| Scalar Object |
| serialPortNumOfValidEntries | .1.3.6.1.4.1.351.110.4.1.2 |
This object contains number of serial ports.
This identifies the number of entries in
serialInterfacetable. |
| serialInterfaceEntry | .1.3.6.1.4.1.351.110.4.1.1.1 |
An entry for each serial interface.
Each entry contains information on
port type, port speed. |
| Tabular Object |
| serialPortNum | .1.3.6.1.4.1.351.110.4.1.1.1.1 |
This object identifies the serial port number.
The value 1 is used for Console Port.
The Console Port is also known as control port(CP).
The value 2 is used for Maintenance Port
and this can be used as SLIP
(Serial Line Internet Protocol) interface.
The Maintenance Port is also known as
Modem Port(MP). |
| serialPortType | .1.3.6.1.4.1.351.110.4.1.1.1.2 |
This object identifies the type of port.
main(1) : This is applicable for Maintenance Port
debug(2) : This is applicable for Console Port. |
| serialPortEnable | .1.3.6.1.4.1.351.110.4.1.1.1.3 |
This object is used for enabling/disabling
serial port. |
| serialPortbps | .1.3.6.1.4.1.351.110.4.1.1.1.4 |
This object identifies the baud rate of the ports. |
| Table |
| serialInterfaceTable | .1.3.6.1.4.1.351.110.4.1.1 |
This table represents Physical serial interfaces in
the module. |
| Object Identifier |
| basisSerialMIB | .1.3.6.1.4.1.351.150.69 |
The MIB module to configure serial ports
in Processor Module and different Service
Modules(cards) in MGX8850,MGX8250 and MGX8220
ATM Edge switches. |
| serialInterface | .1.3.6.1.4.1.351.110.4.1 |
| basisSerialMIBConformance | .1.3.6.1.4.1.351.150.69.2 |
| basisSerialMIBGroups | .1.3.6.1.4.1.351.150.69.2.1 |
| basisSerialMIBCompliances | .1.3.6.1.4.1.351.150.69.2.2 |
| Group |
| basisSerialConfGroup | .1.3.6.1.4.1.351.150.69.2.1.1 |
The collection of objects which are used to represent
serial ports. |