }
::= { traceRcvrX25DnaAddressTable 1 }
TraceRcvrX25DnaAddressEntry ::= SEQUENCE {
traceRcvrX25DnaNumberingPlanIndicator
INTEGER,
traceRcvrX25DnaDataNetworkAddress
DigitString }
traceRcvrX25DnaNumberingPlanIndicator OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the Numbering Plan Indicator (NPI) of the
Dna that is entered. The address may belong to an E.164 or X.121
plan."
DEFVAL { x121 }
::= { traceRcvrX25DnaAddressEntry 1 }
traceRcvrX25DnaDataNetworkAddress OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Dna attribute contains digits which form a unique identifier for
the calling end of the trace connection. Dna digits are selected and
assigned by network operators. The maximum Dna length is 15
digits."
::= { traceRcvrX25DnaAddressEntry 2 }
traceRcvrX25DnaOutgoingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines call options for outgoing calls."
::= { traceRcvrX25Dna 11 }
traceRcvrX25DnaOutgoingOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaOutgoingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrX25DnaOutgoingOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex }
::= { traceRcvrX25DnaOutgoingOptionsTable 1 }
TraceRcvrX25DnaOutgoingOptionsEntry ::= SEQUENCE {
traceRcvrX25DnaOutCalls
INTEGER,
traceRcvrX25DnaOutDefaultPriority
INTEGER,
traceRcvrX25DnaOutIntl
INTEGER,
traceRcvrX25DnaOutDefaultPathSensitivity
INTEGER,
traceRcvrX25DnaOutDefaultPathReliability
INTEGER,
traceRcvrX25DnaOutPathReliabilityOverRide
INTEGER,
traceRcvrX25DnaOutPathReliabilitySignal
INTEGER,
traceRcvrX25DnaOutAccess
INTEGER }
traceRcvrX25DnaOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that outgoing calls (from the DTE to the
network) can be made using this particular Dna component."
DEFVAL { allowed }
::= { traceRcvrX25DnaOutgoingOptionsEntry 1 }
traceRcvrX25DnaOutDefaultPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this attribute is set to normal, then the default priority for
outgoing calls (from the DTE to the network) using this particular
Dna is normal priority when the priority is not specified in the call.
If this attribute is set to high then the default priority for outgoing
calls using this particular Dna is high priority."
DEFVAL { high }
::= { traceRcvrX25DnaOutgoingOptionsEntry 7 }
traceRcvrX25DnaOutIntl OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that outgoing international calls (from the
DTE to the network) can be made using this particular Dna.
This attribute also controls access to another numbering plan, and
specifies that cross-numbering plan calls are allowed."
DEFVAL { allowed }
::= { traceRcvrX25DnaOutgoingOptionsEntry 8 }
traceRcvrX25DnaOutDefaultPathSensitivity OBJECT-TYPE
SYNTAX INTEGER {
throughput(0),
delay(1) }
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This attribute specifies the default class of routing (delay/
throughput) for all outgoing calls (from the DTE to the network)
using this particular Dna. The chosen default class of routing
applies to all outgoing calls established using this Dna, and applies
to the packets travelling in both directions on all outgoing calls
(local to remote, and remote to local).
This attribute, if set to a value of throughput, specifies that the
default class of routing is throughput sensitive. If set to a value of
delay, then the default class of routing is delay sensitive.
This attribute is obsoleted. Please refer to defaultTransferPriority
for the corresponding new attribute."
DEFVAL { throughput }
::= { traceRcvrX25DnaOutgoingOptionsEntry 11 }
traceRcvrX25DnaOutDefaultPathReliability OBJECT-TYPE
SYNTAX INTEGER {
high(0),
normal(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default reliability class of routing for all
calls (from the DTE to the network) using this particular Dna. The
chosen default reliability class of routing normally applies to all
packets (including the call packets) travelling into the network.
A value of high specifies that packets are to be overflowed or
retransmitted at various routing levels. Typically high reliability
results in duplication and disordering of packets in the network,
when errors are detected or during link congestion. The VC handles
the duplication and disordering to ensure that packets are delivered
to the interface in the proper sequence and without duplication."
DEFVAL { high }
::= { traceRcvrX25DnaOutgoingOptionsEntry 14 }
traceRcvrX25DnaOutPathReliabilityOverRide OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that the called end of the connection will not
use the calling end provisioning data for reliability class of routing
to override the provisioning data at the called end."
DEFVAL { no }
::= { traceRcvrX25DnaOutgoingOptionsEntry 15 }
traceRcvrX25DnaOutPathReliabilitySignal OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that reliability routing signaling is not used."
DEFVAL { disallowed }
::= { traceRcvrX25DnaOutgoingOptionsEntry 16 }
traceRcvrX25DnaOutAccess OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is an extension of the Closed User Group (CUG)
facility. If this attribute is set to a value of allowed, it specifies that
outgoing calls (from the DTE to the network) to the open (non-
CUG) part of the network are permitted. It also permits outgoing
calls to interfaces that have Incoming Access capabilities. If set to a
value of disallowed, then such calls cannot be made using this Dna
(the calls will be cleared by the local DCE).
This attribute corresponds to the ITU-T 'Closed User Group with
Outgoing Access' feature."
DEFVAL { disallowed }
::= { traceRcvrX25DnaOutgoingOptionsEntry 17 }
traceRcvrX25DnaIncomingOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This group defines the call options for incoming calls."
::= { traceRcvrX25Dna 12 }
traceRcvrX25DnaIncomingOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaIncomingOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrX25DnaIncomingOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex }
::= { traceRcvrX25DnaIncomingOptionsTable 1 }
TraceRcvrX25DnaIncomingOptionsEntry ::= SEQUENCE {
traceRcvrX25DnaIncCalls
INTEGER }
traceRcvrX25DnaIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that incoming calls (from the network to the
DTE) cannot be made to this Dna."
DEFVAL { disallowed }
::= { traceRcvrX25DnaIncomingOptionsEntry 1 }
traceRcvrX25DnaCallOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaCallOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CallOptions group defines additional options for calls which
are not specific to the direction of the call."
::= { traceRcvrX25Dna 13 }
traceRcvrX25DnaCallOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaCallOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrX25DnaCallOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex }
::= { traceRcvrX25DnaCallOptionsTable 1 }
TraceRcvrX25DnaCallOptionsEntry ::= SEQUENCE {
traceRcvrX25DnaPacketSizes
OCTET STRING,
traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize
INTEGER,
traceRcvrX25DnaDefaultSendToNetworkPacketSize
INTEGER,
traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass
Unsigned32,
traceRcvrX25DnaDefaultSendToNetworkThruputClass
Unsigned32,
traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize
Unsigned32,
traceRcvrX25DnaDefaultSendToNetworkWindowSize
Unsigned32,
traceRcvrX25DnaPacketSizeNegotiation
INTEGER,
traceRcvrX25DnaCugFormat
INTEGER }
traceRcvrX25DnaPacketSizes OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the allowable packet sizes supported for calls
using this Dna.
Description of bits:
n16(0)
n32(1)
n64(2)
n128(3)
n256(4)
n512(5)
n1024(6)
n2048(7)
n4096(8)"
DEFVAL { '0100'H }
::= { traceRcvrX25DnaCallOptionsEntry 2 }
traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE
SYNTAX INTEGER {
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default local receive packet size from
network to DTE for calls using this particular Dna."
DEFVAL { n2048 }
::= { traceRcvrX25DnaCallOptionsEntry 3 }
traceRcvrX25DnaDefaultSendToNetworkPacketSize OBJECT-TYPE
SYNTAX INTEGER {
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default local send packet size from DTE
to network for all calls using this particular Dna."
DEFVAL { n2048 }
::= { traceRcvrX25DnaCallOptionsEntry 4 }
traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default receive throughput class,
(towards the interface) for all calls using this particular Dna."
DEFVAL { 10 }
::= { traceRcvrX25DnaCallOptionsEntry 5 }
traceRcvrX25DnaDefaultSendToNetworkThruputClass OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the default send throughput class (towards
the network) for all calls using this particular Dna."
DEFVAL { 10 }
::= { traceRcvrX25DnaCallOptionsEntry 6 }
traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default value for the number of data
packets that can be send to the interface before any
acknowledgment."
DEFVAL { 1 }
::= { traceRcvrX25DnaCallOptionsEntry 7 }
traceRcvrX25DnaDefaultSendToNetworkWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the default value for the number of data
packets that can be received from the interface before any
acknowledgment."
DEFVAL { 1 }
::= { traceRcvrX25DnaCallOptionsEntry 8 }
traceRcvrX25DnaPacketSizeNegotiation OBJECT-TYPE
SYNTAX INTEGER {
endToEnd(0),
local(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute, if set to local specifies that packet sizes can be
negotiated locally at the interface irrespective of the setting at the
remote interface. If set to endtoEnd, then the packet size
negotiation is between the local and remote interface (i.e. packet
sizes are the same on both interfaces)."
DEFVAL { local }
::= { traceRcvrX25DnaCallOptionsEntry 9 }
traceRcvrX25DnaCugFormat OBJECT-TYPE
SYNTAX INTEGER {
basic(0),
extended(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the format to signal CUG indices as basic or
extended. A basic CUG index format is two digits long. An
extended CUG index format is four digits long."
DEFVAL { basic }
::= { traceRcvrX25DnaCallOptionsEntry 10 }
traceRcvrX25DnaCug OBJECT IDENTIFIER ::= { traceRcvrX25Dna 2 }
traceRcvrX25DnaCugRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrX25DnaCug components."
::= { traceRcvrX25DnaCug 1 }
traceRcvrX25DnaCugRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaCugRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrX25DnaCug component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex,
traceRcvrX25DnaCugIndex }
::= { traceRcvrX25DnaCugRowStatusTable 1 }
TraceRcvrX25DnaCugRowStatusEntry ::= SEQUENCE {
traceRcvrX25DnaCugRowStatus
RowStatus,
traceRcvrX25DnaCugComponentName
DisplayString,
traceRcvrX25DnaCugStorageType
StorageType,
traceRcvrX25DnaCugIndex
Integer32 }
traceRcvrX25DnaCugRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrX25DnaCug components.
These components can be added and deleted."
::= { traceRcvrX25DnaCugRowStatusEntry 1 }
traceRcvrX25DnaCugComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrX25DnaCugRowStatusEntry 2 }
traceRcvrX25DnaCugStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrX25DnaCug tables."
::= { traceRcvrX25DnaCugRowStatusEntry 4 }
traceRcvrX25DnaCugIndex OBJECT-TYPE
SYNTAX Integer32 (1..1)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrX25DnaCug tables."
::= { traceRcvrX25DnaCugRowStatusEntry 10 }
traceRcvrX25DnaCugCugOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Attributes in this group define ClosedUserGroup options associated
with interlockCode. Dnas with the same CUG (interlockCode) can
make calls within this group. Various combinations of attributes are
defined under this option which permit or prevent calls in the same
CUG group."
::= { traceRcvrX25DnaCug 10 }
traceRcvrX25DnaCugCugOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DnaCugCugOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrX25DnaCugCugOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DnaIndex,
traceRcvrX25DnaCugIndex }
::= { traceRcvrX25DnaCugCugOptionsTable 1 }
TraceRcvrX25DnaCugCugOptionsEntry ::= SEQUENCE {
traceRcvrX25DnaCugType
INTEGER,
traceRcvrX25DnaCugDnic
DigitString,
traceRcvrX25DnaCugInterlockCode
Unsigned32,
traceRcvrX25DnaCugPreferential
INTEGER,
traceRcvrX25DnaCugOutCalls
INTEGER,
traceRcvrX25DnaCugIncCalls
INTEGER,
traceRcvrX25DnaCugPrivileged
INTEGER }
traceRcvrX25DnaCugType OBJECT-TYPE
SYNTAX INTEGER {
national(0),
international(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the CUG type as either national or
international. A national CUG has significance within the local
network only. An international CUG has significance across
network boundaries."
DEFVAL { national }
::= { traceRcvrX25DnaCugCugOptionsEntry 1 }
traceRcvrX25DnaCugDnic OBJECT-TYPE
SYNTAX DigitString (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Data Network ID Code of the network
that is administering the international CUG. This attribute is not
used for a national CUG and should be left at its default value.
The dnic value is not an arbitrary number. It is assigned by
international agreement and controlled by ITU-T."
DEFVAL { '30303030'H }
::= { traceRcvrX25DnaCugCugOptionsEntry 2 }
traceRcvrX25DnaCugInterlockCode OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies a numeric identifier of a national or
international closed user group. It is an arbitrary number. This
attribute may also be called CUG in some descriptions. Dnas
defined with this number can only make calls to Dnas defined with
the same interlockCode."
DEFVAL { 0 }
::= { traceRcvrX25DnaCugCugOptionsEntry 3 }
traceRcvrX25DnaCugPreferential OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that this Cug is to be used on all outgoing
calls to the X.25 trace receiver."
DEFVAL { yes }
::= { traceRcvrX25DnaCugCugOptionsEntry 4 }
traceRcvrX25DnaCugOutCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that outgoing calls (from the DTE into the
network) can be made using this particular Cug."
DEFVAL { allowed }
::= { traceRcvrX25DnaCugCugOptionsEntry 5 }
traceRcvrX25DnaCugIncCalls OBJECT-TYPE
SYNTAX INTEGER {
disallowed(0),
allowed(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies that incoming calls (from the network to the
DTE) cannot be accepted using this Cug."
DEFVAL { disallowed }
::= { traceRcvrX25DnaCugCugOptionsEntry 6 }
traceRcvrX25DnaCugPrivileged OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies that this Cug is privileged. For a call
between two closed user group Dnas to connect, at least one Dna
must have a privileged Cug."
DEFVAL { yes }
::= { traceRcvrX25DnaCugCugOptionsEntry 7 }
traceRcvrX25Dc OBJECT IDENTIFIER ::= { traceRcvrX25 3 }
traceRcvrX25DcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This entry controls the addition and deletion of
traceRcvrX25Dc components."
::= { traceRcvrX25Dc 1 }
traceRcvrX25DcRowStatusEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceRcvrX25Dc component."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DcIndex }
::= { traceRcvrX25DcRowStatusTable 1 }
TraceRcvrX25DcRowStatusEntry ::= SEQUENCE {
traceRcvrX25DcRowStatus
RowStatus,
traceRcvrX25DcComponentName
DisplayString,
traceRcvrX25DcStorageType
StorageType,
traceRcvrX25DcIndex
NonReplicated }
traceRcvrX25DcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceRcvrX25Dc components.
These components cannot be added nor deleted."
::= { traceRcvrX25DcRowStatusEntry 1 }
traceRcvrX25DcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceRcvrX25DcRowStatusEntry 2 }
traceRcvrX25DcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceRcvrX25Dc tables."
::= { traceRcvrX25DcRowStatusEntry 4 }
traceRcvrX25DcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceRcvrX25Dc tables."
::= { traceRcvrX25DcRowStatusEntry 10 }
traceRcvrX25DcOptionsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceRcvrX25DcOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Options group defines attributes associated with the SVC direct
call."
::= { traceRcvrX25Dc 10 }
traceRcvrX25DcOptionsEntry OBJECT-TYPE
SYNTAX TraceRcvrX25DcOptionsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceRcvrX25DcOptionsTable."
INDEX {
traceIndex,
traceRcvrIndex,
traceRcvrX25Index,
traceRcvrX25DcIndex }
::= { traceRcvrX25DcOptionsTable 1 }
TraceRcvrX25DcOptionsEntry ::= SEQUENCE {
traceRcvrX25DcRemoteNpi
INTEGER,
traceRcvrX25DcRemoteDna
DigitString,
traceRcvrX25DcType
INTEGER,
traceRcvrX25DcUserData
HexString }
traceRcvrX25DcRemoteNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the numbering plan used for the remoteDna."
DEFVAL { x121 }
::= { traceRcvrX25DcOptionsEntry 3 }
traceRcvrX25DcRemoteDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies the Data Network Address of the remote end
of the connection. This is the DNA of the X.25 trace receiver which
will receive the trace data."
::= { traceRcvrX25DcOptionsEntry 4 }
traceRcvrX25DcType OBJECT-TYPE
SYNTAX INTEGER {
switched(0),
permanentMaster(1),
permanentSlave(2),
permanentBackupSlave(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute specifies the type of call as switched. For a switched
call, no information is defined at the remote end about the local end
of the connection."
DEFVAL { switched }
::= { traceRcvrX25DcOptionsEntry 6 }
traceRcvrX25DcUserData OBJECT-TYPE
SYNTAX HexString (SIZE (0..16))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute contains the user data. It is a 0 to 16 byte length string
which is appended to the call request packet that is presented to the
called (destination) DTE."
DEFVAL { ''H }
::= { traceRcvrX25DcOptionsEntry 8 }
traceSessionX25 OBJECT IDENTIFIER ::= { traceSession 2 }
traceSessionX25RowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionX25RowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
traceSessionX25 components."
::= { traceSessionX25 1 }
traceSessionX25RowStatusEntry OBJECT-TYPE
SYNTAX TraceSessionX25RowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceSessionX25 component."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionX25Index }
::= { traceSessionX25RowStatusTable 1 }
TraceSessionX25RowStatusEntry ::= SEQUENCE {
traceSessionX25RowStatus
RowStatus,
traceSessionX25ComponentName
DisplayString,
traceSessionX25StorageType
StorageType,
traceSessionX25Index
NonReplicated }
traceSessionX25RowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceSessionX25 components.
These components cannot be added nor deleted."
::= { traceSessionX25RowStatusEntry 1 }
traceSessionX25ComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceSessionX25RowStatusEntry 2 }
traceSessionX25StorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceSessionX25 tables."
::= { traceSessionX25RowStatusEntry 4 }
traceSessionX25Index OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceSessionX25 tables."
::= { traceSessionX25RowStatusEntry 10 }
traceSessionX25Vc OBJECT IDENTIFIER ::= { traceSessionX25 2 }
traceSessionX25VcRowStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionX25VcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This entry controls the addition and deletion of
traceSessionX25Vc components."
::= { traceSessionX25Vc 1 }
traceSessionX25VcRowStatusEntry OBJECT-TYPE
SYNTAX TraceSessionX25VcRowStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A single entry in the table represents a single
traceSessionX25Vc component."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionX25Index,
traceSessionX25VcIndex }
::= { traceSessionX25VcRowStatusTable 1 }
TraceSessionX25VcRowStatusEntry ::= SEQUENCE {
traceSessionX25VcRowStatus
RowStatus,
traceSessionX25VcComponentName
DisplayString,
traceSessionX25VcStorageType
StorageType,
traceSessionX25VcIndex
NonReplicated }
traceSessionX25VcRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable is used as the basis for SNMP naming of
traceSessionX25Vc components.
These components cannot be added nor deleted."
::= { traceSessionX25VcRowStatusEntry 1 }
traceSessionX25VcComponentName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable provides the component's string name for
use with the ASCII Console Interface"
::= { traceSessionX25VcRowStatusEntry 2 }
traceSessionX25VcStorageType OBJECT-TYPE
SYNTAX StorageType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This variable represents the storage type value for the
traceSessionX25Vc tables."
::= { traceSessionX25VcRowStatusEntry 4 }
traceSessionX25VcIndex OBJECT-TYPE
SYNTAX NonReplicated
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This variable represents the index for the traceSessionX25Vc tables."
::= { traceSessionX25VcRowStatusEntry 10 }
traceSessionX25VcCadTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionX25VcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group represents operational call data related to General Vc. It
can be displayed only for General Vc which is created by
application."
::= { traceSessionX25Vc 10 }
traceSessionX25VcCadEntry OBJECT-TYPE
SYNTAX TraceSessionX25VcCadEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionX25VcCadTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionX25Index,
traceSessionX25VcIndex }
::= { traceSessionX25VcCadTable 1 }
TraceSessionX25VcCadEntry ::= SEQUENCE {
traceSessionX25VcType
INTEGER,
traceSessionX25VcState
INTEGER,
traceSessionX25VcPreviousState
INTEGER,
traceSessionX25VcDiagnosticCode
Unsigned32,
traceSessionX25VcPreviousDiagnosticCode
Unsigned32,
traceSessionX25VcCalledNpi
INTEGER,
traceSessionX25VcCalledDna
DigitString,
traceSessionX25VcCalledLcn
Unsigned32,
traceSessionX25VcCallingNpi
INTEGER,
traceSessionX25VcCallingDna
DigitString,
traceSessionX25VcCallingLcn
Unsigned32,
traceSessionX25VcAccountingEnabled
INTEGER,
traceSessionX25VcFastSelectCall
INTEGER,
traceSessionX25VcLocalRxPktSize
INTEGER,
traceSessionX25VcLocalTxPktSize
INTEGER,
traceSessionX25VcLocalTxWindowSize
Unsigned32,
traceSessionX25VcLocalRxWindowSize
Unsigned32,
traceSessionX25VcPathReliability
INTEGER,
traceSessionX25VcAccountingEnd
INTEGER,
traceSessionX25VcPriority
INTEGER,
traceSessionX25VcSegmentSize
Unsigned32,
traceSessionX25VcSubnetTxPktSize
INTEGER,
traceSessionX25VcSubnetTxWindowSize
Unsigned32,
traceSessionX25VcSubnetRxPktSize
INTEGER,
traceSessionX25VcSubnetRxWindowSize
Unsigned32,
traceSessionX25VcMaxSubnetPktSize
Unsigned32,
traceSessionX25VcTransferPriorityToNetwork
INTEGER,
traceSessionX25VcTransferPriorityFromNetwork
INTEGER }
traceSessionX25VcType OBJECT-TYPE
SYNTAX INTEGER {
svc(0),
pvc(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the type of call, pvc or svc. type is provided
at provisioning time."
::= { traceSessionX25VcCadEntry 1 }
traceSessionX25VcState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the state of call control. P5 state is not
supported but is listed for completness. Transitions from one state to
another take very short time. state most often displayed is
dataTransferP4."
::= { traceSessionX25VcCadEntry 2 }
traceSessionX25VcPreviousState OBJECT-TYPE
SYNTAX INTEGER {
creating(0),
readyP1(1),
dteWaitingP2(2),
dceWaitingP3(3),
dataTransferP4(4),
unsupportedP5(5),
dteClearRequestP6(6),
dceClearIndicationP7(7),
termination(8) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the previous state of call control. This is a
valuable field to determine how the processing is progressing."
::= { traceSessionX25VcCadEntry 3 }
traceSessionX25VcDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { traceSessionX25VcCadEntry 4 }
traceSessionX25VcPreviousDiagnosticCode OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the internal substate of call control. It is used
to further refine state of call processing."
::= { traceSessionX25VcCadEntry 5 }
traceSessionX25VcCalledNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
called end."
::= { traceSessionX25VcCadEntry 6 }
traceSessionX25VcCalledDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
called (destination) DTE to which this call is sent. This address if
defined at recieving end will complete Vc connection."
::= { traceSessionX25VcCadEntry 7 }
traceSessionX25VcCalledLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the called
end. It is valid only after both ends of Vc exchanged relevant
information."
::= { traceSessionX25VcCadEntry 8 }
traceSessionX25VcCallingNpi OBJECT-TYPE
SYNTAX INTEGER {
x121(0),
e164(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Numbering Plan Indicator (NPI) of the
calling end."
::= { traceSessionX25VcCadEntry 9 }
traceSessionX25VcCallingDna OBJECT-TYPE
SYNTAX DigitString (SIZE (1..15))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Data Network Address (Dna) of the
calling end."
::= { traceSessionX25VcCadEntry 10 }
traceSessionX25VcCallingLcn OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the Logical Channel Number of the calling
end."
::= { traceSessionX25VcCadEntry 11 }
traceSessionX25VcAccountingEnabled OBJECT-TYPE
SYNTAX INTEGER {
yes(0),
no(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates that this optional section of accounting
record is suppressed or permitted. If accountingEnabled is yes,
conditions for generation of accounting record were met. These
conditions include billing options, vc recovery conditions and
Module wide accounting data options."
::= { traceSessionX25VcCadEntry 12 }
traceSessionX25VcFastSelectCall OBJECT-TYPE
SYNTAX INTEGER {
no(0),
yes(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays that this is a fast select call."
::= { traceSessionX25VcCadEntry 13 }
traceSessionX25VcLocalRxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of send packets."
::= { traceSessionX25VcCadEntry 14 }
traceSessionX25VcLocalTxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of send packets."
::= { traceSessionX25VcCadEntry 15 }
traceSessionX25VcLocalTxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the send window size provided on incoming
call packets or the default when a call request packet does not
explicitly provide the window size."
::= { traceSessionX25VcCadEntry 16 }
traceSessionX25VcLocalRxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..127)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the receive window size provided on
incoming call packets or the default when a call request does not
explicitly provide the window sizes."
::= { traceSessionX25VcCadEntry 17 }
traceSessionX25VcPathReliability OBJECT-TYPE
SYNTAX INTEGER {
high(0),
normal(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the path reliability."
::= { traceSessionX25VcCadEntry 19 }
traceSessionX25VcAccountingEnd OBJECT-TYPE
SYNTAX INTEGER {
callingEnd(0),
calledEnd(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates if this end should generate an accounting
record. Normally, callingEnd is the end to generate an accounting
record."
::= { traceSessionX25VcCadEntry 20 }
traceSessionX25VcPriority OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(1) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays whether the call is a normal or a high
priority call."
::= { traceSessionX25VcCadEntry 21 }
traceSessionX25VcSegmentSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the segment size (in bytes) used on the call.
It is used to calculate the number of segments transmitted and
received."
::= { traceSessionX25VcCadEntry 22 }
traceSessionX25VcSubnetTxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of the data packets
on this Vc."
::= { traceSessionX25VcCadEntry 23 }
traceSessionX25VcSubnetTxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the current send window size of Vc."
::= { traceSessionX25VcCadEntry 24 }
traceSessionX25VcSubnetRxPktSize OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
n16(4),
n32(5),
n64(6),
n128(7),
n256(8),
n512(9),
n1024(10),
n2048(11),
n4096(12) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the locally negotiated size of receive packets."
::= { traceSessionX25VcCadEntry 25 }
traceSessionX25VcSubnetRxWindowSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the receive window size provided on
incoming call packets and to the default when a call request does
not explicitly provide the window sizes."
::= { traceSessionX25VcCadEntry 26 }
traceSessionX25VcMaxSubnetPktSize OBJECT-TYPE
SYNTAX Unsigned32 (0..4096)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the maximum packet size allowed on Vc."
::= { traceSessionX25VcCadEntry 27 }
traceSessionX25VcTransferPriorityToNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the priority in which data is transferred to the
network.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), and routing metric (delay
or throughput).
When the transfer priority is set at high, the trunk queue is set to
high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, the routing metric is set to throughput."
::= { traceSessionX25VcCadEntry 28 }
traceSessionX25VcTransferPriorityFromNetwork OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
high(9) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the priority in which data is transferred from
the network.
The transfer priority is a preference specified by an application
according to its delay-sensitivity requirement. Frames with high
transfer priority are served by the network before the frames with
normal priority.
Each transfer priority contains a predetermined setting for trunk
queue (interrupting, delay or throughput), and routing metric (delay
or throughput).
When the transfer priority is set at high, and the trunk queue is set
to high, the routing metric is set to delay.
When the transfer priority is set at normal, the trunk queue is set to
normal, and the routing metric is set to throughput."
::= { traceSessionX25VcCadEntry 29 }
traceSessionX25VcIntdTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionX25VcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
This group defines display of interval data collected by Vc. Data in
this group is variable and may depend on time when this display
command is issued."
::= { traceSessionX25Vc 11 }
traceSessionX25VcIntdEntry OBJECT-TYPE
SYNTAX TraceSessionX25VcIntdEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionX25VcIntdTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionX25Index,
traceSessionX25VcIndex }
::= { traceSessionX25VcIntdTable 1 }
TraceSessionX25VcIntdEntry ::= SEQUENCE {
traceSessionX25VcCallReferenceNumber
Hex,
traceSessionX25VcElapsedTimeTillNow
Unsigned32,
traceSessionX25VcSegmentsRx
Unsigned32,
traceSessionX25VcSegmentsSent
Unsigned32,
traceSessionX25VcStartTime
EnterpriseDateAndTime }
traceSessionX25VcCallReferenceNumber OBJECT-TYPE
SYNTAX Hex (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the call reference number which is a unique
number generated by the switch.The same Call Reference Number
is stored in the interval data (accounting record) at both ends of the
call. It can be used as one of the attributes in matching duplicate
records generated at each end of the call."
::= { traceSessionX25VcIntdEntry 1 }
traceSessionX25VcElapsedTimeTillNow OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the elapsed time representing the period of
this interval data. It is elapsed time in 0.1 second increments since
Vc started."
::= { traceSessionX25VcIntdEntry 2 }
traceSessionX25VcSegmentsRx OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments received at the time
command was issued. This is the segment received count
maintained by accounting at each end of the Vc. This counter is
updated only when the packet cannot be successfully delivered out
of the sink Vc and to the sink AP Conditions in which packets may
be discarded by the sink Vc include: missing packets due to subnet
discards, segmentation protocol violations due to subnet discard,
duplicated and out-of-ranged packets and packets that arrive while
Vc is in path recovery state."
::= { traceSessionX25VcIntdEntry 3 }
traceSessionX25VcSegmentsSent OBJECT-TYPE
SYNTAX Unsigned32 (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of segments sent at the time
command was issued. This is the segment sent count maintained by
accounting at the source Vc. Vc only counts packets that Vc thinks
can be delivered successfully into the subnet. In reality, these
packets may be dropped by trunking, for instance. This counter is
not updated when splitting fails, when Vc is in a path recovery state,
when packet forwarding fails to forward this packet and when
subsequent packets have to be discarded as we want to minimize the
chance of out-of-sequence and do not intentionally send out-of-
sequenced packets into the subnet."
::= { traceSessionX25VcIntdEntry 4 }
traceSessionX25VcStartTime OBJECT-TYPE
SYNTAX EnterpriseDateAndTime (SIZE (0 | 19))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the start time of this interval period. If Vc
spans 12 hour time or time of day change startTime reflects new
time as recorded at 12 hour periods or time of day changes."
::= { traceSessionX25VcIntdEntry 5 }
traceSessionX25VcStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TraceSessionX25VcStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"*** THIS TABLE CURRENTLY NOT IMPLEMENTED ***
... Statistics(Stats)
This group defines general attributes collected by general Vc.
The purpose of Vc attributes is to aid end users and verification
people to understand the Vc internal behavior. This is particularly
useful when the network has experienced abnormality and we want
to isolate problems and pinpoint trouble spots.
Attributes are collected on a per Vc basis. Until a need is identified,
statistics are not collected at a processor level. Each attribute is
stored in a 32 bit field and is initialized to zero when a Vc enters
into the data transfer state. When a PVC is disconnected and then
connected again, the attributes will be reset. Attributes cannot be
reset through other methods."
::= { traceSessionX25Vc 12 }
traceSessionX25VcStatsEntry OBJECT-TYPE
SYNTAX TraceSessionX25VcStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the traceSessionX25VcStatsTable."
INDEX {
traceIndex,
traceSessionIndex,
traceSessionX25Index,
traceSessionX25VcIndex }
::= { traceSessionX25VcStatsTable 1 }
TraceSessionX25VcStatsEntry ::= SEQUENCE {
traceSessionX25VcAckStackingTimeouts
Unsigned32,
traceSessionX25VcOutOfRangeFrmFromSubnet
Unsigned32,
traceSessionX25VcDuplicatesFromSubnet
Unsigned32,
traceSessionX25VcFrmRetryTimeouts
Unsigned32,
traceSessionX25VcPeakRetryQueueSize
Unsigned32,
traceSessionX25VcPeakOoSeqQueueSize
Unsigned32,
traceSessionX25VcPeakOoSeqFrmForwarded
Unsigned32,
traceSessionX25VcPeakStackedAcksRx
Unsigned32,
traceSessionX25VcSubnetRecoveries
Unsigned32,
traceSessionX25VcWindowClosuresToSubnet
Unsigned32,
traceSessionX25VcWindowClosuresFromSubnet
Unsigned32,
traceSessionX25VcWrTriggers
Unsigned32 }
traceSessionX25VcAckStackingTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of ack stacking timer expiries.
It is used as an indicator of the acknowledgment behavior across the
subnet when ack stacking is in effect. If it expires often, usually this
means end users will experience longer delay.
The ack stacking timer specifies how long the Vc will wait before
finally sending the subnet acknowledgment. if this attribute is set to
a value of 0, then the Vc will automatically return acknowledgment
packets without delay. If this attribute is set to a value other than
zero, then the Vc will wait for this amount of time in an attempt to
piggyback the acknowledgment packet on another credit or data
packet. If the Vc cannot piggyback the acknowledgment packet
within this time, then the packet is returned without piggybacking."
::= { traceSessionX25VcStatsEntry 1 }
traceSessionX25VcOutOfRangeFrmFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of subnet frames discarded due to
the sequence number being out of range.
Two Categories apply for the General Vc
1) lost Acks (previous Range)
2) unexpected Packets (next Range)
Vc internally maintains its own sequence number of packet order
and sequencing. Due to packet retransmission, Vc may receive
duplicate packets that have the same Vc internal sequence number.
Only 1 copy is accepted by the Vc and other copies of the same
packets are detected through this count. This attribute can be used to
record the frequency of packet retransmission due to Vc and other
part of the subnet."
::= { traceSessionX25VcStatsEntry 2 }
traceSessionX25VcDuplicatesFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of subnet packets discarded due to
duplication. It is used to detect software error fault or duplication
caused by retransmitting."
::= { traceSessionX25VcStatsEntry 3 }
traceSessionX25VcFrmRetryTimeouts OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of frames which have
retransmission time-out.
If packets from Vc into the subnet are discarded by the subnet, the
source Vc will not receive any acknowledgment. The retransmission
timer then expires and packets will be retransmitted again. Note that
the Vc idle probe may be retransmitted and is included in this count.
This statistics does not show the distribution of how many times
packets are retransmitted (e.g. first retransmission results in
successful packet forwarding)."
::= { traceSessionX25VcStatsEntry 4 }
traceSessionX25VcPeakRetryQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of the retransmission queue.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. It records the largest body of
unacknowledged packets."
::= { traceSessionX25VcStatsEntry 5 }
traceSessionX25VcPeakOoSeqQueueSize OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of the out of sequence queue.
This attribute is used as an indicator of the sequencing behavior
across the subnet. It records the largest body of out of sequence
packets."
::= { traceSessionX25VcStatsEntry 6 }
traceSessionX25VcPeakOoSeqFrmForwarded OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of the sequence packet queue.
This attribute is used as an indicator of the sequencing behavior
across the subnet. It records the largest body of out of sequence
packets, which by the receipt of an expected packet have been
transformed to expected packets. The number of times this peak is
reached is not recorded as it is traffic dependent."
::= { traceSessionX25VcStatsEntry 7 }
traceSessionX25VcPeakStackedAcksRx OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute indicates the peak size of wait acks.
This attribute is used as an indicator of the acknowledgment
behavior across the subnet. It records the largest collective
acknowledgment."
::= { traceSessionX25VcStatsEntry 8 }
traceSessionX25VcSubnetRecoveries OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of successful Vc recovery attempts.
This attribute is used as an indicator of how many times the Vc path
is broken but can be recovered. This attribute is useful to record the
number of network path failures."
::= { traceSessionX25VcStatsEntry 9 }
traceSessionX25VcWindowClosuresToSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of window closures to subnet.
A packet may have been sent into the subnet but its
acknowledgment from the remote Vc has not yet been received.
This is a 8 bit sequence number.This number is useful in detecting
whether the Vc is sending any packet into the subnet."
::= { traceSessionX25VcStatsEntry 10 }
traceSessionX25VcWindowClosuresFromSubnet OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute counts the number of window closures from subnet.
This attribute is useful in detecting whether the Vc is receiving any
packet from the subnet."
::= { traceSessionX25VcStatsEntry 11 }
traceSessionX25VcWrTriggers OBJECT-TYPE
SYNTAX Unsigned32 (0..5000)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute displays the number of times the Vc stays within the
W-R region. The W-R region is a value used to determined the
timing of credit transmission. Should the current window size be
beneath this value, the credits will be transmitted immediately.
Otherwise, they will be transmitted later with actual data. The
wrTriggers statistic is therefore used to analyze the flow control and
credit mechanism."
::= { traceSessionX25VcStatsEntry 12 }
x25TraceRcvrGroup OBJECT IDENTIFIER ::= { x25TraceRcvrMIB 1 }
x25TraceRcvrGroupBD OBJECT IDENTIFIER ::= { x25TraceRcvrGroup 4 }
x25TraceRcvrGroupBD00 OBJECT IDENTIFIER ::= { x25TraceRcvrGroupBD 1 }
x25TraceRcvrGroupBD00A OBJECT IDENTIFIER ::= { x25TraceRcvrGroupBD00 2 }
x25TraceRcvrCapabilities OBJECT IDENTIFIER ::= { x25TraceRcvrMIB 3 }
x25TraceRcvrCapabilitiesBD OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilities 4 }
x25TraceRcvrCapabilitiesBD00 OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilitiesBD 1 }
x25TraceRcvrCapabilitiesBD00A OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilitiesBD00 2 }
END