| Scalar Object |
| wfT1Entry | .1.3.6.1.4.1.18.3.4.10.1 |
An entry in the T1 table |
| Tabular Object |
| wfT1Slot | .1.3.6.1.4.1.18.3.4.10.1.4 |
instance ID Slot, filled in by driver |
| wfT1Connector | .1.3.6.1.4.1.18.3.4.10.1.5 |
instance ID Connector, filled in by driver |
| wfT1Delete | .1.3.6.1.4.1.18.3.4.10.1.1 |
create/delete parameter, dflt = created |
| wfT1Disable | .1.3.6.1.4.1.18.3.4.10.1.2 |
enable/disable parameter, dflt = enabled |
| wfT1State | .1.3.6.1.4.1.18.3.4.10.1.3 |
line driver state variable, Not Present, Init, Up |
| wfT1Madr | .1.3.6.1.4.1.18.3.4.10.1.6 |
Line mac address, filled in by driver |
| wfT1FrameType | .1.3.6.1.4.1.18.3.4.10.1.7 |
Frame Type - differentiates between two tarrifed framing formats
D4 and ESF. |
| wfT1LineBuildout | .1.3.6.1.4.1.18.3.4.10.1.8 |
Line Buildout - Approximate length of cable |
| wfT1B8ZSSupport | .1.3.6.1.4.1.18.3.4.10.1.9 |
B8ZS Support - Enables or disables Binary 8 zeros suppression |
| wfT1ClockMode | .1.3.6.1.4.1.18.3.4.10.1.10 |
Clock Mode - Specifies the source of the T1 transmit clock |
| wfT1MiniDacs | .1.3.6.1.4.1.18.3.4.10.1.11 |
MiniDacs Configuration - assigns each T1 channel to a specific
function |
| wfT1BipolarVios | .1.3.6.1.4.1.18.3.4.10.1.12 |
Number of Bipolar Violations |
| wfT1FrameBitErrs | .1.3.6.1.4.1.18.3.4.10.1.13 |
Number of frame bit errors |
| wfT1OutOfFrameErrs | .1.3.6.1.4.1.18.3.4.10.1.14 |
Number of Out of Frame errors |
| wfT1SuperFrameErrs | .1.3.6.1.4.1.18.3.4.10.1.15 |
Number of Superframe errors |
| wfT1RcvYelAlarms | .1.3.6.1.4.1.18.3.4.10.1.16 |
Number of Yellow Alarms Received |
| wfT1RcvCarrierLoss | .1.3.6.1.4.1.18.3.4.10.1.17 |
Number of instances of carrier loss |
| wfT1RcvRedAlarms | .1.3.6.1.4.1.18.3.4.10.1.18 |
Number of Red Alarm Received |
| Table |
| wfT1Table | .1.3.6.1.4.1.18.3.4.10 |
T1 line record |