Wellfleet-ATM-LE-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
wfAtmLeGroup
FROM Wellfleet-COMMON-MIB;
wfAtmLecConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfAtmLecConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ATM LEC Interface table - One per LEC Client
This table deals with configuration and operational status"
::= { wfAtmLeGroup 1 }
wfAtmLecConfigEntry OBJECT-TYPE
SYNTAX WfAtmLecConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per LEC Client objects - wfAtmLecCct corresponds to Wellfleet
circuit number "
INDEX { wflecConfigCct }
::= { wfAtmLecConfigTable 1 }
WfAtmLecConfigEntry ::= SEQUENCE {
wflecConfDelete
INTEGER,
wflecRowStatus
INTEGER,
wflecConfigCct
INTEGER,
wflecOwner
DisplayString,
wflecConfigMode
INTEGER,
wflecConfigLanType
INTEGER,
wflecConfigMaxDataFrameSize
INTEGER,
wflecConfigLanName
DisplayString,
wflecConfigLesAtmAddress
OCTET STRING,
wflecControlTimeout
INTEGER,
wflecMaxUnknownFrameCount
INTEGER,
wflecMaxUnknownFrameTime
INTEGER,
wflecVccTimeoutPeriod
INTEGER,
wflecMaxRetryCount
INTEGER,
wflecAgingTime
INTEGER,
wflecForwardDelayTime
INTEGER,
wflecExpectedArpResponseTime
INTEGER,
wflecFlushTimeOut
INTEGER,
wflecPathSwitchingDelay
INTEGER,
wflecLocalSegmentID
INTEGER,
wflecMulticastSendType
INTEGER,
wflecMulticastSendAvgRate
INTEGER,
wflecMulticastSendPeakRate
INTEGER,
wflecConnectionCompleteTimer
INTEGER,
wflecFlushEnable
INTEGER,
wflecConfigRetry
INTEGER,
wflecMulticastFwdTimeout
INTEGER,
wflecMulticastFwdRetry
INTEGER,
wflecDebugLevel
INTEGER,
wflecConfigLECSAtmAddress
OCTET STRING,
wflecConfigV2Capable
INTEGER
}
wflecConfDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to create or delete an ATM LE Client Config Entry
from the MIB "
DEFVAL { created }
::= { wfAtmLecConfigEntry 1 }
wflecRowStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to create or delete an ATM LE Client. This will
remove the LEC from the Emulated LAN. However, the instance is
not removed from the MIB "
DEFVAL { enabled }
::= { wfAtmLecConfigEntry 2 }
wflecConfigCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This corresponds to the Wellfleet circuit number"
::= { wfAtmLecConfigEntry 3 }
wflecOwner OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The entity that configured this entry and is therefore
using the resources assigned to it."
::= { wfAtmLecConfigEntry 4 }
wflecConfigMode OBJECT-TYPE
SYNTAX INTEGER {
autocfg(1),
mancfg(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether this LAN Emulation Client should
auto-configure the next time it is (re)started."
DEFVAL { autocfg }
::= { wfAtmLecConfigEntry 5 }
wflecConfigLanType OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
ieee8023(2),
ieee8025(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C2 - LEC LAN Type
The data frame format which this client will use the
next time it returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
"
DEFVAL { unspecified }
::= { wfAtmLecConfigEntry 6 }
wflecConfigMaxDataFrameSize OBJECT-TYPE
SYNTAX INTEGER {
unspec(1),
size1516(2),
size4544(3),
size9234(4),
size18190(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C3 Maximum Data Frame Size.
The maximum data frame size which this client will
use the next time it returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
lecActualMaxDataFrameSize will be.'"
DEFVAL { unspec }
::= { wfAtmLecConfigEntry 7 }
wflecConfigLanName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C5 ELAN Name.
The ELAN Name this client will use the next time it
returns to the Initial State.
Auto-configuring clients use this parameter in their
Configure requests. Manually-configured clients use
it in their Join requests.
This MIB object will not be overwritten with the new
value from a LE_{JOIN,CONFIGURE}_RESPONSE. Instead,
lecActualMaxDataFrameSize will be.'
"
::= { wfAtmLecConfigEntry 8 }
wflecConfigLesAtmAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C9 LE Server ATM Address.
The LAN Emulation Server which this client will use
the next time it is started in manual configuration
mode.
When lecConfigMode is 'automatic', there is no need
to set this address, and no advantage to doing so.
The client will use the LECS to find a LES, putting
the auto-configured address in lecActualLesAtmAddress
while leaving lecConfigLesAtmAddress alone.
"
::= { wfAtmLecConfigEntry 9 }
wflecControlTimeout OBJECT-TYPE
SYNTAX INTEGER(5..32767)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C7 Control Time-out.
Time out period used for timing out most request/response
control frame most request/response control frame interactions."
DEFVAL { 5 }
::= { wfAtmLecConfigEntry 10 }
wflecMaxUnknownFrameCount OBJECT-TYPE
SYNTAX INTEGER(0..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C10 Maximum Unknown Frame Count. This parameter MUST be less than
or equal to 10. (See parameter C11) "
DEFVAL { 1 }
::= { wfAtmLecConfigEntry 11 }
wflecMaxUnknownFrameTime OBJECT-TYPE
SYNTAX INTEGER(1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C11 Maximum Unknown Frame Time. This parameter MUST be greater
than or equal to 1.0 seconds. Within the period of time defined by
the Maximum Unknown Frame Time, a LE Client will send no more than
Maximum Unknown Frame Count frames to a given MAC address or Route
Designator without also initiating the address resolution protocol to
resolve that MAC address or Route Designator. This time value is
expressed in seconds. "
DEFVAL { 1 }
::= { wfAtmLecConfigEntry 12 }
wflecVccTimeoutPeriod OBJECT-TYPE
SYNTAX INTEGER {
vcctmodef(1200)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C12 VCC Timeout Period.
A LE Client may release any Data Direct or Multicast Send VCC that it
has not used to transmit or receive any data frames for the length of
the VCC Timeout Period. This time value is expressed in seconds. "
DEFVAL { vcctmodef }
::= { wfAtmLecConfigEntry 13 }
wflecMaxRetryCount OBJECT-TYPE
SYNTAX INTEGER(0..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a
given frame's LAN destination more than Maximum Retry Count times,
after which it must discard the frame."
DEFVAL { 1 }
::= { wfAtmLecConfigEntry 14 }
wflecAgingTime OBJECT-TYPE
SYNTAX INTEGER(10..300)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C17 Aging Time. The maximum time that a LE Client will maintain
an entry in its LE-ARP cache in the absence of a verification of that
relationship."
DEFVAL { 300 }
::= { wfAtmLecConfigEntry 15 }
wflecForwardDelayTime OBJECT-TYPE
SYNTAX INTEGER(4..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C18 Forward Delay Time. The maximum time that a LE Client will
maintain an entry in its LE-ARP cache in the absence of a verification
of that relationship, so long as the Topology Change flag C19 is true."
DEFVAL { 15 }
::= { wfAtmLecConfigEntry 16 }
wflecExpectedArpResponseTime OBJECT-TYPE
SYNTAX INTEGER(1..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C20 Expected LE_ARP Reponse Time. The maximum time (seconds)
that the LEC expects an LE_ARP_REQUEST/
LE_ARP_RESPONSE cycle to take. Used for retries
and verifies. "
DEFVAL { 3 }
::= { wfAtmLecConfigEntry 17 }
wflecFlushTimeOut OBJECT-TYPE
SYNTAX INTEGER(1..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C21 Flush Time-out. Time limit (seconds) to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
been sent before taking recovery action."
DEFVAL { 4 }
::= { wfAtmLecConfigEntry 18 }
wflecPathSwitchingDelay OBJECT-TYPE
SYNTAX INTEGER(1..8)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C22 Path Switching Delay. The time (seconds) since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol."
DEFVAL { 6 }
::= { wfAtmLecConfigEntry 19 }
wflecLocalSegmentID OBJECT-TYPE
SYNTAX INTEGER(0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C23 Local Segment ID. The segment ID of the emulated
LAN. This is only required for IEEE 802.5 clients
that are Source Routing bridges.'"
::= { wfAtmLecConfigEntry 20 }
wflecMulticastSendType OBJECT-TYPE
SYNTAX INTEGER {
abr(1),
vbr(2),
cbr(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C24 Multicast Send VCC Type. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
This is the method to be used by the LE Client
when specifying traffic parameters when it sets
up the Multicast Send VCC for this emulated LAN."
DEFVAL { cbr }
::= { wfAtmLecConfigEntry 21 }
wflecMulticastSendAvgRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C25 Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Sustained Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.
"
::= { wfAtmLecConfigEntry 22 }
wflecMulticastSendPeakRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C26 Multicast Send VCC PeakRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Peak Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.
"
::= { wfAtmLecConfigEntry 23 }
wflecConnectionCompleteTimer OBJECT-TYPE
SYNTAX INTEGER(1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"C28 Connection Complete Timer. Optional. In
Connection Establishment this is the time period
in which data or a READY_IND message is expected
from a Calling Party."
DEFVAL { 4 }
::= { wfAtmLecConfigEntry 24 }
wflecFlushEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Flush Protocol enable/disable -
ATM_LEC_FLUSH_ENABLED - ATM LE flush protocol is used when switching VCs.
If the Flush timeout (wflecFlushTimeOut) expires data for that MAC address
will start flowing over the old VC again.
ATM_LEC_FLUSH_DISABLED - ATM LE flush protocol is not used. Instead data
for that MAC address will automatically start flowing over the new VC once
the Path Switching delay timeout (wflecPathSwitchingDelay) has expired."
DEFVAL { enabled }
::= { wfAtmLecConfigEntry 25 }
wflecConfigRetry OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute specifies how many retries should be attempted if any
part of the config phase fails. The config phase starts with setting
up the config direct VC and ends when a JOIN response is received.
The default is 0 which means retry forever with a maximum timeout of
30 seconds between each retry. The time between each retry will start
at 2 seconds and double from that point (never exceeding 30 seconds)."
::= { wfAtmLecConfigEntry 26 }
wflecMulticastFwdTimeout OBJECT-TYPE
SYNTAX INTEGER {
mcsfwdtmodef(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The attribute specifies how many seconds to wait for the Multicast Forward
VC to be set up before retrying. The retry will include closing the
Multicast Send VC (if it has been opened) and reARPing for the BUS. A
successful ARP response will result in the setup of the Multicast Send which
in turn should result in the BUS setting up the Multicast Forward VC."
DEFVAL { mcsfwdtmodef }
::= { wfAtmLecConfigEntry 27 }
wflecMulticastFwdRetry OBJECT-TYPE
SYNTAX INTEGER {
mcsfwdrtrydef(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The attribute specifies how many retries should be made to get the
Multicast Forward VC setup. The LEC will retry after
wflecMulticastFwdTimeout seconds and will double this timeout for each
each retry which follows. The timeout will not exeed 30 seconds however.
After wflecMulticastFwdRetry retries, the LEC will restart itself. If
wflecMulticastFwdRetry is set to 0 it will retry the BUS phase forever
and will never restart itself."
DEFVAL { mcsfwdrtrydef }
::= { wfAtmLecConfigEntry 28 }
wflecDebugLevel OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Debug Levels - The level of debug desired from the Portable LEC code
LEC_DBG_OFF - 0
LEC_DBG_WARN - 1
LEC_DBG_ERR - 2
LEC_DBG_MSG - 4
LEC_DBG_DBG - 8
LEC_DBG_VERBOSE - 16
This values above can be used separately, or OR'd together for
a combination of debug levels. For example, to see both WARN and
ERR messages, LEC_DBG_WARN OR LEC_DBG_ERR = 3, so set this object
to 3."
DEFVAL { 0 }
::= { wfAtmLecConfigEntry 29 }
wflecConfigLECSAtmAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The LE Config Server Address to be used. If left (or set) to NULL_VAL the
well-known LECS ATM address will be used."
::= { wfAtmLecConfigEntry 30 }
wflecConfigV2Capable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to enable or disable LANE V2 support for
this ATM LE Client."
DEFVAL { disabled }
::= { wfAtmLecConfigEntry 31 }
wfAtmLecStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfAtmLecStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Lan Emulation Status Group
Read-only table containing identification, status, and operational
information about the LAN Emulation Clients this agent manages "
::= { wfAtmLeGroup 2 }
wfAtmLecStatusEntry OBJECT-TYPE
SYNTAX WfAtmLecStatusEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per LEC Client objects - wfAtmLecCct corresponds to Wellfleet
circuit number "
INDEX { wflecStatusCct }
::= { wfAtmLecStatusTable 1 }
WfAtmLecStatusEntry ::= SEQUENCE {
wflecStatusCct
INTEGER,
wflecPrimaryAtmAddress
OCTET STRING,
wflecID
INTEGER,
wflecInterfaceState
INTEGER,
wflecLastFailureRespCode
INTEGER,
wflecLastFailureState
INTEGER,
wflecProtocol
INTEGER,
wflecVersion
INTEGER,
wflecTopologyChange
INTEGER,
wflecConfigServerAtmAddress
OCTET STRING,
wflecConfigSource
INTEGER,
wflecActualLanType
INTEGER,
wflecActualMaxDataFrameSize
INTEGER,
wflecActualLanName
DisplayString,
wflecActualLesAtmAddress
OCTET STRING,
wflecProxyClient
INTEGER
}
wflecStatusCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This corresponds to the Wellfleet circuit number"
::= { wfAtmLecStatusEntry 1 }
wflecPrimaryAtmAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C1 - LE Client's ATM Address."
::= { wfAtmLecStatusEntry 2 }
wflecID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C14 LE Client Identifier. Each LE Client requires a
LE Client Identifier (LECID) assigned by the LE
Server during the Join phase. The LECID is placed
in control requests by the LE Client and MAY be
used for echo suppression on multicast data frames
sent by that LE Client. This value MUST NOT
change without terminating the LE Client and
returning to the Initial state. A valid LECID
MUST be in the range X'0001' through X'FEFF'.
The value of this object is only meaningful for a LEC
that is connected to a LES. For a LEC which does not
belong to an emulated LAN, the value of this object
is defined to be 0.'"
::= { wfAtmLecStatusEntry 3 }
wflecInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
initial(1),
lecsconnect(2),
configure(3),
join(4),
reg(5),
busconnect(6),
operational(7)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the state for the LE Client"
::= { wfAtmLecStatusEntry 4 }
wflecLastFailureRespCode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
tmo(2),
undef(3),
vrsnotsup(4),
invreq(5),
dupdst(6),
dupatmadr(7),
insufres(8),
accdenied(9),
invreqid(10),
invdst(11),
invatmadr(12),
nocfg(13),
lecfgerr(14),
insufinfo(15)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Failure response code.
Status code from the last failed Configure response
or Join response. Failed responses are those for
which the LE_CONFIGURE_RESPONSE / LE_JOIN_RESPONSE
frame contains a non-zero code, or fails to arrive
within a timeout period.
If none of this client's requests have failed, this
object has the value 'none'.
If the failed response contained a STATUS code that
is not defined in the LAN Emulation specification,
this object has the value 'undefinedError'.
The value 'timeout' is self-explanatory.
Other failure codes correspond to those defined in
the specification, although they may have different
numeric values."
DEFVAL { none }
::= { wfAtmLecStatusEntry 5 }
wflecLastFailureState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Last failure state
The state this client was in when it updated the
'lecLastFailureRespCode'.
If 'lecLastFailureRespCode' is 'none', this object
has the value initialState(1)."
::= { wfAtmLecStatusEntry 6 }
wflecProtocol OBJECT-TYPE
SYNTAX INTEGER {
prot1(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The LAN Emulation protocol which this client supports,
and specifies in its LE_JOIN_REQUESTs. "
DEFVAL { prot1 }
::= { wfAtmLecStatusEntry 7 }
wflecVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The LAN Emulation protocol version which this client supports,
and specifies in its LE_JOIN_REQUESTs. "
::= { wfAtmLecStatusEntry 8 }
wflecTopologyChange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C19 Topology Change. Boolean indication that the LE Client is
using the Forward Delay Time C18, instead of the Ageing Time C17, to
age entries in its LE-ARP cache."
::= { wfAtmLecStatusEntry 9 }
wflecConfigServerAtmAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ATM address of the LECS for this Client"
::= { wfAtmLecStatusEntry 10 }
wflecConfigSource OBJECT-TYPE
SYNTAX INTEGER {
viailmi(1),
knownadr(2),
cfgpvc(3),
nolecs(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether this LAN Emulation Client used the
LAN Emulation Configuration Server, and, if so, what
method it used to establish the Configuration Direct
VCC."
DEFVAL { nolecs }
::= { wfAtmLecStatusEntry 11 }
wflecActualLanType OBJECT-TYPE
SYNTAX INTEGER {
unspecified(1),
ieee8023(2),
ieee8025(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C2 - LEC LAN Type
The data frame format that this LAN Emulation Client
is using right now. This may come from
lecConfigLanType,
the LAN Emulation Configuration Server, or
the LAN Emulation Server"
::= { wfAtmLecStatusEntry 12 }
wflecActualMaxDataFrameSize OBJECT-TYPE
SYNTAX INTEGER {
unspec(1),
size1516(2),
size4544(3),
size9234(4),
size18190(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C3 Maximum Data Frame Size.
The maximum data frame size that this LAN Emulation
client is using right now. This may come from
lecConfigLanType,
the LAN Emulation Configuration Server, or
the LAN Emulation Server
"
::= { wfAtmLecStatusEntry 13 }
wflecActualLanName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C5 ELAN Name.
The identity of the emulated LAN which this client
last joined, or wishes to join. This may come from
lecConfigLanType,
the LAN Emulation Configuration Server, or
the LAN Emulation Server"
::= { wfAtmLecStatusEntry 14 }
wflecActualLesAtmAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C9 LE Server ATM Address.
The LAN Emulation Server address currently in use or
most recently attempted.
If no LAN Emulation Server attachment has been tried,
this object's value is the zero-length string.'
"
::= { wfAtmLecStatusEntry 15 }
wflecProxyClient OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C4 Proxy
When a client joins an ATM emulated LAN, it indicates
whether it wants to act as a proxy.
Proxy clients are allowed to represent unregistered
MAC addresses, and receive copies of LE_ARP_REQUEST
frames for such addresses.'"
::= { wfAtmLecStatusEntry 16 }
wfAtmLecOperConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfAtmLecOperConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"ATM LEC Interface table - One per LEC Client
This table deals with configuration and operational status"
::= { wfAtmLeGroup 3 }
wfAtmLecOperConfigEntry OBJECT-TYPE
SYNTAX WfAtmLecOperConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per LEC Operation Config objects - wfAtmLecOperConfigCct corresponds to
Wellfleet circuit number "
INDEX { wflecOperConfigCct }
::= { wfAtmLecOperConfigTable 1 }
WfAtmLecOperConfigEntry ::= SEQUENCE {
wflecOperConfigCct
INTEGER,
wflecOperConfigControlTimeout
INTEGER,
wflecOperConfigMaxUnknownFrameCount
INTEGER,
wflecOperConfigMaxUnknownFrameTime
INTEGER,
wflecOperConfigVccTimeoutPeriod
INTEGER,
wflecOperConfigMaxRetryCount
INTEGER,
wflecOperConfigAgingTime
INTEGER,
wflecOperConfigForwardDelayTime
INTEGER,
wflecOperConfigTopologyChange
INTEGER,
wflecOperConfigExpectedArpResponseTime
INTEGER,
wflecOperConfigFlushTimeOut
INTEGER,
wflecOperConfigPathSwitchingDelay
INTEGER,
wflecOperConfigLocalSegmentID
INTEGER,
wflecOperConfigMulticastSendType
INTEGER,
wflecOperConfigMulticastSendAvgRate
INTEGER,
wflecOperConfigMulticastSendPeakRate
INTEGER,
wflecOperConfigConnectionCompleteTimer
INTEGER
}
wflecOperConfigCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This corresponds to the Wellfleet circuit number"
::= { wfAtmLecOperConfigEntry 1 }
wflecOperConfigControlTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C7 Control Time-out.
Time out period used for timing out most request/response
control frame most request/response control frame interactions."
::= { wfAtmLecOperConfigEntry 2 }
wflecOperConfigMaxUnknownFrameCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C10 Maximum Unknown Frame Count. This parameter MUST be less than
or equal to 10. (See parameter C11) "
::= { wfAtmLecOperConfigEntry 3 }
wflecOperConfigMaxUnknownFrameTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C11 Maximum Unknown Frame Time. This parameter MUST be greater
than or equal to 1.0 seconds. Within the period of time defined by
the Maximum Unknown Frame Time, a LE Client will send no more than
Maximum Unknown Frame Count frames to a given MAC address or Route
Designator without also initiating the address resolution protocol to
resolve that MAC address or Route Designator. This time value is
expressed in seconds. "
::= { wfAtmLecOperConfigEntry 4 }
wflecOperConfigVccTimeoutPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C12 VCC Timeout Period.
A LE Client may release any Data Direct or Multicast Send VCC that it
has not used to transmit or receive any data frames for the length of
the VCC Timeout Period. This time value is expressed in seconds. "
::= { wfAtmLecOperConfigEntry 5 }
wflecOperConfigMaxRetryCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C13 Maximum Retry Count. A LE CLient MUST not retry a LE-ARP for a
given frame's LAN destination more than Maximum Retry Count times,
after which it must discard the frame."
::= { wfAtmLecOperConfigEntry 6 }
wflecOperConfigAgingTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C17 Aging Time. The maximum time that a LE Client will maintain
an entry in its LE-ARP cache in the absence of a verification of that
relationship."
::= { wfAtmLecOperConfigEntry 7 }
wflecOperConfigForwardDelayTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C18 Forward Delay Time. The maximum time that a LE Client will
maintain an entry in its LE-ARP cache in the absence of a verification
of that relationship, so long as the Topology Change flag C19 is true."
::= { wfAtmLecOperConfigEntry 8 }
wflecOperConfigTopologyChange OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C19 Topology Change. Boolean indication that the LE Client is
using the Forward Delay Time C18, instead of the Ageing Time C17, to
age entries in its LE-ARP cache."
::= { wfAtmLecOperConfigEntry 9 }
wflecOperConfigExpectedArpResponseTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C20 Expected LE_ARP Reponse Time. The maximum time (seconds)
that the LEC expects an LE_ARP_REQUEST/
LE_ARP_RESPONSE cycle to take. Used for retries
and verifies. "
::= { wfAtmLecOperConfigEntry 10 }
wflecOperConfigFlushTimeOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C21 Flush Time-out. Time limit (seconds) to wait to receive a
LE_FLUSH_RESPONSE after the LE_FLUSH_REQUEST has
been sent before taking recovery action."
::= { wfAtmLecOperConfigEntry 11 }
wflecOperConfigPathSwitchingDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C22 Path Switching Delay. The time (seconds) since sending a
frame to the BUS after which the LE Client may
assume that the frame has been either discarded
or delivered to the recipient. May be used to
bypass the Flush protocol."
::= { wfAtmLecOperConfigEntry 12 }
wflecOperConfigLocalSegmentID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C23 Local Segment ID. The segment ID of the emulated
LAN. This is only required for IEEE 802.5 clients
that are Source Routing bridges.'"
::= { wfAtmLecOperConfigEntry 13 }
wflecOperConfigMulticastSendType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C24 Multicast Send VCC Type. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
This is the method to be used by the LE Client
when specifying traffic parameters when it sets
up the Multicast Send VCC for this emulated LAN."
::= { wfAtmLecOperConfigEntry 14 }
wflecOperConfigMulticastSendAvgRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C25 Multicast Send VCC AvgRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Sustained Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.
"
::= { wfAtmLecOperConfigEntry 15 }
wflecOperConfigMulticastSendPeakRate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C26 Multicast Send VCC PeakRate. Signalling parameter
that SHOULD be used by the LE Client when
establishing the Multicast Send VCC.
Forward and Backward Peak Cell Rate to be
requested by LE Client when setting up Multicast
Send VCC, if using Variable bit rate codings.
"
::= { wfAtmLecOperConfigEntry 16 }
wflecOperConfigConnectionCompleteTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"C28 Connection Complete Timer. Optional. In
Connection Establishment this is the time period
in which data or a READY_IND message is expected
from a Calling Party."
::= { wfAtmLecOperConfigEntry 17 }
wfAtmLecStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfAtmLecStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of statistics"
::= { wfAtmLeGroup 4 }
wfAtmLecStatisticsEntry OBJECT-TYPE
SYNTAX WfAtmLecStatisticsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry contains statistics for each LEC"
INDEX { wflecStatisticsCct }
::= { wfAtmLecStatisticsTable 1 }
WfAtmLecStatisticsEntry ::= SEQUENCE {
wflecArpRequestsOut
Counter,
wflecArpRequestsIn
Counter,
wflecArpRepliesOut
Counter,
wflecArpRepliesIn
Counter,
wflecControlFramesOut
Counter,
wflecControlFramesIn
Counter,
wflecSvcFailures
Counter,
wflecStatisticsCct
INTEGER,
wflecUnknownFramesDropped
Counter,
wflecInDataFrames
Counter,
wflecInUnicastFrames
Counter,
wflecInUnicastOctets
Counter,
wflecInMulticastFrames
Counter,
wflecInMulticastOctets
Counter,
wflecInBroadcastFrames
Counter,
wflecInBroadcastOctets
Counter,
wflecOutDataFrames
Counter,
wflecOutUnknownFrames
Counter,
wflecOutUnknownOctets
Counter,
wflecOutMulticastFrames
Counter,
wflecOutMulticastOctets
Counter,
wflecOutBroadcastFrames
Counter,
wflecOutBroadcastOctets
Counter,
wflecOutUnicastFrames
Counter,
wflecOutUnicastOctets
Counter
}
wflecArpRequestsOut OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MAC-to-ATM ARP requests made by this
LAN Emulation client over the LUNI associated with
this emulated packet interface."
::= { wfAtmLecStatisticsEntry 1 }
wflecArpRequestsIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MAC-to-ATM ARP requests received by
this LAN Emulation client over the LUNI associated
with this emulated packet interface.
Requests may arrive on the Control Direct VCC or on
the Control Distribute VCC, depending upon how the
LES is implemented and the chances it has had for
learning. This counter covers both VCCs."
::= { wfAtmLecStatisticsEntry 2 }
wflecArpRepliesOut OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MAC-to-ATM ARP replies sent by this
LAN Emulation client over the LUNI associated with
this emulated packet interface."
::= { wfAtmLecStatisticsEntry 3 }
wflecArpRepliesIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of MAC-to-ATM ARP replies received by
this LAN Emulation client over the LUNI associated
with this emulated packet interface. This count
includes all such replies, whether solicited or not.
Replies may arrive on the Control Direct VCC or on
the Control Distribute VCC, depending upon how the
LES is implemented. This counter covers both VCCs."
::= { wfAtmLecStatisticsEntry 4 }
wflecControlFramesOut OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of control packets sent by this
LAN Emulation client over the LUNI associated with
this emulated packet interface."
::= { wfAtmLecStatisticsEntry 5 }
wflecControlFramesIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of control packets received by this
LAN Emulation client over the LUNI associated with
this emulated packet interface"
::= { wfAtmLecStatisticsEntry 6 }
wflecSvcFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of SVCs which this client tried to, but failed to, open."
::= { wfAtmLecStatisticsEntry 7 }
wflecStatisticsCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This corresponds to the Wellfleet circuit number"
::= { wfAtmLecStatisticsEntry 8 }
wflecUnknownFramesDropped OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of frames that have been dropped due to unknown frame pacing."
::= { wfAtmLecStatisticsEntry 9 }
wflecInDataFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 10 }
wflecInUnicastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 11 }
wflecInUnicastOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 12 }
wflecInMulticastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 13 }
wflecInMulticastOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 14 }
wflecInBroadcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 15 }
wflecInBroadcastOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 16 }
wflecOutDataFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 17 }
wflecOutUnknownFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 18 }
wflecOutUnknownOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 19 }
wflecOutMulticastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 20 }
wflecOutMulticastOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 21 }
wflecOutBroadcastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 22 }
wflecOutBroadcastOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 23 }
wflecOutUnicastFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 24 }
wflecOutUnicastOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
""
::= { wfAtmLecStatisticsEntry 25 }
wfAtmLecServerVccTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfAtmLecServerVccEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Lan Emulation Client - Server VCC Table"
::= { wfAtmLeGroup 5 }
wfAtmLecServerVccEntry OBJECT-TYPE
SYNTAX WfAtmLecServerVccEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry contains statistics for each LEC"
INDEX { wflecServerVccCct }
::= { wfAtmLecServerVccTable 1 }
WfAtmLecServerVccEntry ::= SEQUENCE {
wflecConfigDirectInterface
INTEGER,
wflecConfigDirectVpi
INTEGER,
wflecConfigDirectVci
INTEGER,
wflecControlDirectInterface
INTEGER,
wflecControlDirectVpi
INTEGER,
wflecControlDirectVci
INTEGER,
wflecControlDistributeInterface
INTEGER,
wflecControlDistributeVpi
INTEGER,
wflecControlDistributeVci
INTEGER,
wflecMulticastSendInterface
INTEGER,
wflecMulticastSendVpi
INTEGER,
wflecMulticastSendVci
INTEGER,
wflecMulticastForwardInterface
INTEGER,
wflecMulticastForwardVpi
INTEGER,
wflecMulticastForwardVci
INTEGER,
wflecServerVccCct
INTEGER
}
wflecConfigDirectInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface associated with the Configuration Direct VCC. If no
Configuration Direct VCC exists, this object has the value 0. Otherwise,
the objects
( wflecConfigDirectInterface,
wflecConfigDirectVPI, wflecConfigDirectVCI )
identify the circuit"
::= { wfAtmLecServerVccEntry 1 }
wflecConfigDirectVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Configuration Direct VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 2 }
wflecConfigDirectVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Configuration Direct VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 3 }
wflecControlDirectInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface associated with the Control Direct VCC. If no
Control Direct VCC exists, this object has the value 0. Otherwise,
the objects
( wflecControlDirectInterface,
wflecControlDirectVPI, wflecControlDirectVCI )
identify the circuit"
::= { wfAtmLecServerVccEntry 4 }
wflecControlDirectVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Control Direct VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 5 }
wflecControlDirectVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Control Direct VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 6 }
wflecControlDistributeInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface associated with the Control Distribute VCC. If no
Control Distribute VCC exists, this object has the value 0. Otherwise,
the objects
( wflecControlDistributeInterface,
wflecControlDistributeVPI, wflecControlDistributeVCI )
identify the circuit"
::= { wfAtmLecServerVccEntry 7 }
wflecControlDistributeVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Control Distribute VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 8 }
wflecControlDistributeVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Control Distribute VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 9 }
wflecMulticastSendInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface associated with the Multicast Send VCC. If no
Multicast Send VCC exists, this object has the value 0. Otherwise,
the objects
( wflecMulticastSendInterface,
wflecMulticastSendVPI, wflecMulticastSendVCI )
identify the circuit"
::= { wfAtmLecServerVccEntry 10 }
wflecMulticastSendVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Multicast Send VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 11 }
wflecMulticastSendVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Multicast Send VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 12 }
wflecMulticastForwardInterface OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The interface associated with the Multicast Forward VCC. If no
Multicast Forward VCC exists, this object has the value 0. Otherwise,
the objects
( wflecMulticastForwardInterface,
wflecMulticastForwardVPI, wflecMulticastForwardVCI )
identify the circuit"
::= { wfAtmLecServerVccEntry 13 }
wflecMulticastForwardVpi OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Multicast Forward VCC exists, this object contains the VPI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 14 }
wflecMulticastForwardVci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If the Multicast Forward VCC exists, this object contains the VCI
which identifies that VCC at the point where it connects to this LE
client. Otherwise, this object has the value 0."
::= { wfAtmLecServerVccEntry 15 }
wflecServerVccCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This corresponds to the Wellfleet circuit number"
::= { wfAtmLecServerVccEntry 16 }
wfAtmLecAtmAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfAtmLecAtmAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"LAN Emulation Client - ATM Addresses table"
::= { wfAtmLeGroup 6 }
wfAtmLecAtmAddressEntry OBJECT-TYPE
SYNTAX WfAtmLecAtmAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Entry contains ATM address for a LE CLient"
INDEX { wflecAtmAddressCct,
wflecAtmAddress }
::= { wfAtmLecAtmAddressTable 1 }
WfAtmLecAtmAddressEntry ::= SEQUENCE {
wflecAtmAddress
OCTET STRING,
wflecAtmAddressStatus