| Scalar Object |
| rasDskStatus | .1.3.6.1.4.1.351.110.6.2.1 |
Indicates whether the RAS Disk diagnostics has been
Enabled or not.
|
| dskHealth | .1.3.6.1.4.1.351.110.6.2.2 |
Shows the Status of the Hard Disk, which depends on the
number of corrupted files and number of Bad sectors in
the ASC. The Status is PASS if there are no Corrupted
files in the Disk AND the number of Bad Sectors is within
the threshold value. If the Disk has one or more
Corrupted files OR if the Number of Bad Sectors exceeds
the threshold value, the Status is FAIL. If Diagnostics
is going on, the Status is TestInProgress. Status will be
UNKNOWN until the diagnostics starts for the first time.
|
| standbyDskHealth | .1.3.6.1.4.1.351.110.6.2.3 |
Shows the Status of the Standby ASC Hard Disk, which
depends on the number of corrupted files and number of
Bad sectors in the Standby ASC. The Status is UNKNOWN, if
there is no Standby ASC in the shelf.
|
| wakeupInterval | .1.3.6.1.4.1.351.110.6.2.4 |
Indicates the RAS Disk diagnostics task Wake up time
period, in HOURS. This Interval is configurable between
12 hours and 7 days. If RAS Disk diagnostics is Enabled,
the diagnostics starts whenever the wakeupInterval is
elapsed. If RAS Disk diagnostics is Enabled AND if the
CLI cnfrasdsk is executed, then the Disk diagnostics
starts immediately.
|
| lastTime | .1.3.6.1.4.1.351.110.6.2.5 |
Shows the Time when the RAS Disk diagnostics was
Last done. The format is DD MONTH HH:MM:SS.
|
| numBadSectors | .1.3.6.1.4.1.351.110.6.2.6 |
Indicates the Number of Bad Sectors found in the Disk.
|
| crptdPRIfiles | .1.3.6.1.4.1.351.110.6.2.7 |
Indicates the Number of SM configuration files,
corrupted.
|
| crptdFWfiles | .1.3.6.1.4.1.351.110.6.2.8 |
Indicates the Number of FirmWare files, corrupted.
|
| Object Identifier |
| rasDsk | .1.3.6.1.4.1.351.110.6.2 |