| Scalar Object |
| wfIpAcctBaseCreate | .1.3.6.1.4.1.18.3.5.20.1.1.1 |
Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete IP_ACCT. |
| wfIpAcctBaseEnable | .1.3.6.1.4.1.18.3.5.20.1.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform a set operation on this
object in order to enable/disable IP_ACCT. |
| wfIpAcctBaseThreshold | .1.3.6.1.4.1.18.3.5.20.1.1.3 |
The max number of entries in the IP accounting table |
| wfIpAcctBaseTransitCount | .1.3.6.1.4.1.18.3.5.20.1.1.4 |
Number of transit entries to be accounted for that do not
match the access-list src-dest pairs |
| wfIpAcctBaseTrapPercent | .1.3.6.1.4.1.18.3.5.20.1.1.5 |
When this % of table entries are counted a trap is sent to
the TI console |
| wfIpAcctAge | .1.3.6.1.4.1.18.3.5.20.1.1.6 |
Number of ticks (seconds) since the 1st entry in the accounting table |
| wfIpCkAcctFlag | .1.3.6.1.4.1.18.3.5.20.1.1.7 |
This is set when user wants to make a snapshot of the active
table into the checkpoint table |
| wfIpCkAcctAge | .1.3.6.1.4.1.18.3.5.20.1.1.8 |
Number of clock ticks since the first entry in the
checkpoint accounting table |
| wfIpAcctTableEntry | .1.3.6.1.4.1.18.3.5.20.1.2.1 |
A src-dest based entry in the table |
| wfIpAcctCctTableEntry | .1.3.6.1.4.1.18.3.5.20.1.3.1 |
An IP accounting circuit definition |
| wfIpCkAcctTableEntry | .1.3.6.1.4.1.18.3.5.20.1.4.1 |
A src-dest based entry in the checkpoint table |
| Tabular Object |
| wfIpAcctTableSrcAddr | .1.3.6.1.4.1.18.3.5.20.1.2.1.1 |
Source IP address of Packet |
| wfIpAcctTableDestAddr | .1.3.6.1.4.1.18.3.5.20.1.2.1.2 |
Dest IP address of Packet |
| wfIpAcctTablePkts | .1.3.6.1.4.1.18.3.5.20.1.2.1.3 |
Number of pkts with this src-dest address pair |
| wfIpAcctTableBytes | .1.3.6.1.4.1.18.3.5.20.1.2.1.4 |
Number of bytes with this src-dest address pair |
| wfIpAcctCctNum | .1.3.6.1.4.1.18.3.5.20.1.3.1.3 |
The Circuit Number that this interface runs over |
| wfIpAcctCctDelete | .1.3.6.1.4.1.18.3.5.20.1.3.1.1 |
Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete an IP accounting interface. |
| wfIpAcctCctDisable | .1.3.6.1.4.1.18.3.5.20.1.3.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform a set operation on this
object in order to enable/disable an IP accounting on an interface. |
| wfIpCkAcctTableSrcAddr | .1.3.6.1.4.1.18.3.5.20.1.4.1.1 |
Source IP address of Packet in checkpoint table |
| wfIpCkAcctTableDestAddr | .1.3.6.1.4.1.18.3.5.20.1.4.1.2 |
Dest IP address of Packet in checkpoint table |
| wfIpCkAcctTablePkts | .1.3.6.1.4.1.18.3.5.20.1.4.1.3 |
Number of pkts with this src-dest address pair in checkpoint table |
| wfIpCkAcctTableBytes | .1.3.6.1.4.1.18.3.5.20.1.4.1.4 |
Number of bytes with this src-dest address pair in checkpoint table |
| Table |
| wfIpAcctTable | .1.3.6.1.4.1.18.3.5.20.1.2 |
A list of elements in the IP accounting table |
| wfIpAcctCctTable | .1.3.6.1.4.1.18.3.5.20.1.3 |
List of interfaces - circuits configured with IP accounting |
| wfIpCkAcctTable | .1.3.6.1.4.1.18.3.5.20.1.4 |
A list of elements in the IP checkpoint accounting table |
| Object Identifier |
| wfIpAcctGroup | .1.3.6.1.4.1.18.3.5.20.1 |
| wfIpAcctBase | .1.3.6.1.4.1.18.3.5.20.1.1 |