Wellfleet-PPP-MIB DEFINITIONS ::= BEGIN
IMPORTS
IpAddress, Counter, Gauge
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB
wfPppGroup
FROM Wellfleet-COMMON-MIB;
wfPppLineTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfPppLineEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Wellfleet PPP Line Configuration Table containing
attributes dealing with the link layer and the Link Control
Protocol (LCP)"
::= { wfPppGroup 1 }
wfPppLineEntry OBJECT-TYPE
SYNTAX WfPppLineEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per Wellfleet PPP line configuration parameters
and counters"
INDEX { wfPppLineLineNumber,
wfPppLineLLIndex }
::= { wfPppLineTable 1 }
WfPppLineEntry ::= SEQUENCE {
wfPppLineDelete
INTEGER,
wfPppLineDisable
INTEGER,
wfPppLineState
INTEGER,
wfPppLineLineNumber
INTEGER,
wfPppLineLLIndex
INTEGER,
wfPppLineLcpCurrentState
INTEGER,
wfPppLineRestartTimer
INTEGER,
wfPppLineEchoRequestFreq
INTEGER,
wfPppLineEchoReplyLoss
INTEGER,
wfPppLineMaxConfReq
INTEGER,
wfPppLineMaxTermReq
INTEGER,
wfPppLineMaxConfFail
INTEGER,
wfPppLineMagicNumber
Counter,
wfPppLineMru
INTEGER,
wfPppLineLocalAuthProtocol
INTEGER,
wfPppLineRemoteAuthProtocol
INTEGER,
wfPppLineLocalPapId
DisplayString,
wfPppLineLocalPapPassword
DisplayString,
wfPppLineRemotePapId
DisplayString,
wfPppLineRemotePapPassword
DisplayString,
wfPppLineLQProtocol
INTEGER,
wfPppLineDisableRemoteLQRTimer
INTEGER,
wfPppLineCfgLQRRptPrd
INTEGER,
wfPppLineLQRRptPrd
INTEGER,
wfPppLineCfgInboundQuality
INTEGER,
wfPppLineInboundQuality
INTEGER,
wfPppLineCfgOutboundQuality
INTEGER,
wfPppLineOutboundQuality
INTEGER,
wfPppLineOutLQRs
Counter,
wfPppLineInLQRs
Counter,
wfPppLineChapSecret
DisplayString,
wfPppLinePapFallbackDisable
INTEGER,
wfPppLineChapLocalName
DisplayString,
wfPppLineChapRemoteName
DisplayString,
wfPppLineChapPeriodicTimer
INTEGER,
wfPppLineBadPackets
Counter,
wfPppLineLastBadPacket
OCTET STRING,
wfPppLineLevelPktsIn
Counter,
wfPppLineAllowPapReject
INTEGER,
wfPppLineActiveCct
INTEGER,
wfPppLineCfgAsyncMap
Gauge,
wfPppLineActualAsyncMap
Gauge,
wfPppLineAuthTimer
INTEGER,
wfPppLineConvergenceTimer
INTEGER,
wfPppLineMagicNumDisable
INTEGER,
wfPppLineMyLinkDiscr
INTEGER,
wfPppLinePeerLinkDiscr
INTEGER,
wfPppLineCfgMru
INTEGER,
wfPppLineRfc1661Compliance
INTEGER,
wfPppLineLqmCurrentState
INTEGER
}
wfPppLineDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter"
DEFVAL { created }
::= { wfPppLineEntry 1 }
wfPppLineDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter -- Generates
Open/Close events to the LCP FSM"
DEFVAL { enabled }
::= { wfPppLineEntry 2 }
wfPppLineState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
loopedback(4),
notpresent(20)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PPP state variable, Not Present, Init, Down, Up"
DEFVAL { notpresent }
::= { wfPppLineEntry 3 }
wfPppLineLineNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier. This is the line number assigned
to the driver PPP is running on top of"
::= { wfPppLineEntry 4 }
wfPppLineLLIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Instance identifier. This is the lower layer index
presented to PPP by the layer immediately below it
on the protocol stack. If the lower layer is a driver,
the index will be 0."
::= { wfPppLineEntry 5 }
wfPppLineLcpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the LCP Finite State Machine"
::= { wfPppLineEntry 6 }
wfPppLineRestartTimer OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for Restart timer in seconds"
DEFVAL { 3 }
::= { wfPppLineEntry 7 }
wfPppLineEchoRequestFreq OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for Echo-Request frequency - number of seconds
between transmission of Echo-Request packets"
::= { wfPppLineEntry 8 }
wfPppLineEchoReplyLoss OBJECT-TYPE
SYNTAX INTEGER(1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for Echo-Reply acceptable loss - number of
unacknowledged Echo-Reply packets counted before
declaring the link down"
DEFVAL { 3 }
::= { wfPppLineEntry 9 }
wfPppLineMaxConfReq OBJECT-TYPE
SYNTAX INTEGER(0..100000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for maximum Configure-Requests - number of
Configure-Request packets sent without receiving a
valid Configure-Ack, Configure-Nak or Configure-Reject
before assuming peer is unable to respond"
DEFVAL { 10 }
::= { wfPppLineEntry 10 }
wfPppLineMaxTermReq OBJECT-TYPE
SYNTAX INTEGER(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for maximum Terminate-Requests - number of
Terminate-Request packets sent without receiving a
Terminate-Ack before assuming peer is unable to respond"
DEFVAL { 2 }
::= { wfPppLineEntry 11 }
wfPppLineMaxConfFail OBJECT-TYPE
SYNTAX INTEGER(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for maximum configuration failure count - number of
Configure-Nak packets sent without sending a
Configure-Ack before assuming configuration is unable to
converge"
DEFVAL { 10 }
::= { wfPppLineEntry 12 }
wfPppLineMagicNumber OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the Magic Number being used on this line"
::= { wfPppLineEntry 13 }
wfPppLineMru OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this is the MRU being used on the line (in both
directions)"
::= { wfPppLineEntry 14 }
wfPppLineLocalAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
passauth(49187),
chap(49699),
none(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this is the authorization protocol we require our peer
to use on our side of the link"
DEFVAL { none }
::= { wfPppLineEntry 15 }
wfPppLineRemoteAuthProtocol OBJECT-TYPE
SYNTAX INTEGER {
passauth(49187),
none(1)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this is the authorization protocol our peer requires us
to use on its side of the link"
DEFVAL { none }
::= { wfPppLineEntry 16 }
wfPppLineLocalPapId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"our PAP id - our peer sends this to us in an
Authenticate-Request message"
::= { wfPppLineEntry 17 }
wfPppLineLocalPapPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"our PAP password - our peer sends this to us in an
Authenticate-Request message"
::= { wfPppLineEntry 18 }
wfPppLineRemotePapId OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"our peer's PAP id - we send this to our
peer in an Authenticate-Request message"
::= { wfPppLineEntry 19 }
wfPppLineRemotePapPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"our peer's PAP password - we send this to our
peer in an Authenticate-Request message"
::= { wfPppLineEntry 20 }
wfPppLineLQProtocol OBJECT-TYPE
SYNTAX INTEGER {
linkqr(49189),
none(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the Link Quality protocol we want to use"
DEFVAL { none }
::= { wfPppLineEntry 21 }
wfPppLineDisableRemoteLQRTimer OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable our peer's LQR timer - this allows
for one side to maintain the timer while the
other just responds to LQR packets"
DEFVAL { enabled }
::= { wfPppLineEntry 22 }
wfPppLineCfgLQRRptPrd OBJECT-TYPE
SYNTAX INTEGER(1..120)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this is the value in seconds between transmission
of LQR packets (Reporting-Period) - it will be the
same on both sides"
DEFVAL { 3 }
::= { wfPppLineEntry 23 }
wfPppLineLQRRptPrd OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this is the Reporting-Period, in seconds, agreed upon
during negotiation - we allow the peer to negotiate
down from our configured period, our maximum, but not
below 1 second"
::= { wfPppLineEntry 24 }
wfPppLineCfgInboundQuality OBJECT-TYPE
SYNTAX INTEGER(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the percentage of packets sent by our peer that
we've successfully received (over the last 5 LQR
Reporting-Periods) - 100 indicates we won't tolerate
any loss"
DEFVAL { 90 }
::= { wfPppLineEntry 25 }
wfPppLineInboundQuality OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current inbound quality"
::= { wfPppLineEntry 26 }
wfPppLineCfgOutboundQuality OBJECT-TYPE
SYNTAX INTEGER(0..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the percentage of packets sent by us that our
peer successfully received (over the last 5 LQR
Reporting-Periods) - 100 indicates we won't tolerate
any loss"
DEFVAL { 90 }
::= { wfPppLineEntry 27 }
wfPppLineOutboundQuality OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current inbound quality"
::= { wfPppLineEntry 28 }
wfPppLineOutLQRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the number of Link-Quality-Report packets we've
transmitted"
::= { wfPppLineEntry 29 }
wfPppLineInLQRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the number of Link-Quality-Report packets we've
received"
::= { wfPppLineEntry 30 }
wfPppLineChapSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this CHAP secret MUST be the same on both sides of
the link if CHAP is used as the Authentication
protocol"
::= { wfPppLineEntry 31 }
wfPppLinePapFallbackDisable OBJECT-TYPE
SYNTAX INTEGER {
disabled(2),
enabled(1)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"if an attempt to negotiate CHAP fails, enabling this
allows a fallback to PAP"
DEFVAL { disabled }
::= { wfPppLineEntry 32 }
wfPppLineChapLocalName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute is used to assign a local CHAP Name
which is used to inform our peer of our identity,
during WHOAMI processing"
::= { wfPppLineEntry 33 }
wfPppLineChapRemoteName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is used to store our peer's CHAP Name
which is used to learn our peer's identity,
during WHOAMI processing"
::= { wfPppLineEntry 34 }
wfPppLineChapPeriodicTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Timer for periodic CHAP in seconds. A time of
0 disables Periodic CHAP. This timer value should
long enough to allow CHAP to complete one phase
before entering another."
::= { wfPppLineEntry 35 }
wfPppLineBadPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"These are packets not in correct PPP format"
::= { wfPppLineEntry 36 }
wfPppLineLastBadPacket OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the first 16 bytes of the last bad packet
we received"
::= { wfPppLineEntry 37 }
wfPppLineLevelPktsIn OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the count of PPP link-level packets
(such as Link Control Protocol or Compression
Control Protocl) which have been received."
::= { wfPppLineEntry 38 }
wfPppLineAllowPapReject OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"There are some peers that don't want us asking to
be a PAP authenticator, so accept the Reject and
remove PAP from the LCP Configure-Request if this
is enabled."
DEFVAL { disabled }
::= { wfPppLineEntry 39 }
wfPppLineActiveCct OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the circuit number that this PPP line belongs to
For the any switched lines, this will initially be -1 "
DEFVAL {65535}
::= { wfPppLineEntry 40 }
wfPppLineCfgAsyncMap OBJECT-TYPE
SYNTAX Gauge
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the initial seed value of
Async-Control-Character-Map which will be used
for LCP negotiations with the peer."
DEFVAL { 655360 }
::= { wfPppLineEntry 41 }
wfPppLineActualAsyncMap OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Async-Control-Character-Map used by the link to
escape control characters in the data packet. This
is the result of LCP negotiations with the peer."
::= { wfPppLineEntry 42 }
wfPppLineAuthTimer OBJECT-TYPE
SYNTAX INTEGER(1..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for Authentication timer in seconds"
DEFVAL { 10 }
::= { wfPppLineEntry 43 }
wfPppLineConvergenceTimer OBJECT-TYPE
SYNTAX INTEGER(1..5000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value for Convergence timer in seconds"
DEFVAL { 300 }
::= { wfPppLineEntry 44 }
wfPppLineMagicNumDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "Allows Magic Numbers to be disabled on this interface."
DEFVAL { enabled }
::= { wfPppLineEntry 45 }
wfPppLineMyLinkDiscr OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value of Link Discriminator of this endpoint"
::= { wfPppLineEntry 46 }
wfPppLinePeerLinkDiscr OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"value of Link Discriminator of peer's endpoint"
::= { wfPppLineEntry 47 }
wfPppLineCfgMru OBJECT-TYPE
SYNTAX INTEGER(1..4600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this is the Configured MRU being used on the line"
DEFVAL { 1500 }
::= { wfPppLineEntry 48 }
wfPppLineRfc1661Compliance OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter for RFC 1661 compliance"
DEFVAL { disabled }
::= { wfPppLineEntry 49 }
wfPppLineLqmCurrentState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether LQM is running on the line."
DEFVAL { down }
::= { wfPppLineEntry 50 }
wfPppCircuitTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfPppCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Wellfleet PPP Circuit Configuration Table containing
attributes dealing with the network layer and each
Network Control Protocol (NCP)"
::= { wfPppGroup 2 }
wfPppCircuitEntry OBJECT-TYPE
SYNTAX WfPppCircuitEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per Wellfleet circuit PPP configuration parameters and
counters"
INDEX { wfPppCircuitID }
::= { wfPppCircuitTable 1 }
WfPppCircuitEntry ::= SEQUENCE {
wfPppCircuitDelete
INTEGER,
wfPppCircuitState
INTEGER,
wfPppCircuitIpcpCurrentState
INTEGER,
wfPppCircuitOsinlcpCurrentState
INTEGER,
wfPppCircuitXnscpCurrentState
INTEGER,
wfPppCircuitDncpCurrentState
INTEGER,
wfPppCircuitAtcpCurrentState
INTEGER,
wfPppCircuitIpxcpCurrentState
INTEGER,
wfPppCircuitBncpCurrentState
INTEGER,
wfPppCircuitVncpCurrentState
INTEGER,
wfPppCircuitID
INTEGER,
wfPppCircuitIpDisable
INTEGER,
wfPppCircuitOsinlDisable
INTEGER,
wfPppCircuitXnsDisable
INTEGER,
wfPppCircuitDecnetDisable
INTEGER,
wfPppCircuitAppletalkDisable
INTEGER,
wfPppCircuitIpxDisable
INTEGER,
wfPppCircuitBridgeDisable
INTEGER,
wfPppCircuitVinesDisable
INTEGER,
wfPppCircuitCfgLocalIpAddr
IpAddress,
wfPppCircuitLocalIpAddr
IpAddress,
wfPppCircuitCfgRemoteIpAddr
IpAddress,
wfPppCircuitRemoteIpAddr
IpAddress,
wfPppCircuitCfgIpxNetworkNumber
OCTET STRING,
wfPppCircuitIpxNetworkNumber
OCTET STRING,
wfPppCircuitIpxRemoteNodeNumber
OCTET STRING,
wfPppCircuitCfgIpxRoutingProtocol
INTEGER,
wfPppCircuitIpxRoutingProtocol
INTEGER,
wfPppCircuitLocalIpxRouterName
DisplayString,
wfPppCircuitRemoteIpxRouterName
DisplayString,
wfPppCircuitIpxConfigComplete
INTEGER,
wfPppCircuitCfgAtNetwork
INTEGER,
wfPppCircuitAtNetwork
INTEGER,
wfPppCircuitCfgLocalAtNode
INTEGER,
wfPppCircuitLocalAtNode
INTEGER,
wfPppCircuitCfgRemoteAtNode
INTEGER,
wfPppCircuitRemoteAtNode
INTEGER,
wfPppCircuitCfgAtRoutingProtocol
INTEGER,
wfPppCircuitAtRoutingProtocol
INTEGER,
wfPppCircuitCfgBridgeEnet
INTEGER,
wfPppCircuitBridgeEnet
INTEGER,
wfPppCircuitCfgBridgeFddi
INTEGER,
wfPppCircuitBridgeFddi
INTEGER,
wfPppCircuitCfgBridgeTokenRing
INTEGER,
wfPppCircuitBridgeTokenRing
INTEGER,
wfPppCircuitBadPackets
Counter,
wfPppCircuitLastBadPacket
OCTET STRING,
wfPppCircuitCcpCurrentState
INTEGER,
wfPppCircuitCcpDisable
INTEGER,
wfPppCircuitPppMode
INTEGER,
wfPppCircuitMLFragPerm
INTEGER,
wfPppCircuitExamPeriod
INTEGER,
wfPppCircuitFullThreshold
INTEGER,
wfPppCircuitPeriodsCng
INTEGER,
wfPppCircuitPrefBwSlot
INTEGER,
wfPppCircuitResvBwSlot
INTEGER,
wfPppCircuitMLFragTriggerSize
INTEGER,
wfPppCircuitMaxLinks
INTEGER,
wfPppCircuitRecoverThreshold
INTEGER,
wfPppCircuitPeriodsUnCng
INTEGER,
wfPppCircuitHistory
DisplayString,
wfPppCircuitDebugFlag
INTEGER,
wfPppCircuitActualMode
INTEGER,
wfPppCircuitMaxBuffers
INTEGER,
wfPppCircuitLinksConfigured
INTEGER,
wfPppCircuitBacpDisable
INTEGER,
wfPppCircuitBacpCurrentState
INTEGER,
wfPppCircuitBacpNoPhoneNum
INTEGER,
wfPppCircuitIpv6Disable
INTEGER,
wfPppCircuitIpv6CurrentState
INTEGER,
wfPppCircuitCcpType
INTEGER,
wfPppCircuitCfgCcpOptions
INTEGER,
wfPppCircuitCcpOptions
INTEGER,
wfPppCircuitStacLZSCheckMode
INTEGER,
wfPppCircuitMLFragStrict
INTEGER,
wfPppCircuitLampreyCompDisable
INTEGER,
wfPppCircuitMsgLevel
INTEGER,
wfPppCircuitType
INTEGER
}
wfPppCircuitDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter"
DEFVAL { created }
::= { wfPppCircuitEntry 1 }
wfPppCircuitState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
notpresent(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"PPP state variable, Not Present, Init, Down, Up"
DEFVAL { notpresent }
::= { wfPppCircuitEntry 2 }
wfPppCircuitIpcpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the IPCP Finite State Machine"
::= { wfPppCircuitEntry 3 }
wfPppCircuitOsinlcpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the OSINLCP Finite State Machine"
::= { wfPppCircuitEntry 4 }
wfPppCircuitXnscpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the XNSCP Finite State Machine"
::= { wfPppCircuitEntry 5 }
wfPppCircuitDncpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the DNCP Finite State Machine"
::= { wfPppCircuitEntry 6 }
wfPppCircuitAtcpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the ATCP Finite State Machine"
::= { wfPppCircuitEntry 7 }
wfPppCircuitIpxcpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the IPXCP Finite State Machine"
::= { wfPppCircuitEntry 8 }
wfPppCircuitBncpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the BNCP Finite State Machine"
::= { wfPppCircuitEntry 9 }
wfPppCircuitVncpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the VNCP Finite State Machine"
::= { wfPppCircuitEntry 10 }
wfPppCircuitID OBJECT-TYPE
SYNTAX INTEGER(1..1023)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"cct number for this instance"
::= { wfPppCircuitEntry 11 }
wfPppCircuitIpDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable IP Protocol - disabling generates
a Close event to the IPCP FSM and consequently disallows
IP traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 12 }
wfPppCircuitOsinlDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable OSI Network Layer Protocol -
disabling generates a Close event to the OSINLCP FSM
and consequently disallows OSI traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 13 }
wfPppCircuitXnsDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable XNS Protocol - disabling generates
a Close event to the XNSCP FSM and consequently
disallows XNS traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 14 }
wfPppCircuitDecnetDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable DECnet Protocol - disabling generates
a Close event to the DNCP FSM and consequently
disallows DECnet traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 15 }
wfPppCircuitAppletalkDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable AppleTalk Protocol - disabling generates
a Close event to the ATCP FSM and consequently
disallows AppleTalk traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 16 }
wfPppCircuitIpxDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable IPX Protocol - disabling generates
a Close event to the IPXCP FSM and consequently
disallows IPX traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 17 }
wfPppCircuitBridgeDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable the Bridge - disabling generates
a Close event to the BNCP FSM and consequently
disallows bridge traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 18 }
wfPppCircuitVinesDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable Vines Protocol - disabling generates
a Close event to the VNCP FSM and consequently
disallows Vines traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 19 }
wfPppCircuitCfgLocalIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the IP address we're going to use"
::= { wfPppCircuitEntry 20 }
wfPppCircuitLocalIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the IP address our peer wants us to use"
::= { wfPppCircuitEntry 21 }
wfPppCircuitCfgRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the IP address we want our peer to use"
::= { wfPppCircuitEntry 22 }
wfPppCircuitRemoteIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the IP address our peer wants to use"
::= { wfPppCircuitEntry 23 }
wfPppCircuitCfgIpxNetworkNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the configured IPX Network Number to be used by
both us and our peer"
::= { wfPppCircuitEntry 24 }
wfPppCircuitIpxNetworkNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the result of IPX Network Number negotiation"
::= { wfPppCircuitEntry 25 }
wfPppCircuitIpxRemoteNodeNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"this is what we'll tell our peer to use for node
number if it sends us a 0"
::= { wfPppCircuitEntry 26 }
wfPppCircuitCfgIpxRoutingProtocol OBJECT-TYPE
SYNTAX INTEGER {
ripsap(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the desired IPX Routing Protocol to be used on
the link"
DEFVAL { ripsap }
::= { wfPppCircuitEntry 27 }
wfPppCircuitIpxRoutingProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the negotiated IPX Routing Protocol to be used on
the link"
::= { wfPppCircuitEntry 28 }
wfPppCircuitLocalIpxRouterName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"our IPX Router Name"
::= { wfPppCircuitEntry 29 }
wfPppCircuitRemoteIpxRouterName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"our peer's IPX Router Name"
::= { wfPppCircuitEntry 30 }
wfPppCircuitIpxConfigComplete OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"indicates whether or not IPXCP converged on all
required options"
::= { wfPppCircuitEntry 31 }
wfPppCircuitCfgAtNetwork OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the configured AppleTalk network number - our
peer must use the same number"
::= { wfPppCircuitEntry 32 }
wfPppCircuitAtNetwork OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the AppleTalk network number we agreed to use"
::= { wfPppCircuitEntry 33 }
wfPppCircuitCfgLocalAtNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the AppleTalk node number we're configured to use"
::= { wfPppCircuitEntry 34 }
wfPppCircuitLocalAtNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"our AppleTalk node number after negotiation"
::= { wfPppCircuitEntry 35 }
wfPppCircuitCfgRemoteAtNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the AppleTalk node number we want our peer to use"
::= { wfPppCircuitEntry 36 }
wfPppCircuitRemoteAtNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"our peer's AppleTalk node number after negotiation"
::= { wfPppCircuitEntry 37 }
wfPppCircuitCfgAtRoutingProtocol OBJECT-TYPE
SYNTAX INTEGER {
rtmp(1),
aurp(2),
abgp(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"the desired AppleTalk Routing Protocol to be used on
the link"
DEFVAL { rtmp }
::= { wfPppCircuitEntry 38 }
wfPppCircuitAtRoutingProtocol OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the negotiated AppleTalk Routing Protocol to be used on
the link"
::= { wfPppCircuitEntry 39 }
wfPppCircuitCfgBridgeEnet OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"allow/disallow Ethernet bridged frames"
DEFVAL { enabled }
::= { wfPppCircuitEntry 40 }
wfPppCircuitBridgeEnet OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"result of bridge MAC type negotiation for
Ethernet"
::= { wfPppCircuitEntry 41 }
wfPppCircuitCfgBridgeFddi OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"allow/disallow FDDI bridged frames"
DEFVAL { enabled }
::= { wfPppCircuitEntry 42 }
wfPppCircuitBridgeFddi OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"result of bridge MAC type negotiation for
FDDI"
::= { wfPppCircuitEntry 43 }
wfPppCircuitCfgBridgeTokenRing OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"allow/disallow Token Ring bridged frames"
DEFVAL { enabled }
::= { wfPppCircuitEntry 44 }
wfPppCircuitBridgeTokenRing OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"result of bridge MAC type negotiation for
Token Ring"
::= { wfPppCircuitEntry 45 }
wfPppCircuitBadPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"these are packets not in correct PPP format"
::= { wfPppCircuitEntry 46 }
wfPppCircuitLastBadPacket OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"this is the first 16 bytes of the last bad packet
we received"
::= { wfPppCircuitEntry 47 }
wfPppCircuitCcpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the CCP Finite State Machine"
::= { wfPppCircuitEntry 48 }
wfPppCircuitCcpDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable compression - disabling generates
a Close event to the CCP FSM and consequently
disallows compression traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 49 }
wfPppCircuitPppMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
nego(2),
multilink(3),
monitor(4),
dynamic-monitor(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Pre 9.0 multilines can only negotiate LCP over 1 line. The
exact line which LCP will occur on is unknown. So in order
to handle this situation we will wait until we receive an
LCP Request before we attempt to negotiate LCP by setting
the mode to PPP_MODE_PEER_SOLICITED_LCP_NEGO. If we are using
this line as a single PPP Line or we are sure our peer can
handle LCP on all the members of the multiline, PPP_MODE_NORMAL
should be selected.
Multilink is a PPP protocol extension which provides restoration
of packets which arrive out of sequence, a possibility with
multiple lines.
Multilink monitor, in conjunction with other configuration data
allows the throughput of a line to be monitored. Additional
lines can be brought into the bundle and taken down dynamically
in response to data traffic volume and other conditions."
DEFVAL { normal }
::= { wfPppCircuitEntry 50 }
wfPppCircuitMLFragPerm OBJECT-TYPE
SYNTAX INTEGER {
permitted(1),
prohibited(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter allows interoperability with PPP Multilink
implementations which do not allow fragmentation."
DEFVAL { permitted }
::= { wfPppCircuitEntry 51 }
wfPppCircuitExamPeriod OBJECT-TYPE
SYNTAX INTEGER(5..200)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This indicates the interval that the Multilink bundle should
be polled for possible congestion. This value is in
tenths of a second"
DEFVAL { 10 }
::= { wfPppCircuitEntry 52 }
wfPppCircuitFullThreshold OBJECT-TYPE
SYNTAX INTEGER(10..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the percentage of the theoretical maximum line
throughput that must be reached or exceeded before the line is
considered congested."
DEFVAL { 70 }
::= { wfPppCircuitEntry 53 }
wfPppCircuitPeriodsCng OBJECT-TYPE
SYNTAX INTEGER(1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the number of consecutive periods where the line
throughput is above the congestion threshold required to declare
the line congested and attempt corrective action."
DEFVAL { 10 }
::= { wfPppCircuitEntry 54 }
wfPppCircuitPrefBwSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the preferred bandwidth slot.
When lines are requested to be added to the Multilink bundle
this parameter denotes the slot which is asked first."
::= { wfPppCircuitEntry 55 }
wfPppCircuitResvBwSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the reserve bandwidth slot.
When lines are requested to be added to the Multilink bundle
this parameter denotes the slot which is asked if the preferred
slot can not provide a line."
::= { wfPppCircuitEntry 56 }
wfPppCircuitMLFragTriggerSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the minimum size of a packet of which Multilink
will fragment."
DEFVAL { 256 }
::= { wfPppCircuitEntry 57 }
wfPppCircuitMaxLinks OBJECT-TYPE
SYNTAX INTEGER(0..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the maximum number of links allowed in the Multilink
bundle for this circuit at any one time."
DEFVAL { 4 }
::= { wfPppCircuitEntry 58 }
wfPppCircuitRecoverThreshold OBJECT-TYPE
SYNTAX INTEGER(10..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the recovery threshold expressed as a percentage of the
theoretical maximum bundle throughput. The actual throughput must fall
below this percentage in order for the BOD circuit to
begin to remove lines from the Multilink bundle."
DEFVAL { 50 }
::= { wfPppCircuitEntry 59 }
wfPppCircuitPeriodsUnCng OBJECT-TYPE
SYNTAX INTEGER(1..100)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter is used for recovery. Once a Multilink bundle has
been declared as congested, this is the number of
consecutive examination periods where the queue depth is
below the recovery threshold value required to declare that the
bundle is no longer congested."
DEFVAL { 10 }
::= { wfPppCircuitEntry 60 }
wfPppCircuitHistory OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"DEBUG parameter - This is the BOD history buffer."
::= { wfPppCircuitEntry 61 }
wfPppCircuitDebugFlag OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DEBUG parameter - This is the BOD Debug flag, used to control
debug code for BOD."
::= { wfPppCircuitEntry 62 }
wfPppCircuitActualMode OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
multilink(3),
monitor(4),
inactive(20)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This attribute is the actual ppp mode of the circuit after
LCP has negotiated. "
DEFVAL { normal }
::= { wfPppCircuitEntry 63 }
wfPppCircuitMaxBuffers OBJECT-TYPE
SYNTAX INTEGER(10..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the maximum number of stored buffers allowed in the
Multilink Receive logic for this circuit at any one time."
DEFVAL { 30 }
::= { wfPppCircuitEntry 64 }
wfPppCircuitLinksConfigured OBJECT-TYPE
SYNTAX INTEGER(0..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the current number of lines configured for this
Multilink circuit."
::= { wfPppCircuitEntry 65 }
wfPppCircuitBacpDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable BACP Protocol - disabling generates
a Close event to the BACP FSM and consequently
disallows BAP traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 66 }
wfPppCircuitBacpCurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the BACP Finite State Machine"
::= { wfPppCircuitEntry 67 }
wfPppCircuitBacpNoPhoneNum OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable sending of the No-Phone-Number-Needed option
in BACP Call Request packets"
DEFVAL { disabled }
::= { wfPppCircuitEntry 68 }
wfPppCircuitIpv6Disable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable IPv6 Protocol - disabling generates
a Close event to the IPv6CP FSM and consequently disallows
IPv6 traffic on this circuit"
DEFVAL { disabled }
::= { wfPppCircuitEntry 69 }
wfPppCircuitIpv6CurrentState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
closed(2),
stopped(3),
closing(4),
stopping(5),
reqsent(6),
ackrcvd(7),
acksent(8),
opened(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"the current state of the Ipv6 Finite State Machine"
::= { wfPppCircuitEntry 70 }
wfPppCircuitCcpType OBJECT-TYPE
SYNTAX INTEGER {
ilccp(1),
ccp(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether to use CCP or Individual Link CCP"
DEFVAL { ccp }
::= { wfPppCircuitEntry 71 }
wfPppCircuitCfgCcpOptions OBJECT-TYPE
SYNTAX INTEGER {
all(1),
oui-wcp(2),
staclzs(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the compression protocol options in 1st
config-request"
DEFVAL { all }
::= { wfPppCircuitEntry 72 }
wfPppCircuitCcpOptions OBJECT-TYPE
SYNTAX INTEGER {
none(1),
oui-wcp(2),
staclzs(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The negotiated compression protocol option"
DEFVAL { none }
::= { wfPppCircuitEntry 73 }
wfPppCircuitStacLZSCheckMode OBJECT-TYPE
SYNTAX INTEGER {
mode0(1),
mode3(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies the check mode for STAC LZS compression protocol. See
RFC 1974 for more information."
DEFVAL { mode3 }
::= { wfPppCircuitEntry 74 }
wfPppCircuitMLFragStrict OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable strict fragmentation algorithm i.e. fragmenting a
packet when its size exceeds the threshold regardless of what the
average packet size is"
DEFVAL { disabled }
::= { wfPppCircuitEntry 75 }
wfPppCircuitLampreyCompDisable OBJECT-TYPE
SYNTAX INTEGER {
slot1 (1),
slot2 (2),
slot3 (3),
slot4 (4),
slot5 (5),
slot6 (6),
slot7 (7),
slot8 (8),
slot9 (9),
slot10 (10),
slot11 (11),
slot12 (12),
slot13 (13),
slot14 (14),
disabled(99)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable hardware compression, either from the compression
daugther card on the Lamprey or the old compression daugther
interface card on the link module, it tells you where the
compression hardware is"
DEFVAL { disabled }
::= { wfPppCircuitEntry 76 }
wfPppCircuitMsgLevel OBJECT-TYPE
SYNTAX INTEGER {
all(2031616),
debug(65536),
info(131072),
warning(262144),
fault(524288),
trace(1048576),
infofaultwarning(917504)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"PPP Circuit log messages level.
To control level of log messages
DBG_MSG_ALL 0x001f0000 - 2031616
DBG_MSG_DEBUG 0x00010000 - 65536
DBG_MSG_INFO 0x00020000 - 131072
DBG_MSG_WARNING 0x00040000 - 262144
DBG_MSG_FAULT 0x00080000 - 524288
DBG_MSG_TRACE 0x00100000 - 1048576"
DEFVAL { infofaultwarning }
::= { wfPppCircuitEntry 77 }
wfPppCircuitType OBJECT-TYPE
SYNTAX INTEGER {
unknown(9),
dialup(1),
l2tp(2),
leased(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"To differentiate between a Dial Up PPP circuit from L2TP and Leased Line"
DEFVAL { unknown }
::= { wfPppCircuitEntry 78 }
wfPppWhoamiTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfPppWhoamiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Wellfleet PPP WHOAMI Table, containing a mapping of
peer CHAP Names and the circuit numbers they map to"
::= { wfPppGroup 3 }
wfPppWhoamiEntry OBJECT-TYPE
SYNTAX WfPppWhoamiEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Map the value of this entry's CHAP Name to the
value of this entry's CCT number"
INDEX { wfPppWhoamiName }
::= { wfPppWhoamiTable 1 }
WfPppWhoamiEntry ::= SEQUENCE {
wfPppWhoamiDelete
INTEGER,
wfPppWhoamiName
DisplayString,
wfPppWhoamiCircuit
INTEGER,
wfPppWhoamiSecret
DisplayString,
wfPppWhoamiPapPassword
DisplayString,
wfPppWhoamiCctGrp
INTEGER
}
wfPppWhoamiDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter"
DEFVAL { created }
::= { wfPppWhoamiEntry 1 }
wfPppWhoamiName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Peer CHAP Name"
::= { wfPppWhoamiEntry 2 }
wfPppWhoamiCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Circuit number to map to"
::= { wfPppWhoamiEntry 3 }
wfPppWhoamiSecret OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peer CHAP Secret"
::= { wfPppWhoamiEntry 4 }
wfPppWhoamiPapPassword OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Peer Pap Password"
::= { wfPppWhoamiEntry 5 }
wfPppWhoamiCctGrp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Unnumbered circuit group to map to"
::= { wfPppWhoamiEntry 6 }
wfPppMlStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfPppMlStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Wellfleet PPP Multilink Stats Table, containing statistics
for each Multilink Circuit"
::= { wfPppGroup 4 }
wfPppMlStatsEntry OBJECT-TYPE
SYNTAX WfPppMlStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per Wellfleet circuit PPP Multilink counters"
INDEX { wfPppMlStatsCircuitID }
::= { wfPppMlStatsTable 1 }
WfPppMlStatsEntry ::= SEQUENCE {
wfPppMlStatsDelete
INTEGER,
wfPppMlStatsCircuitID
INTEGER,
wfPppMlStatsHomeSlot
INTEGER,
wfPppMlStatsLineCnt
Gauge,
wfPppMlStatsBundleSpd
Gauge,
wfPppMlStatsMrru
Gauge,
wfPppMlStatsEndptDisc
OCTET STRING,
wfPppMlStatsTxOctets
Counter,
wfPppMlStatsTxPkts
Counter,
wfPppMlStatsAvgTxListLen
Gauge,
wfPppMlStatsRxOctets
Counter,
wfPppMlStatsRxPkts
Counter,
wfPppMlStatsReasmFails
Counter,
wfPppMlStatsSeqNumberLost
Counter,
wfPppMlStatsSeqNumberArrivedLate
Counter,
wfPppMlStatsReSeqBufferCnt
Gauge,
wfPppMlStatsReSeqBufferMax
Counter,
wfPppMlStatsExceededBufferMax
Counter,
wfPppMlStatsLinkIdleEvents
Counter,
wfPppMlStatsCalcPercent
INTEGER,
wfPppMlStatsDebug
INTEGER,
wfPppMlStatsReassmBufferCnt
Gauge,
wfPppMlStatsReassmBufferMax
Counter,
wfPppMlStatsNumPktsFragmented
Counter,
wfPppMlStatsPQHiXmits
Counter,
wfPppMlStatsPQNormalXmits
Counter,
wfPppMlStatsPQLoXmits
Counter,
wfPppMlStatsPQHiClippedPkts
Counter,
wfPppMlStatsPQNormalClippedPkts
Counter,
wfPppMlStatsPQLoClippedPkts
Counter,
wfPppMlStatsPQIntrQHighWaterPkts
Gauge,
wfPppMlStatsPQHiQHighWaterPkts
Gauge,
wfPppMlStatsPQNormalQHighWaterPkts
Gauge,
wfPppMlStatsPQLoQHighWaterPkts
Gauge,
wfPppMlStatsPQHighWaterPktsClear
INTEGER,
wfPppMlStatsPQDroppedPkts
Counter,
wfPppMlStatsPQLargePkts
Counter,
wfPppMlStatsPQHiTotalOctets
Counter,
wfPppMlStatsPQNormalTotalOctets
Counter,
wfPppMlStatsPQLoTotalOctets
Counter,
wfPppMlStatsPQPktsNotQueued
Counter
}
wfPppMlStatsDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter"
DEFVAL { created }
::= { wfPppMlStatsEntry 1 }
wfPppMlStatsCircuitID OBJECT-TYPE
SYNTAX INTEGER(1..1023)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"cct number for this instance"
::= { wfPppMlStatsEntry 2 }
wfPppMlStatsHomeSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Slot on which this Multilink Control Subsystem exists"
::= { wfPppMlStatsEntry 3 }
wfPppMlStatsLineCnt OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current count of lines in Multilink bundle"
::= { wfPppMlStatsEntry 4 }
wfPppMlStatsBundleSpd OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current total bandwidth of Multilink bundle"
::= { wfPppMlStatsEntry 5 }
wfPppMlStatsMrru OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Maximum Receive Reconstructed Unit (MRRU)
in use for Multilink bundle"
::= { wfPppMlStatsEntry 6 }
wfPppMlStatsEndptDisc OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Current Endpoint Discriminator in use for
Multilink bundle"
::= { wfPppMlStatsEntry 7 }
wfPppMlStatsTxOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of octets transmitted by Multilink"
::= { wfPppMlStatsEntry 8 }
wfPppMlStatsTxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of packets transmitted by Multilink"
::= { wfPppMlStatsEntry 9 }
wfPppMlStatsAvgTxListLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Average number of packets received in the transient
list by the Multilink Transmit gate."
::= { wfPppMlStatsEntry 10 }
wfPppMlStatsRxOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of octets received without error"
::= { wfPppMlStatsEntry 11 }
wfPppMlStatsRxPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of packets received by Multilink"
::= { wfPppMlStatsEntry 12 }
wfPppMlStatsReasmFails OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of packet reassembly failures"
::= { wfPppMlStatsEntry 13 }
wfPppMlStatsSeqNumberLost OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Multilink packets considered to be lost on
the wire"
::= { wfPppMlStatsEntry 14 }
wfPppMlStatsSeqNumberArrivedLate OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Multilink packets which arrive
containing an old Sequence Number. IE: packets
with a more current Sequence Number have already
been sent up to NCP"
::= { wfPppMlStatsEntry 15 }
wfPppMlStatsReSeqBufferCnt OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Multilink packets currently stored
in the ReSequencing buffer pool."
::= { wfPppMlStatsEntry 16 }
wfPppMlStatsReSeqBufferMax OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Maximum Number of Multilink packets stored
in the ReSequencing buffer pool."
::= { wfPppMlStatsEntry 17 }
wfPppMlStatsExceededBufferMax OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times a buffer needed to be stored by the
Multilink Receive logic when the count of buffers stored,
wfPppMlStatsReSeqBufferMax,was equal to the maximum allowable
for this circuit, wfPppCircuitMaxBuffers."
::= { wfPppMlStatsEntry 18 }
wfPppMlStatsLinkIdleEvents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times the Multilink Receive logic detected a
stored buffer received on a line which has been declared idle."
::= { wfPppMlStatsEntry 19 }
wfPppMlStatsCalcPercent OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"enable/disable collection of Rx percentage line usage"
DEFVAL { disabled }
::= { wfPppMlStatsEntry 20 }
wfPppMlStatsDebug OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"DEBUG parameter - this is used to control debug code for the Multilink subsystem"
::= { wfPppMlStatsEntry 21 }
wfPppMlStatsReassmBufferCnt OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Multilink packets currently stored
in the Reassembling buffer pools."
::= { wfPppMlStatsEntry 22 }
wfPppMlStatsReassmBufferMax OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Maximum Number of Multilink packets stored
in the Reassembling buffer pools."
::= { wfPppMlStatsEntry 23 }
wfPppMlStatsNumPktsFragmented OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Number of Multilink packets that were
fragmented."
::= { wfPppMlStatsEntry 24 }
wfPppMlStatsPQHiXmits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"High priority transmit count."
::= { wfPppMlStatsEntry 25 }
wfPppMlStatsPQNormalXmits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Normal priority transmit count."
::= { wfPppMlStatsEntry 26 }
wfPppMlStatsPQLoXmits OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Low priority transmit count"
::= { wfPppMlStatsEntry 27 }
wfPppMlStatsPQHiClippedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"High priority transmit clip Count"
::= { wfPppMlStatsEntry 28 }
wfPppMlStatsPQNormalClippedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Normal priority transmit clip Count"
::= { wfPppMlStatsEntry 29 }
wfPppMlStatsPQLoClippedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Low priority transmit clip Count"
::= { wfPppMlStatsEntry 30 }
wfPppMlStatsPQIntrQHighWaterPkts OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interrupt-priority Queue high-water mark"
::= { wfPppMlStatsEntry 31 }
wfPppMlStatsPQHiQHighWaterPkts OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"High-priority Queue high-water mark"
::= { wfPppMlStatsEntry 32 }
wfPppMlStatsPQNormalQHighWaterPkts OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Normal-priority Queue high-water mark"
::= { wfPppMlStatsEntry 33 }
wfPppMlStatsPQLoQHighWaterPkts OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Low-priority Queue high-water mark"
::= { wfPppMlStatsEntry 34 }
wfPppMlStatsPQHighWaterPktsClear OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Attribute to clear the high-water marks. When the MIB
changes, Priority Queueing (if ENABLED) checks to see
if HighWaterPktsClear is different than the last time the MIB
was modified in any way. If it is different,
all the high water marks (see above) are set to zero."
::= { wfPppMlStatsEntry 35 }
wfPppMlStatsPQDroppedPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Packets which were filtered in Priority Queueing"
::= { wfPppMlStatsEntry 36 }
wfPppMlStatsPQLargePkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Large Packets which became an exception to latency rules"
::= { wfPppMlStatsEntry 37 }
wfPppMlStatsPQHiTotalOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Running total of High Octets transmitted when
using Bandwidth Allocation dequeueing algorithm"
::= { wfPppMlStatsEntry 38 }
wfPppMlStatsPQNormalTotalOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Running total of Normal Octets transmitted when
using Bandwidth Allocation dequeueing algorithm"
::= { wfPppMlStatsEntry 39 }
wfPppMlStatsPQLoTotalOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Running total of Low Octets transmitted when
using Bandwidth Allocation dequeueing algorithm"
::= { wfPppMlStatsEntry 40 }
wfPppMlStatsPQPktsNotQueued OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Packets that were not Queued or Dropped by
Priority Queuing "
::= { wfPppMlStatsEntry 41 }
wfPppBapStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfPppBapStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The Wellfleet PPP BAP Stats Table, containing statistics
for each BACP Circuit"
::= { wfPppGroup 5 }
wfPppBapStatsEntry OBJECT-TYPE
SYNTAX WfPppBapStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"per Wellfleet circuit PPP BAP counters"
INDEX { wfPppBapStatsCircuitID }
::= { wfPppBapStatsTable 1 }
WfPppBapStatsEntry ::= SEQUENCE {
wfPppBapStatsDelete
INTEGER,
wfPppBapStatsCircuitID
INTEGER,
wfPppBapCallReqTx
Counter,
wfPppBapCallRespAckTx
Counter,
wfPppBapCallRespNakTx
Counter,
wfPppBapCallRespFullNakTx
Counter,
wfPppBapCallRespRejTx
Counter,
wfPppBapCallbackReqTx
Counter,
wfPppBapCallbackRespAckTx
Counter,
wfPppBapCallbackRespNakTx
Counter,
wfPppBapCallbackRespFullNakTx
Counter,
wfPppBapCallbackRespRejTx
Counter,
wfPppBapLdQueryReqTx
Counter,
wfPppBapLdQueryRespAckTx
Counter,
wfPppBapLdQueryRespNakTx
Counter,
wfPppBapLdQueryRespFullNakTx
Counter,
wfPppBapCallStatusIndFailTx
Counter,
wfPppBapCallStatusIndSuccessTx
Counter,
wfPppBapCallStatusRespTx
Counter,
wfPppBapCallReqRx
Counter,
wfPppBapCallRespAckRx
Counter,
wfPppBapCallRespNakRx
Counter,
wfPppBapCallRespFullNakRx
Counter,
wfPppBapCallRespRejRx
Counter,
wfPppBapCallbackReqRx
Counter,
wfPppBapCallbackRespAckRx
Counter,
wfPppBapCallbackRespNakRx
Counter,
wfPppBapCallbackRespFullNakRx
Counter,
wfPppBapCallbackRespRejRx
Counter,
wfPppBapLdQueryReqRx
Counter,
wfPppBapLdQueryRespAckRx
Counter,
wfPppBapLdQueryRespNakRx
Counter,
wfPppBapLdQueryRespFullNakRx
Counter,
wfPppBapCallStatusIndFailRx
Counter,
wfPppBapCallStatusIndSuccessRx
Counter,
wfPppBapCallStatusRespRx
Counter,
wfPppBapCallReqRespDiscardRx
Counter,
wfPppBapCallbackReqRespDiscardRx
Counter
}
wfPppBapStatsDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter"
DEFVAL { created }
::= { wfPppBapStatsEntry 1 }
wfPppBapStatsCircuitID OBJECT-TYPE
SYNTAX INTEGER(1..1023)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"cct number for this instance"
::= { wfPppBapStatsEntry 2 }
wfPppBapCallReqTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Requests transmitted by BAP"
::= { wfPppBapStatsEntry 3 }
wfPppBapCallRespAckTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses transmitted by BAP
with a Response Code of Request_Ack"
::= { wfPppBapStatsEntry 4 }
wfPppBapCallRespNakTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses transmitted by BAP
with a Response Code of Request_Nak"
::= { wfPppBapStatsEntry 5 }
wfPppBapCallRespFullNakTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses transmitted by BAP
with a Response Code of Request_Full_Nak"
::= { wfPppBapStatsEntry 6 }
wfPppBapCallRespRejTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses transmitted by BAP
with a Response Code of Request_Rej"
::= { wfPppBapStatsEntry 7 }
wfPppBapCallbackReqTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Requests transmitted by BAP"
::= { wfPppBapStatsEntry 8 }
wfPppBapCallbackRespAckTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses transmitted by BAP
with a Response Code of Request_Ack"
::= { wfPppBapStatsEntry 9 }
wfPppBapCallbackRespNakTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses transmitted by BAP
with a Response Code of Request_Nak"
::= { wfPppBapStatsEntry 10 }
wfPppBapCallbackRespFullNakTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses transmitted by BAP
with a Response Code of Request_Full_Nak"
::= { wfPppBapStatsEntry 11 }
wfPppBapCallbackRespRejTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses transmitted by BAP
with a Response Code of Request_Rej"
::= { wfPppBapStatsEntry 12 }
wfPppBapLdQueryReqTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Requests transmitted by BAP"
::= { wfPppBapStatsEntry 13 }
wfPppBapLdQueryRespAckTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Responses transmitted by BAP
with a Response Code of Request_Ack"
::= { wfPppBapStatsEntry 14 }
wfPppBapLdQueryRespNakTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Responses transmitted by BAP
with a Response Code of Request_Nak"
::= { wfPppBapStatsEntry 15 }
wfPppBapLdQueryRespFullNakTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Responses transmitted by BAP
with a Response Code of Request_Full_Nak"
::= { wfPppBapStatsEntry 16 }
wfPppBapCallStatusIndFailTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Status_Indications transmitted by BAP
with a non-zero Call Status"
::= { wfPppBapStatsEntry 17 }
wfPppBapCallStatusIndSuccessTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Status_Indications transmitted by BAP
with a zero Call Status"
::= { wfPppBapStatsEntry 18 }
wfPppBapCallStatusRespTx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Status_Response transmitted by BAP"
::= { wfPppBapStatsEntry 19 }
wfPppBapCallReqRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Requests received by BAP"
::= { wfPppBapStatsEntry 20 }
wfPppBapCallRespAckRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses received by BAP
with a Response Code of Request_Ack"
::= { wfPppBapStatsEntry 21 }
wfPppBapCallRespNakRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses received by BAP
with a Response Code of Request_Nak"
::= { wfPppBapStatsEntry 22 }
wfPppBapCallRespFullNakRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses received by BAP
with a Response Code of Request_Full_Nak"
::= { wfPppBapStatsEntry 23 }
wfPppBapCallRespRejRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call Responses received by BAP
with a Response Code of Request_Rej"
::= { wfPppBapStatsEntry 24 }
wfPppBapCallbackReqRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Requests received by BAP"
::= { wfPppBapStatsEntry 25 }
wfPppBapCallbackRespAckRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses received by BAP
with a Response Code of Request_Ack"
::= { wfPppBapStatsEntry 26 }
wfPppBapCallbackRespNakRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses received by BAP
with a Response Code of Request_Nak"
::= { wfPppBapStatsEntry 27 }
wfPppBapCallbackRespFullNakRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses received by BAP
with a Response Code of Request_Full_Nak"
::= { wfPppBapStatsEntry 28 }
wfPppBapCallbackRespRejRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback Responses received by BAP
with a Response Code of Request_Rej"
::= { wfPppBapStatsEntry 29 }
wfPppBapLdQueryReqRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Requests received by BAP"
::= { wfPppBapStatsEntry 30 }
wfPppBapLdQueryRespAckRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Responses received by BAP
with a Response Code of Request_Ack"
::= { wfPppBapStatsEntry 31 }
wfPppBapLdQueryRespNakRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Responses received by BAP
with a Response Code of Request_Nak"
::= { wfPppBapStatsEntry 32 }
wfPppBapLdQueryRespFullNakRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of LinkDrop Query Responses received by BAP
with a Response Code of Request_Full_Nak"
::= { wfPppBapStatsEntry 33 }
wfPppBapCallStatusIndFailRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Status_Indications received by BAP
with a non-zero Call Status"
::= { wfPppBapStatsEntry 34 }
wfPppBapCallStatusIndSuccessRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Status_Indications received by BAP
with a zero Call Status"
::= { wfPppBapStatsEntry 35 }
wfPppBapCallStatusRespRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Status_Response received by BAP"
::= { wfPppBapStatsEntry 36 }
wfPppBapCallReqRespDiscardRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Call_Response received by BAP with an
old identifier."
::= { wfPppBapStatsEntry 37 }
wfPppBapCallbackReqRespDiscardRx OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Callback_Response received by BAP with an
old identifier."
::= { wfPppBapStatsEntry 38 }
END