SNMP MIB Search

-- *****************************************************************
-- Generic Object MIB
--
-- June 2002
--
-- Copyright (c) 1996-2001, 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************

-- 
-- LAST-UPDATED "200206180000Z"
-- DESCRIPTION 
--     "This MIB Contains objects used in traps.
--     These objects are sent in traps with the values
--     applicable for objects defined elsewhere. The SNMP
--     operations on these objects may not be meaningful
--     or SNMP operations may not be supported."
--
-- REVISION "200206180000Z"
-- DESCRIPTION
--        CONTACT-INFO
--              "         Cisco Systems
--                        Customer Service
--
--                Postal: 170 W Tasman Drive
--                        San Jose, CA  95134
--                        USA
--
--                        Tel: +1 800 553-NETS
--
--                E-mail: cs-wanatm@cisco.com"
--    "
--

GENERICOBJECT-MIB DEFINITIONS ::= BEGIN
IMPORTS
    OBJECT-TYPE                         FROM RFC-1212
    DisplayString                       FROM RFC1213-MIB
    cardGeneric                         FROM BASIS-MIB;

genericObjects    OBJECT IDENTIFIER ::= { cardGeneric 8}

genericLineNum  OBJECT-TYPE
    SYNTAX    INTEGER 
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "This is the generic line number used in traps. This object
         cannot be set or read. This object may refer to a T1, T3 
         or X21 line. (It is a proxy for other objects lineNum,
         dsx3LineNum and x21LineNum).

         Currently, the ranges are
         T1/E1    1..56
         T3/E3    1..3
         X21      1..4
        "
    ::= { genericObjects 1}

genericLineType  OBJECT-TYPE
    SYNTAX    INTEGER {
       -- T1/E1 line types. Refer to the MIB object
       -- lineType for details regarding the types below.
       dsx1ESF(1),
       dsx1D4(2),
       dsx1E1(3),
       dsx1E1CRC(4),
       dsx1E1MF(5),
       dsx1E1CRC-MF(6),
       dsx1E1clearchannel(7),

       -- T3/E3 line types. Refer to the MIB object
       -- dsx3LineType for details regarding the types below.
       dsx3CbitParity(51),
       dsx3g832-g804(52),
       dsx3m13mode(53),
       dsx3g751(54),
       dsx3Unframed(55),
       e3Unframed(56),

       -- HSSI line types. Refer to the MIB object
       -- x21LineType for details regarding the types below.
       x21dte(101),
       x21dce(102),

       -- Sonet line types. Refer to the MIB object
       -- sonetLineType for details regarding the types below.
       sonetSts3c(151),
       sonetStm1(152),
       sonetSts12c(153),
       sonetStm4(154)
    }
 
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "This is the generic line type used in traps. This object
         cannot be set or read. Depending on the value, this object
         may refer to a T1, T3 or X21 line type.

         It is a proxy for other objects lineType, dsx3LineType and
         x21LineType.
        "
    ::= { genericObjects 2}

genericTimeStamp  OBJECT-TYPE
    SYNTAX    DisplayString (SIZE (1..30))
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "This is the generic time stamp used in traps. This object
         cannot be set or read. This object will be used by all new
         traps to tell the time that a given trap was originated.
        "
    ::= { genericObjects 3}

END