CISCO-VOICE-COMMON-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
callActiveSetupTime,
callActiveIndex
FROM DIAL-CONTROL-MIB
cCallHistoryIndex
FROM CISCO-DIAL-CONTROL-MIB
ciscoExperiment
FROM CISCO-SMI;
ciscoVoiceCommonDialControlMIB MODULE-IDENTITY
LAST-UPDATED "9906180000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-voice@cisco.com"
DESCRIPTION
"This MIB module contains voice related objects that
are common across more than one network
encapsulation i.e VoIP, VoATM and VoFR."
::= { ciscoExperiment 55 }
cvCommonDcMIBObjects OBJECT IDENTIFIER ::=
{ ciscoVoiceCommonDialControlMIB 1 }
cvCommonDcCallActive OBJECT IDENTIFIER ::=
{ cvCommonDcMIBObjects 1 }
cvCommonDcCallHistory OBJECT IDENTIFIER ::=
{ cvCommonDcMIBObjects 2 }
CvcSpeechCoderRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This object specifies the most desirable codec of speech
for the VoIP, VoATM or VoFR peer.
g729r8000 - pre-IETF G.729 8000 bps
g729Ar8000 - G.729 ANNEX-A 8000 bps
g726r16000 - G.726 16000 bps
g726r24000 - G.726 24000 bps
g726r32000 - G.726 32000 bps
g711ulawr64000 - G.711 u-Law 64000 bps
g711Alawr64000 - G.711 A-Law 64000 bps
g728r16000 - G.728 16000 bps
g723r6300 - G.723.1 6300 bps
g723r5300 - G.723.1 5300 bps
gsmr13200 - GSM Full rate 13200 bps
g729Br8000 - G.729 ANNEX-B 8000 bps
g729ABr8000 - G.729 ANNEX-A & B 8000 bps
g723Ar6300 - G723.1 Annex A 6300 bps
g723Ar5300 - G723.1 Annex A 5300 bps
g729IETFr8000 - IETF G.729 8000 bps
"
SYNTAX INTEGER {
g729r8000 (1),
g729Ar8000 (2),
g726r16000 (3),
g726r24000 (4),
g726r32000 (5),
g711ulawr64000 (6),
g711Alawr64000 (7),
g728r16000 (8),
g723r6300 (9),
g723r5300 (10),
gsmr13200 (11),
g729Br8000 (12),
g729ABr8000 (13),
g723Ar6300 (14),
g723Ar5300 (15),
g729IETFr8000 (16)
}
CvcFaxTransmitRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" This object specifies the default transmit rate of FAX
for the VoIP, VoATM or VOFR peer. If the value of this
object is 'none', then the Fax relay feature is disabled
; otherwise the Fax relay feature is enabled.
none - Fax relay is disabled.
voiceRate - the fastest possible fax rate not exceed
the configured voice rate.
fax2400 - 2400 bps FAX transmit rate.
fax4800 - 4800 bps FAX transmit rate.
fax7200 - 7200 bps FAX transmit rate.
fax9600 - 9600 bps FAX transmit rate.
fax14400 - 14400 bps FAX transmit rate.
fax12000 - 12000 bps FAX transmit rate.
"
SYNTAX INTEGER {
none (1),
voiceRate (2),
fax2400 (3),
fax4800 (4),
fax7200 (5),
fax9600 (6),
fax14400 (7),
fax12000 (8)
}
CvcCoderTypeRate ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the coder type-rate for voice/fax compression
used during a call.
other - none of the following.
fax2400 - FAX 2400 bps
fax4800 - FAX 4800 bps
fax7200 - FAX 7200 bps
fax9600 - FAX 9600 bps
fax14400 - FAX 14400 bps
fax12000 - FAX 12000 bps
g729r8000 - G.729 8000 bps (pre-IETF bit ordering)
g729Ar8000 - G.729 ANNEX-A 8000 bps
g726r16000 - G.726 16000 bps
g726r24000 - G.726 24000 bps
g726r32000 - G.726 32000 bps
g711ulawr64000 - G.711 u-Law 64000 bps
g711Alawr64000 - G.711 A-Law 64000 bps
g728r16000 - G.728 16000 bps
g723r6300 - G.723.1 6300 bps
g723r5300 - G.723.1 5300 bps
gsmr13200 - GSM full rate 13200 bps
g729Br8000 - G.729 ANNEX-B 8000 bps
g729ABr8000 - G.729 ANNEX-A & B 8000 bps
g723Ar6300 - G723.1 Annex A 6300 bps
g723Ar5300 - G723.1 Annex A 5300 bps
ietfg729r8000 - G.729 8000 bps (IETF bit ordering)
"
SYNTAX INTEGER {
other (1),
fax2400 (2),
fax4800 (3),
fax7200 (4),
fax9600 (5),
fax14400 (6),
fax12000 (7),
g729r8000 (10),
g729Ar8000 (11),
g726r16000 (12),
g726r24000 (13),
g726r32000 (14),
g711ulawr64000 (15),
g711Alawr64000 (16),
g728r16000 (17),
g723r6300 (18),
g723r5300 (19),
gsmr13200 (20),
g729Br8000 (21),
g729ABr8000 (22),
g723Ar6300 (23),
g723Ar5300 (24),
ietfg729r8000 (25)
}
CvcGUid ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents a Global Call Identifier.
The global call identifier is used as an unique identifier
for an end-to-end call.
A zero length CvcGUid indicates no value for the global call
identifier.
"
SYNTAX OCTET STRING (SIZE (0..16))
CvcInBandSignaling ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the type of in-band signaling used between the
two end points of the call and is used to inform the
router how intepret the ABCD signaling data bits passed
as part of the voice payload data.
cas - specifies intepret the signaling bits as
North American Channel Associated signaling.
none - specifies no in-band signaling or signaling
is being done via an external method (e.g
CCS).
cept - specifies interpret the signaling bits as
MELCAS
transparent - specifies do not interpret or translate the
signaling bits.
"
SYNTAX INTEGER {
cas (1),
none (2),
cept (3),
transparent (4)
}
cvCommonDcCallActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCommonDcCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a common extension to the call active table of
IETF Dial Control MIB. It contains common call leg information
about a network call leg."
::= { cvCommonDcCallActive 1 }
cvCommonDcCallActiveEntry OBJECT-TYPE
SYNTAX CvCommonDcCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The common information regarding a single network call leg.
The call leg entry is identified by using the same index
objects
that are used by Call Active table of IETF Dial Control MIB to
identify the call.
An entry of this table is created when its associated call
active entry in the IETF Dial Control MIB is created and the
call active entry contains information for the call
establishment to a network dialpeer.
The entry is deleted when its associated call active entry in
the IETF Dial Control MIB is deleted."
INDEX { callActiveSetupTime, callActiveIndex }
::= { cvCommonDcCallActiveTable 1 }
CvCommonDcCallActiveEntry ::=
SEQUENCE {
cvCommonDcCallActiveConnectionId CvcGUid,
cvCommonDcCallActiveVADEnable TruthValue,
cvCommonDcCallActiveCoderTypeRate CvcCoderTypeRate,
cvCommonDcCallActiveCodecBytes INTEGER,
cvCommonDcCallActiveInBandSignaling CvcInBandSignaling
}
cvCommonDcCallActiveConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier for the network call."
::= { cvCommonDcCallActiveEntry 1 }
cvCommonDcCallActiveVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the VAD (Voice Activity
Detection) is enabled for the voice call."
::= { cvCommonDcCallActiveEntry 2 }
cvCommonDcCallActiveCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the call.
This rate is different from the configuration rate because of
rate negotiation during the call."
::= { cvCommonDcCallActiveEntry 3 }
cvCommonDcCallActiveCodecBytes OBJECT-TYPE
SYNTAX INTEGER (10..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the payload size of the voice packet."
::= { cvCommonDcCallActiveEntry 4 }
cvCommonDcCallActiveInBandSignaling OBJECT-TYPE
SYNTAX CvcInBandSignaling
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of in-band signaling being used on the call."
::= { cvCommonDcCallActiveEntry 5 }
cvCommonDcCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvCommonDcCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the Common extension to the call history table of
IETF Dial Control MIB. It contains Common call leg information
about a network call leg."
::= { cvCommonDcCallHistory 1 }
cvCommonDcCallHistoryEntry OBJECT-TYPE
SYNTAX CvCommonDcCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The common information regarding a single network call leg.
The call leg entry is identified by using the same index
objects that are used by Call Active table of IETF Dial
Control MIB to identify the call.
An entry of this table is created when its associated call
history entry in the IETF Dial Control MIB is created and the
call history entry contains information for the call
establishment to a network dialpeer.
The entry is deleted when its associated call history entry in
the IETF Dial Control MIB is deleted."
INDEX { cCallHistoryIndex }
::= { cvCommonDcCallHistoryTable 1 }
CvCommonDcCallHistoryEntry ::=
SEQUENCE {
cvCommonDcCallHistoryConnectionId CvcGUid,
cvCommonDcCallHistoryVADEnable TruthValue,
cvCommonDcCallHistoryCoderTypeRate CvcCoderTypeRate,
cvCommonDcCallHistoryCodecBytes INTEGER,
cvCommonDcCallHistoryInBandSignaling CvcInBandSignaling
}
cvCommonDcCallHistoryConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier for the gateway call."
::= { cvCommonDcCallHistoryEntry 1 }
cvCommonDcCallHistoryVADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object indicates whether or not the VAD (Voice Activity
Detection) was enabled for the voice call."
::= { cvCommonDcCallHistoryEntry 2 }
cvCommonDcCallHistoryCoderTypeRate OBJECT-TYPE
SYNTAX CvcCoderTypeRate
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit rate of
voice/fax compression to its associated call leg for the call.
This rate is different from the configuration rate because of
rate negotiation during the call."
::= { cvCommonDcCallHistoryEntry 3 }
cvCommonDcCallHistoryCodecBytes OBJECT-TYPE
SYNTAX INTEGER (10..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the payload size of the voice packet."
::= { cvCommonDcCallHistoryEntry 4 }
cvCommonDcCallHistoryInBandSignaling OBJECT-TYPE
SYNTAX CvcInBandSignaling
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the type of in-band signaling used on the call."
::= { cvCommonDcCallHistoryEntry 5 }
cvCommonDcMIBNotificationPrefix OBJECT IDENTIFIER ::=
{ ciscoVoiceCommonDialControlMIB 2 }
cvCommonDcMIBNotifications OBJECT IDENTIFIER ::=
{ cvCommonDcMIBNotificationPrefix 0 }
cvCommonDcMIBConformance OBJECT IDENTIFIER ::=
{ ciscoVoiceCommonDialControlMIB 3 }
cvCommonDcMIBCompliances OBJECT IDENTIFIER ::=
{ cvCommonDcMIBConformance 1 }
cvCommonDcMIBGroups OBJECT IDENTIFIER ::=
{ cvCommonDcMIBConformance 2 }
cvCommonDcMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO VOICE COMMON MIB"
MODULE MANDATORY-GROUPS
{ cvCommonDcCallGroup }
::= { cvCommonDcMIBCompliances 1 }
cvCommonDcCallGroup OBJECT-GROUP
OBJECTS {
cvCommonDcCallActiveConnectionId,
cvCommonDcCallActiveVADEnable,
cvCommonDcCallActiveCoderTypeRate,
cvCommonDcCallActiveCodecBytes,
cvCommonDcCallActiveInBandSignaling,
cvCommonDcCallHistoryConnectionId,
cvCommonDcCallHistoryVADEnable,
cvCommonDcCallHistoryCoderTypeRate,
cvCommonDcCallHistoryCodecBytes,
cvCommonDcCallHistoryInBandSignaling
}
STATUS current
DESCRIPTION
"A collection of objects providing the common network
call leg information."
::= { cvCommonDcMIBGroups 1 }
END