CISCO-CLASS-BASED-QOS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
Gauge32,
Counter64
FROM SNMPv2-SMI
Unsigned32,
Unsigned64
FROM CISCO-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
DisplayString,
TruthValue
FROM SNMPv2-TC
ifIndex,
InterfaceIndex
FROM IF-MIB
DlciNumber
FROM CISCO-FRAME-RELAY-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoCBQosMIB MODULE-IDENTITY
LAST-UPDATED "200212030000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 800 553-NETS
E-mail: cs-qos@cisco.com"
DESCRIPTION
" Cisco Class-Based QoS MIB
**********************************
Overview
**********************************
This MIB provides read access to Quality of Service (QoS)
configuration and statistics information for Cisco
platforms that support the Modular Quality of Service
Command-line Interface (Modular QoS CLI). We recommend
users of this MIB to review the user documentation of
MQC based QoS features.
Configuration information available through this MIB includes
all ClassMap, PolicyMap, Match Statements, and Feature
Actions configuration parameters. The definitions of each
objects mentioned above are explained in the QoS objects
section.
Statistics available through this MIB include summary
counts/rates by traffic class before and after any configured
QoS policies are enforced. In addition, detailed
feature-specific statistics are available for select
PolicyMap features.
Contact your Cisco representative to determine on which
platforms the MIB is currently supported.
**********************************
QoS Acronyms
**********************************
DSCP: Differentiated Service Code Point
ECN : Explicite Congestion Notification
PIR : Peak Information Rate
PREC: Precedence
QoS : Quality Of Services
RED : Random Early Detect
WRED: Weighted Random Early Detect
**********************************
MIB Tables
**********************************
This MIB consists of the following tables:
1 : cbQosServicePolicy
2 : cbQosInterfacePolicy
3 : cbQosFrameRelayVCPolicy
4 : cbQosATMPVCPolicy
5 : cbQosObjects
6 : cbQosPolicyMapCfg
7 : cbQosClassMapCfg
8 : cbQosMatchStmtCfg
9 : cbQosQueueingCfg
10: cbQosREDCfg
11: cbQosREDClassCfg
12: cbQosPoliceCfg
13: cbQosTSCfg
14: cbQosSetCfg
15: cbQosClassMapStats
16: cbQosMatchStmtStats
17: cbQosPoliceStats
18: cbQosQueueingStats
19: cbQosTSStats
20: cbQosREDClassStats
21: cbQosPoliceActionCfg
**********************************
Definitions
**********************************
A logical interface in the context of this MIB is either
a main-interface, a sub-interface, a Frame Relay DLCI, or
an ATM virtual circuit.
**********************************
QoS Objects
**********************************
To understand Class-Based QoS features and how to navigate
the MIB tables above, the key element is to comprehend the
relationships among the different QoS objects. QoS objects
consist of ClassMaps, Match Statements and PolicyMaps,
and each Feature Actions.
Match Statement - The specific match criteria to identify
packets for classification purposes.
ClassMap - A user-defined traffic class that contains
one or many match statements used to classify packets into
different categories.
Feature Action - An action is a QoS feature. Features
include police, traffic-shaping, queueing, random detect
and packet marking(set). After the traffic is being
classified, based on the traffic classification, we can
apply these action to each traffic class.
PolicyMap - A user-defined policy that associates each QoS
action to the user-defined traffic class (ClassMap).
Service Policy - Service policy is a policymap
that is being attached to a logical interface. Because a
policymap can also be a part of the hierarchical structure
(inside a classmap), only a policymap that is directly
attached to a logical interface is considered a service
policy. Each service policy is uniquely identified by an
index called cbQosPolicyIndex. This number is usually
identical to its cbQosObjectsIndex as a policymap.
*****************************************
Runtime Instance vs Configuration objects
*****************************************
Each QoS objects have 2 sets of behaviours :
1: A configuration instance
- Each QoS objects has it's configuration portion of
information attached to it. This information does
not change whether this object is attached on multiple
interfaces and used multiple times. We uniquely
identify each QoS object with identical configuration
with the same index - cbQosConfigIndex. This index
is used in all configuration related tables.
2: A runtime instance
- Each QoS objects has it's statistical portion of
information attached to it. This information changes
when this object is attached on multiple interfaces
and used in various different places. We uniquely
identify each QoS runtime object instance with
an index that is unique across multiple instances of
the identical object - cbQosObjectsIndex.
This index is used in all statistical related tables.
In summary, a QoS object has 2 indexes associated with it:
cbQosConfigIndex is used to identify it's configuration,
which does not change regardless of number of times and
where it is being used; and cbQosObjectsIndex is used
to identify it's runtime statistics, depending on which
interface and where in a given PolicyMap hierarchy this
object is used, it may have multiple unique identifiers
to distinguish each unique usage (instance) of the same
object.
**********************************
Navigation
**********************************
The recommended method of navigating through all of the MIB
tables is to start by learning the cbQosPolicyTable and
cbQosObjectsTable MIB tables. In particular, Cisco Systems
recommends understanding the cbQosObjectsIndex and
cbQosParentObjectsIndex of each QoS feature.
The cbQosPolicyIndex and cbQosObjectsIndex are
system-assigned numbers that identify each unique instance
of a QoS feature. These indexes are never reused between
router reboots, even when changes are made to the QoS
configuration. The cbQosPolicyIndex is designed to identify
the service policies attached to logical interfaces, while
the cbQosObjectsIndex is designed to identify each QoS
feature on a specified device.
The cbQosParentObjectsIndex is designed to show the
hierarchical relationship of each QoS feature.
**********************************
cbQosPolicyTable
**********************************
Accessing cbQosPolicyTable requires cbQosPolicyIndex. This
index is a system-assigned number to uniquely identify each
service policy hanging off of each logical interface. Given
cbQosPolicyIndex the tables provide the type of
interface/media type on which this policy is applied, the
direction in which this policy is enforced, and the
cbQosIfIndex (SNMP interface index) of the underlying
interface. In the case of a policy being applied on a
Frame Relay DLCI, the cbQosFrDLCI gives you the
Frame Relay DLCI number to which this policy is attached.
In the case of policy being attached to an ATM VC,
cbQosAtmVPI and cbQosAtmVCI display the VPI and VCI of
the ATM interface respectively.
**********************************
cbQosObjectsTable
**********************************
Accessing cbQosObjectsTable requires two indexes,
cbQosPolicyIndex and cbQosObjectsIndex.
Given a particular service policy on a given interface,
there could be PolicyMaps, ClassMaps, Match Statements and
Feature Actions being used. Each instance of these objects
is uniquely identified by cbQosObjectsIndex.
Users need to decide which QoS object is interesting
and use the cbQosPolicyIndex and cbQosObjectsIndex to
locate the right element of interest. This tables provides
cbQosObjectsType, cbQosConfigIndex, and
cbQosParentObjectsIndex.
To understand the relationship of cbQosObjectsIndex,
cbQosParentObjectsIndex and the hierarchical relationship
of the QoS objects, consider the following QoS
configuration example:
Interface ethernet 0/1
Input Service Policy cntlWebTraffic
ClassMap http
match ip http
set ip precedence 5
Output Service Policy cntlSNMP_Telnet
ClassMap snmp
match ip snmp
shape average 8000 32 32
ClassMap Telnet
match ip telnet
shape average 10000 32 32
Interface ethernet 0/2
Input Service Policy cntlWebTraffic
ClassMap http
match ip http
set ip precedence 5
Output Service Policy cntlSNMP_Telnet
ClassMap snmp
match ip snmp
shape average 8000 32 32
ClassMap Telnet
match ip telnet
shape average 10000 32 32
*** In Ethernet 0/1 ***
Assume the router assigned a cbQosConfigIndex=1024 and
cbQosObjectsIndex=1084 to Policy cntlWebTraffic.
Because it is attached to an interface, it has no parent
QoS object, and thus cbQosParentObjectsIndex=0.
In addition, because cntlWebTraffic is also the service
policy of the interface, it has a unique cbQosPolicyIndex
assigned to it. In most cases, it would be the same as
the cbQosObjectsIndex, which is 1084 in this case.
Therefore, the indexes are:
cbQosPolicyIndex = 1084
cbQosObjectsIndex = 1084
cbQosConfigIndex = 1024
Assuming the router assigned a cbQosObjectsIndex=1085
and cbQosConfigIndex=1025 to ClassMap http, it is
directly being used by Policy cntlWebTraffic, and therefore
the cbQosParentObjectsIndex of ClassMap http will be 1084.
Assuming the router assigned a cbQosConfigIndex=1026 and
cbQosObjectsIndex=1086 to match ip http, it is directly
used by ClassMap http, therefore the
cbQosParentObjectsIndex of match ip http will be 1085.
Assuming the router assigned a cbQosConfigIndex=1027 and
cbQosObjectsIndex=1087 to set ip precedence 5, it is
directly used by ClassMap http, therefore the
cbQosParentObjectsIndex of match ip http will be 1085.
Assuming the router assigned a cbQosConfigIndex=1028 and
cbQosObjectsIndex=1088 to Policy cntlSNMP_Telnet.
Because it is attached to an interface, it has no parent
QoS object, and thus cbQosParentObjectsIndex=0.
In addition, because cntlSNMP_Telnet is also the service
policy of the interface, it has a unique cbQosPolicyIndex
assigned to it. In most cases, it would be the same as
the cbQosObjectsIndex, which is 1088 in this case.
Assuming the router assigned a cbQosConfigIndex=1029 and
cbQosObjectsIndex=1089 to ClassMap snmp, it is
directly being used by Policy cntlSNMP_Telnet, and
therefore the cbQosParentObjectsIndex of ClassMap snmp
will be 1088.
Assuming the router assigned a cbQosConfigIndex=1030 and
cbQosObjectsIndex=1090 to match ip snmp, it is directly
used by ClassMap snmp, and therefore the
cbQosParentObjectsIndex of match ip snmp will be 1089.
Assuming the router assigned a cbQosConfigIndex=1031 and
cbQosObjectsIndex=1091 to shape average 8000 32 32,
it is directly used by ClassMap snmp, therefore the
cbQosParentObjectsIndex of match ip snmp will be 1089.
Assuming the router assigned a cbQosConfigIndex=1032 and
cbQosObjectsIndex=1092 to ClassMap Telnet, it is
directly being used by Policy cntlSNMP_Telnet, and
therefore the cbQosParentObjectsIndex of
ClassMap Telnet will be 1088.
Assuming the router assigned a cbQosConfigIndex=1033 and
cbQosObjectsIndex=1093 to match ip telnet, it is
directly used by ClassMap Telnet, and therefore the
cbQosParentObjectsIndex of match ip telnet will be 1092.
Assuming the router assigned a cbQosConfigIndex=1034 and
cbQosObjectsIndex=1094 to shape 10000 32 32, it is
directly used by ClassMap telnet, therefore the
cbQosParentObjectsIndex of match ip telnet will be 1092.
*** In Ethernet 0/2 ***
Every objects will have a new and unique cbQosPolicyIndex
and cbQosObjectsIndex, but cbQosConfigIndex will be
shared across the same objects that are applied in
different places.
**********************************
All Config Tables
**********************************
Accessing config related tables requires the same index
- cbQosConfigIndex. (Per precedence based tables requires
a second index, which is IP precedence value) Users
should have already gone through the cbQosObjectsTable
at this point and understand each cbQosConfigIndex and the
corresponding QoS objects. Users can uniquely identify
each QoS object defined on the router and query the
entries in each stats table on a per QoS object basis.
**********************************
All Stats Tables
**********************************
Accessing all stats related tables requires the same
2 indexes. They are cbQosPolicyIndex and cbQosObjectsIndex.
(Per precedence based tables requires a third index, which
is IP precedence value) Users should have already gone
through the cbQosObjectsTable at this point and understand
the relationship of each cbQosPolicyIndex and
cbQosObjectsIndex pair and the corresponding QoS objects.
Users can uniquely identify each QoS object defined on the
router and query the entries in each stats table on a per
QoS object basis.
"
REVISION "200212030000Z"
DESCRIPTION
"Added new cbQosPoliceCfgRate64 to cbQosPoliceCfgEntry
table to support policing rates greater than fit in
the range defined for cbQosPoliceCfgRate"
REVISION "200207240000Z"
DESCRIPTION
"Added support for ECN; Pir policing; multiple
police actions; added MPLS-EXP/ATM-CLP/DR-DE/
L2Cos/DiscardClass marking in police action;
added MPLS-EXP and DiscardClass marking;
modified ATM-CLP and FR-DE marking.
Added objects to handle queue depth unit type and
queue depth pair related objects (e.g.,
cbQosQueueingCfgQLimitUnits and
cbQosQueueingCfgAggregateQLimit pair) to support
queue depth in different units."
REVISION "200103140000Z"
DESCRIPTION
"Added support for FR DE, ATM CLP and L2 marking.
Added Bandwidth remaining percent option"
REVISION "200012080000Z"
DESCRIPTION
"Added support for Police Violate counters and
DSCP WRED counters"
REVISION "200007130000Z"
DESCRIPTION
"Initial version of Class-based QoS configuration and
statistical parameters MIB"
::= { ciscoMgmt 166 }
QosObjectType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate different QoS objects .
policymap - The object in query is a PolicyMap, being
attached on a logical interface.
classmap - The object in query is a ClassMap, being
used by it's parent PolicyMap.
matchStatement - The object in query is a Match Statement,
being used by it's parent ClassMap.
queueing - The object in query is a queueing feature being
applied on the parent ClassMap.
randomDetect - The object in query is a Random Detect feature
being applied on the parent ClassMap.
trafficShaping - The object in query is a traffic-shaping
feature being applied on the parent ClassMap.
police - The object in query is a Police feature being
applied on the parent ClassMap.
set - The object in query is a Packet Marking
feature being applied on the parent ClassMap.
"
SYNTAX INTEGER {
policymap(1),
classmap(2),
matchStatement(3),
queueing (4),
randomDetect (5),
trafficShaping (6),
police (7),
set (8)
}
TrafficDirection ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate whether the Policymap is for
Input or Output direction."
SYNTAX INTEGER {
input(1),
output(2)
}
QosClassInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate whether the Classmap is for
Match All or Match Any."
SYNTAX INTEGER {
none(1),
matchAll(2),
matchAny(3)
}
QosMatchInfo ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate whether the MatchStatement is matching
on negated criteria (Match Not)."
SYNTAX INTEGER {
none(1),
matchNot(2)
}
InterfaceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Enums to indicate the type of interface to which a
particular service policy is attached.
Main Interface - Service policy is attached on the main
interface.
Sub Interface - Service policy is attached on the sub
interface.
Frame Relay DLCI - Service policy is attached on the a
Frame Relay DLCI.
ATM VC - Service policy is attached on the an ATM
Virtual Circuit.
"
SYNTAX INTEGER {
mainInterface(1),
subInterface(2),
frDLCI(3),
atmPVC(4)
}
QueueingBandwidthUnits ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The units of the bandwidth, used to allocate
bandwidth. Bandwidth can be either an absolute kbps
number, or be expressed as a percentage of the
available bandwidth.
kbps Kilo bits Per Second
percentage %
"
SYNTAX INTEGER {
kbps(1),
percentage(2),
percentageRemaining(3)
}
TrafficShapingLimit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The limit used by the traffic-shaping feature.
This value may be 'average' or 'peak',
which indicates whether it is shaping by average
rate or peak rate."
SYNTAX INTEGER {
average(1),
peak(2)
}
PoliceAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The available actions taken on packets upon
conforming, exceeding or violating the configured
police rate.
Transmit - Transmit the packet if the packet conforms
or exceeds the configured police rate.
Set IP DSCP - Set the IP DSCP value if the packet
conforms or exceeds the configured police
rate.
Set IP Precedence - Set the IP precedence value if
the packet conforms or exceeds
the configured police rate.
Set Qos Group - Set the QoS Group value if
the packet conforms or exceeds
the configured police rate.
Set MPLS Exp - Set the MPLS Experimental vaule for the
applicable action.
Set ATM CLP - Set the ATM CLP bit for the
applicable action.
Set FR DE - Set the FR DE bit for the
applicable action.
Set L2 COS - Set the 802.1p priority field in 802.1Q
VLAN tag for the applicable action.
Set Discard Class - Set the Discard Class value for the
applicable action.
Drop - Drop the packet if the packet conforms or
exceeds the configured police rate.
"
SYNTAX INTEGER {
transmit(1),
setIpDSCP(2),
setIpPrecedence(3),
setQosGroup(4),
drop(5),
setMplsExp(6),
setAtmClp(7),
setFrDe(8),
setL2Cos(9),
setDiscardClass(10)
}
SetFeatureType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Bit-wise representation of packet marking feature available
today."
SYNTAX BITS {
ipDscp(0),
ipPrecedence(1),
qosGroupNumber(2),
frDeBit(3),
atmClpBit(4),
l2Cos(5),
mplsExp(6),
discardClass(7)
}
REDMechanism ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This denotes whether Precedence-based or DSCP-based
mechanism is used with RED
precedence Based on IP precedence
dscp Based on DSCP values
"
SYNTAX INTEGER {
precedence(1),
dscp(2)
}
CbQosQueueUnitType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents an unit type of queue
size.
packets(1) Represents the UNITS of 'packets' for
queue size.
cells(2) Represents the UNITS of 'cells' for
queue size.
bytes(3) Represents the UNITS of 'bytes' for
queue size.
To support future extensions, the CbQosQueueUnitType
textual convention SHOULD NOT be sub-typed in object
type definitions.
It MAY be sub-typed in compliance statements in order to
require only a subset of these queue size types for a
compliant implementation.
Implementations must ensure that CbQosQueueUnitType
objects and any dependent object (e.g. CbQosQueueDepth)
are consistent. An inconsistentValue error must be
generated if an attempt to change an CbQosQueueUnitType
object would lead to an undefined CbQosQueueDepth value.
In particular, CbQoSQueueUnitType/CbQosQueueDepth pairs
must be changed together if the CbQosQueueUnitType
type changes (e.g. from packets(1) to cells(2))."
SYNTAX INTEGER {
packets(1),
cells(2),
bytes(3)
}
CbQosQueueDepth ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic Queue depth value.
An CbQoSQueueDepth value is always interpreted within
the context of an CbQosQueueUnitType value. Every usage
of the CbQosQueueDepth textual convention is required to
specify the CbQosQueueUnitType object which provides
the context. It is suggested that the
CbQoSQueueUnitType object is logically registered
before the object(s) which use the CbQosQueueDepth
textual convention if they appear in the same logical
row. The value of an CbQosQueueDepth object must always
be consistent with the value of the associated
CbQosQueueUnitType object. Attempts to set an
CbQosQueueDepth object to a value which is inconsistent
with the associated CbQosQueueUnitType must fail with
an inconsistentValue error."
SYNTAX Unsigned32
ciscoCBQosMIBObjects OBJECT IDENTIFIER ::= { ciscoCBQosMIB 1 }
ciscocbQosMIBConformance OBJECT IDENTIFIER ::= { ciscoCBQosMIB 2 }
cbQosServicePolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 1 }
cbQosInterfacePolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 2 }
cbQosFrameRelayVCPolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 3 }
cbQosATMPVCPolicy OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 4 }
cbQosObjects OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 5 }
cbQosPolicyMapCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 6 }
cbQosClassMapCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 7 }
cbQosMatchStmtCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 8 }
cbQosQueueingCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 9 }
cbQosREDCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 10 }
cbQosREDClassCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 11 }
cbQosPoliceCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 12 }
cbQosTSCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 13 }
cbQosSetCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 14 }
cbQosClassMapStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 15 }
cbQosMatchStmtStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 16 }
cbQosPoliceStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 17 }
cbQosQueueingStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 18 }
cbQosTSStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 19 }
cbQosREDClassStats OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 20 }
cbQosPoliceActionCfg OBJECT IDENTIFIER
::= { ciscoCBQosMIBObjects 21 }
cbQosServicePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosServicePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the interfaces/media types and the
policymap that are attached to it."
::= { cbQosServicePolicy 1 }
cbQosServicePolicyEntry OBJECT-TYPE
SYNTAX CbQosServicePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes to which a logical
interface a given policymap is attached. Depending on
the interface/media type, some fields may have meaningful
values, and some may not. Please see each individual
descriptions.
"
INDEX { cbQosPolicyIndex }
::= { cbQosServicePolicyTable 1 }
CbQosServicePolicyEntry ::= SEQUENCE {
cbQosPolicyIndex Unsigned32,
cbQosIfType InterfaceType,
cbQosPolicyDirection TrafficDirection,
cbQosIfIndex InterfaceIndex,
cbQosFrDLCI DlciNumber,
cbQosAtmVPI Unsigned32,
cbQosAtmVCI Unsigned32
}
cbQosPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
service policies (PolicyMap that has been attached
to a given logical interface)."
::= { cbQosServicePolicyEntry 1 }
cbQosIfType OBJECT-TYPE
SYNTAX InterfaceType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This describes the interface/media type to which this
service policy is attached.
"
::= { cbQosServicePolicyEntry 2 }
cbQosPolicyDirection OBJECT-TYPE
SYNTAX TrafficDirection
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the direction of traffic for which
this service policy is applied.
"
::= { cbQosServicePolicyEntry 3 }
cbQosIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"ifIndex for the interface to which this service
is attached. This field makes sense only if the
logical interface has a snmp ifIndex.
"
::= { cbQosServicePolicyEntry 4 }
cbQosFrDLCI OBJECT-TYPE
SYNTAX DlciNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"DLCI for the FRVC to which this service is attached.
This field only make sense if the service policy is
attached to a Frame Relay DLCI.
"
::= { cbQosServicePolicyEntry 5 }
cbQosAtmVPI OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VPI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC.
"
::= { cbQosServicePolicyEntry 6 }
cbQosAtmVCI OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"VCI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC.
"
::= { cbQosServicePolicyEntry 7 }
cbQosInterfacePolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosInterfacePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the service polices that are
attached to main and sub interfaces.
"
::= { cbQosInterfacePolicy 1 }
cbQosInterfacePolicyEntry OBJECT-TYPE
SYNTAX CbQosInterfacePolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Using ifIndex and Direction, each unique index pair
translates to a service policy that is attached to a
main/sub interface, for particular traffic direction.
"
INDEX { ifIndex, cbQosPolicyDirection }
::= { cbQosInterfacePolicyTable 1 }
CbQosInterfacePolicyEntry ::= SEQUENCE {
cbQosIFPolicyIndex Unsigned32
}
cbQosIFPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex.
"
::= { cbQosInterfacePolicyEntry 1 }
cbQosFrameRelayPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosFrameRelayPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the service polices that are
attached to Frame Relay DLCIs.
"
::= { cbQosFrameRelayVCPolicy 1 }
cbQosFrameRelayPolicyEntry OBJECT-TYPE
SYNTAX CbQosFrameRelayPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Using ifIndex, FR DLCI, and Direction, each unique
index combination translates to a service policy that
is attached to a FR DLCI, for particular traffic direction.
"
INDEX { ifIndex, cbQosFrDLCI, cbQosPolicyDirection }
::= { cbQosFrameRelayPolicyTable 1 }
CbQosFrameRelayPolicyEntry ::= SEQUENCE {
cbQosFRPolicyIndex Unsigned32
}
cbQosFRPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex.
"
::= { cbQosFrameRelayPolicyEntry 1 }
cbQosATMPVCPolicyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosATMPVCPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the policies that are attached to a
ATM PVC."
::= { cbQosATMPVCPolicy 1 }
cbQosATMPVCPolicyEntry OBJECT-TYPE
SYNTAX CbQosATMPVCPolicyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Using ifIndex, VPI, VCI, and Direction, each unique
index combination translates to a service policy that
is attached to a ATM VC, for particular traffic direction.
"
INDEX { ifIndex, cbQosAtmVPI,
cbQosAtmVCI, cbQosPolicyDirection }
::= { cbQosATMPVCPolicyTable 1 }
CbQosATMPVCPolicyEntry ::= SEQUENCE {
cbQosATMPolicyIndex Unsigned32
}
cbQosATMPolicyIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex.
"
::= { cbQosATMPVCPolicyEntry 1 }
cbQosObjectsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies QoS objects (classmap, policymap,
match statements, and actions) hierarchy. This table also
provide relationship between each PolicyIndex/ObjectsIndex
pair and the ConfigIndex. ConfigIndex is essential for
querying any configuration tables.
"
::= { cbQosObjects 1 }
cbQosObjectsEntry OBJECT-TYPE
SYNTAX CbQosObjectsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A QoS object entry. Objects covered in this table are
PolicyMap, ClassMap, Match Statements, and Actions.
Each entry is indexed by system-generated cbQosPolicyIndex,
and cbQosObjectsIndex, which represents a runtime instance
of a QoS object. In conjunction with the
cbQosParentObjectsIndex, a management station can
determine the hierarchical relationship of those QoS
objects. Given that classmaps and service policies can
be nested entites, each entry in this table represents a
unique instance of such object. Each runtime object
instance has a corresponding config object, which contains
the configuration information of such QoS object. The
config object is indexed by cbQosConfigIndex.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex }
::= { cbQosObjectsTable 1 }
CbQosObjectsEntry ::= SEQUENCE {
cbQosObjectsIndex Unsigned32,
cbQosConfigIndex Unsigned32,
cbQosObjectsType QosObjectType,
cbQosParentObjectsIndex Unsigned32
}
cbQosObjectsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) instance specific
index for cbQosObjectsEntry."
::= { cbQosObjectsEntry 1 }
cbQosConfigIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) config (instance
independent) index for each Object. Each objects having
the same configuration share the same config index.
"
::= { cbQosObjectsEntry 2 }
cbQosObjectsType OBJECT-TYPE
SYNTAX QosObjectType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the QoS object.
"
::= { cbQosObjectsEntry 3 }
cbQosParentObjectsIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The parent instance index of a QoS object.
For a ClassMap, the parent index would be the index of
the attached PolicyMap.
For a Match Statement, the parent index would be the
index of the ClassMap that uses this Match Statement.
For an action, the parent index would be the
index of the ClassMap that applies such Action.
For a non-hierarchical PolicyMap, the parent would be
the interface to which the policy is attached, thus the
parent index would be 0.
For a hierarchical PolicyMap, the parent index would
be the index of the ClassMap to which the nested
policy is attached."
::= { cbQosObjectsEntry 4 }
cbQosPolicyMapCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPolicyMapCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Policymap configuration information
"
::= { cbQosPolicyMapCfg 1 }
cbQosPolicyMapCfgEntry OBJECT-TYPE
SYNTAX CbQosPolicyMapCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a policymap. The information includes: Name, and it's
description. This table contains configuration information
only, no statistics associated with it. Therefore, it is
indexed by the cbQosConfigIndex of each PolicyMap.
"
INDEX { cbQosConfigIndex }
::= { cbQosPolicyMapCfgTable 1 }
CbQosPolicyMapCfgEntry ::= SEQUENCE {
cbQosPolicyMapName DisplayString,
cbQosPolicyMapDesc DisplayString
}
cbQosPolicyMapName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Policymap."
::= { cbQosPolicyMapCfgEntry 1 }
cbQosPolicyMapDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the PolicyMap."
::= { cbQosPolicyMapCfgEntry 2 }
cbQosCMCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosCMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ClassMap configuration information
"
::= { cbQosClassMapCfg 1 }
cbQosCMCfgEntry OBJECT-TYPE
SYNTAX CbQosCMCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a classmap. The information includes: Name, and it's
description and whether it is a Mathc-All or Match-Any
class. This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each ClassMap.
"
INDEX { cbQosConfigIndex }
::= { cbQosCMCfgTable 1 }
CbQosCMCfgEntry ::= SEQUENCE {
cbQosCMName DisplayString,
cbQosCMDesc DisplayString,
cbQosCMInfo QosClassInfo
}
cbQosCMName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Classmap."
::= { cbQosCMCfgEntry 1 }
cbQosCMDesc OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description of the Classmap."
::= { cbQosCMCfgEntry 2 }
cbQosCMInfo OBJECT-TYPE
SYNTAX QosClassInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Match all vs Match any in a given class."
::= { cbQosCMCfgEntry 3 }
cbQosMatchStmtCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosMatchStmtCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ClassMap configuration information
"
::= { cbQosMatchStmtCfg 1 }
cbQosMatchStmtCfgEntry OBJECT-TYPE
SYNTAX CbQosMatchStmtCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a MatchStatement. The information includes: Name,
and whether it is a Match or Match-Not
statement. This table contains configuration information
only, no statistics associated with it. Therefore, it is
indexed by the cbQosConfigIndex of each MatchStatement.
"
INDEX { cbQosConfigIndex }
::= { cbQosMatchStmtCfgTable 1 }
CbQosMatchStmtCfgEntry ::= SEQUENCE {
cbQosMatchStmtName DisplayString,
cbQosMatchStmtInfo QosMatchInfo
}
cbQosMatchStmtName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the Match Statement."
::= { cbQosMatchStmtCfgEntry 1 }
cbQosMatchStmtInfo OBJECT-TYPE
SYNTAX QosMatchInfo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Match vs Match Not in a given class."
::= { cbQosMatchStmtCfgEntry 2 }
cbQosQueueingCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosQueueingCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Queueing Action configuration
information
"
::= { cbQosQueueingCfg 1 }
cbQosQueueingCfgEntry OBJECT-TYPE
SYNTAX CbQosQueueingCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a queueing action. The information
includes: Bandwidth, Units, Flow Enabled, Priority Enabled,
and Q size.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each Queueing Action.
"
INDEX { cbQosConfigIndex }
::= { cbQosQueueingCfgTable 1 }
CbQosQueueingCfgEntry ::= SEQUENCE {
cbQosQueueingCfgBandwidth Integer32,
cbQosQueueingCfgBandwidthUnits QueueingBandwidthUnits,
cbQosQueueingCfgFlowEnabled TruthValue,
cbQosQueueingCfgPriorityEnabled TruthValue,
cbQosQueueingCfgAggregateQSize Integer32,
cbQosQueueingCfgIndividualQSize Integer32,
cbQosQueueingCfgDynamicQNumber Integer32,
cbQosQueueingCfgPrioBurstSize Unsigned32,
cbQosQueueingCfgQLimitUnits CbQosQueueUnitType,
cbQosQueueingCfgAggregateQLimit CbQosQueueDepth
}
cbQosQueueingCfgBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..2000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured bandwidth allocated to this traffic
class. In the case of a bandwidth policy, this value
represents a minimum b/w guarantee for the traffic
class. In the case of a priority policy, this value
represents the maximum rate at which priority service
is guaranteed."
::= { cbQosQueueingCfgEntry 1 }
cbQosQueueingCfgBandwidthUnits OBJECT-TYPE
SYNTAX QueueingBandwidthUnits
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Units of the accompanying cbQosQueueingCfgbandwidth
parameter.
"
::= { cbQosQueueingCfgEntry 2 }
cbQosQueueingCfgFlowEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if flow-based fair-queue is
enabled for this class."
::= { cbQosQueueingCfgEntry 3 }
cbQosQueueingCfgPriorityEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if low latency queueing
(priority) is enabled for this class."
::= { cbQosQueueingCfgEntry 4 }
cbQosQueueingCfgAggregateQSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum number of packets that can be held in all the
individual queues associated with this class
before packets are dropped. This object is deprecated
by cbQosQueueingCfgAggregateQLimit."
::= { cbQosQueueingCfgEntry 5 }
cbQosQueueingCfgIndividualQSize OBJECT-TYPE
SYNTAX Integer32 (1..32768)
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
This field only makes sense in the context of
Flow-based fair-queueing.
"
::= { cbQosQueueingCfgEntry 6 }
cbQosQueueingCfgDynamicQNumber OBJECT-TYPE
SYNTAX Integer32 (1..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of dynamic queues supported when
flow-based fair-queue is in use."
::= { cbQosQueueingCfgEntry 7 }
cbQosQueueingCfgPrioBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (32..64000000)
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"In the priority queue, this is the number of bytes
allowed in a single burst.
This parameter only makes sense if Priority is enabled
"
::= { cbQosQueueingCfgEntry 8 }
cbQosQueueingCfgQLimitUnits OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type of
cbQosQueueingCfgAggregateQLimit object."
::= { cbQosQueueingCfgEntry 9 }
cbQosQueueingCfgAggregateQLimit OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum allowed queue size for all the individual
queues associated with this class. When the queue size
exceed this value, the packets will be dropped."
::= { cbQosQueueingCfgEntry 10 }
cbQosREDCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosREDCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies WRED Action configuration
information
"
::= { cbQosREDCfg 1 }
cbQosREDCfgEntry OBJECT-TYPE
SYNTAX CbQosREDCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration
information about a WRED Action. The table holds global
(per traffic class) configuration like: Expon Weight
and Mean Q size.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each WRED Action.
"
INDEX { cbQosConfigIndex }
::= { cbQosREDCfgTable 1 }
CbQosREDCfgEntry ::= SEQUENCE {
cbQosREDCfgExponWeight Integer32,
cbQosREDCfgMeanQsize Integer32,
cbQosREDCfgDscpPrec REDMechanism,
cbQosREDCfgECNEnabled TruthValue
}
cbQosREDCfgExponWeight OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The decay factor for the queue average calculation.
The decay factor is equal to raising 2 to the power
of N, where N could be up to 16.
The smaller the number, the faster it decays."
::= { cbQosREDCfgEntry 1 }
cbQosREDCfgMeanQsize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The average queue size, computed and used by the WRED
algorithm. This is deprecated by cbQosREDMeanQsize."
::= { cbQosREDCfgEntry 2 }
cbQosREDCfgDscpPrec OBJECT-TYPE
SYNTAX REDMechanism
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Classification mechanism used by RED - precedence
or DSCP-based."
::= { cbQosREDCfgEntry 3 }
cbQosREDCfgECNEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Boolean to indicate if explicit congestion notification
enabled for this class."
::= { cbQosREDCfgEntry 4 }
cbQosREDClassCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosREDClassCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies WRED Action configuration
information on a per IP precedence basis.
"
::= { cbQosREDClassCfg 1 }
cbQosREDClassCfgEntry OBJECT-TYPE
SYNTAX CbQosREDClassCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a WRED Action. The table holds the per IP precedence
based WRED configuration parameters.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex and cbQosREDValue
of each WRED Action.
"
INDEX { cbQosConfigIndex, cbQosREDValue}
::= { cbQosREDClassCfgTable 1 }
CbQosREDClassCfgEntry ::= SEQUENCE {
cbQosREDValue Integer32,
cbQosREDCfgMinThreshold Integer32,
cbQosREDCfgMaxThreshold Integer32,
cbQosREDCfgPktDropProb Integer32,
cbQosREDClassCfgThresholdUnit CbQosQueueUnitType,
cbQosREDClassCfgMinThreshold CbQosQueueDepth,
cbQosREDClassCfgMaxThreshold CbQosQueueDepth
}
cbQosREDValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP precedence or IP DSCP of this entry."
::= { cbQosREDClassCfgEntry 1 }
cbQosREDCfgMinThreshold OBJECT-TYPE
SYNTAX Integer32 (1..32768)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Minimum threshold in number of packets. When the
average queue length reaches this number, WRED begins
to drop packets with the specified IP precedence.
This is deprecated by cbQosREDClassCfgMinThreshold."
::= { cbQosREDClassCfgEntry 2 }
cbQosREDCfgMaxThreshold OBJECT-TYPE
SYNTAX Integer32 (1..32768)
UNITS "Packets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Maximum threshold in number of packets. When the
average queue length exceeds this number, WRED drops
all packets with the specified IP precedence.
This is deprecated by cbQosREDClassCfgMaxThreshold."
::= { cbQosREDClassCfgEntry 3 }
cbQosREDCfgPktDropProb OBJECT-TYPE
SYNTAX Integer32 (1..65536)
UNITS ""
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denominator for the fraction of packets dropped when
the average queue depth is MaxDepthThreshold. For
example, if the denominator is 10, one out of every 10
packets is dropped when the average queue is at the
MaxDepthThreshold."
::= { cbQosREDClassCfgEntry 4 }
cbQosREDClassCfgThresholdUnit OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type to measure the RED thresholds.
The objects covered are cbQosREDClassCfgMinThreshold
and cbQosREDClassCfgMaxThreshold."
::= { cbQosREDClassCfgEntry 5 }
cbQosREDClassCfgMinThreshold OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum WRED threshold value. When the average
queue length reaches this number, WRED begins to
drop packets according to REDMechanism specificed
in cbQosREDCfgDscpPrec."
::= { cbQosREDClassCfgEntry 6 }
cbQosREDClassCfgMaxThreshold OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum WRED threshold value. When the average
queue length exceeds this number, WRED drops all
packets according to REDMechanism specificed
in cbQosREDCfgDscpPrec."
::= { cbQosREDClassCfgEntry 7 }
cbQosPoliceCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action configuration
information.
"
::= { cbQosPoliceCfg 1 }
cbQosPoliceCfgEntry OBJECT-TYPE
SYNTAX CbQosPoliceCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a Police Action. The table holds Policy
configuration parameters, such as rate, burst size, and
actions based on traffic rates.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex.
"
INDEX { cbQosConfigIndex }
::= { cbQosPoliceCfgTable 1 }
CbQosPoliceCfgEntry ::= SEQUENCE {
cbQosPoliceCfgRate Unsigned32,
cbQosPoliceCfgBurstSize Unsigned32,
cbQosPoliceCfgExtBurstSize Unsigned32,
cbQosPoliceCfgConformAction PoliceAction,
cbQosPoliceCfgConformSetValue Unsigned32,
cbQosPoliceCfgExceedAction PoliceAction,
cbQosPoliceCfgExceedSetValue Unsigned32,
cbQosPoliceCfgViolateAction PoliceAction,
cbQosPoliceCfgViolateSetValue Unsigned32,
cbQosPoliceCfgPir Unsigned32,
cbQosPoliceCfgRate64 Unsigned64
}
cbQosPoliceCfgRate OBJECT-TYPE
SYNTAX Unsigned32 (8000..2000000000)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate. This is the sustained
rate permitted by policing.
If a committed policing rate greater than 2000000000
is configurable on the system, then the configured
rate is available in cbQosPoliceCfgRate64."
::= { cbQosPoliceCfgEntry 1 }
cbQosPoliceCfgBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (1000..512000000)
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in bytes, in excess of the
committed policing rate that will be permitted by
the policing feature."
::= { cbQosPoliceCfgEntry 2 }
cbQosPoliceCfgExtBurstSize OBJECT-TYPE
SYNTAX Unsigned32 (1000..512000000)
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in bytes, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases."
::= { cbQosPoliceCfgEntry 3 }
cbQosPoliceCfgConformAction OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Action to be taken when the traffic is within the
configured rate, that is, the traffic rate is
conforming.
This object is deprecated and defined in
cqQosPoliceActionCfgTable.
"
::= { cbQosPoliceCfgEntry 4 }
cbQosPoliceCfgConformSetValue OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"New packet attribute values for each packets that
conforms to the configured Police rate.
This object is deprecated and defined in
cqQosPoliceActionCfgTable.
"
::= { cbQosPoliceCfgEntry 5 }
cbQosPoliceCfgExceedAction OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Action to be taken when the traffic exceeds the
configured rate, that is, the traffic is
non-conforming.
This object is deprecated and defined in
cqQosPoliceActionCfgTable.
"
::= { cbQosPoliceCfgEntry 6 }
cbQosPoliceCfgExceedSetValue OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"New packet attribute values for each packets that
conforms to the configured Police rate.
This object is deprecated and defined in
cqQosPoliceActionCfgTable.
"
::= { cbQosPoliceCfgEntry 7 }
cbQosPoliceCfgViolateAction OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets.
This object is deprecated and defined in
cqQosPoliceActionCfgTable.
"
::= { cbQosPoliceCfgEntry 8 }
cbQosPoliceCfgViolateSetValue OBJECT-TYPE
SYNTAX Unsigned32 (1..99)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"New packet attribute values for each packets that
conforms to the Police violate action. The packet
attibute values depend on the action that is taken
for the particular packet. For example, if the
action was to set the dscp value, this entry describes
the value it is set to.
This object is deprecated and defined in
cqQosPoliceActionCfgTable.
"
::= { cbQosPoliceCfgEntry 9 }
cbQosPoliceCfgPir OBJECT-TYPE
SYNTAX Unsigned32 (8000..2000000000)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate. This is the peak
rate permitted by two rate policing."
::= { cbQosPoliceCfgEntry 10 }
cbQosPoliceCfgRate64 OBJECT-TYPE
SYNTAX Unsigned64
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed policing rate. This is the sustained
rate permitted by policing."
::= { cbQosPoliceCfgEntry 11 }
cbQosPoliceActionCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceActionCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action configuration
information.
"
::= { cbQosPoliceActionCfg 1 }
cbQosPoliceActionCfgEntry OBJECT-TYPE
SYNTAX CbQosPoliceActionCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about Actions for one Police. The table holds Polic
action specific configuration parameters.
This table is a sub-table for cbQosPoliceCfgTable. There is
a 1-to-1 association between one entry here and one entry in
cbQosPoliceCfgTable.
This table contains configuration information only,
no statistics associated with it.
This table has two indices. The first is cbQosConfigIndex
which is drived directly from cbQosPoliceCfgTable to keep the
1-to-1 mapping nature between two tables.
The second is cbQosPoliceActionCfgIndex used to reference
the actual actions configured. The maximum number of actions
supported is determined by the system, which is 5 currently.
"
INDEX { cbQosConfigIndex, cbQosPoliceActionCfgIndex }
::= { cbQosPoliceActionCfgTable 1 }
CbQosPoliceActionCfgEntry ::= SEQUENCE {
cbQosPoliceActionCfgIndex Unsigned32,
cbQosPoliceActionCfgConform PoliceAction,
cbQosPoliceActionCfgConformSetValue Unsigned32,
cbQosPoliceActionCfgExceed PoliceAction,
cbQosPoliceActionCfgExceedSetValue Unsigned32,
cbQosPoliceActionCfgViolate PoliceAction,
cbQosPoliceActionCfgViolateSetValue Unsigned32
}
cbQosPoliceActionCfgIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary (system-assigned) index for police
actions that are defined by a police configuration.
"
::= { cbQosPoliceActionCfgEntry 1 }
cbQosPoliceActionCfgConform OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets.
"
::= { cbQosPoliceActionCfgEntry 2 }
cbQosPoliceActionCfgConformSetValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgConform.
This object will be set to zero if the corrsponding
police action does not require a set value, such as
no action, drop action or transmit action.
"
::= { cbQosPoliceActionCfgEntry 3 }
cbQosPoliceActionCfgExceed OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets.
"
::= { cbQosPoliceActionCfgEntry 4 }
cbQosPoliceActionCfgExceedSetValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgExceed.
This object will be set to zero if the corrsponding
police action does not require a set value, such as
no action, drop action or transmit action.
"
::= { cbQosPoliceActionCfgEntry 5 }
cbQosPoliceActionCfgViolate OBJECT-TYPE
SYNTAX PoliceAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action to be taken when the traffic exceeds the
conform and exceed token buckets.
"
::= { cbQosPoliceActionCfgEntry 6 }
cbQosPoliceActionCfgViolateSetValue OBJECT-TYPE
SYNTAX Unsigned32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgViolate.
This object will be set to zero if the corrsponding
police action does not require a set value, such as
no action, drop action or transmit action.
"
::= { cbQosPoliceActionCfgEntry 7 }
cbQosTSCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTSCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies traffic-shaping Action configuration
information.
"
::= { cbQosTSCfg 1 }
cbQosTSCfgEntry OBJECT-TYPE
SYNTAX CbQosTSCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a traffic-shaping Action. The table holds Traffic
Shaping configuration parameters, such as rate, burst size,
and Shaping types.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex.
"
INDEX { cbQosConfigIndex }
::= { cbQosTSCfgTable 1 }
CbQosTSCfgEntry ::= SEQUENCE {
cbQosTSCfgRate Integer32,
cbQosTSCfgBurstSize Integer32,
cbQosTSCfgExtBurstSize Integer32,
cbQosTSCfgAdaptiveEnabled TruthValue,
cbQosTSCfgAdaptiveRate Integer32,
cbQosTSCfgLimitType TrafficShapingLimit
}
cbQosTSCfgRate OBJECT-TYPE
SYNTAX Integer32 (8000..154400000)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The committed traffic-shaping rate. This is the
sustained rate permitted by the traffic-shaping."
::= { cbQosTSCfgEntry 1 }
cbQosTSCfgBurstSize OBJECT-TYPE
SYNTAX Integer32 (256..154400000)
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in bits, in excess of the
committed traffic-shaping rate that will be
instantaneously permitted by this feature."
::= { cbQosTSCfgEntry 2 }
cbQosTSCfgExtBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..154400000)
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of traffic, in bits, in excess of the
burst limit, which may be conditionnally permitted
by traffic-shaping feature."
::= { cbQosTSCfgEntry 3 }
cbQosTSCfgAdaptiveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates is adaptive traffic-shaping
has been enabled."
::= { cbQosTSCfgEntry 4 }
cbQosTSCfgAdaptiveRate OBJECT-TYPE
SYNTAX Integer32 (8000..154400000)
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current adaptive traffic
shaping rate."
::= { cbQosTSCfgEntry 5 }
cbQosTSCfgLimitType OBJECT-TYPE
SYNTAX TrafficShapingLimit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if traffic-shaping is limiting
traffic based on the peak rate or the average rate.
"
::= { cbQosTSCfgEntry 6 }
cbQosSetCfgTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosSetCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Packet Marking Action configuration
information.
"
::= { cbQosSetCfg 1 }
cbQosSetCfgEntry OBJECT-TYPE
SYNTAX CbQosSetCfgEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes configuration information
about a Packet Marking Action. The table holds Packet
Marking configuration parameters, such as type of packet
marking and values being set to.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex.
"
INDEX { cbQosConfigIndex }
::= { cbQosSetCfgTable 1 }
CbQosSetCfgEntry ::= SEQUENCE {
cbQosSetCfgFeature SetFeatureType,
cbQosSetCfgIpDSCPValue Integer32,
cbQosSetCfgIpPrecedenceValue Integer32,
cbQosSetCfgQosGroupValue Integer32,
cbQosSetCfgL2CosValue Integer32,
cbQosSetCfgMplsExpValue Unsigned32,
cbQosSetCfgDiscardClassValue Unsigned32
}
cbQosSetCfgFeature OBJECT-TYPE
SYNTAX SetFeatureType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit-wise position of each packet marking feature.
"
::= { cbQosSetCfgEntry 1 }
cbQosSetCfgIpDSCPValue OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP DSCP value at which the packet is being set
by the packet marking feature."
::= { cbQosSetCfgEntry 2 }
cbQosSetCfgIpPrecedenceValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP precedence value at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 3 }
cbQosSetCfgQosGroupValue OBJECT-TYPE
SYNTAX Integer32 (0..99)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The QoS Group number at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 4 }
cbQosSetCfgL2CosValue OBJECT-TYPE
SYNTAX Integer32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Layer 2 Cos value at which the packet is being
set by the packet marking feature."
::= { cbQosSetCfgEntry 5 }
cbQosSetCfgMplsExpValue OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MPLS experimental value at which the packet
is being set by the packet marking feature."
::= { cbQosSetCfgEntry 6 }
cbQosSetCfgDiscardClassValue OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Discard Class value at which the packet
is being set by the packet marking feature."
::= { cbQosSetCfgEntry 7 }
cbQosCMStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosCMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ClassMap related Statistical
information.
"
::= { cbQosClassMapStats 1 }
cbQosCMStatsEntry OBJECT-TYPE
SYNTAX CbQosCMStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about ClassMap. ClassMap specific information
you can find in this table are : pre/post policy pkt/byte
counts, bit rates, drop pkt/bytes and no buffer drops.
This table contains statistical information only,
no configuration information associated with it. Therefore,
it is indexed by the instance specific IDs, such as
cbQosPolicyIndex and cbQosObjectsIndex.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex }
::= { cbQosCMStatsTable 1 }
CbQosCMStatsEntry ::= SEQUENCE {
cbQosCMPrePolicyPktOverflow Counter32,
cbQosCMPrePolicyPkt Counter32,
cbQosCMPrePolicyPkt64 Counter64,
cbQosCMPrePolicyByteOverflow Counter32,
cbQosCMPrePolicyByte Counter32,
cbQosCMPrePolicyByte64 Counter64,
cbQosCMPrePolicyBitRate Gauge32,
cbQosCMPostPolicyByteOverflow Counter32,
cbQosCMPostPolicyByte Counter32,
cbQosCMPostPolicyByte64 Counter64,
cbQosCMPostPolicyBitRate Gauge32,
cbQosCMDropPktOverflow Counter32,
cbQosCMDropPkt Counter32,
cbQosCMDropPkt64 Counter64,
cbQosCMDropByteOverflow Counter32,
cbQosCMDropByte Counter32,
cbQosCMDropByte64 Counter64,
cbQosCMDropBitRate Gauge32,
cbQosCMNoBufDropPktOverflow Counter32,
cbQosCMNoBufDropPkt Counter32,
cbQosCMNoBufDropPkt64 Counter64
}
cbQosCMPrePolicyPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 1 }
cbQosCMPrePolicyPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 2 }
cbQosCMPrePolicyPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound packets prior to executing
any QoS policies."
::= { cbQosCMStatsEntry 3 }
cbQosCMPrePolicyByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 4 }
cbQosCMPrePolicyByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosCMStatsEntry 5 }
cbQosCMPrePolicyByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound octets prior to executing
any QoS policies."
::= { cbQosCMStatsEntry 6 }
cbQosCMPrePolicyBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic prior to executing any QoS
policies."
::= { cbQosCMStatsEntry 7 }
cbQosCMPostPolicyByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of outbound octets after executing
QoS policies."
::= { cbQosCMStatsEntry 8 }
cbQosCMPostPolicyByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of outbound octets after executing
QoS policies."
::= { cbQosCMStatsEntry 9 }
cbQosCMPostPolicyByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of outbound octets after executing
QoS policies."
::= { cbQosCMStatsEntry 10 }
cbQosCMPostPolicyBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic after executing QoS
policies."
::= { cbQosCMStatsEntry 11 }
cbQosCMDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits counter of dropped pkts per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 12 }
cbQosCMDropPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits counter of dropped pkts per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 13 }
cbQosCMDropPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits counter of dropped pkts per class as
the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 14 }
cbQosCMDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits counter of dropped bytes per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 15 }
cbQosCMDropByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits counter of dropped bytes per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 16 }
cbQosCMDropByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits counter of dropped bytes per class as the
result of all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 17 }
cbQosCMDropBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the drops per class as the result of
all features that can produce drops
(e.g., police, random detect, etc.)."
::= { cbQosCMStatsEntry 18 }
cbQosCMNoBufDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits drop packet count which occured
due to a lack of SRAM buffers during output processing
on an interface."
::= { cbQosCMStatsEntry 19 }
cbQosCMNoBufDropPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits drop packet count which occured due
to a lack of SRAM buffers during output processing on
an interface."
::= { cbQosCMStatsEntry 20 }
cbQosCMNoBufDropPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits drop packet count which occured due to a
lack of SRAM buffers during output processing on an
interface."
::= { cbQosCMStatsEntry 21 }
cbQosMatchStmtStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosMatchStmtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Match Statement related statistical
information.
"
::= { cbQosMatchStmtStats 1 }
cbQosMatchStmtStatsEntry OBJECT-TYPE
SYNTAX CbQosMatchStmtStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about Match Statement. Match Statement specific
information you can find in this table are :
Pre policy pkt/byte counters, and bit rates.
This table contains statistical information only,
no configuration information associated with it. Therefore,
it is indexed by the instance specific IDs, such as
cbQosPolicyIndex and cbQosObjectsIndex.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex }
::= { cbQosMatchStmtStatsTable 1 }
CbQosMatchStmtStatsEntry ::= SEQUENCE {
cbQosMatchPrePolicyPktOverflow Counter32,
cbQosMatchPrePolicyPkt Counter32,
cbQosMatchPrePolicyPkt64 Counter64,
cbQosMatchPrePolicyByteOverflow Counter32,
cbQosMatchPrePolicyByte Counter32,
cbQosMatchPrePolicyByte64 Counter64,
cbQosMatchPrePolicyBitRate Gauge32
}
cbQosMatchPrePolicyPktOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 1 }
cbQosMatchPrePolicyPkt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound packets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 2 }
cbQosMatchPrePolicyPkt64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound packets prior to executing
any QoS policies."
::= { cbQosMatchStmtStatsEntry 3 }
cbQosMatchPrePolicyByteOverflow OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 4 }
cbQosMatchPrePolicyByte OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of inbound octets prior to
executing any QoS policies."
::= { cbQosMatchStmtStatsEntry 5 }
cbQosMatchPrePolicyByte64 OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of inbound octets prior to executing
any QoS policies."
::= { cbQosMatchStmtStatsEntry 6 }
cbQosMatchPrePolicyBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the traffic prior to executing any QoS
policies."
::= { cbQosMatchStmtStatsEntry 7 }
cbQosPoliceStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosPoliceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Police Action related Statistical
information.
"
::= { cbQosPoliceStats 1 }
cbQosPoliceStatsEntry OBJECT-TYPE
SYNTAX CbQosPoliceStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about Police Action. Police Action specific
information you can find in this table are :
Conformed/Exceeded pkt/byte counters, bit rates.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex }
::= { cbQosPoliceStatsTable 1 }
CbQosPoliceStatsEntry ::= SEQUENCE {
cbQosPoliceConformedPktOverflow Counter32,
cbQosPoliceConformedPkt Counter32,
cbQosPoliceConformedPkt64 Counter64,
cbQosPoliceConformedByteOverflow Counter32,
cbQosPoliceConformedByte Counter32,
cbQosPoliceConformedByte64 Counter64,
cbQosPoliceConformedBitRate Gauge32,
cbQosPoliceExceededPktOverflow Counter32,
cbQosPoliceExceededPkt Counter32,
cbQosPoliceExceededPkt64 Counter64,
cbQosPoliceExceededByteOverflow Counter32,
cbQosPoliceExceededByte Counter32,
cbQosPoliceExceededByte64 Counter64,
cbQosPoliceExceededBitRate Gauge32,
cbQosPoliceViolatedPktOverflow Counter32,
cbQosPoliceViolatedPkt Counter32,
cbQosPoliceViolatedPkt64 Counter64,
cbQosPoliceViolatedByteOverflow Counter32,
cbQosPoliceViolatedByte Counter32,
cbQosPoliceViolatedByte64 Counter64,
cbQosPoliceViolatedBitRate Gauge32
}
cbQosPoliceConformedPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 1 }
cbQosPoliceConformedPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 2 }
cbQosPoliceConformedPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets treated as conforming
by the policing feature."
::= { cbQosPoliceStatsEntry 3 }
cbQosPoliceConformedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 4 }
cbQosPoliceConformedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets treated as
conforming by the policing feature."
::= { cbQosPoliceStatsEntry 5 }
cbQosPoliceConformedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets treated as conforming
by the policing feature."
::= { cbQosPoliceStatsEntry 6 }
cbQosPoliceConformedBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of conforming traffic."
::= { cbQosPoliceStatsEntry 7 }
cbQosPoliceExceededPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 8 }
cbQosPoliceExceededPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bits count of packets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 9 }
cbQosPoliceExceededPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 10 }
cbQosPoliceExceededByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 11 }
cbQosPoliceExceededByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 12 }
cbQosPoliceExceededByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets treated as
non-conforming by the policing feature."
::= { cbQosPoliceStatsEntry 13 }
cbQosPoliceExceededBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the non-conforming traffic."
::= { cbQosPoliceStatsEntry 14 }
cbQosPoliceViolatedPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 15 }
cbQosPoliceViolatedPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 32 bits count of packets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 16 }
cbQosPoliceViolatedPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 17 }
cbQosPoliceViolatedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 18 }
cbQosPoliceViolatedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 19 }
cbQosPoliceViolatedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets treated as
violated by the policing feature."
::= { cbQosPoliceStatsEntry 20 }
cbQosPoliceViolatedBitRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bit rate of the violating traffic."
::= { cbQosPoliceStatsEntry 21 }
cbQosQueueingStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosQueueingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies Queueing Action related Statistical
information.
"
::= { cbQosQueueingStats 1 }
cbQosQueueingStatsEntry OBJECT-TYPE
SYNTAX CbQosQueueingStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about queueing action. Queueing action specific
information you can find in this table are :
various Q depth, and discard pkt/byte counters.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex }
::= { cbQosQueueingStatsTable 1 }
CbQosQueueingStatsEntry ::= SEQUENCE {
cbQosQueueingCurrentQDepth Gauge32,
cbQosQueueingMaxQDepth Gauge32,
cbQosQueueingDiscardByteOverflow Counter32,
cbQosQueueingDiscardByte Counter32,
cbQosQueueingDiscardByte64 Counter64,
cbQosQueueingDiscardPktOverflow Counter32,
cbQosQueueingDiscardPkt Counter32,
cbQosQueueingDiscardPkt64 Counter64
}
cbQosQueueingCurrentQDepth OBJECT-TYPE
SYNTAX Gauge32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current depth of the queue."
::= { cbQosQueueingStatsEntry 1 }
cbQosQueueingMaxQDepth OBJECT-TYPE
SYNTAX Gauge32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum depth of the queue."
::= { cbQosQueueingStatsEntry 2 }
cbQosQueueingDiscardByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bit count of octets, associated with
this class, that were dropped by queueing."
::= { cbQosQueueingStatsEntry 3 }
cbQosQueueingDiscardByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets, associated with
this class, that were dropped by queueing."
::= { cbQosQueueingStatsEntry 4 }
cbQosQueueingDiscardByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of octets, associated with this class,
that were dropped by queueing."
::= { cbQosQueueingStatsEntry 5 }
cbQosQueueingDiscardPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets, associated with
this class, that were dropped by queueing."
::= { cbQosQueueingStatsEntry 6 }
cbQosQueueingDiscardPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, associated with this class,
that were dropped by queueing."
::= { cbQosQueueingStatsEntry 7 }
cbQosQueueingDiscardPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets, associated with this class,
that were dropped by queueing."
::= { cbQosQueueingStatsEntry 8 }
cbQosTSStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosTSStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies traffic-shaping Action related
Statistical information.
"
::= { cbQosTSStats 1 }
cbQosTSStatsEntry OBJECT-TYPE
SYNTAX CbQosTSStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about traffic-shaping Action. Traffic-shaping
Action specific information you can find in this table are :
various delay/drop pkt/byte counters, state of feature,
and Q size.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex }
::= { cbQosTSStatsTable 1 }
CbQosTSStatsEntry ::= SEQUENCE {
cbQosTSStatsDelayedByteOverflow Counter32,
cbQosTSStatsDelayedByte Counter32,
cbQosTSStatsDelayedByte64 Counter64,
cbQosTSStatsDelayedPktOverflow Counter32,
cbQosTSStatsDelayedPkt Counter32,
cbQosTSStatsDelayedPkt64 Counter64,
cbQosTSStatsDropByteOverflow Counter32,
cbQosTSStatsDropByte Counter32,
cbQosTSStatsDropByte64 Counter64,
cbQosTSStatsDropPktOverflow Counter32,
cbQosTSStatsDropPkt Counter32,
cbQosTSStatsDropPkt64 Counter64,
cbQosTSStatsActive TruthValue,
cbQosTSStatsCurrentQSize Gauge32
}
cbQosTSStatsDelayedByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
octets that have been delayed."
::= { cbQosTSStatsEntry 1 }
cbQosTSStatsDelayedByte OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
octets that have been delayed."
::= { cbQosTSStatsEntry 2 }
cbQosTSStatsDelayedByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
octets that have been delayed."
::= { cbQosTSStatsEntry 3 }
cbQosTSStatsDelayedPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
packets that have been delayed."
::= { cbQosTSStatsEntry 4 }
cbQosTSStatsDelayedPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
packets that have been delayed."
::= { cbQosTSStatsEntry 5 }
cbQosTSStatsDelayedPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
packets that have been delayed."
::= { cbQosTSStatsEntry 6 }
cbQosTSStatsDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
octets that have been dropped during shaping."
::= { cbQosTSStatsEntry 7 }
cbQosTSStatsDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
octets that have been dropped during shaping."
::= { cbQosTSStatsEntry 8 }
cbQosTSStatsDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
octets that have been dropped during shaping."
::= { cbQosTSStatsEntry 9 }
cbQosTSStatsDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the upper 32 bits counter of
packets that have been dropped during shaping."
::= { cbQosTSStatsEntry 10 }
cbQosTSStatsDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lower 32 bits counter of
packets that have been dropped during shaping."
::= { cbQosTSStatsEntry 11 }
cbQosTSStatsDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the 64 bits counter of
packets that have been dropped during shaping."
::= { cbQosTSStatsEntry 12 }
cbQosTSStatsActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current traffic-shaping
state. When traffic-shaping is enabled and the traffic
rate exceeds the shape rate, traffic-shaping
is considered to be active. Otherwise, it is
considered inactive."
::= { cbQosTSStatsEntry 13 }
cbQosTSStatsCurrentQSize OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current traffic-shaping
queue depth in packets."
::= { cbQosTSStatsEntry 14 }
cbQosREDClassStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CbQosREDClassStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per Precedence WRED Action related
Statistical information.
"
::= { cbQosREDClassStats 1 }
cbQosREDClassStatsEntry OBJECT-TYPE
SYNTAX CbQosREDClassStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry in this table describes the statistical
information about per Precedence WRED Action. per Precedence
WRED Action specific information you can find in this table
are : Random pkt/byte counters, and Tail drop pkt/byte
counters.
This table contains per Precedence/dscp based statistical
information only, no configuration information associated
with it. Therefore, it is indexed by the instance specific
IDs, and a per Precedence identifier:
cbQosPolicyIndex, cbQosObjectsIndex and cbQosREDValue.
"
INDEX { cbQosPolicyIndex, cbQosObjectsIndex, cbQosREDValue}
::= { cbQosREDClassStatsTable 1 }
CbQosREDClassStatsEntry ::= SEQUENCE {
cbQosREDRandomDropPktOverflow Counter32,
cbQosREDRandomDropPkt Counter32,
cbQosREDRandomDropPkt64 Counter64,
cbQosREDRandomDropByteOverflow Counter32,
cbQosREDRandomDropByte Counter32,
cbQosREDRandomDropByte64 Counter64,
cbQosREDTailDropPktOverflow Counter32,
cbQosREDTailDropPkt Counter32,
cbQosREDTailDropPkt64 Counter64,
cbQosREDTailDropByteOverflow Counter32,
cbQosREDTailDropByte Counter32,
cbQosREDTailDropByte64 Counter64,
cbQosREDTransmitPktOverflow Counter32,
cbQosREDTransmitPkt Counter32,
cbQosREDTransmitPkt64 Counter64,
cbQosREDTransmitByteOverflow Counter32,
cbQosREDTransmitByte Counter32,
cbQosREDTransmitByte64 Counter64,
cbQosREDECNMarkPktOverflow Counter32,
cbQosREDECNMarkPkt Counter32,
cbQosREDECNMarkPkt64 Counter64,
cbQosREDECNMarkByteOverflow Counter32,
cbQosREDECNMarkByte Counter32,
cbQosREDECNMarkByte64 Counter64,
cbQosREDMeanQSizeUnits CbQosQueueUnitType,
cbQosREDMeanQSize CbQosQueueDepth
}
cbQosREDRandomDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 1 }
cbQosREDRandomDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 2 }
cbQosREDRandomDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 3 }
cbQosREDRandomDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 4 }
cbQosREDRandomDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 5 }
cbQosREDRandomDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 6 }
cbQosREDTailDropPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 7 }
cbQosREDTailDropPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 8 }
cbQosREDTailDropPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 9 }
cbQosREDTailDropByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 10 }
cbQosREDTailDropByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 11 }
cbQosREDTailDropByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the maximum threshold."
::= { cbQosREDClassStatsEntry 12 }
cbQosREDTransmitPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes transmitted."
::= { cbQosREDClassStatsEntry 13 }
cbQosREDTransmitPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes trasmitted."
::= { cbQosREDClassStatsEntry 14 }
cbQosREDTransmitPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets transmitted."
::= { cbQosREDClassStatsEntry 15 }
cbQosREDTransmitByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of octets transmitted."
::= { cbQosREDClassStatsEntry 16 }
cbQosREDTransmitByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of octets trasmitted."
::= { cbQosREDClassStatsEntry 17 }
cbQosREDTransmitByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of octets transmitted."
::= { cbQosREDClassStatsEntry 18 }
cbQosREDECNMarkPktOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of packets ecn marked when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 19 }
cbQosREDECNMarkPkt OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of packets ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 20 }
cbQosREDECNMarkPkt64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of packets ecn marked when the
number of packets in the associated queue was
greater than the minimum threshold and less than
the maximum threshold."
::= { cbQosREDClassStatsEntry 21 }
cbQosREDECNMarkByteOverflow OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The upper 32 bits count of bytes ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 22 }
cbQosREDECNMarkByte OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lower 32 bits count of bytes ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 23 }
cbQosREDECNMarkByte64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The 64 bits count of bytes ecn marked when the
number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."
::= { cbQosREDClassStatsEntry 24 }
cbQosREDMeanQSizeUnits OBJECT-TYPE
SYNTAX CbQosQueueUnitType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the unit type of cbQosREDMeanQSize
object."
::= { cbQosREDClassStatsEntry 25 }
cbQosREDMeanQSize OBJECT-TYPE
SYNTAX CbQosQueueDepth
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average queue size computed and used by the
WRED algorithm."
::= { cbQosREDClassStatsEntry 26 }
ciscocbQosMIBCompliances OBJECT IDENTIFIER
::= { ciscocbQosMIBConformance 1 }
ciscocbQosMIBGroups OBJECT IDENTIFIER
::= { ciscocbQosMIBConformance 2 }
ciscocbQosMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router."
MODULE MANDATORY-GROUPS {
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroup,
cbQosREDCfgGroup,
cbQosREDClassCfgGroup,
cbQosPoliceCfgGroup,
cbQosTSCfgGroup,
cbQosSetCfgGroup,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
::= { ciscocbQosMIBCompliances 1 }
ciscocbQosMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBCompliance."
MODULE MANDATORY-GROUPS {
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev1,
cbQosTSCfgGroup,
cbQosSetCfgGroup,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}
GROUP cbQosInterfacePolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosATMPVCPolicyGroup
DESCRIPTION
"This is a optional group of information"
GROUP cbQosNoBufferDropGroup
DESCRIPTION
"This group is only available for code running on the
7500 platform."
GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION
"This group is only available for code running on the
7200 and/or lower platforms."
::= { ciscocbQosMIBCompliances 2 }
cbQosServicePolicyGroup OBJECT-GROUP
OBJECTS {
cbQosIfType,
cbQosPolicyDirection,
cbQosIfIndex,
cbQosFrDLCI,
cbQosAtmVPI,
cbQosAtmVCI
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 1 }
cbQosInterfacePolicyGroup OBJECT-GROUP
OBJECTS {
cbQosIFPolicyIndex
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 2 }
cbQosFrameRelayVCPolicyGroup OBJECT-GROUP
OBJECTS {
cbQosFRPolicyIndex
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 3 }
cbQosATMPVCPolicyGroup OBJECT-GROUP
OBJECTS {
cbQosATMPolicyIndex
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 4 }
cbQosObjectsGroup OBJECT-GROUP
OBJECTS {
cbQosConfigIndex,
cbQosObjectsType,
cbQosParentObjectsIndex
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 5 }
cbQosPolicyMapCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPolicyMapName,
cbQosPolicyMapDesc
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 6 }
cbQosClassMapCfgGroup OBJECT-GROUP
OBJECTS {
cbQosCMName,
cbQosCMDesc,
cbQosCMInfo
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 7 }
cbQosMatchStmtCfgGroup OBJECT-GROUP
OBJECTS {
cbQosMatchStmtName,
cbQosMatchStmtInfo
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 8 }
cbQosQueueingCfgGroup OBJECT-GROUP
OBJECTS {
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgAggregateQSize,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize
}
STATUS deprecated DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 9 }
cbQosREDCfgGroup OBJECT-GROUP
OBJECTS {
cbQosREDCfgExponWeight,
cbQosREDCfgMeanQsize
}
STATUS deprecated DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 10 }
cbQosREDClassCfgGroup OBJECT-GROUP
OBJECTS {
cbQosREDCfgMinThreshold,
cbQosREDCfgMaxThreshold,
cbQosREDCfgPktDropProb
}
STATUS deprecated DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 11 }
cbQosPoliceCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgConformAction,
cbQosPoliceCfgConformSetValue,
cbQosPoliceCfgExceedAction,
cbQosPoliceCfgExceedSetValue,
cbQosPoliceCfgPir
}
STATUS deprecated DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 12 }
cbQosTSCfgGroup OBJECT-GROUP
OBJECTS {
cbQosTSCfgRate,
cbQosTSCfgBurstSize,
cbQosTSCfgExtBurstSize,
cbQosTSCfgAdaptiveEnabled,
cbQosTSCfgAdaptiveRate,
cbQosTSCfgLimitType
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 13 }
cbQosSetCfgGroup OBJECT-GROUP
OBJECTS {
cbQosSetCfgFeature,
cbQosSetCfgIpDSCPValue,
cbQosSetCfgIpPrecedenceValue,
cbQosSetCfgQosGroupValue,
cbQosSetCfgL2CosValue,
cbQosSetCfgMplsExpValue,
cbQosSetCfgDiscardClassValue
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 14 }
cbQosClassMapStatsGroup OBJECT-GROUP
OBJECTS {
cbQosCMPrePolicyPktOverflow,
cbQosCMPrePolicyPkt,
cbQosCMPrePolicyPkt64,
cbQosCMPrePolicyByteOverflow,
cbQosCMPrePolicyByte,
cbQosCMPrePolicyByte64,
cbQosCMPrePolicyBitRate,
cbQosCMPostPolicyByteOverflow,
cbQosCMPostPolicyByte,
cbQosCMPostPolicyByte64,
cbQosCMPostPolicyBitRate,
cbQosCMDropPktOverflow,
cbQosCMDropPkt,
cbQosCMDropPkt64,
cbQosCMDropByteOverflow,
cbQosCMDropByte,
cbQosCMDropByte64,
cbQosCMDropBitRate
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 15 }
cbQosNoBufferDropGroup OBJECT-GROUP
OBJECTS {
cbQosCMNoBufDropPktOverflow,
cbQosCMNoBufDropPkt,
cbQosCMNoBufDropPkt64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS summary statistics."
::= { ciscocbQosMIBGroups 16 }
cbQosQueueingDynamicQNumberGroup OBJECT-GROUP
OBJECTS {
cbQosQueueingCfgDynamicQNumber
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS Queueing information."
::= { ciscocbQosMIBGroups 17 }
cbQosTrafficShapingDelayCountersGroup OBJECT-GROUP
OBJECTS {
cbQosTSStatsDelayedByteOverflow,
cbQosTSStatsDelayedByte,
cbQosTSStatsDelayedByte64,
cbQosTSStatsDelayedPktOverflow,
cbQosTSStatsDelayedPkt,
cbQosTSStatsDelayedPkt64,
cbQosTSStatsActive
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS traffic-shaping
information."
::= { ciscocbQosMIBGroups 18 }
cbQosMatchStmtStatsGroup OBJECT-GROUP
OBJECTS {
cbQosMatchPrePolicyPktOverflow,
cbQosMatchPrePolicyPkt,
cbQosMatchPrePolicyPkt64,
cbQosMatchPrePolicyByteOverflow,
cbQosMatchPrePolicyByte,
cbQosMatchPrePolicyByte64,
cbQosMatchPrePolicyBitRate
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 19 }
cbQosPoliceStatsGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceConformedPktOverflow,
cbQosPoliceConformedPkt,
cbQosPoliceConformedPkt64,
cbQosPoliceConformedByteOverflow,
cbQosPoliceConformedByte,
cbQosPoliceConformedByte64,
cbQosPoliceConformedBitRate,
cbQosPoliceExceededPktOverflow,
cbQosPoliceExceededPkt,
cbQosPoliceExceededPkt64,
cbQosPoliceExceededByteOverflow,
cbQosPoliceExceededByte,
cbQosPoliceExceededByte64,
cbQosPoliceExceededBitRate
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 20 }
cbQosQueueingStatsGroup OBJECT-GROUP
OBJECTS {
cbQosQueueingCurrentQDepth,
cbQosQueueingMaxQDepth,
cbQosQueueingDiscardByteOverflow,
cbQosQueueingDiscardByte,
cbQosQueueingDiscardByte64,
cbQosQueueingDiscardPktOverflow,
cbQosQueueingDiscardPkt,
cbQosQueueingDiscardPkt64
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 21 }
cbQosTSStatsGroup OBJECT-GROUP
OBJECTS {
cbQosTSStatsDropByteOverflow,
cbQosTSStatsDropByte,
cbQosTSStatsDropByte64,
cbQosTSStatsDropPktOverflow,
cbQosTSStatsDropPkt,
cbQosTSStatsDropPkt64,
cbQosTSStatsCurrentQSize
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 22 }
cbQosREDClassStatsGroup OBJECT-GROUP
OBJECTS {
cbQosREDRandomDropPktOverflow,
cbQosREDRandomDropPkt,
cbQosREDRandomDropPkt64,
cbQosREDRandomDropByteOverflow,
cbQosREDRandomDropByte,
cbQosREDRandomDropByte64,
cbQosREDTailDropPktOverflow,
cbQosREDTailDropPkt,
cbQosREDTailDropPkt64,
cbQosREDTailDropByteOverflow,
cbQosREDTailDropByte,
cbQosREDTailDropByte64,
cbQosREDMeanQSizeUnits,
cbQosREDMeanQSize
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 23 }
cbQosREDClassXmitCountersGroup OBJECT-GROUP
OBJECTS {
cbQosREDTransmitPktOverflow,
cbQosREDTransmitPkt,
cbQosREDTransmitPkt64,
cbQosREDTransmitByteOverflow,
cbQosREDTransmitByte,
cbQosREDTransmitByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 24 }
cbQosAFPoliceStatsGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceViolatedPktOverflow,
cbQosPoliceViolatedPkt,
cbQosPoliceViolatedPkt64,
cbQosPoliceViolatedByteOverflow,
cbQosPoliceViolatedByte,
cbQosPoliceViolatedByte64,
cbQosPoliceViolatedBitRate
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 25 }
cbQosAFPoliceCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgViolateAction,
cbQosPoliceCfgViolateSetValue
}
STATUS deprecated
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 26 }
cbQosREDDscpCfgGroup OBJECT-GROUP
OBJECTS {
cbQosREDCfgDscpPrec
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 27 }
cbQosNewSetCfgGroup OBJECT-GROUP
OBJECTS {
cbQosSetCfgL2CosValue
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 28 }
cbQosQueueingCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize,
cbQosQueueingCfgQLimitUnits,
cbQosQueueingCfgAggregateQLimit
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 29 }
cbQosREDCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosREDCfgExponWeight
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 30 }
cbQosREDClassCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosREDCfgPktDropProb,
cbQosREDClassCfgThresholdUnit,
cbQosREDClassCfgMinThreshold,
cbQosREDClassCfgMaxThreshold
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 31 }
cbQosPoliceCfgGroupRev1 OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgPir
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 32 }
cbQosPoliceActionCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceActionCfgConform,
cbQosPoliceActionCfgConformSetValue,
cbQosPoliceActionCfgExceed,
cbQosPoliceActionCfgExceedSetValue
}
STATUS current
DESCRIPTION
"Required objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 33 }
cbQosAFPoliceViolateCfgGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceActionCfgViolate,
cbQosPoliceActionCfgViolateSetValue
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 34 }
cbQosREDECNCfgGroup OBJECT-GROUP
OBJECTS {
cbQosREDCfgECNEnabled
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 35 }
cbQosREDClassECNMarkCountersGroup OBJECT-GROUP
OBJECTS {
cbQosREDECNMarkPktOverflow,
cbQosREDECNMarkPkt,
cbQosREDECNMarkPkt64,
cbQosREDECNMarkByteOverflow,
cbQosREDECNMarkByte,
cbQosREDECNMarkByte64
}
STATUS current
DESCRIPTION
"Optional objects to provide CB QoS objects configuration
information."
::= { ciscocbQosMIBGroups 36 }
cbQosPoliceCfgExtGroup OBJECT-GROUP
OBJECTS {
cbQosPoliceCfgRate64
}
STATUS current
DESCRIPTION
"Optional objects to provide the information of the
committed policing rate that is greater than the
maximum value reportable by cbQosPoliceCfgRate."
::= { ciscocbQosMIBGroups 37 }
END