SNMP MIB Search

 An entry in the Traffic Parameter Descriptor extension
table.

This objects indicates the Service Category
specified by the Traffic Descriptor.
If it is defined, the setting of this
object determines the Service Category used
for the connection. This then limits the
possible Traffic Descriptor Types as follows:
Explicit
Service
Category       Type may only be
-----------------------------------------
cbr            atmNoClpNoScr.
atmClpNoTaggingNoScr
atmClpTaggingNoScr
atmNoClpNoScrCdvt
abr/ubr        atmNoTrafficDescriptor
atmNoClpNoScr.
atmNoClpNoScrCdvt
atmNoClpMcr -- ubr+/abr
atmNoClpMcrCdvt -- ubr+/abr
vbr            atmNoClpScr
atmClpNoTaggingScr
atmClpTaggingScr
atmClpScrMbsCdvt
atmNoClpScrMbsCdvt
-----------------------------------------
If the settings of Service Category and Traffic
Descriptor Type are not compatible, the row can
not be made active.

This object indicates the Service Category
derived from the Traffic Descriptor. If the
object atmTrafficExplicitServCategory has
a defined value, then this object mirrors
that value. If Explicit Service Category
has the value notDef, then this object
reflects the Service Category derived from
the Traffic Descriptor Type as follows:
Traffic Descriptor       Service
Type                 Category
-----------------------------------------
atmNoTrafficDescriptor   ubr
atmNoClpMcr              abr
atmNoClpMcrCdvt          abr
atmNoClpNoScr      --|
atmClpNoTaggingNoScr |-- cbr
atmClpTaggingNoScr   |
atmNoClpNoScrCdvt  --|
atmNoClpScr        --|
atmClpNoTaggingScr   |-- vbr-rt
atmClpScrMbsCdvt     |
atmNoClpScrMbsCdvt   |
atmClpTaggingScr   --|
-----------------------------------------

A human readable string that contains the unique name
of this Traffic Descriptor.
This object will return a zero-length string if value is
not set.

Provide additional information specifying traffic parameters
for a VC/VP.

This MIB module is an extension to traffic OIDs
and variables defined in rfc1695.

Specifies peak cell rate for CLP, and
cell delay variation tolerance:
Parameter 1: CLP=0+1 peak cell rate in
cells per second
Parameter 2: CDVT in cell-times
Parameter 3: not used
Parameter 4: not used
Parameter 5: not used.
This traffic descriptor is for cbr, abr
or ubr service categories, desiring to
specify the cdvt as well as pcr.

This traffic descriptor is for Peak
Cell Rate (PCR), Sustained Cell Rate (SCR),
Maximum Burst Size applied to SCR,
and Cell Delay Variation Tolerance
applied to PCR.
The use of the parameter vector for this type:
Parameter 1: CLP=0+1 peak cell rate in
cells per second
Parameter 2: CLP=0 sustained cell rate in
cells per second.
Parameter 3: maximum burst size in cells
Parameter 4: CDVT in cell-times
Parameter 5: not used.

This traffic descriptor is for Peak
Cell Rate (PCR), Sustained Cell Rate (SCR),
Maximum Burst Size applied to SCR,
and Cell Delay Variation Tolerance
applied to PCR.
The use of the parameter vector for this type:
Parameter 1: CLP=0+1 peak cell rate in
cells per second
Parameter 2: CLP=0+1 sustained cell rate in
cells per second.
Parameter 3: maximum burst size in cells
Parameter 4: CDVT in cell-times
Parameter 5: not used.

This traffic descriptor is for Peak
Cell Rate (PCR) and Minimum Cell Rate
(MCR).
The use of the parameter vector for this type:
Parameter 1: CLP=0+1 peak cell rate in
cells per second
Parameter 2: CLP=0+1 minimum cell rate in
cells per second.
Parameter 3: not used.
Parameter 4: not used.
Parameter 5: not used.

This traffic descriptor is for Peak
Cell Rate (PCR), Minimum Cell Rate (MCR),
and Cell Delay Variation Tolerance
applied to PCR.
The use of the parameter vector for this type:
Parameter 1: CLP=0+1 peak cell rate in
cells per second
Parameter 2: CDVT in cell-times
Parameter 3: CLP=0+1 minimum cell rate in
cells per second.
Parameter 4: not used.
Parameter 5: not used.

A collection of objects which provide extensions to  the
ATM Traffic Parameter Descriptor Table.

A collection of objects which provide additional
information for a management system.