SNMP MIB Search

Create/Delete parameter

Enable/Disable parameter

State parameter

Group ID parameter

Member ID parameter

Role parameter

Reference Number parameter, a 32 bit unsigned number.

Good Interface Count parameter, a 32 bit unsigned number.

Good Resource Count parameter, a 32 bit unsigned number.

Router software clears to indicate receive of role switch command

Auto Role Switching parameter - Options for Auto Role Switching.

same router prior to kicking in Auto Role Switching.

Version parameter - Redundancy Protocol Version Number

Priority parameter - Priority level to be the Primary router

Secondary Keep Alives

the Bidding Period

receiving Primary Hellos before Secondaries enter the bidding process.

any design flaws.

message to adjacent routers on the non-backed-up interfaces.

Pathname of Primary's configuration file.

Primary Member's Member ID

Primary Member's State

Primary Member's Reference Number, a 32 bit unsigned value.

Primary Member's Good Interface Count, a 32 bit unsigned value.

Primary Member's Good Resource Count, a 32 bit unsigned value.

Best Secondary Member's Member ID

Best Secondary Member's State

Best Secondary Member's Reference Number, a 32 bit unsigned value.

Best Secondary Member's Good Interface Count, a 32 bit unsigned value.

Best Secondary Member's Good Resource Count, a 32 bit unsigned value.

Flag to indiacte mode of role switch.  enabled is Warm-reboot
vs. disabled is hot-non-reboot

The rredund gate's local Slot ID

Slot mask for which slots RREDUND is eligible
to run on.  The MSBit represents slot 1, the
next most significant bit represents slot 2,
and so on...  Slots can be 1-14.
Default is all slots on a BCN.

Time (in milliseconds) we want to wait for the ATM driver
gate to come back up, before we role-switch.

Entry summary.

Entry summary.

Entry summary.

Circuit Number, used as Instance ID.

Create/Delete parameter

Enable/Disable parameter

This attribute is used for Site Manager Router Redundancy Configuration.

To indicate what element of the interface is being monitored for role switching, the circuit or the link.

For select triggering of role switching when interface fails ona per CCT basis.

For enabling/disabling sending of Router Redundancy PDU per CCT basis.

Status of the interface from Router Redundancy prospective.

Used for counting SONMP PDU transmitted on this circuit.

Used for counting good SONMP PDU received on this circuit.

Used for counting bad SONMP PDU received on this circuit.

Circuit owner of this interface.

Resource's Network Address, i.e. IP Address.

Create/Delete parameter

Enable/Disable parameter

Resource Status.

Resource Status Update Enable.

Frequency timer for Pings in sec

Number of missed Pings before Resouce is unreachable

Ping TimeOut in sec (wait this long before increment retry)

Group Member ID parameter

Member ID parameter

Create/Delete parameter

Member Net Address

Role parameter

State parameter

Reference Number parameter, a 32 bit unsigned value.

Priority parameter - Priority level to be the Primary router

Good interfaces count, a 32 bit unsigned value.

Good resources count, a 32 bit unsigned value.

Interface count

Local Interface reachable count

This tabulates the circuit specific Router Redundancy parameters.

for Router Redundancy.

This tabulates the remote members for Router Redundancy.