SNMP MIB Search

Return to vendor list
View mib
Download mib file
Mib: RIPv2-MIB
Version: 1


Objects
Scalar Object
rip2GlobalRouteChanges.1.3.6.1.2.1.23.1.1
The number of route changes made to the IP Route
Database by RIP.  This does not include the refresh
of a route's age.
rip2GlobalQueries.1.3.6.1.2.1.23.1.2
The number of responses sent to RIP queries
from other systems.
rip2IfStatEntry.1.3.6.1.2.1.23.2.1
A Single Routing Domain in a single Subnet.
rip2IfConfEntry.1.3.6.1.2.1.23.3.1
A Single Routing Domain in a single Subnet.
rip2PeerEntry.1.3.6.1.2.1.23.4.1
Information regarding a single routing peer.
Tabular Object
rip2IfStatAddress.1.3.6.1.2.1.23.2.1.1
The IP Address of this system on the indicated
subnet. For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order.
rip2IfStatRcvBadPackets.1.3.6.1.2.1.23.2.1.2
The number of RIP response packets received by
the RIP process which were subsequently discarded
for any reason (e.g. a version 0 packet, or an
unknown command type).
rip2IfStatRcvBadRoutes.1.3.6.1.2.1.23.2.1.3
The number of routes, in valid RIP packets,
which were ignored for any reason (e.g. unknown
address family, or invalid metric).
rip2IfStatSentUpdates.1.3.6.1.2.1.23.2.1.4
The number of triggered RIP updates actually
sent on this interface.  This explicitly does
NOT include full updates sent containing new
information.
rip2IfStatStatus.1.3.6.1.2.1.23.2.1.5
Writing invalid has the effect of deleting
this interface.
rip2IfConfAddress.1.3.6.1.2.1.23.3.1.1
The IP Address of this system on the indicated
subnet.  For unnumbered interfaces, the value 0.0.0.N,
where the least significant 24 bits (N) is the ifIndex
for the IP Interface in network byte order.
rip2IfConfDomain.1.3.6.1.2.1.23.3.1.2
Value inserted into the Routing Domain field
of all RIP packets sent on this interface.
rip2IfConfAuthType.1.3.6.1.2.1.23.3.1.3
The type of Authentication used on this
interface.
rip2IfConfAuthKey.1.3.6.1.2.1.23.3.1.4
The value to be used as the Authentication Key
whenever the corresponding instance of
rip2IfConfAuthType has a value other than
noAuthentication.  A modification of the corresponding
instance of rip2IfConfAuthType does not modify
the rip2IfConfAuthKey value.  If a string shorter
than 16 octets is supplied, it will be left-
justified and padded to 16 octets, on the right,
with nulls (0x00).
Reading this object always results in an  OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object.
rip2IfConfSend.1.3.6.1.2.1.23.3.1.5
What the router sends on this interface.
ripVersion1 implies sending RIP updates compliant
with  RFC  1058.   rip1Compatible implies
broadcasting RIP-2 updates using RFC 1058 route
subsumption rules.  ripVersion2 implies
multicasting RIP-2 updates.  ripV1Demand indicates
the use of Demand RIP on a WAN interface under RIP
Version 1 rules.  ripV2Demand indicates the use of
Demand RIP on a WAN interface under Version 2 rules.
rip2IfConfReceive.1.3.6.1.2.1.23.3.1.6
This indicates which version of RIP updates
are to be accepted.  Note that rip2 and
rip1OrRip2 implies reception of multicast
packets.
rip2IfConfDefaultMetric.1.3.6.1.2.1.23.3.1.7
This variable indicates the metric that is to
be used for the default route entry in RIP updates
originated on this interface.  A value of zero
indicates that no default route should be
originated; in this case, a default route via
another router may be propagated.
rip2IfConfStatus.1.3.6.1.2.1.23.3.1.8
Writing invalid has  the  effect  of  deleting
this interface.
rip2IfConfSrcAddress.1.3.6.1.2.1.23.3.1.9
The IP Address this system will use as a source
address on this interface.  If it is a numbered
interface, this MUST be the same value as
rip2IfConfAddress.  On unnumbered interfaces,
it must be the value of rip2IfConfAddress for
some interface on the system.
rip2PeerAddress.1.3.6.1.2.1.23.4.1.1
The IP Address that the peer is using as its source
address.  Note that on an unnumbered link, this may
not be a member of any subnet on the system.
rip2PeerDomain.1.3.6.1.2.1.23.4.1.2
The value in the Routing Domain field  in  RIP
packets received from the peer.  As domain suuport
is deprecated, this must be zero.
rip2PeerLastUpdate.1.3.6.1.2.1.23.4.1.3
The value of sysUpTime when the most recent
RIP update was received from this system.
rip2PeerVersion.1.3.6.1.2.1.23.4.1.4
The RIP version number in the header of the
last RIP packet received.
rip2PeerRcvBadPackets.1.3.6.1.2.1.23.4.1.5
The number of RIP response packets from this
peer discarded as invalid.
rip2PeerRcvBadRoutes.1.3.6.1.2.1.23.4.1.6
The number of routes from this peer that were
ignored because the entry format was invalid.
Table
rip2IfStatTable.1.3.6.1.2.1.23.2
A list of subnets which require separate
status monitoring in RIP.
rip2IfConfTable.1.3.6.1.2.1.23.3
A list of subnets which require separate
configuration in RIP.
rip2PeerTable.1.3.6.1.2.1.23.4
A list of RIP Peers.
Object Identifier
rip2.1.3.6.1.2.1.23
The MIB module to describe the RIP2 Version 2 Protocol
rip2Globals.1.3.6.1.2.1.23.1
rip2Conformance.1.3.6.1.2.1.23.5
rip2Groups.1.3.6.1.2.1.23.5.1
rip2Compliances.1.3.6.1.2.1.23.5.2
Group
rip2GlobalGroup.1.3.6.1.2.1.23.5.1.1
This group defines global controls for RIP-II systems.
rip2IfStatGroup.1.3.6.1.2.1.23.5.1.2
This group defines interface statistics for RIP-II systems.
rip2IfConfGroup.1.3.6.1.2.1.23.5.1.3
This group defines interface configuration for RIP-II systems.
rip2PeerGroup.1.3.6.1.2.1.23.5.1.4
This group defines peer information for RIP-II systems.
Copyright (c) Tandem Systems, Ltd., 2002-2011