| Scalar Object |
| cwsSectionAlarmEntry | .1.3.6.1.4.1.351.150.3.1.1.1.1 |
An entry in the alarm table. The entries exist for active sonet
lines, with default threshold values. Thresholds may be configured for
errored seconds(ES), severely errored seconds(SES), severely
errored framing seconds(SEFS) and coding violations(CV) for
section layer sonet lines.
Once these thresholds are exceeded, minor or major alarm is
raised.
Please refer RFC1595 for descriptions of ES,SES,SEFS,CV |
| cwsSectionCurrent24HrEntry | .1.3.6.1.4.1.351.150.3.1.1.2.1 |
An entry in the current 24 hour table. The entries exist for
active sonet lines. |
| cwsSectionPrevious24HrEntry | .1.3.6.1.4.1.351.150.3.1.1.3.1 |
An entry in the current 24 hour table. The entries exist for
active sonet lines. |
| cwsLineAlarmEntry | .1.3.6.1.4.1.351.150.3.1.2.1.1 |
An entry in the SONET/SDH Line Alarm table.
The entries may be created for an
ifType value of sonet(39). Thresholds maybe specified for
errored seconds(ES), severely errored seconds(SES), severely
errored framing seconds(SEFS),coding violations(CV) and
unavailable seconds (UAS) for line layer of sonet lines.
Once these thresholds are exceeded, minor or major alarm is
raised.
Please refer RFC1595 for descriptions of ES,SES,CV,UAS |
| cwsLineCurrent24HrEntry | .1.3.6.1.4.1.351.150.3.1.2.2.1 |
An entry in the current 24 hour table. The entries exist for
active sonet lines. |
| cwsLinePrevious24HrEntry | .1.3.6.1.4.1.351.150.3.1.2.3.1 |
An entry in the current 24 hour table. The entries exist for
active sonet lines. |
| cwsPathAlarmEntry | .1.3.6.1.4.1.351.150.3.1.3.1.1 |
An entry in the SONET/SDH Path Alarm table.
Thresholds maybe specified for
errored seconds(ES), severely errored seconds(SES), severely
errored framing seconds(SEFS),coding violations(CV) and
unavailable seconds (UAS) for path layer of sonet lines.
Once these thresholds are exceeded, minor or major alarm is
raised.
Please refer RFC1595 for descriptions of ES,SES,SEFS,CV,UAS. |
| cwsPathCurrent24HrEntry | .1.3.6.1.4.1.351.150.3.1.3.2.1 |
An entry in path current table. |
| cwsPathPrevious24HrEntry | .1.3.6.1.4.1.351.150.3.1.3.3.1 |
An entry in path current table. |
| Tabular Object |
| cwsSectionStatisticalAlarmSeverity | .1.3.6.1.4.1.351.150.3.1.1.1.1.1 |
By setting this object to major or minor, a minor or major
severity alarm is raised when any statistical threshold
is exceeded. By default TCA crossing does not raise any alarm. |
| cwsSectionCurrentESsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.2 |
This object indicates the threshold for errored seconds(ES),
for the current 15-min interval, above which alarm is generated. |
| cwsSectionTotalESsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.3 |
This object indicates the threshold for errored seconds(ES),
for the 24 hour interval, above which alarm is generated. |
| cwsSectionCurrentSESsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.4 |
This object indicates the threshold for severely errored
seconds(SES) for the current 15-min interval,
above which alarm is generated. |
| cwsSectionTotalSESsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.5 |
This object indicates the threshold for severely errored
seconds(SES) for the 24 hour interval,
above which alarm is generated. |
| cwsSectionCurrentSEFSsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.6 |
This object indicates the threshold for severely errored
framing seconds(SEFS), above which alarm is generated. |
| cwsSectionTotalSEFSsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.7 |
This object indicates the threshold for severely errored
framing seconds(SEFS) for the 24 hour interval,
above which alarm is generated. |
| cwsSectionCurrentCVsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.8 |
This object indicates the threshold for coding violations(CV),
above which alarm is generated. |
| cwsSectionTotalCVsThreshold | .1.3.6.1.4.1.351.150.3.1.1.1.1.9 |
This object indicates the threshold for coding violations(CV)
for 24 hour interval, above which alarm is generated. |
| cwsSectionStatAlarmStatus | .1.3.6.1.4.1.351.150.3.1.1.1.1.10 |
This variable indicates the status of the interface.
When an alarm is raised, this would indicate which threshold
was exceeded. This object is updated every 15-minutes.
Once the current 15-min window has passed,
and there are no errors in the current 15-min window, the
object is cleared from the lower level sonet task.
The cwsSectionStatAlarmStatus is a bit map represented
as a sum, therefore, it can represent multiple defects
simultaneously.
If none of the bits are set, it indicates no defect.
The various bit positions are:
1 sonetSectionTotalESs
2 sonetSectionTotalSESs
3 sonetSectionTotalSEFSs
4 sonetSectionTotalCVs
5 sonetSectionCurrentESs
6 sonetSectionCurrentSESs
7 sonetSectionCurrentSEFSs
8 sonetSectionCurrentCVs |
| cwsSectionCurrent24HrESs | .1.3.6.1.4.1.351.150.3.1.1.2.1.1 |
Number of errored seconds encountered in current 24 hour interval. |
| cwsSectionCurrent24HrSESs | .1.3.6.1.4.1.351.150.3.1.1.2.1.2 |
Number of SESs encountered in current 24 hour interval. |
| cwsSectionCurrent24HrSEFSs | .1.3.6.1.4.1.351.150.3.1.1.2.1.3 |
Number of SEFSs encountered in current 24 hour interval. |
| cwsSectionCurrent24HrCVs | .1.3.6.1.4.1.351.150.3.1.1.2.1.4 |
Number of CVs encountered in current 24 hour interval. |
| cwsSectionPrevious24HrESs | .1.3.6.1.4.1.351.150.3.1.1.3.1.1 |
Number of errored seconds encountered in previous 24 hour interval. |
| cwsSectionPrevious24HrSESs | .1.3.6.1.4.1.351.150.3.1.1.3.1.2 |
Number of SESs encountered in previous 24 hour interval. |
| cwsSectionPrevious24HrSEFSs | .1.3.6.1.4.1.351.150.3.1.1.3.1.3 |
Number of SEFSs encountered in previous 24 hour interval. |
| cwsSectionPrevious24HrCVs | .1.3.6.1.4.1.351.150.3.1.1.3.1.4 |
Number of CVs encountered in previous 24 hour interval. |
| cwsLineStatisticalAlarmSeverity | .1.3.6.1.4.1.351.150.3.1.2.1.1.1 |
By setting this object to major or minor, a minor or major
severity alarm is raised when any statistical threshold
is exceeded. By default TCA crossing does not raise any alarm. |
| cwsLineCurrentESsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.2 |
This object indicates the threshold for errored seconds(ES)
for the current 15-min interval, above which alarm is
generated.
This threshold is the same for Far End and Near End. |
| cwsLineTotalESsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.3 |
This object indicates the threshold for errored seconds(ES)
for the 24 hour interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineCurrentSESsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.4 |
This is the severely errored seconds(SES) threshold
for the current 15-min interval,
above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineTotalSESsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.5 |
This is the severely errored seconds(SES) threshold
for the 24 hour interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineCurrentCVsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.6 |
This is the Coding violations(CV) threshold for the current
15-min interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineTotalCVsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.7 |
This is the Coding violations(CV) threshold for the
24 hour interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineCurrentUASsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.8 |
This is the Unavailable Seconds(UAS) threshold for the current
15-min, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineTotalUASsThreshold | .1.3.6.1.4.1.351.150.3.1.2.1.1.9 |
This is the Unavailable Seconds(UAS) threshold for the
24 hour interval above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsLineStatAlarmStatus | .1.3.6.1.4.1.351.150.3.1.2.1.1.10 |
This variable indicates the status of the sonet line.
This object is updated every 15-minutes.
Once the current 15-min window has passed,
and there are no errors in the current 15-min window, the
object is cleared from the lower level sonet task.
The cwsLineStatAlarmStatus
is a bit map represented as a sum, therefore,
it can represent multiple defects simultaneously.
If none of the bits are set, it indicates no defect.
The various bit-positions are:
1 sonetLineTotalESs
2 sonetLineTotalSESs
3 sonetLineTotalCVs
4 sonetLineTotalUASs
5 sonetLineCurrentESs
6 sonetLineCurrentSESs
7 sonetLineCurrentCVs
8 sonetLineCurrentUASs
9 sonetFarEndLineTotalESs
10 sonetFarEndLineTotalSESs
11 sonetFarEndLineTotalCVs
12 sonetFarEndLineTotalUASs
13 sonetFarEndLineCurrentESs
14 sonetFarEndLineCurrentSESs
15 sonetFarEndLineCurrentCVs
16 sonetFarEndLineCurrentUASs |
| cwsLineCurrent24HrESs | .1.3.6.1.4.1.351.150.3.1.2.2.1.1 |
Number of errored seconds encountered in current 24 hour interval. |
| cwsLineCurrent24HrSESs | .1.3.6.1.4.1.351.150.3.1.2.2.1.2 |
Number of SESs encountered in current 24 hour interval. |
| cwsLineCurrent24HrCVs | .1.3.6.1.4.1.351.150.3.1.2.2.1.3 |
Number of CVs encountered in current 24 hour interval. |
| cwsLineCurrent24HrUASs | .1.3.6.1.4.1.351.150.3.1.2.2.1.4 |
Number of UASs encountered in current 24 hour interval. |
| cwsFELineCurrent24HrESs | .1.3.6.1.4.1.351.150.3.1.2.2.1.5 |
Number of far end errored seconds encountered in current
24 hour interval. |
| cwsFELineCurrent24HrSESs | .1.3.6.1.4.1.351.150.3.1.2.2.1.6 |
Number of far end SESs encountered in current 24 hour interval. |
| cwsFELineCurrent24HrCVs | .1.3.6.1.4.1.351.150.3.1.2.2.1.7 |
Number of far end CVs encountered in current 24 hour interval. |
| cwsFELineCurrent24HrUASs | .1.3.6.1.4.1.351.150.3.1.2.2.1.8 |
Number of far end UASs encountered in current 24 hour interval. |
| cwsLinePrevious24HrESs | .1.3.6.1.4.1.351.150.3.1.2.3.1.1 |
Number of errored seconds encountered in previous 24 hour interval. |
| cwsLinePrevious24HrSESs | .1.3.6.1.4.1.351.150.3.1.2.3.1.2 |
Number of SESs encountered in previous 24 hour interval. |
| cwsLinePrevious24HrCVs | .1.3.6.1.4.1.351.150.3.1.2.3.1.3 |
Number of CVs encountered in previous 24 hour interval. |
| cwsLinePrevious24HrUASs | .1.3.6.1.4.1.351.150.3.1.2.3.1.4 |
Number of UASs encountered in previous 24 hour interval. |
| cwsFELinePrevious24HrESs | .1.3.6.1.4.1.351.150.3.1.2.3.1.5 |
Number of far end errored seconds encountered in previous
24 hour interval. |
| cwsFELinePrevious24HrSESs | .1.3.6.1.4.1.351.150.3.1.2.3.1.6 |
Number of far end SESs encountered in previous 24 hour interval. |
| cwsFELinePrevious24HrCVs | .1.3.6.1.4.1.351.150.3.1.2.3.1.7 |
Number of far end CVs encountered in previous 24 hour interval. |
| cwsFELinePrevious24HrUASs | .1.3.6.1.4.1.351.150.3.1.2.3.1.8 |
Number of far end UASs encountered in previous 24 hour interval. |
| cwsPathStatisticalAlarmSeverity | .1.3.6.1.4.1.351.150.3.1.3.1.1.1 |
By setting this object to major or minor, a minor or major
severity alarm is raised when any statistical threshold
is exceeded. By default TCA crossing does not raise any alarm. |
| cwsPathCurrentESsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.2 |
This object indicates the threshold for errored seconds(ES)
for the current 15-min interval, above which alarm is generated.
This threshold is the same for Far End (remote end
of the line) and Near End(this end of the line). |
| cwsPathTotalESsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.3 |
This object indicates the threshold for errored seconds(ES)
for the 24-hour interval, above which alarm is generated.
This threshold is the same for Far End (remote end
of the line) and Near End(this end of the line). |
| cwsPathCurrentSESsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.4 |
This object indicates the threshold for severely errored
seconds(SES) for the current 15-min interval,
above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsPathTotalSESsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.5 |
This object indicates the threshold for severely errored
seconds(SES) for the 24 hour interval,
above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsPathCurrentCVsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.6 |
This is the coding violations threshold for the current
15-min interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsPathTotalCVsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.7 |
This is the coding violations threshold for the
24 hour interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsPathCurrentUASsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.8 |
This is the unavailable seconds threshold for the current
15-min interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsPathTotalUASsThreshold | .1.3.6.1.4.1.351.150.3.1.3.1.1.9 |
This is the unavailable seconds threshold for the
24 hour interval, above which alarm is generated.
This threshold is the same for Far End and Near End. |
| cwsPathStatAlarmStatus | .1.3.6.1.4.1.351.150.3.1.3.1.1.10 |
This variable indicates the status of the interface.
The cwsPathStatAlarmStatus is a bit map represented
as a sum, therefore, it can represent multiple defects
simultaneously.
If none of the bits are set, it indicates no defect.
The following ar the bit positions:
1 sonetPathTotalESs
2 sonetPathTotalSESs
3 sonetPathTotalCVs
4 sonetPathTotalUASs
5 sonetPathCurrentESs
6 sonetPathCurrentSESs
7 sonetPathCurrentCVs
8 sonetPathCurrentUASs
9 sonetFarEndPathTotalESs
10 sonetFarEndPathTotalSESs
11 sonetFarEndPathTotalCVs
12 sonetFarEndPathTotalUASs
13 sonetFarEndPathCurrentESs
14 sonetFarEndPathCurrentSESs
15 sonetFarEndPathCurrentCVs
16 sonetFarEndPathCurrentUASs |
| cwsPathCurrent24HrESs | .1.3.6.1.4.1.351.150.3.1.3.2.1.1 |
Number of errored seconds encountered in current 24 hour interval. |
| cwsPathCurrent24HrSESs | .1.3.6.1.4.1.351.150.3.1.3.2.1.2 |
Number of SESs encountered in current 24 hour interval. |
| cwsPathCurrent24HrCVs | .1.3.6.1.4.1.351.150.3.1.3.2.1.3 |
Number of CVs encountered in current 24 hour interval. |
| cwsPathCurrent24HrUASs | .1.3.6.1.4.1.351.150.3.1.3.2.1.4 |
Number of UASs encountered in current 24 hour interval. |
| cwsFEPathCurrent24HrESs | .1.3.6.1.4.1.351.150.3.1.3.2.1.5 |
Number of far end errored seconds encountered
in current 24 hour interval. |
| cwsFEPathCurrent24HrSESs | .1.3.6.1.4.1.351.150.3.1.3.2.1.6 |
Number of far end SESs encountered in current 24 hour interval. |
| cwsFEPathCurrent24HrCVs | .1.3.6.1.4.1.351.150.3.1.3.2.1.7 |
Number of far end CVs encountered in current 24 hour interval. |
| cwsFEPathCurrent24HrUASs | .1.3.6.1.4.1.351.150.3.1.3.2.1.8 |
Number of far end UASs encountered in current 24 hour interval. |
| cwsPathPrevious24HrESs | .1.3.6.1.4.1.351.150.3.1.3.3.1.1 |
Number of errored seconds encountered in current 24 hour interval. |
| cwsPathPrevious24HrSESs | .1.3.6.1.4.1.351.150.3.1.3.3.1.2 |
Number of SESs encountered in current 24 hour interval. |
| cwsPathPrevious24HrCVs | .1.3.6.1.4.1.351.150.3.1.3.3.1.3 |
Number of CVs encountered in current 24 hour interval. |
| cwsPathPrevious24HrUASs | .1.3.6.1.4.1.351.150.3.1.3.3.1.4 |
Number of UASs encountered in current 24 hour interval. |
| cwsFEPathPrevious24HrESs | .1.3.6.1.4.1.351.150.3.1.3.3.1.5 |
Number of far end errored seconds encountered
in previous 24 hour interval. |
| cwsFEPathPrevious24HrSESs | .1.3.6.1.4.1.351.150.3.1.3.3.1.6 |
Number of far end SESs encountered in previous 24 hour interval. |
| cwsFEPathPrevious24HrCVs | .1.3.6.1.4.1.351.150.3.1.3.3.1.7 |
Number of far end CVs encountered in previous 24 hour interval. |
| cwsFEPathPrevious24HrUASs | .1.3.6.1.4.1.351.150.3.1.3.3.1.8 |
Number of far end UASs encountered in previous 24 hour interval. |
| Table |
| cwsSectionAlarmTable | .1.3.6.1.4.1.351.150.3.1.1.1 |
The SONET/SDH Section Alarm table. This table contains objects
for setting alarm thresholds and reading alarm severity. |
| cwsSectionCurrent24HrTable | .1.3.6.1.4.1.351.150.3.1.1.2 |
Contains sonet section related current 24 hour counters.
A 24 hour interval starts at twelve midnight with
reference to node time. In case of a manual change
in node time all the counters in cwsSectionCurrent24HrTable
table get reset to 0. |
| cwsSectionPrevious24HrTable | .1.3.6.1.4.1.351.150.3.1.1.3 |
Contains sonet section previous 24 hour counters.
A 24 hour interval starts at twelve midnight with
reference to node time. In case of a manual change
in node time all the counters in cwsSectionPrevious24HrTable
table get reset to 0. |
| cwsLineAlarmTable | .1.3.6.1.4.1.351.150.3.1.2.1 |
The SONET/SDH Line Alarm table. This table contains objects which are
thresholds that the user can set. Once the threshold is exceeded,
an alarm is flagged.Changing any threshold will affect both
the Near End and Far End(remote end of the line) threshold. |
| cwsLineCurrent24HrTable | .1.3.6.1.4.1.351.150.3.1.2.2 |
Contains sonet line related current 24 hour counters.
A 24 hour interval starts at twelve midnight with
reference to node time. In case of a manual change
in node time all the counters in cwsLineCurrent24HrTable
table get reset to 0. |
| cwsLinePrevious24HrTable | .1.3.6.1.4.1.351.150.3.1.2.3 |
Contains sonet line previous 24 hour counters.
A 24 hour interval starts at twelve midnight with
reference to node time. In case of a manual change
in node time all the counters in cwsLinePrevious24HrTable
table get reset to 0. |
| cwsPathAlarmTable | .1.3.6.1.4.1.351.150.3.1.3.1 |
The SONET/SDH Path Alarm table. This table contains objects
for thresholds which a user can set. When any threshold is
exceeded, an alarm is set.
Changing any threshold will affect both the Near End and
Far End(remote end of the line) threshold. |
| cwsPathCurrent24HrTable | .1.3.6.1.4.1.351.150.3.1.3.2 |
Contains sonet path related current 24 hour interval counter.
A 24 hour interval starts at twelve midnight with
reference to node time. In case of a manual change
in node time all the counters in cwsPathCurrent24HrTable
table get reset to 0. |
| cwsPathPrevious24HrTable | .1.3.6.1.4.1.351.150.3.1.3.3 |
Contains sonet path previous 24 hour interval counter.
A 24 hour interval starts at twelve midnight with
reference to node time. In case of a manual change
in node time all the counters in cwsPathPrevious24HrTable
table get reset to 0. |
| Object Identifier |
| ciscoWANSonetMIB | .1.3.6.1.4.1.351.150.3 |
The MIB module to describe SONET/SDH interfaces objects.
This is an extension to the standard SONET MIB(RFC 2558). |
| ciscoWANSonetMIBObjects | .1.3.6.1.4.1.351.150.3.1 |
| cwsSection | .1.3.6.1.4.1.351.150.3.1.1 |
| cwsLine | .1.3.6.1.4.1.351.150.3.1.2 |
| cwsPath | .1.3.6.1.4.1.351.150.3.1.3 |
| ciscoWANSonetMIBConformance | .1.3.6.1.4.1.351.150.3.2 |
| ciscoWANSonetMIBCompliances | .1.3.6.1.4.1.351.150.3.2.1 |
| ciscoWANSonetMIBGroups | .1.3.6.1.4.1.351.150.3.2.2 |
| Group |
| ciscoWANSonetSectAlarmMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.1 |
These are objects related to ciscoSonet alarm group |
| ciscoWANSonetLineAlarmMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.3 |
These are objects related to ciscoSonet line alarm group. |
| ciscoWANSonetPathAlarmMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.7 |
These are objects related to ciscoSonet path alarm group |
| ciscoWANSonetLinePrev24HrMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.5 |
Sonet line previous 24 hour counter objects. |
| ciscoWANSonetFELineAlarmMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.4 |
These are sonet far end line current 24 hour counter
objects. |
| ciscoWANSonetFELinePrev24HrMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.6 |
Far end sonet line previous 24 hour counter objects. |
| ciscoWANSonetPathPrev24HrMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.9 |
Sonet path previous 24 hour counters. |
| ciscoWANSonetFEPathAlarmMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.8 |
These are far end sonet path current 24 hour counter
objects. |
| ciscoWANSonetFEPathPrev24HrMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.10 |
Theses are far end sonet path previous 24 hour counter
objects. |
| ciscoWANSonetSectPrev24HrMIBGroup | .1.3.6.1.4.1.351.150.3.2.2.2 |
Sonet section previous 24 hour counter objects. |