| Scalar Object |
| wfIpxBaseDelete | .1.3.6.1.4.1.18.3.5.5.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete IPX. |
| wfIpxBaseDisable | .1.3.6.1.4.1.18.3.5.5.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable IPX. |
| wfIpxBaseState | .1.3.6.1.4.1.18.3.5.5.1.3 |
The current state of the entire IPX. |
| wfIpxBaseCfgHostNumber | .1.3.6.1.4.1.18.3.5.5.1.4 |
Host Number of Router and potential MAC address of box.
This host number will be used to overide the default
box generated hostnumber. |
| wfIpxBaseActiveHostNumber | .1.3.6.1.4.1.18.3.5.5.1.5 |
Host Number of Router and potential MAC address of box.
This is not a restart variable because this will be
filled in from the IPX code after reading it from
either the configurable host number or from a box
generated variable. |
| wfIpxBaseNetCount | .1.3.6.1.4.1.18.3.5.5.1.6 |
Count the total number of nets in the box. |
| wfIpxBaseServiceCount | .1.3.6.1.4.1.18.3.5.5.1.7 |
Count the total number of saps in the box. |
| wfIpxBaseLogFilter | .1.3.6.1.4.1.18.3.5.5.1.8 |
Filter out some log messages, Default filters out
debugs, info, and trace messages. |
| wfIpxBaseNetTblSize | .1.3.6.1.4.1.18.3.5.5.1.9 |
Tell me how much space to set aside when creating the
forwarding and network tables. |
| wfIpxBaseRouterName | .1.3.6.1.4.1.18.3.5.5.1.10 |
The Name of the Router, used for IPXWAN |
| wfIpxBasePrimaryNetNumber | .1.3.6.1.4.1.18.3.5.5.1.11 |
The 'interfernal' network number, used for IPXWAN |
| wfIpxBaseRipMethod | .1.3.6.1.4.1.18.3.5.5.1.12 |
Choose either Metric/Hops based or Tick based routing |
| wfIpxBaseMaximumPath | .1.3.6.1.4.1.18.3.5.5.1.13 |
Declare Maximum number equal costs paths allowed for a given destination network |
| wfIpxBaseHostCount | .1.3.6.1.4.1.18.3.5.5.1.14 |
Count the total number of hosts in the box. |
| wfIpxBaseMultipleHostAddrs | .1.3.6.1.4.1.18.3.5.5.1.15 |
Allow the user to configure one host/mac addr for the whole box (default)
where, if configured, the CfgHostNumber is used (becomes ActiveHostNubmer)
otherwise if left unconfigured the ActiveHostNumber is discerned from the
backplane serial number. If Multiple host is Enabled and the host number is
configured in the interface record the configured value is used as the
hostid/mac addr of the interface (except Token Ring which can't go into
promiscous mode, uses Token Ring Mac as hostid/mac of interface). If the
host number in left unconfigured then the hostid/mac is gotten from the
mac of the circuit. |
| wfIpxBaseNovellCertificationConformance | .1.3.6.1.4.1.18.3.5.5.1.16 |
enable/disable novell certification, disable/enable wellfleet specifics |
| wfIpxBaseTrigUpdateEn | .1.3.6.1.4.1.18.3.5.5.1.17 |
enable/disable triggered rip updates for Goldman Sax |
| wfIpxBaseNetSizeBoundEn | .1.3.6.1.4.1.18.3.5.5.1.18 |
enable/disable maximum allowed size of the network table |
| wfIpxBaseMaxNetTblSize | .1.3.6.1.4.1.18.3.5.5.1.19 |
maximum allowed size of the network table |
| wfIpxBaseNetTblFillNotify | .1.3.6.1.4.1.18.3.5.5.1.20 |
notify when (configured) percentage is reached |
| wfIpxBaseRtEntry | .1.3.6.1.4.1.18.3.5.5.2.1 |
An entry in the Routing Table |
| wfIpxBaseRt2Entry | .1.3.6.1.4.1.18.3.5.5.13.1 |
An entry in the Routing Table |
| wfIpxBaseSapEntry | .1.3.6.1.4.1.18.3.5.5.3.1 |
An entry in the Routing Table |
| wfIpxInterfaceEntry | .1.3.6.1.4.1.18.3.5.5.4.1 |
An entry in the Routing Table |
| wfIpxRipIntfEntry | .1.3.6.1.4.1.18.3.5.5.5.1 |
An entry in the Routing Table |
| wfIpxAdjacentHostEntry | .1.3.6.1.4.1.18.3.5.5.6.1 |
An entry in the Adjacent Host Table |
| wfIpxStaticRouteEntry | .1.3.6.1.4.1.18.3.5.5.7.1 |
An entry in the Routing Table |
| wfIpxNetBiosStaticRouteEntry | .1.3.6.1.4.1.18.3.5.5.8.1 |
An entry in the Routing Table |
| wfIpxStaticSapEntry | .1.3.6.1.4.1.18.3.5.5.12.1 |
An entry in the Routing Table |
| wfIpxSapNetLvlFilter | .1.3.6.1.4.1.18.3.5.5.9.1 |
An entry in the Filter Table |
| wfIpxSapServLvlFilter | .1.3.6.1.4.1.18.3.5.5.10.1 |
An entry in the Filter Table |
| wfIpxTrafficFilterEntry | .1.3.6.1.4.1.18.3.5.5.11.1 |
A traffic filter definition |
| wfIpxAggrInDatagrams | .1.3.6.1.4.1.18.3.5.5.14.1 |
The total number of datagrams received |
| wfIpxAggrOutDatagrams | .1.3.6.1.4.1.18.3.5.5.14.2 |
The total number of datagrams sent (includes datagrams
forwarded) |
| wfIpxAggrFwdDatagrams | .1.3.6.1.4.1.18.3.5.5.14.3 |
The total number of datagrams forwarded |
| wfIpxAggrInDiscards | .1.3.6.1.4.1.18.3.5.5.14.4 |
The total number of datagrams queued for reception that
were discarded for resource reasons |
| wfIpxAggrInHdrErrs | .1.3.6.1.4.1.18.3.5.5.14.5 |
The total number of datagrams discarded because of errors
in the IPX header. |
| wfIpxAggrInAddrErrs | .1.3.6.1.4.1.18.3.5.5.14.6 |
The total nmber of datagrams received whose destination
address was invalid for this entity. |
| wfIpxAggrInUnknownProtos | .1.3.6.1.4.1.18.3.5.5.14.7 |
The total number of datagrams received locally which
specified an unknown or unsupported protocol. |
| wfIpxAggrOutDiscards | .1.3.6.1.4.1.18.3.5.5.14.8 |
The total number of datagrams queued for transmission
that were discarded for resource reasons. |
| wfIpxAggrOutNoRoutes | .1.3.6.1.4.1.18.3.5.5.14.9 |
The total number of datagrams queued for transmission thet
were discarded because the destination was unreachable. |
| Tabular Object |
| wfIpxBaseRouteDest | .1.3.6.1.4.1.18.3.5.5.2.1.1 |
Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use. |
| wfIpxBaseRouteIfIndex | .1.3.6.1.4.1.18.3.5.5.2.1.2 |
The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex. |
| wfIpxBaseRouteMetric | .1.3.6.1.4.1.18.3.5.5.2.1.3 |
The primary routing metric for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1. |
| wfIpxBaseRouteNextHopNetwork | .1.3.6.1.4.1.18.3.5.5.2.1.4 |
In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IPX address on that
interface. |
| wfIpxBaseRouteNextHopHost | .1.3.6.1.4.1.18.3.5.5.2.1.5 |
Full network.host_id address of nexthop host for
this network. |
| wfIpxBaseRouteType | .1.3.6.1.4.1.18.3.5.5.2.1.6 |
The type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IPX
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
nagement stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object. |
| wfIpxBaseRouteProto | .1.3.6.1.4.1.18.3.5.5.2.1.7 |
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols. |
| wfIpxBaseRouteAge | .1.3.6.1.4.1.18.3.5.5.2.1.8 |
The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned. |
| wfIpxBaseRouteInfo | .1.3.6.1.4.1.18.3.5.5.2.1.9 |
A user-defined string which describes this Route entry |
| wfIpxBaseRoute2Proto | .1.3.6.1.4.1.18.3.5.5.13.1.8 |
The routing mechanism via which this route was
learned. Inclusion of values for gateway routing
protocols is not intended to imply that hosts
should support those protocols. |
| wfIpxBaseRoute2Dest | .1.3.6.1.4.1.18.3.5.5.13.1.1 |
Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use. |
| wfIpxBaseRoute2NextHopNetwork | .1.3.6.1.4.1.18.3.5.5.13.1.5 |
In the case of a route bound to an interface
which is realized via a broadcast media, the value
of this field is the agent's IPX address on that
interface. |
| wfIpxBaseRoute2NextHopHost | .1.3.6.1.4.1.18.3.5.5.13.1.6 |
Full network.host_id address of nexthop host for
this network. |
| wfIpxBaseRoute2IfIndex | .1.3.6.1.4.1.18.3.5.5.13.1.2 |
The index value which uniquely identifies the
local interface through which the next hop of this
route should be reached. The interface identified
by a particular value of this index is the same
interface as identified by the same value of
ifIndex. |
| wfIpxBaseRoute2Ticks | .1.3.6.1.4.1.18.3.5.5.13.1.3 |
The primary routing metric (in ticks) for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1. |
| wfIpxBaseRoute2Hops | .1.3.6.1.4.1.18.3.5.5.13.1.4 |
The primary routing metric (in hops) for this route. The
semantics of this metric are determined by the
routing-protocol specified in the route's
ipRouteProto value. If this metric is not used,
its value should be set to -1. |
| wfIpxBaseRoute2Type | .1.3.6.1.4.1.18.3.5.5.13.1.7 |
The type of route. Note that the values
direct(3) and indirect(4) refer to the notion of
direct and indirect routing in the IPX
architecture.
Setting this object to the value invalid(2) has
the effect of invalidating the corresponding entry
in the ipRouteTable object. That is, it
effectively dissasociates the destination
identified with said entry from the route
identified with said entry. It is an
implementation-specific matter as to whether the
agent removes an invalidated entry from the table.
nagement stations must be prepared
to receive tabular information from agents that
corresponds to entries not currently in use.
Proper interpretation of such entries requires
examination of the relevant ipRouteType object. |
| wfIpxBaseRoute2Age | .1.3.6.1.4.1.18.3.5.5.13.1.9 |
The number of seconds since this route was last
updated or otherwise determined to be correct.
Note that no semantics of `too old' can be implied
except through knowledge of the routing protocol
by which the route was learned. |
| wfIpxBaseRoute2Info | .1.3.6.1.4.1.18.3.5.5.13.1.10 |
A user-defined string which describes this Route entry |
| wfIpxBaseSapIndex | .1.3.6.1.4.1.18.3.5.5.3.1.8 |
Index string comprised of type.network.hostid.socket
used to uniquely index this server. |
| wfIpxBaseSapType | .1.3.6.1.4.1.18.3.5.5.3.1.1 |
Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use. |
| wfIpxBaseSapNetwork | .1.3.6.1.4.1.18.3.5.5.3.1.2 |
The network address of this service. |
| wfIpxBaseSapHost | .1.3.6.1.4.1.18.3.5.5.3.1.3 |
The host address for this service. |
| wfIpxBaseSapSocket | .1.3.6.1.4.1.18.3.5.5.3.1.4 |
The socket for this particular service |
| wfIpxBaseSapName | .1.3.6.1.4.1.18.3.5.5.3.1.5 |
The server name. |
| wfIpxBaseSapAge | .1.3.6.1.4.1.18.3.5.5.3.1.6 |
The number of seconds since SAP entry has been updated. |
| wfIpxBaseSapHops | .1.3.6.1.4.1.18.3.5.5.3.1.7 |
The number of Hops away service is from router. |
| wfIpxBaseSapIntf | .1.3.6.1.4.1.18.3.5.5.3.1.9 |
Network Address of Nexthop Interface. |
| wfIpxInterfaceNetworkNumber | .1.3.6.1.4.1.18.3.5.5.4.1.6 |
The IPX Address to which this entry's
addressing information pertains |
| wfIpxInterfaceCircuit | .1.3.6.1.4.1.18.3.5.5.4.1.5 |
The Circuit Number that this interface runs over |
| wfIpxInterfaceIndex | .1.3.6.1.4.1.18.3.5.5.4.1.1 |
A unique value for each IPX interface. Its value
ranges between 1 and the value of MAXCIRCUITS. |
| wfIpxInterfaceDelete | .1.3.6.1.4.1.18.3.5.5.4.1.2 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an IPX interface. |
| wfIpxInterfaceDisable | .1.3.6.1.4.1.18.3.5.5.4.1.3 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an IPX interface. |
| wfIpxInterfaceState | .1.3.6.1.4.1.18.3.5.5.4.1.4 |
The current state of the IPX interface |
| wfIpxInterfaceCost | .1.3.6.1.4.1.18.3.5.5.4.1.7 |
The Cost associated with the IPX Address of this entry |
| wfIpxInterfaceXsumOn | .1.3.6.1.4.1.18.3.5.5.4.1.8 |
Flag for checksums |
| wfIpxInterfaceCfgEncaps | .1.3.6.1.4.1.18.3.5.5.4.1.9 |
The encapsulation method associated with this interface
chosen by the user but not necessarily the one used.
(See wfIpxInterfaceEncaps) |
| wfIpxInterfaceMacAddress | .1.3.6.1.4.1.18.3.5.5.4.1.10 |
The MacAddress of this interface
this port will receive or transmit. |
| wfIpxInterfaceSMDSGroupAddress | .1.3.6.1.4.1.18.3.5.5.4.1.11 |
The SMDS group address |
| wfIpxInterfaceMaxInfo | .1.3.6.1.4.1.18.3.5.5.4.1.12 |
The maximum size of the INFO (non-MAC) field
that this port will receive or transmit. |
| wfIpxInterfaceInReceives | .1.3.6.1.4.1.18.3.5.5.4.1.13 |
The total number of input datagrams received from
interfaces, including those received in error. |
| wfIpxInterfaceInHdrErrors | .1.3.6.1.4.1.18.3.5.5.4.1.14 |
The number of input datagrams discarded due to
errors in their IPX headers, including bad
checksums, version number mismatch, other format
errors, time-to-live exceeded, errors discovered
in processing their IPX options, etc. |
| wfIpxInterfaceInAddrErrors | .1.3.6.1.4.1.18.3.5.5.4.1.15 |
The number of input datagrams discarded because
the IPX address in their IPX header's destination
field was not a valid address to be received at
this entity. |
| wfIpxInterfaceForwDatagrams | .1.3.6.1.4.1.18.3.5.5.4.1.16 |
The number of input datagrams for which this
entity was not their final IPX destination, as a
result of which an attempt was made to find a
route to forward them to that final destination.
In entities which do not act as IPX Gateways, this
counter will include only those packets which were
Source-Routed via this entity, and the Source-
Route option processing was successful. |
| wfIpxInterfaceInUnknownProtos | .1.3.6.1.4.1.18.3.5.5.4.1.17 |
The number of locally-addressed datagrams
received successfully but discarded because of an
unknown or unsupported protocol. |
| wfIpxInterfaceInDiscards | .1.3.6.1.4.1.18.3.5.5.4.1.18 |
The number of input IPX datagrams for which no
problems were encountered to prevent their
continued processing, but which were discarded
(e.g., for lack of buffer space). Note that this
counter does not include any datagrams discarded
while awaiting re-assembly. |
| wfIpxInterfaceInDelivers | .1.3.6.1.4.1.18.3.5.5.4.1.19 |
The total number of input datagrams successfully
delivered to IPX user-protocols. |
| wfIpxInterfaceOutRequests | .1.3.6.1.4.1.18.3.5.5.4.1.20 |
The total number of IPX datagrams which local IPX
user-protocols supplied to IPX in
requests for transmission. Note that this counter
does not include any datagrams counted in
ipxForwDatagrams. |
| wfIpxInterfaceOutDiscards | .1.3.6.1.4.1.18.3.5.5.4.1.21 |
The number of output IPX datagrams for which no
problem was encountered to prevent their
transmission to their destination, but which were
discarded (e.g., for lack of buffer space). Note
that this counter would include datagrams counted
in ipForwDatagrams if any such packets met this
(discretionary) discard criterion. |
| wfIpxInterfaceOutNoRoutes | .1.3.6.1.4.1.18.3.5.5.4.1.22 |
The number of IPX datagrams discarded because no
route could be found to transmit them to their
destination. Note that this counter includes any
packets counted in ipForwDatagrams which meet this
`no-route' criterion. Note that this includes any
datagarms which a host cannot route because all of
its default gateways are down. |
| wfIpxInterfaceTrEndStation | .1.3.6.1.4.1.18.3.5.5.4.1.23 |
Source Routing flag |
| wfIpxInterfaceNetbiosAccept | .1.3.6.1.4.1.18.3.5.5.4.1.24 |
Accept NetBios All Networks Broadcast Packets |
| wfIpxInterfaceNetbiosDeliver | .1.3.6.1.4.1.18.3.5.5.4.1.25 |
Deliver NetBios All Networks Broadcast Packets |
| wfIpxInterfaceWanSapPeriod | .1.3.6.1.4.1.18.3.5.5.4.1.26 |
Configurable timer for SAP updates over LAN-WAN |
| wfIpxInterfaceFRBcast | .1.3.6.1.4.1.18.3.5.5.4.1.27 |
Configurable Frame Relay broadcast address |
| wfIpxInterfaceFRMcast | .1.3.6.1.4.1.18.3.5.5.4.1.28 |
Configurable Frame Relay multicast address |
| wfIpxInterfaceEncaps | .1.3.6.1.4.1.18.3.5.5.4.1.29 |
The Active or final encapsulation method associated with
this interface as determined by the router's implementation
of encapsulation algorithms (rules, restrictions) based on media type. |
| wfIpxInterfaceSplit | .1.3.6.1.4.1.18.3.5.5.4.1.30 |
Enable or Disable Split Horizon algorithm for this interface
Comes into to play for non full-meshed WAN networks (Frame Relay) |
| wfIpxInterfaceCacheHit | .1.3.6.1.4.1.18.3.5.5.4.1.31 |
This counter was added for performance investigation under the same
category as the number of Nets and number SAP counters. THis counter
Will provide information that will determine the usefullness of caching. |
| wfIpxInterfaceIpxWanDisable | .1.3.6.1.4.1.18.3.5.5.4.1.32 |
Enable IPXWAN negotiations |
| wfIpxInterfaceIpxWanCommonNet | .1.3.6.1.4.1.18.3.5.5.4.1.33 |
Common network number for IPXWAN link |
| wfIpxInterfaceIpxWanTimeOut | .1.3.6.1.4.1.18.3.5.5.4.1.34 |
IPXWAN timer out period for negotiation |
| wfIpxInterfaceIpxWanLinkRetry | .1.3.6.1.4.1.18.3.5.5.4.1.35 |
IPXWAN number of times to retry negotiation |
| wfIpxInterfaceWanRipPeriod | .1.3.6.1.4.1.18.3.5.5.4.1.36 |
Configurable timer for routing updates LAN-WAN |
| wfIpxInterfaceCfgHostNumber | .1.3.6.1.4.1.18.3.5.5.4.1.37 |
Host Number and possible MAC address of interface.
This host number will be used to overide the default
cct generated hostnumber (if Multiple Host enabled).
This field is not valid/used if the IpxBaseMultipleHost is
not enabled, if the media is non-promiscuous (Token Ring)
or if the field length is not 6 bytes. |
| wfIpxInterfaceActiveHostNumber | .1.3.6.1.4.1.18.3.5.5.4.1.38 |
Host Number and possible MAC address of interface.
This field will always be filled in by the router and
lists the HostNumber of each Interface. |
| wfIpxRipInterfaceIndex | .1.3.6.1.4.1.18.3.5.5.5.1.4 |
The IPX interface to run RIP on (instance id ). |
| wfIpxRipInterfaceDelete | .1.3.6.1.4.1.18.3.5.5.5.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete an RIP Interface instance. |
| wfIpxRipInterfaceDisable | .1.3.6.1.4.1.18.3.5.5.5.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable an RIP instance. |
| wfIpxRipInterfaceState | .1.3.6.1.4.1.18.3.5.5.5.1.3 |
The current state of RIP on this interface. |
| wfIpxRipInterfaceSupply | .1.3.6.1.4.1.18.3.5.5.5.1.5 |
Transmit RIP packets. |
| wfIpxRipInterfaceListen | .1.3.6.1.4.1.18.3.5.5.5.1.6 |
Receive RIP packets. |
| wfIpxAhTargHostNetwork | .1.3.6.1.4.1.18.3.5.5.6.1.3 |
The network address of the static host. |
| wfIpxAhTargHostId | .1.3.6.1.4.1.18.3.5.5.6.1.4 |
The Address of this static host. |
| wfIpxAhDelete | .1.3.6.1.4.1.18.3.5.5.6.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX
Static Host. |
| wfIpxAhDisable | .1.3.6.1.4.1.18.3.5.5.6.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this IPX
Static Route. |
| wfIpxAhNextHopIntf | .1.3.6.1.4.1.18.3.5.5.6.1.5 |
The Next Hop Interface Network Address |
| wfIpxAhDlci | .1.3.6.1.4.1.18.3.5.5.6.1.6 |
The next Hop Host address |
| wfIpxSrTargNetwork | .1.3.6.1.4.1.18.3.5.5.7.1.3 |
The Address of this static route |
| wfIpxSrNextHopNetwork | .1.3.6.1.4.1.18.3.5.5.7.1.5 |
The Next Hop IPX Address |
| wfIpxSrDelete | .1.3.6.1.4.1.18.3.5.5.7.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX
Static Route. |
| wfIpxSrDisable | .1.3.6.1.4.1.18.3.5.5.7.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this IPX
Static Route. |
| wfIpxSrCost | .1.3.6.1.4.1.18.3.5.5.7.1.4 |
The Cost of this Static Route in Hops |
| wfIpxSrNextHopHost | .1.3.6.1.4.1.18.3.5.5.7.1.6 |
The next Hop Host address |
| wfIpxSrTargNetworkRt | .1.3.6.1.4.1.18.3.5.5.7.1.7 |
The Route Identifier Which numbered route this is to be |
| wfIpxSrTickCost | .1.3.6.1.4.1.18.3.5.5.7.1.8 |
The Cost of this Static Route in Ticks |
| wfIpxNetBiosSrTargNetwork | .1.3.6.1.4.1.18.3.5.5.8.1.3 |
The Address of this static route |
| wfIpxNetBiosSrIntf | .1.3.6.1.4.1.18.3.5.5.8.1.5 |
The Interface Identifier for this static entry |
| wfIpxNetBiosSrDelete | .1.3.6.1.4.1.18.3.5.5.8.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX NETBIOS
Static Route. |
| wfIpxNetBiosSrDisable | .1.3.6.1.4.1.18.3.5.5.8.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this IPX NETBIOS
Static Route. |
| wfIpxNetBiosSrName | .1.3.6.1.4.1.18.3.5.5.8.1.4 |
The Name of the Target Server |
| wfIpxNetBiosSrIndex | .1.3.6.1.4.1.18.3.5.5.8.1.6 |
The Entry Index Which identifies this is entry |
| wfIpxStaticSapIntf | .1.3.6.1.4.1.18.3.5.5.12.1.10 |
Network Address of Nexthop Interface. |
| wfIpxStaticSapCircuit | .1.3.6.1.4.1.18.3.5.5.12.1.11 |
Circuit of Nexthop Interface. |
| wfIpxStaticSapType | .1.3.6.1.4.1.18.3.5.5.12.1.3 |
Multiple routes to a single
destination can appear in the table, but access to
such multiple entries is dependent on the table-
access mechanisms defined by the network
management protocol in use. |
| wfIpxStaticSapNetwork | .1.3.6.1.4.1.18.3.5.5.12.1.4 |
The network address of this service. |
| wfIpxStaticSapSocket | .1.3.6.1.4.1.18.3.5.5.12.1.6 |
The socket for this particular service |
| wfIpxStaticSapDelete | .1.3.6.1.4.1.18.3.5.5.12.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX
Static SAP. |
| wfIpxStaticSapDisable | .1.3.6.1.4.1.18.3.5.5.12.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this IPX
Static Route. |
| wfIpxStaticSapHost | .1.3.6.1.4.1.18.3.5.5.12.1.5 |
The host address for this service. |
| wfIpxStaticSapName | .1.3.6.1.4.1.18.3.5.5.12.1.7 |
The server name. |
| wfIpxStaticSapHops | .1.3.6.1.4.1.18.3.5.5.12.1.8 |
The number of Hops away service is from router. |
| wfIpxStaticSapIndex | .1.3.6.1.4.1.18.3.5.5.12.1.9 |
Index string comprised of intf1.type.network.hostid.socket.
Makes sorting easier and its a ah work around. |
| wfIpxSapNetLvlIntf | .1.3.6.1.4.1.18.3.5.5.9.1.6 |
The Interface identifier for this filter |
| wfIpxSapNetLvlIndex | .1.3.6.1.4.1.18.3.5.5.9.1.7 |
The Filter Index . |
| wfIpxSapNetLvlDelete | .1.3.6.1.4.1.18.3.5.5.9.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX
Sap network level filter. |
| wfIpxSapNetLvlDisable | .1.3.6.1.4.1.18.3.5.5.9.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this IPX
network level SAP filter. |
| wfIpxSapNetLvlTargNetwork | .1.3.6.1.4.1.18.3.5.5.9.1.3 |
The Target Network address to monitor |
| wfIpxSapNetLvlType | .1.3.6.1.4.1.18.3.5.5.9.1.4 |
The Type of service to monitor |
| wfIpxSapNetLvlAction | .1.3.6.1.4.1.18.3.5.5.9.1.5 |
The Action to take Advertise or not Advertise |
| wfIpxSapServLvlIntf | .1.3.6.1.4.1.18.3.5.5.10.1.6 |
The Interface identifier for this filter |
| wfIpxSapServLvlIndex | .1.3.6.1.4.1.18.3.5.5.10.1.7 |
The Filter Index . |
| wfIpxSapServLvlDelete | .1.3.6.1.4.1.18.3.5.5.10.1.1 |
Create/Delete parameter. Default is created.
Users perform an SNMP SET operation on this
object in order to create/delete the IPX
server-level SAP filter. |
| wfIpxSapServLvlDisable | .1.3.6.1.4.1.18.3.5.5.10.1.2 |
Enable/Disable parameter. Default is enabled.
Users perform an SNMP SET operation on this
object in order to enable/disable this IPX
server-level SAP filter. |
| wfIpxSapServLvlTargServer | .1.3.6.1.4.1.18.3.5.5.10.1.3 |
The Server Name to monitor. |
| wfIpxSapServLvlType | .1.3.6.1.4.1.18.3.5.5.10.1.4 |
Type of service File server, Printer, etc... |
| wfIpxSapServLvlAction | .1.3.6.1.4.1.18.3.5.5.10.1.5 |
Associated Action (advertise or ignore ) |
| wfIpxTrafficFilterInterface | .1.3.6.1.4.1.18.3.5.5.11.1.7 |
The network address of the IPX
interface to which this filter is applied. |
| wfIpxTrafficFilterCircuit | .1.3.6.1.4.1.18.3.5.5.11.1.8 |
The ID of the Circuit to which the
filter is applied. |
| wfIpxTrafficFilterRuleNumber | .1.3.6.1.4.1.18.3.5.5.11.1.9 |
ID for the rule. |
| wfIpxTrafficFilterFragment | .1.3.6.1.4.1.18.3.5.5.11.1.10 |
Fragment number - for large rules. |
| wfIpxTrafficFilterCreate | .1.3.6.1.4.1.18.3.5.5.11.1.1 |
Defines the existence of the traffic filter rule:
created - traffic filter exists
delete - traffic filter does not exist and can be deleted. |
| wfIpxTrafficFilterEnable | .1.3.6.1.4.1.18.3.5.5.11.1.2 |
Defines whether or not the traffic filter rule should be used:
enabled - activate the rule.
disabled - inactivate the rule. |
| wfIpxTrafficFilterStatus | .1.3.6.1.4.1.18.3.5.5.11.1.3 |
Defines the current status of the traffic filter:
inactive - the rule is not in use.
active - the rule is being used.
error - the application detected an error in the rule. |
| wfIpxTrafficFilterCounter | .1.3.6.1.4.1.18.3.5.5.11.1.4 |
The number of received packets that have
matched this rule. |
| wfIpxTrafficFilterDefinition | .1.3.6.1.4.1.18.3.5.5.11.1.5 |
The filter rule definition. |
| wfIpxTrafficFilterReserved | .1.3.6.1.4.1.18.3.5.5.11.1.6 |
Reserved field. |
| wfIpxTrafficFilterName | .1.3.6.1.4.1.18.3.5.5.11.1.11 |
Name of the rule number. |
| Table |
| wfIpxBaseRtEntryTable | .1.3.6.1.4.1.18.3.5.5.2 |
The table of Elements in IPX's routing table |
| wfIpxBaseRt2EntryTable | .1.3.6.1.4.1.18.3.5.5.13 |
The table of Elements in IPX's routing table |
| wfIpxBaseSapEntryTable | .1.3.6.1.4.1.18.3.5.5.3 |
The table of Elements in IPX's SAP table |
| wfIpxInterfaceTable | .1.3.6.1.4.1.18.3.5.5.4 |
The network interface record |
| wfIpxRipIntfTable | .1.3.6.1.4.1.18.3.5.5.5 |
The list of RIP interfaces |
| wfIpxAdjacentHostTable | .1.3.6.1.4.1.18.3.5.5.6 |
Table of configured Static Hosts
This is implemented for hosts that are accessible over
Frame Relay, SMDS etc. where a corresponding DLCI address
must be configured for a nexthop host. |
| wfIpxStaticRouteTable | .1.3.6.1.4.1.18.3.5.5.7 |
The list of static routes used for Configuring IPX |
| wfIpxNetBiosStaticRouteTable | .1.3.6.1.4.1.18.3.5.5.8 |
The list of static routes used for Configuring IPX |
| wfIpxStaticSapTable | .1.3.6.1.4.1.18.3.5.5.12 |
The table of Static Services |
| wfIpxSapNetLvlFilterTable | .1.3.6.1.4.1.18.3.5.5.9 |
The list of Network Level SAP Filters |
| wfIpxSapServtLvlFilterTable | .1.3.6.1.4.1.18.3.5.5.10 |
The list of Server Level SAP Filters |
| wfIpxTrafficFilterTable | .1.3.6.1.4.1.18.3.5.5.11 |
IPX Traffic Filters |
| Object Identifier |
| wfIpxBase | .1.3.6.1.4.1.18.3.5.5.1 |
| wfIpxAggrStats | .1.3.6.1.4.1.18.3.5.5.14 |