CISCO-IF-CAPABILITY DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY
FROM SNMPv2-SMI
AGENT-CAPABILITIES
FROM SNMPv2-CONF
DisplayString,
TruthValue
FROM SNMPv2-TC
ciscoAgentCapability
FROM CISCO-SMI;
ciscoIfCapability MODULE-IDENTITY
LAST-UPDATED "200402200000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-snmp@cisco.com"
DESCRIPTION
"Agent capabilities for IF-MIB"
REVISION "200402200000Z"
DESCRIPTION
"Added ciscoIfCapabilityV5R00 agent capabilities for MGX
product series: MPSM Service Module and VXSM (Voice Switch
Service Module."
REVISION "200303140000Z"
DESCRIPTION
"Added following Agent capabilities for MGX product series:
- ciscoIfCapabilityV4R00 for
AXSM 10 Gig. Module (AXSM-XG) and
AXSM Enhanced Module (AXSM-E)."
REVISION "200206120000Z"
DESCRIPTION
"Added following Agent capabilities for MGX product series:
- ciscoIfCapabilityPxmVR200 for
PXM(Processor Switch Module) Module
- ciscoIfCapabilityAxsmVR200 for
AXSM(ATM Switch Service Module)
- ciscoIfCapabilityAxsmeV21R60 for
AXSM Enhanced Module.
- ciscoIfCapabilityFrsm12V3R00 for
Frame Relay Service Module(FRSM-12)."
REVISION "200002090000Z"
DESCRIPTION
"Modification of ifCounterDiscontinuityTime,
ifTableLastChange object and LinkUp/Down trap
objects."
REVISION "9811160000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoAgentCapability 125 }
ciscoIfCapabilityV11R03 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco IOS 11.3"
STATUS current
DESCRIPTION "IF MIB capabilities"
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup, ifStackGroup2,
ifFixedLengthGroup, ifHCFixedLengthGroup,
ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup,
ifRcvAddressGroup, ifOldObjectsGroup }
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
ACCESS read-write
DESCRIPTION "Can not be written in case of atm/aal5
sublayers on an ATM end system, LEC subinterfaces,
aal5 sublayer of an ATM switch CPU interface,
ATM 2000 physical interface and lex based interfaces
used for accounting."
VARIATION ifOperStatus
SYNTAX INTEGER {
up(1),
down(2),
testing(3),
unknown(4),
dormant(5)
}
DESCRIPTION "Unable to detect all states."
VARIATION ifLastChange
ACCESS read-only
DESCRIPTION "Supported in physical interfaces, lex based interfaces
used for accounting. In case of subinterfaces, the value
returned will be the sysuptime when the subinterface
registered with ifmib."
VARIATION ifInOctets
ACCESS read-only
DESCRIPTION "Not supported in atm sublayer on an ATM end system.
Supported in physical interfaces, lex based interfaces,
aal5 sublayer of an ATM switch CPU interface,
aal5 sublayer on the atm interfaces of an ATM
end system, AIP type aal5 sublayer on an ATM
end system and in frame-relay, x25,
aflane subinterfaces."
VARIATION ifInUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface, aflane sublayers."
VARIATION ifInNUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifInDiscards
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface, aflane sublayers."
VARIATION ifInErrors
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface, aflane sublayers."
VARIATION ifInUnknownProtos
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical
interfaces, lex based interfaces, aal5
sublayer of an ATM switch CPU interface,
aflane sublayers."
VARIATION ifOutOctets
ACCESS read-only
DESCRIPTION "Not supported in atm sublayer on an ATM end system.
Supported in physical interfaces, lex based interfaces,
aal5 sublayer of an ATM switch CPU interface,
aal5 sublayer on the atm interfaces of an ATM
end system, AIP type aal5 sublayer on an ATM
end system and in frame-relay, x25,
aflane subinterfaces."
VARIATION ifOutUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface, aflane sublayers."
VARIATION ifOutNUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces, lex based accounting
interfaces and in aflane subinterfaces."
VARIATION ifOutDiscards
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface, aflane sublayers."
VARIATION ifOutErrors
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface, aflane sublayers."
VARIATION ifOutQLen
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifSpecific
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifInMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifInBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifOutMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifOutBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCInOctets
ACCESS read-only
DESCRIPTION "Supported in LEC sublayers only."
VARIATION ifHCInUcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCInMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCInBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutOctets
ACCESS read-only
DESCRIPTION "Supported in LEC sublayers only."
VARIATION ifHCOutUcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-write
DESCRIPTION "Only physical interfaces can have link traps enabled.
Hardwired on subinterfaces and on lex based interfaces
used for accounting to be false."
VARIATION ifPromiscuousMode
SYNTAX TruthValue
ACCESS read-only
DESCRIPTION "Not writable, hardcoded to false (2)."
VARIATION ifConnectorPresent
ACCESS read-only
DESCRIPTION "Hardcoded to be true for controller
type sub-interfaces and to be false for
all other sub-interfaces."
VARIATION ifAlias
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
DESCRIPTION "For interfaces that are not being nv written,
the ifAlias value is lost when the system is
reloaded."
VARIATION ifCounterDiscontinuityTime
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifStackStatus
SYNTAX INTEGER { active(1) } ACCESS read-only
DESCRIPTION "Write/create not supported.
Unable to detect all states."
VARIATION ifRcvAddressAddress
DESCRIPTION "Read-only access is added to this object.
Supported in physical interfaces, lex based
interfaces and in lec sublayers."
VARIATION ifRcvAddressStatus
SYNTAX INTEGER { active(1) } ACCESS read-only
DESCRIPTION "Write/create not supported. Unable to detect
all states. Supported in physical interfaces,
lex based interfaces and in lec sublayers."
VARIATION ifRcvAddressType
SYNTAX INTEGER { other(1) }
ACCESS read-only
DEFVAL { other }
DESCRIPTION "Write/create not supported. Unable to detect
all states. Default value is { other }.
Supported in physical interfaces,
lex based interfaces and in lec sublayers."
VARIATION ifTestId
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestStatus
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestType
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestResult
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestCode
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestOwner
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION linkUp DESCRIPTION "A linkUp trap signifies that the sending
protocol entity recognizes that one of the
communication links represented in the agent's
configuration has come up."
VARIATION linkDown DESCRIPTION "A linkDown trap signifies that the sending
protocol entity recognizes a failure in one of
the communication links represented in the
agent's configuration."
::= { ciscoIfCapability 1 }
ciscoIfCapabilityV12R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco IOS 12.0"
STATUS current
DESCRIPTION "IF MIB capabilities"
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup, ifStackGroup2,
ifFixedLengthGroup, ifHCFixedLengthGroup,
ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup,
ifRcvAddressGroup, ifOldObjectsGroup
}
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
ACCESS read-write
DESCRIPTION "Can not be written in case of atm/aal5 sublayers
on an ATM end system, LEC subinterfaces, aal5
sublayer of an ATM switch CPU interface, ATM 2000
physical interface and lex based interfaces used
for accounting."
VARIATION ifOperStatus
SYNTAX INTEGER { up(1), down(2), testing(3),
unknown(4), dormant(5) }
DESCRIPTION "Unable to detect all states."
VARIATION ifLastChange
ACCESS read-only
DESCRIPTION "Supported in physical interfaces, lex based interfaces
used for accounting and in cable, mc3810_dsx1, voice
subinterfaces."
VARIATION ifInOctets
ACCESS read-only
DESCRIPTION "Not supported in atm sublayer on an ATM
end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an
ATM switch CPU interface, aal5 sublayer on
the atm interfaces of an ATM end system,
AIP type aal5 sublayer on an ATM end system and in
frame-relay, x25, aflane, cable subinterfaces."
VARIATION ifInUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane, cable
subinterfaces."
VARIATION ifInNUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifInDiscards
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifInErrors
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifInUnknownProtos
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutOctets
ACCESS read-only
DESCRIPTION "Not supported in atm sublayer on an ATM end system.
Supported in physical interfaces, lex based interfaces,
aal5 sublayer of an ATM switch CPU interface,
aal5 sublayer on the atm interfaces of an ATM
end system, AIP type aal5 sublayer on an ATM
end system and in frame-relay, x25, aflane,
cable subinterfaces."
VARIATION ifOutUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutNUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces, lex based accounting
interfaces and in aflane subinterfaces."
VARIATION ifOutDiscards
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutErrors
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutQLen
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifSpecific
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifInMulticastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifInBroadcastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifOutMulticastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifOutBroadcastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifHCInOctets
ACCESS read-only
DESCRIPTION "Supported in physical interfaces and
LEC sub-layers."
VARIATION ifHCInUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces."
VARIATION ifHCInMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCInBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutOctets
ACCESS read-only
DESCRIPTION "Supported in physical interfaces and
in LEC sub-layers."
VARIATION ifHCOutUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces."
VARIATION ifHCOutMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-write
DESCRIPTION "Physical interfaces and subinterfaces can have link
traps enabled. Write not supported in lex based
interfaces used for accounting and the object is
hardwired to be false."
VARIATION ifPromiscuousMode
SYNTAX TruthValue
ACCESS read-only
DESCRIPTION "Not writable, hardcoded to false (2)."
VARIATION ifConnectorPresent
ACCESS read-only
DESCRIPTION "Hardcoded to be false on lex based interfaces
used for accounting."
VARIATION ifAlias
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
DESCRIPTION "For interfaces that are not being nv written,
the ifAlias value is lost when the system
is reloaded."
VARIATION ifCounterDiscontinuityTime
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifStackStatus
SYNTAX INTEGER { active(1) } ACCESS read-only
DESCRIPTION "Write/create not supported.
Unable to detect all states."
VARIATION ifRcvAddressAddress
DESCRIPTION "Read-only access is added to this object.
Supported in physical interfaces,
lex based interfaces and in lec
sublayers."
VARIATION ifRcvAddressStatus
SYNTAX INTEGER { active(1) } ACCESS read-only
DESCRIPTION "Write/create not supported. Unable to
detect all states. Supported in physical
interfaces, lex based interfaces and in
lec sublayers."
VARIATION ifRcvAddressType
SYNTAX INTEGER { other(1) }
ACCESS read-only
DEFVAL { other }
DESCRIPTION "Write/create not supported. Unable to detect
all states. Default value is { other }.
Supported in physical interfaces, lex based
interfaces and in lec sublayers."
VARIATION ifTestId
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestStatus
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestType
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestResult
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestCode
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestOwner
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION linkUp DESCRIPTION "A linkUp trap signifies that the sending
protocol entity recognizes that one of the
communication links represented in the agent's
configuration has come up."
VARIATION linkDown DESCRIPTION "A linkDown trap signifies that the sending
protocol entity recognizes a failure in one of
the communication links represented in the
agent's configuration."
::= { ciscoIfCapability 2 }
ciscoIfCapabilityV12R01T AGENT-CAPABILITIES
PRODUCT-RELEASE "Cisco IOS 12.1T"
STATUS current
DESCRIPTION "IF MIB capabilities"
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup, ifStackGroup2,
ifFixedLengthGroup, ifHCFixedLengthGroup,
ifPacketGroup, ifHCPacketGroup, ifVHCPacketGroup,
ifRcvAddressGroup, ifOldObjectsGroup
}
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "OIR instances need to be modified"
VARIATION ifAdminStatus
ACCESS read-write
DESCRIPTION "Can not be written in case of atm/aal5 sublayers
on an ATM end system, LEC subinterfaces, aal5
sublayer of an ATM switch CPU interface, ATM 2000
physical interface and lex based interfaces
used for accounting."
VARIATION ifOperStatus
SYNTAX INTEGER { up(1), down(2), testing(3),
unknown(4), dormant(5) }
DESCRIPTION "Unable to detect all states."
VARIATION ifLastChange
ACCESS read-only
DESCRIPTION "Supported in physical interfaces, lex based
interfaces used for accounting and in cable,
mc3810_dsx1, voice subinterfaces."
VARIATION ifInOctets
ACCESS read-only
DESCRIPTION "Not supported in atm sublayer on an ATM end system.
Supported in physical interfaces, lex based interfaces,
aal5 sublayer of an ATM switch CPU interface,
aal5 sublayer on the atm interfaces of an ATM
end system, AIP type aal5 sublayer on an ATM
end system and in frame-relay, x25,
aflane, cable subinterfaces."
VARIATION ifInUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifInNUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifInDiscards
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifInErrors
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifInUnknownProtos
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutOctets
ACCESS read-only
DESCRIPTION "Not supported in atm sublayer on an ATM end system.
Supported in physical interfaces, lex based interfaces,
aal5 sublayer of an ATM switch CPU interface,
aal5 sublayer on the atm interfaces of an
ATM end system, AIP type aal5 sublayer on an
ATM end system and in frame-relay, x25,
aflane, cable subinterfaces."
VARIATION ifOutUcastPkts
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutNUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces, lex based
accounting interfaces and in aflane subinterfaces."
VARIATION ifOutDiscards
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutErrors
ACCESS read-only
DESCRIPTION "Not supported in frame-relay subinterfaces,
x25 subinterfaces, atm/aal5 sublayers on an
ATM end system. Supported in physical interfaces,
lex based interfaces, aal5 sublayer of an ATM
switch CPU interface and in aflane,
cable subinterfaces."
VARIATION ifOutQLen
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifSpecific
ACCESS read-only
DESCRIPTION "Not supported in subinterfaces."
VARIATION ifInMulticastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifInBroadcastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifOutMulticastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifOutBroadcastPkts
ACCESS read-only
DESCRIPTION "Supported in cable subinterface."
VARIATION ifHCInOctets
ACCESS read-only
DESCRIPTION "Supported in physical interfaces and
LEC sub-layers."
VARIATION ifHCInUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces."
VARIATION ifHCInMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCInBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutOctets
ACCESS read-only
DESCRIPTION "Supported in physical interfaces and
in LEC sub-layers."
VARIATION ifHCOutUcastPkts
ACCESS read-only
DESCRIPTION "Supported in physical interfaces."
VARIATION ifHCOutMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifHCOutBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-write
DESCRIPTION "Physical interfaces and subinterfaces can have link
traps enabled. Write not supported in lex based
interfaces used for accounting and the object is
hardwired to be false."
VARIATION ifPromiscuousMode
SYNTAX TruthValue
ACCESS read-only
DESCRIPTION "Not writable, hardcoded to false (2)."
VARIATION ifConnectorPresent
ACCESS read-only
DESCRIPTION "Hardcoded to be false on lex based
interfaces used for accounting."
VARIATION ifAlias
SYNTAX DisplayString (SIZE(0..64))
ACCESS read-write
DESCRIPTION "For interfaces that are not being nv written,
the ifAlias value is lost when the system
is reloaded."
VARIATION ifStackStatus
SYNTAX INTEGER { active(1) } ACCESS read-only
DESCRIPTION "Write/create not supported.
Unable to detect all states."
VARIATION ifRcvAddressAddress
DESCRIPTION "Read-only access is added to this object.
Supported in physical interfaces, lex based
interfaces and in lec sublayers."
VARIATION ifRcvAddressStatus
SYNTAX INTEGER { active(1) } ACCESS read-only
DESCRIPTION "Write/create not supported. Unable to detect
all states. Supported in physical interfaces,
lex based interfaces and in lec sublayers."
VARIATION ifRcvAddressType
SYNTAX INTEGER { other(1) }
ACCESS read-only
DEFVAL { other }
DESCRIPTION "Write/create not supported. Unable to detect
all states. Default value is { other }.
Supported in physical interfaces,
lex based interfaces and in lec sublayers."
VARIATION ifTestId
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestStatus
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestType
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestResult
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestCode
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION ifTestOwner
ACCESS not-implemented
DESCRIPTION "Table for ifTestEntry not supported."
VARIATION linkUp DESCRIPTION "A linkUp trap signifies that the sending
protocol entity recognizes that one of the
communication links represented in the agent's
configuration has come up. When a new config
command 'snmp-server trap link ietf' is set, the
varbind list is made of objects specified here.
Otherwise, the varbind list defined in the
previous version holds good. For sub-interfaces,
as there is no support for locIfReason, it will
be omitted from the trap message."
VARIATION linkDown DESCRIPTION "A linkDown trap signifies that the sending
protocol entity recognizes a failure in one of
the communication links represented in the
agent's configuration. When a new config
command 'snmp-server trap link ietf' is set, the
varbind list is made of objects specified here.
Otherwise, the varbind list defined in the
previous version holds good. For sub-interfaces,
as there is no support for locIfReason, it will
be omitted from the trap message."
::= { ciscoIfCapability 3 }
ciscoIfCapabilityPxmVR200 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.00,BPX SES Release 1.00."
STATUS current
DESCRIPTION "IF MIB capabilities for PXM45, PXM1 Modules."
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup, ifPacketGroup }
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
DESCRIPTION "This object can not be written in case of
rs232 interface identified by ifType
value rs232(33)."
VARIATION ifOperStatus
SYNTAX INTEGER { up(1), down(2), testing(3) }
DESCRIPTION "Unable to detect all states."
VARIATION ifLastChange
DESCRIPTION "The value does not reflect the change in
the operational status of the interface.
The value zero is returned."
VARIATION ifInOctets
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifInUcastPkts
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifInDiscards
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifInErrors
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifInUnknownProtos
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifOutOctets
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifOutUcastPkts
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifOutDiscards
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifOutErrors
DESCRIPTION "Supported only for following interfaces:
Ethernet interface (ifType = ethernetCsmacd(6))
Loopback interfce (ifType = softwareLoopback(24))
SLIP Interface (ifType = slip(28))."
VARIATION ifInMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifInBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifOutMulticastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifOutBroadcastPkts
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-only
DEFVAL { disabled }
DESCRIPTION "Write operation not supported."
VARIATION ifPromiscuousMode
ACCESS read-only
DEFVAL { false }
DESCRIPTION "Write operation not supported."
VARIATION ifAlias
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoIfCapability 4 }
ciscoIfCapabilityAxsmVR200 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.00."
STATUS current
DESCRIPTION "IF MIB capabilities for ATM Switch Service
Module(AXSM)."
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup }
VARIATION ifNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifPhysAddress
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
DESCRIPTION "This object can not be written in case of
atm interface identified by ifType value atm(37).
Does not support testing(3)."
VARIATION ifOperStatus
SYNTAX INTEGER { up(1), down(2), notPresent(6) }
DESCRIPTION "Unable to detect all states.
Does not support testing(3),unknown(4),
dormant(5),lowerLayerDown(7)."
VARIATION ifLastChange
DESCRIPTION "The value does not reflect the change in
the operational status of the interface.
The value zero is returned."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-only
DEFVAL { disabled }
DESCRIPTION "Write operation not supported."
VARIATION ifAlias
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoIfCapability 5 }
ciscoIfCapabilityAxsmeV21R60 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 2.1.60"
STATUS current
DESCRIPTION "IF MIB capabilities for Enhanced ATM
Switch Service Module (AXSM-E)."
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup }
VARIATION ifNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifPhysAddress
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
DESCRIPTION "Does not support testing(3)."
VARIATION ifOperStatus
SYNTAX INTEGER {
up(1),
down(2),
notPresent(6),
lowerLayerDown(7)
}
DESCRIPTION "Unable to detect all states.
Does not support testing(3),
unknown(4), dormant(5)."
VARIATION ifLastChange
DESCRIPTION "The value does not reflect the change in
the operational status of the interface.
The value zero is returned."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-only
DEFVAL { disabled }
DESCRIPTION "Write operation not supported."
VARIATION ifAlias
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoIfCapability 6 }
ciscoIfCapabilityFrsm12V3R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 3.0.00"
STATUS current
DESCRIPTION "IF MIB capabilities for
Frame Relay Service Module(FRSM-12)."
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup }
VARIATION ifNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifPhysAddress
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
DESCRIPTION "Does not support testing(3)."
VARIATION ifOperStatus
SYNTAX INTEGER {
up(1),
down(2),
notPresent(6),
lowerLayerDown(7)
}
DESCRIPTION "Unable to detect all states.
Does not support testing(3),
unknown(4), dormant(5)."
VARIATION ifLastChange
DESCRIPTION "The value does not reflect the change in
the operational status of the interface.
The value zero is returned."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-only
DEFVAL { disabled }
DESCRIPTION "Write operation not supported."
VARIATION ifAlias
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoIfCapability 7 }
ciscoIfCapabilityV4R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8950, MGX8850 Release 4.0.00"
STATUS current
DESCRIPTION "IF MIB capabilities for 10 Gig. ATM
Switch Service Module (AXSM-XG) and
Enhanced ATM Switch Service Module
(AXSM-E)."
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup }
VARIATION ifOperStatus
SYNTAX INTEGER {
up(1),
down(2),
testing(3),
notPresent(6),
lowerLayerDown(7)
}
DESCRIPTION "Only subset of values supported.
Following values not supported:
unknown(4), dormant(5)."
VARIATION ifOperStatus
SYNTAX INTEGER {
up(1),
down(2),
notPresent(6),
lowerLayerDown(7)
}
DESCRIPTION "Only subset of values supported.
Following values not supported:
testing(3), unknown(4), dormant(5)."
VARIATION ifNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifPhysAddress
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
DESCRIPTION "Does not support testing(3)."
VARIATION ifLastChange
DESCRIPTION "The value does not reflect the change in
the operational status of the interface.
The value zero is returned."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-only
DEFVAL { disabled }
DESCRIPTION "Write operation not supported."
VARIATION ifAlias
ACCESS not-implemented
DESCRIPTION "Not supported."
::= { ciscoIfCapability 8 }
ciscoIfCapabilityV5R00 AGENT-CAPABILITIES
PRODUCT-RELEASE "MGX8850 Release 5.0.0"
STATUS current
DESCRIPTION "IF MIB capabilities for Voice Switch
Service Module (VXSM) and MPSM in
release 5.0.0"
SUPPORTS IF-MIB
INCLUDES { ifGeneralInformationGroup }
VARIATION ifTableLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifPhysAddress
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifNumber
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifAdminStatus
SYNTAX INTEGER { up(1), down(2) }
DESCRIPTION "For ifType propAtm (197), only up(1) is supported.
This object is not supported if the
ifType is sonetVT(51)."
VARIATION ifOperStatus
SYNTAX INTEGER { up (1),
down (2)
}
DESCRIPTION "For ifType propAtm (197), not all states
can be detected.
This object is not supported if the ifType
is sonetVT(51) or propAtm (197)."
VARIATION ifOperStatus
SYNTAX INTEGER { up (1),
down (2),
testing(3),
notPresent(6),
lowerLayerDown(7)
}
DESCRIPTION "For ifType propAtm (197), not all states
can be detected.
For ifType sonetVT(51) only up(1), down(2) and
lowerLayerDown(7) are detected."
VARIATION ifLastChange
ACCESS not-implemented
DESCRIPTION "Not supported."
VARIATION ifLastChange
DESCRIPTION "The value does not reflect the change in
the operational status of the interface.
The value zero is returned."
VARIATION ifLinkUpDownTrapEnable
ACCESS read-only
DEFVAL { disabled }
DESCRIPTION "Write operation not supported."
::= { ciscoIfCapability 9 }
END