| Scalar Object |
| wfBrTpBaseDelete | .1.3.6.1.4.1.18.3.5.1.1.1.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the bridge. |
| wfBrTpBaseEnable | .1.3.6.1.4.1.18.3.5.1.1.1.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable the bridge. |
| wfBrTpBaseState | .1.3.6.1.4.1.18.3.5.1.1.1.1.3 |
The current state of the entire Bridge. |
| wfBrTpBaseFDBEntries | .1.3.6.1.4.1.18.3.5.1.1.1.1.4 |
The current number of forward table entries |
| wfBrTpBaseFDBSize | .1.3.6.1.4.1.18.3.5.1.1.1.1.5 |
Size of the bridge table - only looked at at boot time |
| wfBrTpBaseFDBEnable | .1.3.6.1.4.1.18.3.5.1.1.1.1.6 |
Disable placing fdb entries on the mib.
This attribute only inspected at boot time. |
| wfBrTpBaseFlushFwdTbl | .1.3.6.1.4.1.18.3.5.1.1.1.1.7 |
Flush the bridge fwd tables |
| wfBrTpBaseFDBPortChange | .1.3.6.1.4.1.18.3.5.1.1.1.1.8 |
The amount that all the stations move from
one port to anotherard table entries |
| wfBrTpFdbEntry | .1.3.6.1.4.1.18.3.5.1.1.1.2.1 |
An entry in the wfBrTpFdbTable. |
| wfBrTpAggrInPkts | .1.3.6.1.4.1.18.3.5.1.1.1.3.1 |
The total number of packets received by the transparent bridge |
| wfBrTpAggrOutPkts | .1.3.6.1.4.1.18.3.5.1.1.1.3.2 |
The total number of packets sent by the transparent bridge |
| wfBrTpAggrDiscardPkts | .1.3.6.1.4.1.18.3.5.1.1.1.3.3 |
The total number of packets discarded by the transparent bridge |
| wfBrTpInterfaceEntry | .1.3.6.1.4.1.18.3.5.1.1.3.1 |
An entry in wfBrTpInterface. |
| wfBrTrafficFilterEntry | .1.3.6.1.4.1.18.3.5.1.1.4.1 |
An entry in WfBrTrafficFilterTable. |
| Tabular Object |
| wfBrTpBaseFdbAddress | .1.3.6.1.4.1.18.3.5.1.1.1.2.1.1 |
A unicast MAC address for which the bridge has
forwarding and/or filtering information. |
| wfBrTpBaseFdbPort | .1.3.6.1.4.1.18.3.5.1.1.1.2.1.2 |
The port number on which the wfBrTpBaseFdbAddress
was learned. |
| wfBrTpBaseFdbStatus | .1.3.6.1.4.1.18.3.5.1.1.1.2.1.3 |
The status of this entry. The meanings of the
values are:
learned(3) : the value of the corresponding
instance of wfBrTpFdbPort was
learned, and is being used. |
| wfBrTpInterfaceCircuit | .1.3.6.1.4.1.18.3.5.1.1.3.1.4 |
The circuit that this interface runs over. |
| wfBrTpInterfaceDelete | .1.3.6.1.4.1.18.3.5.1.1.3.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an interface. |
| wfBrTpInterfaceEnable | .1.3.6.1.4.1.18.3.5.1.1.3.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an interface. |
| wfBrTpInterfaceState | .1.3.6.1.4.1.18.3.5.1.1.3.1.3 |
The current state of the interface. |
| wfBrTpInterfaceMaxInfo | .1.3.6.1.4.1.18.3.5.1.1.3.1.5 |
The maximum size of the INFO (non-MAC) field that
this port will receive or transmit. |
| wfBrTpInterfaceInFrames | .1.3.6.1.4.1.18.3.5.1.1.3.1.6 |
The number of frames that have been received by
this interface from its circuit. |
| wfBrTpInterfaceOutFrames | .1.3.6.1.4.1.18.3.5.1.1.3.1.7 |
The number of frames that have been transmitted
by this interface to its circuit. |
| wfBrTpInterfaceInDiscards | .1.3.6.1.4.1.18.3.5.1.1.3.1.8 |
Count of valid frames received which were
received on this interface but then discarded. |
| wfBrTpInterfaceTranslationDisable | .1.3.6.1.4.1.18.3.5.1.1.3.1.9 |
Enable/Disable translation bridging parameter. Default is enabled. |
| wfBrTrafficFilterCircuit | .1.3.6.1.4.1.18.3.5.1.1.4.1.7 |
The ID of the Bridge Circuit to which the
filter is applied. |
| wfBrTrafficFilterRuleNumber | .1.3.6.1.4.1.18.3.5.1.1.4.1.8 |
ID for the rule. |
| wfBrTrafficFilterFragment | .1.3.6.1.4.1.18.3.5.1.1.4.1.9 |
Fragment number - for large rules. |
| wfBrTrafficFilterCreate | .1.3.6.1.4.1.18.3.5.1.1.4.1.1 |
Defines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted. |
| wfBrTrafficFilterEnable | .1.3.6.1.4.1.18.3.5.1.1.4.1.2 |
Defines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule. |
| wfBrTrafficFilterStatus | .1.3.6.1.4.1.18.3.5.1.1.4.1.3 |
Defines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule. |
| wfBrTrafficFilterCounter | .1.3.6.1.4.1.18.3.5.1.1.4.1.4 |
The number of received packets that have
matched this rule. |
| wfBrTrafficFilterDefinition | .1.3.6.1.4.1.18.3.5.1.1.4.1.5 |
The filter rule definition. |
| wfBrTrafficFilterReserved | .1.3.6.1.4.1.18.3.5.1.1.4.1.6 |
Reserved field. |
| wfBrTrafficFilterName | .1.3.6.1.4.1.18.3.5.1.1.4.1.10 |
name of the rule number |
| Table |
| wfBrTpFdbTable | .1.3.6.1.4.1.18.3.5.1.1.1.2 |
A table that contains information about unicast
entries for which the bridge has forwarding and/or
filtering information. This information is used
by the transparent bridging function in
determining how to propagate a received frame.
inst = wfBrTpBaseFdbAddress |
| wfBrTpInterfaceTable | .1.3.6.1.4.1.18.3.5.1.1.3 |
A table that contains information about every
interface that is associated with this
transparent bridge.
inst_id[1] = wfBrTpInterfaceCircuit |
| wfBrTrafficFilterTable | .1.3.6.1.4.1.18.3.5.1.1.4 |
Bridge Traffic Filters |
| Object Identifier |
| wfBrLearning | .1.3.6.1.4.1.18.3.5.1.1.1 |
| wfBrTp | .1.3.6.1.4.1.18.3.5.1.1.1.1 |
| wfBrTpAggrStats | .1.3.6.1.4.1.18.3.5.1.1.1.3 |