Wellfleet-SPAN-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
wfSpanningTree
FROM Wellfleet-COMMON-MIB;
wfBrStp OBJECT IDENTIFIER ::= { wfSpanningTree 1 }
wfBrStpBaseDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the Spanning
tree."
DEFVAL { created }
::= { wfBrStp 1 }
wfBrStpBaseEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable the spanning
tree."
DEFVAL { enabled }
::= { wfBrStp 2 }
wfBrStpBaseState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
init(3),
pres(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the spanning tree."
DEFVAL { down }
::= { wfBrStp 3 }
wfBrStpProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
declb100(2),
ieee8021d(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The version of the Spanning Tree protocol being
run."
DEFVAL { ieee8021d }
::= { wfBrStp 4 }
wfBrStpBridgeID OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Spanning Tree Bridge ID assigned to this
bridge. It is a 8-octet string. The first two
octets make up the bridge priority, and the last
six are the MAC address of this bridge, which
is commonly the MAC address of the first port
on the bridge."
::= { wfBrStp 5 }
wfBrStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time (in hundredths of a second) since the last
topology change was detected by the bridge."
::= { wfBrStp 6 }
wfBrStpTopChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of topology changes detected by
this bridge since it was last reset or initialized"
::= { wfBrStp 7 }
wfBrStpDesignatedRoot OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bridge ID of the root of the spanning tree as
determined by the Spanning Tree Protocol as
executed by the bridge. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node. It is a 8-octet
string. The first two octets make up the priority,
and the last six are the MAC address of the designated
root bridge."
::= { wfBrStp 8 }
wfBrStpRootCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The cost of the path to the root as seen from this
bridge."
::= { wfBrStp 9 }
wfBrStpRootPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port identifier of the port which offers the
lowest cost path from this bridge to the root bridge."
::= { wfBrStp 10 }
wfBrStpMaxAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum age of the Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in hundredths of a second.
This represents the value actually in use by the
bridge."
::= { wfBrStp 11 }
wfBrStpHelloTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The amount of time between transmission of
configuration BPDUs by this bridge on any port,
when it is the root of the spanning tree or
trying to become so, in hundreths of a second.
This represents the value actually in use by the bridge."
::= { wfBrStp 12 }
wfBrStpHoldTime OBJECT-TYPE
SYNTAX INTEGER {
time(100)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value that determines the interval length during
which no more than two configuration BPDUs shall be
transmitted by this bridge, in hundredths of a second."
DEFVAL { time }
::= { wfBrStp 13 }
wfBrStpForwardDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time, in hundredths of a second, that a port
on this bridge will stay in a transitional state
(e.g. LISTENING) before moving to the next state
(e.g. LEARNING). This value is also used to age
all dynamic entries in the Forwarding Database
when a topology changed has been detected and is
underway. This represents the value actually in
use by the bridge."
::= { wfBrStp 14 }
wfBrStpBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER(600..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for MaxAge when
this bridge acting as the root."
DEFVAL { 2000 }
::= { wfBrStp 15 }
wfBrStpBridgeHelloTime OBJECT-TYPE
SYNTAX INTEGER(100..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for HelloTime when
this bridge acting as the root."
DEFVAL { 200 }
::= { wfBrStp 16 }
wfBrStpBridgeForwardDelay OBJECT-TYPE
SYNTAX INTEGER(400..3000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value that all bridges use for ForwardDelay when
this bridge acting as the root."
DEFVAL { 1500 }
::= { wfBrStp 17 }
wfBrStpBaseTrueConverge OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter. Default is disabled.
Allow spanning tree convergence times to become
predictable and accurate to settings specified
in user configuration."
DEFVAL { disabled }
::= { wfBrStp 18 }
wfBrStpInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF WfBrStpInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"inst_id[1] = wfBrStpInterfaceCircuit"
::= { wfSpanningTree 2 }
wfBrStpInterfaceEntry OBJECT-TYPE
SYNTAX WfBrStpInterfaceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in wfBrStpInterface."
INDEX { wfBrStpInterfaceCircuit }
::= { wfBrStpInterfaceTable 1 }
WfBrStpInterfaceEntry ::= SEQUENCE {
wfBrStpInterfaceDelete
INTEGER,
wfBrStpInterfaceEnable
INTEGER,
wfBrStpInterfaceCircuit
INTEGER,
wfBrStpInterfacePriority
INTEGER,
wfBrStpInterfaceState
INTEGER,
wfBrStpInterfaceMultiCastAddr
OCTET STRING,
wfBrStpInterfacePathCost
INTEGER,
wfBrStpInterfaceDesignatedRoot
OCTET STRING,
wfBrStpInterfaceDesignatedCost
INTEGER,
wfBrStpInterfaceDesignatedBridge
OCTET STRING,
wfBrStpInterfaceDesignatedPort
INTEGER,
wfBrStpInterfaceForwardTransitions
Counter,
wfBrStpInterfacePktsXmitd
Counter,
wfBrStpInterfacePktsRcvd
Counter,
wfBrStpInterfaceTranslationDisable
INTEGER
}
wfBrStpInterfaceDelete OBJECT-TYPE
SYNTAX INTEGER {
created(1),
deleted(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an interface
for the Spanning Tree."
DEFVAL { created }
::= { wfBrStpInterfaceEntry 1 }
wfBrStpInterfaceEnable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an interface
for the Spanning Tree."
DEFVAL { enabled }
::= { wfBrStpInterfaceEntry 2 }
wfBrStpInterfaceCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The circuit number on which this interface is defined."
::= { wfBrStpInterfaceEntry 3 }
wfBrStpInterfacePriority OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of the priority field which is contained in
the first octet of the (2 octet long) port ID for this
circuit. The other octet of the port ID is given by
wfBrStpInterfaceCircuit."
DEFVAL { 128 }
::= { wfBrStpInterfaceEntry 4 }
wfBrStpInterfaceState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current state of the port as defined by the
application of the Spanning Tree Protocol."
DEFVAL { disabled }
::= { wfBrStpInterfaceEntry 5 }
wfBrStpInterfaceMultiCastAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address used as the destination for all
BPDU packets generated out this port."
::= { wfBrStpInterfaceEntry 6 }
wfBrStpInterfacePathCost OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The contribution of this port the the root
path cost of paths toward the spanning tree
root which include this port."
DEFVAL { 1 }
::= { wfBrStpInterfaceEntry 7 }
wfBrStpInterfaceDesignatedRoot OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique Bridge Identifier of the Bridge recorded
as the Root in the Configuration BPDUs transmitted
by the Designated Bridge for the segment to which this
port is attached. Bridge IDs are made up of a
2-byte priority field, and a 6-byte MAC address."
::= { wfBrStpInterfaceEntry 8 }
wfBrStpInterfaceDesignatedCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The path cost of the Designated Port of the
segment connected to this port. This value
is compared to the Root Path Cost field in
received bridge PDUs."
::= { wfBrStpInterfaceEntry 9 }
wfBrStpInterfaceDesignatedBridge OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for
this port's segment."
::= { wfBrStpInterfaceEntry 10 }
wfBrStpInterfaceDesignatedPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Port Identifier of the port on the Designated
Bridge for this port's segment."
::= { wfBrStpInterfaceEntry 11 }
wfBrStpInterfaceForwardTransitions OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times this port has transitioned
from the Learning State to the Forwarding state."
::= { wfBrStpInterfaceEntry 12 }
wfBrStpInterfacePktsXmitd OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of BPDU packets transmitted out this port"
::= { wfBrStpInterfaceEntry 13 }
wfBrStpInterfacePktsRcvd OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of BPDU packets received on this port"
::= { wfBrStpInterfaceEntry 14 }
wfBrStpInterfaceTranslationDisable OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Enable/Disable translation bridging parameter. Default is disabled."
DEFVAL { disabled }
::= { wfBrStpInterfaceEntry 15 }
END