| Scalar Object |
| wfAotDelete | .1.3.6.1.4.1.18.3.5.21.1.1 |
Create/Delete parameter. Default is created.
User perform an SNMP SET operation on this object
in order to create/delete AOT |
| wfAotDisable | .1.3.6.1.4.1.18.3.5.21.1.2 |
Enable/Disable parameter. Default is enabled.
User perform an SNMP SET operation on this object
in order to enable/disable AOT |
| wfAotState | .1.3.6.1.4.1.18.3.5.21.1.3 |
The current state of AOT |
| wfAotInterfaceEntry | .1.3.6.1.4.1.18.3.5.21.2.1 |
An entry in wfAotInterfaceTable |
| wfAotPeerEntry | .1.3.6.1.4.1.18.3.5.21.3.1 |
An entry in wfAotPeerTable |
| Tabular Object |
| wfAotInterfaceSlotNumber | .1.3.6.1.4.1.18.3.5.21.2.1.4 |
Slot number on which this interface is running |
| wfAotInterfaceCctNumber | .1.3.6.1.4.1.18.3.5.21.2.1.3 |
The circuit from which the connection attempt is
received that initiates a translation session. |
| wfAotInterfaceDelete | .1.3.6.1.4.1.18.3.5.21.2.1.1 |
Create/Delete attribute. Default is Created
Users perform SNMP SET operation on this object in
order to create/delete a translation interface record |
| wfAotInterfaceDisable | .1.3.6.1.4.1.18.3.5.21.2.1.2 |
Enables/Disables this mapping entry
Setting of this attribute to DISABLED will disconnect
all active sessions pertaining to this interface entry |
| wfAotInterfaceState | .1.3.6.1.4.1.18.3.5.21.2.1.5 |
The current state of the Interface |
| wfAotInterfaceType | .1.3.6.1.4.1.18.3.5.21.2.1.6 |
If this interface is point-to-point, i.e. no splitting
occurs we can straight away deliver PASC frame to designated
TCP circuit |
| wfAotInterfaceAttachedTo | .1.3.6.1.4.1.18.3.5.21.2.1.7 |
Information that this interface is attached to the Primary or
secondary PASC station |
| wfAotInterfacePktCnt | .1.3.6.1.4.1.18.3.5.21.2.1.8 |
Interface packet count ... |
| wfAotKeepaliveInterval | .1.3.6.1.4.1.18.3.5.21.2.1.9 |
Idle session timeout period, in seconds. If an established
TCP connection remains inactive for this interval, KEEPALIVE
messages will be sent to the peer (if the Keepalive Timer is
non-zero). Setting the Idle Timer to zero disables the
keepalive feature. |
| wfAotKeepaliveRto | .1.3.6.1.4.1.18.3.5.21.2.1.10 |
KEEPALIVE retransmit timeout period, in seconds. This is
the interval at which unacknowledged KEEPALIVE messages will
be retransmitted. If the Idle Timer is set to zero, this
timer ignored. If the Idle Timer is non-zero and this timer
IS zero, no KEEPALIVEs are sent and the session is terminated
upon expiration of the Idle Timer. |
| wfAotKeepaliveMaxRetry | .1.3.6.1.4.1.18.3.5.21.2.1.11 |
Number of unacknowledged KEEPALIVE messages retransmitted
before the TCP session is terminated. If this count is set
to zero, only one KEEPALIVE message will be sent. |
| wfAotPeerSlotNumber | .1.3.6.1.4.1.18.3.5.21.3.1.3 |
Slot number on which this peer entry is configured |
| wfAotPeerCctNumber | .1.3.6.1.4.1.18.3.5.21.3.1.4 |
The circuit from which the connection attempt is
received that initiates a translation session. |
| wfAotPeerRemoteIpAddr | .1.3.6.1.4.1.18.3.5.21.3.1.5 |
IP Address of the remote host with which this translation
session is established. |
| wfAotPeerLocalTcpListenPort | .1.3.6.1.4.1.18.3.5.21.3.1.7 |
Based on the field wfAotConnOriginator, SiteManager
will allow user to configure only one of following two fields:
if Originator = SELF then
through SiteManager ask user to enter PeerTcpListenPort#
else
through SiteManager ask user to enter LocalTcpListenPort#
So, in any case one of the two fields will have NULL_VALUE. |
| wfAotPeerRemoteTcpListenPort | .1.3.6.1.4.1.18.3.5.21.3.1.8 |
Peer listen port for TCP connection |
| wfAotConnOriginator | .1.3.6.1.4.1.18.3.5.21.3.1.6 |
Upon start up, based on the configuration either
partner is going to initiate TCP conn. or myself |
| wfAotPeerEntryDelete | .1.3.6.1.4.1.18.3.5.21.3.1.1 |
Create/Delete attribute. Default is Created
Users perform SNMP SET operation on this object in
order to create/delete a peer record |
| wfAotPeerEntryDisable | .1.3.6.1.4.1.18.3.5.21.3.1.2 |
Enables/Disables this mapping entry
Setting of this attribute to DISABLED will disconnect
all active sessions pertaining to this interface entry |
| wfAotPeerLocalTcpPort | .1.3.6.1.4.1.18.3.5.21.3.1.9 |
When TCP connection is established, we will have other TCP
port number available which is assigned by the system from
the available pool. We will fill in this information here
in this READ_ONLY variable. Again, based on Originator
only one of the following two fields will have valid value.
if Originator = SELF then
fill in LocalTcpPort field inside the AOT module
else
fill in PeerTcpPort field inside the AOT module
In short,
=========
For Originator = SELF
PeerTcpListenPort and LocalTcpPort entries are valid
For Originator = PARTNER
LocalTcpListenPort and PeerTcpPort entries are valid |
| wfAotPeerRemoteTcpPort | .1.3.6.1.4.1.18.3.5.21.3.1.10 |
Peer TCP port of the connection |
| Table |
| wfAotInterfaceTable | .1.3.6.1.4.1.18.3.5.21.2 |
Interface table which lists all PASYNC line entries and other
line related information |
| wfAotPeerTable | .1.3.6.1.4.1.18.3.5.21.3 |
Peer table lists all TCP connections this router will have
with its peers |
| Object Identifier |
| wfAot | .1.3.6.1.4.1.18.3.5.21.1 |