SNMP MIB Search

An entry for statistics on logical channel.
Each entry contains statistics for an ATM connection
on broadband interface.

This object identifies the logical channel number.
The value for this object must be same as the value
of 'bbChanCnfNum' from bbChanCnfGrpTable.

CLP_0 Cells Received from broadband interface.

CLP_1 Cells Received from broadband interface.

This object provides a count of the
nonconforming cells that are received at the
first policing point(GCRA1 policer).

This object provides a count of the
nonconforming cells that are received at the
second policing point(GCRA2 policer).

This object provides count of End Of Frame(EOF)
cells that are received.

This object provides a count of the CLP equal to
0 that are received and then discarded.

This object provides a count of the CLP equal to
1 that are received and then discarded.

Number of cells received from broadband interface
and sent out of the Queue Engine(QE device).

This object provides count of Number of cells
with EFCI=0 that are transmitted.

This object provides count of Number of cells
with EFCI set that are transmitted.

Number of CLP = 0 cells discarded before
transmitted to broadband interface.

Number of CLP = 1 cells discarded before
transmitted to broadband interface.

Writing a value of 2 resets all the counters.

This is the broadband channel statistics table.

This MIB module contains ATM Connection related
real time statistical counter objects. The ATM
connections are applicable to PXM1 service module.
in MGX82xx products.
Logical Channel refers to ATM Connection(or connection
end point).
Terminologies used:
broadband interface - Logical port on PXM1.
SCR  - Sustained Cell Rate
BT   - Burst Tolerance
PCR  - Peak Cell Rate
CDVT - Cell Delay Transfer Variance Tolerance
GCRA - The Generic Cell Rate Algorithm(GCRA) is used to
define comformance with repect to the traffic
contract. For each cell arrival, the GCRA determines
whether the cell conforms to the traffic contract
of the connection.
GCRA1 - GCRA  Bucket 1. For CBR and UBR connections, only
GCRA-1 is needed to check for PCR, CDVT Conformance.
GCRA2 - GCRA  Bucket 2. For VBR and ABR Connections, GCRA-1
is needed to check for PCR, CDVT conformance and
GCRA-2 for SCR, BT Conformance.
EFCI - Explicit Forward Congestion Indication.
QE    - Queue Engine(QE).
This ASIC Provides the traffic management functions
related to VC queues, QoS queues and interface
queues. This management function is performed
for both directions of traffic(ingress, egress).
ingress - ingress traffic is defined as data flowing
toward the switch fabric. Ingress data can come
from either the Service Modules through the
backplane or the PXM1 Uplink back card.
egress  - Egress traffic is defined as data flowing
away from the switch fabric.

The objects related to broadband interface
connection statistics.