Wellfleet-OSI-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter, Opaque
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
wfOsiGroup
FROM Wellfleet-COMMON-MIB;
wfOsi OBJECT IDENTIFIER ::= { wfOsiGroup 1 }
wfOsiDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether OSI is configured on this slot."
DEFVAL { created }
::= { wfOsi 1 }
wfOsiDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether OSI is to startup."
DEFVAL { enabled }
::= { wfOsi 2 }
wfOsiState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value determines whether OSI is to startup."
DEFVAL { notpresent }
::= { wfOsi 3 }
wfOsiIsisVersion OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This read-only parameter identifies the version number of the
IS-IS protocol to which this node conforms to. "
::= { wfOsi 4 }
wfOsiRouterType OBJECT-TYPE
SYNTAX INTEGER {
l1only(1),
l1l2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether this system is an L1-only router or
L1-L2 IS."
DEFVAL { l1l2 }
::= { wfOsi 5 }
wfOsiRouterId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value contains the system ID of this Intermediate System.
If no value is entered by the user, Site Manager should
supply a 6-byte value that will be unique (a MAC address
would work).
"
::= { wfOsi 6 }
wfOsiLoadBal OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Boolean defines whether or not we are doing load balancing
over multiple paths."
DEFVAL { disabled }
::= { wfOsi 7 }
wfOsiMaxAreas OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value defines the maximum allowable number of areas addresses
for the domain that this router exists in."
DEFVAL { 63 }
::= { wfOsi 8 }
wfOsiMaxEs OBJECT-TYPE
SYNTAX INTEGER(1..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value defines the maximum allowable number of End Systems
for the area that this router exists in."
DEFVAL { 512 }
::= { wfOsi 9 }
wfOsiMaxL1Is OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value defines the maximum allowable number of L1 Intermediate
Systems for the area that this router exists in."
DEFVAL { 15 }
::= { wfOsi 10 }
wfOsiMaxL2Is OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value defines the maximum allowable number of L2 Intermediate
Systems for the domain that this router exists in."
DEFVAL { 63 }
::= { wfOsi 11 }
wfOsiMaxExtAddr OBJECT-TYPE
SYNTAX INTEGER(1..500)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value defines the maximum allowable number of External Addresses
for the domain that this router exists in.
The default value of this field is 0."
DEFVAL { 1 }
::= { wfOsi 12 }
wfOsiCksumIsPdus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value indicates whether ISIS PDUs will carry a checksum."
DEFVAL { enabled }
::= { wfOsi 13 }
wfOsiL1LspPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This assigns a password such that only L1 Lsps with the matching
password will be accepted. All L1 Lsps generated
by this system will contain this string in the password option."
::= { wfOsi 14 }
wfOsiL2LspPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This assigns a password such that only L2 Lsps with the matching
password will be accepted. All L2 Lsps generated
by this system will contain this string in the password option."
::= { wfOsi 15 }
wfOsiAreaAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Assigns the area address for this router.
This field must be filled in.
If the user doesn't enter a value, then assign 490040.
Site Manager must force the user to enter at least a 3-byte
value for this field.
"
::= { wfOsi 16 }
wfOsiAreaAddrAlias1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This Assigns the first area address alias for this router.
This field does no have to be filled in, but if the user
tries to enter a value, Site Manager must make sure that
it is at least 3-bytes in length."
::= { wfOsi 17 }
wfOsiAreaAddrAlias2 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS obsolete
DESCRIPTION
"This Assigns the second area address alias for this router.
This field does no have to be filled in, but if the user
tries to enter a value, Site Manager must make sure that
it is at least 3-bytes in length."
::= { wfOsi 18 }
wfOsiCorruptedLsps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Corrupted Lsps Detected."
::= { wfOsi 19 }
wfOsiL1LspDbOverloads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the L1 Lsp Database Overload event has
been generated. "
::= { wfOsi 20 }
wfOsiL2LspDbOverloads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the L2 Lsp Database Overload event has
been generated. "
::= { wfOsi 21 }
wfOsiManAddrDroppedAreas OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the Manual Address Dropped from Area event
has been generated. "
::= { wfOsi 22 }
wfOsiSeqNumberSkips OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the Sequence Number Skipped event has
been generated. "
::= { wfOsi 23 }
wfOsiOwnLspPurges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the Own Lsp Purged event has
been generated. "
::= { wfOsi 24 }
wfOsiOthLspPurges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the Other Lsp Purged event has
been generated. "
::= { wfOsi 25 }
wfOsiExceedMaxSeqNums OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times the Attempt tp Exceed Maximum Sequence Number
event has been generated. "
::= { wfOsi 26 }
wfOsiNearestL2Is OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ID of the Nearest L2 system in this area."
::= { wfOsi 27 }
wfOsiMaxDynEs OBJECT-TYPE
SYNTAX INTEGER(1..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the maximum number of dynamically learned (via Hello)
End Systems allowed per slot."
DEFVAL { 1024 }
::= { wfOsi 28 }
wfOsiMaxDynL1Is OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the maximum number of dynamically learned (via Hello)
Level 1 Intermediate Systems allowed per slot."
DEFVAL { 64 }
::= { wfOsi 29 }
wfOsiMaxDynL2Is OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the maximum number of dynamically learned (via Hello)
Level 2 Intermediate Systems allowed per slot."
DEFVAL { 64 }
::= { wfOsi 30 }
wfOsiNumDynEsAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Dynamic ES adjs the osi master gate
receives from the cct gate. "
::= { wfOsi 31 }
wfOsiNumDynL1Adjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Dynamic L1 adjs the osi master gate
receives from the cct gate. "
::= { wfOsi 32 }
wfOsiNumDynL2Adjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Dynamic L2 adjs the osi master gate
receives from the cct gate. "
::= { wfOsi 33 }
wfOsiNumL1Routes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of L1 Routes. WL 2.27.93"
::= { wfOsi 34 }
wfOsiNumL2Routes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of L2 Routes. WL 2.27.93"
::= { wfOsi 35 }
wfOsiNumDynPtpEsAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Dynamic Point-to-Point ES adjs the osi master gate
receives on."
::= { wfOsi 36 }
wfOsiNumDynPtpIsAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Dynamic Point-to-Point IS adjs the osi master gate
receives on ."
::= { wfOsi 37 }
wfOsiClnpSrcRtOptionDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable processing of Source Route options in CLNP PDUs.
This is required for GOSIP v2 support. GOSIP prohibits processing
Source Routing options. "
DEFVAL { enabled }
::= { wfOsi 38 }
wfOsiNumL1Lsps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of L1 LSPs stored in database."
::= { wfOsi 39 }
wfOsiNumL2Lsps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of L2 LSPs stored in database."
::= { wfOsi 40 }
wfOsiStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all the static routes for this system."
::= { wfOsiGroup 2 }
wfOsiStaticRouteEntry OBJECT-TYPE
SYNTAX WfOsiStaticRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the Static Route Entry for the Static Route Table."
INDEX { wfOsiStaticRouteAddr }
::= { wfOsiStaticRouteTable 1 }
WfOsiStaticRouteEntry ::= SEQUENCE {
wfOsiStaticRouteDelete
INTEGER,
wfOsiStaticRouteDisable
INTEGER,
wfOsiStaticRouteAddr
OCTET STRING,
wfOsiStaticRouteNibbleLength
INTEGER,
wfOsiStaticRouteNextHopIs
OCTET STRING,
wfOsiStaticRouteType
INTEGER,
wfOsiStaticRouteCost
INTEGER
}
wfOsiStaticRouteDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter for Osi Static Route Record."
DEFVAL { created }
::= { wfOsiStaticRouteEntry 1 }
wfOsiStaticRouteDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter for this Static Route."
DEFVAL { enabled }
::= { wfOsiStaticRouteEntry 2 }
wfOsiStaticRouteAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This specifies the address of the static route. It is also
the inst_id."
::= { wfOsiStaticRouteEntry 3 }
wfOsiStaticRouteNibbleLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the length in nibbles of the static route address.
It is necessary to specify it in nibbles since the static route
may be an external address which can be specified in nibbles."
::= { wfOsiStaticRouteEntry 4 }
wfOsiStaticRouteNextHopIs OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the 6-octet ID of the next Hop IS that all
data destined to wfOsiStaticRouteAddr will be forwarded to."
::= { wfOsiStaticRouteEntry 5 }
wfOsiStaticRouteType OBJECT-TYPE
SYNTAX INTEGER {
es(9),
areaaddr(11),
extaddr(13)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This specifies whether the destination is an End System,
an area, or an external Domain."
DEFVAL { es }
::= { wfOsiStaticRouteEntry 6 }
wfOsiStaticRouteCost OBJECT-TYPE
SYNTAX INTEGER(1..1023)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value is the cost to get to this address."
DEFVAL { 20 }
::= { wfOsiStaticRouteEntry 7 }
wfOsiCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This Table contains all circuit configuration info
counters available on a per circuit basis."
::= { wfOsiGroup 3 }
wfOsiCircuitEntry OBJECT-TYPE
SYNTAX WfOsiCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the circuit entry record that appears in the
Circuit Table."
INDEX { wfOsiCircuitId }
::= { wfOsiCircuitTable 1 }
WfOsiCircuitEntry ::= SEQUENCE {
wfOsiCircuitDelete
INTEGER,
wfOsiCircuitDisable
INTEGER,
wfOsiCircuitState
INTEGER,
wfOsiCircuitId
INTEGER,
wfOsiCircuitRouterLevel
INTEGER,
wfOsiCircuitL1DefaultMetric
INTEGER,
wfOsiCircuitL2DefaultMetric
INTEGER,
wfOsiCircuitL1DrPriority
INTEGER,
wfOsiCircuitL2DrPriority
INTEGER,
wfOsiCircuitIsisHelloTimer
INTEGER,
wfOsiCircuitEsisHelloTimer
INTEGER,
wfOsiCircuitEshConfigTime
INTEGER,
wfOsiCircuitPassword
DisplayString,
wfOsiCircuitReceivedPkts
Counter,
wfOsiCircuitSentPkts
Counter,
wfOsiCircuitDroppedPkts
Counter,
wfOsiCircuitFragmentedPdus
Counter,
wfOsiCircuitCongestionDiscards
Counter,
wfOsiCircuitAddrUnreachDiscards
Counter,
wfOsiCircuitAgedPduDiscards
Counter,
wfOsiCircuitPduFormatErrDiscards
Counter,
wfOsiCircuitUnsuppOptsDiscards
Counter,
wfOsiCircuitSentErrorReports
Counter,
wfOsiCircuitReceivedControlPdus
Counter,
wfOsiCircuitSentControlPdus
Counter,
wfOsiCircuitStateChanges
Counter,
wfOsiCircuitAdjStateChanges
Counter,
wfOsiCircuitInitFailures
Counter,
wfOsiCircuitRejectedAdjs
Counter,
wfOsiCircuitReceivedBadLsps
Counter,
wfOsiCircuitReceivedBadSnps
Counter,
wfOsiCircuitReceivedBadEshs
Counter,
wfOsiCircuitReceivedBadL1Iihs
Counter,
wfOsiCircuitReceivedBadL2Iihs
Counter,
wfOsiCircuitL1DrChanges
Counter,
wfOsiCircuitL2DrChanges
Counter,
wfOsiCircuitClnpForwarding
Counter,
wfOsiCircuitClnpDefaultLifeTime
Counter,
wfOsiCircuitClnpInReceives
Counter,
wfOsiCircuitClnpInAddrErrors
Counter,
wfOsiCircuitClnpForwPdus
Counter,
wfOsiCircuitClnpInUnknownNlps
Counter,
wfOsiCircuitClnpInDelivers
Counter,
wfOsiCircuitClnpInUnknownUlps
Counter,
wfOsiCircuitClnpSegCreates
Counter,
wfOsiCircuitClnpInOpts
Counter,
wfOsiCircuitClnpOutOpts
Counter,
wfOsiCircuitEsisEshIns
Counter,
wfOsiCircuitEsisIshOuts
Counter,
wfOsiCircuitEsisRduOuts
Counter,
wfOsiCircuitL1DesignatedRouter
OCTET STRING,
wfOsiCircuitL2DesignatedRouter
OCTET STRING,
wfOsiCircuitClnpOutEchoReplies
Counter,
wfOsiCircuitClnpOutEchoRequests
Counter,
wfOsiCircuitClnpInEchoReplies
Counter,
wfOsiCircuitClnpInEchoRequests
Counter,
wfOsiCircuitNumDynEsAdjs
Counter,
wfOsiCircuitNumDynL1Adjs
Counter,
wfOsiCircuitNumDynL2Adjs
Counter,
wfOsiCircuitNumDynPtpIsAdjs
Counter,
wfOsiCircuitNumDynPtpEsAdjs
Counter,
wfOsiCircuitBadIshReceived
Counter,
wfOsiCircuitEsisIshIns
Counter,
wfOsiCircuitIihHoldMultiplier
INTEGER,
wfOsiCircuitIshHoldMultiplier
INTEGER,
wfOsiCircuitDisableRedirect
INTEGER
}
wfOsiCircuitDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether this circuit is configured."
DEFVAL { created }
::= { wfOsiCircuitEntry 1 }
wfOsiCircuitDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter for this circuit."
DEFVAL { enabled }
::= { wfOsiCircuitEntry 2 }
wfOsiCircuitState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This indicates whether the circuit state is up or down."
DEFVAL { down }
::= { wfOsiCircuitEntry 3 }
wfOsiCircuitId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each known circuit."
::= { wfOsiCircuitEntry 4 }
wfOsiCircuitRouterLevel OBJECT-TYPE
SYNTAX INTEGER {
l1(1),
l2(2),
l1l2(3),
ext(4),
l2ext(6),
l1l2ext(7),
esisonly(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the level protocol that the circuit runs.
Its a bit mask to allow for some combination of
L1, L2, External, ES-IS-only."
DEFVAL { l1l2 }
::= { wfOsiCircuitEntry 5 }
wfOsiCircuitL1DefaultMetric OBJECT-TYPE
SYNTAX INTEGER(1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the default cost of using this circuit for L1 traffic."
DEFVAL { 20 }
::= { wfOsiCircuitEntry 6 }
wfOsiCircuitL2DefaultMetric OBJECT-TYPE
SYNTAX INTEGER(1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the default cost of using this circuit for L2 traffic."
DEFVAL { 20 }
::= { wfOsiCircuitEntry 7 }
wfOsiCircuitL1DrPriority OBJECT-TYPE
SYNTAX INTEGER(1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the priority for this system to become L1 designated
router on this LAN circuit."
DEFVAL { 64 }
::= { wfOsiCircuitEntry 8 }
wfOsiCircuitL2DrPriority OBJECT-TYPE
SYNTAX INTEGER(1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the priority for this system to become L2 designated
router on this LAN circuit."
DEFVAL { 64 }
::= { wfOsiCircuitEntry 9 }
wfOsiCircuitIsisHelloTimer OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the period (secs) between IIH hello transmissions."
DEFVAL { 8 }
::= { wfOsiCircuitEntry 10 }
wfOsiCircuitEsisHelloTimer OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the period (secs) between ISH hello transmissions."
DEFVAL { 30 }
::= { wfOsiCircuitEntry 11 }
wfOsiCircuitEshConfigTime OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the suggested time between ESH transmissions from an
ES went in ISHs (ESCT)."
DEFVAL { 600 }
::= { wfOsiCircuitEntry 12 }
wfOsiCircuitPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is Circuit Password for this circuit. Used to filter
out Hellos from systems without the correct password."
::= { wfOsiCircuitEntry 13 }
wfOsiCircuitReceivedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of pkts that have been received on this
circuit."
::= { wfOsiCircuitEntry 14 }
wfOsiCircuitSentPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of pkts sent out this circuit."
::= { wfOsiCircuitEntry 15 }
wfOsiCircuitDroppedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of pkts dropped on this circuit."
::= { wfOsiCircuitEntry 16 }
wfOsiCircuitFragmentedPdus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of pdus that had to be fragmented
when forwarded out this circuit."
::= { wfOsiCircuitEntry 17 }
wfOsiCircuitCongestionDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of PDUs dropped because of congestion."
::= { wfOsiCircuitEntry 18 }
wfOsiCircuitAddrUnreachDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of PDUs dropped because the destination
is unreachable."
::= { wfOsiCircuitEntry 19 }
wfOsiCircuitAgedPduDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of PDUs dropped because of aging."
::= { wfOsiCircuitEntry 20 }
wfOsiCircuitPduFormatErrDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of PDUs dropped because of Format Error."
::= { wfOsiCircuitEntry 21 }
wfOsiCircuitUnsuppOptsDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of PDUs dropped because they contain
unsupported options."
::= { wfOsiCircuitEntry 22 }
wfOsiCircuitSentErrorReports OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of error reports sent out this circuit."
::= { wfOsiCircuitEntry 23 }
wfOsiCircuitReceivedControlPdus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of ESIS or ISIS PDUs received on this circuit."
::= { wfOsiCircuitEntry 24 }
wfOsiCircuitSentControlPdus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of ESIS or ISIS PDUs sent out this circuit."
::= { wfOsiCircuitEntry 25 }
wfOsiCircuitStateChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of times the circuit goes from down to up
or from up to down."
::= { wfOsiCircuitEntry 26 }
wfOsiCircuitAdjStateChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of times an adjacency off of this circuit
goes from down to up or from up to down state."
::= { wfOsiCircuitEntry 27 }
wfOsiCircuitInitFailures OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of times this circuit fails to initialize."
::= { wfOsiCircuitEntry 28 }
wfOsiCircuitRejectedAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Adjacencies that were rejected on
this circuit."
::= { wfOsiCircuitEntry 29 }
wfOsiCircuitReceivedBadLsps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of bad Lsps received on this circuit."
::= { wfOsiCircuitEntry 30 }
wfOsiCircuitReceivedBadSnps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of BAD Sequence Number Pdus received on
this circuit."
::= { wfOsiCircuitEntry 31 }
wfOsiCircuitReceivedBadEshs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of bad ESHs received on this circuit."
::= { wfOsiCircuitEntry 32 }
wfOsiCircuitReceivedBadL1Iihs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of bad L1 IIHs received on this circuit."
::= { wfOsiCircuitEntry 33 }
wfOsiCircuitReceivedBadL2Iihs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of bad L2 IIHs received on this circuit."
::= { wfOsiCircuitEntry 34 }
wfOsiCircuitL1DrChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of times the L1 Designated Router has been
elected on this circuit."
::= { wfOsiCircuitEntry 35 }
wfOsiCircuitL2DrChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of times the L2 Designated Router has been
elected on this circuit."
::= { wfOsiCircuitEntry 36 }
wfOsiCircuitClnpForwarding OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This shows whether forwarding is enabled over this circuit."
::= { wfOsiCircuitEntry 37 }
wfOsiCircuitClnpDefaultLifeTime OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the lifetime included in clnp pdus generated by this
router (i.e. echo and echo reply pdus, error report pdus)."
::= { wfOsiCircuitEntry 38 }
wfOsiCircuitClnpInReceives OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP pdus received from this circuit."
::= { wfOsiCircuitEntry 39 }
wfOsiCircuitClnpInAddrErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP pdus recived from this circuit
with Address format errors."
::= { wfOsiCircuitEntry 40 }
wfOsiCircuitClnpForwPdus OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Clnp PDUs received on this circuit
that are forwarded."
::= { wfOsiCircuitEntry 41 }
wfOsiCircuitClnpInUnknownNlps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Clnp PDUs received on this circuit
where the network layer addressed is unknown (Bad NLPID)."
::= { wfOsiCircuitEntry 42 }
wfOsiCircuitClnpInDelivers OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Clnp PDUs received on this circuit
whose destination is this router."
::= { wfOsiCircuitEntry 43 }
wfOsiCircuitClnpInUnknownUlps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is number of Clnp PDUs received on this circuit addressed
to this router where the upper layer is unknown."
::= { wfOsiCircuitEntry 44 }
wfOsiCircuitClnpSegCreates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP segments created from
pdus received on this circuit."
::= { wfOsiCircuitEntry 45 }
wfOsiCircuitClnpInOpts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP pdus received with an options
portion."
::= { wfOsiCircuitEntry 46 }
wfOsiCircuitClnpOutOpts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP pdus sent with an options
portion."
::= { wfOsiCircuitEntry 47 }
wfOsiCircuitEsisEshIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of ESHs received from this circuit."
::= { wfOsiCircuitEntry 48 }
wfOsiCircuitEsisIshOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of ISHs sent out this circuit."
::= { wfOsiCircuitEntry 49 }
wfOsiCircuitEsisRduOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Redirects sent out this circuit."
::= { wfOsiCircuitEntry 50 }
wfOsiCircuitL1DesignatedRouter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ID of the L1 Designated Router on this
circuit."
::= { wfOsiCircuitEntry 51 }
wfOsiCircuitL2DesignatedRouter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ID of the L2 Designated Router on this
circuit."
::= { wfOsiCircuitEntry 52 }
wfOsiCircuitClnpOutEchoReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP Echo Replies sent out this circuit."
::= { wfOsiCircuitEntry 53 }
wfOsiCircuitClnpOutEchoRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Clnp Echo Requests sent out this circuit."
::= { wfOsiCircuitEntry 54 }
wfOsiCircuitClnpInEchoReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP Echo Replies received on this circuit."
::= { wfOsiCircuitEntry 55 }
wfOsiCircuitClnpInEchoRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of CLNP Echo Requests recived on this circuit."
::= { wfOsiCircuitEntry 56 }
wfOsiCircuitNumDynEsAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Dynamic End System Adjacencies formed on
this circuit."
::= { wfOsiCircuitEntry 57 }
wfOsiCircuitNumDynL1Adjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Dynamic Level 1 Intermediate System
Adjacencies formed on this circuit. "
::= { wfOsiCircuitEntry 58 }
wfOsiCircuitNumDynL2Adjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Dynamic Level 2 Intermediate System
Adjacencies formed on this circuit."
::= { wfOsiCircuitEntry 59 }
wfOsiCircuitNumDynPtpIsAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Dynamic Intermediate System Point-to-Point
Adjacencies formed on this circuit."
::= { wfOsiCircuitEntry 60 }
wfOsiCircuitNumDynPtpEsAdjs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of Dynamic End System Point-to-Point
Adjaciences formed on this circuit."
::= { wfOsiCircuitEntry 61 }
wfOsiCircuitBadIshReceived OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of bad Intermediate System Hellos
received on this circuit. These will only be received on
Point-to-Point circuits."
::= { wfOsiCircuitEntry 62 }
wfOsiCircuitEsisIshIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the number of good Intermediate System Hellos
received on this circuit. These will only be received on
Point-to-Point circuits."
::= { wfOsiCircuitEntry 63 }
wfOsiCircuitIihHoldMultiplier OBJECT-TYPE
SYNTAX INTEGER(1..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the multiplier value used to compute the hold time
set in the IIH PDUs transmitted from this router. Hold time
equals IIH Timer times IIH Hold Multiplier."
DEFVAL { 3 }
::= { wfOsiCircuitEntry 64 }
wfOsiCircuitIshHoldMultiplier OBJECT-TYPE
SYNTAX INTEGER(1..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the multiplier value used to compute the hold time
set in the ISH PDUs transmitted from this router. Hold time
equals IIH Timer times IIH Hold Multiplier."
DEFVAL { 3 }
::= { wfOsiCircuitEntry 65 }
wfOsiCircuitDisableRedirect OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allow Redirects to be disabled. This is required
when operating over Frame Relay in group mode in a
partial mesh topology."
DEFVAL { enabled }
::= { wfOsiCircuitEntry 66 }
wfOsiExternalAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiExternalAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the table of External Addresses for this Router."
::= { wfOsiGroup 4 }
wfOsiExternalAddressEntry OBJECT-TYPE
SYNTAX WfOsiExternalAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the External Address Record for this Router."
INDEX { wfOsiExtAddrCircuit,
wfOsiExtAddr }
::= { wfOsiExternalAddressTable 1 }
WfOsiExternalAddressEntry ::= SEQUENCE {
wfOsiExtAddrDelete
INTEGER,
wfOsiExtAddrDisable
INTEGER,
wfOsiExtAddr
OCTET STRING,
wfOsiExtAddrCircuit
INTEGER,
wfOsiExtAddrNibbleLength
INTEGER,
wfOsiExtAddrSnpa
OCTET STRING,
wfOsiExtAddrCost
INTEGER
}
wfOsiExtAddrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Create/Delete parameter for this ExtAddr entry."
DEFVAL { created }
::= { wfOsiExternalAddressEntry 1 }
wfOsiExtAddrDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter for this ExtAddr."
DEFVAL { enabled }
::= { wfOsiExternalAddressEntry 2 }
wfOsiExtAddr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the prefix external address. It is also the inst_id."
::= { wfOsiExternalAddressEntry 3 }
wfOsiExtAddrCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the circuit to go out for this adj."
::= { wfOsiExternalAddressEntry 4 }
wfOsiExtAddrNibbleLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the length in nibbles of the external address."
::= { wfOsiExternalAddressEntry 5 }
wfOsiExtAddrSnpa OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the SNPA of the neighbor on this circuit."
::= { wfOsiExternalAddressEntry 6 }
wfOsiExtAddrCost OBJECT-TYPE
SYNTAX INTEGER(1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the external metric cost to this address."
DEFVAL { 20 }
::= { wfOsiExternalAddressEntry 7 }
wfOsiStaticEsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiStaticEsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the Static ES Table for this router."
::= { wfOsiGroup 5 }
wfOsiStaticEsEntry OBJECT-TYPE
SYNTAX WfOsiStaticEsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the Static ES entry for the Static ES Table."
INDEX { wfOsiStaticEsCircuit,
wfOsiStaticEsId }
::= { wfOsiStaticEsTable 1 }
WfOsiStaticEsEntry ::= SEQUENCE {
wfOsiStaticEsDelete
INTEGER,
wfOsiStaticEsDisable
INTEGER,
wfOsiStaticEsId
OCTET STRING,
wfOsiStaticEsCircuit
INTEGER,
wfOsiStaticEsSnpa
OCTET STRING
}
wfOsiStaticEsDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Create/Delete parameter for this Static ES entry."
DEFVAL { created }
::= { wfOsiStaticEsEntry 1 }
wfOsiStaticEsDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter for this Static ES."
DEFVAL { enabled }
::= { wfOsiStaticEsEntry 2 }
wfOsiStaticEsId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ESID of the neighbor."
::= { wfOsiStaticEsEntry 3 }
wfOsiStaticEsCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the circuit to go out for this adj."
::= { wfOsiStaticEsEntry 4 }
wfOsiStaticEsSnpa OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the SNPA of the neighbor on this circuit."
::= { wfOsiStaticEsEntry 5 }
wfOsiTrafficFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiTrafficFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"OSI Traffic Filters"
::= { wfOsiGroup 6 }
wfOsiTrafficFilterEntry OBJECT-TYPE
SYNTAX WfOsiTrafficFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A traffic filter definition"
INDEX { wfOsiTrafficFilterCircuit,
wfOsiTrafficFilterRuleNumber,
wfOsiTrafficFilterFragment }
::= { wfOsiTrafficFilterTable 1 }
WfOsiTrafficFilterEntry ::= SEQUENCE {
wfOsiTrafficFilterDelete
INTEGER,
wfOsiTrafficFilterDisable
INTEGER,
wfOsiTrafficFilterStatus
INTEGER,
wfOsiTrafficFilterCounter
Counter,
wfOsiTrafficFilterDefinition
Opaque,
wfOsiTrafficFilterReserved
INTEGER,
wfOsiTrafficFilterCircuit
INTEGER,
wfOsiTrafficFilterRuleNumber
INTEGER,
wfOsiTrafficFilterFragment
INTEGER,
wfOsiTrafficFilterName
DisplayString
}
wfOsiTrafficFilterDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted."
DEFVAL { created }
::= { wfOsiTrafficFilterEntry 1 }
wfOsiTrafficFilterDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Defines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule."
DEFVAL { enabled }
::= { wfOsiTrafficFilterEntry 2 }
wfOsiTrafficFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
error(2),
inactive(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule."
DEFVAL { inactive }
::= { wfOsiTrafficFilterEntry 3 }
wfOsiTrafficFilterCounter OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of received packets that have
matched this rule."
::= { wfOsiTrafficFilterEntry 4 }
wfOsiTrafficFilterDefinition OBJECT-TYPE
SYNTAX Opaque
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The filter rule definition."
::= { wfOsiTrafficFilterEntry 5 }
wfOsiTrafficFilterReserved OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Reserved field."
::= { wfOsiTrafficFilterEntry 6 }
wfOsiTrafficFilterCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ID of the Circuit to which the
filter is applied."
::= { wfOsiTrafficFilterEntry 7 }
wfOsiTrafficFilterRuleNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"ID for the rule."
::= { wfOsiTrafficFilterEntry 8 }
wfOsiTrafficFilterFragment OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Fragment number - for large rules."
::= { wfOsiTrafficFilterEntry 9 }
wfOsiTrafficFilterName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"name of the rule number"
::= { wfOsiTrafficFilterEntry 10 }
wfOsiL1LspHdrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiL1LspHdrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"2 u_int32's so the inst_id len is 2."
::= { wfOsiGroup 7 }
wfOsiL1LspHdrEntry OBJECT-TYPE
SYNTAX WfOsiL1LspHdrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A Record in the Level 1 Lsp Header Table"
INDEX { wfOsiL1LspHdrLspId }
::= { wfOsiL1LspHdrTable 1 }
WfOsiL1LspHdrEntry ::= SEQUENCE {
wfOsiL1LspHdrLspId
OCTET STRING,
wfOsiL1LspHdrLifetime
INTEGER,
wfOsiL1LspHdrSeqnum
INTEGER,
wfOsiL1LspHdrFlags
OCTET STRING,
wfOsiL1LspHdrCksum
OCTET STRING
}
wfOsiL1LspHdrLspId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LSPID = Source ID + Pseudo-node ID + LSP number"
::= { wfOsiL1LspHdrEntry 1 }
wfOsiL1LspHdrLifetime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lsp Lifetime"
::= { wfOsiL1LspHdrEntry 2 }
wfOsiL1LspHdrSeqnum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lsp sequence number"
::= { wfOsiL1LspHdrEntry 3 }
wfOsiL1LspHdrFlags OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Flags: P/ATT/LSPDBOL/IS type"
::= { wfOsiL1LspHdrEntry 4 }
wfOsiL1LspHdrCksum OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Checksum"
::= { wfOsiL1LspHdrEntry 5 }
wfOsiL2LspHdrTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiL2LspHdrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"2 u_int32's so the inst_id len is 2."
::= { wfOsiGroup 8 }
wfOsiL2LspHdrEntry OBJECT-TYPE
SYNTAX WfOsiL2LspHdrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A Record in the Lsp Header Table"
INDEX { wfOsiL2LspHdrLspId }
::= { wfOsiL2LspHdrTable 1 }
WfOsiL2LspHdrEntry ::= SEQUENCE {
wfOsiL2LspHdrLspId
OCTET STRING,
wfOsiL2LspHdrLifetime
INTEGER,
wfOsiL2LspHdrSeqnum
INTEGER,
wfOsiL2LspHdrFlags
OCTET STRING,
wfOsiL2LspHdrCksum
OCTET STRING
}
wfOsiL2LspHdrLspId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (8))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LSPID = Source ID + Pseudo-node ID + LSP number"
::= { wfOsiL2LspHdrEntry 1 }
wfOsiL2LspHdrLifetime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lsp Lifetime"
::= { wfOsiL2LspHdrEntry 2 }
wfOsiL2LspHdrSeqnum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Lsp sequence number"
::= { wfOsiL2LspHdrEntry 3 }
wfOsiL2LspHdrFlags OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Flags: P/ATT/LSPDBOL/IS type"
::= { wfOsiL2LspHdrEntry 4 }
wfOsiL2LspHdrCksum OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Checksum"
::= { wfOsiL2LspHdrEntry 5 }
wfOsiDynAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiDynAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Dynamic Adjacency Table"
::= { wfOsiGroup 9 }
wfOsiDynAdjEntry OBJECT-TYPE
SYNTAX WfOsiDynAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Adjacency Table - the real index is the adjacency id"
INDEX { wfOsiDynAdjId }
::= { wfOsiDynAdjTable 1 }
WfOsiDynAdjEntry ::= SEQUENCE {
wfOsiDynAdjId
INTEGER,
wfOsiDynAdjDatabase
INTEGER,
wfOsiDynAdjType
INTEGER,
wfOsiDynAdjState
INTEGER,
wfOsiDynAdjCircuitId
INTEGER,
wfOsiDynAdjHoldTime
INTEGER,
wfOsiDynAdjPriority
INTEGER,
wfOsiDynAdjSnpaAddr
OCTET STRING,
wfOsiDynAdjNsapAddr
OCTET STRING,
wfOsiDynAdjLanId
OCTET STRING
}
wfOsiDynAdjId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Index in the Adjacency Table"
::= { wfOsiDynAdjEntry 1 }
wfOsiDynAdjDatabase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Database into which the Adjacency is stored,
1=ES, 2=Level 1 IS, 3=Level 2 IS."
::= { wfOsiDynAdjEntry 2 }
wfOsiDynAdjType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of adjacency. (see Osi_const.h)"
::= { wfOsiDynAdjEntry 3 }
wfOsiDynAdjState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The state of the adjacency. INITIALIZING, UP or FAILED"
::= { wfOsiDynAdjEntry 4 }
wfOsiDynAdjCircuitId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each known circuit."
::= { wfOsiDynAdjEntry 5 }
wfOsiDynAdjHoldTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Hold Time received from neighbor."
::= { wfOsiDynAdjEntry 6 }
wfOsiDynAdjPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Priority to become designated router. IS only."
::= { wfOsiDynAdjEntry 7 }
wfOsiDynAdjSnpaAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SNAP address for neighbor."
::= { wfOsiDynAdjEntry 8 }
wfOsiDynAdjNsapAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Neighbor address (NSAP)."
::= { wfOsiDynAdjEntry 9 }
wfOsiDynAdjLanId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LAN ID from Designated Router. IS only."
::= { wfOsiDynAdjEntry 10 }
wfOsiL1RoutesTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiL1RouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the L1 Routes Table for this router."
::= { wfOsiGroup 10 }
wfOsiL1RouteEntry OBJECT-TYPE
SYNTAX WfOsiL1RouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the L1 Route entry for the Routes Table."
INDEX { wfOsiL1RouteType,
wfOsiL1RoutePathSplit,
wfOsiL1RouteId }
::= { wfOsiL1RoutesTable 1 }
WfOsiL1RouteEntry ::= SEQUENCE {
wfOsiL1RouteId
OCTET STRING,
wfOsiL1RoutePathSplit
INTEGER,
wfOsiL1RouteType
INTEGER,
wfOsiL1RouteNextHopSnpa
OCTET STRING,
wfOsiL1RouteNextHopId
OCTET STRING,
wfOsiL1RouteNextHopType
INTEGER,
wfOsiL1RouteNextHopCircuit
INTEGER,
wfOsiL1RouteDefaultMetricCost
INTEGER
}
wfOsiL1RouteId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the SysID of the L1 Destination."
::= { wfOsiL1RouteEntry 1 }
wfOsiL1RoutePathSplit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This assigns a number to each equal cost path to the
destination. There can be up to 2 equal cost paths
to a destination."
::= { wfOsiL1RouteEntry 2 }
wfOsiL1RouteType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This tells what kind of a route this entry is."
::= { wfOsiL1RouteEntry 3 }
wfOsiL1RouteNextHopSnpa OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the SNPA of the next hop adj for this route."
::= { wfOsiL1RouteEntry 4 }
wfOsiL1RouteNextHopId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ID of the next hop adjacency to this route.
If its just an ES then it is the 6byte System ID.
If the next HOP is an IS then it is the NET. "
::= { wfOsiL1RouteEntry 5 }
wfOsiL1RouteNextHopType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the adj type of the next hop for this route."
::= { wfOsiL1RouteEntry 6 }
wfOsiL1RouteNextHopCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the circuit to forward out for this route."
::= { wfOsiL1RouteEntry 7 }
wfOsiL1RouteDefaultMetricCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the cost to from this system to this destination."
::= { wfOsiL1RouteEntry 8 }
wfOsiL2RoutesTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiL2RouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the L2 Routes Table for this router."
::= { wfOsiGroup 11 }
wfOsiL2RouteEntry OBJECT-TYPE
SYNTAX WfOsiL2RouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the L2 Route entry for the Routes Table."
INDEX { wfOsiL2RouteType,
wfOsiL2RoutePathSplit,
wfOsiL2RouteId }
::= { wfOsiL2RoutesTable 1 }
WfOsiL2RouteEntry ::= SEQUENCE {
wfOsiL2RouteId
OCTET STRING,
wfOsiL2RoutePathSplit
INTEGER,
wfOsiL2RouteType
INTEGER,
wfOsiL2RouteNextHopSnpa
OCTET STRING,
wfOsiL2RouteNextHopId
OCTET STRING,
wfOsiL2RouteNextHopType
INTEGER,
wfOsiL2RouteNextHopCircuit
INTEGER,
wfOsiL2RouteDefaultMetricCost
INTEGER
}
wfOsiL2RouteId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (13))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the SysID of the L2 Destination."
::= { wfOsiL2RouteEntry 1 }
wfOsiL2RoutePathSplit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This assigns a number to each equal cost path to the
destination. There can be up to 2 equal cost paths
to a destination."
::= { wfOsiL2RouteEntry 2 }
wfOsiL2RouteType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This tells what kind of a route this entry is."
::= { wfOsiL2RouteEntry 3 }
wfOsiL2RouteNextHopSnpa OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the SNPA of the neighbor on this circuit."
::= { wfOsiL2RouteEntry 4 }
wfOsiL2RouteNextHopId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the ID of the next hop adjacency to this route.
If its just an ES then it is the 6byte System ID.
If the next HOP is an IS then it is the NET. "
::= { wfOsiL2RouteEntry 5 }
wfOsiL2RouteNextHopType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the adj type of the next hop for this route."
::= { wfOsiL2RouteEntry 6 }
wfOsiL2RouteNextHopCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the circuit to go out for this adj."
::= { wfOsiL2RouteEntry 7 }
wfOsiL2RouteDefaultMetricCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the cost to from this system to this destination."
::= { wfOsiL2RouteEntry 8 }
wfOsiDecnetTrans OBJECT IDENTIFIER ::= { wfOsiGroup 12 }
wfOsiDecnetTransDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether DECnet Phase 4 to Phase 5
Transition functions are configured."
DEFVAL { created }
::= { wfOsiDecnetTrans 1 }
wfOsiDecnetTransDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether DECnet Phase 4 to Phase 5
Transition functions are enabled."
DEFVAL { enabled }
::= { wfOsiDecnetTrans 2 }
wfOsiDecnetTransState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value displays the state of the DECnet Phase 4 to Phase 5
Transition function."
DEFVAL { notpresent }
::= { wfOsiDecnetTrans 3 }
wfOsiDecnetTransPhase4Pkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of successfully translated Phase 4 packets"
::= { wfOsiDecnetTrans 4 }
wfOsiDecnetTransSegFail OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times Phase 5 translation failed because the packet
was segmented."
::= { wfOsiDecnetTrans 5 }
wfOsiDecnetTransNselFail OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times Phase 5 translation failed because the NSELs
were not the same."
::= { wfOsiDecnetTrans 6 }
wfOsiDecnetTransUnrFail OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of times Phase 5 failed to find a route to the
destination."
::= { wfOsiDecnetTrans 7 }
wfOsiDecnetTransNumPhase4Es OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Phase 4 ES Adjacencies announced by the Phase 4
(DECnet IV) router."
::= { wfOsiDecnetTrans 8 }
wfOsiAreaAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiAreaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the table of Area Addresses for this Router."
::= { wfOsiGroup 13 }
wfOsiAreaAddressEntry OBJECT-TYPE
SYNTAX WfOsiAreaAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the Area Address Record for this Router."
INDEX { wfOsiAreaAddress }
::= { wfOsiAreaAddressTable 1 }
WfOsiAreaAddressEntry ::= SEQUENCE {
wfOsiAreaAddrDelete
INTEGER,
wfOsiAreaAddrDisable
INTEGER,
wfOsiAreaAddress
OCTET STRING
}
wfOsiAreaAddrDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the Create/Delete parameter for this AreaAddr entry."
DEFVAL { created }
::= { wfOsiAreaAddressEntry 1 }
wfOsiAreaAddrDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter for this AreaAddr."
DEFVAL { enabled }
::= { wfOsiAreaAddressEntry 2 }
wfOsiAreaAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the prefix area address. It is also the inst_id."
::= { wfOsiAreaAddressEntry 3 }
wfOsiTarpEntry OBJECT IDENTIFIER ::= { wfOsiGroup 14 }
wfOsiTarpCreate OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether OSI Tarp is configured on this slot."
DEFVAL { created }
::= { wfOsiTarpEntry 1 }
wfOsiTarpEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value dtermines if OSI Tarp is to startup."
DEFVAL { enabled }
::= { wfOsiTarpEntry 2 }
wfOsiTarpState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value describes the state of OSI Tarp."
DEFVAL { notpresent }
::= { wfOsiTarpEntry 3 }
wfOsiTarpTID OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value contains the Target Identifier
assigned to the router (Network Entity)."
::= { wfOsiTarpEntry 4 }
wfOsiTarpOriginate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if TARP is allowed
to originate any tarp requests."
DEFVAL { enabled }
::= { wfOsiTarpEntry 5 }
wfOsiTarpLifetime OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines what the lifetime of
of TARP packets originated by this router
will be."
DEFVAL { 25 }
::= { wfOsiTarpEntry 6 }
wfOsiTarpStartSeq OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines what the starting
sequence number of TARP packets originated
by this router will be."
DEFVAL { 1 }
::= { wfOsiTarpEntry 7 }
wfOsiTarpNextSeq OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value determines what the next sequence
number of TARP packets originated by this
router will be."
::= { wfOsiTarpEntry 8 }
wfOsiTarpTarPro OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value describes what the Protocol Address
Type field within the TARP packet must be.
A value of 'FE' describes a CLNP address type."
::= { wfOsiTarpEntry 9 }
wfOsiTarpTDC OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether or not TARP
uses and maintains a Tarp Data Cache."
DEFVAL { enabled }
::= { wfOsiTarpEntry 10 }
wfOsiTarpL2TDC OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines whether or not TARP
uses and maintains a Level 2 Tarp Data Cache."
DEFVAL { enabled }
::= { wfOsiTarpEntry 11 }
wfOsiTarpT1 OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value configures the Tarp T1 Timer - how
many seconds to wait for a response to a Type1
Request PDU."
DEFVAL { 15 }
::= { wfOsiTarpEntry 12 }
wfOsiTarpT2 OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value configures the Tarp T2 Timer - how
many seconds to wait for a response to a Type2
Request PDU."
DEFVAL { 25 }
::= { wfOsiTarpEntry 13 }
wfOsiTarpT3 OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value configures the Tarp T3 Timer - how
many seconds to wait for a response to a Type5
Request PDU."
DEFVAL { 40 }
::= { wfOsiTarpEntry 14 }
wfOsiTarpT4 OBJECT-TYPE
SYNTAX INTEGER(1..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value configures the Tarp T4 Timer, which
is used during the Error Recovery process after
T2 expires."
DEFVAL { 20 }
::= { wfOsiTarpEntry 15 }
wfOsiTarpLDBTimer OBJECT-TYPE
SYNTAX INTEGER(1..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value configures the Loop Detection Buffer's
Entry Timer."
DEFVAL { 300 }
::= { wfOsiTarpEntry 16 }
wfOsiTarpLDBFlush OBJECT-TYPE
SYNTAX INTEGER(1..86400)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value configures the timer that signals the
flushing of the Loop Detection Buffer."
DEFVAL { 300 }
::= { wfOsiTarpEntry 17 }
wfOsiTarpLDBSize OBJECT-TYPE
SYNTAX INTEGER(1..5000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value specifies the maximum number of entries
the the Loop Detection Buffer can hold."
DEFVAL { 50 }
::= { wfOsiTarpEntry 18 }
wfOsiTarpType1Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 1 Tarp packets
received by this interface."
::= { wfOsiTarpEntry 19 }
wfOsiTarpType1Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 1 Tarp packets
transmitted by this interface."
::= { wfOsiTarpEntry 20 }
wfOsiTarpType2Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 2 Tarp packets
received by this interface."
::= { wfOsiTarpEntry 21 }
wfOsiTarpType2Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 2 Tarp packets
transmitted by this interface."
::= { wfOsiTarpEntry 22 }
wfOsiTarpType3Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 3 Tarp packets
received by this interface."
::= { wfOsiTarpEntry 23 }
wfOsiTarpType3Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 3 Tarp packets
transmitted by this interface."
::= { wfOsiTarpEntry 24 }
wfOsiTarpType4Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 4 Tarp packets
received by this interface."
::= { wfOsiTarpEntry 25 }
wfOsiTarpType4Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 4 Tarp packets
transmitted by this interface."
::= { wfOsiTarpEntry 26 }
wfOsiTarpType5Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 5 Tarp packets
received by this interface."
::= { wfOsiTarpEntry 27 }
wfOsiTarpType5Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 5 Tarp packets
transmitted by this interface."
::= { wfOsiTarpEntry 28 }
wfOsiTarpCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiTarpCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all of the Tarp interfaces for
this system."
::= { wfOsiGroup 15 }
wfOsiTarpCircuitEntry OBJECT-TYPE
SYNTAX WfOsiTarpCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the Tarp Interface Entry for the Tarp Interface
Table."
INDEX { wfOsiTarpCircuitCct }
::= { wfOsiTarpCircuitTable 1 }
WfOsiTarpCircuitEntry ::= SEQUENCE {
wfOsiTarpCircuitCreate
INTEGER,
wfOsiTarpCircuitEnable
INTEGER,
wfOsiTarpCircuitState
INTEGER,
wfOsiTarpCircuitCct
INTEGER,
wfOsiTarpCircuitPropagate
INTEGER,
wfOsiTarpCircuitOriginate
INTEGER,
wfOsiTarpCircuitType1Rcv
Counter,
wfOsiTarpCircuitType1Xmt
Counter,
wfOsiTarpCircuitType2Rcv
Counter,
wfOsiTarpCircuitType2Xmt
Counter,
wfOsiTarpCircuitType3Rcv
Counter,
wfOsiTarpCircuitType3Xmt
Counter,
wfOsiTarpCircuitType4Rcv
Counter,
wfOsiTarpCircuitType4Xmt
Counter,
wfOsiTarpCircuitType5Rcv
Counter,
wfOsiTarpCircuitType5Xmt
Counter,
wfOsiTarpCircuitNoBufs
Counter
}
wfOsiTarpCircuitCreate OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if the Tarp Interface is to be created
for this OSI interface."
DEFVAL { created }
::= { wfOsiTarpCircuitEntry 1 }
wfOsiTarpCircuitEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if the Tarp Interface is to be
enabled for this OSI interface."
DEFVAL { enabled }
::= { wfOsiTarpCircuitEntry 2 }
wfOsiTarpCircuitState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value reflects the state of the Tarp interface."
DEFVAL { notpresent }
::= { wfOsiTarpCircuitEntry 3 }
wfOsiTarpCircuitCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Circuit number for this Tarp Interface."
::= { wfOsiTarpCircuitEntry 4 }
wfOsiTarpCircuitPropagate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if this interface will propagate
transit Tarp packets out this interface."
DEFVAL { enabled }
::= { wfOsiTarpCircuitEntry 5 }
wfOsiTarpCircuitOriginate OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if this interface will send out
Tarp packets originated by the router."
DEFVAL { enabled }
::= { wfOsiTarpCircuitEntry 6 }
wfOsiTarpCircuitType1Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 1 Tarp packets
received by this interface."
::= { wfOsiTarpCircuitEntry 7 }
wfOsiTarpCircuitType1Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 1 Tarp packets
transmitted by this interface."
::= { wfOsiTarpCircuitEntry 8 }
wfOsiTarpCircuitType2Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 2 Tarp packets
received by this interface."
::= { wfOsiTarpCircuitEntry 9 }
wfOsiTarpCircuitType2Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 2 Tarp packets
transmitted by this interface."
::= { wfOsiTarpCircuitEntry 10 }
wfOsiTarpCircuitType3Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 3 Tarp packets
received by this interface."
::= { wfOsiTarpCircuitEntry 11 }
wfOsiTarpCircuitType3Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 3 Tarp packets
transmitted by this interface."
::= { wfOsiTarpCircuitEntry 12 }
wfOsiTarpCircuitType4Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 4 Tarp packets
received by this interface."
::= { wfOsiTarpCircuitEntry 13 }
wfOsiTarpCircuitType4Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 4 Tarp packets
transmitted by this interface."
::= { wfOsiTarpCircuitEntry 14 }
wfOsiTarpCircuitType5Rcv OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 5 Tarp packets
received by this interface."
::= { wfOsiTarpCircuitEntry 15 }
wfOsiTarpCircuitType5Xmt OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value counts the number of Type 5 Tarp packets
transmitted by this interface."
::= { wfOsiTarpCircuitEntry 16 }
wfOsiTarpCircuitNoBufs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value represents the number of times Tarp tried
to allocate a buffer but was unable."
::= { wfOsiTarpCircuitEntry 17 }
wfOsiTarpLDBTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiTarpLDBEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of wfOsiTarpLDBEntry's."
::= { wfOsiGroup 16 }
wfOsiTarpLDBEntry OBJECT-TYPE
SYNTAX WfOsiTarpLDBEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in the Loop Detection Buffer."
INDEX { wfOsiTarpLDBNSAP }
::= { wfOsiTarpLDBTable 1 }
WfOsiTarpLDBEntry ::= SEQUENCE {
wfOsiTarpLDBCreate
INTEGER,
wfOsiTarpLDBNSAP
OCTET STRING,
wfOsiTarpLDBSequence
INTEGER,
wfOsiTarpLDBCurrentTimer
INTEGER
}
wfOsiTarpLDBCreate OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the creation or deletion of the instance."
::= { wfOsiTarpLDBEntry 1 }
wfOsiTarpLDBNSAP OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The NSAP address for this entry."
::= { wfOsiTarpLDBEntry 2 }
wfOsiTarpLDBSequence OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The sequence number for this LDB entry."
::= { wfOsiTarpLDBEntry 3 }
wfOsiTarpLDBCurrentTimer OBJECT-TYPE
SYNTAX INTEGER(1..600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Current timer for this LDB Entry."
DEFVAL { 300 }
::= { wfOsiTarpLDBEntry 4 }
wfOsiTarpStaticAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiTarpStaticAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table of wfOsiTarpStaticAdjEntry's."
::= { wfOsiGroup 17 }
wfOsiTarpStaticAdjEntry OBJECT-TYPE
SYNTAX WfOsiTarpStaticAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the static adjacency record that appears
in the adjacency table."
INDEX { wfOsiTarpStaticAdjNSAP }
::= { wfOsiTarpStaticAdjTable 1 }
WfOsiTarpStaticAdjEntry ::= SEQUENCE {
wfOsiTarpStaticAdjCreate
INTEGER,
wfOsiTarpStaticAdjEnable
INTEGER,
wfOsiTarpStaticAdjNSAP
OCTET STRING,
wfOsiTarpStaticNibbleLength
INTEGER
}
wfOsiTarpStaticAdjCreate OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if this instance should be
created or deleted."
DEFVAL { created }
::= { wfOsiTarpStaticAdjEntry 1 }
wfOsiTarpStaticAdjEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if the Static Adjacency should
be enabled."
DEFVAL { enabled }
::= { wfOsiTarpStaticAdjEntry 2 }
wfOsiTarpStaticAdjNSAP OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This specifies the address of the Static Adjacency. It
is also the instance ID."
::= { wfOsiTarpStaticAdjEntry 3 }
wfOsiTarpStaticNibbleLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Describes the number of nibbles in the Static NSAP
Address."
::= { wfOsiTarpStaticAdjEntry 4 }
wfOsiTarpIgnoreAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfOsiTarpIgnoreAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all the adjacency entries that
should be ignored."
::= { wfOsiGroup 18 }
wfOsiTarpIgnoreAdjEntry OBJECT-TYPE
SYNTAX WfOsiTarpIgnoreAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the ignore static route entry for the
wfOsiTarpIgnoreAdj table."
INDEX { wfOsiTarpIgnoreAdjNSAP }
::= { wfOsiTarpIgnoreAdjTable 1 }
WfOsiTarpIgnoreAdjEntry ::= SEQUENCE {
wfOsiTarpIgnoreAdjCreate
INTEGER,
wfOsiTarpIgnoreAdjEnable
INTEGER,
wfOsiTarpIgnoreAdjNSAP
OCTET STRING,
wfOsiTarpIgnoreNibbleLength
INTEGER
}
wfOsiTarpIgnoreAdjCreate OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Signifies this instance should be created."
DEFVAL { created }
::= { wfOsiTarpIgnoreAdjEntry 1 }
wfOsiTarpIgnoreAdjEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This value determines if this instance should be enabled
or disabled."
DEFVAL { enabled }
::= { wfOsiTarpIgnoreAdjEntry 2 }
wfOsiTarpIgnoreAdjNSAP OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (20))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the OSI Adjacency that should be ignored."
::= { wfOsiTarpIgnoreAdjEntry 3 }
wfOsiTarpIgnoreNibbleLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Describes the number of nibbles in the Static NSAP
Address for the Ignore Static Route."
::= { wfOsiTarpIgnoreAdjEntry 4 }
END