| Scalar Object |
| wfNetbootImage | .1.3.6.1.4.1.18.3.3.2.10.1.1 |
Enables booting of an executable image over the network. If
disabled, then the image will be read from a local file system. |
| wfNetbootConfig | .1.3.6.1.4.1.18.3.3.2.10.1.2 |
Enables booting of a configuration file over the network. If
disabled, then the config will be read from a local file system. |
| wfNetbootServerAddress | .1.3.6.1.4.1.18.3.3.2.10.1.3 |
IP address of remote server. |
| wfNetbootImageName | .1.3.6.1.4.1.18.3.3.2.10.1.4 |
Pathname of image file on remote server. |
| wfNetbootConfigName | .1.3.6.1.4.1.18.3.3.2.10.1.5 |
Pathname of configuration file on remote server. |
| wfNetbootCfgDelete | .1.3.6.1.4.1.18.3.3.2.10.1.6 |
create/delete parameter, dflt = created |
| wfNetbootImageCurr | .1.3.6.1.4.1.18.3.3.2.10.2.1 |
Current value of Netboot image flag in Non-Volatile RAM. |
| wfNetbootConfigCurr | .1.3.6.1.4.1.18.3.3.2.10.2.2 |
Current value of Netboot config flag in Non-Volatile RAM. |
| wfNetbootServerAddressCurr | .1.3.6.1.4.1.18.3.3.2.10.2.3 |
IP address of remote server. |
| wfNetbootImageNameCurr | .1.3.6.1.4.1.18.3.3.2.10.2.4 |
Pathname of image file on remote server. |
| wfNetbootConfigNameCurr | .1.3.6.1.4.1.18.3.3.2.10.2.5 |
Pathname of configuration file on remote server. |
| wfNetbootCfgEntry | .1.3.6.1.4.1.18.3.3.2.10.3.1 |
Values of a particular interface's configuration parameters. |
| wfNetbootCurrEntry | .1.3.6.1.4.1.18.3.3.2.10.4.1 |
Values of a particular interface's current configuration parameters. |
| Tabular Object |
| wfNetbootSlot | .1.3.6.1.4.1.18.3.3.2.10.3.1.2 |
instance ID Slot, filled in by driver |
| wfNetbootConnector | .1.3.6.1.4.1.18.3.3.2.10.3.1.3 |
Unique number which identifies the interface for which the
following parameters are configured. |
| wfNetbootDelete | .1.3.6.1.4.1.18.3.3.2.10.3.1.1 |
create/delete parameter, dflt = created
Deleteing this instance will set the corresponding NOVRAM
values to the default settings. |
| wfNetbootIpAddr | .1.3.6.1.4.1.18.3.3.2.10.3.1.4 |
IP address to use on this interface |
| wfNetbootIpMask | .1.3.6.1.4.1.18.3.3.2.10.3.1.5 |
IP address mask to use on this interface |
| wfNetbootNextHop | .1.3.6.1.4.1.18.3.3.2.10.3.1.6 |
IP address of the next hop router connected to this interface.
This value is used to auto-configure a static route for
Network Boot. |
| wfNetbootProtoMask | .1.3.6.1.4.1.18.3.3.2.10.3.1.7 |
Bit Mask indicating a non-default protocol is being used on
this interface. |
| wfNetbootDisable | .1.3.6.1.4.1.18.3.3.2.10.3.1.8 |
Enable or disable the interface for Netbooting. |
| wfNetbootConnName | .1.3.6.1.4.1.18.3.3.2.10.3.1.9 |
Connector name. |
| wfNetbootTokenRingSpeed | .1.3.6.1.4.1.18.3.3.2.10.3.1.10 |
Speed of the Token Ring interface for Netbooting. |
| wfNetbootBchanRate | .1.3.6.1.4.1.18.3.3.2.10.3.1.11 |
Speed B Channel for Netbooting. AN 200 Only |
| wfNetbootDsuCsuOpMode | .1.3.6.1.4.1.18.3.3.2.10.3.1.12 |
Dsu/Csu interface speed for Netbooting |
| wfNetbootCurrSlot | .1.3.6.1.4.1.18.3.3.2.10.4.1.1 |
instance ID Slot, filled in by driver |
| wfNetbootCurrConnector | .1.3.6.1.4.1.18.3.3.2.10.4.1.2 |
Unique number which identifies the interface for which the
following parameters are configured. |
| wfNetbootCurrIpAddr | .1.3.6.1.4.1.18.3.3.2.10.4.1.3 |
IP address to use on this interface |
| wfNetbootCurrIpMask | .1.3.6.1.4.1.18.3.3.2.10.4.1.4 |
IP address mask to use on this interface |
| wfNetbootCurrNextHop | .1.3.6.1.4.1.18.3.3.2.10.4.1.5 |
IP address of the next hop router connected to this interface.
This value is used to auto-configure a static route for
Network Boot. |
| wfNetbootCurrProtoMask | .1.3.6.1.4.1.18.3.3.2.10.4.1.6 |
Bit Mask indicating a non-default protocol is being used on
this interface. |
| wfNetbootCurrDisable | .1.3.6.1.4.1.18.3.3.2.10.4.1.7 |
Enable or disable the interface for Netbooting. |
| wfNetbootCurrConnName | .1.3.6.1.4.1.18.3.3.2.10.4.1.8 |
Connector name. |
| wfNetbootCurrTokenRingSpeed | .1.3.6.1.4.1.18.3.3.2.10.4.1.9 |
Speed of the Token Ring interface for Netbooting. |
| wfNetbootCurrBchanRate | .1.3.6.1.4.1.18.3.3.2.10.4.1.10 |
Speed B Channel for Netbooting. AN 200 Only |
| wfNetbootCurrDsuCsuOpMode | .1.3.6.1.4.1.18.3.3.2.10.4.1.11 |
Dsu/Csu interface speed for Netbooting |
| Table |
| wfNetbootCfgTable | .1.3.6.1.4.1.18.3.3.2.10.3 |
A Table of Interface-specific Netboot Configuration Parameters |
| wfNetbootCurrTable | .1.3.6.1.4.1.18.3.3.2.10.4 |
A Table of current values for Interface-specific Netboot Parameters |
| Object Identifier |
| wfNetbootCfgGroup | .1.3.6.1.4.1.18.3.3.2.10.1 |
| wfNetbootCurrGroup | .1.3.6.1.4.1.18.3.3.2.10.2 |