| Scalar Object |
| wfAtmDelete | .1.3.6.1.4.1.18.3.5.9.5.1.1 |
Indication to create or delete an ATM Base record. |
| wfAtmInterfaceNumber | .1.3.6.1.4.1.18.3.5.9.5.1.2 |
Number of ATM interfaces in the Wellfleet Router (entries
in the wfAtmInterfaceTable), regardless of their current state,
present on this system. |
| wfAtmOverallStatus | .1.3.6.1.4.1.18.3.5.9.5.1.3 |
Overall status of ATM interfaces in the Wellfleet Router(entries
in the wfAtmInterfaceTable) present on this system. Healthy indicates
each configured interfaces are in the UP state. An interface
anomaly is indicative of one or more of the configured
interfaces being in the DOWN State. Other Anomaly is indicative
of one or more ATM interfaces being in the INIT or NOT PRESENT
state |
| wfAtmGlobalSigStkVersion | .1.3.6.1.4.1.18.3.5.9.5.1.4 |
Global signalling stack Version. This value will be used to
by management entities to know the global version of signalling.
The intent here is to have passive placeholder. Active versions
of signalling are maintained on a per ATM interface basis in
wfAtmSscopEntry and wfAtmSigEntry. If this is considered
of no value, please remove at your earliest convenience. |
| wfAtmInterfaceEntry | .1.3.6.1.4.1.18.3.5.9.5.2.1 |
The attributes for a particular ATM DXI Interface |
| wfAtmLmiEntry | .1.3.6.1.4.1.18.3.5.9.5.3.1 |
The attributes for a particular ATM Lmi |
| wfAtmPlcpEntry | .1.3.6.1.4.1.18.3.5.9.5.4.1 |
per linenumber/llindex PLCP objects |
| wfAtmUniEntry | .1.3.6.1.4.1.18.3.5.9.5.5.1 |
per linenumber/llindex User Network Interface (UNI) objects -
wfAtmUniLineNumber and wfAtmUniLLIndex corresponds to Wellfleet
linenumber/llindex number |
| wfAtmUniAtmEntry | .1.3.6.1.4.1.18.3.5.9.5.6.1 |
per linenumber/llindex UNI ATM Layer objects -
wfAtmUniAtmLineNumber and wfAtmUniAtmLLIndex corresponds to
Wellfleet linenumber/llindex number |
| wfAtmVbrEntry | .1.3.6.1.4.1.18.3.5.9.5.8.1 |
per linenumber/llindex VBR AAL objects -
wfAtmVbrLineNumber and wfAtmVbrLLIndex corresponds to
Wellfleet linenumber/llindex number |
| wfAtmVbrSarEntry | .1.3.6.1.4.1.18.3.5.9.5.9.1 |
per linenumber/llindex VBR AAL SAR sublayer objects -
wfAtmSarLineNumber and wfAtmSarLLIndex corresponds to
Wellfleet linenumber/llindex number |
| wfAtmVbrCsEntry | .1.3.6.1.4.1.18.3.5.9.5.11.1 |
per linenumber/llindex VBR_CS objects -
wfAtmVbrCsLineNumber and wfAtmVbrCsLLIndex corresponds to
Wellfleet linenumber/llindex number |
| wfAtmVbrCsVciEntry | .1.3.6.1.4.1.18.3.5.9.5.12.1 |
per virtual circuit VBR_CS objects |
| wfAtmMpeEntry | .1.3.6.1.4.1.18.3.5.9.5.13.1 |
per circuit MPE objects - wfAtmMpeIndex
corresponds to Wellfleet circuit number |
| wfAtmPvcEntry | .1.3.6.1.4.1.18.3.5.9.5.14.1 |
per virtual circuit objects |
| wfAtmDxiEntry | .1.3.6.1.4.1.18.3.5.9.5.15.1 |
per linenumber/llindex ATM DXI objects -
wfAtmDxiLineNumber and wfAtmDxiLLIndex corresponds to
Wellfleet linenumber/llindex number |
| wfAtmDxiDxiAddrEntry | .1.3.6.1.4.1.18.3.5.9.5.16.1 |
per DXIADDR ATM DXI objects |
| wfAtmInterfaceConfEntry | .1.3.6.1.4.1.18.3.4.23.1.1.1 |
Entry definition. |
| wfAtmServiceRecordEntry | .1.3.6.1.4.1.18.3.4.23.1.2.1 |
Entry definition. |
| wfAtmSVCOptionsEntry | .1.3.6.1.4.1.18.3.4.23.1.13.1 |
Entry definition. |
| wfAtmVclConfEntry | .1.3.6.1.4.1.18.3.4.23.1.5.1 |
Entry definition. |
| wfAtmVclStatsEntry | .1.3.6.1.4.1.18.3.4.23.1.6.1 |
Entry definition. |
| wfAtmSigEntry | .1.3.6.1.4.1.18.3.4.23.1.7.1 |
This entry contains attributes needed for ATM Q.93B |
| wfAtmSscopEntry | .1.3.6.1.4.1.18.3.4.23.1.8.1 |
This entry contains attributes needed for ATM Q.SAAL |
| wfAtmIlmiEntry | .1.3.6.1.4.1.18.3.4.23.1.9.1 |
This entry contains attributes needed for ATM UME/ILMI |
| wfAtmNetPrefixEntry | .1.3.6.1.4.1.18.3.4.23.1.10.1 |
This entry contains attributes needed for a ATM Network Address Prefix |
| wfAtmTableDebugEntry | .1.3.6.1.4.1.18.3.4.23.1.11.1 |
This entry contains attributes needed for debugging internal ATM tables. |
| wfAtmAlcDrvEntry | .1.3.6.1.4.1.18.3.4.23.2.1.1 |
Entry definition. |
| wfAtmAlcXmtqEntry | .1.3.6.1.4.1.18.3.4.23.2.2.1 |
An entry in the ATM Transmit Queue Table |
| wfAtmAlcCopConfEntry | .1.3.6.1.4.1.18.3.4.23.2.3.1 |
Entry definition. |
| wfAtmAlcCopHwEntry | .1.3.6.1.4.1.18.3.4.23.2.4.1 |
Entry definition. |
| wfAtmAlcCopInfoEntry | .1.3.6.1.4.1.18.3.4.23.2.5.1 |
Entry definition. |
| wfAtmAlcCopDataPathEntry | .1.3.6.1.4.1.18.3.4.23.2.6.1 |
Entry definition. |
| wfAtmAlcCopErrorEntry | .1.3.6.1.4.1.18.3.4.23.2.7.1 |
Entry definition. |
| wfAtmAlcSarConfEntry | .1.3.6.1.4.1.18.3.4.23.2.8.1 |
Entry definition. |
| wfAtmAlcSarTrafficMgtEntry | .1.3.6.1.4.1.18.3.4.23.2.9.1 |
Entry definition. |
| wfAtmAlcSarRateQueueEntry | .1.3.6.1.4.1.18.3.4.23.2.10.1 |
Entry definition. |
| wfAtmAlcFrmConfEntry | .1.3.6.1.4.1.18.3.4.23.2.11.1 |
Entry definition. |
| wfAtmizerCfgEntry | .1.3.6.1.4.1.18.3.4.23.3.1.1 |
Information about a Transmit/Receive pair of ATMizers |
| wfAtmizerDrvCfgEntry | .1.3.6.1.4.1.18.3.4.23.3.2.1 |
Information about a particular driver |
| wfAtmizerIntfStatsEntry | .1.3.6.1.4.1.18.3.4.23.3.3.1 |
Information about a particular driver |
| wfAtmizerVclStatsEntry | .1.3.6.1.4.1.18.3.4.23.3.4.1 |
Information about a particular virtual channel |
| wfAtmizerDebugEntry | .1.3.6.1.4.1.18.3.4.23.3.5.1 |
Information about a Transmit/Receive pair of ATMizers |
| wfSonetMediumEntry | .1.3.6.1.4.1.18.3.4.24.1.1 |
An entry in the medium table |
| wfSonetSectionCurrentEntry | .1.3.6.1.4.1.18.3.4.24.2.1 |
An entry in the Section current table |
| wfSonetSectionIntervalEntry | .1.3.6.1.4.1.18.3.4.24.3.1 |
An entry in the Section Interval table |
| wfSonetLineCurrentEntry | .1.3.6.1.4.1.18.3.4.24.4.1 |
An entry in the Line current table |
| wfSonetLineIntervalEntry | .1.3.6.1.4.1.18.3.4.24.5.1 |
An entry in the Line Interval table |
| wfSonetFarEndLineCurrentEntry | .1.3.6.1.4.1.18.3.4.24.6.1 |
An entry in the FarEndLine current table |
| wfSonetFarEndLineIntervalEntry | .1.3.6.1.4.1.18.3.4.24.7.1 |
An entry in the FarEndLine Interval table |
| wfSonetPathCurrentEntry | .1.3.6.1.4.1.18.3.4.24.8.1 |
An entry in the Path current table |
| wfSonetPathIntervalEntry | .1.3.6.1.4.1.18.3.4.24.9.1 |
An entry in the Path Interval table |
| wfSonetFarEndPathCurrentEntry | .1.3.6.1.4.1.18.3.4.24.10.1 |
An entry in the Far End Path current table |
| wfSonetFarEndPathIntervalEntry | .1.3.6.1.4.1.18.3.4.24.11.1 |
An entry in the Far End Path Interval table |
| wfAtmVcGroupEntry | .1.3.6.1.4.1.18.3.4.23.1.12.1 |
Entry definition. |
| Tabular Object |
| wfAtmInterfaceLineNumber | .1.3.6.1.4.1.18.3.5.9.5.2.1.16 |
Instance identifier. This value corresponds to the line number of the
Wellfleet router. |
| wfAtmInterfaceLLIndex | .1.3.6.1.4.1.18.3.5.9.5.2.1.17 |
Instance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer. |
| wfAtmInterfaceDelete | .1.3.6.1.4.1.18.3.5.9.5.2.1.1 |
Indication to create or delete an ATM DXI interface. This will
remove ATMNET access over this interface The ATM Interface
entry instance is removed from the MIB in this case. |
| wfAtmInterfaceDisable | .1.3.6.1.4.1.18.3.5.9.5.2.1.2 |
Indicates when an ATM DXI interface is to be enabled or disabled.
Disabling will disable ATM Access over this interface. The ATM
Interface instance is NOT removed from the MIB in this case. |
| wfAtmInterfaceState | .1.3.6.1.4.1.18.3.5.9.5.2.1.3 |
Indicates the state for this interface.
The state indicates Not Present when the interface has been
configured but has not been initialized. Init state indicates
that the interface is in the process of being initialized by the
system. Up state indicates that the interface is operating
normally. Down state indicates that the ATM DXI interface is
physically or logically disabled. |
| wfAtmInterfaceCircuit | .1.3.6.1.4.1.18.3.5.9.5.2.1.4 |
The Wellfleet circuit number of this entry |
| wfAtmInterfaceMaxSupportedVCs | .1.3.6.1.4.1.18.3.5.9.5.2.1.5 |
Maximum number of VCs allowed on this interface. Initially set by
configuration system for PVCs only |
| wfAtmInterfaceVCsInUse | .1.3.6.1.4.1.18.3.5.9.5.2.1.6 |
The number of VCs that are currently configured on this interface |
| wfAtmInterfaceDescr | .1.3.6.1.4.1.18.3.5.9.5.2.1.7 |
A textual string describing this ATM interface. |
| wfAtmInterfaceType | .1.3.6.1.4.1.18.3.5.9.5.2.1.8 |
The transmission type used at the ATM interface. |
| wfAtmInterfaceLastChange | .1.3.6.1.4.1.18.3.5.9.5.2.1.9 |
The value of sysUpTime at the time the interface
entered its current operational state. If the current
state was entered prior to the last re-initialization
of the local network management subsystem, then this
object contains a zero value. |
| wfAtmInterfacePlcp | .1.3.6.1.4.1.18.3.5.9.5.2.1.10 |
Identifies the OID of the PLCP object in the MIB
If no additional transmission and/or media
specific information is available, this object has
the value { 0 0 }. |
| wfAtmMpeNull | .1.3.6.1.4.1.18.3.5.9.5.2.1.11 |
Used to select Null, Multi-Protocol Encapsulation
(RFC 1294) or Multi-Protocol Encapsulation (RFC 1483)
layer for this Interface. Null is considered VC Based
Multiplexing and is not supported for Bridging. |
| wfAtmCsNull | .1.3.6.1.4.1.18.3.5.9.5.2.1.12 |
Used to configure the type of CS_PDU encapsulation supported on the ATM
DXI interface based on the ATM Forum's ATM DXI specification. This
configuration is on a per Interface basis. The supported values are
AAL3/4, AAL5 and Null (no CS_PDU encapsulation). Null is a propriatary
configurable value when no CS_PDU encapsulation is desired. |
| wfAtmInterfaceMulticast | .1.3.6.1.4.1.18.3.5.9.5.2.1.13 |
This indicates whether the ATM service provider offers multicast service |
| wfAtmDrops | .1.3.6.1.4.1.18.3.5.9.5.2.1.14 |
The cumulative count of packet drops on this ATM Interface. |
| wfAtmInterfaceLmiDisable | .1.3.6.1.4.1.18.3.5.9.5.2.1.15 |
Indicates when an LMI entry is to be enabled or disabled. Disabling
will temporarily disable the ability to report
CSU/DSU traps and the ability to retrieve statistical information
from the CSU/DSU. The ATM LMI instance is NOT removed from the MIB
in this case. |
| wfAtmInterfaceDxiMode | .1.3.6.1.4.1.18.3.5.9.5.2.1.18 |
ATM DXI Mode. This attribute specifies the ATM DXI Mode for this
interface based on the ATM Forum's ATM DXI specification. Currently
supported is Modes 1a, 1b, 2 and Proprietary 2 (which is an earlier
version of Mode 2). |
| wfAtmUnknownVCPkts | .1.3.6.1.4.1.18.3.5.9.5.2.1.19 |
The count of packets received with an unknown VC |
| wfAtmLmiLineNumber | .1.3.6.1.4.1.18.3.5.9.5.3.1.8 |
Instance identifier. This value corresponds to the line number of the
Wellfleet router. |
| wfAtmLmiLLIndex | .1.3.6.1.4.1.18.3.5.9.5.3.1.9 |
Instance identifier. This value corresponds to the port's llindex
number. The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer. |
| wfAtmLmiState | .1.3.6.1.4.1.18.3.5.9.5.3.1.1 |
Indicates the state of the LMI for this interface
The state indicates Not Present when the LMI has been
configured but has not been initialized. Init state indicates
that the LMI is in the process of being initialized by the
system. Up state indicates that the LMI is operating
normally. Down state indicates that the LMI is
physically or logically disabled. |
| wfAtmLmiCircuit | .1.3.6.1.4.1.18.3.5.9.5.3.1.2 |
The circuit number of this entry |
| wfAtmLmiNoVCErrors | .1.3.6.1.4.1.18.3.5.9.5.3.1.3 |
The number of Frames dropped that couldn't be associated with
the LMI VPI/VCI |
| wfAtmLmiProxyRequests | .1.3.6.1.4.1.18.3.5.9.5.3.1.4 |
The number of SNMP Proxy Requests |
| wfAtmLmiCsuDsuResponses | .1.3.6.1.4.1.18.3.5.9.5.3.1.5 |
The number of CSU/DSU SNMP Responses to Proxy Requests |
| wfAtmLmiCsuDsuTraps | .1.3.6.1.4.1.18.3.5.9.5.3.1.6 |
The number of CSU/DSU SNMP Traps Received |
| wfAtmLmiOtherErrors | .1.3.6.1.4.1.18.3.5.9.5.3.1.7 |
The number of frames dropped to format or other errors. |
| wfAtmPlcpLineNumber | .1.3.6.1.4.1.18.3.5.9.5.4.1.19 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmPlcpLLIndex | .1.3.6.1.4.1.18.3.5.9.5.4.1.20 |
Instance identifier. This value corresponds to the port's
llindex. The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer. |
| wfAtmPlcpCct | .1.3.6.1.4.1.18.3.5.9.5.4.1.1 |
Identifies the DS1 or DS3 PLCP port for which this entry
contains information. This corresponds to the Wellfleet
circuit number |
| wfAtmPlcpPhysical | .1.3.6.1.4.1.18.3.5.9.5.4.1.2 |
Identifies the OID of the first object in the standard
DS1 or DS3 MIB |
| wfAtmPlcpLof | .1.3.6.1.4.1.18.3.5.9.5.4.1.3 |
True if Loss of Frame has been detected |
| wfAtmPlcpLofCFA | .1.3.6.1.4.1.18.3.5.9.5.4.1.4 |
True if Loss of Frame has been detected over the CFA time
period |
| wfAtmPlcpYellow | .1.3.6.1.4.1.18.3.5.9.5.4.1.5 |
True if PLCP Yellow (Remote Alarm Indication) has been detected |
| wfAtmPlcpYellowCFA | .1.3.6.1.4.1.18.3.5.9.5.4.1.6 |
True if PLCP Yellow (Remote Alarm Indication) has been detected
over the CFA time period |
| wfAtmPlcpStatus | .1.3.6.1.4.1.18.3.5.9.5.4.1.7 |
The value of this variable indicates the PLCP
status as indicated by the three-bit PLCP LSS
code received from the remote end. Connected is
LSS code #0, linkUp is LSS code #6, and linkDown is
code #3. OtherCode means that one of the other five
possible code values is being received. OutOfFrame
means that the PLCP is in the out of frame state,
and therefore there is no code being received. |
| wfAtmPlcpSeconds | .1.3.6.1.4.1.18.3.5.9.5.4.1.8 |
The count of seconds elapsed since event counting
began or since the counters were last cleared. The
implementation may optionally allow this variable to
be set. If set, the set value is ignored, and this
variable and all other event counters for this
object are reset to zero. |
| wfAtmPlcpBipErrors | .1.3.6.1.4.1.18.3.5.9.5.4.1.9 |
The count of PLCP Bit Interleaved Parity (BIP)
errors detected. |
| wfAtmPlcpBipESecs | .1.3.6.1.4.1.18.3.5.9.5.4.1.10 |
BIP Errored Seconds. The count of seconds during
which one or more BIP errors were detected. |
| wfAtmPlcpBipSESecs | .1.3.6.1.4.1.18.3.5.9.5.4.1.11 |
BIP Severely Errored Seconds. The count of seconds
during which five (5) or more BIP errors were detected. |
| wfAtmPlcpFebes | .1.3.6.1.4.1.18.3.5.9.5.4.1.12 |
The count of PLCP Far End Block Errors (FEBE)
detected. |
| wfAtmPlcpFebeESecs | .1.3.6.1.4.1.18.3.5.9.5.4.1.13 |
FEBE Errored Seconds. The count of seconds during
which one or more FEBE errors were detected. |
| wfAtmPlcpFebeSESecs | .1.3.6.1.4.1.18.3.5.9.5.4.1.14 |
FEBE Severely Errored Seconds. The count of seconds
during which five (5) or more FEBE errors were detected. |
| wfAtmPlcpFrameErrors | .1.3.6.1.4.1.18.3.5.9.5.4.1.15 |
The count of PLCP Frame bit errors detected. |
| wfAtmPlcpSevereFrameErrors | .1.3.6.1.4.1.18.3.5.9.5.4.1.16 |
The count of PLCP Severe Frame errors (aka Out Of
Frame Events) detected. |
| wfAtmPlcpSEFS | .1.3.6.1.4.1.18.3.5.9.5.4.1.17 |
Severely Errored Framing Seconds. The count of
seconds during which one or more PLCP Severe Frame
errors were detected. |
| wfAtmPlcpUAS | .1.3.6.1.4.1.18.3.5.9.5.4.1.18 |
Unavailable Seconds. The count of seconds during
which the PLCP service was declared to be unavailable. |
| wfAtmUniLineNumber | .1.3.6.1.4.1.18.3.5.9.5.5.1.5 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmUniLLIndex | .1.3.6.1.4.1.18.3.5.9.5.5.1.6 |
Instance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer. |
| wfAtmUniCct | .1.3.6.1.4.1.18.3.5.9.5.5.1.1 |
This corresponds to the Wellfleet circuit number |
| wfAtmUniPhysical | .1.3.6.1.4.1.18.3.5.9.5.5.1.2 |
Identifies the OID of the first object in the standard
DS1 or DS3 MIB corresponding to this ATM UNI port |
| wfAtmUniAal | .1.3.6.1.4.1.18.3.5.9.5.5.1.3 |
Identifies the AAL MIB corresponding to this ATM UNI port.
There is only one AAL currently for the DXI application. |
| wfAtmUniSeconds | .1.3.6.1.4.1.18.3.5.9.5.5.1.4 |
The count of seconds elapsed since event counting
began or since the counters were last cleared.The
implementation may optionally allow this variable to
be set.If set, the set value is ignored, and this
variable and all other event counters for this
object are reset to zero. |
| wfAtmUniAtmLineNumber | .1.3.6.1.4.1.18.3.5.9.5.6.1.9 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmUniAtmLLIndex | .1.3.6.1.4.1.18.3.5.9.5.6.1.10 |
Instance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer. |
| wfAtmUniAtmCct | .1.3.6.1.4.1.18.3.5.9.5.6.1.1 |
The ATM UNI port for which corresponds to the Wellfleet
circuit number |
| wfAtmUniAtmNoBuffers | .1.3.6.1.4.1.18.3.5.9.5.6.1.2 |
Received ATM cells discarded due to the lack of
available cell buffers |
| wfAtmUniAtmHECs | .1.3.6.1.4.1.18.3.5.9.5.6.1.3 |
Received ATM cells discarded due to an uncorrected
HEC |
| wfAtmUniAtmCHECs | .1.3.6.1.4.1.18.3.5.9.5.6.1.4 |
Received ATM cells for which a HEC error was detected
and corrected |
| wfAtmUniAtmNullCells | .1.3.6.1.4.1.18.3.5.9.5.6.1.5 |
Received Null (unassigned , empty) cells |
| wfAtmUniAtmMisdeliveredCells | .1.3.6.1.4.1.18.3.5.9.5.6.1.6 |
Received cells with an invalid VPI/VCI and were discarded |
| wfAtmUniAtmReceives | .1.3.6.1.4.1.18.3.5.9.5.6.1.7 |
Valid (non-null) ATM Cells received at this layer and passed
up |
| wfAtmUniAtmTransmits | .1.3.6.1.4.1.18.3.5.9.5.6.1.8 |
Valid (non-null) ATM Cells transmitted at this layer and passed
down to the PLCP layer |
| wfAtmVbrLineNumber | .1.3.6.1.4.1.18.3.5.9.5.8.1.5 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmVbrLLIndex | .1.3.6.1.4.1.18.3.5.9.5.8.1.6 |
Instance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower
layer in cases where the lower layer may be something other than the
physical layer. |
| wfAtmVbrCct | .1.3.6.1.4.1.18.3.5.9.5.8.1.1 |
Identifies the ATM VBR object which corresponds to the
Wellfleet circuit number |
| wfAtmVbrAtmUni | .1.3.6.1.4.1.18.3.5.9.5.8.1.2 |
Identifies the OID of the first object in the ATM UNI
MIB corresponding to this ATM VBR-AAL |
| wfAtmVbrDxi | .1.3.6.1.4.1.18.3.5.9.5.8.1.3 |
Identifies the DXI MIB corresponding to this ATM VBR-AAL.
There is only one AAL currently for the DXI application. |
| wfAtmVbrSeconds | .1.3.6.1.4.1.18.3.5.9.5.8.1.4 |
The count of seconds elapsed since event counting
began or since the counters were last cleared. The
implementation may optionally allow this variable to
be set. If set, the set value is ignored, and this
variable and all other event counters for this
object are reset to zero. |
| wfAtmVbrSarLineNumber | .1.3.6.1.4.1.18.3.5.9.5.9.1.16 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmVbrSarLLIndex | .1.3.6.1.4.1.18.3.5.9.5.9.1.17 |
Instance identifier. This value corresponds to the port's llindex.
The Lower layer index uniquely identifies the lower layer in
cases where the lower layer may be something other than the
physical layer. |
| wfAtmVbrSarCct | .1.3.6.1.4.1.18.3.5.9.5.9.1.1 |
identifies the VBR_SAR object which corresponds to the
Wellfleet circuit number |
| wfAtmVbrSarAssemblyTimer | .1.3.6.1.4.1.18.3.5.9.5.9.1.2 |
The maximum time period (milliseconds) allowed for CS_PDU
assembly process to complete. This is the time between
receipt of a BOM and receipt of an EOM SAR_PDU. |
| wfAtmVbrSarCrc10Errors | .1.3.6.1.4.1.18.3.5.9.5.9.1.3 |
The count of received SAR_PDUs discarded due to CRC10 error |
| wfAtmVbrSarCellMidErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.4 |
The count of received SAR_PDUs discarded due to an invalid
MID field value |
| wfAtmVbrSarCsPduSizeTooBigErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.5 |
The count of received SAR_PDUs discarded due to CS_PDU
size is too big . NOTE: This attribute needs to be moved to
router based CS object. |
| wfAtmVbrSarNoBufferErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.6 |
No CS_PDU assembly buffer space |
| wfAtmVbrSarComNoProcessErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.7 |
Received COM SAR_PDUs discarded due to lack of an active
CS_PDU assembly process |
| wfAtmVbrSarEomNoProcessErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.8 |
Received EOM SAR_PDUs discarded due to lack of an active
CS_PDU assembly process |
| wfAtmVbrSarCellSequenceErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.9 |
The count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
detecting a SAR sequence number error in a
received SAR_PDU. |
| wfAtmVbrSarCellLengthErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.10 |
The count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
detecting a length field error in a
received SAR_PDU. |
| wfAtmVbrSarBomBeforeEomErrors | .1.3.6.1.4.1.18.3.5.9.5.9.1.11 |
The count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
receiving a new BOM or SSM SAR_PDU for the
same VPI/VCI (and MID) before receiving the
EOM SAR_PDU. |
| wfAtmVbrSarTimeouts | .1.3.6.1.4.1.18.3.5.9.5.9.1.12 |
The count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
expiration of the assembly timer. |
| wfAtmVbrSarLengthExceeds | .1.3.6.1.4.1.18.3.5.9.5.9.1.13 |
The count of active CS_PDU assembly processes
closed (aborted, accumulation discarded) due to
receiving more SAR_PDUs (and their payloads)
than will fit in the CS_PDU assembly buffer. |
| wfAtmVbrSarReceives | .1.3.6.1.4.1.18.3.5.9.5.9.1.14 |
The count of received SAR_PDUs (all types,
i.e. BOM, COM, EOM, SSM) successfully
accumulated into a CS_PDU assembly buffer. |
| wfAtmVbrSarTransmits | .1.3.6.1.4.1.18.3.5.9.5.9.1.15 |
The count of SAR_PDUs (all types, i.e. BOM,
COM, EOM, SSM) transmitted to the ATM layer
from a CS_PDU segmentation process. |
| wfAtmVbrCsLineNumber | .1.3.6.1.4.1.18.3.5.9.5.11.1.7 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmVbrCsLLIndex | .1.3.6.1.4.1.18.3.5.9.5.11.1.8 |
Instance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer. |
| wfAtmVbrCsCct | .1.3.6.1.4.1.18.3.5.9.5.11.1.1 |
Identifies the VBR_CS object which corresponds to the Wellfleet
circuit number |
| wfAtmVbrCsBETagMismatches | .1.3.6.1.4.1.18.3.5.9.5.11.1.2 |
The count of received CS_PDUs discarded due to a mismatch when
comparing the BETag fields in the CS_PDU header and trailer. |
| wfAtmVbrCsLengthMismatches | .1.3.6.1.4.1.18.3.5.9.5.11.1.3 |
The count of received CS_PDUs discarded due to a mismatch when
comparing the CS_PDU header BASize field, the CS_PDU trailer length
field and the actual length of the CS_PDU received. |
| wfAtmVbrCsMisdeliveredPdus | .1.3.6.1.4.1.18.3.5.9.5.11.1.4 |
The count of received SAR_PDUs discarded due to an invalid
VPI/VCI detected at this layer. |
| wfAtmVbrCsReceives | .1.3.6.1.4.1.18.3.5.9.5.11.1.5 |
The count of the valid CS_PDUs received from the SAR layer and
passed on to the next upper layer for further processing. |
| wfAtmVbrCsTransmits | .1.3.6.1.4.1.18.3.5.9.5.11.1.6 |
The count of CS_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmission |
| wfAtmVbrCsVciLineNumber | .1.3.6.1.4.1.18.3.5.9.5.12.1.10 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmVbrCsVciLLIndex | .1.3.6.1.4.1.18.3.5.9.5.12.1.11 |
Instance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer. |
| wfAtmVbrCsVciIndex | .1.3.6.1.4.1.18.3.5.9.5.12.1.2 |
Identifies the VPI/VCI object for which this entry
contains information. |
| wfAtmVbrCsVciVbrCct | .1.3.6.1.4.1.18.3.5.9.5.12.1.1 |
Identifies the VBR_CS object which corresponds to the Wellfleet
circuit number |
| wfAtmVbrCsVciBETagMismatches | .1.3.6.1.4.1.18.3.5.9.5.12.1.3 |
The count of received CSVCI_PDUs discarded due to a mismatch when
comparing the BETag fields in the CSVCI_PDU header and trailer. |
| wfAtmVbrCsVciLengthMismatches | .1.3.6.1.4.1.18.3.5.9.5.12.1.4 |
The count of received CSVCI_PDUs discarded due to a mismatch when
comparing the CSVCI_PDU header BASize field, the CSVCI_PDU trailer
length field and the actual length of the CSVCI_PDU received. |
| wfAtmVbrCsVciMisdeliveredPdus | .1.3.6.1.4.1.18.3.5.9.5.12.1.5 |
The count of received SAR_PDUs discarded due to an invalid
VPI/VCI detected at this layer. |
| wfAtmVbrCsVciReceives | .1.3.6.1.4.1.18.3.5.9.5.12.1.6 |
The count of the valid CSVCI_PDUs received from the SAR layer and
passed on to the next upper layer for further processing. |
| wfAtmVbrCsVciTransmits | .1.3.6.1.4.1.18.3.5.9.5.12.1.7 |
The count of CSVCI_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmission |
| wfAtmVbrCsVciOctetReceives | .1.3.6.1.4.1.18.3.5.9.5.12.1.8 |
The octet count of the valid CSVCI_PDUs received from the
SAR layer and passed on to the next upper layer for further
processing. |
| wfAtmVbrCsVciOctetTransmits | .1.3.6.1.4.1.18.3.5.9.5.12.1.9 |
The count of CSVCI_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmission |
| wfAtmMpeIndex | .1.3.6.1.4.1.18.3.5.9.5.13.1.1 |
Identifies the MPE object for which this entry
contains information. This corresponds to the Wellfleet
circuit number |
| wfAtmMpeInvalidNlpids | .1.3.6.1.4.1.18.3.5.9.5.13.1.2 |
The count of received MPE_PDUs discarded due to an unknown
or unsupported NLPID |
| wfAtmMpeInvalidPids | .1.3.6.1.4.1.18.3.5.9.5.13.1.3 |
The count of received MPE_PDUs discarded due to an unknown
or unsupported PID |
| wfAtmMpeInvalidOuis | .1.3.6.1.4.1.18.3.5.9.5.13.1.4 |
The count of received MPE_PDUs discarded due to an unknown
or unsupported OUI |
| wfAtmMpeMisdeliveredPdus | .1.3.6.1.4.1.18.3.5.9.5.13.1.5 |
The count of received MPE_PDUs discarded due to an inactive
SAP. |
| wfAtmMpeUnsupportedControlFields | .1.3.6.1.4.1.18.3.5.9.5.13.1.6 |
The count of received MPE_PDUs discarded due to an unknown
or unsupported Control field |
| wfAtmMpeInvalidSAP | .1.3.6.1.4.1.18.3.5.9.5.13.1.7 |
The cound of received MPE_PDUs discarded due to either a
bad SSAP or DSAP (RFC1483) |
| wfAtmPvcLineNumber | .1.3.6.1.4.1.18.3.5.9.5.14.1.17 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmPvcLLIndex | .1.3.6.1.4.1.18.3.5.9.5.14.1.18 |
Instance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer. |
| wfAtmPvcVpi | .1.3.6.1.4.1.18.3.5.9.5.14.1.3 |
The VPI associated with this PVC |
| wfAtmPvcVci | .1.3.6.1.4.1.18.3.5.9.5.14.1.4 |
The VCI associated with this PVC |
| wfAtmPvcDelete | .1.3.6.1.4.1.18.3.5.9.5.14.1.1 |
Used to create/delete an instance of this object.
This action will result in a PVC being added or
removed from service. |
| wfAtmPvcCct | .1.3.6.1.4.1.18.3.5.9.5.14.1.2 |
Identifies the object which corresponds to the Wellfleet
circuit number |
| wfAtmPvcReceives | .1.3.6.1.4.1.18.3.5.9.5.14.1.5 |
The count of the valid PVC_PDUs received from the SAR layer and
passed on to the next upper layer for further processing. |
| wfAtmPvcTransmits | .1.3.6.1.4.1.18.3.5.9.5.14.1.6 |
The count of PVC_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmission |
| wfAtmPvcOctetReceives | .1.3.6.1.4.1.18.3.5.9.5.14.1.7 |
The octet count of the valid PVC_PDUs received from the SAR
layer and passed on to the next upper layer for further
processing. |
| wfAtmPvcOctetTransmits | .1.3.6.1.4.1.18.3.5.9.5.14.1.8 |
The octet count of PVC_PDUs received from upper layers and
sent to the SAR layer for segmentation and transmission |
| wfAtmPvcMode | .1.3.6.1.4.1.18.3.5.9.5.14.1.9 |
The mode of the given VC.
GROUP - treats the VC as one of many vc's on a circuit.
HYBRID - treats the VC as one of many vc's on a circuit for
protocol traffic, but as a separate circuit for bridging.
DIRECT - treats the VC as a separate circuit for all applications. |
| wfAtmPvcDirectAccessCct | .1.3.6.1.4.1.18.3.5.9.5.14.1.10 |
Circuit number to use for this VC for hybrid or direct access
routing |
| wfAtmPvcState | .1.3.6.1.4.1.18.3.5.9.5.14.1.11 |
Indicates the state of the PVC.
The state indicates Not Present when the PVC has been
configured but has not been initialized. Init state indicates
that the PVC is in the process of being initialized by the
system. Up state indicates that the PVC is operating
normally. Down state indicates that the PVC is
disabled. |
| wfAtmPvcMpeNull | .1.3.6.1.4.1.18.3.5.9.5.14.1.12 |
Used to select Null, Multi-Protocol Encapsulation
(RFC 1294) or Multi-Protocol Encapsulation (RFC 1483)
layer for this PVC. Null is considered VC Based
Multiplexing and is not supported for Bridging. |
| wfAtmPvcCsNull | .1.3.6.1.4.1.18.3.5.9.5.14.1.13 |
Used to configure the type of CS_PDU encapsulation supported on
the ATM DXI PVC based on the ATM Forum's ATM DXI specification.
This configuration is on a per Direct VC basis. The supported
values are AAL3/4, AAL5 and Null (no CS_PDU encapsulation). Null
is a propriatary configurable value when no CS_PDU encapsulation
is desired. |
| wfAtmPvcDisable | .1.3.6.1.4.1.18.3.5.9.5.14.1.14 |
Used to enable/disable a PVC |
| wfAtmPvcDrops | .1.3.6.1.4.1.18.3.5.9.5.14.1.15 |
The total count of packets dropped on this VC |
| wfAtmPvcMulticast | .1.3.6.1.4.1.18.3.5.9.5.14.1.16 |
Indicates whether this VPI/VCI is used for multicast or
single destination. |
| wfAtmDxiLineNumber | .1.3.6.1.4.1.18.3.5.9.5.15.1.14 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmDxiLLIndex | .1.3.6.1.4.1.18.3.5.9.5.15.1.15 |
Instance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer. |
| wfAtmDxiComponent | .1.3.6.1.4.1.18.3.5.9.5.15.1.2 |
Identifies the component where the ATM DXI parameters are
resident - either the router or CSU/DSU. |
| wfAtmDxiCct | .1.3.6.1.4.1.18.3.5.9.5.15.1.1 |
Identifies the ATM DXI cct which corresponds to the Wellfleet
circuit number |
| wfAtmDxiMaxLmiPduLengthErrors | .1.3.6.1.4.1.18.3.5.9.5.15.1.3 |
The maximum length of an LMI PDU, measured in octets |
| wfAtmDxiSeconds | .1.3.6.1.4.1.18.3.5.9.5.15.1.4 |
The count of seconds elapsed since event counting began
or since the counters were last cleared. The implementation
may optionally allow this variable to be set. If set, the set
value is ignored , and this variable and all other event
counters for this object are reset to zero. |
| wfAtmDxiDiscardedFrames | .1.3.6.1.4.1.18.3.5.9.5.15.1.5 |
The count of received frames discarded due to lack of
buffer space. |
| wfAtmDxiAbortedFrames | .1.3.6.1.4.1.18.3.5.9.5.15.1.6 |
The count of the received frames aborted (and discarded) before
the closing flag |
| wfAtmDxiNonOctetAlignedFrames | .1.3.6.1.4.1.18.3.5.9.5.15.1.7 |
The count of the received frames discarded due to not being octet
aligned. |
| wfAtmDxiTooLongFrames | .1.3.6.1.4.1.18.3.5.9.5.15.1.8 |
The count of the received frames discarded due to being longer
than the maximum allowed frame length |
| wfAtmDxiTooShortFrames | .1.3.6.1.4.1.18.3.5.9.5.15.1.9 |
The count of the received frames discarded due to being shorter
than the minimum allowed frame length (less than 6 octets long) |
| wfAtmDxiFrameChecksumErrors | .1.3.6.1.4.1.18.3.5.9.5.15.1.10 |
The count of the received frames discarded due to detected checksum
error (CRC16) |
| wfAtmDxiFrameHeaderErrors | .1.3.6.1.4.1.18.3.5.9.5.15.1.11 |
The count of the received frames discarded due to detected frame
relay header errors |
| wfAtmDxiValidFrameReceives | .1.3.6.1.4.1.18.3.5.9.5.15.1.12 |
The count of the valid frames received. |
| wfAtmDxiFrameTransmits | .1.3.6.1.4.1.18.3.5.9.5.15.1.13 |
The count of CSVCI_PDUs received from upper layers and sent to the
SAR layer for segmentation and transmission |
| wfAtmDxiDxiAddrLineNumber | .1.3.6.1.4.1.18.3.5.9.5.16.1.8 |
Instance identifier. This value corresponds to the line number
of the Wellfleet router. |
| wfAtmDxiDxiAddrLLIndex | .1.3.6.1.4.1.18.3.5.9.5.16.1.9 |
Instance identifier. This value corresponds to the port's
llindex number. The Lower layer index uniquely identifies the
lower layer in cases where the lower layer may be something other
than the physical layer. |
| wfAtmDxiDxiAddrDxiComponent | .1.3.6.1.4.1.18.3.5.9.5.16.1.2 |
Identifies the component where the ATM DXI parameters are
resident - either the router or CSU/DSU. |
| wfAtmDxiDxiAddrIndex | .1.3.6.1.4.1.18.3.5.9.5.16.1.3 |
Identifies the DXIADDR object for which this entry
contains information. |
| wfAtmDxiDxiAddrDxiCct | .1.3.6.1.4.1.18.3.5.9.5.16.1.1 |
Identifies the Atm Dxi object for which this entry
contains information. This attribute corresponds to the Wellfleet
circuit number |
| wfAtmDxiDxiAddrAtmVbr | .1.3.6.1.4.1.18.3.5.9.5.16.1.4 |
The object identifier of the first object in the
ATM VBR-AAL MIB which corresponds to this DXIADDR
of this DXI port. If there is only one ATM VBR-AAL
object associated with this DXI object, then the
LMI DXIADDR entry in this table will have a valid
value for this variable, even though the
LMI DXIADDR has no valid VPI/VCI value.' |
| wfAtmDxiDxiAddrVpiVci | .1.3.6.1.4.1.18.3.5.9.5.16.1.5 |
The VPI/VCI of the ATM UNI of the ATM VBR-AAL
object which corresponds to this DXIADDR of this
DXI port. For the LMI DXIADDR there is no valid
VPI/VCI value. |
| wfAtmDxiDxiAddrReceives | .1.3.6.1.4.1.18.3.5.9.5.16.1.6 |
The count of the valid frames received from the next lower
layer and passed on to the next upper layer for further
processing. |
| wfAtmDxiDxiAddrTransmits | .1.3.6.1.4.1.18.3.5.9.5.16.1.7 |
The count of frames received from upper layers and sent to the
next lower layer for transmission |
| wfAtmInterfaceConfIndex | .1.3.6.1.4.1.18.3.4.23.1.1.1.2 |
Uniquely identifies the interface (port) that contains the
appropriate management information. |
| wfAtmInterfaceConfDelete | .1.3.6.1.4.1.18.3.4.23.1.1.1.1 |
Create/delete MIB instance parameter. |
| wfAtmInterfaceAdminStatus | .1.3.6.1.4.1.18.3.4.23.1.1.1.3 |
Specifies the desired administrative state of the Interface. The up and
down states indicate that the traffic flow is enabled and disabled
respectively for the VCL. |
| wfAtmInterfaceOperStatus | .1.3.6.1.4.1.18.3.4.23.1.1.1.4 |
Indicates the current operational status of the Interface. The up and
down states indicate that the Interface is currently operational, or not
operational, respectively. The Init state indicates the status
of the Interface is in the process of being initialized and has not yet
completed. The 'Not Present' state indicates a problem with that
Interface and is not able to bring the Interface up. |
| wfAtmInterfaceMaxVpcs | .1.3.6.1.4.1.18.3.4.23.1.1.1.5 |
The maximum number of VPCs supported at the ATM interface. |
| wfAtmInterfaceMaxVccs | .1.3.6.1.4.1.18.3.4.23.1.1.1.6 |
The maximum number of VCCs supported at the ATM interface. |
| wfAtmInterfaceConfVpcs | .1.3.6.1.4.1.18.3.4.23.1.1.1.7 |
The number of VPCs configured for use at the ATM interface. |
| wfAtmInterfaceConfVccs | .1.3.6.1.4.1.18.3.4.23.1.1.1.8 |
The number of VCCs configured for use at the ATM interface. |
| wfAtmInterfaceMaxActiveVpiBits | .1.3.6.1.4.1.18.3.4.23.1.1.1.9 |
The maximum number of active VPI bits configured for use at the
ATM interface. |
| wfAtmInterfaceMaxActiveVciBits | .1.3.6.1.4.1.18.3.4.23.1.1.1.10 |
The maximum number of active VCI bits configured for use at the
ATM interface. |
| wfAtmInterfaceIlmiVpi | .1.3.6.1.4.1.18.3.4.23.1.1.1.11 |
The VPI value of the VCC supporting the ILMI at this ATM interface.
If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci
are both equal to zero then the ILMI is not supported at this ATM
interface. Subract 1 from the default! (ILMI VPI = 0). |
| wfAtmInterfaceIlmiVci | .1.3.6.1.4.1.18.3.4.23.1.1.1.12 |
The VCI value of the VCC supporting the ILMI at this ATM interface.
If the values of wfAtmInterfaceIlmiVpi and wfAtmInterfaceIlmiVci
are both equal to zero then the ILMI is not supported at this ATM
interface. |
| wfAtmInterfaceAddressType | .1.3.6.1.4.1.18.3.4.23.1.1.1.13 |
The type of ATM address configured for use at the ATM interface. |
| wfAtmInterfaceCct | .1.3.6.1.4.1.18.3.4.23.1.1.1.14 |
The Wellfleet circuit number of this entry |
| wfAtmInterfaceDrops | .1.3.6.1.4.1.18.3.4.23.1.1.1.15 |
The cumulative count of packet drops on this ATM Interface above the
SSCS layer. |
| wfAtmInterfaceSigEnable | .1.3.6.1.4.1.18.3.4.23.1.1.1.16 |
Spawning of ATM Signalling by the Control gate is determined by this attr |
| wfAtmInterfaceDebug | .1.3.6.1.4.1.18.3.4.23.1.1.1.17 |
This flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging (default)
2 - enable Signalling Layer Manager inbound and outbound messages
4 - enable CC inbound messages
8 - enable CC outbound messages
16 - enable CC<->APP messages
32 - enable CC<->DRV messages
64 - enable CC<->TRILL messages
128 - enable CC PVC Interface FSM messages
256 - enable CC PVC Interface FSM messages
4294967295 - All of the above |
| wfAtmInterfaceUseHwMacAddr | .1.3.6.1.4.1.18.3.4.23.1.1.1.18 |
If this is enabled, then the auto-generated ESI portion of
the ATM address user suffix will be supplied by the hardware
driver. If disabled, it will come from
wfAtmInterfaceHwMacOverride. |
| wfAtmInterfaceHwMacOverride | .1.3.6.1.4.1.18.3.4.23.1.1.1.19 |
If wfAtmInterfaceUseHwMacAddr is disabled, this 48-bit Mac
address will replace the hardware driver's address during
auto-generation of the ESI portion of the ATM address user
suffix. |
| wfAtmServiceRecordIndex | .1.3.6.1.4.1.18.3.4.23.1.2.1.3 |
Uniquely identifies the interface (port) that contains the
appropriate port information. |
| wfAtmServiceRecordCct | .1.3.6.1.4.1.18.3.4.23.1.2.1.4 |
The Wellfleet circuit number of this entry |
| wfAtmServiceRecordDelete | .1.3.6.1.4.1.18.3.4.23.1.2.1.1 |
Create/delete MIB instance parameter. |
| wfAtmServiceRecordEnable | .1.3.6.1.4.1.18.3.4.23.1.2.1.2 |
Enable/Disable MIB instance parameter. |
| wfAtmServiceRecordAalEncapsType | .1.3.6.1.4.1.18.3.4.23.1.2.1.5 |
The type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_SERVICEREC_ENCAPS_LLCENCAPS - RFC1483
ATM_SERVICEREC_ENCAPS_FRSSCS - RFC1294
ATM_SERVICEREC_ENCAPS_ROUTEDPROTO - NONE |
| wfAtmServiceRecordState | .1.3.6.1.4.1.18.3.4.23.1.2.1.6 |
State of Service Record |
| wfAtmServiceRecordVcType | .1.3.6.1.4.1.18.3.4.23.1.2.1.7 |
The type of VC for each encapsulation. Applicable for LLC
and null type encapsulation enforced from SM - aks.
'muxedSvc' indicates SVCs that can be shared between
applications for encapsulations that support muxing.
'control' should not a configurable option. It is defined for
consistency with wfAtmVclVcType |
| wfAtmServiceRecordNetworkPrefix | .1.3.6.1.4.1.18.3.4.23.1.2.1.8 |
ATM Address Network portion |
| wfAtmServiceRecordUserSuffix | .1.3.6.1.4.1.18.3.4.23.1.2.1.9 |
ATM Address User portion |
| wfAtmServiceRecordAtmAddress | .1.3.6.1.4.1.18.3.4.23.1.2.1.10 |
ATM Address Complete - Inserted by Router after verification of
network and user portions |
| wfAtmServiceRecordFlag | .1.3.6.1.4.1.18.3.4.23.1.2.1.11 |
This will be used for internal purposes to have Site Manager flag
specific configurations. |
| wfAtmServiceRecordMtu | .1.3.6.1.4.1.18.3.4.23.1.2.1.12 |
The size of the largest packet to be used for send/receive on all
logical interfaces defined on this service record. This attribute is
an alias for 'ifMtu'. |
| wfAtmServiceRecordLossPriorityPolicy | .1.3.6.1.4.1.18.3.4.23.1.2.1.13 |
This is relevant only for Frame Relay Switch product.
This indicates the policy for translating FR DE to
ATM CLP on IP truks over ATM. |
| wfAtmServiceRecordDebug | .1.3.6.1.4.1.18.3.4.23.1.2.1.14 |
This flag will enable certain debug messages depending on the value set.
The values are as follows:
1 - disable debugging (default)
2 - enable Service State Machine debugging
4294967295 - All of the above |
| wfAtmServiceRecordName | .1.3.6.1.4.1.18.3.4.23.1.2.1.15 |
User name for circuit |
| wfAtmServiceRecordWanSvcRoutingMode | .1.3.6.1.4.1.18.3.4.23.1.2.1.16 |
This applies ONLY to WAN SVC type ATM service records.
It specifies the route updates mode for the WAN SVCs. |
| wfAtmSVCOptionsCct | .1.3.6.1.4.1.18.3.4.23.1.13.1.3 |
Circuit Number to which this SVC Options Entry belongs
to. (Instance Id 1) |
| wfAtmSVCOptionsIndex | .1.3.6.1.4.1.18.3.4.23.1.13.1.4 |
Sequential index number assigned by configuration tool
(Instance Id 2) |
| wfAtmSVCOptionsDelete | .1.3.6.1.4.1.18.3.4.23.1.13.1.1 |
Create/delete MIB instance parameter. |
| wfAtmSVCOptionsDisable | .1.3.6.1.4.1.18.3.4.23.1.13.1.2 |
Enable/Disable MIB instance parameter. |
| wfAtmSVCOptionsAdjHostAtmAddr | .1.3.6.1.4.1.18.3.4.23.1.13.1.5 |
ATM Address of the adjacent host to which these SVC config
parameters apply. |
| wfAtmSVCOptionsXmtPeakCellRate | .1.3.6.1.4.1.18.3.4.23.1.13.1.6 |
Forward Peak Cell Rate (in cells/sec) of the SVC to
this adjacent host |
| wfAtmSVCOptionsXmtSustCellRate | .1.3.6.1.4.1.18.3.4.23.1.13.1.7 |
Forward Sustainable Cell Rate (in cells/sec) of the SVC to
this adjacent host |
| wfAtmSVCOptionsRcvPeakCellRate | .1.3.6.1.4.1.18.3.4.23.1.13.1.8 |
Backward Peak Cell Rate (in cells/sec) of the SVC to
this adjacent host |
| wfAtmSVCOptionsRcvSustCellRate | .1.3.6.1.4.1.18.3.4.23.1.13.1.9 |
Backward Sustainable Cell Rate (in cells/sec) of the SVC to
this adjacent host |
| wfAtmVclConfIndex | .1.3.6.1.4.1.18.3.4.23.1.5.1.2 |
Uniquely identifies the interface (port) that contains the
appropriate management information. |
| wfAtmVclConfVpi | .1.3.6.1.4.1.18.3.4.23.1.5.1.3 |
The VPI value of the VCL. The maximum VPI value cannot exceed the
value allowable by the wfAtmInterfaceMaxActiveVpiBits. |
| wfAtmVclConfVci | .1.3.6.1.4.1.18.3.4.23.1.5.1.4 |
The VCI value of the VCL. The maximum VCI value cannot exceed the
value allowable by the wfAtmInterfaceMaxActiveVciBits. |
| wfAtmVclConfDelete | .1.3.6.1.4.1.18.3.4.23.1.5.1.1 |
Create/delete MIB instance parameter. |
| wfAtmVclAdminStatus | .1.3.6.1.4.1.18.3.4.23.1.5.1.5 |
Specifies the desired administrative state of the VCL. The up and
down states indicate that the traffic flow is enabled and disabled
respectively for the VCL. |
| wfAtmVclOperStatus | .1.3.6.1.4.1.18.3.4.23.1.5.1.6 |
Indicates the current operational status of the VCL. The up and
down states indicate that the VCL is currently operational, or not
operational, respectively. The Init state indicates the status
of the VCL is in the process of being initialized and has not yet
completed. The 'Not Present' state indicates a problem with that
VCL and is not able to bring the VCC up. The 'misconfig' state
indicates the VC is misconfigured. |
| wfAtmVclLastChange | .1.3.6.1.4.1.18.3.4.23.1.5.1.7 |
The value of MIBII's sysUpTime at the time this VCL entered its
current operational state. If the current state was entered prior
to the last re-initialization of the agent then this object
contains a zero value. |
| wfAtmVclXmtPeakCellRate | .1.3.6.1.4.1.18.3.4.23.1.5.1.8 |
Transmit (Forward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection. |
| wfAtmVclXmtSustainableCellRate | .1.3.6.1.4.1.18.3.4.23.1.5.1.9 |
Transmit (Forward) Sustainable Cell Rate in cells/second. This specifies
the upper bound on the conforming average rate of an ATM connection,
where 'average rate' is the number of cells transmitted divided by
the 'duration of the connection'. |
| wfAtmVclXmtBurstSize | .1.3.6.1.4.1.18.3.4.23.1.5.1.10 |
Transmit (Forward) Burst Size in cells. |
| wfAtmVclXmtQosClass | .1.3.6.1.4.1.18.3.4.23.1.5.1.11 |
Transmit (Forward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| wfAtmVclRcvPeakCellRate | .1.3.6.1.4.1.18.3.4.23.1.5.1.12 |
Receive (Backward) Peak Cell Rate in cells/second. This specifies
the upper bound on the traffic that can be submitted on an ATM
connection. |
| wfAtmVclRcvSustainableCellRate | .1.3.6.1.4.1.18.3.4.23.1.5.1.13 |
Receive (Backward) Sustainable Cell Rate in cells/second. This specifies
the upper bound on the conforming average rate of an ATM connection,
where 'average rate' is the number of cells transmitted divided by
the 'duration of the connection'. |
| wfAtmVclRcvBurstSize | .1.3.6.1.4.1.18.3.4.23.1.5.1.14 |
Receive (Backward) Burst Size in cells. |
| wfAtmVclRcvQosClass | .1.3.6.1.4.1.18.3.4.23.1.5.1.15 |
Receive (Backward) Quality of Service as specified in Appendix A,
Section 4 of the ATM Forum UNI Specification, Version 3.0 |
| wfAtmVclAalType | .1.3.6.1.4.1.18.3.4.23.1.5.1.16 |
The type of AAL used on the VCL. |
| wfAtmVclAalCpcsTransmitSduSize | .1.3.6.1.4.1.18.3.4.23.1.5.1.17 |
The maximum AAL CPCS SDU size in octets that is supported on the
transmit direction of this VCC. |
| wfAtmVclAalCpcsReceiveSduSize | .1.3.6.1.4.1.18.3.4.23.1.5.1.18 |
The maximum AAL CPCS SDU size in octets that is supported on the
receive direction of this VCC. |
| wfAtmVclAalEncapsType | .1.3.6.1.4.1.18.3.4.23.1.5.1.19 |
The type of data encapsulation used over both AAL3/4 and
AAL5 SSCS layer. Currently, the only values supported are :
ATM_VCLENCAPS_LLCENCAPS - RFC1483
ATM_VCLENCAPS_ROUTEDPROTO - NONE |
| wfAtmVclCongestionIndication | .1.3.6.1.4.1.18.3.4.23.1.5.1.20 |
The desired state of the Congestion Indication (CI) bit in the
payload field of each ATM cell for this VCL. |
| wfAtmVclCellLossPriority | .1.3.6.1.4.1.18.3.4.23.1.5.1.21 |
The desired state of the Cell Loss Priority (CLP) bit in the ATM
header of each cell for this VCL. For 'drop-preference', the CLP
bit will be set if the internal drop preference bit is set. |
| wfAtmVclCct | .1.3.6.1.4.1.18.3.4.23.1.5.1.22 |
Identifies the object which corresponds to the Wellfleet circuit
number |
| wfAtmVclDirectAccessCct | .1.3.6.1.4.1.18.3.4.23.1.5.1.23 |
Circuit number to use for this VC for hybrid or direct access
routing |
| wfAtmVclMulticast | .1.3.6.1.4.1.18.3.4.23.1.5.1.24 |
Indicates whether this VPI/VCI is used for multicast or
single destination. |
| wfAtmVclMode | .1.3.6.1.4.1.18.3.4.23.1.5.1.25 |
The mode of the given VC.
GROUP - treats the VC as one of many vc's on a circuit.
HYBRID - treats the VC as one of many vc's on a circuit for
protocol traffic, but as a separate circuit for bridging.
DIRECT - treats the VC as a separate circuit for all applications. |
| wfAtmVclDrops | .1.3.6.1.4.1.18.3.4.23.1.5.1.26 |
The total count of packets above the SSCS layer dropped on this VC |
| wfAtmVclVcIndex | .1.3.6.1.4.1.18.3.4.23.1.5.1.27 |
Driver-defined VCI for quick table lookup |
| wfAtmVclVcType | .1.3.6.1.4.1.18.3.4.23.1.5.1.28 |
Type of VC can be either permanent or switched. Only
permanent VCs can be modfied. switchedMux is same as switched
but is included here to be consistent with
wfAtmServiceRecordVcType |
| wfAtmVclXmtTagging | .1.3.6.1.4.1.18.3.4.23.1.5.1.29 |
Tagging forward VC messages if peak/sustainable rates exceeded |
| wfAtmVclRcvTagging | .1.3.6.1.4.1.18.3.4.23.1.5.1.30 |
Tagging backward VC messages if peak/sustainable rates exceeded |
| wfAtmVclOamLpbkEnable | .1.3.6.1.4.1.18.3.4.23.1.5.1.31 |
PVC OAM F5 Loopback function. |
| wfAtmVclOamLpbkCellInterval | .1.3.6.1.4.1.18.3.4.23.1.5.1.32 |
This is the time interval between two consecutive OAM
loopback cells in numbers of second. |
| wfAtmVclOamLpbkThreshold1 | .1.3.6.1.4.1.18.3.4.23.1.5.1.33 |
This is the number of consecutive loopback OAM cells lost
before the VC connection is declared down. |
| wfAtmVclOamLpbkThreshold2 | .1.3.6.1.4.1.18.3.4.23.1.5.1.34 |
This is the number of consecutive loopback OAM cells received
before the VC connection is declared up. |
| wfAtmVclOamAlarmEnable | .1.3.6.1.4.1.18.3.4.23.1.5.1.35 |
PVC OAM F5 alarm function. |
| wfAtmVclVcGroup | .1.3.6.1.4.1.18.3.4.23.1.5.1.36 |
The group of VCs this VC is a member of. All VCs in a given
group will have the same VcGroup. |
| wfAtmVclServiceClass | .1.3.6.1.4.1.18.3.4.23.1.5.1.37 |
The internal service class of the traffic this VC will carry |
| wfAtmVclStatsIndex | .1.3.6.1.4.1.18.3.4.23.1.6.1.1 |
Uniquely identifies the interface that contains the
appropriate management information. |
| wfAtmVclStatsVpi | .1.3.6.1.4.1.18.3.4.23.1.6.1.2 |
The Virtual Path Identifier (VPI) value of the VCL. |
| wfAtmVclStatsVci | .1.3.6.1.4.1.18.3.4.23.1.6.1.3 |
The Virtual Channel Identifier (VCI) value of the VCL. |
| wfAtmVclStatsVcIndex | .1.3.6.1.4.1.18.3.4.23.1.6.1.4 |
Uniquely identifies the virtual channel connection. |
| wfAtmVclXmtCells | .1.3.6.1.4.1.18.3.4.23.1.6.1.5 |
Accumulated total of user cells transmitted for this VCL. This
attribute is a 64-bit counter. Does not include OAM cells. |
| wfAtmVclRcvCells | .1.3.6.1.4.1.18.3.4.23.1.6.1.6 |
Accumulated total of user cells received for this VCL. This
attribute is a 64-bit counter. Does not include OAM cells. |
| wfAtmVclRcvSequenceNumErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.7 |
Number of times data was being reassembled and a SAR Protocol
Data Unit (PDU) was received out of order for this VCL. This
count is valid only when the adaptation layer protocol is
AAL 3/4. |
| wfAtmVclRcvInvalidLenErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.8 |
| wfAtmVclRcvMissingEomErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.9 |
| wfAtmVclRcvBufferOflowErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.10 |
| wfAtmVclRcvMaxLenExceedErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.11 |
| wfAtmVclRcvTrailerErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.12 |
| wfAtmVclRcvAbortErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.13 |
| wfAtmVclRcvPacketLengthErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.14 |
| wfAtmVclRcvReassemAbortErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.15 |
| wfAtmVclRcvCrcErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.16 |
| wfAtmVclXmtOamCells | .1.3.6.1.4.1.18.3.4.23.1.6.1.17 |
Count of OAM cells transmitted successfully. |
| wfAtmVclRcvOamCells | .1.3.6.1.4.1.18.3.4.23.1.6.1.18 |
Count of OAM cells received successfully. |
| wfAtmVclRcvOamCrcErrs | .1.3.6.1.4.1.18.3.4.23.1.6.1.19 |
Count of OAM cells received with CRC10 error. |
| wfAtmSigLineNumber | .1.3.6.1.4.1.18.3.4.23.1.7.1.3 |
Instance identifier. This value is the line number of the router. |
| wfAtmSigDelete | .1.3.6.1.4.1.18.3.4.23.1.7.1.1 |
Create/Delete parameter. Default is created. |
| wfAtmSigDisable | .1.3.6.1.4.1.18.3.4.23.1.7.1.2 |
Enable/Disable parameter |
| wfAtmSigAtmCct | .1.3.6.1.4.1.18.3.4.23.1.7.1.4 |
Circuit number of ATM driver associated with this Q.93B instance |
| wfAtmSigState | .1.3.6.1.4.1.18.3.4.23.1.7.1.5 |
Indicates the state of the Q.93B entity |
| wfAtmSigMaxServiceUsers | .1.3.6.1.4.1.18.3.4.23.1.7.1.6 |
Max number of SAPs (service access points) allowed for users to connect |
| wfAtmSigMaxPtPtConnections | .1.3.6.1.4.1.18.3.4.23.1.7.1.7 |
Max number of simultaneous point to point connections allowed per port |
| wfAtmSigMaxPtMultConnections | .1.3.6.1.4.1.18.3.4.23.1.7.1.8 |
Max number of simultaneous point to multipt connections allowed per port |
| wfAtmSigMaxPartiesInMultConnect | .1.3.6.1.4.1.18.3.4.23.1.7.1.9 |
Max number of simultaneous parties in a point to multipoint connection |
| wfAtmSigMaxRoutingRegistrations | .1.3.6.1.4.1.18.3.4.23.1.7.1.10 |
Max number of registrations / routing entries allowed per port |
| wfAtmSigMinBufferThreshold | .1.3.6.1.4.1.18.3.4.23.1.7.1.11 |
Min percentage of buffer pool that must be free to enable new calls (sub) |
| wfAtmSigTimerResolution | .1.3.6.1.4.1.18.3.4.23.1.7.1.12 |
Number of system ticks elapsed between successive timer events in tenths |
| wfAtmSigVpi | .1.3.6.1.4.1.18.3.4.23.1.7.1.13 |
Virtual Path Identifier for the Signalling VC |
| wfAtmSigVci | .1.3.6.1.4.1.18.3.4.23.1.7.1.14 |
Virtual Channel Identifier for the Signalling VC |
| wfAtmSigStandard | .1.3.6.1.4.1.18.3.4.23.1.7.1.15 |
Sig Protocol Standard, Uni3.0, Uni3.1, or Trillium Symmetrical Uni (sub) |
| wfAtmSigInterfaceType | .1.3.6.1.4.1.18.3.4.23.1.7.1.16 |
Network Interface type, either USER or NETWORK side (sub) |
| wfAtmSigMinVciPtPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.17 |
Minimum VCI number that can be associated with a Point to Point VC |
| wfAtmSigMaxVciPtPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.18 |
Maximum VCI number that can be associated with a Point to Point VC |
| wfAtmSigMinVpiPtPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.19 |
Minimum VPI number that can be associated with a Point to Point VC |
| wfAtmSigMaxVpiPtPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.20 |
Maximum VPI number that can be associated with a Point to Point VC |
| wfAtmSigMinVciPtMltPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.21 |
Minimum VCI number that can be associated with a Point to Multipoint VC |
| wfAtmSigMaxVciPtMltPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.22 |
Maximum VCI number that can be associated with a Point to Multipoint VC |
| wfAtmSigMinVpiPtMltPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.23 |
Minimum VPI number that can be associated with a Point to Multipoint VC |
| wfAtmSigMaxVpiPtMltPt | .1.3.6.1.4.1.18.3.4.23.1.7.1.24 |
Maximum VPI number that can be associated with a Point to Multipoint VC |
| wfAtmSigT303 | .1.3.6.1.4.1.18.3.4.23.1.7.1.25 |
Q.93B Setup Sent Timer |
| wfAtmSigT308 | .1.3.6.1.4.1.18.3.4.23.1.7.1.26 |
Q.93B Release Sent Timer |
| wfAtmSigT309 | .1.3.6.1.4.1.18.3.4.23.1.7.1.27 |
Q.93B - SAAL Data Link Connect Timer |
| wfAtmSigT310 | .1.3.6.1.4.1.18.3.4.23.1.7.1.28 |
Q.93B Call Proceeding Received Timer |
| wfAtmSigT313 | .1.3.6.1.4.1.18.3.4.23.1.7.1.29 |
Q.93B Connect Sent Timer |
| wfAtmSigT316 | .1.3.6.1.4.1.18.3.4.23.1.7.1.30 |
Q.93B Restart Request Sent on Interface Timer |
| wfAtmSigT316c | .1.3.6.1.4.1.18.3.4.23.1.7.1.31 |
Q.93B Restart Request Sent on Channel Timer |
| wfAtmSigT322 | .1.3.6.1.4.1.18.3.4.23.1.7.1.32 |
Q.93B Status Enquiry Sent Timer |
| wfAtmSigTDisc | .1.3.6.1.4.1.18.3.4.23.1.7.1.33 |
Q.93B SAAL Data Link Disconnect Timer |
| wfAtmSigT398 | .1.3.6.1.4.1.18.3.4.23.1.7.1.34 |
Q.93B Drop Party Sent Timer - Multipoint Connections only |
| wfAtmSigT399 | .1.3.6.1.4.1.18.3.4.23.1.7.1.35 |
Q.93B Add Party Sent Timer - Multipoint Connections only </ |