Wellfleet-FRSW-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress, Counter, TimeTicks, Gauge
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
wfFrswGroup
FROM Wellfleet-COMMON-MIB;
wfFrSwDlcmiTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwDlcmiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Parameters for the Data Link Connection
Management Interface corresponding to any
interface. Incorporates the Error table."
::= { wfFrswGroup 1 }
wfFrSwDlcmiEntry OBJECT-TYPE
SYNTAX WfFrSwDlcmiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The parameters for a particular Data Link Connection
Management Interface."
INDEX { wfFrSwDlcmiCircuit }
::= { wfFrSwDlcmiTable 1 }
WfFrSwDlcmiEntry ::= SEQUENCE {
wfFrSwDlcmiDelete
INTEGER,
wfFrSwDlcmiState
INTEGER,
wfFrSwDlcmiNniEnable
INTEGER,
wfFrSwDlcmiCircuit
INTEGER,
wfFrSwDlcmiManagementType
INTEGER,
wfFrSwL3NetAddress
IpAddress,
wfFrSwDlcmiAddressLen
INTEGER,
wfFrSwDlcmiControlByteDisable
INTEGER,
wfFrSwDlcmiPollingInterval
INTEGER,
wfFrSwDlcmiFullEnquiryInterval
INTEGER,
wfFrSwDlcmiErrorThreshold
INTEGER,
wfFrSwDlcmiMonitoredEvents
INTEGER,
wfFrSwDlcmiRecoveryCounts
INTEGER,
wfFrSwDlcmiMaxSupportedVCs
INTEGER,
wfFrSwDlcmiVCsInUse
INTEGER,
wfFrSwSwitchHdrErrors
Counter,
wfFrSwDlcmiSequenceCount
INTEGER,
wfFrSwDlcmiLastReceived
INTEGER,
wfFrSwDlcmiActiveSeqCount
INTEGER,
wfFrSwDlcmiActiveReceived
INTEGER,
wfFrSwDlcmiPolls
Counter,
wfFrSwDlcmiAlarmTimer
INTEGER,
wfFrSwErrType
INTEGER,
wfFrSwErrData
OCTET STRING,
wfFrSwErrTime
TimeTicks,
wfFrSwBcMeasurementInterval
INTEGER,
wfFrSwDlcmiMcastNoBufferErrors
Counter,
wfFrSwDlcmiFrameTooShortErrors
Counter,
wfFrSwDlcmiFrameTooLongErrors
Counter,
wfFrSwDlcmiIllegalDlciErrors
Counter,
wfFrSwDlcmiUnknownDlciErrors
Counter,
wfFrSwDlcmiProtocolErrors
Counter,
wfFrSwDlcmiUnknownIEErrors
Counter,
wfFrSwDlcmiSequenceErrors
Counter,
wfFrSwDlcmiUnknownRPTErrors
Counter,
wfFrSwDlcmiControlByteErrors
Counter,
wfFrSwDlcmiFormatErrors
Counter,
wfFrSwDlcmiOtherErrors
Counter,
wfFrSwDlcmiStatus
INTEGER,
wfFrSwDlcmiNewVCs
Counter,
wfFrSwDlcmiDeletedVCs
Counter,
wfFrSwDlcmiFullStatusSeq
Counter,
wfFrSwDlcmiBidirect
INTEGER,
wfFrSwDlcmiDteStatus
INTEGER,
wfFrSwDlcmiDteSeqCount
INTEGER,
wfFrSwDlcmiDteReceived
INTEGER,
wfFrSwDlcmiDteLastReceived
INTEGER,
wfFrSwDlcmiDtePolls
Counter,
wfFrSwDlcmiDtePollingInterval
INTEGER,
wfFrSwDlcmiDteFullEnquiryInterval
INTEGER,
wfFrSwDlcmiDteErrorThreshold
INTEGER,
wfFrSwDlcmiCrossNetEnable
INTEGER,
wfFrSwDlcmiCrossNetPollingInterval
INTEGER,
wfFrSwDlcmiCrossNetErrorThreshold
INTEGER,
wfFrSwDlcmiCrossNetAsyncUpdateEnable
INTEGER,
wfFrSwDlcmiBcMeasurementEnable
INTEGER,
wfFrSwDlcmiAsyncUpdateEnable
INTEGER,
wfFrSwDlcmiCrossNetListenEnable
INTEGER,
wfFrSwDlcmiSvcDisable
INTEGER,
wfFrSwDlcmiL2AddrType
INTEGER,
wfFrSwDlcmiEscapeMode
INTEGER,
wfFrSwDlcmiEscapeCircuit
INTEGER,
wfFrSwDlcmiEscapeVcCount
INTEGER,
wfFrSwDlcmiIwfMode
INTEGER,
wfFrSwDlcmiSvcBillingEnable
INTEGER,
wfFrSwDlcmiSpvcAgent
INTEGER,
wfFrSwDlcmiCallAccDlciSelectionType
INTEGER
}
wfFrSwDlcmiDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this frame relay interface."
DEFVAL { created }
::= { wfFrSwDlcmiEntry 1 }
wfFrSwDlcmiState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates which state of DLCMI the interface is in"
DEFVAL { init }
::= { wfFrSwDlcmiEntry 2 }
wfFrSwDlcmiNniEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether a NNI is enabled for this entry."
DEFVAL { disabled }
::= { wfFrSwDlcmiEntry 3 }
wfFrSwDlcmiCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier; the circuit number of this entry."
::= { wfFrSwDlcmiEntry 4 }
wfFrSwDlcmiManagementType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
lmi(2),
t1617d(3),
t1617b(4),
annexa(5),
lmiswitch(6),
annexdswitch(7),
annexaswitch(8),
iwfoamenabled(9),
iwfoamdisabled(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the Data Link Connection Management scheme
that is active."
DEFVAL { t1617d }
::= { wfFrSwDlcmiEntry 5 }
wfFrSwL3NetAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates level 3 (IP) address of this frame relay interface"
::= { wfFrSwDlcmiEntry 6 }
wfFrSwDlcmiAddressLen OBJECT-TYPE
SYNTAX INTEGER {
twobyte(2),
threebyte(3),
fourbyte(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the address length, including the
control portion."
DEFVAL { twobyte }
::= { wfFrSwDlcmiEntry 7 }
wfFrSwDlcmiControlByteDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates inclusion of control byte in q922 format."
DEFVAL { disabled }
::= { wfFrSwDlcmiEntry 8 }
wfFrSwDlcmiPollingInterval OBJECT-TYPE
SYNTAX INTEGER(5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between successive status enquiry
messages."
DEFVAL { 15 }
::= { wfFrSwDlcmiEntry 9 }
wfFrSwDlcmiFullEnquiryInterval OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number of status enquiries before a full
status enquiry. (For bidirectional procedures.)"
DEFVAL { 6 }
::= { wfFrSwDlcmiEntry 10 }
wfFrSwDlcmiErrorThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number errors monitored before declaring
the interface down."
DEFVAL { 3 }
::= { wfFrSwDlcmiEntry 11 }
wfFrSwDlcmiMonitoredEvents OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the events over which error threshold is kept."
DEFVAL { 4 }
::= { wfFrSwDlcmiEntry 12 }
wfFrSwDlcmiRecoveryCounts OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of correct polling
cycles during recovery."
::= { wfFrSwDlcmiEntry 13 }
wfFrSwDlcmiMaxSupportedVCs OBJECT-TYPE
SYNTAX INTEGER(1..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the maximum number of VCs allowed."
DEFVAL { 100 }
::= { wfFrSwDlcmiEntry 14 }
wfFrSwDlcmiVCsInUse OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of VCs that are currently
configured on this interface."
::= { wfFrSwDlcmiEntry 15 }
wfFrSwSwitchHdrErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped because they were
received on the remote side with an invalid switch header."
::= { wfFrSwDlcmiEntry 16 }
wfFrSwDlcmiSequenceCount OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates this switch's sequence counter; value of
next to send."
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 17 }
wfFrSwDlcmiLastReceived OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the sequence number just received from
the end station."
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 18 }
wfFrSwDlcmiActiveSeqCount OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the switch's sequence counter for sending
status enquiry. (For bidirectional procedures.)"
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 19 }
wfFrSwDlcmiActiveReceived OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the sequence number just received from the
enquiring station. (For bidirectional procedures.)"
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 20 }
wfFrSwDlcmiPolls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the counter of where we are in the polling cycle."
::= { wfFrSwDlcmiEntry 21 }
wfFrSwDlcmiAlarmTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Counter of 1/2 second timeouts. Indicates
when to expect poll."
::= { wfFrSwDlcmiEntry 22 }
wfFrSwErrType OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
other(2),
short(3),
long(4),
illegaldlci(5),
unknowndlci(6),
protoerr(7),
unknownie(8),
sequenceerr(9),
unknownrpt(10),
byteerr(11),
hdrerr(12),
formaterr(13)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the type of the last specific monitored error."
DEFVAL { reset }
::= { wfFrSwDlcmiEntry 23 }
wfFrSwErrData OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Contains as much of the error packet as possible."
::= { wfFrSwDlcmiEntry 24 }
wfFrSwErrTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the time the last error occurred."
::= { wfFrSwDlcmiEntry 25 }
wfFrSwBcMeasurementInterval OBJECT-TYPE
SYNTAX INTEGER(100..2000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the Committed Burst sample window interval in msec"
DEFVAL { 500 }
::= { wfFrSwDlcmiEntry 26 }
wfFrSwDlcmiMcastNoBufferErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of times a multicast failed partially
or wholly because there are insufficient buffers available
to create multiple copies of a multicast frame"
::= { wfFrSwDlcmiEntry 27 }
wfFrSwDlcmiFrameTooShortErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped that
are too short to be accepted."
::= { wfFrSwDlcmiEntry 28 }
wfFrSwDlcmiFrameTooLongErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped that
are too long to be accepted."
::= { wfFrSwDlcmiEntry 29 }
wfFrSwDlcmiIllegalDlciErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped that
had an invalid DLCI value."
::= { wfFrSwDlcmiEntry 30 }
wfFrSwDlcmiUnknownDlciErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped which
had an unknown DLCI value."
::= { wfFrSwDlcmiEntry 31 }
wfFrSwDlcmiProtocolErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped because
of a DLCMI protocol violation."
::= { wfFrSwDlcmiEntry 32 }
wfFrSwDlcmiUnknownIEErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped that
had an unknown information element."
::= { wfFrSwDlcmiEntry 33 }
wfFrSwDlcmiSequenceErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped because
of a DLCMI sequence error."
::= { wfFrSwDlcmiEntry 34 }
wfFrSwDlcmiUnknownRPTErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped which
had an unknown report type."
::= { wfFrSwDlcmiEntry 35 }
wfFrSwDlcmiControlByteErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped that
had an unsupported control byte."
::= { wfFrSwDlcmiEntry 36 }
wfFrSwDlcmiFormatErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped due to
a frame format error."
::= { wfFrSwDlcmiEntry 37 }
wfFrSwDlcmiOtherErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames dropped due to unknown
or other errors not counted by any error counter."
::= { wfFrSwDlcmiEntry 38 }
wfFrSwDlcmiStatus OBJECT-TYPE
SYNTAX INTEGER {
running(1),
recovered(2),
fault(3),
start(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates which state of execution the DLCMI gate is in"
DEFVAL { start }
::= { wfFrSwDlcmiEntry 39 }
wfFrSwDlcmiNewVCs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of newly added PVCs that we have not yet told the
CPE about, by means of a full-status message."
::= { wfFrSwDlcmiEntry 40 }
wfFrSwDlcmiDeletedVCs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of deletedly added PVCs that we have not yet told the
CPE about, by means of a full-status message."
::= { wfFrSwDlcmiEntry 41 }
wfFrSwDlcmiFullStatusSeq OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the expected sequence number for the next Status Enquiry
message that will prove that the CPE received our last Full Status
Message and knows about the deleted PVCs."
::= { wfFrSwDlcmiEntry 42 }
wfFrSwDlcmiBidirect OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this frame relay interface."
DEFVAL { disable }
::= { wfFrSwDlcmiEntry 43 }
wfFrSwDlcmiDteStatus OBJECT-TYPE
SYNTAX INTEGER {
running(1),
recovered(2),
fault(3),
start(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates which state of execution the DLCMI gate is in for
bidirectional procedures."
DEFVAL { start }
::= { wfFrSwDlcmiEntry 44 }
wfFrSwDlcmiDteSeqCount OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the switch's sequence counter for sending
status enquiry. (For bidirectional procedures.)"
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 45 }
wfFrSwDlcmiDteReceived OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the sequence number just received from the
enquiring station. (For bidirectional procedures.)"
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 46 }
wfFrSwDlcmiDteLastReceived OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the sequence number just received from
the end station."
DEFVAL { 1 }
::= { wfFrSwDlcmiEntry 47 }
wfFrSwDlcmiDtePolls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the counter of where we are in the polling cycle."
::= { wfFrSwDlcmiEntry 48 }
wfFrSwDlcmiDtePollingInterval OBJECT-TYPE
SYNTAX INTEGER(5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between successive status enquiry
messages."
DEFVAL { 10 }
::= { wfFrSwDlcmiEntry 49 }
wfFrSwDlcmiDteFullEnquiryInterval OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number of status enquiries before a full
status enquiry. (For bidirectional procedures.)"
DEFVAL { 6 }
::= { wfFrSwDlcmiEntry 50 }
wfFrSwDlcmiDteErrorThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number errors monitored before declaring
the interface down."
DEFVAL { 3 }
::= { wfFrSwDlcmiEntry 51 }
wfFrSwDlcmiCrossNetEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this frame relay interface."
DEFVAL { enable }
::= { wfFrSwDlcmiEntry 52 }
wfFrSwDlcmiCrossNetPollingInterval OBJECT-TYPE
SYNTAX INTEGER(5..86400)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds between successive status enquiry
messages."
DEFVAL { 120 }
::= { wfFrSwDlcmiEntry 53 }
wfFrSwDlcmiCrossNetErrorThreshold OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number missed heartbeat polls before
declaring the cross-net PVC inactive."
DEFVAL { 3 }
::= { wfFrSwDlcmiEntry 54 }
wfFrSwDlcmiCrossNetAsyncUpdateEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether we are to send to the other end
of the network, status updates for dlcis as soon as
there is a change of status for the dlci."
DEFVAL { enabled }
::= { wfFrSwDlcmiEntry 55 }
wfFrSwDlcmiBcMeasurementEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether Committed Burst Measurement is enabled
for this interface. If this attribute is set to DISABLE then
DE bit setting in Frame Relay frames at this interface is disabled."
DEFVAL { enable }
::= { wfFrSwDlcmiEntry 56 }
wfFrSwDlcmiAsyncUpdateEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the link management entity should
send an asynchronous single PVC update message
when the state of a PVC is changed by a technician
or by cross-net polling procedures. "
DEFVAL { enabled }
::= { wfFrSwDlcmiEntry 57 }
wfFrSwDlcmiCrossNetListenEnable
OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the link management entity should
make a judgement of the PVC's status based on Cross
Net updates."
DEFVAL { disabled }
::= { wfFrSwDlcmiEntry 58 }
wfFrSwDlcmiSvcDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicates whether SVC is enabled or disabled for this access
channel. "
DEFVAL { disabled }
::= { wfFrSwDlcmiEntry 59 }
wfFrSwDlcmiL2AddrType OBJECT-TYPE
SYNTAX INTEGER {
e164(1),
x121(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicates the address type supported on this access
channel. This information is needed when wFrSwDlcmiSVCDisable
is enabled. "
DEFVAL { e164 }
::= { wfFrSwDlcmiEntry 60 }
wfFrSwDlcmiEscapeMode OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
ingress(2),
egress(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Identifies the Escape mode (none, ingress or egress) to be used for
PVCs with wfFrSwVcEscapeMode set to enabled."
DEFVAL { disabled }
::= { wfFrSwDlcmiEntry 61 }
wfFrSwDlcmiEscapeCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the FR-DTE circuit number corresponding to an Escape PVC.
Applies only to PVCs with wfFrSwVcEscapeEnable set to enabled."
::= { wfFrSwDlcmiEntry 62 }
wfFrSwDlcmiEscapeVcCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The number of PVCs on this DLCMI that are configured as
Escape VCs"
DEFVAL { 0 }
::= { wfFrSwDlcmiEntry 63 }
wfFrSwDlcmiIwfMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
sdlc2frsw(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Identifies the interworking mode (none, SDLC-to-FRSW) to be used for
PVCs with wfFrSwVcEscapeMode set to enabled."
DEFVAL { none }
::= { wfFrSwDlcmiEntry 64 }
wfFrSwDlcmiSvcBillingEnable
OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the SVC Billing on this access
channel set to enable."
DEFVAL { enabled }
::= { wfFrSwDlcmiEntry 65 }
wfFrSwDlcmiSpvcAgent OBJECT-TYPE
SYNTAX INTEGER {
none(1),
cra(2),
caa(3),
craandcaa(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicates if an SPVC Call Request Agent, Call Accept
Agent, or both are enabled on this FRSW circuit."
DEFVAL { none }
::= { wfFrSwDlcmiEntry 66 }
wfFrSwDlcmiCallAccDlciSelectionType OBJECT-TYPE
SYNTAX INTEGER {
any(1),
specific(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates to the Call Accept Agent to accept SPVC Call Setup
requests for any available DLCI or for a specific DLCI. Call
Setup requests with the wrong selection type will be rejected."
DEFVAL { any }
::= { wfFrSwDlcmiEntry 67 }
wfFrSwCctTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwCctEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"Frame Relay Circuit table gives information
about a virtual circuit."
::= { wfFrswGroup 2 }
wfFrSwCctEntry OBJECT-TYPE
SYNTAX WfFrSwCctEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"An entry in the Frame Relay (Virtual) Circuit table."
INDEX { wfFrSwCctNumber,
wfFrSwCctDlci }
::= { wfFrSwCctTable 1 }
WfFrSwCctEntry ::= SEQUENCE {
wfFrSwCctDelete
INTEGER,
wfFrSwCctNumber
INTEGER,
wfFrSwCctDlci
INTEGER,
wfFrSwCctState
INTEGER,
wfFrSwCctMulticast
INTEGER,
wfFrSwCctInBc
INTEGER,
wfFrSwCctOutBc
INTEGER,
wfFrSwCctInBe
INTEGER,
wfFrSwCctOutBe
INTEGER,
wfFrSwCctInThroughput
INTEGER,
wfFrSwCctOutThroughput
INTEGER,
wfFrSwCctCreationTime
TimeTicks,
wfFrSwCctLastTimeChange
TimeTicks,
wfFrSwCctLocalSentNonDEFrames
Counter,
wfFrSwCctLocalSentNonDEOctets
Counter,
wfFrSwCctLocalSentDEFrames
Counter,
wfFrSwCctLocalSentDEOctets
Counter,
wfFrSwCctLocalSetFECNFrames
Counter,
wfFrSwCctLocalSetFECNOctets
Counter,
wfFrSwCctLocalSetBECNFrames
Counter,
wfFrSwCctLocalSetBECNOctets
Counter,
wfFrSwCctLocalSetDEFrames
Counter,
wfFrSwCctLocalSetDEOctets
Counter,
wfFrSwCctLocalDropNonDEFrames
Counter,
wfFrSwCctLocalDropNonDEOctets
Counter,
wfFrSwCctLocalDropDEFrames
Counter,
wfFrSwCctLocalDropDEOctets
Counter,
wfFrSwCctInactiveVCDropFrames
Counter,
wfFrSwCctInactiveVCDropOctets
Counter,
wfFrSwCctLocalRecvNonDEFrames
Counter,
wfFrSwCctLocalRecvNonDEOctets
Counter,
wfFrSwCctLocalRecvDEFrames
Counter,
wfFrSwCctLocalRecvDEOctets
Counter,
wfFrSwCctLocalRecvFECNFrames
Counter,
wfFrSwCctLocalRecvFECNOctets
Counter,
wfFrSwCctLocalRecvBECNFrames
Counter,
wfFrSwCctLocalRecvBECNOctets
Counter,
wfFrSwCctLocalRecentNonDEOctets
Counter,
wfFrSwCctRemoteSentNonDEFrames
Counter,
wfFrSwCctRemoteSentNonDEOctets
Counter,
wfFrSwCctRemoteSentDEFrames
Counter,
wfFrSwCctRemoteSentDEOctets
Counter,
wfFrSwCctRemoteSetFECNFrames
Counter,
wfFrSwCctRemoteSetFECNOctets
Counter,
wfFrSwCctRemoteSetBECNFrames
Counter,
wfFrSwCctRemoteSetBECNOctets
Counter,
wfFrSwCctRemoteDropNonDEFrames
Counter,
wfFrSwCctRemoteDropNonDEOctets
Counter,
wfFrSwCctRemoteDropDEFrames
Counter,
wfFrSwCctRemoteDropDEOctets
Counter,
wfFrSwCctRemoteRecvNonDEFrames
Counter,
wfFrSwCctRemoteRecvNonDEOctets
Counter,
wfFrSwCctRemoteRecvDEFrames
Counter,
wfFrSwCctRemoteRecvDEOctets
Counter,
wfFrSwCctRemoteRecvFECNFrames
Counter,
wfFrSwCctRemoteRecvFECNOctets
Counter,
wfFrSwCctRemoteRecvBECNFrames
Counter,
wfFrSwCctRemoteRecvBECNOctets
Counter,
wfFrSwCctLocalBecnState
INTEGER,
wfFrSwCctRemoteBecnState
INTEGER,
wfFrSwCctLocalOrRemoteConnection
INTEGER,
wfFrSwCctInBcOctets
INTEGER,
wfFrSwCctStateSet
INTEGER,
wfFrSwCctReportedStatus
INTEGER,
wfFrSwCctReceivedStatus
INTEGER,
wfFrSwCctCrossNetStatus
INTEGER,
wfFrSwCctXNetSent
INTEGER,
wfFrSwCctXNetReceived
INTEGER,
wfFrSwCctXNetErrors
Counter
}
wfFrSwCctDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2),
system(3)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indication to delete this frame relay interface."
DEFVAL { created }
::= { wfFrSwCctEntry 1 }
wfFrSwCctNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identifier; the circuit number of this interface."
::= { wfFrSwCctEntry 2 }
wfFrSwCctDlci OBJECT-TYPE
SYNTAX INTEGER {
twobyteminimum(16),
twobytemaximum(1007),
threebyteminimum(1024),
threebytemaximum(64511),
fourbyteminimum(131072),
fourbytemaximum(8257535)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identifier; this indicates the virtual
circuit identifier"
::= { wfFrSwCctEntry 3 }
wfFrSwCctState OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
active(2),
inactive(3),
control(4),
user(5)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether the particular virtual circuit is
operational."
DEFVAL { invalid }
::= { wfFrSwCctEntry 4 }
wfFrSwCctMulticast OBJECT-TYPE
SYNTAX INTEGER {
multicast(1),
unicast(2)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicates whether this dlci is used for multicast
or single destination."
DEFVAL { unicast }
::= { wfFrSwCctEntry 5 }
wfFrSwCctInBc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the Incoming Committed Burst bits
for this virtual circuit."
::= { wfFrSwCctEntry 6 }
wfFrSwCctOutBc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the Outgoing Committed Burst bits
for this virtual circuit."
::= { wfFrSwCctEntry 7 }
wfFrSwCctInBe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicates the Incoming Excess Burst bits
for this virtual circuit."
::= { wfFrSwCctEntry 8 }
wfFrSwCctOutBe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicates the Outgoing Excess Burst bits
for this virtual circuit."
::= { wfFrSwCctEntry 9 }
wfFrSwCctInThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicates the incoming throughput in bits/sec for this virtual circuit."
::= { wfFrSwCctEntry 10 }
wfFrSwCctOutThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indicates the outgoing throughput in bits/sec for this virtual circuit."
::= { wfFrSwCctEntry 11 }
wfFrSwCctCreationTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the value of sysUpTime when the VC
was created."
::= { wfFrSwCctEntry 12 }
wfFrSwCctLastTimeChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the value of sysUpTime when last there was a
change in VC state."
::= { wfFrSwCctEntry 13 }
wfFrSwCctLocalSentNonDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames without the DE bit sent on this
virtual circuit over the local interface."
::= { wfFrSwCctEntry 14 }
wfFrSwCctLocalSentNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets without DE bit sent on this
virtual circuit over the local interface."
::= { wfFrSwCctEntry 15 }
wfFrSwCctLocalSentDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames with DE bit set sent on this virtual
circuit over the local interface."
::= { wfFrSwCctEntry 16 }
wfFrSwCctLocalSentDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets with DE bit set sent on this
virtual circuit over the local interface."
::= { wfFrSwCctEntry 17 }
wfFrSwCctLocalSetFECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames sent to the local
interface on which this switch set the FECN bit ."
::= { wfFrSwCctEntry 18 }
wfFrSwCctLocalSetFECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames sent to the
local interface on which this switch set the FECN bit."
::= { wfFrSwCctEntry 19 }
wfFrSwCctLocalSetBECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames sent to the local
interface on which this switch set the BECN bit."
::= { wfFrSwCctEntry 20 }
wfFrSwCctLocalSetBECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames sent to the
local interface on which this switch set the BECN bit."
::= { wfFrSwCctEntry 21 }
wfFrSwCctLocalSetDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames sent to the local
interface on which this switch set the DE bit."
::= { wfFrSwCctEntry 22 }
wfFrSwCctLocalSetDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames sent to the
local interface on which this switch set the DE bit."
::= { wfFrSwCctEntry 23 }
wfFrSwCctLocalDropNonDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the local
interface which were discarded, excluding any frames
with the DE bit set."
::= { wfFrSwCctEntry 24 }
wfFrSwCctLocalDropNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received over
the local interface which were discarded, excluding any
frames with the DE bit set."
::= { wfFrSwCctEntry 25 }
wfFrSwCctLocalDropDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the local
interface, having the DE bit set, which were discarded."
::= { wfFrSwCctEntry 26 }
wfFrSwCctLocalDropDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received over
the local interface, having the DE bit set, which
were discarded."
::= { wfFrSwCctEntry 27 }
wfFrSwCctInactiveVCDropFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates how many frames were discarded because the
virtual circuit was inactive."
::= { wfFrSwCctEntry 28 }
wfFrSwCctInactiveVCDropOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates how many Octets were discarded because the
virtual circuit was inactive."
::= { wfFrSwCctEntry 29 }
wfFrSwCctLocalRecvNonDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received on this
virtual circuit over the local interface."
::= { wfFrSwCctEntry 30 }
wfFrSwCctLocalRecvNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets received on
this virtual circuit over the local interface."
::= { wfFrSwCctEntry 31 }
wfFrSwCctLocalRecvDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
local interface with the DE bit set."
::= { wfFrSwCctEntry 32 }
wfFrSwCctLocalRecvDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received
over the local interface with the DE bit set."
::= { wfFrSwCctEntry 33 }
wfFrSwCctLocalRecvFECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
local interface with the FECN bit set."
::= { wfFrSwCctEntry 34 }
wfFrSwCctLocalRecvFECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received
over the local interface with the FECN bit set."
::= { wfFrSwCctEntry 35 }
wfFrSwCctLocalRecvBECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
local interface with the BECN bit set."
::= { wfFrSwCctEntry 36 }
wfFrSwCctLocalRecvBECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received
over the local interface with the BECN bit set."
::= { wfFrSwCctEntry 37 }
wfFrSwCctLocalRecentNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets received over the local
interface during the most recent sampling period."
::= { wfFrSwCctEntry 38 }
wfFrSwCctRemoteSentNonDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of Non DE set frames sent over the remote interface."
::= { wfFrSwCctEntry 39 }
wfFrSwCctRemoteSentNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of Non DE set octets sent over the remote interface."
::= { wfFrSwCctEntry 40 }
wfFrSwCctRemoteSentDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of DE set frames sent over the remote interface."
::= { wfFrSwCctEntry 41 }
wfFrSwCctRemoteSentDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of DE set octets sent over the remote interface."
::= { wfFrSwCctEntry 42 }
wfFrSwCctRemoteSetFECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames sent to the remote
interface on which this switch set the FECN bit."
::= { wfFrSwCctEntry 43 }
wfFrSwCctRemoteSetFECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames sent to the remote
interface that on which this switch set the FECN bit."
::= { wfFrSwCctEntry 44 }
wfFrSwCctRemoteSetBECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames sent to the remote
interface on which this switch set the BECN bit."
::= { wfFrSwCctEntry 45 }
wfFrSwCctRemoteSetBECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames sent to the
remote interface on which this switch set the BECN bit."
::= { wfFrSwCctEntry 46 }
wfFrSwCctRemoteDropNonDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
remote interface which were discarded, excluding
any frames with the DE bit set."
::= { wfFrSwCctEntry 47 }
wfFrSwCctRemoteDropNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received
over the remote interface which were discarded,
excluding any frames with the DE bit set."
::= { wfFrSwCctEntry 48 }
wfFrSwCctRemoteDropDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over
the remote interface, having the DE bit set,
which were discarded."
::= { wfFrSwCctEntry 49 }
wfFrSwCctRemoteDropDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received over
the remote interface, having the DE bit set,
which were discarded."
::= { wfFrSwCctEntry 50 }
wfFrSwCctRemoteRecvNonDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received on this virtual
circuit over the remote interface."
::= { wfFrSwCctEntry 51 }
wfFrSwCctRemoteRecvNonDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets received on this
virtual circuit over the remote interface."
::= { wfFrSwCctEntry 52 }
wfFrSwCctRemoteRecvDEFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
remote interface with the DE bit set."
::= { wfFrSwCctEntry 53 }
wfFrSwCctRemoteRecvDEOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received over
the remote interface with the DE bit set."
::= { wfFrSwCctEntry 54 }
wfFrSwCctRemoteRecvFECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
remote interface with the FECN bit set."
::= { wfFrSwCctEntry 55 }
wfFrSwCctRemoteRecvFECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received over
the remote interface with the FECN bit set."
::= { wfFrSwCctEntry 56 }
wfFrSwCctRemoteRecvBECNFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of frames received over the
remote interface with the BECN bit set."
::= { wfFrSwCctEntry 57 }
wfFrSwCctRemoteRecvBECNOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the number of octets in frames received over
the remote interface with the BECN bit set."
::= { wfFrSwCctEntry 58 }
wfFrSwCctLocalBecnState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the local BECN state"
::= { wfFrSwCctEntry 59 }
wfFrSwCctRemoteBecnState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the remote BECN state"
::= { wfFrSwCctEntry 60 }
wfFrSwCctLocalOrRemoteConnection OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remote(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates whether this connection is Local to Local Connection
or Local to Remote connection."
DEFVAL { remote }
::= { wfFrSwCctEntry 61 }
wfFrSwCctInBcOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates the Incoming Committed Burst in octets
for this virtual circuit."
::= { wfFrSwCctEntry 62 }
wfFrSwCctStateSet OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"User access for setting the state of a virtual circuit"
DEFVAL { active }
::= { wfFrSwCctEntry 63 }
wfFrSwCctReportedStatus OBJECT-TYPE
SYNTAX INTEGER {
acked(1),
unacked(2),
unreported(3)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Record keeping for circuit status"
DEFVAL { unreported }
::= { wfFrSwCctEntry 64 }
wfFrSwCctReceivedStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"State of a virtual circuit as reported by the network at an NNI"
DEFVAL { active }
::= { wfFrSwCctEntry 65 }
wfFrSwCctCrossNetStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"State of a virtual circuit as reported by the other end of the network
under bidirectional signalling."
DEFVAL { active }
::= { wfFrSwCctEntry 66 }
wfFrSwCctXNetSent OBJECT-TYPE
SYNTAX INTEGER {
unsent(1),
sent(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Whether we have sent a cross net status message for this VC yet."
DEFVAL { unsent }
::= { wfFrSwCctEntry 67 }
wfFrSwCctXNetReceived OBJECT-TYPE
SYNTAX INTEGER {
recv(1),
unrecv(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Whether we have received a cross net status message for this VC during
the current polling interval. "
DEFVAL { unrecv }
::= { wfFrSwCctEntry 68 }
wfFrSwCctXNetErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS obsolete
DESCRIPTION
"This is the count of the consecutive errors (usually timeouts) against
this VC in cross-network heartbeat polling "
::= { wfFrSwCctEntry 69 }
wfFrSwTupleTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwTupleEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The Parameters for the Tuple table, identifying
the endpoints of virtual circuits as pairs of IP
addresses and DLCI."
::= { wfFrswGroup 3 }
wfFrSwTupleEntry OBJECT-TYPE
SYNTAX WfFrSwTupleEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The parameters for a particular Tuple."
INDEX { wfFrSwTupleIpAddrA,
wfFrSwTupleDlciA,
wfFrSwTupleIpAddrB,
wfFrSwTupleDlciB }
::= { wfFrSwTupleTable 1 }
WfFrSwTupleEntry ::= SEQUENCE {
wfFrSwTupleDelete
INTEGER,
wfFrSwTupleIpAddrA
IpAddress,
wfFrSwTupleDlciA
INTEGER,
wfFrSwTupleIpAddrB
IpAddress,
wfFrSwTupleDlciB
INTEGER
}
wfFrSwTupleDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS obsolete
DESCRIPTION
"Indication to delete this tuple."
DEFVAL { created }
::= { wfFrSwTupleEntry 1 }
wfFrSwTupleIpAddrA OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance indentifier; indicates the IP address
associated with endpoint 'A' of a virtual circuit."
::= { wfFrSwTupleEntry 2 }
wfFrSwTupleDlciA OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identfier; indicates the DLCI associated
with endpoint 'A' of a virtual circuit."
::= { wfFrSwTupleEntry 3 }
wfFrSwTupleIpAddrB OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identfier; indicates the IP address
associated with endpoint 'B' of a virtual circuit."
::= { wfFrSwTupleEntry 4 }
wfFrSwTupleDlciB OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identifier; Indicates the DLCI associated
with endpoint 'B' of a virtual circuit."
::= { wfFrSwTupleEntry 5 }
wfFrSwMcastTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwMcastEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The list of multicast addresses"
::= { wfFrswGroup 4 }
wfFrSwMcastEntry OBJECT-TYPE
SYNTAX WfFrSwMcastEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The parameters for a particular Multicast address."
INDEX { wfFrSwMcastIndex }
::= { wfFrSwMcastTable 1 }
WfFrSwMcastEntry ::= SEQUENCE {
wfFrSwMcastDelete
INTEGER,
wfFrSwMcastIndex
INTEGER,
wfFrSwMcastIpAddr
IpAddress,
wfFrSwMcastDlci
INTEGER,
wfFrSwMcastIndividualDlci
INTEGER
}
wfFrSwMcastDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this multicast instance."
DEFVAL { created }
::= { wfFrSwMcastEntry 1 }
wfFrSwMcastIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index of this multicast DLCI instance"
::= { wfFrSwMcastEntry 2 }
wfFrSwMcastIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"IP address of the interface in which this multicast DLCI is defined."
::= { wfFrSwMcastEntry 3 }
wfFrSwMcastDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Identifies the multicast DLCI with which the IndividualDlci is associated."
::= { wfFrSwMcastEntry 4 }
wfFrSwMcastIndividualDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the DLCI associated with the above multicast DLCI."
::= { wfFrSwMcastEntry 5 }
wfFrSwUsage OBJECT IDENTIFIER ::= { wfFrswGroup 5 }
wfFrSwUsageEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable FRSW billing."
DEFVAL { enabled }
::= { wfFrSwUsage 1 }
wfFrSwUsageVolume OBJECT-TYPE
SYNTAX INTEGER(0..14)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the file system volume number to which the
billing usage data files will be written. The volume
number corresponds to the slot number on which the
volume resides.
Note: Value 0 has the special meaning that no
'Store' and 'Flush' operations will take
place. This translates to no Billing data
will be written to the local file system.
'Update' operations will still be performed on
each local slot. Full Billing statistics
will still be available in the wfFrSwUsageTable
MIB."
::= { wfFrSwUsage 2 }
wfFrSwUsageVolumeBackup OBJECT-TYPE
SYNTAX INTEGER(0..14)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the backup volume if wfFrSwUsageVolume
becomes inoperative.
Note: This feature is not implemented in this release."
::= { wfFrSwUsage 3 }
wfFrSwUsageDirectory OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the directory where the billing usage data
files are stored. "
::= { wfFrSwUsage 4 }
wfFrSwUsageFilePrefix OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The base name of billing usage data files."
::= { wfFrSwUsage 5 }
wfFrSwUsageTimerInterval OBJECT-TYPE
SYNTAX INTEGER(1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number determines the timer interval (number
of seconds) unit for the Billing process to perform
its various timer driven tasks. i.e. updating billing
usage data, writing billing usage data to file system
and file system management activities."
DEFVAL { 20 }
::= { wfFrSwUsage 6 }
wfFrSwUsageUpdateInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number specifies the interval (number of minutes)
for the Billing process to collect and update billing
usage data in the wfFrSwUsage MIB. Note: When converted to seconds, this must be a multiple
of wfFrSwUsageTimerInterval."
DEFVAL { 10 }
::= { wfFrSwUsage 7 }
wfFrSwUsageStoreInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number specifies the interval (number of minutes)
for the Billing process to write billing usage data on
to the file system from the wfFrSwUsage MIB.
Note: When converted to seconds, this must be a multiple
of wfFrSwUsageTimerInterval."
DEFVAL { 10 }
::= { wfFrSwUsage 8 }
wfFrSwUsageFlushInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number specifies the interval (number of minutes)
for the Billing process to write billing usage data on
to the file system from the wfFrSwUsage MIB follow
by zeroing the wfFrSwUsage MIB.
Note: When converted to seconds, this must be a multiple of
wfFrSwUsageTimerInterval."
DEFVAL { 60 }
::= { wfFrSwUsage 9 }
wfFrSwUsageCleanupInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval (number of minutes) for the Billing
process to check and delete old billing usage data files.
Note: When converted to seconds, this must be a multilple
of wfFrSwUsageTimerInterval."
DEFVAL { 60 }
::= { wfFrSwUsage 10 }
wfFrSwUsageLocalTimeZone OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates local time zone of the switch"
::= { wfFrSwUsage 11 }
wfFrSwUsageUpdateTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwUsageUpdateInterval timer
expiration or the starting time of the current
wfFrSwUsageUpdateInterval. This value is number
of seconds since midnight Jan 1, 1976 (GMT)."
::= { wfFrSwUsage 12 }
wfFrSwUsageStoreTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwUsageStoreInterval
timer expiration or the starting time of the current
wfFrSwUsageStoreInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT). "
::= { wfFrSwUsage 13 }
wfFrSwUsageFlushTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwUsageFlushInterval
timer expiration or the starting time of the current
wfFrSwUsageFlushInterval. This value is
number of seconds since midnight Jan. 1, 1976 (GMT)."
::= { wfFrSwUsage 14 }
wfFrSwUsageCleanupTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwUsageCleanupInterval
timer expiration or the starting time of the current
wfFrSwUsageCleanupInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT)."
::= { wfFrSwUsage 15 }
wfFrSwUsageUpdateData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate updating of the billing usage data.
Once activated, this attribute should be reset to zero
to allow subsequent activations. "
::= { wfFrSwUsage 16 }
wfFrSwUsageStoreData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate updating and writing of the billing
usage data. Once activated, this attribute should
be reset to zero to allow subsequent activations. "
::= { wfFrSwUsage 17 }
wfFrSwUsageFlushData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate updating and writing of the billing usage
data and followed by zeroing the wfFrSwBillingUsage
MIB. Once activated, this attribute should be reset
to zero to allow subsequent activations. "
::= { wfFrSwUsage 18 }
wfFrSwUsageFileCleanup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate checking and deleting old billing usage
data files. Once activated, this attribute should
be reset to zero to allow subsequent activations. "
::= { wfFrSwUsage 19 }
wfFrSwUsageState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current state FRSW billing."
DEFVAL { notpresent }
::= { wfFrSwUsage 20 }
wfFrSwUsageCurVolume OBJECT-TYPE
SYNTAX INTEGER(0..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current file system volume number used. This
number is the same as wfFrSwUsageVolume except
when the user sets wfFrSwUsageVolume to an
invalid number."
::= { wfFrSwUsage 21 }
wfFrSwUsageCurVolumeBackup OBJECT-TYPE
SYNTAX INTEGER(0..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"curent backup file system volume number used. This
number is the same as wfFrSwUsageVolumeBackUp except
when the user sets wfFrSwUsageVolume to an
invalid number.
Note: This feature is not implemented in this release."
::= { wfFrSwUsage 22 }
wfFrSwUsageCurDirectory OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current directory name used. This number is the
same as wfFrSwUsageDirectory except when the user
sets wfFrSwUsageDirectory to an invalid name."
::= { wfFrSwUsage 23 }
wfFrSwUsageCurFilePrefix OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current base file name used. This number is the
same as wfFrSwUsageFilePrefix except when the user
sets wfFrSwUsageFilePrefix to an invalid name."
::= { wfFrSwUsage 24 }
wfFrSwUsageCurTimerInterval OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current timer interval number used. This number is
the same as wfFrSwUsageTimerInterval except when the
user sets wfFrSwUsageTimerInterval to an invalid value."
DEFVAL { 20 }
::= { wfFrSwUsage 25 }
wfFrSwUsageCurUpdateInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current update interval number used. This number is
the same as wfFrSwUsageUpdateInterval except when the
user sets wfFrSwUsageUpdateInterval to an invalid value."
DEFVAL { 10 }
::= { wfFrSwUsage 26 }
wfFrSwUsageCurStoreInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current store timer interval number used. This
number is the same as wfFrSwUsageStoreInterval
except when the user sets wfFrSwUsageStoreInterval
to an invalid value."
DEFVAL { 10 }
::= { wfFrSwUsage 27 }
wfFrSwUsageCurFlushInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current flush timer interval number used. This
number is the same as wfFrSwUsageFlushInterval
except when the user sets wfFrSwUsageFlushInterval
to an invalid value."
DEFVAL { 60 }
::= { wfFrSwUsage 28 }
wfFrSwUsageCurCleanupInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current file cleanup timer interval number used. This
number is the same as wfFrSwUsageCleanupInterval
except when the user sets wfFrSwUsageCleanupInterval
to an invalid value."
DEFVAL { 60 }
::= { wfFrSwUsage 29 }
wfFrSwUsageDebug OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable printing of debug edl (trap)
messages.
NOTE: Do not enable this attribute in operational enviornment
as it will likely flood the logging facility. This
attribute is reserved for specialized debugging in a
controlled lab enviornment."
DEFVAL { disabled }
::= { wfFrSwUsage 30 }
wfFrSwUsageCurDebug OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current debug value used. This value is the
same as wfFrSwUsageDebug except when the user
sets wfFrSwUsageDeubg to an invalid value."
DEFVAL { disabled }
::= { wfFrSwUsage 31 }
wfFrSwUsageSwitchId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"switch id used in the billing usage data file."
::= { wfFrSwUsage 32 }
wfFrSwUsageNumEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"number of entries in wfFrSwUsageTable"
::= { wfFrSwUsage 33 }
wfFrSwSvcUsageEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable FRSW SVC billing."
DEFVAL { enabled }
::= { wfFrSwUsage 34 }
wfFrSwSvcUsageInterimRecordEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable Writing FRSW SVC billing record
while SVC connection is still up."
DEFVAL { enabled }
::= { wfFrSwUsage 35 }
wfFrSwSvcUsageVolume OBJECT-TYPE
SYNTAX INTEGER(0..14)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the file system volume number to which the
SVC billing usage data files will be written. The volume
number corresponds to the slot number on which the
volume resides.
Note: Value 0 has the special meaning that no
'Store' and 'Flush' operations will take
place. This translates to no Billing data
will be written to the local file system.
'Update' operations will still be performed on
each local slot. Full Billing statistics
will still be available in the wfFrSwUsageTable
MIB."
::= { wfFrSwUsage 36 }
wfFrSwSvcUsageDirectory OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The name of the directory where the SVC billing usage data
files are stored. "
::= { wfFrSwUsage 37 }
wfFrSwSvcUsageFilePrefix OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The base name of SVC billing usage data files."
::= { wfFrSwUsage 38 }
wfFrSwSvcUsageUpdateInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number specifies the interval (number of minutes)
for the SVC Billing process to collect and update billing
usage data in the wfFrSwUsage MIB. Note: When converted
to seconds, this must be a multiple of
wfFrSwUsageTimerInterval."
DEFVAL { 10 }
::= { wfFrSwUsage 39 }
wfFrSwSvcUsageStoreInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number specifies the interval (number of minutes)
for the SVC Billing process to write billing usage data on
to the file system from the wfFrSwUsage MIB.
Note: When converted to seconds, this must be a multiple
of wfFrSwUsageTimerInterval."
DEFVAL { 10 }
::= { wfFrSwUsage 40 }
wfFrSwSvcUsageFlushInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This number specifies the interval (number of minutes)
for the SVC Billing process to write billing usage data on
to the file system from the wfFrSwUsage MIB follow
by zeroing the wfFrSwUsage MIB.
Note: When converted to seconds, this must be a multiple of
wfFrSwUsageTimerInterval."
DEFVAL { 60 }
::= { wfFrSwUsage 41 }
wfFrSwSvcUsageCleanupInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the interval (number of minutes) for the SVC Billing
process to check and delete old billing usage data files.
Note: When converted to seconds, this must be a multilple
of wfFrSwUsageTimerInterval."
DEFVAL { 60 }
::= { wfFrSwUsage 42 }
wfFrSwSvcUsageUpdateTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwSvcUsageUpdateInterval timer
expiration or the starting time of the current
wfFrSwSvcUsageUpdateInterval. This value is number
of seconds since midnight Jan 1, 1976 (GMT)."
::= { wfFrSwUsage 43 }
wfFrSwSvcUsageStoreTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwSvcUsageStoreInterval
timer expiration or the starting time of the current
wfFrSwSvcUsageStoreInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT). "
::= { wfFrSwUsage 44 }
wfFrSwSvcUsageFlushTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwSvcUsageFlushInterval
timer expiration or the starting time of the current
wfFrSwSvcUsageFlushInterval. This value is
number of seconds since midnight Jan. 1, 1976 (GMT)."
::= { wfFrSwUsage 45 }
wfFrSwSvcUsageCleanupTimeStamp OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Time stamp of last wfFrSwSvcUsageCleanupInterval
timer expiration or the starting time of the current
wfFrSwSvcUsageCleanupInterval. This value is number
of seconds since midnight Jan. 1, 1976 (GMT)."
::= { wfFrSwUsage 46 }
wfFrSwSvcUsageUpdateData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate updating of the SVC billing usage data.
Once activated, this attribute should be reset to zero
to allow subsequent activations. "
::= { wfFrSwUsage 47 }
wfFrSwSvcUsageStoreData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate updating and writing of the SVC billing
usage data. Once activated, this attribute should
be reset to zero to allow subsequent activations. "
::= { wfFrSwUsage 48 }
wfFrSwSvcUsageFlushData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate updating and writing of the SVC billing usage
data and followed by zeroing the wfFrSwBillingUsage
MIB. Once activated, this attribute should be reset
to zero to allow subsequent activations. "
::= { wfFrSwUsage 49 }
wfFrSwSvcUsageFileCleanup OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Setting this attribute to a non-zero value will cause
an immediate checking and deleting old SVC billing usage
data files. Once activated, this attribute should
be reset to zero to allow subsequent activations. "
::= { wfFrSwUsage 50 }
wfFrSwSvcUsageState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current state FRSW SVC billing."
DEFVAL { notpresent }
::= { wfFrSwUsage 51 }
wfFrSwSvcUsageCurVolume OBJECT-TYPE
SYNTAX INTEGER(0..14)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current file system volume number used for SVC Billing.
This number is the same as wfFrSwSvcUsageVolume except
when the user sets wfFrSwSvcUsageVolume to an
invalid number."
::= { wfFrSwUsage 52 }
wfFrSwSvcUsageCurDirectory OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current directory name used for SVC Billing. This number
is the same as wfFrSwSvcUsageDirectory except when the user
sets wfFrSwSvcUsageDirectory to an invalid name."
::= { wfFrSwUsage 53 }
wfFrSwSvcUsageCurFilePrefix OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current base file name used for SVC Billing. This name
is the same as wfFrSwSvcUsageFilePrefix except when the user
sets wfFrSwSvcUsageFilePrefix to an invalid name."
::= { wfFrSwUsage 54 }
wfFrSwSvcUsageCurUpdateInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current update interval number used. This number is
the same as wfFrSwSvcUsageUpdateInterval except when the
user sets wfFrSwSvcUsageUpdateInterval to an invalid value."
DEFVAL { 10 }
::= { wfFrSwUsage 55 }
wfFrSwSvcUsageCurStoreInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current store timer interval number used. This
number is the same as wfFrSwSvcUsageStoreInterval
except when the user sets wfFrSwSvcUsageStoreInterval
to an invalid value."
DEFVAL { 10 }
::= { wfFrSwUsage 56 }
wfFrSwSvcUsageCurFlushInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current flush timer interval number used. This
number is the same as wfFrSwSvcUsageFlushInterval
except when the user sets wfFrSwSvcUsageFlushInterval
to an invalid value."
DEFVAL { 60 }
::= { wfFrSwUsage 57 }
wfFrSwSvcUsageCurCleanupInterval OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"current file cleanup timer interval number used. This
number is the same as wfFrSwSvcUsageCleanupInterval
except when the user sets wfFrSwSvcUsageCleanupInterval
to an invalid value."
DEFVAL { 60 }
::= { wfFrSwUsage 58 }
wfFrSwSvcUsageNumEntries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"number of entries in wfFrSwSvcUsageTable"
::= { wfFrSwUsage 59 }
wfFrSwSvcUsageVersionId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Software Version ID field is a two byte, right justified,
binary formated value that identifies the particular version
number of the software release. High nibble of byte 1 represents
the major version number. Low nibble of byte 1 represents the
release number. Byte 2 represents the integration number."
::= { wfFrSwUsage 60 }
wfFrSwUsageSwitchName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Switch name is a 6-bytes, right justified with leading
blanks as necessary. It can be combination of letters, numbers
and blanks. This ID identifies the particular networks
equipment for SVC billing usage data process."
::= { wfFrSwUsage 61 }
wfFrSwPvcUsageFileLayout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PVC usage file layout version"
::= { wfFrSwUsage 62 }
wfFrSwSvcUsageFileLayout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SVC usage file layout version"
::= { wfFrSwUsage 63 }
wfFrSwUsageTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwUsageEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The Billing usage table."
::= { wfFrswGroup 6 }
wfFrSwUsageEntry OBJECT-TYPE
SYNTAX WfFrSwUsageEntry
ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The parameters for Billing Usage."
INDEX { wfFrSwUsageCircuitNumber,
wfFrSwUsageDlci }
::= { wfFrSwUsageTable 1 }
WfFrSwUsageEntry ::= SEQUENCE {
wfFrSwUsageDelete
INTEGER,
wfFrSwUsageCircuitNumber
INTEGER,
wfFrSwUsageDlci
INTEGER,
wfFrSwUsageIPAddress
IpAddress,
wfFrSwUsageStartTimeStampHigh
INTEGER,
wfFrSwUsageStartTimeStampLow
INTEGER,
wfFrSwUsageEndTimeStampHigh
INTEGER,
wfFrSwUsageEndTimeStampLow
INTEGER,
wfFrSwUsageSentNonDEFramesHigh
INTEGER,
wfFrSwUsageSentNonDEFramesLow
INTEGER,
wfFrSwUsageSentNonDEOctetsHigh
INTEGER,
wfFrSwUsageSentNonDEOctetsLow
INTEGER,
wfFrSwUsageSentDEFramesHigh
INTEGER,
wfFrSwUsageSentDEFramesLow
INTEGER,
wfFrSwUsageSentDEOctetsHigh
INTEGER,
wfFrSwUsageSentDEOctetsLow
INTEGER,
wfFrSwUsageLastNonDEFramesHigh
INTEGER,
wfFrSwUsageLastNonDEFramesLow
INTEGER,
wfFrSwUsageLastNonDEOctetsHigh
INTEGER,
wfFrSwUsageLastNonDEOctetsLow
INTEGER,
wfFrSwUsageLastDEFramesHigh
INTEGER,
wfFrSwUsageLastDEFramesLow
INTEGER,
wfFrSwUsageLastDEOctetsHigh
INTEGER,
wfFrSwUsageLastDEOctetsLow
INTEGER,
wfFrSwUsageRemoteIPAddress
IpAddress,
wfFrSwUsageRemoteDlci
INTEGER
}
wfFrSwUsageDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Indicates status of this entry. FRSW_USAGE_CREATED
is the normal case. FRSW_USAGE_DELETED means the
corresponding tuple and vc instances were deleted
some time during this collection interval. This
billing instance will be deleted at the end of
the next wfFrSwUsageFlush period after this
billing record is written out to the file system."
DEFVAL { created }
::= { wfFrSwUsageEntry 1 }
wfFrSwUsageCircuitNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identifier; the circuit number of this
interface. "
::= { wfFrSwUsageEntry 2 }
wfFrSwUsageDlci OBJECT-TYPE
SYNTAX INTEGER {
twobyteminimum(16),
twobytemaximum(1007),
threebyteminimum(1024),
threebytemaximum(64511),
fourbyteminimum(131072),
fourbytemaximum(8257535)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Instance identifier; this indicates which virtual
circuit. "
::= { wfFrSwUsageEntry 3 }
wfFrSwUsageIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION
"(Local) IP address corresponding to
wfFrSwUsageCircuitNumber of this virtual circuit. "
::= { wfFrSwUsageEntry 4 }
wfFrSwUsageStartTimeStampHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time stamp of the starting time (the high 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since midnight Jan 1, 1976 (GMT)."
::= { wfFrSwUsageEntry 5 }
wfFrSwUsageStartTimeStampLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time stamp of the starting time (the low 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since midnight Jan 1, 1976 (GMT)."
::= { wfFrSwUsageEntry 6 }
wfFrSwUsageEndTimeStampHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time stamp of the ending time (the high 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since midnight Jan 1, 1976 (GMT)."
::= { wfFrSwUsageEntry 7 }
wfFrSwUsageEndTimeStampLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Time stamp of the ending time (the low 32 bits)
of last billing usage interval. This value is the
number of 1/100th seconds since midnight Jan 1, 1976 (GMT)."
::= { wfFrSwUsageEntry 8 }
wfFrSwUsageSentNonDEFramesHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the high 32 bits) of local frames sent
from this virtual circuit between
wfFrSwUsageStartTimeStamp and
wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 9 }
wfFrSwUsageSentNonDEFramesLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the low 32 bits) of local frames sent
from this virtual circuit between
wfFrSwUsageStartTimeStamp
and wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 10 }
wfFrSwUsageSentNonDEOctetsHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the high 32 bits) of local octets sent from
this virtual circuit between
wfFrSwUsageStartTimeStamp and
wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 11 }
wfFrSwUsageSentNonDEOctetsLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the low 32 bits) of local octets sent from
this virtual circuit between
wfFrSwUsageStartTimeStamp and
wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 12 }
wfFrSwUsageSentDEFramesHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the high 32 bits) of local frames with DE
bit sent from this virtual circuit between
wfFrSwUsageStartTimeStamp and
wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 13 }
wfFrSwUsageSentDEFramesLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the low 32 bits) of local frames with DE
bit sent from this virtual circuit between
wfFrSwUsageStartTimeStamp
and wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 14 }
wfFrSwUsageSentDEOctetsHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the high 32 bits) of local octets with
DE bit sent from this virtual circuit between
wfFrSwUsageStartTimeStamp and
wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 15 }
wfFrSwUsageSentDEOctetsLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"Number (the low 32 bits) of local octets with
DE bit sent from this virtual circuit between
wfFrSwUsageStartTimeStamp and
wfFrSwUsageEndTimeStamp."
::= { wfFrSwUsageEntry 16 }
wfFrSwUsageLastNonDEFramesHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (high 32 bits) value of
wfFrSwCctLocalSentNonDEFrames value at
wfFrSwUsageEndTimeStamp.
Note: Since wfFrSwCctLocalSentNonDEFrames
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfFrSwCctLocalSentNonDEFrames has wrapped
around."
::= { wfFrSwUsageEntry 17 }
wfFrSwUsageLastNonDEFramesLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (low 32 bits) value of
wfFrSwCctLocalSentNonDEFrames value at
wfFrSwUsageEndTimeStamp. "
::= { wfFrSwUsageEntry 18 }
wfFrSwUsageLastNonDEOctetsHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (high 32 bits) value of
wfFrSwCctLocalSentNonDEOctets value at
wfFrSwUsageEndTimeStamp.
Note: Since wfFrSwCctLocalSentNonDEOctets
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfFrSwCctLocalSentNonDEOctets has wrapped around."
::= { wfFrSwUsageEntry 19 }
wfFrSwUsageLastNonDEOctetsLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (low 32 bits) value of
wfFrSwCctLocalSentNonDEOctets value at
wfFrSwUsageEndTimeStamp. "
::= { wfFrSwUsageEntry 20 }
wfFrSwUsageLastDEFramesHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (high 32 bits) value of
wfFrSwCctLocalSentDEFrames value at
wfFrSwUsageEndTimeStamp.
Note: Since wfFrSwCctLocalSentNonDEFrames
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfFrSwCctLocalSentDEFrames has wrapped
around."
::= { wfFrSwUsageEntry 21 }
wfFrSwUsageLastDEFramesLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (low 32 bits) value of
wfFrSwCctLocalSentDEFrames value at
wfFrSwUsageEndTimeStamp. "
::= { wfFrSwUsageEntry 22 }
wfFrSwUsageLastDEOctetsHigh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (high 32 bits) value of
wfFrSwCctLocalSentDEOctets value
at wfFrSwUsageEndTimeStamp.
Note: Since wfFrSwCctLocalSentDEOctets
is a 32-bit COUNTER, this is really a counter
keeping track of number of times
wfFrSwCctLocalSentDEOctets has wrapped around."
::= { wfFrSwUsageEntry 23 }
wfFrSwUsageLastDEOctetsLow OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS obsolete
DESCRIPTION
"The (low 32 bits) value of
wfFrSwCctLocalSentDEOctets value
at wfFrSwUsageEndTimeStamp. "
::= { wfFrSwUsageEntry 24 }
wfFrSwUsageRemoteIPAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS obsolete
DESCRIPTION
"IP address of the other side (remote) of this PVC endpoint."
::= { wfFrSwUsageEntry 25 }
wfFrSwUsageRemoteDlci OBJECT-TYPE
SYNTAX INTEGER {
twobyteminimum(16),
twobytemaximum(1007),
threebyteminimum(1024),
threebytemaximum(64511),
fourbyteminimum(131072),
fourbytemaximum(8257535)
}
ACCESS read-only
STATUS obsolete
DESCRIPTION
"DLCI number of the other side (remote) of this PVC endpoint."
::= { wfFrSwUsageEntry 26 }
wfFrSwVcTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwVcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Frame Relay Virtual Circuit table gives information
about a virtual circuit."
::= { wfFrswGroup 7 }
wfFrSwVcEntry OBJECT-TYPE
SYNTAX WfFrSwVcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the Frame Relay (Virtual) Circuit table."
INDEX { wfFrSwVcCircuit,
wfFrSwVcDlci }
::= { wfFrSwVcTable 1 }
WfFrSwVcEntry ::= SEQUENCE {
wfFrSwVcDelete
INTEGER,
wfFrSwVcCircuit
INTEGER,
wfFrSwVcDlci
INTEGER,
wfFrSwVcState
INTEGER,
wfFrSwVcStateSet
INTEGER,
wfFrSwVcMulticast
INTEGER,
wfFrSwVcInBe
INTEGER,
wfFrSwVcOutBe
INTEGER,
wfFrSwVcInThroughput
INTEGER,
wfFrSwVcOutThroughput
INTEGER,
wfFrSwVcOutBc
INTEGER,
wfFrSwVcInBc
INTEGER,
wfFrSwVcInBcOctets
INTEGER,
wfFrSwVcBecnState
INTEGER,
wfFrSwVcReportedStatus
INTEGER,
wfFrSwVcReceivedStatus
INTEGER,
wfFrSwVcCrossNetStatus
INTEGER,
wfFrSwVcXNetSent
INTEGER,
wfFrSwVcXNetReceived
INTEGER,
wfFrSwVcCalledIpAddr
IpAddress,
wfFrSwVcCalledDlci
INTEGER,
wfFrSwVcTrfPriority
INTEGER,
wfFrSwVcCreationTime
TimeTicks,
wfFrSwVcLastTimeChange
TimeTicks,
wfFrSwVcTxNonDeFrames
Counter,
wfFrSwVcTxNonDeOctets
Counter,
wfFrSwVcTxDeFrames
Counter,
wfFrSwVcTxDeOctets
Counter,
wfFrSwVcSetFecnFrames
Counter,
wfFrSwVcSetFecnOctets
Counter,
wfFrSwVcSetBecnFrames
Counter,
wfFrSwVcSetBecnOctets
Counter,
wfFrSwVcSetDeFrames
Counter,
wfFrSwVcSetDeOctets
Counter,
wfFrSwVcDropNonDeFrames
Counter,
wfFrSwVcDropNonDeOctets
Counter,
wfFrSwVcDropDeFrames
Counter,
wfFrSwVcDropDeOctets
Counter,
wfFrSwVcInactiveVcDropFrames
Counter,
wfFrSwVcInactiveVcDropOctets
Counter,
wfFrSwVcRecvNonDeFrames
Counter,
wfFrSwVcRecvNonDeOctets
Counter,
wfFrSwVcRecvDeFrames
Counter,
wfFrSwVcRecvDeOctets
Counter,
wfFrSwVcRecvFecnFrames
Counter,
wfFrSwVcRecvFecnOctets
Counter,
wfFrSwVcRecvBecnFrames
Counter,
wfFrSwVcRecvBecnOctets
Counter,
wfFrSwVcRecentNonDeOctets
Counter,
wfFrSwVcXNetErrors
Counter,
wfFrSwVcDropExcessBurstFrames
Counter,
wfFrSwVcDropExcessBurstOctets
Counter,
wfFrSwVcInBeOctets
INTEGER,
wfFrSwVcCfgInBe
INTEGER,
wfFrSwVcRedirectAction
INTEGER,
wfFrSwVcRedirectType
INTEGER,
wfFrSwVcRedirectState
INTEGER,
wfFrSwVcBackupCalledIpAddr
IpAddress,
wfFrSwVcBackupCalledDlci
INTEGER,
wfFrSwVcBackupCrossNetStatus
INTEGER,
wfFrSwVcBackupCrossNetErrors
INTEGER,
wfFrSwVcAtmIwfMode
INTEGER,
wfFrSwVcAtmIwfVPI
INTEGER,
wfFrSwVcAtmIwfVCI
INTEGER,
wfFrSwVcAtmIwfLossPriorityPolicy
INTEGER,
wfFrSwVcAtmIwfDePolicy
INTEGER,
wfFrSwVcAtmIwfEfciPolicy
INTEGER,
wfFrSwVcEscapeEnable
INTEGER,
wfFrSwVcSpvcCallState
INTEGER,
wfFrSwVcCallReqCalledAddr
DisplayString,
wfFrSwVcCallReqDlciSelectionType
INTEGER,
wfFrSwVcCallReqCalledDlci
INTEGER,
wfFrSwVcCallReqRetryTimer
INTEGER,
wfFrSwVcCallReqMaxRetries
INTEGER
}
wfFrSwVcDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2),
system(3),
svc(4),
spvccra(5),
spvccaa(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this virtual circuit."
DEFVAL { created }
::= { wfFrSwVcEntry 1 }
wfFrSwVcCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier; the circuit number of this interface
(logical port)."
::= { wfFrSwVcEntry 2 }
wfFrSwVcDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier; this indicates the virtual
circuit identifier"
::= { wfFrSwVcEntry 3 }
wfFrSwVcState OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
active(2),
inactive(3),
control(4),
user(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the particular virtual circuit is
operational."
DEFVAL { invalid }
::= { wfFrSwVcEntry 4 }
wfFrSwVcStateSet OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"User access for setting the state of a virtual circuit"
DEFVAL { active }
::= { wfFrSwVcEntry 5 }
wfFrSwVcMulticast OBJECT-TYPE
SYNTAX INTEGER {
multicast(1),
unicast(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether this dlci is used for multicast
or a single destination."
DEFVAL { unicast }
::= { wfFrSwVcEntry 6 }
wfFrSwVcInBe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number Incoming Excess Burst bits
that are allowed in a configured time interval (T)."
DEFVAL { 2147483647 }
::= { wfFrSwVcEntry 7 }
wfFrSwVcOutBe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Outgoing Excess Burst bits
for this virtual circuit."
::= { wfFrSwVcEntry 8 }
wfFrSwVcInThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the incoming throughput in bits/sec
for this virtual circuit."
::= { wfFrSwVcEntry 9 }
wfFrSwVcOutThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the outgoing throughput in bits/sec
for this virtual circuit."
::= { wfFrSwVcEntry 10 }
wfFrSwVcOutBc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Outgoing Committed Burst bits
for this virtual circuit."
::= { wfFrSwVcEntry 11 }
wfFrSwVcInBc OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Incoming Committed Burst bits
for this virtual circuit."
::= { wfFrSwVcEntry 12 }
wfFrSwVcInBcOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the Incoming Committed Burst in octets
for this virtual circuit."
::= { wfFrSwVcEntry 13 }
wfFrSwVcBecnState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the BECN state"
::= { wfFrSwVcEntry 14 }
wfFrSwVcReportedStatus OBJECT-TYPE
SYNTAX INTEGER {
acked(1),
unacked(2),
unreported(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Record keeping for circuit status"
DEFVAL { unreported }
::= { wfFrSwVcEntry 15 }
wfFrSwVcReceivedStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of a virtual circuit as reported by the network at an NNI"
DEFVAL { active }
::= { wfFrSwVcEntry 16 }
wfFrSwVcCrossNetStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of a virtual circuit as reported by
the other end of the network under
bidirectional signalling."
DEFVAL { active }
::= { wfFrSwVcEntry 17 }
wfFrSwVcXNetSent OBJECT-TYPE
SYNTAX INTEGER {
unsent(1),
sent(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Whether we have sent a cross net status
message for this VC yet."
DEFVAL { unsent }
::= { wfFrSwVcEntry 18 }
wfFrSwVcXNetReceived OBJECT-TYPE
SYNTAX INTEGER {
recv(1),
unrecv(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Whether we have received a cross net status
message for this VC during the current
polling interval."
DEFVAL { unrecv }
::= { wfFrSwVcEntry 19 }
wfFrSwVcCalledIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the IP address associated with
destination of a virtual circuit."
::= { wfFrSwVcEntry 20 }
wfFrSwVcCalledDlci OBJECT-TYPE
SYNTAX INTEGER (16..8257535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the DLCI associated with
destination of a virtual circuit."
::= { wfFrSwVcEntry 21 }
wfFrSwVcTrfPriority OBJECT-TYPE
SYNTAX INTEGER {
one(1),
two(2),
three(3),
default(999)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the traffic priority level of all the
incoming packets on this VC.
FRSW_VCPRIORITY_DEFAULT - Set all incoming user
traffic packets to the default priority used by the port.
FRSW_VCPRIORITY_ONE - Set all incoming packets to priority 1.
FRSW_VCPRIORITY_TWO - Set all incoming packets to priority 2.
FRSW_VCPRIORITY_THREE - Set all incoming packets to priority 3.
Priority 0 is reserved for network critical packets like
OSPF, FR LMI and SMDS heartbeat and is not available for
user traffic."
DEFVAL { default }
::= { wfFrSwVcEntry 22 }
wfFrSwVcCreationTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of sysUpTime when the VC
was created."
::= { wfFrSwVcEntry 23 }
wfFrSwVcLastTimeChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the value of sysUpTime when last
there was a change in VC state."
::= { wfFrSwVcEntry 24 }
wfFrSwVcTxNonDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames without the
DE bit sent on this virtual circuit over
the interface."
::= { wfFrSwVcEntry 25 }
wfFrSwVcTxNonDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets without DE bit
sent on this virtual circuit over the interface."
::= { wfFrSwVcEntry 26 }
wfFrSwVcTxDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames with DE bit
set sent on this virtual circuit over the interface."
::= { wfFrSwVcEntry 27 }
wfFrSwVcTxDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets with DE bit set
sent on this virtual circuit over the interface."
::= { wfFrSwVcEntry 28 }
wfFrSwVcSetFecnFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames sent to the
interface on which this switch set the FECN bit."
::= { wfFrSwVcEntry 29 }
wfFrSwVcSetFecnOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames sent
to the interface on which this switch set the
FECN bit."
::= { wfFrSwVcEntry 30 }
wfFrSwVcSetBecnFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames sent to the
interface on which this switch set the BECN bit."
::= { wfFrSwVcEntry 31 }
wfFrSwVcSetBecnOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames sent to the
interface on which this switch set the BECN bit."
::= { wfFrSwVcEntry 32 }
wfFrSwVcSetDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames sent to the
interface on which this switch set the DE bit."
::= { wfFrSwVcEntry 33 }
wfFrSwVcSetDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames sent to the
interface on which this switch set the DE bit."
::= { wfFrSwVcEntry 34 }
wfFrSwVcDropNonDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames received over the
interface which were discarded, excluding any frames
with the DE bit set."
::= { wfFrSwVcEntry 35 }
wfFrSwVcDropNonDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames received over
the interface which were discarded, excluding any
frames with the DE bit set."
::= { wfFrSwVcEntry 36 }
wfFrSwVcDropDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames received over the
interface, having the DE bit set, which were discarded."
::= { wfFrSwVcEntry 37 }
wfFrSwVcDropDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames received over
the interface, having the DE bit set, which
were discarded."
::= { wfFrSwVcEntry 38 }
wfFrSwVcInactiveVcDropFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how many frames were discarded because the
virtual circuit was inactive."
::= { wfFrSwVcEntry 39 }
wfFrSwVcInactiveVcDropOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates how many Octets were discarded because the
virtual circuit was inactive."
::= { wfFrSwVcEntry 40 }
wfFrSwVcRecvNonDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames received on this
virtual circuit over the interface."
::= { wfFrSwVcEntry 41 }
wfFrSwVcRecvNonDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets received on
this virtual circuit over the interface."
::= { wfFrSwVcEntry 42 }
wfFrSwVcRecvDeFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames received over the
interface with the DE bit set."
::= { wfFrSwVcEntry 43 }
wfFrSwVcRecvDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames received
over the interface with the DE bit set."
::= { wfFrSwVcEntry 44 }
wfFrSwVcRecvFecnFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames received over the
interface with the FECN bit set."
::= { wfFrSwVcEntry 45 }
wfFrSwVcRecvFecnOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames received
over the interface with the FECN bit set."
::= { wfFrSwVcEntry 46 }
wfFrSwVcRecvBecnFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of frames received over the
interface with the BECN bit set."
::= { wfFrSwVcEntry 47 }
wfFrSwVcRecvBecnOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets in frames received
over the interface with the BECN bit set."
::= { wfFrSwVcEntry 48 }
wfFrSwVcRecentNonDeOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of octets received over the
interface during the most recent sampling period."
::= { wfFrSwVcEntry 49 }
wfFrSwVcXNetErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the count of the consecutive errors
(usually timeouts) against this VC in cross-network
heartbeat polling."
::= { wfFrSwVcEntry 50 }
wfFrSwVcDropExcessBurstFrames OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of Excess Burst Frames dropped
on this virtual circuit."
::= { wfFrSwVcEntry 51 }
wfFrSwVcDropExcessBurstOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the number of Excess Burst Octets dropped
on this virtual circuit."
::= { wfFrSwVcEntry 52 }
wfFrSwVcInBeOctets OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the maximum number Incoming Excess Burst bytes
that are allowed in a configured time interval (T)."
::= { wfFrSwVcEntry 53 }
wfFrSwVcCfgInBe OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of Excess Burst in bits"
DEFVAL { 2147483647 }
::= { wfFrSwVcEntry 54 }
wfFrSwVcRedirectAction OBJECT-TYPE
SYNTAX INTEGER {
redirecttoprimary(2),
redirecttobackup(3),
switchondemand(4),
swondemandtoprimary(5),
swondemandtobackup(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Perform pvc source redirect manually or based on
cross-net updates:
'redirecttoprimary(2)' will force to switch to primary;
'redirecttobackup(3)' will force to switch to backup;
'switchondemand(4)' will switch based on cross-net
status of the primary to and from primary;
'swondemandtoprimary(5)' will switch to primary from
backup iff cross-net of primary became active;
'swondemandtobackup(6)' will switch to backup from
primary iff cross-net of primary became inactive."
DEFVAL { redirecttoprimary }
::= { wfFrSwVcEntry 55 }
wfFrSwVcRedirectType OBJECT-TYPE
SYNTAX INTEGER {
transparent(1),
intrusiven(2),
intrusivea(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Type of dte notification at switching time:
'transparent(1)' will not send notification to dte;
'intrusiven(2)' will send async update with NEW bit;
'intrusivea(3)' will send async update with A bit not set."
DEFVAL { intrusivea }
::= { wfFrSwVcEntry 56 }
wfFrSwVcRedirectState OBJECT-TYPE
SYNTAX INTEGER {
backupinactive(1),
primaryactive(2),
switchtobackup(3),
backupactive(12),
switchtoprimary(13),
holddown(21)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PVC Source Redirect State:
'backupinactive(1)' - backup is not configured and/or cross-net status
is inactive; will allow traffic only through primary.
'primaryactive(2)' - both primary and backup rx'ed 'active' cross-net
status, currently primary is active and traffic only
through primary.
'switchtobackup(3)' - primary cross-net status is inactive, but can
not switch to backup due to manual (or semi-manual)
operation of the redirect; will allow traffic only
through primary.
'backupactive(12)' - cross-net status is 'inactive' for primary;
will allow traffic only through backup.
'switchtoprimary(13)' - cross-net status is 'active' for primary,
should by can not switch to primary due to manual
(or semi-manual) operation of the redirect; will
allow traffic only through backup.
'holddown(21)' - down state used as intermediate state at switching time
(for not more then a second); all traffic is dropped."
DEFVAL { backupinactive }
::= { wfFrSwVcEntry 57 }
wfFrSwVcBackupCalledIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Backup Called Ip Address of the remote end of the PVC."
::= { wfFrSwVcEntry 58 }
wfFrSwVcBackupCalledDlci OBJECT-TYPE
SYNTAX INTEGER (16..8257535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Backup Called Dlci of the remote end of the PVC."
::= { wfFrSwVcEntry 59 }
wfFrSwVcBackupCrossNetStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cross net status of the backup remote end of the PVC."
DEFVAL { inactive }
::= { wfFrSwVcEntry 60 }
wfFrSwVcBackupCrossNetErrors OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Support counter of missed cross net update from backup
remote end of the PVC, range: [0, wfFrSwDlcmiCrossNetErrorThreshold]."
::= { wfFrSwVcEntry 61 }
wfFrSwVcAtmIwfMode OBJECT-TYPE
SYNTAX INTEGER {
atmDisableIwfMode(1),
atmServiceIwfTransparentMode(2),
atmServiceIwfTranslationMode(3),
atmNetworkIwfMode(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute indicates the mode of FR-ATM interworking over
this FR PVC or that FR-ATM interworking is not enabled on it."
DEFVAL { atmDisableIwfMode }
::= { wfFrSwVcEntry 62 }
wfFrSwVcAtmIwfVPI OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is relevant only when the ATM/FR interworking is enabled
for this PVC. This indicates the ATM virtual path identifier
associated with the Frame Relay PVC described by this record
virtual circuit identifier."
DEFVAL { 0 }
::= { wfFrSwVcEntry 63 }
wfFrSwVcAtmIwfVCI OBJECT-TYPE
SYNTAX INTEGER (32..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is relevant only when FR/ATM interworking is enabled
for this PVC. This indicates the ATM virtual circuit
identifier associated with the Frame Relay PVC described by
this record."
DEFVAL { 32 }
::= { wfFrSwVcEntry 64 }
wfFrSwVcAtmIwfLossPriorityPolicy OBJECT-TYPE
SYNTAX INTEGER {
atmiwfmapDe(1),
atmiwfsetDe1(2),
atmiwfsetDe0(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is relevant only when FR/ATM interworking is enabled
for this FR PVC. This indicates the policy for translating
ATM CLP to FR DE on this PVC or simply setting FR DE to a
constant value for all frames."
DEFVAL { atmiwfmapDe }
::= { wfFrSwVcEntry 65 }
wfFrSwVcAtmIwfDePolicy OBJECT-TYPE
SYNTAX INTEGER {
atmiwfmapClp(1),
atmiwfsetClp1(2),
atmiwfsetClp0(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is relevant only when FR/ATM interworking is enabled
for this FR PVC. This indicates the policy on this PVC for
translating FR DE to ATM CLP or simply setting CLP to a
constant value for all frames."
DEFVAL { atmiwfmapClp }
::= { wfFrSwVcEntry 66 }
wfFrSwVcAtmIwfEfciPolicy OBJECT-TYPE
SYNTAX INTEGER {
atmiwfmapFecn(1),
atmiwfsetFecn1(2),
atmiwfsetFecn0(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is relevant only when FR/ATM interworking is enabled
for this FR PVC. This indicates the policy on this PVC for
translating FR FECN to ATM EFCI or simply setting ATM EFCI
to a constant value for all frames."
DEFVAL { atmiwfmapFecn }
::= { wfFrSwVcEntry 67 }
wfFrSwVcEscapeEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Identifies this PVC as either a standard FRSW PVC (escape
disabled) or an Escape PVC (escape enabled). The type of
Escape PVC (ingress node or egress node) is specified in the
wfFrSwDlcmiEntry Object."
DEFVAL {disabled }
::= { wfFrSwVcEntry 68 }
wfFrSwVcSpvcCallState OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
inprogress(2),
active(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates to the state of the SPVC call for this DLCI."
DEFVAL {inactive }
::= { wfFrSwVcEntry 69 }
wfFrSwVcCallReqCalledAddr OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Called E.164/X.121 Address for an SPVC Call Request
Agent. The address type is determined by the
wfFrSwDlcmiL2AddrType attribute in wfFrSwDlcmiEntry."
::= { wfFrSwVcEntry 70 }
wfFrSwVcCallReqDlciSelectionType OBJECT-TYPE
SYNTAX INTEGER {
any(1),
specific(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates to the Calling End of an SPVC Call Request whether
to use any available DLCI, or a specific DLCI. If 'specific'
is chosen, the called DLCI value is specified in
wfFrSwVcCallReqCalledDlci."
DEFVAL { any }
::= { wfFrSwVcEntry 71 }
wfFrSwVcCallReqCalledDlci OBJECT-TYPE
SYNTAX INTEGER (16..8257535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates to the Calling End of an SPVC Call Request the
DLCI to be used at the destination of a virtual circuit.
This value should be specified when 'specific'
wfFrSwVcCallReqDlciSelectionType is chosen."
::= { wfFrSwVcEntry 72 }
wfFrSwVcCallReqRetryTimer OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number of minutes the Call Request Agent should
wait for an SPVC CONNECT message before declaring a Call Setup
request REJECTED."
DEFVAL { 3 }
::= { wfFrSwVcEntry 73 }
wfFrSwVcCallReqMaxRetries OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the number of times the Call Request Agent should
retry failed Call Setup requests before declaring the SPVC
invalid."
DEFVAL { 2147483647 }
::= { wfFrSwVcEntry 74 }
wfFrSwIsdnBaseTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwIsdnBaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is a FRSW over ISDN configuration table. This
table specifies whether the Calling Party (ANI) or Called
Party (DNIS) ISDN Phone Number should be used to map
the ISDN call to a particular FRSW UNI. The table is
indexed by the Slot Number where the PRI(s) exist."
::= { wfFrswGroup 8 }
wfFrSwIsdnBaseEntry OBJECT-TYPE
SYNTAX WfFrSwIsdnBaseEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Instance Id for this table."
INDEX { wfFrSwIsdnBaseSlotNum }
::= { wfFrSwIsdnBaseTable 1 }
WfFrSwIsdnBaseEntry ::= SEQUENCE {
wfFrSwIsdnBaseDelete
INTEGER,
wfFrSwIsdnBaseSlotNum
INTEGER,
wfFrSwIsdnBaseAssocType
INTEGER
}
wfFrSwIsdnBaseDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this FRSW ISDN interface. "
DEFVAL { created }
::= { wfFrSwIsdnBaseEntry 1 }
wfFrSwIsdnBaseSlotNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This number is the Slot Number for the PRI interface(s)
that are being configured for FRSW ISDN. There will be
one of these tables for every slot where an FRSW ISDN
PRI Interface exists."
::= { wfFrSwIsdnBaseEntry 2 }
wfFrSwIsdnBaseAssocType OBJECT-TYPE
SYNTAX INTEGER {
dnis(1),
ani(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates which ISDN Phone Number (ANI or DNIS)
to use to do the ISDN call to FRSW UNI mapping."
DEFVAL { dnis }
::= { wfFrSwIsdnBaseEntry 3 }
wfFrSwIsdnAssocTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwIsdnAssocEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table defines the Association Table
to be used for the FRSW over ISDN application.
The table contains a list of ISDN Phone
Numbers and the associated FRSW UNI Index Number.
The table is indexed by the Slot Number and the
ISDN Phone Number."
::= { wfFrswGroup 9 }
wfFrSwIsdnAssocEntry OBJECT-TYPE
SYNTAX WfFrSwIsdnAssocEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Instance Id for this table."
INDEX { wfFrSwIsdnAssocSlotNum,
wfFrSwIsdnAssocNum }
::= { wfFrSwIsdnAssocTable 1 }
WfFrSwIsdnAssocEntry ::= SEQUENCE {
wfFrSwIsdnAssocDelete
INTEGER,
wfFrSwIsdnAssocSlotNum
INTEGER,
wfFrSwIsdnAssocNum
OCTET STRING,
wfFrSwIsdnAssocScrnEnable
INTEGER,
wfFrSwIsdnAssocIndex
INTEGER
}
wfFrSwIsdnAssocDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this Association Instance."
DEFVAL { created }
::= { wfFrSwIsdnAssocEntry 1 }
wfFrSwIsdnAssocSlotNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot with which this ISDN Phone Number is associated."
::= { wfFrSwIsdnAssocEntry 2 }
wfFrSwIsdnAssocNum OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ISDN Phone Number that is used to look up the
appropriate FRSW UNI Index. This number is
compared with either the Calling Party Number (ANI)
Information Element or the Called Party Number (DNIS)
Information Element contained in the ISDN Call
Setup Message."
::= { wfFrSwIsdnAssocEntry 3 }
wfFrSwIsdnAssocScrnEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicate whether allowed screening should be
enabled or disabled for all of the UNIs
contained in the FRSW UNI Index."
DEFVAL { disabled }
::= { wfFrSwIsdnAssocEntry 4 }
wfFrSwIsdnAssocIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A number that indicates the FRSW UNI Index that is
is associated with the ISDN Phone Number. This
FRSW UNI Index is used as a key to obtain the UNIs and
the Screening information from the wfFrSwIsdnScrnEntry and
wfFrSwIsdnUniEntry mibs. The default for the index is
2**31 - 1 = 2147483647 = 0x7FFFFFFF, which represents
an unconfigured index number."
DEFVAL { 2147483647 }
::= { wfFrSwIsdnAssocEntry 5 }
wfFrSwIsdnUniTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwIsdnUniEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used by the FRSW over ISDN
application. The table defines a list
of FRSW UNIs that are to be collected into
a hunt group identifiable by an Index Number."
::= { wfFrswGroup 10 }
wfFrSwIsdnUniEntry OBJECT-TYPE
SYNTAX WfFrSwIsdnUniEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Instance Id for this table."
INDEX { wfFrSwIsdnUniIndex,
wfFrSwIsdnUniNum }
::= { wfFrSwIsdnUniTable 1 }
WfFrSwIsdnUniEntry ::= SEQUENCE {
wfFrSwIsdnUniDelete
INTEGER,
wfFrSwIsdnUniIndex
INTEGER,
wfFrSwIsdnUniNum
INTEGER,
wfFrSwIsdnUniState
INTEGER
}
wfFrSwIsdnUniDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this FRSW UNI Index
Instance."
DEFVAL { created }
::= { wfFrSwIsdnUniEntry 1 }
wfFrSwIsdnUniIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FRSW UNI Index -- a number that identifies
a group of related FRSW UNIs that are
collected together as a hunt group. This number
ties this entry to an entry in
wfFrSwIsdnAssocEntry."
::= { wfFrSwIsdnUniEntry 2 }
wfFrSwIsdnUniNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A FRSW UNI/Circuit."
::= { wfFrSwIsdnUniEntry 3 }
wfFrSwIsdnUniState OBJECT-TYPE
SYNTAX INTEGER {
available(1),
inuse(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"State of this UNI (available or in-use)."
DEFVAL { available }
::= { wfFrSwIsdnUniEntry 4 }
wfFrSwIsdnScrnTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwIsdnScrnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the incoming call screening table
for the FRSW over ISDN application. The table
consists of a FRSW UNI Index and a list of allowable
ISDN Phone numbers for that FRSW UNI Index.
The table is indexed by both the FRSW UNI Index
and the ISDN Phone Number.
This table is referenced only when the
wfFrSwIsdnAssocScrnEnable is set to
Enabled for this FRSW UNI Index."
::= { wfFrswGroup 11 }
wfFrSwIsdnScrnEntry OBJECT-TYPE
SYNTAX WfFrSwIsdnScrnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Instance Id for this table. "
INDEX { wfFrSwIsdnScrnIndex,
wfFrSwIsdnScrnNum }
::= { wfFrSwIsdnScrnTable 1 }
WfFrSwIsdnScrnEntry ::= SEQUENCE {
wfFrSwIsdnScrnDelete
INTEGER,
wfFrSwIsdnScrnIndex
INTEGER,
wfFrSwIsdnScrnNum
OCTET STRING
}
wfFrSwIsdnScrnDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete this Scrn Instance. "
DEFVAL { created }
::= { wfFrSwIsdnScrnEntry 1 }
wfFrSwIsdnScrnIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"FRSW UNI Index - A number that ties this
entry to an entry in wfFrSwIsdnAssocEntry."
::= { wfFrSwIsdnScrnEntry 2 }
wfFrSwIsdnScrnNum OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ISDN Phone Number of a user authorized to
access the UNIs contained in the FRSW
UNI Index. "
::= { wfFrSwIsdnScrnEntry 3 }
wfFrSwSigTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwSigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The Frame relay signalling table contains frame relay
signalling entries indexed by the frame relay access
channel circuit number. An instance of wfFrSwSigEntry
is required for each frame relay access channel with
frame relay signalling enabled. The absence of
wfFrSwSigEntry for a given frame relay access channel
implies that frame relay signalling is disabled for the
circuit. Note that the terms 'incoming' and 'outgoing'
refer to the frame mode call with respect to the network
side of the interface. The terminology used by CCITT
Q.933/Q.931 is different. "
::= { wfFrswGroup 12 }
wfFrSwSigEntry OBJECT-TYPE
SYNTAX WfFrSwSigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Frame Relay signalling port
information table. "
INDEX { wfFrSwSigCircuit }
::= { wfFrSwSigTable 1 }
WfFrSwSigEntry ::= SEQUENCE {
wfFrSwSigDelete
INTEGER,
wfFrSwSigCircuit
INTEGER,
wfFrSwSigSvcDlciLow
INTEGER,
wfFrSwSigSvcDlciHigh
INTEGER,
wfFrSwSigDlciAssign
INTEGER,
wfFrSwSigMaxNumOfSvcs
INTEGER,
wfFrSwSigNumOfSvcsInUse
INTEGER,
wfFrSwSigDefaultThroughput
INTEGER,
wfFrSwSigDefaultMinAcceptThroughput
INTEGER,
wfFrSwSigDefaultBc
INTEGER,
wfFrSwSigDefaultBe
INTEGER,
wfFrSwSigMaxInThroughputPerSvc
INTEGER,
wfFrSwSigMaxOutThroughputPerSvc
INTEGER,
wfFrSwSigTotalInNegotiableThroughput
INTEGER,
wfFrSwSigTotalInCurrentThroughput
INTEGER,
wfFrSwSigTotalOutNegotiableThroughput
INTEGER,
wfFrSwSigTotalOutCurrentThroughput
INTEGER,
wfFrSwSigXNetClearingDisable
INTEGER,
wfFrSwSigCallingPartyIEMandatory
INTEGER,
wfFrSwSigT301
INTEGER,
wfFrSwSigT303
INTEGER,
wfFrSwSigT305
INTEGER,
wfFrSwSigT308
INTEGER,
wfFrSwSigT310
INTEGER,
wfFrSwSigT322
INTEGER,
wfFrSwSigInSetupPkts
Counter,
wfFrSwSigInCallProceedingPkts
Counter,
wfFrSwSigInConnectPkts
Counter,
wfFrSwSigInDisconnectPkts
Counter,
wfFrSwSigInReleasePkts
Counter,
wfFrSwSigInReleaseCompletePkts
Counter,
wfFrSwSigInStatusEnquiryPkts
Counter,
wfFrSwSigInStatusPkts
Counter,
wfFrSwSigInUnknownPkts
Counter,
wfFrSwSigOutSetupPkts
Counter,
wfFrSwSigOutCallProceedingPkts
Counter,
wfFrSwSigOutConnectPkts
Counter,
wfFrSwSigOutDisconnectPkts
Counter,
wfFrSwSigOutReleasePkts
Counter,
wfFrSwSigOutReleaseCompletePkts
Counter,
wfFrSwSigOutStatusEnquiryPkts
Counter,
wfFrSwSigOutStatusPkts
Counter,
wfFrSwSigRejectedConnRequests
Counter,
wfFrSwSigNwrkAbortedConnections
Counter,
wfFrSwSigL2Resets
Counter,
wfFrSwSigDlciIEAllowed
INTEGER,
wfFrSwSigX213PriorityIEAllowed
INTEGER,
wfFrSwSigMaximumBe
INTEGER
}
wfFrSwSigDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete this instance "
DEFVAL { created }
::= { wfFrSwSigEntry 1 }
wfFrSwSigCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The circuit number for this frame relay access channel "
::= { wfFrSwSigEntry 2 }
wfFrSwSigSvcDlciLow OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Lowest DLCI to be used for SVC, the default value
is for 2 octet frame header "
DEFVAL { 16 }
::= { wfFrSwSigEntry 3 }
wfFrSwSigSvcDlciHigh OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Highest DLCI to be used for SVC, the default value
is for 2 octet frame header. "
DEFVAL { 991 }
::= { wfFrSwSigEntry 4 }
wfFrSwSigDlciAssign OBJECT-TYPE
SYNTAX INTEGER {
increment(1),
decrement(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Determines if DLCI's are assigned starting
at wfFrSwSigSvcDlciHigh and working towards
wfFrSwSigSvcDlciLow or vice versa. "
DEFVAL { decrement }
::= { wfFrSwSigEntry 5 }
wfFrSwSigMaxNumOfSvcs OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicates the maximum number of simultaneous switched
virtual circuits allowed on the logical line. "
DEFVAL { 100 }
::= { wfFrSwSigEntry 6 }
wfFrSwSigNumOfSvcsInUse OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates the number of switched virtual circuits
in use on the logical line. "
::= { wfFrSwSigEntry 7 }
wfFrSwSigDefaultThroughput OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value is used by the network in the Link Layer
Core Parameters IE incoming & outgoing throughput
fields when they are not included in the setup message
by the user. "
DEFVAL { 0 }
::= { wfFrSwSigEntry 8 }
wfFrSwSigDefaultMinAcceptThroughput OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value is used by the network in the Link Layer
Core Parameters IE incoming & outgoing minimum acceptable
throughput fields when they are not included in the
setup message by the user. "
DEFVAL { 0 }
::= { wfFrSwSigEntry 9 }
wfFrSwSigDefaultBc OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This value is used by the network in the Link Layer
Core Parameters IE incoming & outgoing Bc fields when
they are not included in the setup message by the user. "
::= { wfFrSwSigEntry 10 }
wfFrSwSigDefaultBe OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This value is used by the network in the Link Layer
Core Parameters IE incoming & outgoing Be fields when
they are not included in the setup message by the user. "
DEFVAL { 2147483647 }
::= { wfFrSwSigEntry 11 }
wfFrSwSigMaxInThroughputPerSvc OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the maximum incoming throughput that any
single SVC may negotiate for a call. Calls requesting
in excess of this attribute are rejected. "
DEFVAL { 2147483647 }
::= { wfFrSwSigEntry 12 }
wfFrSwSigMaxOutThroughputPerSvc OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the maximum outgoing throughput that any
single SVC may negotiate for a call. Calls requesting
in excess of this attribute are rejected. "
DEFVAL { 2147483647 }
::= { wfFrSwSigEntry 13 }
wfFrSwSigTotalInNegotiableThroughput OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the total maximum incoming throughput that is
available for all frame mode calls on the port. If the
sum of the incoming throughput requested by a call
and wfFrSwSigTotalInCurrentThroughput is in excess of
this value, the call is rejected. "
DEFVAL { 2147483647 }
::= { wfFrSwSigEntry 14 }
wfFrSwSigTotalInCurrentThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This is the total incoming throughput that has been
negotiated for use by all SVC's on the port. "
::= { wfFrSwSigEntry 15 }
wfFrSwSigTotalOutNegotiableThroughput OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the total maximum outgoing throughput that is
available for all frame mode calls on the port. If the
sum of the outgoing throughput requested by a call
and wfFrSwSigTotalOutCurrentThroughput is in excess of
this value, the call is rejected. "
DEFVAL { 2147483647 }
::= { wfFrSwSigEntry 16 }
wfFrSwSigTotalOutCurrentThroughput OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This is the total incoming throughput that has been
negotiated for use by all SVC's on the port. "
::= { wfFrSwSigEntry 17 }
wfFrSwSigXNetClearingDisable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If cross-net polling (wfFrSwDlcmiCrossNetEnable) is
enabled on this interface, and the error threshold
(wfFrSwDlcmiCrossNetErrorThreshold) is exceeded, the
network can clear the call. "
DEFVAL { enable }
::= { wfFrSwSigEntry 18 }
wfFrSwSigCallingPartyIEMandatory OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Reject the call if the Calling Party IE is absent in the
setup message or if the provided Calling Party IE fails
address authentication tests againt the configured
address(es) on the ingress logical line."
DEFVAL { disabled }
::= { wfFrSwSigEntry 19 }
wfFrSwSigT301 OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timer number: T301
default time-out: 3 min
state of call: call initiated
cause for start: incoming setup
normal stop: outgoing connect
at the first expiry: clear call
at the second expiry: timer not restarted "
DEFVAL { 3 }
::= { wfFrSwSigEntry 20 }
wfFrSwSigT303 OBJECT-TYPE
SYNTAX INTEGER (2..90)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timer number: T303
default time-out: 4 s
state of call: call present
cause for start: outgoing setup
normal stop: incoming connect/call-proceeding/
release-complete
at the first expiry: retransmit setup, restart T303
at the second expiry: clear call "
DEFVAL { 4 }
::= { wfFrSwSigEntry 21 }
wfFrSwSigT305 OBJECT-TYPE
SYNTAX INTEGER (20..90)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timer number: T305
default time-out: 30 s
state of call: disconnect ind
cause for start: outgoing disconnect
normal stop: incoming release/disconnect
at the first expiry: outgoing release
at the second expiry: timer not restarted "
DEFVAL { 30 }
::= { wfFrSwSigEntry 22 }
wfFrSwSigT308 OBJECT-TYPE
SYNTAX INTEGER (2..90)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timer number: T308
default time-out: 4 s
state of call: release req
cause for start: outgoing release
normal stop: incoming release/release-complete
at the first expiry: retransmit release, restart T308
at the second expiry: place access channel in maintenance "
DEFVAL { 4 }
::= { wfFrSwSigEntry 23 }
wfFrSwSigT310 OBJECT-TYPE
SYNTAX INTEGER (2..90)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timer number: T310
default time-out: 10 s
state of call: incoming call proceeding
cause for start: incoming call proceeding
normal stop: incoming connect/disconnect
at the first expiry: clear call
at the second expiry: timer not restarted "
DEFVAL { 10 }
::= { wfFrSwSigEntry 24 }
wfFrSwSigT322 OBJECT-TYPE
SYNTAX INTEGER (2..90)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Timer number: T322
default time-out: 4 s
state of call: any call state
cause for start: outgoing status enquiry
normal stop: incoming status/disconnect/
release/release-complete
at the first expiry: retransmit status-enq, restart T322
at the second expiry: resend status enq and restart T322 "
DEFVAL { 4 }
::= { wfFrSwSigEntry 25 }
wfFrSwSigInSetupPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming setup packets "
::= { wfFrSwSigEntry 26 }
wfFrSwSigInCallProceedingPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming call proceeding packets "
::= { wfFrSwSigEntry 27 }
wfFrSwSigInConnectPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming connect packets "
::= { wfFrSwSigEntry 28 }
wfFrSwSigInDisconnectPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming disconnect packets "
::= { wfFrSwSigEntry 29 }
wfFrSwSigInReleasePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming release packets "
::= { wfFrSwSigEntry 30 }
wfFrSwSigInReleaseCompletePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming release complete packets "
::= { wfFrSwSigEntry 31 }
wfFrSwSigInStatusEnquiryPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming status enquiry packets "
::= { wfFrSwSigEntry 32 }
wfFrSwSigInStatusPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming status packets "
::= { wfFrSwSigEntry 33 }
wfFrSwSigInUnknownPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of incoming unknown packets "
::= { wfFrSwSigEntry 34 }
wfFrSwSigOutSetupPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing setup packets "
::= { wfFrSwSigEntry 35 }
wfFrSwSigOutCallProceedingPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing call proceeding packets "
::= { wfFrSwSigEntry 36 }
wfFrSwSigOutConnectPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing connect packets "
::= { wfFrSwSigEntry 37 }
wfFrSwSigOutDisconnectPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing disconnect packets "
::= { wfFrSwSigEntry 38 }
wfFrSwSigOutReleasePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing release packets "
::= { wfFrSwSigEntry 39 }
wfFrSwSigOutReleaseCompletePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing release packest "
::= { wfFrSwSigEntry 40 }
wfFrSwSigOutStatusEnquiryPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing status enquiry packets "
::= { wfFrSwSigEntry 41 }
wfFrSwSigOutStatusPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of outgoing status packets "
::= { wfFrSwSigEntry 42 }
wfFrSwSigRejectedConnRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of connections rejected "
::= { wfFrSwSigEntry 43 }
wfFrSwSigNwrkAbortedConnections OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of connections aborted by network "
::= { wfFrSwSigEntry 44 }
wfFrSwSigL2Resets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of L2 resets "
::= { wfFrSwSigEntry 45 }
wfFrSwSigDlciIEAllowed OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Reject the call if the Dlci IE is present in the setup
message and wfFrSwSigDlciIEAllowed is set to disabled."
DEFVAL { enabled }
::= { wfFrSwSigEntry 46 }
wfFrSwSigX213PriorityIEAllowed OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Reject the call if the X213 Priority IE is present in
setup message and wfFrSwSigX213PriorityIEAllowed is set
to disabled."
DEFVAL { enabled }
::= { wfFrSwSigEntry 47 }
wfFrSwSigMaximumBe OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the maximum allowed Be for a SVC connection"
DEFVAL {2147483647}
::= { wfFrSwSigEntry 48 }
wfFrSwGlobalE164AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwGlobalE164AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" wfFrSwGlobalE164AddrTable is used by Directory Services
to translate a range of E.164 addresses into an
internal IP network address. E.164 ranges must not ever overlap. "
::= { wfFrswGroup 13 }
wfFrSwGlobalE164AddrEntry OBJECT-TYPE
SYNTAX WfFrSwGlobalE164AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Frame Relay Global E.164 Address Table. "
INDEX { wfFrSwGlobalE164AddrLow,
wfFrSwGlobalE164AddrHigh }
::= { wfFrSwGlobalE164AddrTable 1 }
WfFrSwGlobalE164AddrEntry ::= SEQUENCE {
wfFrSwGlobalE164AddrDelete
INTEGER,
wfFrSwGlobalE164AddrLow
OCTET STRING,
wfFrSwGlobalE164AddrHigh
OCTET STRING,
wfFrSwGlobalE164AddrIPAddr
IpAddress
}
wfFrSwGlobalE164AddrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete/create this entry. "
DEFVAL { created }
::= { wfFrSwGlobalE164AddrEntry 1 }
wfFrSwGlobalE164AddrLow OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; the low end of the E.164
address range. This is an 8-byte fixed length octet
string format, right justified with padded leading zeros
as necessary. "
::= { wfFrSwGlobalE164AddrEntry 2 }
wfFrSwGlobalE164AddrHigh OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; the high end of the E.164
address range. This is an 8-byte fixed length octet
string format, right justified with padded leading zeros
as necessary. "
::= { wfFrSwGlobalE164AddrEntry 3 }
wfFrSwGlobalE164AddrIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the internal IP network address associated with
this range of E.164 addresses. "
::= { wfFrSwGlobalE164AddrEntry 4 }
wfFrSwGlobalX121AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwGlobalX121AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" wfFrSwGlobalX121AddrTable is used by Directory Services
to translate a range of X.121 addresses into an
internal IP network address. X.121 ranges must not ever overlap. "
::= { wfFrswGroup 14 }
wfFrSwGlobalX121AddrEntry OBJECT-TYPE
SYNTAX WfFrSwGlobalX121AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Frame Relay Global X.121 Address Table. "
INDEX { wfFrSwGlobalX121AddrLow,
wfFrSwGlobalX121AddrHigh }
::= { wfFrSwGlobalX121AddrTable 1 }
WfFrSwGlobalX121AddrEntry ::= SEQUENCE {
wfFrSwGlobalX121AddrDelete
INTEGER,
wfFrSwGlobalX121AddrLow
OCTET STRING,
wfFrSwGlobalX121AddrHigh
OCTET STRING,
wfFrSwGlobalX121AddrIPAddr
IpAddress
}
wfFrSwGlobalX121AddrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete/create this entry. "
DEFVAL { created }
::= { wfFrSwGlobalX121AddrEntry 1 }
wfFrSwGlobalX121AddrLow OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; the low end of the X.121
address range. This is an 8-byte fixed length octet
string format, right justified with padded leading zeros
as necessary. "
::= { wfFrSwGlobalX121AddrEntry 2 }
wfFrSwGlobalX121AddrHigh OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; the high end of the X.121
address range. This is an 8-byte fixed length octet
string format, right justified with padded leading zeros
as necessary. "
::= { wfFrSwGlobalX121AddrEntry 3 }
wfFrSwGlobalX121AddrIPAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the internal IP network address associated with
this range of X.121 addresses. "
::= { wfFrSwGlobalX121AddrEntry 4 }
wfFrSwLocalE164AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwLocalE164AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" wfFrSwLocalE164AddrTable contains E.164 addresses on the
local BNX and CUG (Closed User Group) related information. "
::= { wfFrswGroup 15 }
wfFrSwLocalE164AddrEntry OBJECT-TYPE
SYNTAX WfFrSwLocalE164AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Frame Relay Local E.164 Address Table. "
INDEX { wfFrSwLocalE164AddrCct,
wfFrSwLocalE164Address }
::= { wfFrSwLocalE164AddrTable 1 }
WfFrSwLocalE164AddrEntry ::= SEQUENCE {
wfFrSwLocalE164AddrDelete
INTEGER,
wfFrSwLocalE164AddrCct
INTEGER,
wfFrSwLocalE164Address
OCTET STRING,
wfFrSwLocalE164AddrCUG
OCTET STRING,
wfFrSwLocalE164AddrLocalFlag
INTEGER
}
wfFrSwLocalE164AddrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete/create this entry. "
DEFVAL { created }
::= { wfFrSwLocalE164AddrEntry 1 }
wfFrSwLocalE164AddrCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; internal CCT number associated
with this E.164 address. "
::= { wfFrSwLocalE164AddrEntry 2 }
wfFrSwLocalE164Address OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; an E.164 address.
This is an 8-byte fixed length octet string format,
right justified with padded leading zeros as necessary. "
::= { wfFrSwLocalE164AddrEntry 3 }
wfFrSwLocalE164AddrCUG OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" CUG (Closed User Group) information.
The structure of the CUG information consists zero or
more groups (number of groups can be derived from the
OCTET STRING data type of this MIB attribute) of COI
structure information. Each COI structure consists of
a COI group number (4-byte integer) and a COI list.
Each COI list consists of a length field (4-byte integer)
which specifies the number of bytes of COI bit-encoded
information belonging to this group and the COI information
structure. COI information structure is a bit mask field
where each bit from left to right represents whether this
E.164 address belongs to a particular COI number within this
COI group number.
Please note that COI group numbers can not be repeated and
that the COI group numbers must be in increasing order in the
CUG configuration MIB
wfFrSwLocalE164AddrCUG defaults to zero COI groups which
means no CUG related information and hence this local
wfFrSwLocalE164Address is allowed to communicate with
all users. "
::= { wfFrSwLocalE164AddrEntry 4 }
wfFrSwLocalE164AddrLocalFlag OBJECT-TYPE
SYNTAX INTEGER {
local(1),
nonlocal(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Local/Non-Local Identifier Flag. Used for SPVCs."
DEFVAL { local }
::= { wfFrSwLocalE164AddrEntry 5 }
wfFrSwLocalX121AddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwLocalX121AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" wfFrSwLocalX121AddrTable contains X.121 addresses on the
local BNX and CUG (Closed User Group) related information. "
::= { wfFrswGroup 16 }
wfFrSwLocalX121AddrEntry OBJECT-TYPE
SYNTAX WfFrSwLocalX121AddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Frame Relay Local X.121 Address Table. "
INDEX { wfFrSwLocalX121AddrCct,
wfFrSwLocalX121Address }
::= { wfFrSwLocalX121AddrTable 1 }
WfFrSwLocalX121AddrEntry ::= SEQUENCE {
wfFrSwLocalX121AddrDelete
INTEGER,
wfFrSwLocalX121AddrCct
INTEGER,
wfFrSwLocalX121Address
OCTET STRING,
wfFrSwLocalX121AddrCUG
OCTET STRING,
wfFrSwLocalX121AddrLocalFlag
INTEGER
}
wfFrSwLocalX121AddrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete/create this entry. "
DEFVAL { created }
::= { wfFrSwLocalX121AddrEntry 1 }
wfFrSwLocalX121AddrCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; internal CCT number associated
with this X.121 address. "
::= { wfFrSwLocalX121AddrEntry 2 }
wfFrSwLocalX121Address OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Instance identifier; a X.121 address.
This is an 8-byte fixed length octet string format,
right justified with padded leading zeros as necessary. "
::= { wfFrSwLocalX121AddrEntry 3 }
wfFrSwLocalX121AddrCUG OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" CUG (Closed User Group) information.
The structure of the CUG information consists zero or
more groups (number of groups can be derived from the
OCTET STRING data type of this MIB attribute) of COI
structure information. Each COI structure consists of
a COI group number (4-byte integer) and a COI list.
Each COI list consists of a length field (4-byte integer)
which specifies the number of bytes of COI bit-encoded
information belonging to this group and the COI information
structure. COI information structure is a bit mask field
where each bit from left to right represents whether this
X.121 address belongs to a particular COI number within this
COI group number.
wfFrSwLocalX121AddrCUG defaults to zero COI groups which
means no CUG related information and hence this local
wfFrSwLocalX121Address is allowed to communicate with
all users. "
::= { wfFrSwLocalX121AddrEntry 4 }
wfFrSwLocalX121AddrLocalFlag OBJECT-TYPE
SYNTAX INTEGER {
local(1),
nonlocal(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Local/Non-Local Identifier Flag. Used for SPVCs."
DEFVAL { local }
::= { wfFrSwLocalX121AddrEntry 5 }
wfFrSwBase OBJECT IDENTIFIER ::= { wfFrswGroup 17 }
wfFrSwBaseDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete/create this base group "
DEFVAL { created }
::= { wfFrSwBase 1 }
wfFrSwBaseIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicates this BNX's (circuit-less) IP address "
::= { wfFrSwBase 2 }
wfFrSwBaseShutDown OBJECT-TYPE
SYNTAX Counter
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Bit mask for slots to shutdown, slots 1-14. The MSBit
represents slot 1, the next most significant bit represents
slot 2, and so forth."
::= { wfFrSwBase 3 }
wfFrSwCngcMonTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwCngcMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used by FRSW Congestion Control application.
The table is used to Monitor the congestion level of a
particular circuit."
::= { wfFrswGroup 18 }
wfFrSwCngcMonEntry OBJECT-TYPE
SYNTAX WfFrSwCngcMonEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Instance Id for this table."
INDEX { wfFrSwCngcMonCct }
::= { wfFrSwCngcMonTable 1 }
WfFrSwCngcMonEntry ::= SEQUENCE {
wfFrSwCngcMonReset
INTEGER,
wfFrSwCngcMonCct
INTEGER,
wfFrSwCngcMonP0Level1Percent
Gauge,
wfFrSwCngcMonP0Level2Percent
Gauge,
wfFrSwCngcMonP0Level3Percent
Gauge,
wfFrSwCngcMonP0Level4Percent
Gauge,
wfFrSwCngcMonP1Level1Percent
Gauge,
wfFrSwCngcMonP1Level2Percent
Gauge,
wfFrSwCngcMonP1Level3Percent
Gauge,
wfFrSwCngcMonP1Level4Percent
Gauge,
wfFrSwCngcMonP2Level1Percent
Gauge,
wfFrSwCngcMonP2Level2Percent
Gauge,
wfFrSwCngcMonP2Level3Percent
Gauge,
wfFrSwCngcMonP2Level4Percent
Gauge,
wfFrSwCngcMonP3Level1Percent
Gauge,
wfFrSwCngcMonP3Level2Percent
Gauge,
wfFrSwCngcMonP3Level3Percent
Gauge,
wfFrSwCngcMonP3Level4Percent
Gauge
}
wfFrSwCngcMonReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to reset Cngc Monitor Counters."
::= { wfFrSwCngcMonEntry 1 }
wfFrSwCngcMonCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Circuit to be monitored. "
::= { wfFrSwCngcMonEntry 2 }
wfFrSwCngcMonP0Level1Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 1.
for Priority 0 Traffic."
::= { wfFrSwCngcMonEntry 3 }
wfFrSwCngcMonP0Level2Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 2.
for Priority 0 Traffic."
::= { wfFrSwCngcMonEntry 4 }
wfFrSwCngcMonP0Level3Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 3.
for Priority 0 Traffic."
::= { wfFrSwCngcMonEntry 5 }
wfFrSwCngcMonP0Level4Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 4.
for Priority 0 Traffic."
::= { wfFrSwCngcMonEntry 6 }
wfFrSwCngcMonP1Level1Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 1.
for Priority 1 Traffic."
::= { wfFrSwCngcMonEntry 7 }
wfFrSwCngcMonP1Level2Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 2.
for Priority 1 Traffic."
::= { wfFrSwCngcMonEntry 8 }
wfFrSwCngcMonP1Level3Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 3.
for Priority 1 Traffic."
::= { wfFrSwCngcMonEntry 9 }
wfFrSwCngcMonP1Level4Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 4.
for Priority 1 Traffic."
::= { wfFrSwCngcMonEntry 10 }
wfFrSwCngcMonP2Level1Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 1.
for Priority 2 Traffic."
::= { wfFrSwCngcMonEntry 11 }
wfFrSwCngcMonP2Level2Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 2.
for Priority 2 Traffic."
::= { wfFrSwCngcMonEntry 12 }
wfFrSwCngcMonP2Level3Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 3.
for Priority 2 Traffic."
::= { wfFrSwCngcMonEntry 13 }
wfFrSwCngcMonP2Level4Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 4.
for Priority 2 Traffic."
::= { wfFrSwCngcMonEntry 14 }
wfFrSwCngcMonP3Level1Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 1.
for Priority 3 Traffic."
::= { wfFrSwCngcMonEntry 15 }
wfFrSwCngcMonP3Level2Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 2.
for Priority 3 Traffic."
::= { wfFrSwCngcMonEntry 16 }
wfFrSwCngcMonP3Level3Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 3.
for Priority 3 Traffic."
::= { wfFrSwCngcMonEntry 17 }
wfFrSwCngcMonP3Level4Percent OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Percentage of time congestion is at level 4.
for Priority 3 Traffic."
::= { wfFrSwCngcMonEntry 18 }
wfFrSwVirtualIntfTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwVirtualIntfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The table is used to create 'virtual' FRSW access lines."
::= { wfFrswGroup 19 }
wfFrSwVirtualIntfEntry OBJECT-TYPE
SYNTAX WfFrSwVirtualIntfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Instance Id for this table."
INDEX { wfFrSwVirtualIntfSlot,
wfFrSwVirtualIntfCct }
::= { wfFrSwVirtualIntfTable 1 }
WfFrSwVirtualIntfEntry ::= SEQUENCE {
wfFrSwVirtualIntfDelete
INTEGER,
wfFrSwVirtualIntfSlot
INTEGER,
wfFrSwVirtualIntfCct
INTEGER,
wfFrSwVirtualIntfLineNum
INTEGER
}
wfFrSwVirtualIntfDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indication to delete this virtual interface."
DEFVAL { created }
::= { wfFrSwVirtualIntfEntry 1 }
wfFrSwVirtualIntfSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier; the slot number of this interface."
::= { wfFrSwVirtualIntfEntry 2 }
wfFrSwVirtualIntfCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier; the circuit number of this interface."
::= { wfFrSwVirtualIntfEntry 3 }
wfFrSwVirtualIntfLineNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Line number for this virtual interface."
::= { wfFrSwVirtualIntfEntry 4 }
wfFrSwExtFileSysTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfFrSwExtFileSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table is used by FRSW to extend the file system
to DRAM device."
::= { wfFrswGroup 20 }
wfFrSwExtFileSysEntry OBJECT-TYPE
SYNTAX WfFrSwExtFileSysEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Instance Id for this table."
INDEX { wfFrSwExtFileSysSlot }
::= { wfFrSwExtFileSysTable 1 }
WfFrSwExtFileSysEntry ::= SEQUENCE {
wfFrSwExtFileSysDelete
INTEGER,
wfFrSwExtFileSysSlot
INTEGER,
wfFrSwExtFileSysSize
INTEGER,
wfFrSwExtFileSysActualSize
INTEGER,
wfFrSwExtFileSysState
INTEGER
}
wfFrSwExtFileSysDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indication to delete/create this entry. "
DEFVAL { created }
::= { wfFrSwExtFileSysEntry 1 }
wfFrSwExtFileSysSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each slot.
Its value ranges between 1 and 14."
::= { wfFrSwExtFileSysEntry 2 }
wfFrSwExtFileSysSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The memory size of the extended file system in
byte unit. The value zero also means that extended
file system is disabled. Non-zero value
means enabled. Its suggested that the size
is in multiple of 128k bytes.
Some of the well-known memory sizes and their correspond
decimal values are as followed:
Mem size Decimal Value
^^^^^^^^ ^^^^^^^^^^^^^
128K 131072
256K 262144
512K 524288
1M 1048576
2M 2097152
4M 4194304
8M 8388608
"
DEFVAL { 0 }
::= { wfFrSwExtFileSysEntry 3 }
wfFrSwExtFileSysActualSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The actual memory size the system allocated."
DEFVAL { 0 }
::= { wfFrSwExtFileSysEntry 4 }
wfFrSwExtFileSysState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
fault(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the extended file system.
State up indicates that the requested memory size
for the extended file system has been allocated
successfully and the extended file system is in
operational state.
State fault indicates that the requested memory size
for the extended file system has NOT been allocated
successfully and the extended file system is NOT
in operational state. One reason for entering the
fault state is insufficient available memory.
State init indicates that the system is in the
initialization cycle. The extended file system
is not operational.
State notpresent reflects the size of zero."
DEFVAL { notpresent }
::= { wfFrSwExtFileSysEntry 5 }
END