| Scalar Object |
| rpmIfCnfRscPartEntry | .1.3.6.1.4.1.351.110.5.2.9.2.1.1 |
An entry for resource partition configuration
on a logical interface. A resource partition need
to be configured before connections(or connection endpoints)
can be added to the interface. |
| Tabular Object |
| rpmIfRscSlotNum | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.1 |
This object identifies the slot number of the
RPM card in MGX shelf. |
| rpmIfRscPartIfNum | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.2 |
This is backplane interface number.
Currently there is only one interface and value
1 is the only value supported. |
| rpmIfRscPartCtrlrNum | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.3 |
This object identifies the type of the controller
which owns the resource partition.
par(1) : Portable Auto Route Controller. This is a controller
software implementing Cisco Proprietary protocol
for network routing and topology.
pnni(2): Private Network-to-Network Interface(PNNI)
controller. This is a controller implementing
ATM Forum PNNI protocol for routing.
tag(3) : Tag Switching(MPLS) controller. This is
a controller supporting MPLS protocol. |
| rpmIfRscPrtRowStatus | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.4 |
This object contains the information on whether
subinterface exists or being modified.
add(1) : sub-interface exists
del(2) : sub-interface deleted
mod(2) : sub-interface being modified |
| rpmIfRscPrtIngrPctBandwidth | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.5 |
The percentage of logical interface bandwidth. |
| rpmIfRscPrtEgrPctBandwidth | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.6 |
The percentage of logical interface bandwidth. |
| rpmIfRscPrtVpiLow | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.7 |
The beginning of the VPI range
reserved for this partition. |
| rpmIfRscPrtVpiHigh | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.8 |
The end of the VPI range
reserved for this partition. |
| rpmIfRscPrtVciLow | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.9 |
The beginning of the VCI range reserved
for this partition. This field is only
valid for logical interfaces configured
with a single VPI. |
| rpmIfRscPrtVciHigh | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.10 |
The end of the VCI range reserved
for this partition. This field is
only valid for logical interfaces
configured with a single VPI. |
| rpmIfRscPrtMaxChans | .1.3.6.1.4.1.351.110.5.2.9.2.1.1.11 |
This represents maximum number of
channels(connections) that are available
to the controller. |
| Table |
| rpmIfCnfRscPartTable | .1.3.6.1.4.1.351.110.5.2.9.2.1 |
The table is for RPM interface
resource partition. |
| Object Identifier |
| ciscoMgx82xxRpmRsrcPartMIB | .1.3.6.1.4.1.351.150.61 |
The MIB module to manage resource partition objects.
A resource partition is configured on a RPM subinterface.
An administrator can partition connection related
resources like VPI, VCI ranges, bandwidth and total
amount of available connection entries in the switch
through these MIB tables. |
| rpmIfCnfResPart | .1.3.6.1.4.1.351.110.5.2.9.2 |
| cmrRsrcPartMIBConformance | .1.3.6.1.4.1.351.150.61.3 |
| cmrRsrcPartMIBCompliances | .1.3.6.1.4.1.351.150.61.3.1 |
| cmrRsrcPartMIBGroups | .1.3.6.1.4.1.351.150.61.3.2 |
| Group |
| cmrRsrcPartMIBGroup | .1.3.6.1.4.1.351.150.61.3.2.1 |
The collection of objects related to
configuration of Resource partition. |