DTRConcentratorMIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises, Counter, TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
DisplayString
FROM RFC1213-MIB;
Counter32 ::= Counter
Integer32 ::= INTEGER
RowStatus ::= INTEGER {
active(1),
notInService(2),
notReady(3),
createAndGo(4),
createAndWait(5),
destroy(6)
}
MacAddress ::= OCTET STRING (SIZE(6))
InterfaceIndex ::= Integer32
IANAifType ::= INTEGER {
other(1),
regular1822(2),
hdh1822(3),
ddnX25(4),
rfc877x25(5),
ethernetCsmacd(6),
iso88023Csmacd(7),
iso88024TokenBus(8),
iso88025TokenRing(9),
iso88026Man(10),
starLan(11),
proteon10Mbit(12),
proteon80Mbit(13),
hyperchannel(14),
fddi(15),
lapb(16),
sdlc(17),
ds1(18),
e1(19),
basicISDN(20),
primaryISDN(21),
propPointToPointSerial(22),
ppp(23),
softwareLoopback(24),
eon(25),
ethernet3Mbit(26),
nsip(27),
slip(28),
ultra(29),
ds3(30),
sip(31),
frameRelay(32),
rs232(33),
para(34),
arcnet(35),
arcnetPlus(36),
atm(37),
miox25(38),
sonet(39),
x25ple(40),
iso88022llc(41),
localTalk(42),
smdsDxi(43),
frameRelayService(44),
v35(45),
hssi(46),
hippi(47),
modem(48),
aal5(49),
sonetPath(50),
sonetVT(51),
smdsIcip(52),
propVirtual(53),
propMultiplexor(54)
}
cisco OBJECT IDENTIFIER ::= { enterprises 9 }
catProd OBJECT IDENTIFIER ::= { cisco 1 }
cat2600 OBJECT IDENTIFIER ::= { catProd 111 }
cat2600Ts OBJECT IDENTIFIER ::= { cat2600 1 }
dtrMIBs OBJECT IDENTIFIER ::= { cat2600Ts 3 }
dtrConcMIB OBJECT IDENTIFIER ::= { dtrMIBs 1 }
dtrConcMIBObjects OBJECT IDENTIFIER ::= { dtrConcMIB 1 }
dtrConcMIBBase OBJECT IDENTIFIER ::= { dtrConcMIBObjects 1 }
dtrConcMIBSpTree OBJECT IDENTIFIER ::= { dtrConcMIBObjects 2 }
dtrConcMIBForwarding OBJECT IDENTIFIER ::= { dtrConcMIBObjects 3 }
dtrConcMIBMRI OBJECT IDENTIFIER ::= { dtrConcMIBObjects 4 }
dtrConcMIBStats OBJECT IDENTIFIER ::= { dtrConcMIBObjects 5 }
BridgeId ::= OCTET STRING (SIZE(8))
DynamicFdbStatus ::= INTEGER {
other(1),
invalid(2),
learned(3),
self(4),
mgmt(5)
}
StaticFdbStatus ::= INTEGER {
other(1),
invalid(2),
permanent(3),
deleteOnReset(4)
}
PortId ::= OCTET STRING(SIZE(2))
RouteDescriptor ::= OCTET STRING(SIZE(3))
Timeout ::= INTEGER (0..65535)
dtrConcentratorAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" MAC address used by DTR Concentrator for uniqueness. It must
be unique "
::= { dtrConcMIBBase 1 }
dtrOperNumberOfCrfs OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of Concentrator Relay Functions within the DTR
Concentrator. Min value is 1. Writing this object sets the number
of CRFs within the DTR Concentrator. "
::= { dtrConcMIBBase 2 }
dtrOperNumberOfBridgeRelays OBJECT-TYPE
SYNTAX INTEGER(0 | 1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of bridge relay functions within the DTR Concentrator.
Value of 0 or 1 is permitted. Writing this object sets the number of bridge
relay functions within the DTR Concentrator. "
::= { dtrConcMIBBase 3 }
dtrCRFTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrCRFEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This table contains information for each concentrator relay
function in the DTR Concentrator."
::= { dtrConcMIBBase 6 }
dtrCRFEntry OBJECT-TYPE
SYNTAX DtrCRFEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrCRFIndex }
::= { dtrCRFTable 1 }
DtrCRFEntry ::= SEQUENCE {
dtrCRFIndex INTEGER,
dtrCRFNumberOfPorts INTEGER,
dtrCRFPortMask OCTET STRING,
dtrCRFName DisplayString,
dtrCRFMaxInfo INTEGER,
dtrCRFMacAddress MacAddress,
dtrCRFLocalLanId INTEGER,
dtrCRFFdbAgingTime INTEGER,
dtrCRFMRIEnable INTEGER,
dtrCRFLearnedEntryDiscards Counter32
}
dtrCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrCRFEntry 1 }
dtrCRFNumberOfPorts OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of CRF Ports controlled by this CRF "
::= { dtrCRFEntry 2 }
dtrCRFPortMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The set of interfaces (ifIndex) that are associated
with this instance of a CRF.
Each Octet within the value of this object specifies a set
of eight interfaces, with the first octet specifying
interfaces (ifIndex) 1 through 8, the second octet specifying
interfaces 9 through 16 and so on. Within each octet, the
most significant bit represents the lowest numbered interface,
and the least significant bit represents the highest numbered
interface.
Writing this variable will modify the CRF configuration and update
the value contained in dtrCRFNumberOfPorts."
::= { dtrCRFEntry 3 }
dtrCRFName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The textual name of the CRF. The value of this obje should be the
name of the CRF as assigned by the DTR Concentrator and should
be suitable for use in commands entered at the DTR Concentrator 'console'"
::= { dtrCRFEntry 4 }
dtrCRFMaxInfo OBJECT-TYPE
SYNTAX INTEGER(1500..18200)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum size of the INFO field that the CRF can
transmit/receive "
::= { dtrCRFEntry 5 }
dtrCRFMacAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The MAC address ised with the dtrCRFSpTreePriority to form
the CRF Identifier used in the spanning tree protocol. This
address must be unique and it is recommended that this
address be the specific MAC address of the lowest numbered
C-Port. "
::= { dtrCRFEntry 6 }
dtrCRFLocalLanId OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This is the value of the local lan id used by the CRF. This value
may be assigned or may be learned by the CRF learning process.
Valid values range from 0 to 4095. Values outside this range
indicate that the lan id value has not been assigned or learned."
::= { dtrCRFEntry 7 }
dtrCRFFdbAgingTime OBJECT-TYPE
SYNTAX INTEGER(10..1000000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The timeout period in seconds for aging out dynamic entries from
the Filtering Database. Recommended default is 300 seconds. "
DEFVAL { 300 }
::= { dtrCRFEntry 8 }
dtrCRFMRIEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This object enables/disables the MRI function in the CRF "
::= { dtrCRFEntry 9 }
dtrCRFLearnedEntryDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The total number of CRF Filtering Database entries, which
have been or would have been learned, but have been discarded
due to a lack of space to store them in the Filtering
Database "
::= { dtrCRFEntry 10 }
dtrCRFPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrCRFPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This table contains information for each CRF Port in a Concentrator
Relay Function "
::= { dtrConcMIBBase 7 }
dtrCRFPortEntry OBJECT-TYPE
SYNTAX DtrCRFPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrCRFPortCRFIndex, dtrCRFPortNumber }
::= { dtrCRFPortTable 1 }
DtrCRFPortEntry ::= SEQUENCE {
dtrCRFPortCRFIndex INTEGER,
dtrCRFPortNumber INTEGER,
dtrCRFPortEnable INTEGER,
dtrCRFPortifIndex InterfaceIndex,
dtrCRFOperPortType IANAifType,
dtrCRFPortMtuExceededDiscards Counter32,
dtrCRFPortDelayExceededDiscards Counter32
}
dtrCRFPortCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying an instance of CRF "
::= { dtrCRFPortEntry 1 }
dtrCRFPortNumber OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF Port number for which this entry contains CRF
management information."
::= { dtrCRFPortEntry 2 }
dtrCRFPortifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A unique value, greater than zero that corresponds to the
interface this CRF Port is assigned (corresponds to ifIndex).
Writing this object defines the correspondence between the
CRF Port and the interface (C-Port or bridge relay function
interface as determined by dtrCRFOperPortType.)"
::= { dtrCRFPortEntry 3 }
dtrCRFPortEnable OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The enable/disable status of the CRF Port. This control can be
used to disable a port."
::= { dtrCRFPortEntry 4 }
dtrCRFOperPortType OBJECT-TYPE
SYNTAX IANAifType
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates the type of interface that this CRF Port is assigned to.
Only two types are permitted, a C-Port and an interal bridge
relay function.
Write this object to set the type of interface."
::= { dtrCRFPortEntry 5 }
dtrCRFPortMtuExceededDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of frames discarded by the CRF Port due to excessive
size (exceeds CrfMaxInfo) "
::= { dtrCRFPortEntry 6 }
dtrCRFPortDelayExceededDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of frames discarded by the CRF Port due to excessive
delay through the CRF "
::= { dtrCRFPortEntry 7 }
dtrSpanningTreeHoldTime OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum time period, in seconds, elapsing between the
transmission of Configuration PDUs through a given port (CRFP
or internal bridge). This is a fixed parameter of the DTR
Concentrator used by all member CRF and bridge entities. Value
specified by 802.1d is 1 second "
::= { dtrConcMIBSpTree 1 }
dtrSpanningTreeProtocolSpecification OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ieee8021d(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" An indication of what version of the Spanning Tree Protocol is
being run on the DTR Concentrator "
::= { dtrConcMIBSpTree 2 }
dtrSpanningTreeTimeSinceTopoChange OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The time (in 1/100ths of a second) since the last topology
change was detected by the CRF or bridge entities within the
DTR Concentrator. "
::= { dtrConcMIBSpTree 3 }
dtrSpanningTreeTopologyChanges OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The total number of topology changes detected by this
concentrator since the management entity was last reset or
initialized "
::= { dtrConcMIBSpTree 4 }
dtrSpanningTreeBridgeForwardDelay OBJECT-TYPE
SYNTAX Timeout(400..3000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of the Forward Delay parameter when the entity (CRF or
bridge) is the Root or is attempting to become the Root. The
granularity of this timer is 1 second. "
::= { dtrConcMIBSpTree 5 }
dtrSpanningTreeBridgeHelloTime OBJECT-TYPE
SYNTAX Timeout(100..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of the Hello Time parameter when the entity (CRF or
Bridge) is the Root or attempting to become the Root. The time
interval between transmissions of Topology Change Notification
PDUs. The granularity of this timer is 1 second. "
::= { dtrConcMIBSpTree 6 }
dtrSpanningTreeTreeBridgeMaxAge OBJECT-TYPE
SYNTAX INTEGER(600..4000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of the Max Age parameter when the entity (CRF or
bridge) is the Root or is attempting to become the Root.
The granularity of this timer is 1 second. "
::= { dtrConcMIBSpTree 7 }
dtrCRFSpTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrCRFSpTreeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains the spanning tree information for each CRF."
::= { dtrConcMIBSpTree 9 }
dtrCRFSpTreeEntry OBJECT-TYPE
SYNTAX DtrCRFSpTreeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrCRFSpTreeCRFIndex }
::= { dtrCRFSpTreeTable 1 }
DtrCRFSpTreeEntry ::= SEQUENCE {
dtrCRFSpTreeCRFIndex INTEGER,
dtrCRFSpTreePriority INTEGER,
dtrCRFSpTreeDesignatedRoot BridgeId,
dtrCRFSpTreeRootCost Integer32,
dtrCRFSpTreeRootPort Integer32,
dtrCRFSpTreeMaxAge Timeout,
dtrCRFSpTreeHelloTime Timeout,
dtrCRFSpTreeForwardDelay Timeout
}
dtrCRFSpTreeCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrCRFSpTreeEntry 1 }
dtrCRFSpTreePriority OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of the write-able portion of the CRF Identifier and the
first two octets of the CRF Identifier. The last 6 octets of the
CRF ID are given by the value of dtrCRFMacAddress. "
::= { dtrCRFSpTreeEntry 2 }
dtrCRFSpTreeDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The bridge identifier of the root of the spanning tree as
determined by the spanning tree protocol executed at this node "
::= { dtrCRFSpTreeEntry 3 }
dtrCRFSpTreeRootCost OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The cost of the path to the root as seen from this CRF "
::= { dtrCRFSpTreeEntry 4 }
dtrCRFSpTreeRootPort OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The CRF Port number of the CRF Port which offers the lowest cost
path from this CRF to the root "
::= { dtrCRFSpTreeEntry 5 }
dtrCRFSpTreeMaxAge OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The maximum age of Spanning Tree Protocol information learned
from the network on any port (CRF or bridge within the DTR
Concentrator) before it is discarded. Units are in 1/100th of
a second. This is the actual value currently in use"
::= { dtrCRFSpTreeEntry 6 }
dtrCRFSpTreeHelloTime OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The amount of time between transmission of Configuration bridge
PDUs used by a CRF that is attempting to become the Root or is
the Root. This is the value currently in use "
::= { dtrCRFSpTreeEntry 7 }
dtrCRFSpTreeForwardDelay OBJECT-TYPE
SYNTAX Timeout
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This time value, measured in 1/100th of a second, is used to
control the amount of time spent in the Listening state when
moving from the Blocking state to the Listening state and the
amount of time in the Learning state when moving from the
Learning state to the Forwarding state. This time value is used
for ageing dynamic entries in the Filtering Database while the
Topology Change flag is set in protocol messages received from
the root. This is the value the CRF is currently using "
::= { dtrCRFSpTreeEntry 8 }
dtrCRFPortSpTreeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrCRFPortSpTreeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains spanning tree information for each CRF Port."
::= { dtrConcMIBSpTree 10 }
dtrCRFPortSpTreeEntry OBJECT-TYPE
SYNTAX DtrCRFPortSpTreeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrCRFPortSpTreeCRFIndex, dtrCRFPortSpTreeNumber }
::= { dtrCRFPortSpTreeTable 1 }
DtrCRFPortSpTreeEntry ::= SEQUENCE {
dtrCRFPortSpTreeCRFIndex INTEGER,
dtrCRFPortSpTreeNumber INTEGER,
dtrCRFPortSpTreePriority INTEGER,
dtrCRFPortSpTreeState INTEGER,
dtrCRFPortSpTreePathCost INTEGER,
dtrCRFPortSpTreeDesignatedRoot BridgeId,
dtrCRFPortSpTreeDesignatedCost Integer32,
dtrCRFPortSpTreeDesignatedBridge BridgeId,
dtrCRFPortSpTreeDesignatedPort PortId,
dtrCRFPortSpTreeForwardTransitions Counter32
}
dtrCRFPortSpTreeCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrCRFPortSpTreeEntry 1 }
dtrCRFPortSpTreeNumber OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The CRF Port number for which this entry contains CRF
management information."
::= { dtrCRFPortSpTreeEntry 2 }
dtrCRFPortSpTreePriority OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of the priority field which is contained in the
first byte of the CRF Port Identifier. The second byte of
the CRF Port Identifier is given by the value of CRF Port as
identified by dtrCRFPortSpTreeNumber"
::= { dtrCRFPortSpTreeEntry 3 }
dtrCRFPortSpTreeState OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
blocking(2),
listening(3),
learning(4),
forwarding(5),
broken(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The CRF Port state as defined by the Spanning Tree. If the DTR
concentrator detects that a port is malfunctioning, it will place
that port into the broken(6) state. the states are defined as:
disabled(1), blocking(2), listening(3), learning(4), forwarding(5),
and broken(6). "
::= { dtrCRFPortSpTreeEntry 4 }
dtrCRFPortSpTreePathCost OBJECT-TYPE
SYNTAX INTEGER(1..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The contribution of the path through this CRF Port,
identified by dtrCRFPortSpTreeNumber when the CRF Port is the
Root Port, to the total cost of the path to the Root for this
CRF "
::= { dtrCRFPortSpTreeEntry 5 }
dtrCRFPortSpTreeDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The unique bridge identifier of the bridge recorded as the Root
in the root identifier parameter of the Configuration PDUs
transmitted by the designated bridge for the LAN to which the
CRF Port is attached. "
::= { dtrCRFPortSpTreeEntry 6 }
dtrCRFPortSpTreeDesignatedCost OBJECT-TYPE
SYNTAX Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The cost of the path to the Root offered by the Designated Port
on the LAN to which this CRF Port is attached "
::= { dtrCRFPortSpTreeEntry 7 }
dtrCRFPortSpTreeDesignatedBridge OBJECT-TYPE
SYNTAX BridgeId
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The unique Bridge or CRF Identifier of the Bridge or CRF believed to be the
Designated Bridge for the LAN associated with the CRF Port "
::= { dtrCRFPortSpTreeEntry 8 }
dtrCRFPortSpTreeDesignatedPort OBJECT-TYPE
SYNTAX PortId
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Port Identifier of the Bridge or CRF port believed to be the
Designated Port for the LAN associated with the CRF Port "
::= { dtrCRFPortSpTreeEntry 9 }
dtrCRFPortSpTreeForwardTransitions OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times this CRF Port, as identified by
dtrCRFPortSpTreeNumber, has transitioned from the Learning
state to the Forwarding State "
::= { dtrCRFPortSpTreeEntry 10 }
dtrFdbDynamicAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrFdbDynamicAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about specific dynamic MAC address
entries in the CRF Filtering Database."
::= { dtrConcMIBForwarding 1 }
dtrFdbDynamicAddrEntry OBJECT-TYPE
SYNTAX DtrFdbDynamicAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" CRF Filtering Database Dynamic MAC address entry"
INDEX { dtrFdbDynamicAddrCRFIndex, dtrFdbDynamicAddrStnAddress }
::= { dtrFdbDynamicAddrTable 1 }
DtrFdbDynamicAddrEntry ::= SEQUENCE {
dtrFdbDynamicAddrCRFIndex INTEGER,
dtrFdbDynamicAddrStnAddress MacAddress,
dtrFdbDynamicAddrPortNumber INTEGER,
dtrFdbDynamicAddrStatus DynamicFdbStatus
}
dtrFdbDynamicAddrCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrFdbDynamicAddrEntry 1 }
dtrFdbDynamicAddrStnAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A unicast MAC address for which the CRF has forwarding
information. This object is updated by the Learning Process in
the CRF."
::= { dtrFdbDynamicAddrEntry 2 }
dtrFdbDynamicAddrPortNumber OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The CRF Port number of the CRF Port that a frame with an
address matching dtrFdbDynamicAddrStnAddress in this
dtrFdbDynamicAddrTable Entry has been seen. A value of zero
is assigned when dtrFdbDynamicAddrStnAddress is known, but
the CRF Port number (dtrFdbDynamicAddrPortNumber) has not
been learned."
::= { dtrFdbDynamicAddrEntry 3 }
dtrFdbDynamicAddrStatus OBJECT-TYPE
SYNTAX DynamicFdbStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Status of this entry. Other (1) indicates that some other
MIB object is being used to determine how/if the frame is
forwarded. Invalid(2) indicates this entry is no longer
valid, but has not been flushed from the table. Learned(3)
indicates that dtrFdbDynamicAddrPortNumber for this entry was
learned. Self(4) indicates dtrFdbDynamicAddrStnAddress
represents one of the CRF Port Addresses. Mgmt(5) indicates
dtrFdbDynamicAddrStnAddress is also a value of an existing
dtrFdbStaticAddrStnAddress"
::= { dtrFdbDynamicAddrEntry 4 }
dtrFdbStaticAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrFdbStaticAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about specific static MAC address
entries in the CRF Filtering Database. "
::= { dtrConcMIBForwarding 2 }
dtrFdbStaticAddrEntry OBJECT-TYPE
SYNTAX DtrFdbStaticAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" CRF Filtering Database Static MAC Address Entry "
INDEX { dtrFdbStaticAddrCRFIndex, dtrFdbStaticAddrStnAddress }
::= { dtrFdbStaticAddrTable 1 }
DtrFdbStaticAddrEntry ::= SEQUENCE {
dtrFdbStaticAddrCRFIndex INTEGER,
dtrFdbStaticAddrStnAddress MacAddress,
dtrFdbStaticAddrRowStatus RowStatus,
dtrFdbStaticAddrInMask OCTET STRING,
dtrFdbStaticAddrOutMask OCTET STRING,
dtrFdbStaticAddrStatus StaticFdbStatus
}
dtrFdbStaticAddrCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrFdbStaticAddrEntry 1 }
dtrFdbStaticAddrStnAddress OBJECT-TYPE
SYNTAX MacAddress
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The MAC address for this entry. It may include group or broadcast
addresses."
::= { dtrFdbStaticAddrEntry 2 }
dtrFdbStaticAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allows creation and deletion of static entries. "
::= { dtrFdbStaticAddrEntry 3 }
dtrFdbStaticAddrInMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The set of CRF Ports which receive frames with a
destination address matching the address specified by the
DtrFdbStaticAddrStnAddress in this entry that may forward
this frame to any output CRF Port indicated by
DtrFdbStaticAddrOutMask. Each octet within the value of this
object specifies a set of eight ports, with the first octet
specifying CRF Ports 1 through 8, the second octet specifying
CRF Ports 9 through 16 and so on. Within each octet, the
most significant bit represents the lowest numbered port,
and the least significant bit represents the highest numbered
port. "
::= { dtrFdbStaticAddrEntry 4 }
dtrFdbStaticAddrOutMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The set of CRF Ports to which frames with a destination
address matching the address specified by the
DtrFdbStaticAddrStnAddress in this entry may be forwarded to.
Each octet within the value of this object specifies a set of
eight ports, with the first octet specifying CRF Ports 1
through 8, the second octet specifying CRF Ports 9 through 16
and so on. Within each octet, the most significant bit
represents the lowest numbered port, and the least
significant bit represents the highest numbered port."
::= { dtrFdbStaticAddrEntry 5 }
dtrFdbStaticAddrStatus OBJECT-TYPE
SYNTAX StaticFdbStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Status of this entry. Other(1) indicates this entry is currently
in use under conditions different from the available status
definitions that follow. Invalid(2) indicates this entry is no
longer valid, but has not been flushed from the table. Writing
this value to the object removes the entry. Permanent(3) indicates
that the entry is currently in use and will remain so after the
next reset. DeleteOnReset(4) indicates the entry is currently in
use and will remain so until the next reset. "
::= { dtrFdbStaticAddrEntry 6 }
dtrFdbDynamicRDTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrFdbDynamicRDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about a specific dynamic route
descriptor entry in the CRF Filtering Database. "
::= { dtrConcMIBForwarding 3 }
dtrFdbDynamicRDEntry OBJECT-TYPE
SYNTAX DtrFdbDynamicRDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrFdbDynamicRDCRFIndex, dtrFdbDynamicRDRouteDesc }
::= { dtrFdbDynamicRDTable 1 }
DtrFdbDynamicRDEntry ::= SEQUENCE {
dtrFdbDynamicRDCRFIndex INTEGER,
dtrFdbDynamicRDRouteDesc RouteDescriptor,
dtrFdbDynamicRDPortNumber INTEGER,
dtrFdbDynamicRDStatus DynamicFdbStatus
}
dtrFdbDynamicRDCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrFdbDynamicRDEntry 1 }
dtrFdbDynamicRDRouteDesc OBJECT-TYPE
SYNTAX RouteDescriptor
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A Route Descriptor for which the CRF has forwarding
information. The Route Descriptor (RD) consists of 2 parts; a 4
bit Bridge Number and a 12 bit LAN ID. This identifies a bridge
(BN) that has a port on the local LAN and a port connected to the
indicated LAN ID. This object consists of 3 octets. The first
octet contains the BN in the 4 least significant bits. The
second octet contains the most significant octet of the LAN ID
and the final octet contains the least significant 4 bits of the
LAN ID in the 4 most significant bits of the octet. "
::= { dtrFdbDynamicRDEntry 2 }
dtrFdbDynamicRDPortNumber OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The CRF Port number of the CRF Port that a frame with a
Route Descriptor matching dtrFdbDynamicRDRouteDesc in this
DtrFdbDynamicRDEntry has been seen. A value of zero is
assigned when dtrFdbDynamicRDRouteDesc is known, but the CRF
Port number has not been learned "
::= { dtrFdbDynamicRDEntry 3 }
dtrFdbDynamicRDStatus OBJECT-TYPE
SYNTAX DynamicFdbStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of this entry. Other (1) indicates that some other
MIB object is being used to determine how/if the frame is
forwarded. Invalid (2) indicates this entry is no longer
valid, but has not been flushed from the table. Learned (3)
indicates that dtrFdbDynamicRDPortNumber for this entry was
learned. Self(4) indicates dtrFdbDynamicRDRouteDesc
represents a relay across the Bridge relay function of this
DTR Concentrator. Mgmt(5) indicates dtrFdbDynamicRDRouteDesc
is also a value of an existing dtrFdbStaticRDRouteDesc in the
dtrFdbStaticRDTable."
::= { dtrFdbDynamicRDEntry 4 }
dtrFdbStaticRDTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrFdbStaticRDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing information about specific static route
descriptor entries in the CRF Filtering Database."
::= { dtrConcMIBForwarding 5 }
dtrFdbStaticRDEntry OBJECT-TYPE
SYNTAX DtrFdbStaticRDEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrFdbStaticRDCRFIndex, dtrFdbStaticRDRouteDesc }
::= { dtrFdbStaticRDTable 1 }
DtrFdbStaticRDEntry ::= SEQUENCE {
dtrFdbStaticRDCRFIndex INTEGER,
dtrFdbStaticRDRouteDesc RouteDescriptor,
dtrFdbStaticRDRowStatus RowStatus,
dtrFdbStaticRDPortNumber INTEGER,
dtrFdbStaticRDStatus StaticFdbStatus
}
dtrFdbStaticRDCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrFdbStaticRDEntry 1 }
dtrFdbStaticRDRouteDesc OBJECT-TYPE
SYNTAX RouteDescriptor
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Static Entries contain route descriptor information for
internal Bridge Ports. These entries are added as part of the
initialization of the DTR Concentrator when an internal bridge
relay function is enabled (dtrOperNumberOfBridgeRelays=1)
The Route Descriptor (RD) consists of 2 parts; a
4 bit Bridge Number and a 12 bit LAN ID. This identifies a
bridge (BN) that has a port on the local LAN and a port
connected to the indicated LAN ID. This object consists of 3
octets. The first octet contains the BN in the 4 least
significant bits. The second octet contains the most
significant octet of the LAN ID and the final octet contains
the least significant 4 bits of the LAN ID in the 4 most
significant bits of the octet. "
::= { dtrFdbStaticRDEntry 2 }
dtrFdbStaticRDRowStatus OBJECT-TYPE
SYNTAX RowStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allows creation and deletion of static entries"
::= { dtrFdbStaticRDEntry 3 }
dtrFdbStaticRDPortNumber OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The CRF Port number of the CRF Port that a frame with a
Route Descriptor matching dtrFdbStaticRDRouteDesc in this
DtrFdbStaticRDEntry is forwarded to."
::= { dtrFdbStaticRDEntry 4 }
dtrFdbStaticRDStatus OBJECT-TYPE
SYNTAX StaticFdbStatus
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Status of this entry. Other (1) indicates this entry is currently
in use under conditions different from the available status
definitions that follow. Invalid(2) indicates this entry is no
longer valid, but has not been flushed from the table. Writing
this value to the object removes the entry. Permanent (3) indicates
that the entry is currently in use and will remain so after the next
reset. DeleteOnReset(4) indicates the entry is currently in use and
will remain so until the next reset."
::= { dtrFdbStaticRDEntry 5 }
dtrMRITable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrMRIEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains information about the CRF port out
mask for specific management functions. "
::= { dtrConcMIBMRI 1 }
dtrMRIEntry OBJECT-TYPE
SYNTAX DtrMRIEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrMRICRFIndex, dtrMRIMgmtType }
::= { dtrMRITable 1 }
DtrMRIEntry ::= SEQUENCE {
dtrMRICRFIndex INTEGER,
dtrMRIMgmtType INTEGER,
dtrMRIOutMask OCTET STRING
}
dtrMRICRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrMRIEntry 1 }
dtrMRIMgmtType OBJECT-TYPE
SYNTAX INTEGER(0..15)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Identifies the function class for this entry. The MRI
forwards frames with a destination class equal to
dtrMRIMgmtType using the corresponding mask entry
(dtrMRIOutMask). When the destination class is 0 and the
source class is not 0, the destination address in the MAC
frame is used to forward the frame. MAC frames with a
destination class not found in this table are not forwarded
by the MRI."
::= { dtrMRIEntry 2 }
dtrMRIOutMask OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The set of CRF Ports to which frames with a destination
class matching the function class specified by the
dtrMRIMgmtType in this entry may be forwarded to. Each octet
within the value of this object specifies a set of eight
ports, with the first octet specifying CRF Ports 1 through 8,
the second octet specifying CRF Ports 9 through 16 and so on.
Within each octet, the most significant bit represents the
lowest numbered port, and the least significant bit
represents the highest numbered port. "
::= { dtrMRIEntry 3 }
dtrCRFPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF DtrCRFPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This table contains the counters for each CRF Port."
::= { dtrConcMIBStats 1 }
dtrCRFPortStatsEntry OBJECT-TYPE
SYNTAX DtrCRFPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { dtrCRFPortStatsCRFIndex, dtrCRFPortStatsPortNumber }
::= { dtrCRFPortStatsTable 1 }
DtrCRFPortStatsEntry ::= SEQUENCE {
dtrCRFPortStatsCRFIndex INTEGER,
dtrCRFPortStatsPortNumber INTEGER,
dtrCRFPortStatsAreInFrames Counter32,
dtrCRFPortStatsAreOutFrames Counter32,
dtrCRFPortStatsInFrames Counter32,
dtrCRFPortStatsOutFrames Counter32,
dtrCRFPortStatsSrfInFrames Counter32,
dtrCRFPortStatsSrfOutFrames Counter32,
dtrCRFPortStatsSteInFrames Counter32,
dtrCRFPortStatsSteOutFrames Counter32,
dtrCRFPortStatsInvalidRI Counter32,
dtrCRFPortStatsInMisdirected Counter32,
dtrCRFPortStatsInDiscards Counter32
}
dtrCRFPortStatsCRFIndex OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF number identifying this instance of CRF "
::= { dtrCRFPortStatsEntry 1 }
dtrCRFPortStatsPortNumber OBJECT-TYPE
SYNTAX INTEGER(1..255)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The CRF Port number for which this entry contains CRF
management information. When the dtrCrfOperPortType
indicates a C-Port, the C-Port number is found in
dtrCRFPortConfigCPort."
::= { dtrCRFPortStatsEntry 2 }
dtrCRFPortStatsAreInFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ARE frames received at this CRF Port. This
count does not include ARE frames that have been misdirected
(final Lan Id does not match the local Lan Id maintained by
the CRF (dtrCRFLocalLanId))"
::= { dtrCRFPortStatsEntry 3 }
dtrCRFPortStatsAreOutFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ARE frames transmitted by this CRF Port.
This count does not include ARE frames that have been
misdirected (final Lan Id does not match the Local Lan Id
maintained by the CRF (dtrCRFLocalLanId)) "
::= { dtrCRFPortStatsEntry 4 }
dtrCRFPortStatsInFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of valid frames received by this CRF Port "
::= { dtrCRFPortStatsEntry 5 }
dtrCRFPortStatsOutFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of frames that have been transmitted by this
CRF Port. "
::= { dtrCRFPortStatsEntry 6 }
dtrCRFPortStatsSrfInFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of SRF frames that have been received by this
CRF Port and forwarded to another port on the CRF."
::= { dtrCRFPortStatsEntry 7 }
dtrCRFPortStatsSrfOutFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of SRF frames that have been transmitted by this
CRF Port."
::= { dtrCRFPortStatsEntry 8 }
dtrCRFPortStatsSteInFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of STE frames received at this CRF Port. This
count does not include STE frames that have been misdirected
(final Lan Id does not match the local Lan Id maintained by
the CRF (dtrCRFLocalLanId)). "
::= { dtrCRFPortStatsEntry 9 }
dtrCRFPortStatsSteOutFrames OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of STE frames transmitted by this CRF Port.
This count does not include STE frames that have been
misdirected (final Lan Id does not match the local Lan Id
maintained by the CRF (dtrCRFLocalLanId)). "
::= { dtrCRFPortStatsEntry 10 }
dtrCRFPortStatsInvalidRI OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Count of frames that were discarded due to a formatting error (i.e.
an odd RI length, or 0 RI length) (Reference 802.1d C4.2.1.1.3) "
::= { dtrCRFPortStatsEntry 11 }
dtrCRFPortStatsInMisdirected OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This is a count of source routed frames that have been
received at this CRF Port where the local Lan Id
(dtrCRFLocalLanId) is not present or is not last (explorer
frame). Explorer frames (ARE and STE) are broadcast to all
Forwarding CRF Ports. SRF frames are discarded if the DA is
specific and they are broadcast if the DA is multicast. "
::= { dtrCRFPortStatsEntry 12 }
dtrCRFPortStatsInDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of frames that have been discarded by the Forwarding
Process. This count may include frames that are discarded by the
Frame Reception process "
::= { dtrCRFPortStatsEntry 13 }
END