| Scalar Object |
| wfDlsDelete | .1.3.6.1.4.1.18.3.5.1.5.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete DLSw |
| wfDlsDisable | .1.3.6.1.4.1.18.3.5.1.5.1.2 |
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET
operation on this object in order to enable/disable DLSw |
| wfDlsState | .1.3.6.1.4.1.18.3.5.1.5.1.3 |
The current state of DLSw |
| wfDlsTcpWindowSize | .1.3.6.1.4.1.18.3.5.1.5.1.4 |
The size in bytes of the windows used for the DLSw TCP connections |
| wfDlsVirtualRing | .1.3.6.1.4.1.18.3.5.1.5.1.5 |
The virtual ring number for the TCP/IP cloud. Valid values (1-4095) |
| wfDlsInternalLanId | .1.3.6.1.4.1.18.3.5.1.5.1.6 |
The source routing internal lan id. Valid Values (1-4095) |
| wfDlsBridgeId | .1.3.6.1.4.1.18.3.5.1.5.1.7 |
The source routing base bridge number. Valid Values (1-15) |
| wfDlsMaxSlotSessions | .1.3.6.1.4.1.18.3.5.1.5.1.8 |
The maximum number of LLC2 sessions to support per slot |
| wfDlsTotalCircuits | .1.3.6.1.4.1.18.3.5.1.5.1.9 |
A current count of the total number of DLSw circuits established |
| wfDlsVirtualRingMtu | .1.3.6.1.4.1.18.3.5.1.5.1.10 |
The MTU to use in explorers generated by this DLSw. It should reflect
the minimum MTU size of the entire network including the remote LANs.
Valid values (> 0) |
| wfDlsMacAgeTime | .1.3.6.1.4.1.18.3.5.1.5.1.11 |
The time in seconds before inactive MAC addresses will be aged out of
the cache. Valid values (> 20) |
| wfDlsNbAgeTime | .1.3.6.1.4.1.18.3.5.1.5.1.12 |
The time in seconds before inactive NetBIOS names will be aged out of the
cache. Valid values (> 20) |
| wfDlsUnconfPeerReject | .1.3.6.1.4.1.18.3.5.1.5.1.13 |
Allow establishment of TCP connections from peers not in the Peer Table |
| wfDlsDebugLevel1 | .1.3.6.1.4.1.18.3.5.1.5.1.14 |
First Level debug flag. Cannot be configured with Site Manager.
When this flag is set to Zero, no debug messages will be logged.
Each bit of this flag represents certain functionality in DLSw.
When this bit is set, all level2 elements that are part of this
functionality that have their bits set will be allowed to log debug
messages. |
| wfDlsDebugLevel2 | .1.3.6.1.4.1.18.3.5.1.5.1.15 |
Second Level debug flag. Cannot be configured with Site Manager.
When this flag is set to Zero, no debug messages will be logged.
Each bit of this flag represents a sub-functional element. When this
bit is set, all debug messages in this element will be logged, as long
as the related level1 functionality is set. |
| wfDlsWanKeepaliveTime | .1.3.6.1.4.1.18.3.5.1.5.1.16 |
Keepalive packets will be sent into inactive, established TCP connections
after this time interval (in seconds). A time of zero disables this
keepalive feature. |
| wfDlsPPriDisable | .1.3.6.1.4.1.18.3.5.1.5.1.17 |
Protocol Prioritization Enable/Disable parameter. Default is disabled.
Users perform an SNMP SET operation to enable/disable this feature. |
| wfDlsPPriDefaultNumQueues | .1.3.6.1.4.1.18.3.5.1.5.1.18 |
DLSw Prioritization Default number of Queues. The number of queues to be
created when establishing a Peer connection if none have been previously
defined. The default is two queues: queue number 0 and 1. |
| wfDlsPPriDefaultQBandwidth | .1.3.6.1.4.1.18.3.5.1.5.1.19 |
DLSw Prioritization Default Queues Bandwidth. The bandwidth for
each default queue. Default of: 60% queue 0, 40% queue 1 via site manager. |
| wfDlsPPriUnconfPeerDisable | .1.3.6.1.4.1.18.3.5.1.5.1.20 |
DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| wfDlsPPriUnconfPeerMaxQBuf | .1.3.6.1.4.1.18.3.5.1.5.1.21 |
DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| wfDlsPPriUnconfPeerMaxQSize | .1.3.6.1.4.1.18.3.5.1.5.1.22 |
DLSw Prioritization enabled/disabled for peers not in Peer Table. |
| wfDlsPkgMaxSize | .1.3.6.1.4.1.18.3.5.1.5.1.23 |
Maximum size of frame to sended over the WAN. Used when packaging
multiple DLS frames into a single TCP frame. The value specified must
be smaller than the wfDlsTcpWindowSize and should be no greater
than the MTU for the WAN minus the size of the TCP/IP/MAC headers. |
| wfDlsPkgTO | .1.3.6.1.4.1.18.3.5.1.5.1.24 |
DLSw packaging Time-out. Number of msec to delay a package before sending
to TCP. This value should be based on the WAN speed wfDlsPkgWinPercent
(defined below). This value should be no greater than the amount of time
it takes to send the number of outstanding bytes before packaging begins:
number bytes / (number bytes per msec)
Default of 10 msec. |
| wfDlsPkgWinPercent | .1.3.6.1.4.1.18.3.5.1.5.1.25 |
DLSw Packaging threshold. What percent of the DLS TCP window must be
outstanding inorder to delay the sending of a package being built.
Default: 20% of TCP window.
Range: 0 - 100, with 0 meaning no delay. |
| wfDlsMultislotBcasts | .1.3.6.1.4.1.18.3.5.1.5.1.26 |
Allow broadcasts inbound from the WAN to be broadcast
to all active DLSw slots. |
| wfDlsInitialPacingWindow | .1.3.6.1.4.1.18.3.5.1.5.1.27 |
Initial pacing window to be advertised in Capabilities
Exchange messages. Adaptive pacing will begin with this
value and use the state of the network to find the
proper pacing window size. |
| wfDlsRfc | .1.3.6.1.4.1.18.3.5.1.5.1.28 |
DLSw RFC mode selection.
- RFC1434 is the original implementation
- RFC1795 provides improved interoperability and flow control
- v20_unicast supports Canureach Exploring via unicast UDP
frames and provides single TCP connections
- RFC2166 additionally supports Multicast Canureach Exploring |
| wfDlsNetbiosSessionAliveFilter | .1.3.6.1.4.1.18.3.5.1.5.1.29 |
Netbios session alive filter. |
| wfDlsWanKeepaliveRetryTimer | .1.3.6.1.4.1.18.3.5.1.5.1.30 |
KEEPALIVE retransmit timeout period, in seconds. This is
the interval at which unacknowledged KEEPALIVE messages will
be retransmitted. If the Idle Timer is set to zero, this
timer ignored. If the Idle Timer is non-zero and this timer
IS zero, no KEEPALIVEs are sent and the session is terminated
upon expiration of the Idle Timer. |
| wfDlsWanKeepaliveRetries | .1.3.6.1.4.1.18.3.5.1.5.1.31 |
Number of unacknowledged KEEPALIVE messages retransmitted
before the TCP session is terminated. If this count is set
to zero, only one KEEPALIVE message will be sent. |
| wfDlsSnaFallbackAttempts | .1.3.6.1.4.1.18.3.5.1.5.1.32 |
Number of times CANUREACH_ex will be sent (for
SNA based connections) before attempting
to fall back. Used for peers configured as
wfDlsPeerTransportType = unknown to attempt
connecting via RFC 1795. |
| wfDlsNetbiosFallbackTime | .1.3.6.1.4.1.18.3.5.1.5.1.33 |
Amount of time in sec before falling back to RFC 1795
for the peers configured with wfDlsPeerTransportType = unknown,
if NETBIOS_NQ does not get answered. |
| wfDlsTcpInactTime | .1.3.6.1.4.1.18.3.5.1.5.1.34 |
Amount of time in sec after the last active DLSw circuit
has terminated or there was no data transfered over TCP
pipe, before bringing down TCP connection. Used in conjunction
with wfDlsTcpInactMethod. |
| wfDlsTcpInactMethod | .1.3.6.1.4.1.18.3.5.1.5.1.35 |
Determines when tcp connections may be brought down. Could
be due to no DLS circuits on a peer, no data passing over the
TCP link, or leave the TCP connection up.
Used in conjunction with wfDlsTcpInactTime. |
| wfDlsMslotDLCBcasts | .1.3.6.1.4.1.18.3.5.1.5.1.36 |
Allow broadcast messages inbound from the DLC to be
sent to all active DLSw slots. |
| wfDlsRsvpSupport | .1.3.6.1.4.1.18.3.5.1.5.1.37 |
Enables/Disables use of RSVP by DLSw |
| wfDlsOutBandwidth | .1.3.6.1.4.1.18.3.5.1.5.1.38 |
Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for unconfigured peers |
| wfDlsOutBurstSize | .1.3.6.1.4.1.18.3.5.1.5.1.39 |
Burst Size amount for the outgoing DLSw traffic,
to use in RSVP reservations for unconfigured peers |
| wfDlsInBandwidth | .1.3.6.1.4.1.18.3.5.1.5.1.40 |
Bandwidth amount for the incoming DLSw traffic,
to use in RSVP reservations for unconfigured peers |
| wfDlsInBurstSize | .1.3.6.1.4.1.18.3.5.1.5.1.41 |
Burst Size amount for the incoming DLSw traffic,
to use in RSVP reservations for unconfigured peers |
| wfDlsNonPeakOutBandwidth | .1.3.6.1.4.1.18.3.5.1.5.1.42 |
Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for unconfigured peers
during non-peak hours |
| wfDlsNonPeakOutBurstSize | .1.3.6.1.4.1.18.3.5.1.5.1.43 |
Burst Size amount for the outgoing DLSw traffic,
to use in RSVP reservations for unconfigured peers
during non-peak hours |
| wfDlsNonPeakInBandwidth | .1.3.6.1.4.1.18.3.5.1.5.1.44 |
Bandwidth amount for the incoming DLSw traffic,
to use in RSVP reservations for unconfigured peers
during non-peak hours |
| wfDlsNonPeakInBurstSize | .1.3.6.1.4.1.18.3.5.1.5.1.45 |
Burst Size amount for the incoming DLSw traffic,
to use in RSVP reservations for unconfigured peers
during non-peak hours |
| wfDlsNonPeakStartTime | .1.3.6.1.4.1.18.3.5.1.5.1.46 |
Start time of the non-peak hours in hhmm format and
24 hour clock. If start time is greater in value than
end time, non-peak hours ends the next day. |
| wfDlsNonPeakEndTime | .1.3.6.1.4.1.18.3.5.1.5.1.47 |
End time of the non-peak hours in hhmm 24 hour clock format |
| wfDlsNonPeakStartDays | .1.3.6.1.4.1.18.3.5.1.5.1.48 |
Bitmap of the starting days of the week for a non-peak
reservations.
The MSBit represents Sunday, the next most significant
bit represents Monday, and so on...
Default is 0 - non-peak parameters are not used. |
| wfDlsInterfaceEntry | .1.3.6.1.4.1.18.3.5.1.5.2.1 |
An entry in wfDlsInterface |
| wfDlsSlotEntry | .1.3.6.1.4.1.18.3.5.1.5.3.1 |
An entry in wfDlsSlot |
| wfDlsSapEntry | .1.3.6.1.4.1.18.3.5.1.5.4.1 |
An entry in wfDlsSap |
| wfDlsPeerEntry | .1.3.6.1.4.1.18.3.5.1.5.5.1 |
An entry in wfDlsPeer |
| wfDlsConnectionEntry | .1.3.6.1.4.1.18.3.5.1.5.6.1 |
An entry in wfDlsConnection |
| wfDlsNbEntry | .1.3.6.1.4.1.18.3.5.1.5.7.1 |
An entry in wfDlsNb |
| wfDlsMacEntry | .1.3.6.1.4.1.18.3.5.1.5.8.1 |
An entry in wfDlsMac |
| wfDlsTrafficFilterEntry | .1.3.6.1.4.1.18.3.5.1.5.9.1 |
An entry in WfDlsTrafficFilterTable |
| wfDlsDefaultMacEntry | .1.3.6.1.4.1.18.3.5.1.5.10.1 |
An entry in wfDlsNbName |
| wfDlsDefaultNbEntry | .1.3.6.1.4.1.18.3.5.1.5.11.1 |
An entry in wfDlsDefaultNb |
| wfDlsLocalDeviceEntry | .1.3.6.1.4.1.18.3.5.1.5.12.1 |
An entry in the DLSw Local Device table |
| wfDlsLocalCircuitEntry | .1.3.6.1.4.1.18.3.5.1.5.13.1 |
An entry in the DLSw Local Circuit table |
| wfDlsGenToolEntry | .1.3.6.1.4.1.18.3.5.1.5.14.1 |
An characteristics for wfDlsGenTool |
| wfDlsMcastIpEntry | .1.3.6.1.4.1.18.3.5.1.5.15.1 |
An entry in the wfDlsMcastIpTable |
| Tabular Object |
| wfDlsInterfaceCircuit | .1.3.6.1.4.1.18.3.5.1.5.2.1.4 |
The circuit that this interface runs over |
| wfDlsInterfaceDelete | .1.3.6.1.4.1.18.3.5.1.5.2.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete an interface |
| wfDlsInterfaceDisable | .1.3.6.1.4.1.18.3.5.1.5.2.1.2 |
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET
operation on this object in order to enable/disable an interface |
| wfDlsInterfaceState | .1.3.6.1.4.1.18.3.5.1.5.2.1.3 |
The current state of the interface |
| wfDlsInterfaceBridgeId | .1.3.6.1.4.1.18.3.5.1.5.2.1.5 |
The Bridge Id of the 'bridge' from the internal Lan to the TCP/IP ring.
This must be a non-Wellfleet bridge number. Valid Values (1-15) |
| wfDlsInterfaceLanId | .1.3.6.1.4.1.18.3.5.1.5.2.1.6 |
The Lan Id of the interface. Valid Values (1-4095) |
| wfDlsInterfaceDlcType | .1.3.6.1.4.1.18.3.5.1.5.2.1.7 |
The Data Link Control Type on this interface. |
| wfDlsInterfaceSdlcMode | .1.3.6.1.4.1.18.3.5.1.5.2.1.8 |
The SDLC Mode on this interface. |
| wfDlsInterfaceNbBcastDgramReduce | .1.3.6.1.4.1.18.3.5.1.5.2.1.9 |
This allows the NetBios Broadcast dgram reduction code built
into dls to be turned off. |
| wfDlsInterfaceExplorerType | .1.3.6.1.4.1.18.3.5.1.5.2.1.10 |
This allows CANUREACH test frames to be sent as
single-route or all-routes explorer frames. |
| wfDlsInterfaceNbBcastDgramCache | .1.3.6.1.4.1.18.3.5.1.5.2.1.11 |
This allows Netbios Broadcast datagram frames to be cached
along with allowing these same frames to utilize the netbios
caching mechanism. Value 1 means feature not on. Value 2
means if frame is not in cache then forward it. Value 3
means if frame is not in cache then drop it. |
| wfDlsInterfaceClrCallEnable | .1.3.6.1.4.1.18.3.5.1.5.2.1.12 |
This allows a generic (e.g. QLLC/X25) call to be cleared when
the DLS connection enters a DISCONNECTED state. |
| wfDlsSlotNumber | .1.3.6.1.4.1.18.3.5.1.5.3.1.2 |
The slot that uses this IP interface |
| wfDlsSlotDelete | .1.3.6.1.4.1.18.3.5.1.5.3.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw slot IP record |
| wfDlsSlotIpAddr | .1.3.6.1.4.1.18.3.5.1.5.3.1.3 |
The IP interface to use for TCP connections based on this slot |
| wfDlsCurrentMemory | .1.3.6.1.4.1.18.3.5.1.5.3.1.4 |
Memory currently available on this slot |
| wfDlsMaxAllowedMemory | .1.3.6.1.4.1.18.3.5.1.5.3.1.5 |
Maximum amount of memory allowed to be allocated for DLS on this slot.
4294967295 = 0xFFFFFFFF stands for infinite. (i.e. all available memory) |
| wfDlsHiWaterMark | .1.3.6.1.4.1.18.3.5.1.5.3.1.6 |
This is the maximum amount of memory ever allocated by DLS on this slot
since the last boot |
| wfDlsSlotGenDestination | .1.3.6.1.4.1.18.3.5.1.5.3.1.7 |
This is a destination slot of the GEN tool if the value is 0.
For any non-zero number, the slot is a GEN source and the
value of wfDlsSlotGenDestination is its destination slot. |
| wfDlsSlotGenSessions | .1.3.6.1.4.1.18.3.5.1.5.3.1.8 |
The maximum number of Generator sessions to support per slot |
| wfDlsSlotGenUpperMAC | .1.3.6.1.4.1.18.3.5.1.5.3.1.9 |
The upper MAC address for this slot. |
| wfDlsSlotCurrentSessions | .1.3.6.1.4.1.18.3.5.1.5.3.1.10 |
The number of sessions connected on this slot. |
| wfDlsSlotHiWaterSessions | .1.3.6.1.4.1.18.3.5.1.5.3.1.11 |
The highest number of sessions connected at one time on this slot. |
| wfDlsSlotHiWaterReset | .1.3.6.1.4.1.18.3.5.1.5.3.1.12 |
Setting to 2 (reset) sets HiWaterSessions to CurrentSessions. |
| wfDlsSapAddr | .1.3.6.1.4.1.18.3.5.1.5.4.1.2 |
The SAP to be terminated by DLSw |
| wfDlsSapDelete | .1.3.6.1.4.1.18.3.5.1.5.4.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw SAP record |
| wfDlsSapCredit | .1.3.6.1.4.1.18.3.5.1.5.4.1.3 |
The LLC2 flow control credit size for this SAP. Flow control procedures
will be invoked based on this parameter |
| wfDlsPeerIpAddr | .1.3.6.1.4.1.18.3.5.1.5.5.1.3 |
The IP address of the DLSw peer |
| wfDlsPeerDelete | .1.3.6.1.4.1.18.3.5.1.5.5.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw peer record |
| wfDlsPeerState | .1.3.6.1.4.1.18.3.5.1.5.5.1.2 |
The current state of the TCP connection with this DLSw peer |
| wfDlsPeerDefinedBy | .1.3.6.1.4.1.18.3.5.1.5.5.1.4 |
The method by which this peer was defined |
| wfDlsPeerPPriDisable | .1.3.6.1.4.1.18.3.5.1.5.5.1.5 |
DLSw Protocol Priority enabled/disabled for this Peer. The default
is to use the value specified in the DLS Base record (wfDlsPPriDisable).
Site Manager handles the setting of the default. |
| wfDlsPeerPPriMaxQBuf | .1.3.6.1.4.1.18.3.5.1.5.5.1.6 |
Protocol Priority Queue Maximum number of allocated buffers queued. |
| wfDlsPeerPPriMaxQSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.7 |
Protocol Priority Queue Maximum number of octets queued. |
| wfDlsPeerPPriClearStats | .1.3.6.1.4.1.18.3.5.1.5.5.1.8 |
Clear Protocol Priority Statistics. If prioritization is
enabled for this Peer, then modifying this attribute will
cause all Statistics kept (Queue's, CC, etc) to be cleared. |
| wfDlsPeerType | .1.3.6.1.4.1.18.3.5.1.5.5.1.9 |
The protocol type of this DLSw peer |
| wfDlsPeerTransportType | .1.3.6.1.4.1.18.3.5.1.5.5.1.10 |
The transport type of this DLSw peer |
| wfDlsPeerBackupConfig | .1.3.6.1.4.1.18.3.5.1.5.5.1.11 |
The indication of whether or not a backup peer
is to be configured for the primary peer. The
default is no which means that there is no backup
peer configured by default. A backup peer can only
be configured for a RFC1434 or RFC1795 peer. |
| wfDlsPeerBackupIpAddr | .1.3.6.1.4.1.18.3.5.1.5.5.1.12 |
The IP Address of the backup DLSw peer. |
| wfDlsPeerBackupMaxUpTime | .1.3.6.1.4.1.18.3.5.1.5.5.1.13 |
The maximum amount of time (in seconds) allowed for a
TCP connection to stay established to the backup DLSw
peer. If set to zero, this feature is disabled. Set
to anything greater than zero to enable the feature. |
| wfDlsPeerBackupHoldDownTime | .1.3.6.1.4.1.18.3.5.1.5.5.1.14 |
The amount of time (in seconds) to wait before starting
a new TCP connection to the backup DLSw peer. |
| wfDlsPeerBackupStartTime | .1.3.6.1.4.1.18.3.5.1.5.5.1.15 |
Used in conjunction with the EndTime attribute. Together
these define a time interval for when a backup peer can
be active. The start time is the beginning time of day
that a backup peer can be established. (HHMM format) |
| wfDlsPeerBackupEndTime | .1.3.6.1.4.1.18.3.5.1.5.5.1.16 |
Used in conjunction with the StartTime attribute. Together
these define a time interval for when a backup peer can
be active. The end time is the end time of day that a
backup peer can be established. If a backup peer is active
and the current time is after this end time, the backup
peer will be brought down. (HHMM format) |
| wfDlsPeerInteroperability | .1.3.6.1.4.1.18.3.5.1.5.5.1.17 |
If enabled, open write to read tcp connection for 1434 and
1795 type of peers.
Let the other side to open the other connection. |
| wfDlsPeerBackupType | .1.3.6.1.4.1.18.3.5.1.5.5.1.18 |
The type of this DLSw backup peer |
| wfDlsPeerRsvpMode | .1.3.6.1.4.1.18.3.5.1.5.5.1.19 |
Defines rsvp mode of operation for the peer:
- 1 use rsvp parameters configured in the peer;
- 2 do NOT use rsvp for this peer;
- 3 use rsvp parameters configures in wfDls object. |
| wfDlsPeerRsvpSlots | .1.3.6.1.4.1.18.3.5.1.5.5.1.20 |
Bit mask field representing the slots,
that may make RSVP resevations for this peer.
The MSBit represents slot 1, the next most significant
bit represents slot 2, and so on... Slots can be 1-14.
Default is all slots on a BCN. |
| wfDlsPeerOutBandwidth | .1.3.6.1.4.1.18.3.5.1.5.5.1.21 |
Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for this peer |
| wfDlsPeerOutBurstSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.22 |
Burst Size amount for the outgoing DLSw traffic,
to use in RSVP reservations for this peer |
| wfDlsPeerInBandwidth | .1.3.6.1.4.1.18.3.5.1.5.5.1.23 |
Bandwidth amount for the incoming DLSw traffic,
to use in RSVP reservations for this peer |
| wfDlsPeerInBurstSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.24 |
Burst Size amount for the incoming DLSw traffic,
to use in RSVP reservations for this peer |
| wfDlsPeerNonPeakOutBandwidth | .1.3.6.1.4.1.18.3.5.1.5.5.1.25 |
Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for this peer
during non-peak hours |
| wfDlsPeerNonPeakOutBurstSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.26 |
Burst Size amount for the outgoing DLSw traffic,
to use in RSVP reservations for this peer
during non-peak hours |
| wfDlsPeerNonPeakInBandwidth | .1.3.6.1.4.1.18.3.5.1.5.5.1.27 |
Bandwidth amount for the incoming DLSw traffic,
to use in RSVP reservations for this peer
during non-peak hours |
| wfDlsPeerNonPeakInBurstSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.28 |
Burst Size amount for the incoming DLSw traffic,
to use in RSVP reservations for this peer
during non-peak hours |
| wfDlsPeerNonPeakStartTime | .1.3.6.1.4.1.18.3.5.1.5.5.1.29 |
Start time of the non-peak hours in hhmm format and
24 hour clock. If start time is greater in value than
end time, non-peak hours ends the next day. |
| wfDlsPeerNonPeakEndTime | .1.3.6.1.4.1.18.3.5.1.5.5.1.30 |
End time of the non-peak hours in hhmm 24 hour clock format |
| wfDlsPeerNonPeakStartDays | .1.3.6.1.4.1.18.3.5.1.5.5.1.31 |
Bitmap of the starting days of the week for a non-peak
reservations.
The MSBit represents Sunday, the next most significant
bit represents Monday, and so on...
Default is 0 - non-peak parameters are not used. |
| wfDlsPeerBackupOutBandwidth | .1.3.6.1.4.1.18.3.5.1.5.5.1.32 |
Bandwidth amount for the outgoing DLSw traffic,
to use in RSVP reservations for the backup peer |
| wfDlsPeerBackupOutBurstSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.33 |
Burst Size amount for the outgoing DLSw traffic,
to use in RSVP reservations for the backup peer |
| wfDlsPeerBackupInBandwidth | .1.3.6.1.4.1.18.3.5.1.5.5.1.34 |
Bandwidth amount for the incoming DLSw traffic,
to use in RSVP reservations for the backup peer |
| wfDlsPeerBackupInBurstSize | .1.3.6.1.4.1.18.3.5.1.5.5.1.35 |
Burst Size amount for the incoming DLSw traffic,
to use in RSVP reservations for the backup peer |
| wfDlsConnectionCct | .1.3.6.1.4.1.18.3.5.1.5.6.1.1 |
The circuit this from which this connection originated |
| wfDlsConnectionDstMac | .1.3.6.1.4.1.18.3.5.1.5.6.1.2 |
The Destination MAC address (the LLC session target) |
| wfDlsConnectionSrcMac | .1.3.6.1.4.1.18.3.5.1.5.6.1.3 |
The Source MAC address (the LLC session originator) |
| wfDlsConnectionSaps | .1.3.6.1.4.1.18.3.5.1.5.6.1.4 |
The SAPs for this connection (DSAP, SSAP) |
| wfDlsConnectionState | .1.3.6.1.4.1.18.3.5.1.5.6.1.5 |
The DLSw state of this connection. These are the steady states of the
DLSw state machine. Transition states are not reflected |
| wfDlsConnectionRemoteIpAddr | .1.3.6.1.4.1.18.3.5.1.5.6.1.6 |
The IP address of the remote DLSw peer over which
this connection is established |
| wfDlsConnectionRemoteRxPort | .1.3.6.1.4.1.18.3.5.1.5.6.1.7 |
The TCP receive port number of the remote DLSw peer over which
this connection is established |
| wfDlsConnectionLocalIpAddr | .1.3.6.1.4.1.18.3.5.1.5.6.1.8 |
The IP address of the local DLSw peer over which
this connection is established |
| wfDlsConnectionLocalTxPort | .1.3.6.1.4.1.18.3.5.1.5.6.1.9 |
The TCP transmit port number of the local DLSw peer over which
this connection is established |
| wfDlsConnectionTxIFrames | .1.3.6.1.4.1.18.3.5.1.5.6.1.10 |
The number of Information frames transmitted from this switch
to the remote DLSw switch |
| wfDlsConnectionRxIFrames | .1.3.6.1.4.1.18.3.5.1.5.6.1.11 |
The number of Information frames received at this switch
from the remote DLSw switch |
| wfDlsConnectionTxRnrs | .1.3.6.1.4.1.18.3.5.1.5.6.1.12 |
The number of RNR frames transmitted from this switch
to the remote DLSw switch |
| wfDlsConnectionRxRnrs | .1.3.6.1.4.1.18.3.5.1.5.6.1.13 |
The number of RNR frames received at this switch
from the remote DLSw switch |
| wfDlsConnectionLocalBlockNum | .1.3.6.1.4.1.18.3.5.1.5.6.1.14 |
The block number is the first 3 hexadecimal digits of
node identification field of local XID |
| wfDlsConnectionLocalIdNum | .1.3.6.1.4.1.18.3.5.1.5.6.1.15 |
The ID number is the last 5 hexadecimal digits of
node identification field of local XID |
| wfDlsConnectionLocalCpName | .1.3.6.1.4.1.18.3.5.1.5.6.1.16 |
The local CP name |
| wfDlsConnectionRif | .1.3.6.1.4.1.18.3.5.1.5.6.1.17 |
The Rif information |
| wfDlsConnectionRemoteBlockNum | .1.3.6.1.4.1.18.3.5.1.5.6.1.18 |
The block number is the first 3 hexadecimal digits of
node identification field of remote XID |
| wfDlsConnectionRemoteIdNum | .1.3.6.1.4.1.18.3.5.1.5.6.1.19 |
The ID number is the last 5 hexadecimal digits of
node identification field of remote XID |
| wfDlsConnectionRemoteCpName | .1.3.6.1.4.1.18.3.5.1.5.6.1.20 |
The remote CP name |
| wfDlsConnectionLocalDLCorr | .1.3.6.1.4.1.18.3.5.1.5.6.1.21 |
The local Data Link Correlator for this DLSw circuit |
| wfDlsConnectionKilled | .1.3.6.1.4.1.18.3.5.1.5.6.1.22 |
Set to Dead to delete a connection |
| wfDlsConnectionRemoteDLCorr | .1.3.6.1.4.1.18.3.5.1.5.6.1.23 |
The remote Data Link Correlator for this DLSw circuit |
| wfDlsNbName | .1.3.6.1.4.1.18.3.5.1.5.7.1.1 |
The NetBIOS name of the remote station. Names that are shorter than 16
characters are padded with ASCII spaces (0x20) |
| wfDlsNbPeerIpAddr | .1.3.6.1.4.1.18.3.5.1.5.7.1.2 |
The IP address of the DLSw peer for this NetBIOS name |
| wfDlsNbCapablePeerIpAddr | .1.3.6.1.4.1.18.3.5.1.5.7.1.3 |
The IP address of the DLSw peer for a capable NetBIOS name |
| wfDlsNbQueries | .1.3.6.1.4.1.18.3.5.1.5.7.1.4 |
The number of NETBIOS_NQ queries sent for this name |
| wfDlsMacAddr | .1.3.6.1.4.1.18.3.5.1.5.8.1.1 |
The MAC address of the remote station |
| wfDlsMacPeerIpAddr | .1.3.6.1.4.1.18.3.5.1.5.8.1.2 |
The IP address of the DLSw peer for this MAC address |
| wfDlsMacCapablePeerIpAddr | .1.3.6.1.4.1.18.3.5.1.5.8.1.3 |
The IP address of the DLSw peer for a capable MAC address |
| wfDlsMacQueries | .1.3.6.1.4.1.18.3.5.1.5.8.1.4 |
The number of CANUREACH queries sent for this name |
| wfDlsTrafficFilterCircuit | .1.3.6.1.4.1.18.3.5.1.5.9.1.7 |
The ID of the Bridge Circuit to which the filter is applied |
| wfDlsTrafficFilterRuleNumber | .1.3.6.1.4.1.18.3.5.1.5.9.1.8 |
ID for the rule |
| wfDlsTrafficFilterFragment | .1.3.6.1.4.1.18.3.5.1.5.9.1.9 |
Fragment number - for large rules |
| wfDlsTrafficFilterCreate | .1.3.6.1.4.1.18.3.5.1.5.9.1.1 |
Defines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted |
| wfDlsTrafficFilterEnable | .1.3.6.1.4.1.18.3.5.1.5.9.1.2 |
Defines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule |
| wfDlsTrafficFilterStatus | .1.3.6.1.4.1.18.3.5.1.5.9.1.3 |
Defines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule |
| wfDlsTrafficFilterCounter | .1.3.6.1.4.1.18.3.5.1.5.9.1.4 |
The number of received packets that have matched this rule |
| wfDlsTrafficFilterDefinition | .1.3.6.1.4.1.18.3.5.1.5.9.1.5 |
The filter rule definition |
| wfDlsTrafficFilterReserved | .1.3.6.1.4.1.18.3.5.1.5.9.1.6 |
Reserved field |
| wfDlsTrafficFilterName | .1.3.6.1.4.1.18.3.5.1.5.9.1.10 |
name of the rule number |
| wfDlsDefaultMacAddr | .1.3.6.1.4.1.18.3.5.1.5.10.1.2 |
The MAC address of the destination station |
| wfDlsDefaultMacDelete | .1.3.6.1.4.1.18.3.5.1.5.10.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw Default MAC
record |
| wfDlsDefaultMacPeerIp | .1.3.6.1.4.1.18.3.5.1.5.10.1.3 |
The peer IP address to use for this MAC address |
| wfDlsDefaultNbName | .1.3.6.1.4.1.18.3.5.1.5.11.1.2 |
The NetBIOS name of the destination station |
| wfDlsDefaultNbDelete | .1.3.6.1.4.1.18.3.5.1.5.11.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw Default NetBIOS
record |
| wfDlsDefaultNbPeerIp | .1.3.6.1.4.1.18.3.5.1.5.11.1.3 |
The peer IP address to use for this NetBIOS name |
| wfDlsLocalDeviceCct | .1.3.6.1.4.1.18.3.5.1.5.12.1.4 |
The circuit on which this device is configured. Valid range (1-1023) |
| wfDlsLocalDeviceAddr | .1.3.6.1.4.1.18.3.5.1.5.12.1.5 |
The physical address for this device. Valid range is based on media |
| wfDlsLocalDeviceDelete | .1.3.6.1.4.1.18.3.5.1.5.12.1.1 |
Create/Delete parameter. Default is created. Users perform an SNMP SET
operation on this object in order to create/delete a DLSw Local Device |
| wfDlsLocalDeviceDisable | .1.3.6.1.4.1.18.3.5.1.5.12.1.2 |
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET
operation on this object in order to enable/disable a DLSw Local Device |
| wfDlsLocalDeviceState | .1.3.6.1.4.1.18.3.5.1.5.12.1.3 |
The current state of DLSw |
| wfDlsLocalDeviceSourceMac | .1.3.6.1.4.1.18.3.5.1.5.12.1.6 |
The source MAC address of an emulated Token Ring end station for this
device. Values are standard MSB Token Ring MAC addresses |
| wfDlsLocalDeviceSourceSap | .1.3.6.1.4.1.18.3.5.1.5.12.1.7 |
The source SAP of an emulated Token Ring end station for this device.
Values are standard SNA SAPs |
| wfDlsLocalDeviceDestMac | .1.3.6.1.4.1.18.3.5.1.5.12.1.8 |
The destination MAC address for this device. Values are standard MSB Token
Ring MAC addresses |
| wfDlsLocalDeviceDestSap | .1.3.6.1.4.1.18.3.5.1.5.12.1.9 |
The destination SAP for this device. Values are standard SNA SAPs |
| wfDlsLocalDeviceXidValue | .1.3.6.1.4.1.18.3.5.1.5.12.1.10 |
The station XID value. Value must match the IDBLK and IDNUM on the host |
| wfDlsLocalDeviceCanureachTimer | .1.3.6.1.4.1.18.3.5.1.5.12.1.11 |
The time interval in seconds that a canureach is sent to the remote DLS
peer to establish a session. A minimum value of 1 means that a canureach
will be transmitted once a second, a maximum value of 3600 means that a
canureach will be transmitted once an hour, and a value of 0 means that
no canureach will be transmitted |
| wfDlsLocalDeviceCanureachRetries | .1.3.6.1.4.1.18.3.5.1.5.12.1.12 |
The maximum number of times a canureach is sent to the remote DLS peer to
establish a session. A minimum value of 0 means that no canureach messages
will be transmitted, a maximum value of 0xFFFFFFFF means that an infinite
number of canureach messages will be transmitted for this connection.
The default is set to 10 |
| wfDlsLocalDeviceLSTimer | .1.3.6.1.4.1.18.3.5.1.5.12.1.13 |
The time interval in seconds that a connect request is sent to the local
SDLC device to establish a session. A minimum value of 1 means that a
connect request will be sent once a second, a maximum value of 3600 means
that a connect request will be sent once an hour, and a value of 0 means
that no connect requests will be sent |
| wfDlsLocalDeviceLSRetries | .1.3.6.1.4.1.18.3.5.1.5.12.1.14 |
The maximum number of times a connect request is sent to the local SDLC
device to establish a session. A minimum value of 0 means that no connect
requests will be sent, a maximum value of 0xFFFFFFFF means that an infinite
number of connect requests will be sent for this connection.
The default is set to 10 |
| wfDlsLocalDeviceRcvCredit | .1.3.6.1.4.1.18.3.5.1.5.12.1.15 |
Receive credit count. Maximum number of frames SDLC is allowed to send to
DLS. A minimum value of 1 means that DLS will only accept up to 1 frame
from SDLC before it updates SDLCs credit. A value of 0 means that DLS
can receive an infinite number of frames from SDLC without the need to
update SDLC's credit |
| wfDlsLocalDeviceTxCredit | .1.3.6.1.4.1.18.3.5.1.5.12.1.16 |
Transmit credit count. Maximum number of frames DLS is allowed to send to
SDLC. A minimum value of 1 means that DLS can only send one frame to SDLC
until it receives credit update from SDLC. A value of 0 means that DLS can
send an infinite number of frames to SDLC without the need to update SDLC's
credit |
| wfDlsLocalDeviceCurTimer2 | .1.3.6.1.4.1.18.3.5.1.5.12.1.17 |
The time interval in seconds that a canureach is sent to the remote DLS
peer to establish a session. A minimum value of 1 means that a canureach
will be transmitted once a second, a maximum value means that a
canureach will be transmitted once every timer2 seconds, and a value
of 0 means that no canureach will be transmitted |
| wfDlsLocalDeviceCurRetries2 | .1.3.6.1.4.1.18.3.5.1.5.12.1.18 |
The maximum number of times a canureach is sent to the remote DLS peer to
establish a session. A minimum value of 0 means that no canureach messages
will be transmitted, a maximum value of 0xFFFFFFFF means that an infinite
number of canureach messages will be transmitted for this connection.
The default is set to infinite: 4294967295 = 0xFFFFFFFF |
| wfDlsLocalDeviceEnableXidPassthru | .1.3.6.1.4.1.18.3.5.1.5.12.1.19 |
XID passthru Enable/Disable parameter. Default is enabled.
Used for pu2.1 circuits to allow the XID to be passed thru to SDLC
when host is connected to token ring and remote is SDLC. |
| wfDlsLocalDeviceActivationSequence | .1.3.6.1.4.1.18.3.5.1.5.12.1.20 |
Sequence of activation for SDLC PU2.0 fixed format
primary devices. LocalDeviceFirst specifies that DLS
establishes a connection with the SDLC End Station first.
Once the Local Device successfully responds, DLS then starts
up the SSP connection to the peer.
PeerFirst specifies that DLS starts the SSP connection
first, and contacts the SDLC End Station only
after receiving a CONTACT message from the peer. |
| wfDlsLocalCircuitCct | .1.3.6.1.4.1.18.3.5.1.5.13.1.4 |
Local Circuit ID |
| wfDlsLocalCircuitDelete | .1.3.6.1.4.1.18.3.5.1.5.13.1.1 |
Create/Delete parameter |
| wfDlsLocalCircuitDisable | .1.3.6.1.4.1.18.3.5.1.5.13.1.2 |
Disable parameter |
| wfDlsLocalCircuitState | .1.3.6.1.4.1.18.3.5.1.5.13.1.3 |
Circuit state |
| wfDlsLocalCircuitClientCount | .1.3.6.1.4.1.18.3.5.1.5.13.1.5 |
Number of clients registerd |
| wfDlsLocalCircuitFrameCount | .1.3.6.1.4.1.18.3.5.1.5.13.1.6 |
Total number of frames passed |
| wfDlsLocalCircuitSlot | .1.3.6.1.4.1.18.3.5.1.5.13.1.7 |
Slot on which this cct resides |
| wfDlsLocalCctDefaultMac | .1.3.6.1.4.1.18.3.5.1.5.13.1.8 |
Default Mac address associated with this circuit |
| wfDlsGenDelete | .1.3.6.1.4.1.18.3.5.1.5.14.1.1 |
Create/Delete parameter. Default is created. |
| wfDlsGenDisable | .1.3.6.1.4.1.18.3.5.1.5.14.1.2 |
Enable/Disable parameter. Default is disabled. Users perform an
SNMP SET
operation on this object in order to enable/disable DLSw Generat
or
|
| wfDlsGenDefaultSessions | .1.3.6.1.4.1.18.3.5.1.5.14.1.3 |
Number of DLSw Generator Sessions to be brought up if
specific numbers are not configured per slot. |
| wfDlsGenStartupTime | .1.3.6.1.4.1.18.3.5.1.5.14.1.4 |
Time between connection setup requests in
milliseconds. |
| wfDlsGenIFramePerSec | .1.3.6.1.4.1.18.3.5.1.5.14.1.5 |
Number of I frames to be sent per second. |
| wfDlsGenMacAddrOffset | .1.3.6.1.4.1.18.3.5.1.5.14.1.6 |
Offset for MAC addresses to be created for GEN. |
| wfDlsGenVariableDstMAC | .1.3.6.1.4.1.18.3.5.1.5.14.1.7 |
Allows varying destination MAC address. |
| wfDlsGenDefaultUpperMAC | .1.3.6.1.4.1.18.3.5.1.5.14.1.8 |
Allows varying upper MAC address. |
| wfDlsGenDataLength | .1.3.6.1.4.1.18.3.5.1.5.14.1.9 |
Gen data frame size |
| wfDlsGenNumSapPerMac | .1.3.6.1.4.1.18.3.5.1.5.14.1.10 |
Gen number of saps for each mac |
| wfDlsGenSapIncrement | .1.3.6.1.4.1.18.3.5.1.5.14.1.11 |
Gen sap incremental value |
| wfDlsMcastIpAddr | .1.3.6.1.4.1.18.3.5.1.5.15.1.3 |
The Multicast IP address of this entry |
| wfDlsMcastIpDelete | .1.3.6.1.4.1.18.3.5.1.5.15.1.1 |
Create/Delete parameter. Default is created. Users perform an
SNMP SET operation on this object in order to create/delete a
DLSw multicast IP record |
| wfDlsMcastIpState | .1.3.6.1.4.1.18.3.5.1.5.15.1.2 |
The current state of this DLSw McastIpEntry. Active indicates
that it is possible to accept or sent CURs to/from the multicast
IP group address specified in this entry. Inactive indicates that
DLSw in not a member of this multicast IP group. The initial
state is notpresent and this state will be maintained until this
mib record has been read. |
| wfDlsMcastIpSlots | .1.3.6.1.4.1.18.3.5.1.5.15.1.4 |
Bit mask field representing the slots upon which this
DlsMcastIpEntry can receive and transmit multicast data.
The MSBit represents slot 1, the next most significant
bit represents slot 2, and so on... Slots can be 1-14.
Default is all slots on a BCN. |
| wfDlsMcastIpBackupConfig | .1.3.6.1.4.1.18.3.5.1.5.15.1.5 |
The indication of whether or not a backup peer
is to be configured for the primary peer. The
default is no which means that there is no backup
peer configured by default. |
| wfDlsMcastIpBackupIpAddr | .1.3.6.1.4.1.18.3.5.1.5.15.1.6 |
The IP Address of the backup DLSw peer. |
| wfDlsMcastIpBackupMaxUpTime | .1.3.6.1.4.1.18.3.5.1.5.15.1.7 |
The maximum amount of time (in seconds) allowed for a
TCP connection to stay established to the backup DLSw
peer. If set to zero, this feature is disabled. Set
to anything greater than zero to enable the feature. |
| wfDlsMcastIpBackupHoldDownTime | .1.3.6.1.4.1.18.3.5.1.5.15.1.8 |
The amount of time (in seconds) to wait before starting
a new TCP connection to the backup DLSw peer. |
| wfDlsMcastIpBackupStartTime | .1.3.6.1.4.1.18.3.5.1.5.15.1.9 |
Used in conjunction with the EndTime attribute. Together
these define a time interval for when a backup peer can
be active. The start time is the beginning time of day
that a backup peer can be established. (HHMM format) |
| wfDlsMcastIpBackupEndTime | .1.3.6.1.4.1.18.3.5.1.5.15.1.10 |
Used in conjunction with the StartTime attribute. Together
these define a time interval for when a backup peer can
be active. The end time is the end time of day that a
backup peer can be established. If a backup peer is active
and the current time is after this end time, the backup
peer will be brought down. (HHMM format) |
| wfDlsMcastIpBackupType | .1.3.6.1.4.1.18.3.5.1.5.15.1.11 |
The type of this DLSw backup peer |
| Table |
| wfDlsInterfaceTable | .1.3.6.1.4.1.18.3.5.1.5.2 |
A table that contains information about every interface that is associated
with DLSw inst_id[1] = wfDlsInterfaceCircuit |
| wfDlsSlotTable | .1.3.6.1.4.1.18.3.5.1.5.3 |
A table that contains the IP interfaces each slot must use for the TCP
connections to non-Wellfleet switches. The IP interface may exist anywhere
on the box. inst_id[1] = wfDlsSlotNumber |
| wfDlsSapTable | .1.3.6.1.4.1.18.3.5.1.5.4 |
A table that contains the SAPS to be terminated by DLSw.
inst_id[1] = wfDlsSapAddr |
| wfDlsPeerTable | .1.3.6.1.4.1.18.3.5.1.5.5 |
A table that contains the IP addresses of the DLSw peers with which we will
establish TCP connections. inst_id[4] = wfDlsPeerAddr |
| wfDlsConnectionTable | .1.3.6.1.4.1.18.3.5.1.5.6 |
A table that contains the information about the current DLSw connections in
progress.
inst_id[15] = wfDlsConnectionCct wfDlsConnectionSrcMac wfDlsConnectionDstMac
wfDlsConnectionSaps |
| wfDlsNbTable | .1.3.6.1.4.1.18.3.5.1.5.7 |
The DLSw NetBIOS name cache table. inst_id[16] = wfDlsNbName |
| wfDlsMacTable | .1.3.6.1.4.1.18.3.5.1.5.8 |
The DLSw MAC address cache table. inst_id[6] = wfDlsMacAddr |
| wfDlsTrafficFilterTable | .1.3.6.1.4.1.18.3.5.1.5.9 |
DLSw Traffic Filters |
| wfDlsDefaultMacTable | .1.3.6.1.4.1.18.3.5.1.5.10 |
A table that contains DLSw Peer IP addresses for statically defined remote
MAC addresses. The IP address in this table will always be used for
CANUREACH messages to the remote MAC address.
inst_id[6] = wfDlsDefaultMacAddr |
| wfDlsDefaultNbTable | .1.3.6.1.4.1.18.3.5.1.5.11 |
A table that contains DLSw Peer IP addresses for statically defined remote
NetBIOS names. The IP address in this table will always be used for
CANUREACH messages to the remote NetBIOS name.
inst_id[16] = wfDlsDefaultNbName |
| wfDlsLocalDeviceTable | .1.3.6.1.4.1.18.3.5.1.5.12 |
The configuration table for devices locally terminated through DLSw |
| wfDlsLocalCircuitTable | .1.3.6.1.4.1.18.3.5.1.5.13 |
communicate with each other via a virtual circuit gate |
| wfDlsGenToolTable | .1.3.6.1.4.1.18.3.5.1.5.14 |
A table that contains the Gen Tool characteristics to be used
on Bay Network Routers. inst_id[1] = wfDlsSlotNumber |
| wfDlsMcastIpTable | .1.3.6.1.4.1.18.3.5.1.5.15 |
A table that contains the Multicast IP addresses that
will be used by DLSw ro send and receive explorer traffic. |
| Object Identifier |
| wfDls | .1.3.6.1.4.1.18.3.5.1.5.1 |