| Scalar Object |
| snmpProxyEntry | .1.3.6.1.6.3.14.1.2.1 |
A set of translation parameters used by a proxy forwarder
application for forwarding SNMP messages.
Entries in the snmpProxyTable are created and deleted
using the snmpProxyRowStatus object. |
| Tabular Object |
| snmpProxyName | .1.3.6.1.6.3.14.1.2.1.1 |
The locally arbitrary, but unique identifier associated
with this snmpProxyEntry. |
| snmpProxyType | .1.3.6.1.6.3.14.1.2.1.2 |
The type of message that may be forwarded using
the translation parameters defined by this entry. |
| snmpProxyContextEngineID | .1.3.6.1.6.3.14.1.2.1.3 |
The contextEngineID contained in messages that
may be forwarded using the translation parameters
defined by this entry. |
| snmpProxyContextName | .1.3.6.1.6.3.14.1.2.1.4 |
The contextName contained in messages that may be
forwarded using the translation parameters defined
by this entry.
This object is optional, and if not supported, the
contextName contained in a message is ignored when
selecting an entry in the snmpProxyTable. |
| snmpProxyTargetParamsIn | .1.3.6.1.6.3.14.1.2.1.5 |
This object selects an entry in the snmpTargetParamsTable.
The selected entry is used to determine which row of the
snmpProxyTable to use for forwarding received messages. |
| snmpProxySingleTargetOut | .1.3.6.1.6.3.14.1.2.1.6 |
This object selects a management target defined in the
snmpTargetAddrTable (in the SNMP-TARGET-MIB). The
selected target is defined by an entry in the
snmpTargetAddrTable whose index value (snmpTargetAddrName)
is equal to this object.
This object is only used when selection of a single
target is required (i.e. when forwarding an incoming
read or write request). |
| snmpProxyMultipleTargetOut | .1.3.6.1.6.3.14.1.2.1.7 |
This object selects a set of management targets defined
in the snmpTargetAddrTable (in the SNMP-TARGET-MIB).
This object is only used when selection of multiple
targets is required (i.e. when forwarding an incoming
notification). |
| snmpProxyStorageType | .1.3.6.1.6.3.14.1.2.1.8 |
The storage type of this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. |
| snmpProxyRowStatus | .1.3.6.1.6.3.14.1.2.1.9 |
The status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
The following objects may not be modified while the
value of this object is active(1):
- snmpProxyType
- snmpProxyContextEngineID
- snmpProxyContextName
- snmpProxyTargetParamsIn
- snmpProxySingleTargetOut
- snmpProxyMultipleTargetOut |
| Table |
| snmpProxyTable | .1.3.6.1.6.3.14.1.2 |
The table of translation parameters used by proxy forwarder
applications for forwarding SNMP messages. |
| Object Identifier |
| snmpProxyMIB | .1.3.6.1.6.3.14 |
This MIB module defines MIB objects which provide
mechanisms to remotely configure the parameters
used by a proxy forwarding application.
Copyright (C) The Internet Society (2002). This
version of this MIB module is part of RFC 3413;
see the RFC itself for full legal notices.
|
| snmpProxyObjects | .1.3.6.1.6.3.14.1 |
| snmpProxyConformance | .1.3.6.1.6.3.14.3 |
| snmpProxyCompliances | .1.3.6.1.6.3.14.3.1 |
| snmpProxyGroups | .1.3.6.1.6.3.14.3.2 |
| Group |
| snmpProxyGroup | .1.3.6.1.6.3.14.3.2.3 |
A collection of objects providing remote configuration of
management target translation parameters for use by
proxy forwarder applications. |